Professional Documents
Culture Documents
www.huawei.com
Contents
1. System Overview 2. System Structure 3. Typical Configuration
Page1
E-UTRAN: Evolved UMTS Terrestrial Radio Access Network EPC: Evolved Packet Core network MME: Mobility Management Entity S-GW: Server Gateway
Page2
Future release
RFU RRU
BBU
Huawei Fourth Generation Base Station Three standardized modules shared by all eNodeB portfolio
Copyright 2011 Huawei Technologies Co., Ltd. All rights reserved. Page 3
eNodeB Modules
CPRI
RF Unit RFU/RRU
Cabinet
Page4
Capacity Specification
Item
Maximum number of cells (DBS3900) Maximum throughput per cell (20 MHz) Maximum throughput per eNodeB
4
Specification
x 2 MIMO: 6 cells (1.4 MHz/3 MHz/5 MHz/10 MHz/15 MHz/20 MHz) 2 x 2 MIMO: 12 cells (1.4 MHz/3 MHz/5 MHz/10 MHz/15 MHz/20 MHz)
Downlink
rate at the Media Access Control (MAC) layer: 150 Mbit/s Uplink rate at the MAC layer: 70 Mbit/s
Downlink:
Maximum number of UEs in One LBBP configured (bandwidth of 1.4 MHz): 1008 RRC_CONNECTED mode in One LBBP configured (bandwidth of 3 MHz/5 MHz/10 MHz/15 MHz/20 an eNodeB MHz): 1800 More than one LBBP configured (bandwidth of 1.4 MHz): 3024 More than one LBBP configured (bandwidth of 3 MHz/5 MHz/10 MHz/15 MHz/20 MHz): 5400 Maximum number of concurrent Data Radio Bearers (DRBs) per UE 8
Page5
Contents
1. System Overview 2. System Structure 3. Auxiliary Devices 4. Typical Configuration
Page6
Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction 2.2 RF Unit(RFU, RRU) Introduction
Page7
BBU3900
Dimensions: 86mm x 442mm x 310mm (H x W x D) Power consumption: 132 W (3 x 10 MHz) ~300 W (3 x 20 MHz) Weight: 12 kg
Page8
Page9
Performs configuration management, equipment management, performance monitoring, signaling processing, and radio resource management
Controls all boards in the system Provides the system clock and transmission ports
Page10
Processes uplink and downlink baseband signals Provides CPRI ports for communication between BBU3900 and RRUs
Page11
Specification of LBBP
Board
LBBPc 3 6 3 1
Number of Cell
Bandwidth of Cell
15M/20M 5M/10M 5M/10M 15M/20M
ANT Configuration
2T2R 2T2R 4T4R 4T4R
Page12
Functions:
Converts -48 V DC or +24 V DC power into +12 V DC power Provides ports for transmission of two RS485 signals and eight dry contact signals
Page13
GPS Clock
If an eNodeB is synchronized with the GPS clock, the eNodeB obtains clock synchronization signals from the GPS through the USCU. In this case, both frequency synchronization and time synchronization are applicable
IEEE1588 V2 Clock
IEEE1588 defines the Precision Time Protocol (PTP), which targets precise synchronization of distributed and independent clocks in measurement and control systems, with the precision to microseconds. IEEE1588 V2 supports frequency synchronization and time synchronization
In LTE applications, high-accuracy frequency synchronization and time synchronization can be achieved between clock servers and eNodeBs by IEEE1588 V2 synchronization
Page14
Clock over IP
Clock over IP is a Huawei proprietary frequency synchronization technology, which is based on an IP clock server/client architecture. It supports only frequency synchronization
Free Running
The clock enters the free running mode if no reference clock is available after the oscillator is warmed up or if the clock has lost its reference input for a period of time longer than the timer of the holdover mode
Page15
Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction 2.2 RF Unit(RFU, RRU) Introduction
Page16
RF Unit Category
There are two kinds of RF units in LTE BTS, RFU and RRU The RFU is type of radio frequency unit adopted in BTS3900, BTS3900A, BTS3900L
Page17
G/U/L
eRAN version
eRAN1.0/2.0 eRAN2.1 eRAN2.0 eRAN2.0 eRAN2.1 eRAN2.0 eRAN2.0 eRAN2.0
RRU3201 RRU3221 RRU RRU3908 RRU3220 RRU3222 LRFU RFU mRFU LRFU
L L GL/UL/GU L L L GL L
Page18
LRFU
LTE Radio Frequency Units (LRFUs) work in Frequency Division Duplex (FDD) mode
The LRFU processes uplink and downlink services and controls and monitors internal boards or modules.
Page19
MRFU
One Multi-Mode Radio Frequency Unit (MRFU) supports a maximum of six carriers, which support GSM/UMTS/LTE
The MRFU processes uplink and downlink services and controls and monitors internal boards or modules.
Page20
Specifications of RRU3221
Item Frequency Band/ Bandwidth (FDD) Dimensions (H x W x D) Weight Maximum output power Power consumption Frequency band 2.6 GHz (Band 7) RX band (MHz) 2500 to 2570 Specification TX band (MHz) 2620 to 2690 Supported bandwidth (MHz) 5, 10, 15, or 20
485 mm (19.09 in.) x 300 mm (11.22 in.) x 170 mm (6.7 in.) (23.5 L, with a housing) Not greater than 19 kg (41.9 lb) (with a housing) 2 40 W 370 W (2X40 100% Load)
Page21
RET Modes
STMA Mode
Page22
Contents
1. System Overview 2. System Structure 3. Typical Configuration
Page23
Numbers of LBBP
Numbers of Antennas
3 x 15 MHz/20 MHz, 2T2R 6 x 5 MHz/10 MHz, 2T2R 3 x 5 MHz/10 MHz, 4T4R 1 x 15 MHz/20 MHz, 4T4R
3 (dual-polarized antennas) 6 (dual-polarized antennas) 3 (antennas with four ports) 1 (antennas with four ports)
LBBPc:1
Page24
Network Topologies
Page25
Page26
Page27
Page28
Page29
Thank you
www.huawei.com