You are on page 1of 2

Steel ZF7b (DIN 20MnCr5, AISI 5120)

Designation by Standards Brand Name ZF7b Ravne No. 767 Mat. No. DIN 20MnCr5 EN AISI 5120

Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.18 max. 0.40 1.15 1.15 max. 0.12 max. 0.30 - - max.Al=0.035, max.Cu=0.30

Description Special structural steel.

Applications Higher stressed components for automobile industry - gears, shafts, crankshafts, connecting rods, cam shafts, etc.

Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/mm2]: 210 Density [g/cm3]: 7.85

Soft Annealing Heat to 680-710oC, cool slowly. This will produce a maximum Brinell hardness of 217.

Intermediate Annealing Temperature: 620-650oC.

Carburizing Temperature: 850-880oC.

Hardening Harden from a temperature of 810-840oC followed by oil quenching or hot quenching 180-220oC.

Tempering Tempering temperature: 150-180oC.

Forging Hot forming temperature: 1050-850oC.

Machinability Component parts for the automobile industry - shafts, steering and driving parts.

Forms manufactured: Please see the Dimensional Sales Program.

Disclaimer The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2011 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.

You might also like