Professional Documents
Culture Documents
Page #
HOSE
All Valley Hose also carries a complete line of the following types of hose which will be included in
future catalogs. Call for applications and quotes.
• Extreme high pressure hydraulic hose, industrial hose, suction and discharge hose, fire hose,
water and air hose, stainless steel Teflon hose, ducting, and tubing.
HOSE ENDS
Hydraulic Hose Ends ………………………………………………………………………………………………………… 7
Hydraulic Hose Ends – Bite to the Wire …………………………………………………………………………………… 17
Hydraulic Hose Ends – Thermoplastic Couplings ………………………………………………………………………... 22
Refrigerant Hose Ends ……………………………………………………………………………………………………… 24
100R5 Reusable Hose Ends………………………………………………………………………………………………. 28
All Valley Hose also carries extreme high pressure hydraulic hose ends which will be included in
future catalogs. Call for quote.
All Valley hose also supplies industrial camlock fittings, combination nipple and hose menders,
and national pipe and hose thread ends and adapters. Many available in brass, stainless steel,
carbon steel, ductile iron and polypropylene.
(877)778-HOSE i
Catalog Contents
Page #
All Valley Hose is a full line distributor of Oetiker clamps which will be
included in future catalogs. Call for quote.
Quick Couplers
Hydraulic Quick Couplers ………………………………………………………………………………………………… 116
Mold Couplers and Plugs ………………………………………………………………………………………………… 123
Pneumatic – ARO/Lincoln/Universal ……………………………………………………………………………………. 125
Pneumatic – Automotive Standard ……………………………………………………………………………………… 126
Pneumatic – Industrial ……………………………………………………………………………………………………. 128
Straight Through Couplers ……………………………………………………………………………………………….. 129
Twist Couplers …………………………………………………………………………………………………………….. 131
All Valley Hose is a full line distributor of Stucchi Flat Face Couplers
which will be included in future catalogs. Call for quote.
Valves
Ball Valves …………………………………………………………………………………………………………………. 132
Gate Valves ………………………………………………………………………………………………………………... 133
Needle Valves and Drain Cocks ………………………………………………………………………………………… 134
Truck Valves ………………………………………………………………………………………………………………. 137
(877)778-HOSE ii
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
1/4” 1 .625” +200°F 2,750 11,000 4” 21 lbs
54MB-1
3/8” 1 .781” +200°F 2,250 9,000 5” 30 lbs
Standard Cover
1/2” 1 .906” +200°F 2,000 8,000 7” 37 lbs
1 Wire Hydraulic Hose 3/4” 1 1.187” +200°F 1,250 5,000 9.5” 52 lbs
SAE 100R1A 1” 1 1.500” +200°F 1,000 4,000 12” 75 lbs
1 Wire Braid Flame resistant cover. MSHA approved.
(877)778-HOSE Page 1
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
Page 2 www.allvalleyhose.com
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
1/4” 1 .492” +212°F 3,000 12,000 2” 13 lbs
R17
1 Wire Hydraulic Hose 3/8” 1 .649” +212°F 3,000 12,000 3” 19 lbs
3,000 PSI Constant 1/2” 1 .776” +212°F 3,000 12,000 4” 31 lbs
Working Pressure 5/8” 2 .945” +212°F 3,000 12,000 4” 38 lbs
SAE 100R17 3/4” 2 1.102” +212°F 3,000 12,000 5” 53 lbs
Reduced OD Import
1” 2 1.425” +212°F 3,000 12,000 6” 95 lbs
(877)778-HOSE Page 3
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
Page 4 www.allvalleyhose.com
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
1/4” -- .508” +200°F 5,000 20,000 2.00” 8 lbs
H58NC
Thermoplastic 3/8” -- .650” +200°F 4,000 16,000 2.50” 11 lbs
Hydraulic Hose 1/2” -- .815” +200°F 3,500 14,000 4.00” 16 lbs
Reduced OD Reduced OD 100R8 uses the same style fitting as 100R7 and can eliminate stocking two fitting styles.
Non-conductive
SAE100R8
Orange Cover
(877)778-HOSE Page 5
Hose
Bulk Hydraulic Hose
WORKING MIN BURST MIN. WEIGHT
HOSE # HOSE MAX
PRESSURE PRESSURE BEND PER 100
ID BRAIDS OD TEMP
(PSI) (PSI) RADIUS FT.
Page 6 www.allvalleyhose.com
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
(877)778-HOSE Page 7
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
Page 8 www.allvalleyhose.com
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
(877)778-HOSE Page 9
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
Page 10 www.allvalleyhose.com
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
6278V 3/8 9/16x18 3/8 7/8 4E64V 1/4 9/16x18 1/4 5/8
6245V 3/8 3/4x16 1/2 7/8 6E66V 3/8 11/16x16 3/8 3/4
8236V 1/2 3/4x16 1/2 7/8
6E68V 3/8 13/16x16 1/2 7/8
8239V 1/2 7/8x14 5/8 1
8E68V 1/2 13/16x16 1/2 7/8
12239V 3/4 1-1/16x12 3/4 1-1/4
8E70V 1/2 1x14 5/8 1-1/16
8E72V 1/2 1-3/16x12 3/4 1-1/4
Tube Repair 10E70V 5/8 1x14 5/8 1-1/16
Couplings
10E72V 5/8 1-3/16x12 3/4 1-1/4
12E72V 3/4 1-3/16x12 3/4 1-1/4
HOSE THREAD TUBE HEX NUT
PART # 16E76V 1 1-7/16x12 1 1-1/2
ID SIZE OD SIZE HEX
(877)778-HOSE Page 11
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
4A24V 1/4 9/16x18 1/4 .779 11/16 8A68V 1/2 13/16x16 1/2 2.512 15/16
4A26V 1/4 11/16x16 3/8 1.125 13/16 8A70V 1/2 1x14 5/8 2.760 1-1/8
10A70V 5/8 1x14 5/8 2.760 1-1/8
6A24V 3/8 9/16x18 1/4 .780 11/16
12A72V 3/4 1-3/16x12 3/4 3.779 1-3/8
6A26V 3/8 11/16x16 3/8 .902 13/16
16A76V 1 1-7/16x12 1 4.500 1-5/8
6A28V 3/8 13/16x16 1/2 1.150 15/16
8A26V 1/2 11/16x16 3/8 .900 13/16
8A28V 1/2 13/16x16 1/2 1.150 15/16 O-Ring for ORF Seal Couplings
8A30V 1/2 1x14 5/8 1.270 1-1/8
10A30V 5/8 1x14 5/8 1.270 1-1/8 THREAD TUBE
PART #
SIZE OD
10A32V 5/8 1-3/16x12 3/4 1.882 1-3/8
12A30V 3/4 1x14 5/8 1.270 1-1/8 4629x4 9/16x18 1/4
4629x6 11/16x16 3/8
12A32V 3/4 1-3/16x12 3/4 1.882 1-3/8
4629x8 13/16x16 1/2
16A36V 1 1-7/16x12 1 2.500 1-5/8 4629x10 1x14 5/8
20A40V 1-1/4 1-11/16x12 1-1/4 2.510 1-7/8 4629x12 1-3/16x12 3/4
Page 12 www.allvalleyhose.com
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
(877)778-HOSE Page 13
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
4T54V 1/4 1/4 R-1/4-19 5/8 4P44V 1/4 1/4 G-1/4-19 .91 3/4
6T56V 3/8 3/8 R-3/8-19 3/4 6P46V 3/8 3/8 G-3/8-19 .90 7/8
8T58V 1/2 1/2 R-1/2-14 7/8 8P48V 1/2 1/2 G-1/2-14 .87 1
12T62V 3/4 3/4 R-3/4-14 1-1/8 12P52V 3/4 3/4 G-3/4-14 1.31 1-1/4
“R” as part of thread size is ISO designation for tapered thread. “G” as part of thread size is ISO designation for parallel thread.
British Standard
Parallel 60° Male Pipe British Standard
(BSPP) Solid (BSPP) Female Swivel
Hex is olive color
90° Bend
British Standard
(BSPP) Female Swivel
60° Cone Female JIS 30° Flare
Parallel Pipe Swivel
Hex is olive color
Hex is olive color
HOSE BSPP THREAD HEX NUT
PART #
ID SIZE SIZE SIZE HEX
HOSE TUBE THREAD HEX NUT
PART #
481V 1/4 1/4 G-1/4-19 5/8 3/4 ID SIZE SIZE SIZE HEX
486V 1/4 3/8 G-3/8-19 3/4 7/8 4L04V 1/4 1/4 G-1/4-19 5/8 3/4
681V 3/8 3/8 G-3/8-19 3/4 7/8
6L06V 3/8 3/8 G-3/8-19 3/4 7/8
694V 3/8 1/2 G-1/2-14 3/4 1
881V 1/2 1/2 G-1/2-14 7/8 1 8L08V 1/2 1/2 G-1/2-14 7/8 1-1/16
1081V 5/8 5/8 G-5/8-14 15/16 1-3/16 12L12V 3/4 3/4 G-3/4-14 1-1/8 1-1/4
1281V 3/4 3/4 G-3/4-14 1-1/8 1-1/4
16L16V 1 1 G-1-11 1-3/8 1-1/2
1681V 1 1 G-1-11 1-3/8 1-1/2
2081V 1-1/4 1-1/4 G-1-1/4-11 1-11/16 1-7/8 “G” as part of thread size is ISO designation for parallel thread.
Page 14 www.allvalleyhose.com
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
HOSE THREAD TUBE HEX 4D58V 1/4 8mm M14x1.5 1.48 11/16
PART #
ID SIZE OD SIZE
4D60V 1/4 10mm M16x1.5 1.65 3/4
4M58V 1/4 M16x1.5 8mm 5/8
6D60V 3/8 10mm M16x1.5 1.65 3/4
4M60V 1/4 M18x1.5 10mm 11/16
6D62V 3/8 12mm M18x1.5 1.65 7/8
6M60V 3/8 M18x1.5 10mm 3/4
6M62V 3/8 M20x1.5 12mm 13/16 8D65V 1/2 15mm M22x1.5 1.93 1-1/16
8M66V 1/2 M24x1.5 16mm 7/8 12D72V 3/4 22mm M30x2.0 2.59 1-1/2
(877)778-HOSE Page 15
Hydraulic Hose Ends
For use with 100R1 and 100R2 thin cover, HY-PLUS I, II and III, 100R17, 100R3 and 100R4 hydraulic hose.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
12C75V 3/4 25mm M36x2.0 1-1/4 1-5/8 672V 3/8 3/8 3/4-20 3/4 7/8
16C80V 1 30mm M42x2.0 1-11/16 2 851V 1/2 1/2 7/8-20 7/8 1
Clamp Sleeve
Female Swivel DIN (for routing)
24° Seat (Heavy) For use with 100R1AT/100R2AT hose
90° Bend to provide support for routing clamps.
O-Ring Included
HOSE
PART #
HOSE TUBE THREAD DROP NUT ID
PART #
ID SIZE SIZE INCHES HEX
19VN 1/4
6H62V 3/8 12mm M20x1.5 1.953 1 25VN 3/8
6H64V 3/8 14mm M22x1.5 2.073 1-1/16 29VN 1/2
8H66V 1/2 16mm M24x1.5 2.050 1-1/8 35VN 5/8
39VN 3/4
Page 16 www.allvalleyhose.com
Hydraulic Hose Ends
Bite to the Wire
For use with 100R12 Four Spiral and 100R2 thin cover (3/4” – 2”) hydraulic hose. No skive required.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
NO SKIVE
100R12 CRIMP DIAMETER CHART British Standard (BSPP)
HOSE CRIMP
Female Swivel
HOSE TYPE
ID OD Hex is olive color
1/2 1.150
3/4 1.406 HOSE BSPP THREAD HEX NUT
PART #
ID SIZE SIZE SIZE HEX
1 1.705
100R12
1-1/4 2.035 GW10 8x8 1/2 1/2 G-1/2-14 7/8 1
1-1/2 2.285
GW10 12x12 3/4 3/4 G-3/4-14 1-1/8 1-1/4
2 2.895
3/4 1.406 GW10 16x16 1 1 G-1-11 1-3/8 1-1/2
1 1.705
“G” as part of thread size is ISO designation for parallel thread.
100R2AT 1-1/4 2.035
1-1/2 2.270
2 2.890
(877)778-HOSE Page 17
Hydraulic Hose Ends
Bite to the Wire
For use with 100R12 Four Spiral and 100R2 thin cover (3/4” – 2”) hydraulic hose. No skive required.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
GW09 8x6 1/2 3/8 9/16x18 7/8 11/16 GW11 12x12 3/4 3/4 1-1/16x12 1-1/8
GW09 8x8 1/2 1/2 3/4x16 7/8 7/8 GW11 16x16 1 1 1-5/16x12 1-1/2
GW09 8x10 1/2 5/8 7/8x14 7/8 1
GW09 8x12 1/2 3/4 1-1/16x12 1-1/8 1-1/4
GW09 12x12 3/4 3/4 1-1/16x12 1-1/8 1-1/4
O-Ring Face Seal (ORF)
GW09 12x14 3/4 7/8 1-3/16x12 1-1/4 1-1/2
Male Solid
GW09 12x16 3/4 1 1-5/16x12 1-3/8 1-1/2
GW09 16x12 1 3/4 1-1/16x12 1-3/8 1-1/4
GW09 16x16 1 1 1-5/16x12 1-3/8 1-1/2 HOSE TUBE THREAD HEX
PART #
ID SIZE SIZE SIZE
GW09 16x20 1 1-1/4 1-5/8x12 1-11/16 2
GW09 20x20 1-1/4 1-1/4 1-5/8x12 1-11/16 2 GW29 8x8 1/2 1/2 13/16x16 7/8
GW09 20x24 1-1/4 1-1/2 1-7/8x12 1-7/8 2-1/4 GW29 12x12 3/4 3/4 1-3/16x12 1-1/4
GW09 24x24 1-1/2 1-1/2 1-7/8x12 2-1/8 2-1/4 GW29 16x16 1 1 1-7/16x12 1-1/2
GW09 32x32 2 2 2-1/2x12 2-3/4 2-7/8
Page 18 www.allvalleyhose.com
Hydraulic Hose Ends
Bite to the Wire
For use with 100R12 Four Spiral and 100R2 thin cover (3/4” – 2”) hydraulic hose. No skive required.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
HOSE TUBE THREAD DROP NUT HOSE TUBE THREAD HEX NUT
PART # PART #
ID SIZE SIZE IN. HEX ID SIZE SIZE SIZE HEX
GW32 8x8 1/2 1/2 13/16x16 1.15 15/16 GW38 8x16 1/2 16mm M24x1.5 7/8 1-1/8
GW32 8x10 1/2 5/8 1x14 1.27 1-1/8 GW38 12x25 3/4 25mm M36x2.0 1-3/8 1-7/8
GW32 12x10 3/4 5/8 1x14 1.27 1-1/8
GW32 12x12 3/4 3/4 1-3/16x12 1.88 1-3/8
GW38 16x30 1 30mm M42x2.0 1-11/16 2
GW32 16x16 1 1 1-7/16x12 2.50 1-5/8
GW32 20x20 1-1/4 1-1/4 1-11/16x12 2.51 1-7/8
Split Flange
(Code 61) Straight
90° Bend O-Ring Face Seal
(ORF) Female Swivel PART #
HOSE FLANGE DIAMETER
ID SIZE INCHES
Long Drop
GW47 8x8 1/2 1/2 1.19
HOSE TUBE THREAD DROP NUT GW47 12x12 3/4 3/4 1.50
PART #
ID SIZE SIZE IN. HEX GW47 12x16 3/4 1 1.75
GW33 8x8 1/2 1/2 13/16x16 2.51 15/16 GW47 16x16 1 1 1.75
GW33 8x10 1/2 5/8 1x14 2.76 1-1/8 GW47 16x20 1 1-1/4 2.00
GW33 12x12 3/4 3/4 1-3/16x12 3.78 1-3/8 GW47 20x20 1-1/4 1-1/4 2.00
GW33 16x16 1 1 1-7/16x12 4.50 1-5/8 GW47 24x24 1-1/2 1-1/2 2.38
GW47 32x32 2 2 2.81
(877)778-HOSE Page 19
Hydraulic Hose Ends
Bite to the Wire
For use with 100R12 Four Spiral and 100R2 thin cover (3/4” – 2”) hydraulic hose. No skive required.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
Split Flange (Code 61) GW55 12x12 3/4 3/4 1.50 2.33
67 1/2° Bend GW55 12x16 3/4 1 1.75 2.33
Page 20 www.allvalleyhose.com
Hydraulic Hose Ends
Bite to the Wire
For use with 100R12 Four Spiral and 100R2 thin cover (3/4” – 2”) hydraulic hose. No skive required.
Compatible with most adjustable spiral crimp machines. Check crimp OD carefully.
(877)778-HOSE Page 21
Hydraulic Hose Ends
Thermoplastic Couplings
For use with SAE100R7 thermoplastic hydraulic hose, reduced O.D. 100R8 thermoplastic hydraulic hose, and
air hose. Couplings may be used in Couplamatic, Synflex, and Parker Hannifin swage machines.
Thermoplastic couplings may be swaged or crimped. Check crimp OD carefully.
PIPE
PART # HOSE ID
SIZE Female SAE 45° Swivel
3-03244 3/16 1/4
3-04244 1/4 1/4
HOSE THREAD TUBE
3-05244 5/16 1/4 PART #
ID SIZE OD
3-06246 3/8 3/8
3-08248 1/2 1/2 3-06A06 3/8 5/8-18 3/8
Page 22 www.allvalleyhose.com
Hydraulic Hose Ends
Thermoplastic Couplings
For use with SAE100R7 thermoplastic hydraulic hose, reduced O.D. 100R8 thermoplastic hydraulic hose, and
air hose. Couplings may be used in Couplamatic, Synflex, and Parker Hannifin swage machines.
Thermoplastic couplings may be swaged or crimped. Check crimp OD carefully.
3-06C46 3/8 5/8-18 3/8 .965 3-04845 1/4 1/2-20 5/16 1.770
3-06846 3/8 9/16-18 3/8 2.180
3-06848 3/8 3/4-16 1/2 2.430
3-08848 1/2 3/4-16 1/2 2.430
3-08850 1/2 7/8-14 5/8 2.570
90° Bend Inverted Flare
(877)778-HOSE Page 23
Refrigerant Hose Ends
R-12 and R-134A
For use with refrigerant hose. Compatible with R-12 and R-134A refrigerants. Fittings should be applied with
a “bubble crimp” to pass new coupling integrity performance requirements. Check crimp OD carefully.
Page 24 www.allvalleyhose.com
Refrigerant Hose Ends
R-12 and R-134A
For use with refrigerant hose. Compatible with R-12 and R-134A refrigerants. Fittings should be applied with
a “bubble crimp” to pass new coupling integrity performance requirements. Check crimp OD carefully.
Male O-Ring
Steel nut/ferrule – aluminum tube.
SAE 45° Female
Flare 45°
Steel nut/ferrule – aluminum tube.
HOSE THREAD TUBE
PART #
ID SIZE OD
HOSE THREAD TUBE DROP
BL1401 5/16 (#6) 5/8-18 3/8 PART #
ID SIZE OD IN.
BL1402 13/32 (#8) 3/4-18 1/2 BL1111 5/16 (#6) 5/8-18 3/8 .56
BL1403 1/2 (#10) 7/8-18 5/8 BL1112 13/32 (#8) 3/4-16 1/2 .63
BL1404 5/8 (#12) 1-1/16-16 3/4 BL1113 1/2 (#10) 7/8-14 5/8 .88
BL1114 5/8 (#12) 1-1/16-14 3/4 1.00
(877)778-HOSE Page 25
Refrigerant Hose Ends
R-12 and R-134A
For use with refrigerant hose. Compatible with R-12 and R-134A refrigerants. Fittings should be applied with
a “bubble crimp” to pass new coupling integrity performance requirements. Check crimp OD carefully.
BL1821 5/16 (#6) 5/8-18 3/8 1.50 SB2901 5/16 (#6) 5/8-18 3/8
BL1822 13/32 (#8) 3/4-16 1/2 1.75 SB2902 13/32 (#8) 3/4-16 1/2
BL1823 1/2 (#10) 7/8-14 5/8 2.00 SB2903 1/2 (#10) 7/8-14 5/8
SB2904 5/8 (#12) 1-1/16-14 3/4
SB2906 1/2 (#10) 3/4-16 1/2
Female Metric Threads SB2907 5/8 (#12) 7/8-14 5/8
Steel nut/ferrule – aluminum tube. SB2908 5/16 (#6) 3/4-16 1/2
Page 26 www.allvalleyhose.com
Refrigerant Hose Ends
R-12 and R-134A
For use with refrigerant hose. Compatible with R-12 and R-134A refrigerants. Fittings should be applied with
a “bubble crimp” to pass new coupling integrity performance requirements. Check crimp OD carefully.
Refrigerant O-Ring
Weld-On Beadlock Compatible with R-12 and R-134A refrigerant
TUBE
HOSE TUBE TUBE PART #
PART # SIZE
ID SIZE STYLE
4041 3/8
BL6601 5/16 (#6) 3/8 Aluminum 4042 1/2
BL6602 13/32 (#8) 1/2 Aluminum
4043 5/8
BL6603 1/2 (#10) 5/8 Aluminum
4044 3/4
BL6604 5/8 (#12) 3/4 Aluminum
BL6605 5/8 (#12) 5/8 Aluminum
SB6601 5/16 (#6) 3/8 Steel
SB6602 13/32 (#8) 1/2 Steel
SB6603 1/2 (#10) 5/8 Steel
SB6604 5/8 (#12) 3/4 Steel
SB6605 5/8 (#12) 5/8 Steel
(877)778-HOSE Page 27
100R5
Reusable Hose Ends
FEMALE HOSE
SAE Male Flare 4466-12-12 1-1/16-14 12
PART # Non-Mandrel
THREAD SIZE
4462 4462-6-6 5/8-18 6
Female SAE Swivel MALE HOSE
4462-12-12 1-1/16-14 12 PART #
Non-Mandrel O-RING SIZE
FEMALE HOSE
PIPE HOSE PART #
PART # THREAD SIZE
THREAD SIZE
420–4-4 7/16-20 4
4464 4464-2-4 1/8 4 420
4464-4-4 1/4 4 Female JIC 420-5-5 1/2-20 5
Male Pipe
Non-Mandrel 4464-4-5 1/4 5 Swivel 45° 420-6-6 9/16-18 6
4464-4-6 1/4 6 Non-Mandrel 420-8-8 3/4-16 8
4464-6-6 3/8 6 420-10-10 7/8-14 10
4464-6-8 3/8 8
420-12-12 1-1/16-12 12
4464-8-8 1/2 8
420-16-16 1-5/16-12 16
4464-8-10 1/2 10
4464-12-10 3/4 10
4464-12-12 3/4 12 FEMALE HOSE
PART #
THREAD SIZE
4464-12-16 3/4 16
4464-16-16 1 16 440-06-06 5/8-18 6
440
4464-20-20 1-1/4 20 Female SAE 440-12-12 1-1/16-14 12
4464-24-24 1-1/2 24 Swivel 45°
4464-32-32 2 32 Non-Mandrel
Page 28 www.allvalleyhose.com
100R5
Reusable Hose Ends
FEMALE HOSE
FEMALE HOSE PART #
PART # THREAD SIZE
THREAD SIZE
478-4-4 7/16-20 4
461 461-6-6* 9/16-18 6
Female JIC Swivel 461-12-12* 1-1/16-12 12
478 478-5-5 1/2-20 5
Mandrel 461-16-16* 1-5/16-12 16
Female JIC Swivel 478-6-6 9/16-18 6
90° Long 461-20-20 1-5/8 -12 20
478-8-8 3/4-16 8
Non-Mandrel 461-24-24* 1-7/8 -12 24
478-10-10 7/8-14 10
461-32-32 2-1/2-12 32
478-12-12 1-1/16-12 12
*ADD “B” TO PART # FOR BRASS
478-16-16 1-5/16-12 16
FEMALE HOSE
PART #
FEMALE HOSE THREAD SIZE
PART #
THREAD SIZE
462 462-4-4* 7/16-20 4
480-6-6 5/8-18 6 Female SAE Swivel 462-5-5 1/2-20 5
480 480-12-12 1-1/16-14 12 Mandrel Type 462-6-6* 5/8-18 6
Female SAE Swivel 462-8-8* 3/4-16 8
90° Long 462-10-10* 7/8-14 10
Non-Mandrel
462-12-12 1-1/16-14 12
*ADD “B” TO PART # FOR BRASS
MALE HOSE
PART #
THREAD SIZE
FEMALE HOSE
421 421-4-4 7/16-24 4
PART #
THREAD SIZE
Male Inverted
421-5-5 1/2-20 5 463 463-16-16 1-5/16-14 16
Swivel
421-5-6 1/2-20 6 Female PTT Swivel 463-20-20 1-5/8-14 20
Non-Mandrel
421-6-6 5/8-18 6 Mandrel 463-24-24 1-7/8-14 24
421-8-8 3/4-16 8 463-32-32 2-1/2-12 32
(877)778-HOSE Page 29
100R5
Reusable Hose Ends
Page 30 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
MALE FEMALE
PART # SIZE PART #
PIPE O-RING
3-902 1/8 31-2-4 1/8 1/4
3-903 3/16 31 31-2-5 1/8 5/16
3-9
3-904 1/4 Male Pipe to 31-4-4 1/4 1/4
Boss O-Ring 3-905 5/16 Female O-Ring 31-4-6 1/4 3/8
3-906 3/8
3-908 1/2 31-6-6 3/8 3/8
3-910 5/8 31-6-8 3/8 1/2
3-912 3/4 31-6-10 3/8 5/8
3-914 7/8 31-8-6 1/2 3/8
3-916 1 31-8-8 1/2 1/2
3-920 1-1/4 31-8-10 1/2 5/8
3-924 1-1/2 31-12-12 3/4 3/4
3-932 2
31-16-16 1 1
31-20-20 1-1/4 1-1/4
FEMALE FEMALE
PART # PIPE 31-24-24 1-1/2 1-1/2
PIPE
SWIVEL
23-2-2 1/8 1/8
23 23-2-4 1/8 1/4 PART #
MALE FEMALE
NPTF Rigid O-RING PIPE
23-4-4 1/4 1/4
Female to NPSF 23-4-6 1/4 3/8 32-2-2 1/8 1/8
Swivel Female 23-4-8 1/4 1/2 32 32-4-2 1/4 1/8
23-6-4 3/8 1/4 Male O-Ring to 32-4-4 1/4 1/4
23-6-6 3/8 3/8 Female Pipe 32-5-2 5/16 1/8
23-6-8 3/8 1/2 32-5-4 5/16 1/4
23-8-4 1/2 1/4 32-6-2 3/8 1/8
23-8-6 1/2 3/8 32-6-4 3/8 1/4
23-8-8 1/2 1/2 32-6-6 3/8 3/8
23-8-12 1/2 3/4 32-6-8 3/8 1/2
23-12-8 3/4 1/2 32-8-4 1/2 1/4
23-12-12 3/4 10 32-8-6 1/2 3/8
23-12-16 1-1/16-12 10 32-8-8 1/2 1/2
23-16-12 1-1/16-12 12
32-10-4 5/8 1/4
23-16-16 1-5/16-12 16
32-10-6 5/8 3/8
23-20-20 1-5/8-12 20
32-10-8 5/8 1/2
23-24-24 1-7/8-12 24
23-32-32 2-1/2-12 32 32-10-12 5/8 3/4
32-12-6 3/4 3/8
32-12-8 3/4 1/2
MALE MALE 32-12-12 3/4 3/4
PART #
O-RING PIPE
32-14-8 7/8 1/2
29-4-2 1/4 1/8 32-14-12 7/8 3/4
29 29-4-4 1/4 1/4 32-16-8 1 1/2
Male O-Ring to 29-6-4 3/8 1/4 32-16-12 1 3/4
Male Pipe 29-6-6 3/8 3/8 32-16-16 1 1
29-8-6 1/2 3/8
32-16-20 1 1-1/4
29-8-8 1/2 1/2
32-20-12 1-1/4 3/4
29-10-8 5/8 1/2
32-20-16 1-1/4 1
29-12-8 3/4 1/2
29-12-12 3/4 3/4 32-20-20 1-1/4 1-1/4
29-14-12 7/8 3/4 32-20-24 1-1/4 1-1/2
29-16-16 1 1 32-24-16 1-1/2 1
29-20-20 1-1/4 1-1/4 32-24-20 1-1/2 1-1/4
29-24-24 1-1/2 1-1/2 32-24-24 1-1/2 1-1/2
29-32-32 2 2 32-32-32 2 2
(877)778-HOSE Page 31
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 32 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
(877)778-HOSE Page 33
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
MALE FEMALE
FEMALE PART # JIC
MALE O-RING
PART # PIPE SWIVEL
PIPE
SWIVEL 52-4-4 1/4 1/4
46-2-2 1/8 1/8 52
Male O-Ring to 52-6-6 3/8 3/8
46-4-4 1/4 1/4
46 46-4-6 1/4 3/8 Female JIC 52-8-8 1/2 1/2
NPTM Male to 46-4-8 1/4 1/2 Swivel 52-10-10 5/8 5/8
NPSF Swivel 46-6-4 3/8 1/4 52-12-12 3/4 3/4
Female Tee 46-6-6 3/8 3/8 52-16-16 1 1
46-6-8 3/8 1/2
52-20-20 1-1/4 1-1/4
46-8-8 1/2 1/2
46-12-12 3/4 3/4
46-12-16 3/4 1 MALE FEMALE
PART # JIC
46-16-12 1 3/4 PIPE
SWIVEL
46-16-16 1 1 53-2-4 1/8 1/4
46-20-20 1-1/4 1-1/4 53
53-4-4 1/4 1/4
46-24-24 1-1/2 1-1/2 Male Pipe to
53-4-5 1/4 5/16
Female JIC
53-4-6 1/4 3/8
Swivel
FEMALE
FEMALE
53-6-6 3/8 3/8
PART # PIPE
PIPE 53-6-8 3/8 1/2
SWIVEL
47-2-2 1/8 1/8 53-6-10 3/8 5/8
47 47-4-4 1/4 1/4 53-8-8 1/2 1/2
NPTF Female to 47-6-6 3/8 3/8 53-8-10 1/2 5/8
NPSF Swivel 47-8-6 1/2 3/8 53-8-12 1/2 3/4
Female Tee 47-6-8 3/8 1/2 53-12-12 3/4 3/4
47-8-8 1/2 1/2 53-12-16 3/4 1
47-12-12 3/4 3/4 53-16-16 1 1
47-16-16 1 1 53-20-20 1-1/4 1-1/4
47-20-20 1-1/4 1-1/4 53-24-24 1-1/2 1-1/2
Page 34 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
JIS Komatsu
55-8-8 3/4 x 16 22 x 1.5(K) JIS TUBE
Swivel PART #
SIZE
55-12-12 1-1/16 x 12 M30 x 1.5(K) JIS
501-4-4 1/4
55-16-16 1-5/16 x 12 M33 x 1.5(K) JIS 501-6-6 3/8
501
90° Swivel Elbow – 501-8-8 1/2
Long Drop
MALE FEMALE Male JIC to Female 501-10-10 5/8
PART #
O-RING PIPE JIC Swivel
501-12-12 3/4
56-4-2 1/4 1/8
56 56-4-4 1/4 1/4
501-16-16 1
90° Male O-Ring 56-5-2 5/16 1/8 501-20-20 1-1/4
to Female Pipe
56-6-4 3/8 1/4
56-6-6 3/8 3/8
56-8-6 1/2 3/8 TUBE
PART #
SIZE
56-8-8 1/2 1/2
502-6-6 3/8
56-10-8 5/8 1/2 502
502-8-8 1/2
56-12-12 3/4 3/4 45° Swivel Elbow
Male JIC to Female 502-10-10 5/8
56-14-12 7/8 3/4
JIC Swivel
56-16-16 1 1 502-12-12 3/4
(877)778-HOSE Page 35
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 36 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
MALE MALE
PART # FEMALE
JIC PIPE PART #
JIC
816LL 816LL-4-2 1/4 1/8
820-2 1/8
Male JIC to Male Pipe 816LL-4-4 1/4 1/4 820-3 3/16
Extra Long 820
816LL-6-4 3/8 1/4 820-4 1/4
JIC Cap Nut 820-5 5/16
816LL-6-6 3/8 3/8
820-6 3/8
816LL-8-6 1/2 3/8 820-8 1/2
816LL-8-8 1/2 1/2 820-10 5/8
820-12 3/4
816LL-10-8 5/8 1/2 820-14 7/8
816LL-12-12 3/4 3/4 820-16 1
816LL-16-16 1 1 820-20 1-1/4
820-24 1-1/2
820-32 2
FEMALE
PART #
JIC
MALE
PART #
818-2 1/8 JIC
(877)778-HOSE Page 37
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 38 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
(877)778-HOSE Page 39
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Male Pipe
840-6-4 3/8 1/4 Hose Barb to Male 845-6-6 3/8 9/16-18
840-6-6 3/8 3/8 O-Ring
845-8-8 1/4 3/4-16
840-8-6 1/2 3/8
840-10-8 5/8 1/2 845-10-10 5/8 7/8-14
840-12-12 3/4 3/4 845-12-12 3/4 1-1/16-12
840-16-12 1 3/4
845-16-12 1 1-1/16-12
840-16-16 1 1
845-16-16 1 1-5/16-12
840-20-20 1-1/4 1-1/4
840-24-20 1-1/2 1-1/4 845-20-20 1-1/4 1-5/8-12
TUBE MALE
PART #
SIZE PIPE TUBE MALE
PART #
SIZE O-RING
842-4-2 1/4 1/8
842-4-4 1/4 1/4 846-4-4 1/4 7/16-20
842
90° Hose Barb to 842-6-4 3/8 1/4 846 846-6-6 3/8 9/16-18
Male Pipe 842-6-6 3/8 3/8 90° Hose Barb to
Male O-Ring 846-8-8 1/2 3/4-16
842-8-6 1/2 3/8
842-8-8 1/2 1/2 846-10-10 5/8 7/8-14
842-8-12 1/2 3/4 846-12-10 3/4 5/8
842-10-6 5/8 3/8
846-12-12 3/4 1-1/16-12
842-10-8 5/8 1/2
842-12-8 3/4 1/2 846-16-16 1 1-5/16-12
Page 40 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
(877)778-HOSE Page 41
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 42 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
MALE FEMALE
PART # JIC MALE FEMALE
JIC PART #
SWIVEL JIC PIPE
863-4-4 1/4 1/4
870 870-4-2 1/4 1/8
863 863-5-5 5/16 5/16
90° Male JIC to 863-6-6 3/8 3/8
Bulkhead 870-6-4 3/8 1/4
Female JIC Swivel Connector
863-8-8 1/2 1/2 870-8-6 1/2 3/8
Male JIC to Female
863-10-10 5/8 5/8 Pipe 870-10-8 5/8 1/2
863-12-12 3/4 3/4 Includes Locknut
870-12-12 3/4 3/4
863-14-14 7/8 7/8
863-16-16 1 1 870-16-16 1 1
863-20-20 1-1/4 1-1/4
863-24-24 1-1/2 1-1/2
MALE MALE
863-32-32 2 2 PART #
JIC PIPE
(877)778-HOSE Page 43
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
874-16-16 1 1 876-16-16 1 1
876-20-20 1-1/4 1-1/4
874-20-20 1-1/4 1-1/4
876-24-24 1-1/2 1-1/2
874-24-24 1-1/2 1-1/2
874-32-32 2 2
MALE FEMALE
PART #
JIC PIPE
886-4-2 1/4 1/8
MALE MALE
PART #
JIC PIPE 886 886-4-4 1/4 1/4
90° Male JIC to 886-4-6 1/4 3/8
875-4-2 1/4 1/8
875 Female Pipe 886-5-2 5/16 1/8
90° Male JIC to 875-4-4 1/4 1/4 886-5-4 5/16 1/4
Male Pipe 886-6-2 3/8 1/8
875-5-2 5/16 1/8
Long 886-6-4 3/8 1/4
875-5-4 5/16 1/4 886-6-6 3/8 3/8
875-6-4 3/8 1/4 886-6-8 3/8 1/2
886-8-4 1/2 1/4
875-6-6 3/8 3/8
886-8-6 1/2 3/8
875-8-6 1/2 3/8 886-8-8 1/2 1/2
886-8-12 1/2 3/4
875-8-8 1/2 1/2
886-10-8 5/8 1/2
875-8-12 1/2 3/4 886-12-8 3/4 1/2
875-10-8 5/8 1/2 886-12-12 3/4 3/4
886-14-12 7/8 3/4
875-12-12 3/4 3/4
886-16-12 1 3/4
875-16-16 1 1 886-16-16 1 1
886-20-20 1-1/4 1-1/4
875-20-20 1-1/4 1-1/4
886-24-24 1-1/2 1-1/2
875-24-24 1-1/2 1-1/2 886-32-32 2 2
Page 44 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
888-16-16 1 1
887-6-4 3/8 1/4
887-32-32 2 2 889-32-32 2 2
(877)778-HOSE Page 45
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 46 www.allvalleyhose.com
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
MALE FEMALE
PART #
MALE MALE PIPE PIPE
PART #
PIPE PIPE 915-2-2 1/8 1/8
911-2-2 1/8 1/8 915-4-4 1/4 1/4
911 915
911-4-2 1/4 1/8 915-6-6 3/8 3/8
Male Pipe Coupling 45° Street Elbow 915-8-8 1/2 1/2
911-4-4 1/4 1/4
915-12-12 3/4 3/4
911-6-2 3/8 1/8
915-16-16 1 1
911-6-4 3/8 1/4
915-20-20 1-1/4 1-1/4
911-6-6 3/8 3/8 915-24-24 1-1/2 1-1/2
911-8-4 1/2 1/4
911-8-6 1/2 3/8
FEMALE
911-8-8 1/2 1/2 PART #
PIPE
911-12-6 3/4 3/8
916-2 1/8
911-12-8 3/4 1/2 916-4 1/4
916
911-12-12 3/4 3/4 916-4-2 1/4 x 1/8
90° Female Pipe
911-16-8 1 1/2 Elbow 916-6 3/8
911-16-12 1 3/4 916-6-4 3/8 x 1/4
911-16-16 1 1 916-8 1/2
911-20-16 1-1/4 1 916-8-6 1/2 x 3/8
916-12 3/4
911-20-20 1-1/4 1-1/4
916-12-8 3/4 x 1/2
911-24-16 1-1/4 1
916-16-12 1 x 3/4
911-24-20 1-1/2 1-1/4 916-16 1
911-24-24 1-1/2 1-1/2 916-20 1-1/4
911-32-32 2 2 916-24 1-1/2
(877)778-HOSE Page 47
Adapters
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 48 www.allvalleyhose.com
Adapters – Flange Adapters
Standard part # in Steel
Add “SS” to part # for Stainless Steel
(877)778-HOSE Page 49
Adapters – Flange Adapters
Standard part # in Steel
Add “SS” to part # for Stainless Steel
507-32-32 2 2
Page 50 www.allvalleyhose.com
Adapters – Flareless Adapters
Standard part # in Steel
Add “SS” to part # for Stainless Steel
PART # PART #
724
711 Union Tee
Union
PART #
PART #
726
718 Male Run Tee
Nut
PART #
PART #
750
Male O-Ring
720 Connector
Cap Assembly
PART #
PART #
716
722 Male Connector
Male Elbow
(877)778-HOSE Page 51
Adapters – Flareless Adapters
Standard part # in Steel
Add “SS” to part # for Stainless Steel
PART # PART #
719 751
Sleeve Male O-Ring
Connector –
Long
PART #
PART #
721
90° Elbow Union 752
45° Male O-Ring
Elbow
723
45° Elbow Union 754
Male O-Ring
Run Tee
PART #
PART #
725
Male Branch 762
Tee 45° Female JIC
Elbow Swivel
PART #
PART #
732 764
Bulkhead Union Female JIC Run
Tee Swivel
Page 52 www.allvalleyhose.com
Adapters – Flareless Adapters
Standard part # in Steel
Add “SS” to part # for Stainless Steel
PART # PART #
763
786 90° Female JIC
90° Female Elbow Swivel
Elbow
PART #
PART #
765
788 Female JIC
Female Run Tee Branch Tee
Swivel
PART #
PART #
792 787
Reducer Female
Connector
PART #
PART #
753 789
90° Male O-Ring Female Branch
Elbow Tee
PART # PART #
755 794
Male O-Ring Bulkhead Nut
Branch Tee
(877)778-HOSE Page 53
Adapters - Metric
Standard part # in Steel
Add “SS” to part # for Stainless Steel
MALE MALE
PART # MALE FEMALE
JIC BSPP PART #
BSPP PIPE
816BSPP-4-2 1/4 1/8
320BSPP-4-4 1/4 1/4
816BSPP 816BSPP-4-4 1/4 1/4 320BSPP 320BSPP-6-6 3/8 3/8
Male JIC to 816BSPP-4-6 1/4 3/8 Male BSPP to 320BSPP-8-8 1/2 1/2
Male BSPP 816BSPP-4-8 1/4 1/2 Female Pipe 320BSPP-12-12 3/4 3/4
816BSPP-5-4 5/16 1/4 320BSPP-16-16 1 1
816BSPP-5-6 5/16 3/8 320BSPP-20-20 1-1/4 1-1/4
816BSPP-6-4 3/8 1/4
816BSPP-6-6 3/8 3/8 PART #
MALE FEMALE
816BSPP-6-8 3/8 1/2 METRIC PIPE
816BSPP-8-4 1/2 1/4 32MM-10-2 M10x1 1/8
816BSPP-8-6 1/2 3/8 32MM 32MM-12-2 M12x1.5 1/8
816BSPP-8-8 1/2 1/2 Male Metric 32MM-14-2 M14x1.5 1/8
816BSPP-8-12 1/2 3/4 to Female 32MM-14-4 M14x1.5 1/4
816BSPP-10-6 5/8 3/8 Pipe 32MM-16-2 M16x1.5 1/8
32MM-18-4 M18x1.5 1/4
816BSPP-10-8 5/8 1/2
32MM-18-6 M18x1.5 3/8
816BSPP-10-12 5/8 3/4
32MM-20-6 M20x1.5 3/8
816BSPP-12-8 3/4 1/2
32MM-22-6 M22x1.5 3/8
816BSPP-12-12 3/4 3/4 32MM-22-8 M22x1.5 1/2
816BSPP-12-16 3/4 1 32MM-24-8 M24x1.5 1/2
816BSPP-16-12 1 3/4 32MM-24-12 M24x1.5 3/4
816BSPP-16-16 1 1 32MM-27-12 M27x2 3/4
816BSPP-16-20 1 1-1/4 32MM-33-12 M33x2 3/4
816BSPP-20-20 1-1/4 1-1/4 32MM-42-16 M42x2 1
Page 54 www.allvalleyhose.com
Adapters - Metric
Standard part # in Steel
Add “SS” to part # for Stainless Steel
METRIC BSPP
PART # PART #
THREAD THREAD
714MM-10 10x1.0 806JIS-4 1/4-19
714MM 714MM-12 12x1.5 806JIS
806JIS-6 3/8-19
Male Metric 714MM-14 14x1.5 Male JIS Plug
Plug 714MM-16 16x1.5 30° Seat BSPP 806JIS-8 1/2-14
714MM-18 18x1.5 Thread 806JIS-12 3/4-14
714MM-20 20x1.5
714MM-22 22x1.5
714MM-24 24x1.5
BSPP
714MM-27 27x1.5 PART #
THREAD
820JIS-4 1/4-19
BSPP
820JIS
PART # 820JIS-6 3/8-19
THREAD Female JIS Cap
30° Seat BSPP 820JIS-8 1/2-14
714BSPP-2 1/8-28
714BSPP 714BSPP-4 1/4-19 Thread 820JIS-12 3/4-14
Male BSPP Plug 714BSPP-6 3/8-19
714BSPP-8 1/2-14
714BSPP-12 3/4-14 KOMATSU
PART #
714BSPP-16 1-11 THREAD
714BSPP-20 1-1/4-11 820KOM-14 14x1.5
820KOM
820KOM-18 18x1.5
Female Komatsu
PART #
BSPT Cap 820KOM-22 22x1.5
THREAD
30° Seat Metric 820KOM-24 24x1.5
714BSPT-2 1/8-28
714BSPT Thread 820KOM-30 30x1.5
714BSPT-4 1/4-19
Male BSPT Plug 714BSPT-6 3/8-19 820KOM-33 33x1.5
714BSPT-8 1/2-14
714BSPT-12 3/4-14
714BSPT-16 1-11 BSP
714BSPT-20 1-1/4-11 PART #
THREAD
DS04 1/4
DS
BSPP Dowty Bonded DS06 3/8
PART #
THREAD
Seal DS08 1/2
820BSPP-4 1/4
820BSPP 820BSPP-6 3/8 DS12 3/4
BSPP Cap 820BSPP-8 1/2 DS16 1
820BSPP-12 3/4 DS20 1-1/4
820BSPP-16 1
820BSPP-20 1-1/4 DS24 1-1/2
DS32 2
METRIC
PART #
THREAD
806KOM-14 14x1.5
806KOM 806KOM-18 18x1.5
Male Komatsu Plug 806KOM-22 22x1.5
30° Seat – Metric 806KOM-24 24x1.5
806KOM-30 30x1.5
Thread 806KOM-33 33x1.5
(877)778-HOSE Page 55
Adapters
Pipe Bushings/Caps/Plugs
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
Page 56 www.allvalleyhose.com
Adapters
Pipe Bushings/Caps/Plugs
Standard part # in Steel
Add “B” to part # for Brass – Add “SS” to part # for Stainless Steel
O-RING O-RING
PART # PART #
THREAD THREAD
714-2 1/8 714 CS-2 1/8
714 714-3 3/16 714CS 714 CS-3 3/16
Hex Head 714-4 1/4 Countersunk 714 CS-4 1/4
O-Ring Plug 714-5 5/16 O-Ring Plug 714 CS-5 5/16
714-6 3/8 714 CS-6 3/8
714-8 1/2 714 CS-8 1/2
714-10 5/8 714 CS-10 5/8
714-12 3/4 714 CS-12 3/4
714-14 7/8 714 CS-14 7/8
714-16 1 714 CS-16 1
714-20 1-1/4 714 CS-20 1-1/4
714-24 1-1/2 714 CS-24 1-1/2
714-32 2 714 CS-32 2
(877)778-HOSE Page 57
Air Brake
Hose Ends and Fittings
090145 3/8
Spring PIPE
090146 1/2 PART # HOSE ID THREAD LENGTH
0915540 3/8 1/4 2.44
HOSE PIPE
PART #
ID THREAD HOSE
PART #
ID
092687 3/8 1/4
093387 3/8 3/8 0916678 3/8
Male Connector
093385 1/2 3/8 Hose Mender 0933887 1/2
093386 1/2 1/2
Page 58 www.allvalleyhose.com
Air Brake
Hose Ends and Fittings
TUBE
PART #
SIZE TUBE
PART #
SIZE
20961x4 1/4
20961 64AB-4 1/4
20961x5 5/16
Nut (DOT) 64AB 64AB-6 3/8
20961x6 3/8
Union Tee 64AB-8 1/2
20961x8 1/2 64AB-10 5/8
(DOT)
20961x10 5/8 64AB-12 3/4
20961x12 3/4
TUBE
PART #
SIZE
TUBE
PART #
SIZE 65AB-4 1/4
262 AB 262AB-4 1/4 65AB-6 3/8
65AB
Union (DOT) 65AB-8 1/2
262AB-5 5/16 Union Elbow
262AB-6 3/8 (DOT) 65AB-10 5/8
262AB-8 1/2
262AB-10 5/8 PART #
TUBE PIPE
SIZE THREAD
262AB-12 3/4
69AB-4-2 1/4 1/8
69AB 69AB-4-4 1/4 1/4
PART #
TUBE PIPE 90° Male Elbow 69AB-4-6 1/4 3/8
SIZE THREAD 69AB-6-2 3/8 1/8
(DOT)
266AB-4-2 1/4 1/8 69AB-6-4 3/8 1/4
266AB 69AB-6-6 3/8 3/8
266AB-4-4 1/4 1/4
Female Connector 69AB-6-8 3/8 1/2
(DOT) 266AB-6-2 3/8 1/8
266AB-6-4 3/8 1/4 69AB-8-4 1/2 1/4
69AB-8-6 1/2 3/8
266AB-6-6 3/8 3/8
69AB-8-8 1/2 1/2
266AB-8-6 1/2 3/8 69AB-10-6 5/8 3/8
266AB-8-8 1/2 1/2 69AB-10-8 5/8 1/2
266AB-10-6 5/8 3/8 69AB-12-8 3/4 1/2
266AB-10-8 5/8 1/2 69AB-12-12 3/4 3/4
(877)778-HOSE Page 59
Air Brake
Hose Ends and Fittings
PART #
TUBE PIPE Nylon Air Brake Fittings
SIZE THREAD
Meets requirements of FMVSS571.106
70AB-4-2 1/4 1/8 Department of Transportation (DOT)
70AB
70AB-4-4 1/4 1/4 approved for air brake use.
90° Female Elbow
(DOT) 70AB-6-2 3/8 1/8
70AB-6-4 3/8 1/4
TUBE
70AB-6-6 3/8 3/8 PART #
SIZE
70AB-8-6 1/2 3/8 60NABx3 3/16
70AB-8-8 1/2 1/2 60NAB 60NABx4 1/4
70AB-10-8 5/8 1/2 Sleeve (DOT) 60NABx6 3/8
60NABx8 1/2
TUBE PIPE 60NABx10 5/8
PART #
SIZE THREAD
60NABx12 3/4
71AB-4-2 1/4 1/8
71AB 71AB-4-4 1/4 1/4
TUBE STRAIGHT
71AB-6-4 3/8 1/4 PART #
Male Run Tee SIZE THREAD
(DOT) 71AB-6-6 3/8 3/8 61NABx3 3/16 3/8 – 24
71AB-8-6 1/2 3/8 61NAB 61NABx4 1/4 7/16 – 24
71AB-8-8 1/2 1/2 Nut (DOT) 61NABx6 3/8 17/32 – 24
71AB-10-8 5/8 1/2 61NABx8 1/2 11/16 – 20
61NABx10 5/8 13/16 – 18
PART #
TUBE PIPE 61NABx12 3/4 1 – 18
SIZE THREAD
72AB-4-2 1/4 1/8
72AB PART #
TUBE STRAIGHT
72AB-4-4 1/4 1/4 SIZE THREAD
Male Branch Tee
(DOT) 72AB-6-2 3/8 1/8 62NABx5/32 5/32 7/32 – 24
62NAB
72AB-6-4 3/8 1/4 62NABx4 1/4 7/16 – 24
Union (DOT)
72AB-6-6 3/8 3/8 62NABx6 3/8 17/32 – 24
72AB-8-6 1/2 3/8 62NABx8 1/2 11/16 – 20
72AB-8-8 1/2 1/2 62NABx10 5/8 13/16 – 18
72AB-10-8 5/8 1/2 62NABx12 3/4 1 – 18
Page 60 www.allvalleyhose.com
Air Brake
Hose Ends and Fittings
(877)778-HOSE Page 61
Air Brake
Hose Ends and Fittings
Page 62 www.allvalleyhose.com
Air Line
Adapters and Manifolds
(877)778-HOSE Page 63
Brass – Bottle Gas Fittings
UL Approved for LP Gas Systems
TUBE
PART # HEX
SIZE PIPE
PART #
THREAD
BG22 BG22 1/4-18NPTF 7/8
POL (Tailpiece & BG28
BG22-LH 1/4-18NPTF 1-1/8
Nut Assembly) POL Connector BG28 1/4-18
to Female Pipe
PART #
PIPE
PART #
THREAD
BG24 BG24
POL Cap C06-72 3/8-27
POL Plug C06-80 3/8-27
PART #
BG24-P BG24-P
POL Plug
Page 64 www.allvalleyhose.com
Brass
Compression Fittings
TUBE TUBE
PART # PART #
SIZE SIZE
TUBE MALE
PART #
SIZE PIPE
TUBE
PART #
SIZE 268x2 1/8 1/8
268 268x3 3/16 1/8
261x2 1/8
Male Connector 268x3x4 3/16 1/4
261 261x3 3/16
268x4 1/4 1/8
Nut 261x4 1/4
268x4x4 1/4 1/4
261x5 5/16
268x4x6 1/4 3/8
261x6 3/8 268x4x8 1/4 1/2
261x7 7/16 268x5 5/16 1/8
261x8 1/2 268x5x4 5/16 1/4
261x10 5/8 268x5x6 5/16 3/8
261x12 3/4 268x6x2 3/8 1/8
261x14 7/8 268x6 3/8 1/4
268x6x6 3/8 3/8
268x6x8 3/8 1/2
TUBE 268x6x12 3/8 3/4
PART #
SIZE 268x7 7/16 1/4
295x2 1/8 268x8x4 1/2 1/4
295 268x8 1/2 3/8
295x3 3/16
Tube Insert 268x8x12 1/2 3/4
295x4 1/4
268x10x6 5/8 3/8
295x5 5/16 268x10x12 5/8 3/4
295x6 3/8 268x12 3/4 1/2
295x8 1/2 268x12x12 3/4 3/4
295x10 5/8 268x14 7/8 3/4
(877)778-HOSE Page 65
Brass
Compression Fittings
PART #
TUBE TUBE 266x8 1/2 3/8
SIZE SIZE
266x8x4 1/2 1/4
262x2 1/8 1/8
262 266x8x8 1/2 1/2
262x3x2 3/16 1/8
Double End
262x3 3/16 3/16 266x10 5/8 1/2
Union
262x4 1/4 1/4 266x10x6 5/8 3/8
262x4x2 1/4 1/8
266x10x12 5/8 3/4
262x4x3 1/4 3/16
262x5x4 5/16 1/4 266x12 3/4 1/2
262x5 5/16 5/16 266x12x12 3/4 3/4
262x6x4 3/8 1/4 266x14 7/8 3/4
262x6x5 3/8 5/16
262x6 3/8 3/8
262x7 7/16 7/16 PART #
TUBE TUBE TUBE
SIZE SIZE SIZE
262x8x6 1/2 3/8
262x8 1/2 1/2 264x2 1/8 1/8 1/8
262x10 5/8 5/8
264
Union Tee 264x3 3/16 3/16 3/16
262x10x6 5/8 3/8
264x4 1/4 1/4 1/4
262x10x8 5/8 1/2
262x12 3/4 3/4 264x5 5/16 5/16 5/16
262x14 7/8 7/8 264x6 3/8 3/8 3/8
264x6x6x4 3/8 3/8 1/4
TUBE MALE 264x8 1/2 1/2 1/2
PART #
SIZE PIPE
263x4 1/4 1/8 264x8x8x6 1/2 1/2 3/8
263 263x6 3/8 1/4 264x10 5/8 5/8 5/8
Ball Check
Connector 264x12 3/4 3/4 3/4
Page 66 www.allvalleyhose.com
Brass
Compression Fittings
(877)778-HOSE Page 67
Brass
Compression Fittings
260DSx4 1/4
PART #
TUBE PIPE 260DS 260DSx5 5/16
SIZE THREAD Delrin Sleeve 260DSx6 3/8
276x2 1/8 1/8
276x4 1/4 1/8 260DSx8 1/2
276
Tee With 260DSx10 5/8
Internal and 260DSx12 3/4
External Pipe
TUBE
PART #
SIZE
TUBE PIPE
PART #
SIZE THREAD
238 238x4 1/4
2905 Plug
2905x4 1/4 1/8
Tee With External
Pipe Thread on PART #
TUBE
Run and Internal SIZE
Pipe Thread On
2610 26104x4 1/4
Branch
Pilot Control Nut
TUBE
TUBE FEMALE PART #
PART # SIZE
SIZE PIPE
280x2 1/8
2908 2908x4 1/4 1/8 280
280x3 3/16
Female Branch Tee Sleeve
280x4 1/4
TUBE TUBE
PART # PART #
SIZE SIZE
Page 68 www.allvalleyhose.com
Brass Compression Fittings
Eaton & Fuller Style Air System Fittings
(877)778-HOSE Page 69
Brass
Pipe Fittings
STRAIGHT PIPE
PART # PART #
PIPE THREAD
23152x12 3/4
FEMALE
STRAIGHT
PART # PIPE
THREAD
23152x16 1
THREAD
22305x2 1/8 5/8 – 18
22305
22305x4 1/4 3/4 – 16 PIPE
Bulkhead Anchor PART #
THREAD
Connector 22305x4S 1/4 3/4 – 16
SHORT 23155x2 1/8
22305x6 3/8 1 – 14
23155
Countersunk Hex 23155x4 1/4
22305x8 1/2 1-1/8 – 14 Plug
23155x6 3/8
23155x8 1/2
PIPE
PART #
THREAD
23155x12 3/4
23129x2 1/8
23129
Pipe Cap 23129x4 1/4
FEMALE MALE
23129x6 3/8 PART #
PIPE PIPE
23129x8 1/2
23200 23201x2 1/8 1/8
23129x12 3/4
Adapter 23200x2 1/8 1/8
PIPE
23204x2 1/4 1/8
PART #
THREAD
23200x4 1/4 1/4
23150x2 1/8
23206x2 3/8 1/8
23150 23150x4 14
Slotted Head Plug 23150x6 38 23206x4 3/8 1/4
Page 70 www.allvalleyhose.com
Brass
Pipe Fittings
(877)778-HOSE Page 71
Brass
Pipe Fittings
PIPE PIPE
PART # PART #
THREAD THREAD
MALE FEMALE
PART #
PIPE PIPE
23500x2 1/8
23500 PIPE
23504x2 1/4x1/8 PART #
90° Female Pipe THREAD
Elbow 23500x4 1/4 23950x2 1/8
23500x6 3/8
23950
23950x4 1/4
Female Pipe Cross
23508x6 1/2x3/8 23950x6 3/8
23500x8 1/2 23950x8 1/2
23500x12 3/4 23950x12 3/4
Page 72 www.allvalleyhose.com
Brass
Pipe Fittings
(877)778-HOSE Page 73
Brass
Poly Tubing Fittings
TUBE TUBE
PART # PART #
OD OD
59PF 59PF-4 1/4 61PFB-2 1/8
Plastic Cap 61PFB 61PFB-3 3/16
59PF-5 5/16
Nut and Brass
59PF-6 3/8 61PFB-4 1/4
Sleeve
61PFB-5 5/16
59PF-8 1/2
61PFB-6 3/8
61PFB-8 1/2
TUBE
PART #
OD
TUBE
60PF 60PF-4 1/4 PART #
OD
Plastic Sleeve 60PF-5 5/16 62PF-2 1/8
62PF
60PF-6 3/8 Union 62PF-3 3/16
60PF-8 1/2 62PF-4 1/4
62PF-5 5/16
62PF-6 3/8
TUBE
PART # 62PF-6-4 3/8 x 1/4
OD
64PF-2 1/8
TUBE
64PF
PART #
OD Union Tee 64PF-3 3/16
64PF-4 1/4
61PF-4 1/4
61PF 64PF-5 5/16
61PF-5 5/16
Nut and 64PF-6-4 3/8 x 1/4
Plastic Sleeve 61PF-6 3/8 64PF-6 3/8
61PF-8 1/2 64PF-8 1/2
Page 74 www.allvalleyhose.com
Brass
Poly Tubing Fittings
(877)778-HOSE Page 75
Brass
Poly Tubing Fittings
TUBE TUBE
PART # PART #
OD OD
82PF 94PFD
82PF-4 1/4 94PFD-4-4 1/4
Bulkhead Union Double End
82PF-5 5/16 Shutoff Bulkhead 94PFD-6-6 3/8
82PF-6 3/8 Quick Coupler
82PF-8 1/2
TUBE PIPE
PART #
TUBE OD THREAD
PART #
OD
98PF 98PF-4-2 1/4 1/8
82PFC Quick Coupler
82PFC-4 1/4 98PF-4-4 1/4 1/4
Bulkhead Union Connector
Tube to 82PFC-6 3/8 98PF-6-4 3/8 1/4
Compression
TUBE PIPE
TUBE PIPE PART #
PART # OD THREAD
OD THREAD 98PFD
98PFD-4-2 1/4 1/8
91PF 91PF-4-2 1/4 1/8 Double End
Shutoff Quick 98PFD-4-4 1/4 1/4
Pipe Coupler 91PF-4-4 1/4 1/4
Coupler 98PFD-6-4 3/8 1/4
91PF-6-4 3/8 1/4
TUBE TUBE
PART # PART #
OD OD
92PF 92PF-4-4 1/4 31OPF-4-4 1/4
Bulkhead 31OPF
92PF-6-6 3/8
Needle Valve 31OPF-6-6 3/8
Tube to Tube
TUBE
PART #
OD
Page 76 www.allvalleyhose.com
Brass
Push Connects for Poly Tubing
TUBE TUBE
PART # PART #
OD OD
(877)778-HOSE Page 77
Brass
Push Connects for Poly Tubing
Page 78 www.allvalleyhose.com
Brass
Push Connects for Poly Tubing
TUBE PIPE
PART #
OD THREAD
(877)778-HOSE Page 79
Brass
Push Connect (DOT) Fittings
Meets requirements of FMVSS 106
Department of Transportation (DOT) approved for air brake use.
Page 80 www.allvalleyhose.com
Brass
Push Connect (DOT) Fittings
Meets requirements of FMVSS 106
Department of Transportation (DOT) approved for air brake use.
(877)778-HOSE Page 81
Brass
Push Connect (DOT) Fittings
Meets requirements of FMVSS 106
Department of Transportation (DOT) approved for air brake use.
TUBE MALE
PART #
SIZE PIPE
Page 82 www.allvalleyhose.com
Brass
SAE (45°) Flare Tube Fittings
TUBE
244x5x5x4 5/16 5/16 1/4
PART #
SIZE
244x6 3/8 3/8 3/8
241x2 1/8
241 241x3 3/16 244x6x6x4 3/8 3/8 1/4
Flare Nut (Long) 241x4 1/4 244x6x6x8 3/8 3/8 1/2
241x5 5/16
241x6 3/8 244x6x6x10 3/8 3/8 5/8
241x8 1/2
241x10 5/8 244x8 1/2 1/2 1/2
241x12 3/4 244x8x6x8 1/2 3/8 1/2
TUBE TUBE 244x8x8x4 1/2 1/2 1/4
PART #
SIZE SIZE
244x8x8x6 1/2 1/2 3/8
242 242x2 1/8 1/8
242x3 3/16 3/16 244x8x8x12 1/2 1/2 3/4
Double End Union 242x4 1/4 1/4
244x8 1/2 1/2 1/2
242x5x4 5/16 1/4
242x5 5/16 5/16 244x8x8x10 1/2 1/2 5/8
242x6x4 3/8 1/4
242x6x5 3/8 5/16 244x10x8x10 5/8 1/2 5/8
242x6 3/8 3/8 244x10x10x6 5/8 5/8 3/8
242x8x4 1/2 1/4
242x8x6 1/2 3/8 244x10x10x8 5/8 5/8 1/2
242x8 1/2 1/2
244x10 5/8 5/8 5/8
242x10x6 5/8 3/8
242x10x8 5/8 1/2 244x12 3/4 3/4 3/4
242x10 5/8 5/8
242x12x8 3/4 1/2 244x12x10x12 3/4 5/8 3/4
242x12x10 3/4 5/8 244x12x12x8 3/4 3/4 1/2
242x12 3/4 3/4
242x14 7/8 7/8 244x12x12x10 3/4 3/4 5/8
(877)778-HOSE Page 83
Brass
SAE (45°) Flare Tube Fittings
(877)778-HOSE Page 85
Brass
SAE (45°) Flare Tube Fittings
TUBE TUBE
PART # PART #
SIZE SIZE
258x4 1/4 2129x3 3/16
258x6 3/8 2129 2129x4 1/4
258 Seal Cap for
258x8 1/2 2129x5 5/16
90° Flare to External Flare End
258x10 5/8 2129x6 3/8
Flare Swivel
2129x8 1/2
2129x10 5/8
TUBE MALE 2129x12 3/4
PART #
SIZE PIPE
2311x3 3/16
TUBE 2311 2311x4 1/4
PART #
SIZE Seal Bonnet 2311x5 5/16
1950x4 1/4
2311x6 3/8
1950x6 3/8 2311x8 1/2
1950
1950x8 1/2 2311x10 5/8
External Flare
Cross 2311x12 3/4
Brass
SAE (45°) Flare Tube Fittings
TUBE TUBE
PART # PART #
SIZE SIZE
(877)778-HOSE Page 87
Flanges
HYDRAULIC FLANGES
HAF/HF62
Pipe
Threaded
4 Bolt
SAE
Flange
HF20
SAE
O-Ring
Thread
4 Bolt
SAE
Flange
Page 88 www.allvalleyhose.com
Flanges
BLANK FLANGES
Flanges have o-ring groove but have not been tapped or drilled.
BF61/BF62
4 Bolt
SAE
Flange
SPLIT FLANGES
Flange
SFH
Half
Split
Flange
(877)778-HOSE Page 89
Flanges
SOCKET WELDS
WF
WC
Flat Socket Weld
Companion
4 Bolt
For Pipe Tapped
Holes
FLANGE KIT FLANGE ONLY BOLTS/WASHERS
SIZE
PART # PART # PART #
CODE 61 – 3000 PSI
3/4 WC-61-12K WC-61-12 KWC-61-12
1 WC-61-16K WC-61-16 KWC-61-16
1-1/4 WC-61-20K WC-61-20 KWC-61-20
1-1/2 WC-61-24K WC-61-24 KWC-61-24
2 WC-61-32K WC-61-32 KWC-61-32
2-1/2 WC-61-40K WC-61-40 KWC-61-40
3 WC-61-48K WC-61-48 KWC-61-48
Page 90 www.allvalleyhose.com
Garden Hose
Couplings, Fittings, Adapters and Accessories
GHF ST - GHF
Female Garden Hose Shank w/ Female Garden Hose Shank
Swivel Nut and Washer with Swivel Nut and Washer –
FEMALE GARDEN HOSE Straight Thread Pipe and Nut
PART #
HOSE THREAD SIZE
STRAIGHT HOSE
1/4 GHF 3/4 x 11-1/2 1/4 PART #
FEMALE PIPE SIZE
3/8 GHF 3/4 x 11-1/2 3/8 3/8 ST GHF 3/4 x 14 3/8
1/2 GHF 3/4 x 11-1/2 1/2
5/8 GHF 3/4 x 11-1/2 5/8 1/2 ST GHF 3/4 x 14 1/2
3/4 GHF 3/4 x 11-1/2 3/4 5/8 ST GHF 3/4 x 14 5/8
1” GHF 1 1 3/4 ST GHF 3/4 x 14 3/4
GHF-12-16 1 3/4
ST-GHM
GHM Male Garden Hose Shank
Male Garden Hose Shank Straight Thread Pipe
MALE GARDEN HOSE STRAIGHT HOSE
PART # PART #
HOSE THREAD SIZE MALE PIPE SIZE
3/8 GHM 3/4 x 11-1/2 3/8 3/8 ST GHM 3/4 x 14 3/8
1/2 GHM 3/4 x 11-1/2 1/2 1/2 ST GHM 3/4 x 14 1/2
5/8 GHM 3/4 x 11-1/2 5/8 5/8 ST GHM 3/4 x 14 5/8
3/4 GHM 3/4 x 11-1/2 3/4 3/4 ST GHM 3/4 x 14 3/4
1” GHM 1 1
ST-GHFL
Long Shank Female Garden
GHFL Hose Coupling with Swivel
Long Shank Female Garden Nut and Washer– Straight
Hose Coupling (7 Barbs) Thread Pipe (7 Barbs)
BARB OVERALL BARB OVERALL HOSE
PART # LENGTH LENGTH HOSE SIZE PART #
LENGTH LENGTH SIZE
1/2 GHFL 2.03 2.72 1/2 1/2 ST GHFL 2.03 2.65 1/2
5/8 GHFL 2.03 2.72 5/8 5/8 ST GHFL 2.03 2.65 5/8
3/4 GHFL 2.03 2.72 3/4 3/4 ST GHFL 2.03 2.65 3/4
1” GHFL 2.03 2.72 1
1” ST GHFL 2.03 2.65 1
GHML ST-GHML
Long Shank Male Garden Long Shank Garden Hose
Hose Coupling (7 Barbs) Coupling – Straight
BARB OVERALL Thread Pipe (7 Barbs)
PART # HOSE SIZE
LENGTH LENGTH BARB OVERALL HOSE
PART #
1/2 GHML 2.03 2.72 1/2 LENGTH LENGTH SIZE
1/2 ST GHML 2.03 2.72 1/2
5/8 GHML 2.03 2.72 5/8
5/8 ST GHML 2.03 2.72 5/8
3/4 GHML 2.03 2.72 3/4 3/4 ST GHML 2.03 2.72 3/4
1” GHML 2.03 2.72 1 1” ST GHML 2.03 2.72 1
(877)778-HOSE Page 91
Garden Hose
Couplings, Fittings, Adapters and Accessories
21503 21510
Male Garden Hose with Male Garden Hose with
Internal Pipe Thread External Flare - SAE
MALE GARDEN
FEMALE TUBE
PART # GARDEN HOSE PART # HOSE
PIPE SIZE
THREAD THREAD
21503x12x4 3/4 x 11-1/2 1/4 21510x12x6 5/8-18 3/4 x 11-1/2
21503x12x6 3/4 x 11-1/2 3/8 21510x12x8 3/4-16 3/4 x 11-1/2
21503x12x8 3/4 x 11-1/2 1/2 21510x12x10 7/8-14 3/4 x 11-1/2
21503x12x12 3/4 x 11-1/2 3/4
21503x12x16 3/4 x 11-1/2 1
21503x16x16 1 X 11-1/2 1 21513
Garden Hose Swivel with
21505 External Flare – SAE
PART # TUBE SIZE
Female Garden Hose with
21513x12x6 3/8
External Pipe Thread
21513x12x8 1/2
FEMALE
MALE
PART # GARDEN HOSE
PIPE
THREAD
21505x12x8 3/4 x 11-1/2 1/2 21514
21505x12x12 3/4 x 11-1/2 3/4 Knurled Hose Nut
(Fits #21513)
GARDEN HOSE
PART #
21507 THREAD
Female Garden Hose with 21514x12 3/4 x 11-1/2
Internal Pipe Thread
FEMALE
PART # GARDEN HOSE
FEMALE 21515
PIPE Garden Hose Union
THREAD
21507x12x8 3/4 x 11-1/2 1/2 Non-Swivel
21507x12x12 3/4 x 11-1/2 3/4 FEMALE
PART # GARDEN HOSE
THREAD
21508 21515x12x12 3/4 x 11-1/2
Male Garden Hose with
Female Garden Hose
MALE FEMALE
PART # GARDEN HOSE GARDEN HOSE 21518
THREAD THREAD Hose Cap
21508x12x16 3/4 x 11-1/2 1 x 11-1/2 GARDEN HOSE
PART #
21508x16x12 1 x 11-1/2 3/4 x 11-1/2 THREAD
21518x12 3/4 x 11-1/2
21509
Hose Y
Zinc Die Casting 21519
FEMALE MALE Garden Hose Union Swivel
PART # GARDEN HOSE GARDEN HOSE GARDEN HOSE
PART #
THREAD THREAD THREAD
21509x12x12x12 3/4 x 11-1/2 3/4 x 11-1/2 21519x12x12 3/4 x 11-1/2
Page 92 www.allvalleyhose.com
Garden Hose
Couplings, Fittings, Adapters and Accessories
W 21520
Garden Hose Washer Swivel Female Garden Hose
- Neoprene to Male Pipe
PART # GARDEN HOSE SIZE FEMALE
MALE
W12 3/4 PART # GARDEN HOSE
PIPE
THREAD
W16 1
21520x12x4 3/4 x 11-1/2 1/4
WN12 (Nylon) 3/4
21520x12x6 3/4 x 11-1/2 3/8
21520x12x8 3/4 x 11-1/2 1/2
21520x16x12 1 3/4
21500
Garden Hose Union
MALE
PART #
GARDEN HOSE THREAD
21521
21500x12x12 3/4 x 11-1/2
Garden Hose Plug
MALE
PART #
GARDEN HOSE THREAD
21521x12x`12 3/4 x 11-1/2
21501/21502
Garden Hose Adapter
MALE MALE
PART #
PIPE THREAD
21501x12x6 3/8 3/4 x 11-1/2 21523
21501x12x8 1/2 3/4 x 11-1/2 Solid Brass Hose Shut-off
21502x12x12x8 3/4 3/4 x 11-1/2 GARDEN HOSE
PART #
21502x12x16 1 3/4 x 11-1/2 THREAD
21502x16x16 1 1 21523x12x12 3/4 x 11-1/2
21504
21524
Garden Hose Nut to Female
Solid Brass Hose Y
Pipe
with Shut-offs
PART # FEMALE PIPE
GARDEN HOSE
21504x12x2 1/8 PART #
THREAD
21524x12x12 3/4 x 11-1/2
21517
Internal Hose Swivel with
Internal Pipe Thread Adapter
FEMALE
21525
FEMALE Garden Hose Screen
PART # GARDEN HOSE
PIPE
THREAD GARDEN HOSE
21517x12x8 3/4 x 11-1/2 1/2 PART #
THREAD
21517x12x12 3/4 x 11-1/2 3/4 21525x12x12 3/4 x 11-1/2
(877)778-HOSE Page 93
Garden Hose
Couplings, Fittings, Adapters and Accessories
21526 21528
Female Garden Hose Live Live Swivel Female Pipe to
Swivel to Male Pipe Male Garden Hose
BRASS BRASS
FEMALE MALE
MALE PIPE FEMALE
PART # GARDEN HOSE PART # GARDEN HOSE
SWIVEL PIPE SWIVEL
SWIVEL SWIVEL
21526x12x12 3/4 x 11-1/2 3/4 21528x12x12 3/4 3/4 x 11-1/2
21527 21529
Female Garden Hose Live Live Swivel Female Pipe to
Swivel to Male Garden Hose Male Pipe
BRASS BRASS
FEMALE MALE FEMALE MALE
GARDEN HOSE GARDEN HOSE PART # PIPE PIPE
PART # SWIVEL SWIVEL SWIVEL SWIVEL
21527x12x12 3/4 x 11-1/2 3/4 x 11-1/2 21529x12x12 3/4 3/4
WCM/WCF
PS Quick Tite Coupler
Power Sweeper - BRASS - BRASS
FEMALE PART #
PART #
GARDEN HOSE THREAD
WCM-8 1/2” Male Pipe
PS-12 3/4 x 11-1/2
Use with WCF-12
Page 94 www.allvalleyhose.com
Grease Zerk
Fittings
PIPE INTERCHANGES PIPE INTERCHANGES
PART # PART #
THREAD ALEMITE LINCOLN THREAD ALEMITE LINCOLN
GZS-2 1/8 1610 5000 GZD-3 3/16 1728B 5033
GZS-4 1/4 1627 5050 GZD
GZS GZD-4 1/4 1743B 5029
FINE TAPERED THREAD
Drive
Grease Zerk GZS-428 1/4-28 1641 5010 STAINLESS STEEL
Fittings
Straight METRIC GZD-3SS 3/16 N/A N/A
Straight
GZS-6M 6MM 8601 5175
GZD-4SS 1/4
GZS-8M 8MM 8901 5178 N/A N/A
GZS-10M 10MM 9301 5181
PIPE
INTERCHANGES PART #
PIPE THREAD
PART #
THREAD ALEMITE LINCOLN
GZS-2SS 1/8
GZ45-2 1/8 1688 5200
FINE TAPERED THREAD GZS-SS GZS-4SS 1/4
GZ45 GZ45-428 1/4-28 1637 5210 Grease FINE TAPERED THREAD
Grease Zerk METRIC Zerk GZS-428SS 1/4-28
45° GZ45-6M 6MM 7045 5177 Straight
METRIC
GZ45-8M 8MM 7445 5179 Stainless GZS-6MSS 6MM
GZ45-10M 10MM 7845 5182 Steel
GZS-8MSS 8MM
PIPE INTERCHANGES
PART # GZS-10MSS 10MM
THREAD ALEMITE LINCOLN
GZ90-2 1/8 1613 5400
FINE TAPERED THREAD PIPE
PART #
GZ90 GZ90-428 1/4-28 1911 5410 THREAD
Grease Zerk METRIC GZ45-2SS 1/8
90° GZ90-6M 6MM 7090 5176
FINE TAPERED THREAD
GZ90-8M 8MM 7490 5180 GZS-SS GZ45-428SS 1/4-28
GZ90-10M 10MM 7890 5183 Grease
METRIC
Zerk
PIPE INTERCHANGES 45° GZ45-6MSS 6MM
PART #
THREAD ALEMITE LINCOLN
Stainless GZ45-8MSS 8MM
Steel GZ45-10MSS 10MM
GZ65-4 1/4 1629 5350
GZ65
Grease Zerk
PIPE
67.5° PART #
THREAD
(877)778-HOSE Page 95
Hose Barb Fittings
Brass, Stainless Steel and Bronze as Indicated
Page 96 www.allvalleyhose.com
Hose Barb Fittings
Brass, Stainless Steel and Bronze as Indicated
HOSE FEMALE
HOSE MALE PART #
PART # ID TUBE
ID PIPE
JS-3-3 3/16 3/16
SFB-3-3 3/16 3/16 JS JS-3-4 3/16 1/4
SFB SFB-3-4 3/16 1/4 Female JIC JS-4-4 1/4 1/4
Female SAE SFB-4-4 1/4 1/4
Swivel 37° Seat JS-4-5 1/4 5/16
Swivel 45° Seat SFB-4-5 1/4 5/16
SFB-4-6 1/4 3/8 BRASS JS-4-6 1/4 3/8
BRASS JS-5-5 5/16 5/16
SFB-5-5 5/16 5/16
SFB-5-6 5/16 3/8 JS-5-6 5/16 3/8
SFB-6-6 3/8 3/8 JS-6-6 3/8 3/8
SFB-6-8 3/8 1/2 JS-6-8 3/8 1/2
SFB-8-8 1/2 1/2 JS-8-8 1/2 1/2
SFB-8-10 1/2 5/8 JS-8-10 1/2 5/8
SFB-10-10* 5/8 5/8 JS-10-10* 5/8 5/8
SFB-10-12* 5/8 3/4 JS-12-12* 3/4 3/4
SFB-12-12* 3/4 3/4 JS-16-16* 1 1
* CRIMPED NUT * CRIMPED NUT
(877)778-HOSE Page 97
Hose Barb Fittings
Brass, Stainless Steel and Bronze as Indicated
HB HB-16-20 1 1-1/4
Hose Barb to HB-20-16 1-1/4 1
NPSM Male Pipe
PART #
THREAD
BRONZE HB-20-20 1-1/4 1-1/4
UM-2 1/8
UM HB-24-24 1-1/2 1-1/2
UM-4 1/4
Ball Seat Union HB-32-32 2 2
BRASS UM-6 3/8
UM-8 1/2
UM-12 3/4
UM-12 3/4
Page 98 www.allvalleyhose.com
Hose Barbs
Beaded End Hose Barb Fittings
(877)778-HOSE Page 99
Hose Barbs
Double Barb Fittings
TUBE TUBE
PART # PART #
OD OD
101x4 1/4 106x5/32 5/32
101 106
101x6 3/8 106x4 1/4
Plug 90° Union
101x8 1/2 106x6 3/8
Elbow
106x8 1/2
TUBE
PART #
OD
102 102x5/32 5/32 x 5/32 PART #
TUBE
OD
Union/ 102x4 1/4 x 1/4
Union Reducer 102x4x5/32 1/4 x 5/32 107x4 1/4
107
102x4x6 1/4 x 3/8 107x4x5/32 1/4 x 1/4 x 5/32
Union Tee/
102x4x8 1/4 x 1/2 107x5/32 5/32
Union Tee
102x6 3/8 x 3/8 Combination 107x6 3/8
102x6x8 3/8 x 1/2 Sizes 107x6x5/32 3/8 x 3/8 x 5/32
102x8 1/2 x 1/2 107x6x4 3/8 x 3/8 x 1/4
107x8 1/2
107x8x4 1/2 x 1/2 x 1/4
TUBE PIPE
PART #
OD THREAD 107x8x6 1/2 x 1/2 x 3/8
HOSE MALE
PART #
ID PIPE HOSE PIPE
PART #
ID THREAD
PMS-4-4 1/4 1/4
PMS PM90-4-2 1/4 1/8
PMS-6-4 3/8 1/4
Male Pipe Swivel
PMS-6-6 3/8 3/8 PM90 PM90-4-4 1/4 1/4
PMS-8-6 1/2 3/8 90° Male Pipe PM90-6-2 3/8 1/8
PMS-8-8 1/2 1/2 PM90-6-4 3/8 1/4
PMS-12-12 3/4 3/4
PM90-6-6 3/8 3/8
PM90-6-8 3/8 1/2
HOSE FEMALE
PART # PM90-8-6 1/2 3/8
ID PIPE
FP-4-2 1/4 1/8 PM90-8-8 1/2 1/2
FP FP-4-4 1/4 1/4 PM90-10-8 5/8 1/2
Female Pipe Solid FP-4-6 1/4 3/8 PM90-10-12 5/8 3/4
FP-5-4 5/16 1/4
PM90-12-12 3/4 3/4
FP-6-2 3/8 1/8
FP-6-4 3/8 1/4
FP-6-6 3/8 3/8 HOSE MALE
PART #
FP-6-8 3/8 1/2 ID SAE
FP-8-4 1/2 1/4 SM-4-4 1/4 1/4
FP-8-6 1/2 3/8 SM
Male SAE SM-4-5 1/4 5/16
FP-8-8 1/2 1/2
45° Seat SM-6-6 3/8 3/8
FP-10-8 5/8 1/2
FP-10-12 5/8 3/4 SM-8-8 1/2 1/2
FP-12-12 3/4 3/4 SM-10-10 5/16 5/16
HCD-861 PART #
HOSE
** WARNING ** Hose Crimper OD
These crimping tools are NOT intended for use Replacement For use with HCT 855 and 855A
with high pressure hose and fittings. Dies
HCD861-1 5/8"
HCD861-2 37/64"
PART # DESCRIPTION
HCD861-3 17/32"
Brass Ferrule
HCT-855
Crimping Tool HCD861-4 31/64"
For brass or aluminum ferrules HCD861-5 11/16"
only. Will not crimp steel fittings
or steel reinforced hose. HCD861-7 7/16"
Manually powered hose crimping
HCD861-8 3/4"
tool for hoses with an outer
diameter of .490” to .710”. HCD861-9 13/16"
Includes 5 dies (HCD856-1,
HCD856-2, HCD856-3, HCD856- HCD861-10 3/8"
4, HCD856-5). For use with HCT 860
Other dies available for hoses with HCD861-22 11/16”
an outer diameter of .385” to .843”.
HCD861-23 23/32”
PART # DESCRIPTION HCD861-24 3/4”
Brass Ferrule HCD861-25 25/32”
HCT-855A
Crimping Tool
HCD861-26 13/16”
For brass or aluminum ferrules
only. Will not crimp steel fittings HCD861-27 .27/32”
or steel reinforced hose.
HCD861-28 7/8”
Manually powered hose crimping
tool for hoses with an outer HCD861-29 29/32”
diameter of .447” to .671”.
HCD861-30 15/16”
Includes 5 dies (HCD856-1,
HCS856-2, HCD856-3, HCD856- HCD861-31 31/32”
4, HCD856-7)
HCD861-32 1”
Other dies available for hoses with
an outer diameter of .385” to .843”. HCD861-33 1-1/32”
HCD861-34 1-1/16”
PART # DESCRIPTION
HCD861-36 1-1/8”
Large Brass
HCT-860 Ferrule HCD861-38 1-3/16”
Crimping Tool
HCD861-40 1-1/4”
For brass or aluminum ferrules
only. Will not crimp steel fittings HCD861-42 1-5/16”
or steel reinforced hose.
HCD861-44 1-3/8”
Manually powered hose crimping
tool for hoses with an outer HCD861-46 1-7/16”
diameter of 11/16” to 1 1/2”.
Dies sold separately. HCD861-48 1-1/2”
2131x3 3/16
2131 2131x4 1/4 PART #
TUBE MALE
SIZE PIPE
Inverted Flare
Plug 2131x5 5/16 2400x2 1/8 1/8
2131x6 3/8 2400 2400x3 3/16 1/8
STEEL
90° Inverted 2400x4 1/4 1/8
Flare Tube 2432x4 1/4 1/4
Elbow 2400x5 5/16 1/8
TUBE
PART # 2434x5 5/16 1/4
SIZE
2400x6 3/8 1/4
2300 2300x2 1/8
2432x6 3/8 1/8
Inverted Flare 2300x3 3/16 2436x6 3/8 3/8
Double End Union 2300x4 1/4 2400x8 1/2 3/8
2300x5 5/16 2438x8 1/2 1/2
2400x8x4 1/2 1/4
2300x6 3/8
2400x10 5/8 1/2
2300x8 1/2 2400x12 3/4 1/2
TUBE MALE
PART #
SIZE PIPE
TUBE MALE
PART #
2600x3 3/16 1/8 SIZE PIPE
LEFT MALE
RIGHT PART # HAND
HOSE PIPE
PART # HAND THREAD
ID
THREAD WALH-9-2 9/16-18 1/8
WALH
WHRH WHRH-3-6 3/16 3/8-24
Welding Hose
Welding Hose WALH-9-4 9/16-18 1/4
WHRH-3-9 3/16 9/16-18 Adapter
Connector Left Hand Thread WALH-9-6 9/16-18 3/8
Right Hand Thread WHRH-4-9 1/4 9/16-18 BRASS
for Oxygen Line WALH-9-9 9/16-18 9/16-18
BRASS WHRH-5-9 5/16 9/16-18
BOLT HOLE
PART # DIAMETER
DIAMETER
PART BODY
B60P # SIZE
Rubber Plug
B60-2P 1/8
B60-4P 1/4
For use with
B60-6P 3/8
B60 Body
B60-8P 1/2
B60-12P 3/4
B60-16P 1
B60-24P 1-1/2
B60 B60-2-2 1/8 1/8 5000 FD45-1003-2-2 N/A 1H 11 H1-62 1-HF1 S105-1
Steel Body B60-4-4 1/4 1/4 5000 FD45-1003-4-4 16-263 2H 16 H2-62 2-HF2 S105-5
B60-6-6 3/8 3/8 4000 FD45-1003-6-6 16-363 3H 21 H3-62 3-HF3 S105-3
ISO “B” B60-8-8 1/2 1/2 4000 FD45-1003-8-8 16-463 4H 26 H4-62 4-HF4 S105-4
Coupler
B60-12-12 3/4 3/4 2500 FD45-1003-12-12 16-663 6H 31 H6-62 6-HF6 S105-6
B60-16-16 1 1 2000 FD45-1003-16-16 16-863 8H 36 H8-62 8-HF8 S105-8
B60-20-20 1-1/4 1-1/2 1000 N/A N/A 12H 41 H12-62L N/A N/A
B60-24-24 1-1/2 1-1/2 1000 N/A N/A 12H 46 H12-62N N/A N/A
B60B B60-2-2B 1/8 1/8 1000 FD45-1101-2-2 N/A B1H 11 BH1-60 1-HF1B BS105-1
Brass B60-4-4B 1/4 1/4 1000 FD45-1101-4-4 B16-263 B2H 16 BH2-60 2-HF2B BS105-2
Body B60-6-6B 3/8 3/8 1000 FD45-1101-6-6 B16-363 B3H 21 BH3-60 3-HF3B BS105-3
B60-8-8B 1/2 1/2 1000 FD45-1101-8-8 B16-463 B4H 26 BH4-60 4-HF4B BS105-4
ISO “B”
B60-12-12B 3/4 3/4 1000 FD45-1101-12-12 B16-663 B6H 31 BH6-60 6-HF6B BS105-6
Coupler
B60-16-16B 1 1 1000 FD45-1101-16-16 B16-863 B8H 36 BH8-60 8-HF8B BS105-8
PART BODY
# SIZE
P60C
Rubber Cap P60-4C 1/4
P60-6C 3/8
For use with
P60 Plug P60-8C 1/2
P60-12C 3/4
P60-16C 1
P60-24C 1-1/2
ISO “B” P60-12-12B 3/4 3/4 FD45-1086-12-12 B17-663 B6K 31 BH6-61 H6-F6B BS101-6
ISO “A” B66-6-6 3/8 3/8 4000 5601-6-6 56-300 6601-6-6 3KF3 S565-3
Coupler B66-8-8 1/2 1/2 4000 5601-8-10 56-400 6601-8-10 4KF4 S565-4
B40-16P 1 P40-16C 1
Ring
AG Series
Coupler
B30 B30-4 1/4 1/4 10,000 31-200 N/A N/A 3050-2 2T S35-2
High B30-6 3/8 3/8 10,000 31-300 CH-604 C38R 3050-3 3T S35-3
Pressure
Coupler
P30-4 1/4 1/4 10,000 31-200 N/A N/A 3010-2 2TF2 S31-2
P30
High P30-6 3/8 3/8 10,000 31-300 CR400 C38H 3010-3 3TF3 S31-3
Pressure
Plug
PART BODY
PART BODY
# SIZE
# SIZE
BODY END
PART #
B500HB SIZE SIZE
Quick Coupler Body B500x4x4HB 1/4 1/4 BODY END
PART #
Hose Barb B500x4x6HB 1/4 3/8 SIZE SIZE
P700F/P700M FEMALE
BODY END
Quick Coupler
PART # Plug P700x4x4F 1/4 1/4
B500PO SIZE SIZE
Quick Coupler Body Female or Male MALE
B500x4x4PO 1/4 1/4
Push-On Hose Barb Pipe Thread P700x4x4M 1/4 1/4
B500x4x6PO 1/4 3/8
UNIVERSAL COUPLER
BODY END
PART #
SIZE SIZE Compatible with
P500F/P500M Industrial/ARO/Automotive Plugs
FEMALE
Quick Coupler Plug P500x4x4F 1/4 1/4
Female (F) or
P500x4x6F 1/4 3/8
Male (M) Pipe
Thread MALE
P500x4x4M 1/4 1/4
BODY END
P500x4x6M 1/4 3/8 PART #
SIZE SIZE
B1250F FEMALE
PART #
BODY END B1250M
P500HB SIZE SIZE B1250x4x4F 1/4 1/4
Push to Connect
Quick Coupler Plug
P500x4x4HB 1/4 1/4 Design MALE
Hose Barb
Female or Male
Pipe Thread B1250x4x4M 1/4 1/4
BODY END
P500PO PART #
SIZE SIZE
Quick Coupler Plug 150 PSI
Push-On Hose Barb P500x4x4PO 1/4 1/4 Pressure Rating
BODY PIPE
PART #
SIZE THREAD
TLP -HB
Twist Plug TLP-4-4HB 1/4 1/4
Hose Barb TLP-4-6HB 1/4 3/8
FEMALE
PART #
PIPE
GV025 1/4
GV038 3/8
GV
Gate Valve GV050 1/2
GV075 3/4
W/O/G Pressure
150 PSI GV100 1
GV125 1-1/4
GV150 1-1/2
GV200 2
2015x2 1/8
2015 2015x4 1/4 PART #
PIPE
THREAD
Internal Seating
Drain Cock 2015x6 3/8 2301x2 1/8
2301 2301x4 1/4
Straightaway
PIPE Needle Valve with
PART #
THREAD
External Pipe
2019x2 1/8 Thread
2019
2019x4 1/4
Angle Drain Cock
PIPE
PART #
THREAD
PIPE
PART # 2304x2 1/8
THREAD
2304 2304x4 1/4
2038x2 1/8
Straightaway
2038 2038x4 1/4
Needle Valve with
Drain Cock 2038x6 3/8 Internal Pipe
Thread
PIPE
PART #
THREAD
PIPE
PART #
2201x3 3/16 THREAD
2201
2201x4 1/4 2305x2 1/8
Compression 2305
Straightaway 2201x5 5/16 Straightaway 2305x4 1/4
Needle Valve Needle Valve with
2201x6 3/8
External and
Internal Pipe
TUBE PIPE Thread
PART #
SIZE THREAD
TUBE PIPE
PART # PART # TUBE SIZE
SIZE THREAD
TUBE
PART # PIPE
SIZE PART #
THREAD
2501x6x6 3/8
2506x2 1/8
2501
2506 2506x4 1/4
Brass Shutoff
Ground Plug 2506x6 3/8
Cock (30 PSI)
Shutoff Cock (30
Flare to Flare
PSI) Male Pipe to
Male Pipe
PART # TUBE SIZE
FEMALE MALE
2502x4x4 1/4 PART #
PIPE PIPE
2502 2502x6x6 3/8 2507x2x2 1/8 1/8
Ground Plug 2502x8x8 1/2 2507 2507x4x4 1/4 1/4
Shutoff Cock (30 Ground Plug
PSI) Flare to Flare 2502x10x10 5/8 2507x6x6 3/8 3/8
Shutoff Cock (30
PSI) Female Pipe
TUBE PIPE to Male Pipe
PART #
SIZE THREAD
PIPE PIPE
PART # PART #
THREAD THREAD
2509x2 1/8
2509 2509x4 1/4
Drain Cock 2511 2511x4 1/4
(30 PSI) 2509x6 3/8 4 Way Valve
2509x8 1/2 (30 PSI)
PIPE
PIPE PART #
PART # THREAD
THREAD
2510x2 1/8
2523 2523x2 1/8
2510 2510x4 1/4
Air Vent
3 Way Valve 2510x6 3/8 (150 PSI)
(30 PSI)
TUBE PIPE
PART #
THREAD THREAD HOSE PIPE
PART #
ID THREAD
2513x8x6 1/2 3/8
2513 2518x10x8 5/8 1/2
2513x8x8 1/2 1/2
Truck Valve 2518
Flare to Male Pipe 2513x10x8 5/8 1/2 Truck Valve 2518x12x6 3/4 3/8
2513x12x8 3/4 1/2 Hose Barb to
2518x12x8 3/4 1/2
Male Pipe