You are on page 1of 476

New Zealand Standards Catalogue

March 2009

Contents

Standards in numerical order 2


Index 415

Additions and changes, such as new amendments and Standards, revisions and withdrawals,
are given each month in the Standards Update magazine, available for free download from
http://www.standards.co.nz/news/Standards+Update.htm.

Standards New Zealand


Radio New Zealand House
155 The Terrace
NZ-Wellington 6001
Postal address:
Private Bag 2439
NZ-Wellington 6020

Tel. +64 4 498 59 90


Fax +64 4 498 59 94
E-mail enquiries@standards.co.nz
Web www.standards.co.nz
SAA/SNZ HB1:1994 Technical drawing for students
Provides a guide to drawing practice primarily for students and educators. An abridgement of NZS/AS 1100.101 with additional
material from NZS/AS 1100.201 and NZS/AS 1101.3.
Joint Australian/New Zealand Handbook
$39.95+GST (Members), $49.94+GST (Retail), 78 pages

SAA/SNZ Rul ES/1:1996 (Withdrawn)

SAA/SNZ HB3:1996 Electrical and electronic drawing practice for students


Sets out basic principles of electrical and electronic drawing, and general drawing practice. Intended for students and educators of
drawing in the electrotechnical fields. The handbook contains extracts from AS 1103, AS 1100.101 and AS 1102 as well as original
material. Provided are guidelines for setting out various types of electrical drawings, basic drawing principles such as lettering, line
types and orthographic projections, selections of graphical and letter symbols, and example diagrams and exercises.
Joint Australian/New Zealand Handbook
$49.95+GST (Members), $62.44+GST (Retail), 188 pages

NZMP 9:1989 (Withdrawn)

PAS 10:2001 Publicly available specification - Aviation high visibility safety garments
This Publicly Available Specification ("PAS") specifies the visual requirements for high visibility safety garments to be worn by people
engaged in work on or visiting an airport apron in situations where they may be exposed to hazard from moving traffic or from
moving plant or equipment in the charge of an operator. Covers garments suitable for day/night-time wear. It was commissioned by
the Australasian Aviation Ground Safety Council to run parallel with AS/NZS 4602:1999 and prepared by Technical Committee
P5859: Aviation High Visibility Safety Garments with Australian and New Zealand representation. This PAS is intended for use in
both Australia and New Zealand.
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS CISPR 11:2004 (2nd Edition) Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic
disturbance characteristics - Limits and methods of measurement
Adopts IEC CISPR 11:2004 which identifies limits and methods of measurement of electromagnetic disturbance characteristics in
ISM radio frequency equipment.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

NZSR 11:1965 (Withdrawn)

AS/NZS CISPR 12:2006 Vehicles, boats, and internal combustion engine driven devices - Radio disturbance
characteristics - Limits and methods of measurement for the protection of receivers except
those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
Provides limits of protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential
environment. Identical to and reproduced from CISPR 12:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages

NZSR 12:1965 (Withdrawn)

AS/NZS CISPR 13:2004 Sound and television broadcast receivers and associated equipment - Radio disturbance
characteristics - Limits and methods of measurement
Specifies the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar
transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. Identical to and
reproduced from CISPR 13:2003.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages
NZSR 13:1966 (Withdrawn)

AS/NZS CISPR 14:- Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus

14.1:2003 Emission
Establishes uniform requirements for the conduction and the radiation of radio-frequency disturbances from appliances whose main
functions are performed by motors and switching or regulating devices, unless the radio frequency energy is intentionally generated
or intended for illumination. Identical with and reproduced from CISPR 14-1:2002.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 62 pages

14.2:2003 Immunity - Product family standard


Provides manufacturers, designers and suppliers of household appliances, electric tools and similar apparatus with limits and
methods of measurement with regard to their immunity characteristics to interfering signals. Identical with and reproduced from
CISPR 14-2:2001.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 15 pages

AS/NZS CISPR 15:2006 Limits and methods of measurement of radio disturbance characteristics of electrical
lighting and similar equipment
Specifies the limits and methods of test for the measurement of radio disturbance characteristics of electrical lighting and similar
equipment. The frequency range covered is 9 kHz to 400 GHz. Identical to and reproduced from CISPR 15:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

NZSR 15:1965 (Withdrawn)

NZS/SMACNA 15d:1985 (Withdrawn)

AS/NZS CISPR 16:- Specification for radio disturbance and immunity measuring apparatus and methods

16.1:- Radio disturbance and immunity measuring apparatus

16.1.1:2006 Measuring apparatus


Specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in
the frequency range 9 kHz to 18 GHz. Identical to and reproduced from CISPR 16-1-1:2005, including Amendment 1.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

16.1.2:2004 (2nd Edition) Ancillary equipment - Conducted disturbances


Adopts CISPR 16-1-2:2004, Ed 1.1 which specifies the characteristics and performance of equipment for the measurement of radio
disturbance voltages and currents in the frequency range 9 kHz to 1 GHz.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 76 pages

16.1.3:2004 (2nd Edition) Disturbance power


Adopts CISPR 16-1-3 Ed. 2.0 E (2004) which specifies the characteristics and calibration of the absorbing clamp for the
measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 28 pages

16.1.4:2004 (2nd Edition) Ancillary equipment - Radiated disturbances


Adopts CISPR 16-1-4:2004 which provides the characteristics and performance of equipment for the measurement of radiated
disturbances in the frequency range 9 kHz to 18 GHz.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 76 pages

16.1.5:2004 Antenna calibration test sites for 30 MHz to 1000 MHz


Specifies the requirements for calibration test sites, used to perform antenna calibrations, as well as the test antenna characteristics,
calibration site verification procedure and site compliance criteria. Identical to and reproduced from CISPR 16-1-5:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

16.2:- Methods of measurement of disturbances and immunity

16.2.1:2006 Conducted disturbance measurements


Specifies the methods of measurement of disturbance phenomena in general in the frequency range 9 kHz to 18 GHz and especially
of conducted disturbance phenomena in the frequency range 9 kHz to 30 MHz. Identical to and reproduced from CISPR 16-2-
1:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages

16.2.2:2006 Measurement of disturbance power


Provides the methods of measurement of disturbance power using the absorbing clamp in the frequency range 30 MHz to 1 000
MHz. Identical to and reproduced from CISPR 16-2-2:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

16.2.3:2004 Radiated disturbance measurements


Specifies the methods of measurement of radiated disturbance phenomena in the frequency range 9 kHz to 18 GHz. Identical to
and reproduced from CISPR 16-2-3:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 58 pages

16.2.4:2004 Immunity measurements


Specifies the methods of measurement of immunity to EMC phenomena in the frequency range 9 kHz to 18 GHz. Identical to and
reproduced from CISPR 16-2-4:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 18 pages

16.3:2004 CISPR technical reports


Provides technical reports and information on the history of CISPR. Identical to and reproduced from CISPR 16.3:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 186 pages

16.4:- Uncertainties, statistics and limit modelling

16.4.1:2006 Uncertainties in standardised EMC tests


Specifies guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR
electromagnetic compatibility (EMC) standards. Identical to and reproduced from CISPR 16-4-1:2005.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 84 pages

16.4.2:2004 Uncertainty in EMC measurements


Specifies the manner in which measurement uncertainty is to be taken in to account in determining compliance with CISPR limits.
An adoption with modifications of CISPR 16-4-2:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 17 pages

16.4.3:2004 (2nd Edition) Statistical considerations in the determination of EMC compliance of mass-produced
products
Adopts CISPR 16-4-3, Ed.2 (2004) which specifies recommendations on statistics of disturbance complaints, on the significance of
CISPR limits, and specific reports.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 36 pages

16.4.4:2004 Statistics of complaints and a model for the calculation of limits


Specifies the calculation of limits for disturbance field strength and disturbance voltage for the measurement on the test site on the
basis of models for the generation of disturbance for radiation coupling respectively for mains coupling. Identical to and reproduced
from CISPR 16-4-4:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
NZS/ISO 16:1975 Acoustics. Standard tuning frequency (standard musical pitch)
Specifies the standard tuning frequency (or standard musical pitch).
Adopted Standard
$66.66+GST (Members), $83.33+GST (Retail), 1 page

SAA/SNZ HB18:- Guidelines for third-party certification and accreditation

HB 18.2:2003 Standardization and related activities - General vocabulary


Specifies general terms and definitions concerning standardization and related activities. It is identical with and reproduced from
ISO/IEC Guide 2:1996.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 35 pages

HB18.7:1994 Guide 7 Guidelines for drafting of Standards suitable for use for conformity assessment
Identical to ISO/IEC Guide 7:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

HB18.16:1991 Guide 16 Code of principles on third-party certification systems and related standards
Identical to ISO/IEC Guide 16:1978.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 2 pages

HB18.22:2003 Part 22: General criteria for supplier's declaration of conformity


Specifies general criteria for a supplier's declaration of conformity in cases where it is desirable, or necessary, that conformity of a
product, process or service to normative documents be indicated, irrespective of the sector involved. The supplier may then declare
under his/her responsibility the conformity to normative documents. Identical with and reproduced from ISO/IEC Guide 22:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

HB18.23:1991 Guide 23 Methods of indicating conformity with standards for third-party certification
systems
Identical to ISO/IEC Guide 23:1982.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

HB18.25:1991 (Superseded by NZS ISO/IEC 17025:1999)

HB18.27:1991 Guide 27 Guidelines for corrective action to be taken by a certification body in the event of
either misapplication of its mark of conformity
Identical to ISO/IEC Guide 27:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

HB18.28:1991 Guide 28 General rules for a model third-party certification system for products
Identical to ISO/IEC Guide 28:1982.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

HB18.39:1991 (Superseded by AS/NZS 17020:2000)

HB18.40:1991 (Superseded by SAA/SNZ HB18.65:1998)

HB18.42:1991 Guide 42 Guidelines for a step-by-step approach to an international certification system


Identical to ISO/IEC Guide 42:1984.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

HB18.43:- Guide 43 Proficiency testing by interlaboratory comparisons


HB18.43.1:1998 Part 1: Development and operation of proficiency testing schemes
Defines those principles that need to be considered when organizing interlaboratory comparisons and describes the factors that
should be taken into account in the organization and conduct or proficiency testing schemes. Identical with and reproduced from
ISO/IEC Guide 43-1:1997.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

HB18.43.2:1998 Part 2: Selection and use of proficiency testing schemes by laboratory accreditation
bodies
Describes how laboratory accreditation bodies who assess technical competence of laboratories should select and use proficiency
testing schemes. Provides a harmonized model for selection and use of such schemes. Identical with and reproduced from ISO/IEC
Guide 43-2:1997.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

HB18.44:1991 Guide 44 General rules for ISO or IEC international third-party certification schemes for
products
Identical to ISO/IEC Guide 44:1985.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

HB18.48:1991 (Superseded by SAA/SNZ HB18.62:1996)

HB18.53:1991 Guide 53 An approach to the utilisation of a supplier`s quality system in third-party product
certification
Identical to ISO/IEC Guide 53:1988.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

HB18.54:1991 (Superseded by SAA/SNZ HB 18.58)

HB18.55:1991 Guide 55 Testing laboratory accreditation systems - General recommendations for


operation
Identical to ISO/IEC Guide 55:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

HB18.56:1991 Guide 56 An approach to the review by a certification body of its own internal quality
system
Identical to ISO/IEC Guide 56:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

HB18.57:1992 (Superseded by AS/NZS 17020:2000)

HB18.58:1993 Guide 58 Calibration and testing laboratory accreditation systems - General requirements
for operation and recognition
Sets out the general requirements for the operation of a system for accreditation of calibration and/or testing laboratories so that the
accreditations granted and the services covered by the accreditations may be recognized at national or international level as
competent and reliable. Identical to ISO/IEC Guide 58:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

HB18.60:1995 Guide 60 Code of good practice for conformity assessment


Identical to ISO/IEC Guide 60:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

HB18.61:1996 Guide 61 General requirements for assessment and accreditation of


certification/registration bodies
Provides general requirements for bodies operating accreditation systems; intended to promote equivalence of national systems and
facilitate mutual recognition between such bodies which are concerned with the recognition of competence. Identical to ISO/IEC
Guide 61:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

HB18.62:1996 Guide 62 General requirements for bodies operating assessment and


certification/registration of quality systems
Provides requirements which, if observed, are intended to ensure that certification bodies operate third-party certification/registration
systems in a consistent and reliable manner, thereby facilitating their acceptance on a national and international basis. Identical to
ISO/IEC Guide 62:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

HB18.65:1998 Guide 65 General requirements for bodies operating product certification systems
Provides general requirements for bodies operating a system for third-party product certification (which may include a process or
service) as a means of assurance that the system complies with specified Standards and other normative documents. This
Handbook is identical with and has been reproduced from ISO/IEC Guide 65.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS CISPR 20:2006 Sound and television broadcast receivers and associated equipment - Immunity
characteristics - Limits and methods of measurement
Provides methods of measurement and specified limits applicable to sound and television receivers and to associated equipment
with regard to their immunity characteristics to disturbing signals. Identical to and reproduced from CISPR 20:2005.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 92 pages

NZS/BS 21:1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads
(metric dimensions)
Specifies a range of pipe threads from 1/16 to 6 for pressure-tight joints together with thread forms, dimensions and tolerances, and
designations. Includes appendices for recommended gauging systems and methods of use of gauges. Requirements are given for
jointing threads for taper external threads, taper or parallel internal threads and for long-screw threads for long-screws specified in
BS 1387.
Reprinted incorporating Amendment 6633
Cited in BIA Approved Documents G10/AS1 and G14/VM1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 16 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS CISPR 22:2006 Information technology equipment - Radio disturbance characteristics - Limits and
methods of measurement
Specifies uniform requirements for the radio disturbance level of the equipment contained in the scope, to fix limits of disturbance, to
describe methods of measurement and to standardise operating conditions and interpretation of results. Identical to and reproduced
from CISPR 22:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 84 pages

AS/NZS CISPR 24:2002 Information technology equipment - Immunity characteristics - Limits and methods of
measurement
Establishes the uniform requirements for the electromagnetic immunity of information technology equipment and specifies applicable
tests, test levels, product operating conditions and assessment criteria. This Standard is identical to and has been reproduced from
CISPR 24:1997.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 29 pages

AS/NZS CISPR 25:2004 Radio disturbance characteristics for the protection of receivers used on board vehicles,
boats, and on devices - Limits and methods of measurement
Adopts CISPR 25 which develops limits and methods of measurement regarding radio disturbance characteristics, for the protection
of receivers used on board vehicles, boats, and on devices. Identical to and reproduced from CISPR 25:2002.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 64 pages

MP 25:2002 Basic guide to microfilming


This publication provides guidance on operating techniques, error detection and correction, and operator maintenance of equipment
for microfilming. Some explanatory material has been included to assist the operator's understanding of the basic theory behind the
laid-down procedures; however, this publication does not purport to deal exhaustively with micrographic technology. A table listing
some frequently encountered defects and their causes is shown in Appendix A.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

NZS/ANSI Z26-1:1990 (Withdrawn)

SAA/SNZ HB27:1996 Handbook for field testing of balanced cable installations


Provides guidance for testing (in the field) of four-pair 100 ohm balanced cabling links and channels, using unshielded or shielded
cable. Annexes cover accuracy requirements, test instruments, test procedures, reference tests, administration and practical
guidelines. The testing described generally satisfies basic acceptance test requirements and the transmission characteristics
requirements for trouble-shooting. It is based on ANSI/TIA/EIA TSB-67, but modified to align with terminology, tested parameters,
and performance specifications in ISO/IEC 11801 (incorporated in AS/NZS 3080).
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 37 pages

NZSR 27:1966 (Withdrawn)

NZCP 28:1962 (Withdrawn)

SAA/SNZ HB32:1995 Control of microbial growth in air-handling and water systems of buildings
Provides guidance for microbial control of both air-handling and water systems of buildings. The handbook is intended to provide
users with additional information to support the specific requirements of AS/NZS 3666 Parts 1 and 2:1995.
Joint Australian/New Zealand Handbook
$39.95+GST (Members), $49.94+GST (Retail), 47 pages

NZS/ANSI/ASHRAE 34:1992 (Superseded by AS/NZS 1668.1 & .2:1998)

NZS/IEC 38:1983 IEC standard voltages


Applies to: alternating current transmission, distribution and utilization systems and equipment with standard frequencies 50 and 60
Hz and a nominal voltage above 100 V; alternating current and direct current traction systems; alternating current and direct current
equipment with nominal voltages below 120 V alternating current or below 750 V direct current.
Adopted Standard
$87.72+GST (Members), $109.65+GST (Retail), 19 pages

NZCP 43:1962 (Withdrawn)

SAA/SNZ SP 043:1996 RCM logo kit


Logo artwork plus a 3.5" diskette. Provides equipment manufacturers with both a hard copy and a soft copy of the artwork for the
regulatory compliance mark (RCM) described in AS/NZS 4417.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail)

SNZ HB 44:2001 Subdivision for people and the environment


This handbook provides guidelines for alternative design in land development and subdivision in New Zealand and is based on the
design components used in eco-villages and co-housing developments. It aims to encourage creativity in the design process.
$169.95+GST (Members), $212.44+GST (Retail), 184 pages
NZCP 47:1961 (Withdrawn)

NZCP 48:1963 (Withdrawn)

IEC 50: (Withdrawn)

SAA/SNZ HB51:1993 (Withdrawn)

SAA/SNZ HB55:- ANZ GOSIP Version 3-1993 Government Open Systems Interconnection Profile

HB55.4:1993 ANZ Overview


Provides an introduction to the Australian/New Zealand Government OSI Profile (GOSIP) Version 3. Includes information relating to
the objectives and structure of GOSIP as well as the GOSIP policy and the relationship between ANZ GOSIP 3 and other OSI
profiles.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 42 pages

HB55.5:1993 ANZ Implementation Planning Guidelines


Covers the business and technical issues relating to the implementation of GOSIP within existing non-OSI networks.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 56 pages

HB55.5, Supplement 1:1994 ANZ Implementation Planning Guidelines - SNA based networks
Describes the replacements, additions and evolutions that could be implemented in an operational network, in a way that moves
from an initial Systems Network Architecture network to one that is increasingly GOSIP compliant. Provides the text of Section 4 of
SAA/SNZ HB55.5:1993.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 60 pages

HB55.6:1993 ANZ Naming and Addressing Guidelines


Provides guidance on the allocation of names and addresses within GOSIP networks. The types covered include subnetwork
addresses, network service access point addresses, application names, originator/recipient addresses, directory distinguished
names, EDIFACT interchange sender/recipient names, and object identifiers.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 122 pages

HB55.8:1995 Network Management Guidelines


Provides guidance to information technology planners and network managers implementing new networks in the areas of general
network management for data networks including OSI and SNMP, and presents overviews of the role of systems management as it
relates to network management with respect to emerging standards and architectures.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 78 pages

HB55.9:1995 Security Guidelines


Provides guidance on issues of security policy, system security, OSI security, existing network security, GOSIP security and
planning.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 54 pages

NZS/ANSI/ITSDF B56.1:2005 Safety standard for low lift and high lift trucks
Identical New Zealand adoption of an ANSI/ITSDF document defining the safety requirements relating to the elements of design,
operation and maintenance of low lift and high lift powered industrial trucks controlled by a riding or walking operator, and intended
for use on compacted, improved surfaces.
Adopted Standard
$29.95+GST (Members), $37.44+GST (Retail), 76 pages

NZS/ANSI/ASME B56.5 1993 (Withdrawn)

NZS/ANSI/ASME B56.6 1992 Safety standard for rough terrain forklift trucks
Defines safety requirements relating to the elements of design, operation and maintenance of rough terrain forklift trucks. These
trucks are intended for operation on unimproved natural terrain as well as the disturbed terrain of construction sites. Does not pertain
to vehicles intended primarily for earth moving unless they have been modified by the addition of a mast or boom for the purpose of
using forks.
Adopted Standard
$191.82+GST (Members), $239.78+GST (Retail), 36 pages

SAA/SNZ HB58:1994 (Superseded by SAA/SNZ HB90.0:2000)

SNZ/SAA MP62:1992 OSI - Vocabulary


Defines the terms used in the OSI environment. Definitions have been culled from a number of ISO Standards in the OSI area
covering all layers of the basic reference model.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 54 pages

SAA/SNZ HB62: (Withdrawn)

SAA/SNZ HB66(Int):2000 (Superseded by SAA/SNZ HB90.0:2000)

SAA/SNZ HB68:1995 Information technology - Open Systems Interconnection - Tutorial on naming and
addressing
Provides the main concepts and mechanisms to fulfill the needs for naming and addressing objects in the open systems
interconnection environment. Identical with and has been reproduced from ISO/IEC TR 10730:1993.
Joint Australian/New Zealand Handbook
$44.95+GST (Members), $56.19+GST (Retail), 35 pages

IEC 68: (Withdrawn)

SAA/SNZ MP72: (Withdrawn)

NZS 73:1962 (Withdrawn)

SAA/SNZ MP73:1997 UN/LOCODE, Code for ports and other locations


Specifies a series of internationally agreed port and location codes for use where coded representation is required for the names of
ports, airports, inland clearance depots and freight terminals and other locations used for goods movements associated with
international trade. This code list has particular relevance in information exchange between participants in such trade and to users of
the United Nations Electronic Data Interchange Standard, UN/EDIFACT. It is supplied electronically on a 90mm (3.5 inch) diskette.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail)

SAA/SNZ HB74:1996 X.400 Security implementation guide


Provides a guide to security to users of EDI messaging using X.400 protocols.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 22 pages

SAA/SNZ MP74:1996 Strategies for the development of Standards for digital video and associated services
Provides an overview of the standards environment in Australia and New Zealand, as it applies to digital television and related digital
broadband and interactive services and provides recommendations for future Standards development strategies, to ensure adequate
flexibility, openness and freedom of choice for consumers in the uptake of digital services.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 125 pages

SAA/SNZ HB75:1996 Teleconferencing Handbook


Describes the concepts and principles of teleconferencing. It also provides an introduction to the technology involved in
teleconferencing, the equipment used and the procedures for setting up a teleconference. It will provide users and potential users of
teleconferencing with an understanding of teleconferencing in order to encourage and facilitate its further adoption in Australia and
New Zealand.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 18 pages

SNZ HB 76:2008 Dangerous goods - Initial emergency response guide


This Handbook provides emergency response information for dealing safely with accidents, spills, leaks or fires in which dangerous
goods are involved. Information on hazards, protective clothing and emergency procedures is given. It can be used for the transport
and storage of all types of dangerous goods. The Handbook was revised in 2008 to keep it aligned with changes made to NZS
5433:2007. Those changes were carried out to accommodate the revised Land Transport Rule, the UNRTDG latest update, a review
in line with latest practices and technologies, and an update to the Classification section. Other information sources drawn on for the
development of this Handbook have also been updated and that material has been addressed in the 2008 version.
$49.95+GST (Members), $62.44+GST (Retail), 278 pages

SAA/SNZ MP76:1997 Pressure equipment - Inspection bodies and personnel


Sets out the requirements for inspection bodies and personnel who undertake design verification, fabrication inspection and in-
service inspection of pressure equipment described within the scope of AS/NZS 1200 and its referenced Standards. It also
describes the mechanisms to accredit bodies and to certify personnel.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 23 pages

SNZ HB 77:2008 Guide for the packing and transport of dangerous goods in transport units
This Handbook deals with sending dangerous goods in transport units for carriage by land and sea throughout New Zealand. It
concentrates on dangerous goods in packages, including small packages, dangerous goods in limited quantities, consumer
commodities and intermediate bulk containers (IBCs). The Handbook was revised in 2008 to keep it aligned with changes made to
NZS 5433:2007. Those changes were carried out to accommodate the revised Land Transport Rule, the UNRTDG latest update, a
review in line with latest practices and technologies, and an update to the Classification section. Other information sources drawn on
for the development of this Handbook have also been updated and that material has been addressed in the 2008 version.
$34.95+GST (Members), $43.69+GST (Retail), 43 pages

SAA/SNZ MP77:1999 (Withdrawn)

SAA/SNZ HB78:1998 (Superseded by SAA/SNZ HB90.0:2000)

SAA/SNZ HB80:1996 Benchmarking explained - A guide for undertaking and implementing benchmarking
This Handbook provides a basic introduction to benchmarking. It explains the basic concepts, describes the different types of
benchmarking and briefly discusses benchmarking techniques. The reasons for benchmarking are also discussed, as well as some
indication on how to use the results.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

IEC 81:1984 (Withdrawn)

SAA/SNZ HB84:1996 Guide to concrete repair and protection


Provides guidelines on inspection techniques, protective and remedial systems and repair practice for concrete in structures. Also
provides an overview of causes of concrete deterioration and the formation and types of cracks in concrete.
Joint Australian/New Zealand Handbook
$44.95+GST (Members), $56.19+GST (Retail), 77 pages

NZS/IEC 85:1984 (Withdrawn)

SAA/SNZ HB86:- A guide to the selection, care, calibration and checking of measuring instruments in
industry

HB86.1:1996 General principles


This Handbook is written for the users of measuring equipment in industry. It sets out to explain measurement and measuring
instruments in a straightforward manner. It covers such topics as selecting the right instrument for the application, what are
`accuracy` and `uncertainty of measurement`, and why instruments need to be calibrated and describes some approaches to
calibration. As the first of a series, these issues are dealt with in a generic manner, while the subsequent parts, each devoted to
specific types of measuring equipment deal with the relevant details.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 34 pages

HB86.2:1998 Simple length and angle measuring instruments


This Handbook is written for the users of simple length and angle measuring equipment in industry. A number of commonly used
instruments are discussed, (including measuring rules and tapes, micrometers, callipers, protractors and gauges and screw thread
gauges). The Handbook covers such topics as selecting the right instrument for the application, precautions to be observed in use
and storage and what checks the user can carry out to ensure that the instrument is still capable of providing the required `accuracy`.
Reference is made to Part 1 for details on `accuracy`, `uncertainty of measurement`, and why instruments need to be calibrated,
and, in this Part, some approaches to calibration are described.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 50 pages

MP 87 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment


(ANZEx Scheme)

MP 87.1:2008 Product Certification Program - Basic rules and procedures


Aligns the Australian/New Zealand Ex certification with the International ISO Type 5 Certification System (sometimes referred to as
Full Certification) based on the ISO/lEC Conformity Assessment Committee (CASCO) System 5 specification.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 60 pages

MP 87.2:2007 Recognized Service Facilities Program - Basic rules and procedures


Provides a consistent framework from which Ex service facilities can be recognized as having the facilities, management systems,
work processes and competencies to overhaul, repair or modify Ex equipment.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

HB90.0:2000 The ISO 9001 Comparison - 2000 vs 1994


This Handbook provides a side-by-side comparison of the differences between the 2000 and the 1994 editions of ISO 9001, to assist
those who wish to understand the differences between the two versions. Because of the differences in the structure of the two
versions of the Standard, some of the clauses (or parts of the clauses) of the 1994 edition are mapped against two or more clauses
of the 2000 version.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 60 pages

SAA/SNZ HB95:1998 Dangerous goods - Glossary of terms


Provides an alphabetical list of terms and definitions used in dangerous goods Standards issued up to the end of 1997. Appendices
provide background information on the derivation and use of terms and concepts in the Standards.
Joint Australian/New Zealand Handbook
$34.95+GST (Members), $43.69+GST (Retail), 44 pages

SAA/SNZ HB96:1997 Guidelines for mobile shelving for archives, libraries and museums
Provides guidelines on the different types of mobile shelving available and their method of operation, description of shelving
components and dimensions, floor loadings, tracking systems and also includes the design and installation of a typical mobile
shelving system.
Joint Australian/New Zealand Handbook
$44.95+GST (Members), $56.19+GST (Retail), 39 pages

SNZ HB 100:2005 (Withdrawn)

NZMP 103:1989 Rules of procedure for Standards Council and its committees
Sets out the proceedings to be followed by Standards New Zealand committees whenever formal rules are considered necessary.
For committees other than the Standards Council the approval of the Chairperson and the basis for the composition of the committee
is also provided.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

SAA/SNZ HB104:1997 (Withdrawn)

NZS/BSAU 110:1965 (Withdrawn)

SAA/SNZ HB114:1998 Guidelines for design of eaves and box gutters


Provides guidelines in the use of AS/NZS 3500.3.2, National plumbing and drainage Part 3.2: Stormwater drainage - Acceptable
solutions, for design of eaves and box gutters. The guidelines are especially tailored to the needs of installers and others involved
with roof drainage installations and provide clearly explained directions and fully worked examples.
Joint Australian/New Zealand Handbook
$44.95+GST (Members), $56.19+GST (Retail), 67 pages

NZS 127:1949 (Superseded by AS/NZS 2053.7)

NZS/ISO 131:1979 (Withdrawn)

NZS 135:1962 (Withdrawn)

CSA B137.8-1977 (Withdrawn, see AS/NZS 2642)

HB139(Int):1999 (Withdrawn)

AS/NZS ISO 140 Acoustics - Measurement of sound insulation in buildings and of building elements

140.7:2006 Field measurements of impact sound insulation of floors


Specifies field methods for measuring the impact sound insulation properties of buildings floors by using a standard tapping machine.
This method is applicable to bare floors and also to floors with coverings. Adopted from ISO 140-7:1998, with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

NZS/BS 143:1986, BS 1256:1986 Malleable cast iron and cast copper alloy threaded pipe fittings
Gives requirements for design and performance of pipe fittings for designs to BS 143 having taper external and taper internal threads
and having taper external and parallel internal threads.
Also numbered as BS 1256:1986; Reprinted to incorporate Amendments 1 to 4
Cited in BIA Approved Document G10/AS1 and G14/VM1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 22 pages
Amendment 1, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1990 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1993 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 1995 $29.95+GST (Members), $37.44+GST (Retail)

HB143:1999 (Superseded by SAA/SNZ HB 436:2004)


HB145:1999 Case studies - Environmental performance evaluation
This Handbook provides examples, or case studies, from organizations undertaking environmental performance evaluation. The
case studies cover a number of organizations of different sizes including manufacturing and service companies as well as
government agencies, and aim to encourage and assist organizations, particularly small and medium sized enterprises, by showing
how EPE can be conducted. This publication is identical with Draft ISO TR 14032.2. It is intended to be read in conjunction with
AS/NZS ISO 14031(Int).
Joint Australian/New Zealand Handbook
$59.95+GST (Members), $74.94+GST (Retail), 101 pages

SAA/SNZ HB150(Int):2000 (Superseded by SAA/SNZ HB90.0:2000)

IEC 155:1983 (Withdrawn)

NZS 159, Part 1:1954 (Superseded by AS/NZS 2053.1 and AS/NZS 2053.8)

NZS 160:1968 (Withdrawn)

HB 167:2006 Security risk management


Outlines a broad framework and the core elements that should be included in a security risk management process, and is consistent
with the risk management principles of AS/NZS 4360: 2004. This Handbook can be used by any size or type of organisation - from
large multinationals to small businesses, government agencies and the not-for-profit sector.
Joint Australian/New Zealand Handbook
$159.95+GST (Members), $199.94+GST (Retail), 174 pages

NZS 168:1969 (Withdrawn)

NZS 177:1969 (Withdrawn)

NZMP 200:1988 (Withdrawn)

NZMP 201:1990 (Withdrawn)

NZS 202:1966 (Withdrawn)

HB 203:2006 Environmental risk management - Principles and process


Presents an integrated framework of principles, practices and criteria for implementing best practice in environmental risk
management. It offers readers with a broad range of skills and experience of technological systems and environmental applications a
clear, credible and consistent model for environmental risk management, its process and component parts.
Joint Australian/New Zealand Handbook
$84.95+GST (Members), $106.19+GST (Retail), 106 pages

NZMP 205:1991 (Withdrawn)

HB 207:- Environmental management

HB 207.3:2005 Life cycle impact assessment - Examples of application of ISO 14042


Provides examples to illustrate current practice in carrying out a life cycle impact assessment in accordance with ISO 14042. These
are only examples of the total possible 'ways' to satisfy the provisions of ISO 14042. They reflect the key elements of the life cycle
impact assessment (LCIA) phase of the LCA. Identical to and reproduced from ISO/TR 14047:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 96 pages

NZS 211:1961 (Withdrawn)

NZS 212:1963 (Withdrawn)

SAA/SNZ HB 213:2003 Guidelines for safe working in a confined space


This Handbook provides guidance to designers, manufacturers, suppliers, employers and those who must enter or work in a
confined space, on the interpretation of AS/NZS 2865:2001.
Joint Australian/New Zealand Handbook
$74.95+GST (Members), $93.69+GST (Retail), 64 pages

BS 215: (Withdrawn)

IEC 215:1987 Safety requirements for radio transmitting equipment


Applies to radio transmitting equipment operating under the responsibility of skilled personnel and deals with protection against
electric shock, skin burns, high temperature and fire, implosion and explosion, harmful radiation and miscellaneous hazards.
Includes design and construction requirements and test methods to ensure (a) safety of personnel, when the equipment is operating
under conditions of normal use and certain fault conditions, when carrying out adjustments, during fault finding, and repairing of the
equipment; and (b) prevention of fire and its spread.
Endorsed Standard
$201.75+GST (Members), $252.19+GST (Retail), 49 pages

HB 219:2006 Earth potential rise - Protection of telecommunications network users, personnel and plant
- Worked examples for the application guide
Provides worked examples that supplement the understanding of the main application guide AS/NZS 3835.2. This Handbook should
be read in conjunction with AS/NZS 3835.2.
Joint Australian/New Zealand Handbook
$129.95+GST (Members), $162.44+GST (Retail), 80 pages

HB 221:2004 Business continuity management


Sets out a definition and process for business continuity management, and provides a workbook that may be used by organisations
to assist in implementation.
Joint Australian/New Zealand Handbook
$49.95+GST (Members), $62.44+GST (Retail), 50 pages

NZS/ISO 226:1987 (Withdrawn)

HB 228:2001 Guidelines for managing risk in healthcare


The Guidelines provide a generic framework for managing risk in the health sector. They provide a reference point for boards of
management, senior executives with clinical and corporate governance responsibilities, together with risk management and clinical
staff. These guidelines are based on AS/NZS 4360:1999 Risk management.
Joint Australian/New Zealand Handbook
$59.95+GST (Members), $74.94+GST (Retail), 126 pages

HB 231:2004 Information security risk management guidelines


Provides a generic guide for the establishment and implementation a risk management process for information security risks.
Joint Australian/New Zealand Handbook
$59.95+GST (Members), $74.94+GST (Retail), 57 pages

IEC 238:1987 (Withdrawn)

NZS 245:1962 (Withdrawn)


HB255:2002 ISO/TR 19121 Geographic information - Imagery and gridded data
Reviews the manner by which geographic information users and the 19200 series of standards handle imagery and gridded data.
Presents a plan to address the imagery and gridded data in an integrated manner.
Joint Australian/New Zealand Handbook
$49.95+GST (Members), $62.44+GST (Retail), 35 pages

HB 256:2007 Metadata usage in Australian and New Zealand education and training
To provide information and practical guidance for the creation and management of online content in the learning, education, training,
educational administration and research environments.
Joint Australian/New Zealand Handbook
$64.95+GST (Members), $81.19+GST (Retail), 78 pages

NZS/ISO 266:1975 (Withdrawn)

NZS/ISO 273:1979 (Withdrawn)

NZS 285:1959 (Superseded by NZS 3202:1977)

NZS/ISO 286: (Withdrawn)

NZS/BS 292: (Withdrawn)

HB 294:2006 National Post-Border Weed Risk Management Protocol


Fosters the use and further development of decision support systems for prioritising weed species for management at the regional,
state/territory and national levels.
Joint Australian/New Zealand Handbook
$84.95+GST (Members), $106.19+GST (Retail), 86 pages

HB 296:2007 Legal risk management


Provides guidelines to lawyers on how to align their provision of legal services to best meet their client's needs by utilising the Risk
Management Standard (AS/NZS 4360). It can also be used by their clients to determine the nature of the legal risk management
services they would like to receive.
Joint Australian/New Zealand Handbook
$59.95+GST (Members), $74.94+GST (Retail), 46 pages

NZS/BS 302: (Withdrawn)

NZS 325:1969 (Superseded by NZS 5443)

NZS/BS 328.1-1986 (Superseded by AS/NZS 2438)

NZS/BS 328.2-1972 (Withdrawn)

NZS/BS 328.3-1983 (Withdrawn)

NZS/BS 328.4-1983 (Withdrawn)

NZS/BS 328.5-1983 (Withdrawn)


NZS/BS 328.6-1992 (Withdrawn)

NZS/BS 328.7-1992 (Withdrawn)

NZS/BS 328.8-1992 (Withdrawn)

NZS 354:1967 (Withdrawn)

IEC 357:1982 (Withdrawn)

NZS/ISO 362:1981 (Withdrawn)

NZS 366:1963 (Withdrawn)

NZS 376, Part 1:1949 (Withdrawn)

NZS 380:1968 (Withdrawn)

IEC 383:1983 (Withdrawn)

NZS/ASTM D390:1986 (Withdrawn)

IEC 400:1987 (Withdrawn)

NZS 405, Part 1:1959 (Withdrawn)

NZS/BS 410:1986 (Withdrawn)

IEC 416 (1988) (Withdrawn)

HB 436:2004 Risk Management Guidelines - Companion to AS/NZS 4360:2004


This Handbook provides generic guidance for establishing and implementing effective risk management processes in any
organization. It demonstrates how to establish the proper context, and then how to identify, analyse, evaluate, treat, communicate
and monitor risks.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Handbook
$79.95+GST (Members), $99.94+GST (Retail), 116 pages
Amendment 1, 2005 $24.95+GST (Members), $31.19+GST (Retail)

NZS/BS 463.2-1970 (Withdrawn)

NZS/BS EN 471(Int):1994 (Superseded by AS/NZS 4602:1999)

NZS/BS 476:- Fire tests on building materials and structures


Part 4:1970 (Withdrawn)

Part 8:1972 (Withdrawn)

Part 20:1987 Method for determination of the fire resistance of elements of construction (general
principles)
General details of test conditions, specimens, apparatus and criteria for fire resistance testing. Appendices give general guidance
information, method for residual loadbearing capacity and operating instructions.
Cited in BIA Approved Document C/AS1
Adopted Standard
$393.94+GST (Members), $492.43+GST (Retail), 40 pages

Part 21:1987 Methods for determination of the fire resistance of loadbearing elements of construction
Detailed test requirements for beams, columns, floors and flat roofs and walls.
Cited in BIA Approved Document C/AS1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 20 pages

Part 22:1987 Methods for determination of the fire resistance of non-loadbearing elements of
construction
Detailed test requirements for partitions, fully insulated, partially insulated and uninsulated doorsets and shutter assemblies, ceiling
membranes and glazed elements.
Cited in BIA Approved Document C/AS1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages

NZS 485:1969 (Withdrawn)

NZS/BS 490: (Withdrawn)

NZS 493:1950 (Withdrawn)

NZS 501:- Gerber method for the determination of fat in milk and milk products

Part 1:1957 (Withdrawn)

Part 2:1971 Methods


For homogenized and sterilized milk; skim milk, separated milk, buttermilk and whey; cream (using cream and milk butyrometers);
dried milk; and cheese (using cheese and milk butyrometers). Specification for amyl alcohol. Identical to BS 696:Part 2:1969, with
national modifications.
Adopted Standard
$121.21+GST (Members), $151.51+GST (Retail), 28 pages
Amendment A, 1982 $29.95+GST (Members), $37.44+GST (Retail)

NZS/ANSI/NFPA 505:1996 (Withdrawn)

NZS 508:1966 (Withdrawn)

NZS 514:1948 (Withdrawn)

NZS 515:1948 (Withdrawn)

NZS 516:1948 (Withdrawn)


NZS 517:1948 (Withdrawn)

NZS 518:1948 (Withdrawn)

NZS 519:1966 (Withdrawn)

NZS 521:1952 (Withdrawn)

NZS/ISO 525:1986 (Withdrawn)

NZS 535, 2175:1967 (Withdrawn)

AS/NZS ISO 544:2005 Welding consumables -Technical delivery conditions for welding filler materials -Type of
product, dimensions, tolerances and markings
Provides requirements for the technical delivery conditions of welding filler materials for fusion welding. Identical to and reproduced
from ISO 544:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

NZS/ANSI/UL 558:1991 (Withdrawn)

NZS/ANSI/UL 583:1991 (Withdrawn)

NZS 584:1950 (Withdrawn)

NZS 588:1958 (Withdrawn)

NZS/ISO 606:1994 (Withdrawn)

NZS/IEC 617:- Graphical symbols for diagrams

Part 2:1983 (Withdrawn)

Part 3:1983 (Withdrawn)

Part 4:1983 (Withdrawn)

Part 5:1983 (Withdrawn)

Part 6:1983 (Withdrawn)

Part 7:1983 (Withdrawn)

Part 8:1983 (Withdrawn)


Part 9:1983 (Withdrawn)

Part 10:1983 (Withdrawn)

Part 11:1983 (Withdrawn)

Part 12:1991 (Superseded by AS/NZS 1102.112)

Part 13:1993 (Superseded by AS/NZS 1102.113)

NZSS 623:1964 (Withdrawn)

NZS 623P:1984 (Superseded by NZS 3910)

NZS 625:1950 (Withdrawn)

NZS 632:1967 (Withdrawn)

NZS/API 650:1998 Welded steel tanks for oil storage


Covers material, design, fabrication, erection, and testing requirements for aboveground, vertical, cylindrical, closed- and open-top,
welded steel storage tanks in various sizes and capacities. Applies to tanks with internal pressures approximating atmospheric
pressure, but higher pressure is permitted when additional requirements are met. This standard applies only to tanks whose entire
bottoms are uniformly supported and in non-refrigerated service, with a maximum operating temperature of 90 degrees Celsius.
Adopted Standard
$955.80+GST (Members), $1,194.75+GST (Retail), 194 pages

NZS/ISO 668:1988 (Superseded, see AS/NZS 3711.1)

IEC 669-1 (1981) (Withdrawn)

NZS 696, Part 2:1966 (Withdrawn)

NZS 697:1960 (Withdrawn)

AS/NZS ISO 717:- Acoustics - Rating of sound insulation in buildings and of building elements

717.1:2004 Airborne sound insulation


Provides a method whereby the frequency dependent values of airborne sound insulation of building elements and in building can be
converted into a single number characterizing the acoustical performance. This Standard is identical with and reproduced from ISO
717-1:1996.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 19 pages

NZS 726:1968 (Superseded by BS 507:1985)

NZS 733:1966 (Superseded by NZS 6315/AS 3313)


NZS 734:1965 (Withdrawn)

NZS 743:1950 (Withdrawn)

NZS/BS 750:1984 Specification for underground fire hydrants and surface box frames and covers
Requirements for hydrants with valves of the wedge gate type and the screw-down type suitable for a maximum working pressure of
16 bar gauge. Also specifies requirements for their surface box frames and covers.
Adopted Standard
$345.45+GST (Members), $431.81+GST (Retail), 16 pages
Amendment 1, 1993 $29.95+GST (Members), $37.44+GST (Retail)

NZS/IEC 751:1983 (Withdrawn)

NZS 755:1968 (Withdrawn)

IEC 757 (1983) Code for designation of colours


Applies to the text of descriptions, drawings, markings, etc., in the electrotechnical field and lays down a letter code for the
designation of some distinct colour.
Endorsed Standard
$36.84+GST (Members), $46.05+GST (Retail), 7 pages

NZS/BS 767:1983 (Withdrawn)

NZS 773:1967 (Withdrawn)

NZS/ISO 780:1985 (Withdrawn)

NZS/BS 806:1993 Specification for design and construction of ferrous piping installations for and in
connection with land boilers
For pipework connecting land steam boilers to prime movers or industrial plant, and for all ancillary steam and water services with
pipe fittings forming part of such installations. For pipes of any bore, where pressure exceeds 3.5 bar, and over 250 mm bore in
steam service at pressure up to and including 3.5 bar.
Adopted Standard
$654.55+GST (Members), $818.19+GST (Retail), 128 pages
Enquiry case 806/8, 1993

IEC 817:1984 (Withdrawn)

NZS/ISO 830:1981 (Superseded by AS/NZS 3711.2)

NZS/IEC 833:1987 (Withdrawn)

NZS/ISO 834:1975 Fire-resistance tests. Elements of building construction


Specifies standard heating and pressure conditions, a test method and criteria for the determination of the fire resistance of elements
of building construction of various categories. Applicable to walls and partitions; columns; beams; floors (with or without ceilings);
roofs (with or without ceilings).
Adopted Standard
$150.88+GST (Members), $188.60+GST (Retail), 16 pages
Amendment 1, 1979 $66.66+GST (Members), $83.33+GST (Retail)
Amendment 2, 1980 $66.66+GST (Members), $83.33+GST (Retail)
NZS 836:1964 (Withdrawn)

NZS 841:1964 (Withdrawn)

NZS 843:1951 (Withdrawn)

NZS 844:1951 (Withdrawn)

NZS/BS 853:1990 (Withdrawn)

NZS 878:1951 (Withdrawn)

NZS 899:1968 (Withdrawn)

NZS 902:1966 (Withdrawn)

NZS 904:1966 (Withdrawn)

NZS/BS EN 906:1996 (Withdrawn)

NZS 910:1965 (Withdrawn)

NZS/ISO 917:1989 (Withdrawn)

NZS 918:1965 (Withdrawn)

NZS/BS 949:- Screwing taps

Part 1:1992 Specification for general dimensions


Specifies general dimensions and tolerances for ISO metric coarse and fine pitch, UNC, UNF, BSW and BA threads.
Adopted Standard
$193.94+GST (Members), $242.43+GST (Retail), 12 pages

Part 2:1992 Specification for unified ground thread taps: Manufacturing tolerances
Specifies dimensions and manufacturing tolerances for screwing taps for UNC, UNF, BSW and BA threads.
Four foldouts
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages

Part 3:1993 Specification for pipe thread taps


Specifies dimensions and tolerances for screwing taps for parallel internal pipe threads for use where pressure-tight joints are not
required (G series threads); parallel internal pipe threads for use with taper external pipe threads for pressure-tight joints (Rp series
threads); and taper internal threads for use with external pipe threads in making pressure-tight joints (Rc series threads).
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 16 pages

NZS 952:1952 (Superseded by AS/NZS 3350.2.74:1996)

NZS/BS 969:1982 (Withdrawn)


NZS/BS 970:- Specification for wrought steels for mechanical and allied engineering purposes

Part 1:1991 General inspection and testing procedures and specific requirements for carbon, carbon
manganese, alloy and stainless steels
Requirements for steelmaking and general testing procedures for the release of steel in the form of blooms, billets, slabs, bars, rods
and forgings used in the as-rolled, as-forged, annealed or normalized condition.
Cited in BIA Approved Document E1/AS1
Adopted Standard
$393.94+GST (Members), $492.43+GST (Retail), 62 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

Part 2:1988 (Withdrawn)

Part 3:1991 (Withdrawn)

Part 4:1970 (Withdrawn)

NZS 973:1965 (Withdrawn)

NZS 974:1951 (Withdrawn)

NZS 975:1966 (Withdrawn)

AS/NZS 999:1999 Information and documentation - Guidelines for the content, organization and presentation
of indexes
Provides guidelines for the content, organization and presentation of indexes. These apply to indexes of books, periodicals, reports,
patent documents and other written or printed documents, and also to non-print materials, such as electronic documents, films,
sound recordings, video recording, graphic material, maps and three-dimensional objects. This Standard is identical with and has
been reproduced from ISO 999:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 47 pages

NZS/ISO 1005:- Railway rolling stock material

Part 1:1994 Rough-rolled tyres for tractive and trailing stock. Quality requirements
Specifies requirements for the manufacture and supply of rough-rolled tyres for tractive and trailing stock of unalloyed steels.
Adopted Standard
$161.40+GST (Members), $201.75+GST (Retail), 17 pages

Part 2:1986 Tyres, wheel centres and tyred wheels for tractive and trailing stock. Dimensional,
balancing and assembly requirement
Specifies the dimensional requirements, surface roughness and, as appropriate, the permissible residual static unbalance for tyres,
wheel centres and tyred wheels in the various degrees of finish. Also the manufacturing requirements for tyred wheels.
Adopted Standard
$161.40+GST (Members), $201.75+GST (Retail), 17 pages

Part 3:1982 Axles for tractive and trailing stock. Quality requirements
Requirements for the manufacture and supply of axles for tractive and trailer stock of unalloyed and alloyed steels.
Adopted Standard
$115.79+GST (Members), $144.74+GST (Retail), 10 pages

Part 4:1986 Rod or forged wheel centres for tyred wheels for tractive and trailing stock. Quality
requirements
Specifies requirements for the manufacture and supply of rolled or forged wheel centres for tractive and trailing stock, which are
suitable for tyring and are made of unalloyed steels.
Adopted Standard
$115.79+GST (Members), $144.74+GST (Retail), 9 pages

Part 6:1994 Solid wheels for tractive and trailing stock. Technical delivery conditions
Requirements for the manufacture and supply of rolled, forged or cast solid wheels for tractive and trailing stock of unalloyed steels.
Adopted Standard
$185.97+GST (Members), $232.46+GST (Retail), 21 pages

Part 7:1982 Wheelsets for tractive and trailing stock. Quality requirements
Requirements for the assembly by press fitting or shrink fitting onto axles of solid wheels, wheel centres, wheel centres complete
with tyres, axle-mounted brake discs, dynamo pulleys, gear wheels, chain wheels and any other components specified by the
purchaser into complete wheelsets. Also specifies the dimensions and tolerances of the completed assembly and the conditions of
inspection and supply.
Adopted Standard
$150.88+GST (Members), $188.60+GST (Retail), 15 pages

NZS/BS 1006:1990 (Withdrawn)

NZS 1013:1963 (Withdrawn)

AS/NZS 1020:1995 The control of undesirable static electricity


Provides recommendations relating to safe control of electrostatic charges generated incidentally by processes or activities. Its
purpose is to assist in reducing fire, explosion and nuisance aspects associated with static electricity. It outlines conditions under
which the presence of static causes a hazard and recommends methods for its safe dissipation or mitigation. Appendices provide
information on the hazards caused by static electricity in the vicinity of flammable mixtures, and on minimum ignition energies for a
range of chemicals, and give examples of solving problems resulting from static electricity.
Cited in Hazardous Substances (Classes 1 to 5 Controls) Regulations 2001
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 74 pages

NZS 1021:1965 (Superseded by NZS 6507)

NZS 1023:1953 (Withdrawn)

NZS/AS 1023:- (Withdrawn)

AS/NZS 1026:2004 Electric cables - Impregnated paper insulated - For working voltages up to and including
19/33 (36) kV
Specifies requirements for non-draining mass-impregnated paper insulated and lead alloy sheathed cables for working voltages up
to and including 19/33 (36) kV.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 47 pages

NZS/AS 1029:- (Withdrawn)

NZS 1034:1953 (Withdrawn)

AS/NZS 1044:1995 (Superseded by AS/NZS CISPR 14.1:2003)

AS/NZS 1050:- Methods for the analysis of iron and steel

1050.1:1996 Sampling iron and steel for chemical analysis


Describes methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast iron and
steel. Procedures are described for use with both liquid and solid metal.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages

1050.2:1994 Determination of carbon content - Gravimetric method


Specifies a gravimetric method for the determination of carbon content between 0.05 percent and 4.5 percent in all types of iron and
steel.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

1050.6:1995 Determination of tin content - Flame atomic absorption spectrometric method


Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is
digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous
oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1050.8:1994 Determination of manganese content - Spectrophotometric method


Specifies a spectrophotometric method for the determination of manganese content between 0.01 percent and 2 percent in all types
of iron and steel.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1050.14:1994 Determination of manganese in iron and steel - Titrimetric method


This method sets out a titrimetric method, using the permanganate ion formed by oxidation, for the determination of the manganese
content of iron and steel. The method covers the range 0.50 percent to 15 percent manganese and is applicable to all grades of iron
and steel.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1050.16:1994 Determination of sulphur - Infrared absorption method after combustion in an induction


furnace
Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a
high frequency induction furnace. The method can be used for the determination of sulphur content between 0.002 percent and 0.10
percent in steel. This standard is identical with and reproduced from ISO 4935:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1050.18:1994 Determination of phosphorus - Spectrophotometric method


Specifies a spectrophotometric method for the determination of the phosphorus content of iron and steel. The method is applicable to
the determination of phosphorus contents between 0.005 percent and 2.0 percent, provided that the following elements are not
present in amounts greater than that specified: niobium 1 percent, tantalum 1 percent, titanium 2 percent, tungsten 11 percent,
zirconium 1 percent.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1050.20:1994 Determination of magnesium content - Flame atomic absorption spectrometric method


Specifies a flame atomic absorption spectrometric method for the determination of magnesium content between 0.010 percent and
0.25 percent in all types of iron and steel.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1050.21:1994 Determination of cobalt content - Spectrophotometric method


Specifies a spectrophotometric method for the determination of cobalt content up to 12 percent in all grades of iron and steel
containing less than 10.0 percent copper. The sample is dissolved in acid and nitroso-R-salt added. This forms a red-brown
chromophore which is measured spectrophotometrically at 580 nm.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1050.24:1994 Determination of aluminium content - Spectrophotometric method


Specifies a spectrophotometric method for the determination of aluminium content in the range of 0.002 percent to 1.4 percent
aluminium in all types of iron and steel. The method uses a mercury cathode, followed by solvent extraction to separate interfering
elements, with alizarin red S to produce a chromogen which is measured at a wavelength of 490 nm.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

1050.26:1994 Silicon in iron and steel - Spectrophotometric method


Specifies a spectrophotometric method using reduced beta-silicomolybdate complex, for the determination of the total silicon content
of iron and steel. The method covers the range 0.005 percent to 5.0 percent silicon and is applicable to all grades of iron and steel.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

1050.27:1994 Determination of titanium content - Spectrophotometric method


Specifies a spectrophotometric method using diantipyryl-methane as a chromogen, measured spectrophotometrically at 390 nm. The
method can be used for the determination of titanium content between 0.005 percent and 1.20 percent in steel.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1050.28:1994 Vanadium in steel - Potentiometric method


Specifies a potentiometric method for the determination of vanadium in both low and high alloy steels containing 0.003 percent to
2.00 percent vanadium.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1050.30:1994 Determination of boron content - Curcumin spectrophotometric method


Specifies a spectrophotometric method for the determination of boron content between 0.0005 percent and 0.01 percent in steel.
This standard is technically identical with and reproduced from ISO 10153:1991.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 10 pages

1050.31:1994 Determination of niobium content - PAR spectrophotometric method


Specifies a PAR spectrometric method for the determination of niobium content between 0.005 percent and 1.3 percent in steel.
This standard is technically identical with and reproduced from ISO 9441:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1050.32:1994 Determination of carbon content - Infrared method


Specifies an infrared method for the determination of carbon in iron and steel after combustion in oxygen using high frequency
induction heating. The method is applicable to all types of iron and steel with carbon content in the range 0.002 percent to 4.5
percent carbon.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1050.37:1994 Determination of copper content - Flame atomic absorption spectrometric method


Specifies a flame atomic absorption spectrometric method for the determination of copper content between 0.004 percent and 0.50
percent in steel. This standard is identical with and reproduced from ISO 4943:1985.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1050.38:1994 Determination of vanadium content - Flame atomic absorption spectrometric method


Specifies a flame atomic absorption spectrometric method for the determination of vanadium content between 0.005 percent and 1.0
percent in steel. This standard is identical with and reproduced from ISO 9647:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

1050.39:1994 Determination of chromium content - Flame atomic absorption spectrometric method


Specifies a flame atomic absorption spectrometric method for the determination of chromium content between 0.002 percent and 2.0
percent in non-alloy and low alloy steel. The procedure involves dissolution of a test portion in acid and determination of the atomic
absorption of the chromium spectral line, measured at either 357.9 nm or 425.4 nm in a flame atomic absorption spectrometer. This
standard is identical with and reproduced from ISO 10138:1991.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 10 pages

AS/NZS 1052.1:1995 (Superseded by AS/NZS CISPR 16.1:2002)

AS/NZS 1052.2:1999 (Superseded by AS/NZS CISPR 16.2:2002)


AS/NZS 1053:1999 (Superseded by AS/NZS CISPR 13:2003)

NZS 1055:1953 (Superseded by AS/NZS 3172)

NZS 1056:1952 (Withdrawn)

AS/NZS 1056:- Storage water heaters

1056.4:1997 Daily energy consumption calculations for electric types


Sets out a method for calculating the energy consumption of electric storage water heaters fitted with electric resistance heating
units. This Standard is not applicable to gas water heaters, solar water heaters, heat-exchangers or heat-pumps. The Standard is
based on known performance characteristics of electric storage water heaters under static conditions (i.e. standing heat losses with
no deliver) and using an energy delivery of 37.7 MJ per day (equivalent to a volume of 200 L of water raised in temperature by 45
degrees C).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

NZS 1057:1967 Stretchers for ambulance purposes


Applies to the manufacture of the following types of stretchers suitable for general ambulance work: Type 1, a wooden bearer
collapsible stretcher with fixed, sliding or folding handles, and Type 2, a tubular steel (or suitable metal alloy) frame fixed stretcher
with telescopic or fixed handles.
Reprinted to append Amendment 1:1978
$34.95+GST (Members), $43.69+GST (Retail), 16 pages
Amendment 1, 1978 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1067:2003 Sunglasses and fashion spectacles


Proposes a specification of physical properties for sunglasses and sunglass lenses of nominal plano power, and which are not
prescription lenses, intended for protection against solar radiation for general use, for social and domestic purposes, including road
use and driving.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 50 pages

NZS 1069:1966 (Withdrawn and obsolescent, see AS/NZS 1110)

NZS/ISO 1074:1975 (Withdrawn)

AS/NZS 1080:- Timber - Methods of test

1080.1:1997 Method 1: Moisture content


Specifies methods for sampling and testing timber for moisture content by oven drying and by use of an electrical resistance
moisture meter. Correction figures for a large number of Australian, New Zealand and imported species, seasoned, unseasoned and
treated, are provided.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages

1080.2:2006 Slope of grain


Sets out four test methods for determining the slope of grain in timber articles. The test methods determine only whether or not a
piece of timber has slope of grain and its magnitude. The methods do not set down any criteria for grade specifications.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 8 pages

1080.3:2000 Method 3: Density


Technically equivalent to ISO 3131-1975, it covers density at the moisture content at the time of test (nominal density), oven dry
density and conventional density (basic density). A method is given for calculating the nominal density adjusted to 12 percent
moisture content.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 1088:- Hearing aids

1088.9:1995 Immunity requirements and methods of measurement for hearing aids exposed to
radiofrequency fields in the frequency range 300 MHz to 3 GHz
Specifies electromagnetic immunity requirements to the frequency band 300 MHz to 3 GHz for hearing aids with acoustic outputs.
Hearing aids worn behind the ear, in the ear and on the body are covered, including those fitted with induction pickup coils.
Protection requirements are provided for operation in the general environment and test methods for assessing those requirements
are included.
Reprinted to append Amendment 1:1996
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 1100:- Technical drawing

1100.101-1992 General principles


Sets out basic principles of technical drawing practice, and covers terminology and abbreviations used in technical drawings;
materials, sizes and layout of drawing sheets; types and thicknesses of lines; types and dimensions of letters, numerals and
symbols; drawing scales; projectioning; sectioning; dimensioning and geometry tolerancing and the conventional representation of
features and parts. Appendices provide information on the development of pictorial drawings and geometry tolerancing.
Reprinted to append Amendment 1: 1994
Adopted Standard
$229.55+GST (Members), $286.94+GST (Retail), 229 pages
Amendment 1, 1994 $25.00+GST (Members), $31.25+GST (Retail)

1100.201-1992 Mechanical engineering drawing


Sets out recommendations for mechanical engineering drawing practice. Provides information on surface texture and welding, and
the simplified representation of pipelines. Provides details on springs, gears, splines, rolling element bearings, seals and knurling.
Appendices provide guidance on the tolerance of machined components and castings.
Adopted Standard
$152.28+GST (Members), $190.35+GST (Retail), 71 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)

1100.301-1985 Architectural drawing


Sets out recommendations for the preparation of plans for architectural work. The first two sections, taken with Part 101 of NZS/AS
1100, provide a common method for representation of buildings and building components. Section 3 deals with levels and gradients,
and Section 4 with conventions for doors, windows and miscellaneous other features. Section 5 gives recommendations for the
representation of materials by colouring and hatching. Appendices give further information on cross-referencing, dimensioning by
coordinates and the use of grids.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 19 pages
Amendment A, 1994 $29.95+GST (Members), $37.44+GST (Retail)

1100.301, Supplement 1-1986 Architectural drawings


Gives typical drawings illustrating the use of conventions specified in the Standard. This Supplement should be read in conjunction
with the Standard.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 6 pages

1100.401-1984 Engineering survey and engineering survey design drawing


Sets out recommendations for the preparation of survey plans for engineering works and the illustration of proposed, designed and
executed engineering works based on such survey plans. The first two sections, taken with Part 101 of NZS/AS 1100, provide a
common language for the interdisciplinary communications of information by means of engineering survey and engineering survey
design drawings. Section 3 provides symbols and abbreviations for use on special purpose drawings such as identification of details
for a specific utility.
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 57 pages
Amendment 1, 1984 $29.95+GST (Members), $37.44+GST (Retail)

1100.401, Supplement 1-1984 (Withdrawn)


1100.401, Supplement 2-1984 (Withdrawn)

1100.401, Supplement 3-1984 (Withdrawn)

1100.401, Supplement 4-1984 (Withdrawn)

1100.501:2002 Structural engineering drawing


Sets out requirements and recommendations for structural engineering drawings to obtain common practice for the representation of
structures and components, including reinforced and prestressed concrete, structural steel, timber and masonry. The methods form
a basis for more detained rules for specific applications. It adds to the requirements of AS 1100.101-1992 Technical drawing, Part
101: General principles.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 31 pages

1100.501, Supplement 1-1986 (Superseded by AS/NZS 1100.501:2002)

NZS/AS 1101.3-1987 (Withdrawn)

AS/NZS 1102:- Graphical symbols for electrotechnical documentation

1102.102:1997 Symbol elements, qualifying symbols and other symbols having general application
Provides information on symbol elements, qualifying symbols and other symbols having general application to the AS/NZS 1102
series. Based on but not equivalent to and reproduced from IEC 60617-2:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 39 pages

1102.103:1997 Conductors and connecting devices


Provides symbols for conductors and connecting devices, including terminals and cable fittings. Based on but not equivalent to and
reproduced from IEC 60617-3:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1102.104:1997 Basic passive components


Provides symbols for basic passive components such as resistors, capacitors and inductors, ferrite cores, magnetic storage
matrices, piezoelectric crystals, electret and delay lines. Based on but not equivalent to and reproduced from IEC 60617-4:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1102.105:1997 Semiconductors and electron tubes


Provides symbols for semiconductor devices and electron tubes. This Standard is technically equivalent to and reproduced from IEC
60617-5:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 49 pages

1102.106:1997 Production and conversion of electrical energy


Provides symbols for production and conversion of electrical energy, including windings, machines, transformers, reactors, primary
cells and accumulators. Based on but not equivalent to and reproduced from IEC 60617-6:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 43 pages

1102.107:1997 Switchgear, controlgear and protective devices


Provides symbols for switchgear, controlgear and protective devices, including starters, relays, proximity and touch-sensitive
devices, igniters and flag indicators. Based on but not equivalent to and reproduced from IEC 60617-7:1996.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 66 pages

1102.108:1997 Measuring instruments, lamps and signalling devices


Provides symbols for measuring instruments, lamps and signalling devices, indicating/recording/ integrating instruments, counting
devices, thermocouples, telemetering devices and electric clocks. Based on but not equivalent to and reproduced from IEC 60617-
8:1996.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
1102.109:1997 Telecommunications - Switching and peripheral equipment
Provides symbols for telecommunications switching and peripheral equipment, transducers, recorders and reproducers. Based on
but not equivalent to and reproduced from IEC 60617-9:1996.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

1102.110:1997 Telecommunications - Transmission


Provides symbols for telecommunications transmission, including telecommunication circuits, antennas, radio stations, microwave
technology, frequency spectrum diagrams and fibre optics. This Standard is technically equivalent to and reproduced from IEC
60617-10:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 61 pages

1102.111:1997 Architectural and topographical installation plans and diagrams


Covers symbols on location diagrams for electrical equipment, electrical lighting, security and communication services, reticulation
plans of electrical power systems and networks, topological maps of power supply systems and location of airport lighting. This
Standard is technically equivalent to and reproduced from IEC 60617-11:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

1102.112:1995 Binary logic elements


Provides symbols for logic functions and their usage. The symbols have been prepared with a view to electrical applications but may
also be applied to non-electrical systems. This standard is identical with and reproduced from IEC 60617-12:1991.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 170 pages

1102.113:1995 Analogue elements


Provides symbols to represent functions and devices for operating and producing analogue quantities. This standard is identical with
and reproduced from IEC 60617-13:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 31 pages

NZS/AS 1103.1-1973 (Superseded by AS/NZS 4383.1:1996)

NZS/AS 1103.3-1989 (Superseded by AS/NZS 4383.1:1996)

NZS/AS 1103.4-1992 (Superseded by AS/NZS 4383.2:1996)

NZS/AS 1103.5-1978 (Superseded by AS/NZS 4383.3:1996)

NZS/AS 1103.6-1981 (Superseded by AS/NZS 4383.3:1996)

NZS/AS 1103.7-1984 (Superseded by AS/NZS 4383.1:1996 and AS/NZS 4383.2:1996)

NZS/AS 1103.8-1986 (Superseded by AS/NZS 4383.1:1996 and AS/NZS 4383.2:1996)

NZS 1106:1954 (Withdrawn)

AS/NZS 1110:1995 (Withdrawn)

AS/NZS 1111:1996 (Withdrawn)

AS/NZS 1112:1996 (Withdrawn)


NZS 1121:1953 (Withdrawn)

NZS 1123:1953 (Withdrawn)

NZS/BS 1123.1-1987 (Withdrawn)

NZS 1125:1953 (Withdrawn)

AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords


Specifies the requirements for conductors in insulated electric cables and flexible cords used for general wiring cables for land
installations and, in the case of copper conductors only, for ships' wiring. The Standard does not apply to material used for the
manufacture of conductors.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

NZS 1127:1954 (Withdrawn)

NZS/AS 1128:1972 (Withdrawn)

AS/NZS 1133:1996 Wool - Determination by the Airflow Method of the mean fibre diameter of core samples of
raw wool
Sets out a method for the determination of the mean fibre diameter of wool fibres sampled from bales of raw wool by coring, using
cutters of nominal diameter from 12mm to 25 mm. This standard is identical with and reproduced from IWTO-28-93.
Reprinted to append Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1134:1999 Wool - Determination of wool base and vegetable matter base of core samples of raw wool
Sets out the procedure to be used for determination of the wool base and vegetable matter base from which the commercial yields of
classed growers' lots, interiors, bulk classed lots and deliveries are calculated. Applicable to core samples only and covers all forms
of raw wool. This Standard is identical with and has been reproduced from IWTO-19-98.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 49 pages

NZS/AS 1136.1-1988 (Withdrawn)

BS 1142:1989 (Superseded by AS/NZS 1859)

AS/NZS 1148:2001 Timber - Nomenclature - Australian, New Zealand and imported species
Sets out a list of botanical names and preferred common names for tree species for use in orders and specifications. Preferred
common names have been provided for use in specifying. An alphabetical index is provided, including both botanical names and
preferred common names. Other information includes identification of hardwoods and softwoods, normal sources of supply, and, for
reference only, other names.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 211 pages

NZS 1153: (Withdrawn)


NZS/ISO 1155:1978 (Withdrawn)

NZS 1157:1969 (Withdrawn)

NZS/BS 1157:1975 (Withdrawn)

NZS 1158:1965 (Withdrawn)

AS/NZS 1158:- Road lighting

1158.0:2005 Introduction
Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms
essential to the understanding of other Standards in the series especially Parts 1.1, 2, 3.1 and 6.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

1158.1:- Vehicular traffic (Category V) lighting

1158.1.1:2005 Performance and design requirements


Specifies performance and design requirements for Category V lighting schemes as described in AS/NZS 1158.0. Also specifies
data needed to design for and assess compliance with those requirements.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

1158.1.3:1997 Guide to design, installation, operation and maintenance


Sets out guidelines for the design, installation, operation and maintenance of lighting systems for roads which require Category V
lighting complying with AS/NZS 1158.1.1, i.e. traffic routes, including arterial roads and freeways. It is intended to be read in
conjunction with AS/NZS 1158.1.1 and provides background information and advice to assist in the application of the requirements of
that Standard.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 115 pages

1158.2:2005 Computer procedures for the calculation of light technical parameters for Category V and
Category P lighting
Specifies the computer-based design procedures applicable to Categories V and P lighting for the calculation of light technical
parameters (LTPs), as required, for the design or evaluation of road lighting in accordance with the requirements of AS/NZS
1158.1.1 and AS/NZS 1158.3.1. The source code of one computer program, designated SAA STAN, together with a shell program
designated STANSHELL, are given for the calculation of the LTPs for Category V lighting on straight sections of road. This source
code and shell program are available on a CD ROM provided in a pocket inside the back cover of this Standard.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

1158.3:- Pedestrian area (Category P) lighting

1158.3.1:2005 Performance and design requirements


Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. It also specifies
the luminaire data and other data that is needed to facilitate the lighting design and the assessment of compliance with the
requirements of this Standard.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 56 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)
1158.5:2007 Tunnels and underpasses
Specifies performance and design requirements for lighting schemes for tunnels and underpasses. It also specifies the luminaire
data and other design data that is needed to facilitate the lighting design and the assessment of compliance with the requirements of
this Standard.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 52 pages

1158.6:2004 Lighting for roads and public spaces - Luminaires


Sets out requirements for the design, construction, performance and testing of luminaires intended for use in Category V and
Category P lighting schemes as per AS/NZS 1158.1.1 and AS/NZS 1158.3.1 respectively.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

NZS/AS 1161:1984 (Withdrawn)

NZS/ISO 1161:1984 (Superseded by AS/NZS 3711.3)

AS/NZS 1167:- Welding and brazing - Filler metals

1167.1:2005 Filler metal for brazing and braze welding


Specifies the chemical composition and approximate melting ranges of 29 types of brazing alloys grouped as silver brazing, copper-
phosphorus brazing, copper brazing, and aluminium brazing alloys. A uniform system of colour coding for the purposes of
identification is included together with a table of the equivalent British, American, German and ISO designations.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1167.2:1999 Filler metal for welding


Specifies requirements for ferrous and non-ferrous, fluxed or unfluxed filler metal for welding. The classification system adopted is
basically in line with ANSI/AWS classification. Filler metals are given in seven groups - carbon and intermediate alloy steels, high
alloy steels, cast iron, copper and copper alloys, magnesium alloys, aluminium alloys, nickel and nickel alloys. An appendix providing
a guide to the application of filler metals is included.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 1170:- Structural design actions

1170.0:2002 General principles


Provides the procedure for structural design. It includes design procedures, reference to design actions (other parts of the series),
combinations of actions, detailing for robustness, methods of analysis and methods for confirmation of a limit states design. It also
covers the use of special studies and experimental testing and, for New Zealand, criteria for selection of annual probability of
exceedance. Information is given in appendices on selection of serviceability criteria.
Reprinted to incorporate Amendments 1:2002, 2:2003 and 4:2005
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2005 $29.95+GST (Members), $37.44+GST (Retail)

1170.0 - Supplement 1:2002 General principles - Commentary


Provides background material to the requirements of AS/NZS 1170.0, General principles. Clause by clause, it gives the origins of
requirements, departures from previous practice and explanations with examples to illustrate their application.
Supplement to AS/NZS 1170.0:2002. Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

1170.1:2002 Permanent, imposed and other actions


Provides design values of permanent, imposed and other actions to be used in the limit state design of structures and members. It is
intended to be used in conjunction with AS/NZS 1170.0. Other actions covered include liquid pressure, ground water, rain water
ponding and earth pressure.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2009
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2009 $29.95+GST (Members), $37.44+GST (Retail)

1170.1 - Supplement 1:2002 Permanent, imposed and other actions--Commentary (Supplement to AS/NZS 1170.1:2002)
Provides background material to the requirements of AS/NZS 1170.1. Clause by clause, it gives the origins of requirements,
departures from previous practice and explanations with examples to illustrate their application.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

1170.2:2002 Wind actions


Provides design values of wind actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0,
which gives the procedure for structural design. Wind speeds and direction factors are provided for a range of probabilities of
exceedance. Other factors cover the environment around the structure, the geometry of the structure and the dynamic interaction of
the structure with the wind.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 83 pages
Amendment 1, 2005 $39.95+GST (Members), $49.94+GST (Retail)

1170.2, Supplement 1:2002 Wind actions - Commentary (Supplement to AS/NZS 1170.2:2002)


Provides background material to the requirements of AS/NZS 1170.2, Wind actions. Clause by clause, it gives the origins of
requirements, departures from previous practice and explanations with examples to illustrate their application.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 50 pages

1170.3:2003 Snow and ice actions


Provides design values of snow and ice actions for use in structural design. It is intended to be used in conjunction with AS/NZS
1170.0,which gives the procedure for structural design. Snow regions are defined and ground snow loads are provided for a range
of annual probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and
the effect of winds on snow distribution.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

1170.3, Supplement 1:2003 Snow and ice actions - Commentary (Supplement to AS/NZS 1170.3:2003)
Provides background material to the requirements of AS/NZS 1170.3, Snow and ice actions. Clause by clause, it gives the origins of
requirements, departures from previous practice and explanations with examples to illustrate their applications. Common problems
for design are also discussed.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 68 pages

NZS 1170.5:2004 Earthquake actions - New Zealand


Provides procedures for the determination of earthquake actions on structures in New Zealand. It gives the requirements for
verification procedures, site hazard determination, the evaluation of structural characteristics, structural analysis for earthquake
action effects, the determination and limits for deformations and the seismic design of parts of structures. It is to be applied in
conjunction with AS/NZS 1170 parts 0, 1, 2 and 3. Appendices cover aspects of ultimate limit state design and the requirements for
material specific structural design standards that are able to be used in conjunction with NZS 1170.5.
$94.95+GST (Members), $118.69+GST (Retail), 80 pages

NZS 1170.5, Supplement 1:2004 Earthquake actions - New Zealand Commentary


Provides background to the various provisions in NZS 1170.5:2004, suggests approaches that may satisfy the intent of the Standard
and, if appropriate, describes differences between this and previous editions of the Standard. References are provided for further
reading and these are given at the end of each section of the Commentary.
$94.95+GST (Members), $118.69+GST (Retail), 76 pages

NZS/AS 1178-1986 (Withdrawn)

NZS/ISO 1180:1983 (Withdrawn)


NZS 1185:1953 (Withdrawn)

NZS 1187:1969 (Withdrawn)

NZS 1188:1954 (Superseded by NZS 4232)

AS/NZS 1194:- Winding wires

1194.1:1996 Enamelled round copper winding wires


Specifies dimensions and material requirements for conductor and enamel covering of round copper winding wires intended to be
used for windings of electrical equipment.
Reprinted to append Amendment 1:1997
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

1194.2:1996 Enamelled rectangular copper winding wires


Specifies dimensions and material requirements for conductor and enamel covering of rectangular copper winding wires intended to
be used for windings of electrical equipment.
Reprinted to append Amendment 1:1997
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

1194.3:1996 Enamelled round aluminium winding wires


Specifies dimensions and material requirements for conductor and enamel covering of round aluminium winding wires intended to be
used for windings of electrical equipment.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 18 pages

1194.4:1996 Enamelled rectangular aluminium winding wires


Specifies dimensions and material requirements for conductor and enamel covering of rectangular aluminium winding wires intended
to be used for windings of electrical equipment.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

1194.5:1996 Test methods


Specifies test methods for round and rectangular copper and aluminium winding wires in standards AS/NZS 1194 Parts 1 to 4, where
relevant.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

BS 1196:1989 (Withdrawn)

AS 1199:1988 (Withdrawn)

AS/NZS 1200:2000 Pressure equipment


Sets out basic requirements and good practice for the design, materials, manufacture, examination, testing, installation, conformity
assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers,
pressure vessels and pressure piping) but excluding gas cylinders. Includes detailed requirements for various pressure equipment by
direct reference to a range of Australian, New Zealand and other Standards.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 42 pages

NZS 1201:1970 (Withdrawn)

NZS 1212:1966 (Superseded by NZS/AS 3124)


NZS 1214:1969 (Superseded by NZS 5430:1983)

NZS 1215:1969 Specification for protective helmets for motor cyclists


Requirements for helmets for everyday use for motor cyclists on the roads. Manufacturing requirements are specified for the
construction, weight and finish of helmets and for the materials to be used for the shell and harness.
Reconfirmed in 1984; Reprinted to append Amendments 1 & 2
Cited in Traffic Regulations 1976
$34.95+GST (Members), $43.69+GST (Retail), 19 pages
Amendment 1, 1971 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1973 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1221:1997 Fire hose reels


Specifies requirements for design, construction and performance of fixed and swing arm type fire hose reels for use by one operator.
Reprinted to append Amendment 1:2003
Cited in BIA Approved Document C/AS1
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 30 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 1222:- Steel conductors and stays - Bare overhead

1222.1-1992 Galvanised (SC/GZ)


Specifies requirements, tests, sizes of zinc-coated steel wires and method of construction of standard conductors used for power
transmission purposes.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 12 pages

1222.2-1992 (Withdrawn)

NZS 1227: (Withdrawn)

NZS 1229:1966 (Withdrawn)

AS/NZS 1229:2002 Laundry troughs and tubs


Specifies requirements for materials and finish of laundry troughs and tubs. Only critical dimensions are specified. In New Zealand
substitute tub for trough.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

NZS/AS 1231-1985 Aluminium and aluminium alloys - Anodized coatings for architectural applications
Specifies requirements for clear and coloured anodized coatings on aluminium and aluminium alloys for external and internal
architectural applications. Coatings are classified in terms of coating thickness and guidance is given on the selection of coating
thickness. Appendices provide information on handling, temporary protection and maintenance of the coating.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 7 pages

AS/NZS 1249:2003 Children's nightwear and limited daywear having reduced fire hazard
Specifies the design performance and labelling requirements for four categories of children's sleepwear and limited daywear. It also
covers requirements for the labelling of paper patterns for these garments.
Reprinted to append New Zealand-only Amendment A:2008
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages
Amendment A, 2008 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS 1252:1996 High-strength steel bolts with associated nuts and washers for structural engineering
Specifies requirements for high strength steel bolts of property class 8.8 and steel nuts of property class 8 with ISO metric coarse
pitch series threads and associated washers in diameters from 16 mm to 36 mm inclusive, mainly intended for use in steel
structures.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages

NZS 1254:1966 (Withdrawn)

AS/NZS 1254:2002 PVC pipes and fittings for stormwater and surface water applications
Specifies requirements for PVC pipes and fittings for conveyance of stormwater or surface water. The Standard includes
requirements for both plain and structured wall pipes and fittings.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail)

NZS 1256:1955 (Withdrawn)

NZS 1257:1958 (Withdrawn)

AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
Specifies requirements for PVCU pipes and fittings for sewer, drain, waste and vent applications above-ground or below ground and
intended to be used where the pipeline is operating under gravity flow and the operating pressure is low.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 53 pages

NZS/AS 1264:1985 (Withdrawn)

AS/NZS 1268:1996 Equipment for checking pressure and inflation of tyres


Specifies minimum requirements for tyre pressure gauging equipment when used to measure, inflate, control or adjust the pressure
of tyres used on road vehicles.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

AS/NZS 1269:- Occupational noise management

1269.0:2005 Overview and general requirements


Provides an overview and general requirements for the occupational noise management series of Standards.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

1269.1:2005 Measurement and assessment of noise immission and exposure


Sets out requirements for, and provides guidance on, the types of noise assessments which may be necessary and suitable noise
measuring instruments to carry them out. The procedures for noise measurement are also included.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

1269.2:2005 Noise control management


Sets outs requirements and guidance on the management of noise control in occupational settings and applies to all types of
workplaces and to all types of sounds.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 64 pages

1269.3:2005 Hearing protector program


Specifies administrative responsibilities associated with a hearing protector program; the selection, use and maintenance of various
types of hearing protectors; and training and motivation in regard to hearing protector programs.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

1269.4:2005 Auditory assessment


Sets out procedures and requirements for air conduction pure tone audiometry without masking that are applicable to individuals
whose hearing sensitivity might be adversely affected by occupational noise exposure or ototoxic agents.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 56 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1270:2002 Acoustics - Hearing protectors


Specifies requirements for the design, material and performance of conventional hearing protectors. Also provides guidance on the
general requirements for specialist hearing protectors and procedures for the physical and acoustic testing of such devices.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 30 pages

NZS/AS 1275:1985 (Withdrawn)

NZS/ISO 1275:1984 (Withdrawn)

AS/NZS 1276:- Acoustics - Rating of sound insulation in buildings and of building elements

1276.1:1999 Airborne sound insulation


Provides a method whereby the frequency-dependent values of airborne sound insulation of building elements and in buildings can
be converted into a single number characterizing the acoustical performance. This Standard is identical with and has been
reproduced from ISO 717-1:1996.
Superseded by AS/NZS ISO 717.1:2004 but remains available.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

NZS 1277:1956 (Withdrawn)

AS/NZS 1279:1996 Copper refinery shapes


Specifies requirements for grades of copper supplied as refined shapes in the form of billets, cakes (vertically or continuously cast)
and cathodes. Appendices provide information on related designations and the relationship between resistivity and conductivity.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1284:- Electricity metering

1284.13:2002 In-service compliance testing


Provides requirements for an in-service compliance testing regime for electricity meters.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

NZS/ASTM F 1292(Int):2001 (Interim standard - Expired 7 July 2002.)

NZS 1297.2:1966 (Withdrawn)

NZS 1300:1965 (Superseded by NZS 6200)


AS/NZS 1301:- Methods of test for pulp and paper

1301.001s:2002 Methods of test for pulp and paper Method 001s: Basic density of pulpwood
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

1301.002s:2004 Preparation of wood samples for chemical analysis


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1301.P3s-1978 (Superseded by AS/NZS 1301.418s)

1301.004s:2007 Solubility of wood in boiling water


Sets out a method to be used to determine the proportion of material in wood which is soluble in boiling water.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1301.5s:1987 (Withdrawn)

1301.P6rp:1978 Halse lignin in wood and pulp


Describes the Halse procedure for determining the acid insoluble lignin in wood or pulp. The sample is treated with cold 38 percent
hydrochloric acid and cold concentrated sulphuric acid after first being treated to remove constituents which may interfere with the
lignin determination.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 2 pages

1301.010s:2007 Determination of moisture in wood chips


Prescribes the oven-drying method for the determination of moisture content of wood chips. This revision has been made to remove
the distillation method for determination of moisture content.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 12 pages

1301.P10rp:1986 (Superseded by AS/NZS 1301.010s:2002)

1301.11s:2005 Klason lignin in wood and pulp


Allows an alternative filtration apparatus and removes references to the use of benzene as a solvent.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

1301.012s:2003 Organic solvent extractives in wood, pulp and paper


This Standard prescribes the procedure to be used in determining organic solvent extractives in wood, pulp and paper.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 4 pages

1301.013rp:2007 Sampling of wood chips for testing


Provides guidelines and recommendations for the sampling of wood chips intended for the production of wood pulps.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 16 pages

1301.014rp:2002 Size classification of wood chips


This standard describes the apparatus and procedure for size classification of wood chips intended for the production of wood pulps.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1301.P200m:1977 Determination of moisture in pulp for calculation of the delivered mass of a shipment
Details the procedure for the determination of the moisture content of baled sheet pulp irrespective of the quantity of moisture
present. The method is based on the "Rules" accepted by the British and Scandinavian Association.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 8 pages

1301.201s:2002 Methods of test for pulp and paper Method 201s: Kappa number of pulp
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

1301.P201m:1986 (Superseded)

1301.P202s:1980 Laboratory processing of pulp - Lampen mill method


The Lampen mill is used as a laboratory beater for the processing of both hardwood and softwood pulps. This method sets out a
standard procedure for its use. Processing of the pulp in the mill is a preliminary step in the preparation of test sheets for testing the
physical properties of pulp.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 3 pages

1301.203s:2007 Forming handsheets for physical testing of pulp


Prescribes the procedure to be used for making handsheets from samples of pulp for subsequent physical testing according to
AS/NZS 1301.208s.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1301.204rp:2006 Estimation of dirt and shives in pulp


Provides for the estimation of visible dirt and shives in both fully bleached and unbleached pulps including pulp from waste paper, in
sheet form. It is also suitable for mechanical pulp.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

1301.206s:2002 Freeness of pulp


To revise the method to include data which has recently become available on the use of freeness correction factors.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1301.207s:2007 Determination of stock concentration


Specifies a method for determining the stock concentration of aqueous pulp suspensions. lt is used in laboratory procedures for the
determination of other pulp properties and is referred to in a range of other ISO Standards where pulp suspensions are involved.
Identical to and reproduced from ISO 4119:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1301.208s:2007 Physical testing of pulp handsheets


Prescribes the procedures to be used for the determination of certain physical properties of handsheets made from any kind of
papermaking pulp. For accurate and reproducible results the procedure for forming and conditioning the handsheets in AS/NZS
1301.203s is used.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 20 pages

1301.209s:2003 Laboratory processing of pulp - PFI mill method


This standard sets out a procedure for the use of the PFI mill. Information on care and maintenance of the mill is given in annex A.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

1301.210s:2002 Alkali solubility of pulp


This standard is identical to and reproduced from ISO 692:1982.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 3 pages

1301.214s:2007 Equipment for preparation of handsheets


Describes the equipment used for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical
tests on these sheets to assess the relevant properties of the pulp itself.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

1301.215s:2007 Removal of latency


Sets out a method for the removal of latency from all high yield pulps that have been produced at elevated temperature and cooled
before the concentration is reduced. The method involves disintegration at low consistency and elevated temperature followed by
rapid cooling to an even lower consistency. To ensure rapid cooling, the use of ice is recommended.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
1301.400s:1998 Tearing resistance of paper
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

1301.402rp:2005 Statistical monitoring of test systems


Clarifies the objectives and the procedures for monitoring and controlling either a single test system or two or more test systems
which are to be maintained in agreement with each other.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

1301.403s:2006 Bursting strength of paper


Prescribes the procedure to be used for the determination of bursting strength of paper by means of a burst tester. It is applicable to
paper sheet materials which have a mean bursting strength less than 1100 kPa.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1301.404s:1998 Tensile strength of paper and board (constant rate of loading method)
This Standard is identical with and has been reproduced from ISO 1924 - 1:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1301.405s:2004 Grammage of non-creped paper and board


Identical to and reproduced from ISO 536:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 4 pages

1301.P406m:1986 Bending quality of paperboard


Gives a measure of the bending quality of paperboards; the results obtained give an indication of the creasing requirements of a
paperboard during its conversion. The severity of creasing required to obtain a rupture-free fold is taken as a measure of bending
quality.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 3 pages

1301.407s:1997 Ring crush test


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1301.411s:2004 Water absorptiveness of paper and paperboard (Cobb test)


Provides a method for those concerned with determining the water absorptiveness of sized paper and board, including corrugated
fibreboard, under standard.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 4 pages

1301.414s:2006 Conditioning of paper for testing


Describes the procedure for general use for the conditioning of paper. The term ‘paper’ is used in this standard in the general sense
to include paperboard and corrugated fibreboard, except when the specific use of the term is apparent.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1301.415s:2008 Standard atmosphere for testing paper and board and procedure for monitoring the
atmosphere
Specifies the apparatus and procedure to be used for measuring temperature and relative humidity to determine whether a test
atmosphere conforms to the limits described.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1301.417s:1992 Sampling paper, board and pulp for testing


Specifies a method of obtaining a representative sample of a lot of paper, board or pulps for test purposes.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

1301.418s:1994 Ash content of wood, pulp, paper and board


Prescribes procedures for the determination of ash content of wood, pulp, paper and board. The revision includes a change to the
ashing temperature. There are optional temperatures for paper and board, and the selection of temperature will depend on the
purpose of the test. It is common practice to incorporate calcium carbonate into certain papers and boards. A temperature of 900
degrees C will decompose calcium carbonate to calcium oxide, a temperature of 520 degrees C will leave calcium carbonate
undecomposed. The user will choose one of these temperatures depending on which form of calcium is required in the residue. The
ashing temperature for wood and pulp is now 925 degrees C plus or minus 25 degrees C to bring it into line with the high
temperature ashing of paper.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1301.419s:2004 Water vapour transmission rate of paper


Identical to and reproduced from ISO 2528:1995.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 11 pages

1301.420s:2006 Gurley air permeance of paper


Specifies the Gurley method of determining the air permeance of paper and board. It is applicable to papers and boards which have
air permeances between 0.1 µm/(Pa.s) and 100 µm/(Pa.s). Based on ISO 5636-5:2003 with national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

1301.421:2008 Determination of pH of aqueous extracts - Cold extraction method


Specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of
paper, board or pulp.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1301.422s:2007 Determination of the pH value of aqueous extracts of paper, board and pulp - Hot
extraction method
Method applies to an extract of the whole paper or board. Surface-treated papers or boards may yield quite a different pH for an
extract of the surface layer from that of the whole paper or board.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 12 pages

1301.423:2008 Folding strength of paper - Kohler-Molin method


Prescribes the procedure to be used to determine the folding strength of paper, measured as either folding endurance or the mean of
the number of double folds, using a Kohler-Molin folding strength tester.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

1301.424s:2006 Determination of titanium dioxide in paper, paperboard, pigments and fillers


Describes procedures for qualitative and quantitative determinations of titanium dioxide in paper, paperboard, pigments and fillers.
The method is not suitable for determination of total titanium because the solution procedure does not dissolve all titanium
compounds.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

1301.P425ts:1973 (Withdrawn)

1301.426s:1994 Determination of thickness and apparent bulk density or apparent sheet density
Specifies two methods of measuring the thickness of paper and board and of calculating the apparent sheet density from the
thickness determinations. This Standard is based on ISO 534:1988 and incorporates amendments which provide that the ISO
preferred pressure between the faces be mandatory and allow the Standard to be applied to corrugated fibreboard.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1301.427s-1988 (Superseded by AS/NZS 1301.426s)

1301.P428rp-1983 Cracking resistance of paperboard


Specifies the procedures to be used when measuring, by means of a pendulum-type tensile testing machine, the "looped breaking
load" and the "breaking load" of the paperboard, and for calculating the cracking resistance from these results.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 3 pages

1301.429s:2002 Flat crush resistance of corrugated board


Provides a description of the procedure to be used to determine the flat crush resistance of single wall corrugated board.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

1301.430s:2004 Liner adhesion of corrugated board


This standard sets out a method to determine the liner adhesion of corrugated board.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

1301.431rp:2006 Taber bending resistance of paper and paperboard


Prescribes the procedure for measuring the bending resistance of paper or paperboard using the Taber stiffness tester. Although this
instrument is called a stiffness tester, it cannot be used to measure stiffness because most paper and paperboard materials, when
tested according to this method, are bent beyond their elastic limit. Bending resistance is defined as the force required to bend,
under specified conditions, a rectangular test piece of the paper or paperboard which is clamped at one end. The method is
applicable to paper and paperboard having a bending resistance value in the range 10 to 9000 mN.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

1301.434s:1997 Crush resistance of corrugating medium


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1301.436s:2005 Measurement of diffuse reflectance factor


Specifies the equipment and describes the general procedure for measuring diffuse reflectance factor as required for the evaluation
of the physical correlates of specific appearance properties of pulp, paper and paperboard. Diffuse reflectance factor (R) is the ratio,
expressed as a percentage, of the radiant (luminous) flux reflected by a body within a specified cone, to that reflected by the perfect
reflecting diffuser under the same conditions of viewing and diffuse illumination.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

1301.437s:2007 Tensile strength of wetted paper and paperboard


Specifies methods for the determination of the wet strength of paper and paperboard by measuring its tensile strength after it has
been immersed in water for a specified period.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1301.438s:1997 Bursting strength of board


Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

1301.439s:2007 Bendtsen roughness of paper and paperboard


Specifies a method for the determination of the roughness of paper and board using the Bendtsen apparatus. Identical to ISO
8791.2:1990.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1301.440s-1991 Bendsten air permeance of paper and board


Sets out the procedure for measuring the air permeance of paper and board by means of the Bendsten air permeance tester.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 7 pages

1301.441s:1998 Sheffield roughness of paper and board


Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

1301.442s:1998 Water absorption of solid fibreboard (total immersion)


This Standard is technically equivalent to and has been reproduced from ISO 5637:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1301.443s:2005 Boiling water resistance of paperboard


Describes the procedure to be used when measuring the boiling water resistance of paperboard. It is applicable in particular to the
testing of plaster linerboard for use in the manufacture of plasterboard and is derived from the plasterboard manufacturing process.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
1301.444s:2004 Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxed edge
method)
The objective of this Standard is to provide a method for those concerned with determining the edgewise crush resistance of
corrugated fibreboard. A modified adoption of ISO 3037:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 3 pages

1301.445s:2006 Hardness of corrugated board


Prescribes the procedure to measure the hardness of corrugated board.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1301.446s:2005 Measurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard
Sets out a method to measure the diffuse blue reflectance factor (brightness) of pulp, paper and paperboard.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

1301.447s:1998 Sheffield air permeance of paper and board


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

1301.448s:2007 Tensile strength of paper and paperboard (constant rate of elongation method)
Describes a method for measuring the tensile strength of paper at constant rate of elongation. The tensile force applied to the test
piece and its elongation are measured continuously during the test and the results are used to determine tensile energy absorption.
Stretch at break may also be determined if required.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1301.449s:1997 Description of crush testing equipment


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1301.450rp:2006 Compression strength of paper and board - Short span test


Specifies a method for the determination of the compressive strength in the machine and cross directions of paper and board using a
short span compression tester. Identical to and reproduced from ISO 9895:1989.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1301.451rp:2007 Fibre furnish analysis


Prescribes a recommended practice for identifying the types of fibre present in a sample of pulp, paper or paperboard and for
determining the proportions by mass of each fibre type.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1301.452rp:2006 Determination of weight factors by the comparison method


Specifies two methods for determining the weight factor of fibres used in the fibre furnish analysis of paper, board and pulp.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

1301.453s:1998 Bending resistance of paper and board - Constant rate of deflection


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1301.454s:2006 Determination of opacity (paper backing) - Diffuse reflectance method


Prescribes the method for determining the opacity (paper backing) of paper. Opacity (paper backing) is the property that governs the
extent to which one sheet of paper visually obscures printed matter on underlying sheets of paper.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1301.455s:1993 Colour measurement with a diff/0 degrees geometry tristimulus reflectometer


Specifies method for measuring colour of paper and board by diffuse reflectance method. Confined to non-fluorescent papers and
boards.
Technically equivalent to ISO/DP 5631.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1301.456s:2006 Determination of conductivity of aqueous extracts of paper, board and pulps


Specifies a method for the determination of the conductivity of aqueous extracts of paper, board or pulp, these extracts having been
prepared by a hot or a cold method.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

1301.457s:2006 Determination of moisture content in paper, board and pulps


Applies to paper products and pulps that do not contain any appreciable quantity of material other than water which will escape from
the paper at the temperature specified for the test.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

1301.458rp:2004 Glue bond strength of wetted corrugated fibreboard


Provides a means of measuring the strength after wetting of the glue bonds of corrugated fibreboard.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

1301.459rp:2006 Zero-span wet tensile strength of pulp


Provides a method to assess the tensile strength of pulp fibres while minimizing the impact of fibre network and fibre bonding
interactions upon the measurement. Based on ISO 15361:2000 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

1301.460s:2007 Statistical concepts used in pulp and paper testing


Provides procedures and concepts to be used in the calculation and interpretation of test results obtained by methods described in
other parts of AS/NZS 1301.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

1301.461rp:2002 Scuffing resistance of linerboard


Sets out a method to determine the scuffing resistance of linerboard.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1301.462s:2005 Measurement of diffuse blue reflectance factor (ISO brightness) of pulp, paper and
paperboard
Specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps, papers and boards. Is identical with
and has been reproduced from ISO 2470:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

1301.464s:2005 Equipment for measurement of diffuse reflectance factor


Specifies the equipment for measuring the diffuse reflectance factor of pulp, paper and board and the procedures for calibrating that
equipment. Is identical with and has been reproduced from ISO 2469:1994.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

1301.466s:2005 Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor
(ISO brightness)
Specifies two procedures for the preparation of laboratory sheets prior to measuring the diffuse blue reflectance factor (ISO
brightness). Is identical with and has been reproduced from ISO 3688:1999.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1301.800s:2006 Compression resistance of fibreboard boxes (cases)


Prescribes the apparatus and test procedure to be followed when assessing the compression resistance of unfilled fibreboard cases
in any desired direction. The testing of filled cases is prescribed in AS 2582.3 - 2003. In New Zealand the term ‘case’ is used instead
of ‘box’.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

NZS 1302:1962 (Superseded by NZS 6317)


AS/NZS 1314:2003 Prestressing anchorages
This Standard covers the design, manufacture and methods for testing prototypes of prestressing anchorages, for establishing
performance for use in prestressed concrete.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 23 pages

NZS/AS 1319-1994 Safety signs for the occupational environment


Provides for signs using a system of coded shapes and colours with symbols which pictorially describe hazards (i.e. signs for
conveying safety instructions without relying on any text message), and signs with text (words and numerals) messages (including
recommendations for multi-lingual signs); accident prevention tags are also covered. The signs are classified as regulatory; caution
(warning); emergency-related information (including fire signs). All standard symbolic (pictorial) signs are reproduced in colour and
examples are included, also in colour, of text-type signs. Photometric and colorimetric properties of the sign materials are dealt with,
and recommendations on styles and sizes of sign lettering are included.
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 40 pages

AS/NZS 1328:- Glued laminated structural timber

1328.1:1998 Performance requirements and minimum production requirements


Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination
joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress
grade. Methods of test are given to measure the strength of a glued joint.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

1328.2:1998 Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued
laminated structural timber
Intended for use in conjunction with AS/NZS 1328.1, this Standard provides detailed guidance for production of gluelam. A set of
stress grades is given for design purposes to simplify the use and installation of graded material. Guidelines are also provided for
quality control, third party certification and for establishing structural properties.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

NZS 1331:1962 (Withdrawn)

AS/NZS 1336:1997 Recommended practices for occupational eye protection


Sets recommended practices for the protection of the eyes of persons at work against hazards such as flying particles, dust,
splashing materials and molten metals, harmful gases, vapours and aerosols, high-intensity radiation generated during welding
operations and furnace work. Guidance is given on the selection of eye protectors appropriate to the use of particular lasers.
Additional guidance is provided for manufacturers and dispensers of prescription lenses on the requirements for production of
prescription personal eye protectors.
Reprinted to append Amendment 1:1997
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1337:- Personal eye-protection

AS/NZS 1337:1992 Eye protectors for industrial applications


Specifies minimum requirements for eye protectors and associated lenses designed to provide protection for peoples` eyes in the
industrial environment. Types of protection offered are for molten metal, airborne particles and fragments, harmful gases, vapours
and aerosols, and sunglare and optical radiation in the natural environment. Markings for lenses to indicate the type of protection
offered are also included.
Reprinted to append Amendments 1 & 2
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 40 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1997 $29.95+GST (Members), $37.44+GST (Retail)

1337.4:2004 Filters and eye-protectors against laser radiation (laser eye-protectors)


Specifies performance requirements, test methods, marking requirements, selection and use of personal eye-protectors against laser
radiation in the spectral range 180 nm to 1000 micrometre. Identical with and reproduced from EN 207:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

1337.5:2004 Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-
protectors)
To provide regulatory authorities, manufacturers, importers, distributors, retailers, employers, employees and other users with
comprehensive requirements for laser adjustment filters and eye-protectors in order to minimize safety risks and occupational
hazards associated with laser adjustment in Australia and New Zealand. Identical with and reproduced from EN 208:1999.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

1337.6:2007 Prescription eye protectors against low and medium impact


Specifies minimum requirements for eye protectors fitted with prescription lenses intended to provide low or medium impact eye
protection from flying particles and fragments in occupational situations. It does not apply to eye protectors in which the prescription
lenses are fitted behind the plano protective lenses.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1338:- Filters for eye protectors

1338.1:1992 Filters for protection against radiation generated in welding and allied operations
Specifies requirements for filters used in eye protection against high intensity radiation emitted during welding and allied operations
including electrically controlled filters. A classification system is provided together with transmittance requirements for such filters.
Reprinted to append Amendment 1:1994
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)

1338.2:1992 Filters for protection against ultraviolet radiation


Specifies requirements for filters used in eye protection against ultraviolet radiation. A classification system of code and shade
numbers is provided, together with transmittance requirements for such filters.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1338.3:1992 Filters for protection against infra-red radiation


Specifies requirements for filters used in eye protection against infra-red radiation. A classification system of code and shade
numbers is provided, together with transmittance requirements for such filters.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 1340:1970 (Superseded by NZS 4222)

BS 1347:1986 (Withdrawn)

NZS/AS 1349:1986 (Withdrawn)

AS/NZS 1359:- Rotating electrical machines - General requirements

1359.5:2004 Three-phase cage induction motors - High efficiency and minimum energy performance
standards requirements
Specifies revised minimum energy and high efficiency requirements for three-phase cage induction motors to be introduced on 1
April 2006 in Australia and in New Zealand on a date to be gazetted.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

1359.102.3:2000 Methods for determining losses and efficiency - Three-phase cage induction motors
Specifies internationally aligned test methods for determining losses and efficiency of three-phase cage induction motors. This
Standard prescribes two test methods: Method 1, involving torque measurements applicable to motors of all kW ratings and Method
2, without torque measurements, applicable to motors of up to 200 kW rating.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 1362:1998 Wool - Calculation of IWTO combined certificates for deliveries of raw wool
Sets out calculation procedures for combining the wool base, vegetable matter, commercial yields and mean fibre diameter test
results of component lots in a delivery of raw wool, for which the issue of one overall certificate is required. Specifies the precision of
the test results reported on the certificate. It is identical with and has been reproduced from IWTO-31-96.
Reprinted to append Amendments 1 & 2
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1363:- Wool - Grab sampling - Greasy wool

1363.1:1996 Method for grab sampling greasy wool from bales


Sets out a method of obtaining representative samples of greasy wool from conventional bales. This standard is identical with and
reproduced from IWTO-38-91.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1997 $29.95+GST (Members), $37.44+GST (Retail)

1363.2(Int):1996 (Withdrawn)

AS/NZS 1365:1996 Tolerances for flat-rolled steel products


Specifies dimensional tolerances for flat-rolled steels in the form of wide slabs, plate and floorplate rolled on a reversing mill, hot-
rolled plate, floorplate, sheet and strip rolled on a continuous mill and cold-rolled sheet and strip. It does not apply to stainless, high
alloy and quenched and tempered steels. Two classes of tolerance (A and B) are specified; Class B being the more stringent.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS/AS 1366.3-1982 (Withdrawn)

AS/NZS 1367:2007 Coaxial cable and optical fibre systems or the RF distribution of analog and digital
television and sound signals in single and multiple dwelling installations
Provides specifications and requirements for the cabling of a range of premises and buildings generally referred to in this Standard
as dwellings, for distribution of analog and digital services such as free-to-air TV and sound, subscription or pay TV, or in-house
video systems via RF distribution. Such distributed services may include an interactive path.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 160 pages

AS/NZS 1376:1996 Conversion factors


Provides basic conversion information for use in converting from imperial and other non-SI units to the International System of Units
(SI).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages
NZS 1379:1960 (Superseded by AS/NZS 3108)

AS/NZS 1385:2007 Textile floor coverings - Metric units and commercial tolerances for measurement
Sets out the basic metric units and commercial tolerances for textile floor coverings.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 8 pages

NZS/BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel
tubes suitable for welding or for screwing to BS 21 pipe threads
Applicable to tubes of nominal size DN8 to DN150 in light, medium and heavy thicknesses.
Reprinted incorporating Amendment 1
Cited in BIA Approved Documents G10/AS1, G12/AS1 and G14/VM1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages
Amendment 1, 1989

AS/NZS 1388:1994 Guidelines for technical information for building and construction products
Provides producers of literature for the building and construction industries with guidelines for presenting technical information so
that the information can be in a clear and structured form.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

AS/NZS 1389:1997 Acidic detergents for use in the dairying industry


Specifies the requirements and the type of cleaning operations for which acidic detergents are useful, and specifies criteria for
available acid content, degree of foaming and other physical properties. Appendices describe methods for assessing the acid
content, corrosion potential and degree of foaming.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1390:1997 Cup head bolts with ISO metric coarse pitch threads
Specifies the dimensional and marking requirements for cup head bolts with ISO metric coarse pitch threads in diameters from 5 mm
to 24 mm inclusive, and the material requirements for steel cup head bolts of property class 4.6.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

AS/NZS 1393:1996 Coach screws - Metric series with ISO hexagon heads
Specifies the dimensions and marking requirements for coach screws for use in timber structures in ISO preferred series diameters
from 6 mm to 20 mm inclusive and lengths up to 200 mm, and with ISO hexagon heads and either full body or reduced diameter
(scant) shanks, and the material requirements for steel coach screws.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

NZS/AS 1397:1993 (Withdrawn)

NZS/BS 1400:1985 (Withdrawn)

AS/NZS 1400:1997 Heavy-duty alkaline detergents for `in-place` cleaning in dairy factories
Specifies requirements for solubility in water, alkalinity, degree of foaming, sequestering ability and corrosion potential of detergents
of low-, medium- or high-foaming type. Appendices provide methods for determining corrosion potential and foam level.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
NZS/SAE J1401:1994 Road vehicle - Hydraulic brake hose assemblies for use with nonpetroleum-base hydraulic
fluids
Specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a
road vehicle. It also specifies the methods used for identification of the hose manufacturer. It applies to brake hose assemblies
made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with
nonpetroleum-base brake fluids as specified in SAE J1703 and SAE J1705.
Adopted Standard
$141.50+GST (Members), $176.88+GST (Retail), 18 pages

NZS/SAE J1402:1985 Automotive air brake hose and hose assemblies


Covers minimum requirements for air brake hose assemblies made from reinforced elastomeric hose and suitable fittings for use in
automotive air brake systems including flexible connections from frame to axle, tractor to trailer, trailer to trailer and other unshielded
air lines that are exposed to potential pull or impact. This hose is not to be used where temperatures, external or internal, fall outside
the range of -40 degrees F to +200 degrees F (-40 degrees C to +93 degrees C).
Adopted Standard
$68.51+GST (Members), $85.64+GST (Retail), 4 pages

NZS/SAE J1403:1989 Vacuum brake hose


Vacuum brake hose is intended for use in the power braking systems of vehicles or as connections on transmission lines in
combinations of vehicles or systems thereof. For the purpose of clearly identifying the scopes and simplification of the specification,
the vacuum brake hose specification is divided into two types with two classes as follows: Heavy-Wall Type H, Class A and B and
Light-Wall Type L, Class A and B.
Adopted Standard
$68.51+GST (Members), $85.64+GST (Retail), 8 pages

AS/NZS 1418:- Cranes (including hoists and winches)

1418.9:1996 Vehicle hoists


Specifies requirements for vehicle hoists as defined in AS 2549. It applies to wheel-supporting, axle-supporting and frame-
supporting vehicle hoists and their accessories. The Standard does not apply to vehicle jacks (see AS/NZS 2693), trolley jacks
(AS/NZS 2615), car stackers and vehicle roll-over equipment. Sections are included on their design, installation, testing and
operation and maintenance requirements. Appendices provide guidance on deflection limits, hazards and illustrations of typical
vehicle hoists. It is intended for use with AS 1418.1 and AS/NZS 2550.9 which provide guidance on the safe use of vehicle hoists.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 1420:1996 (Withdrawn)

AS/NZS 1421:1996 ISO metric hexagon socket set screws


Specifies the dimensional requirements for hexagon socket set screws with ISO metric coarse pitch series threads of diameters from
1.6 mm to 24 mm and with flat, cup, cone or dog points, and the material requirements for steel hexagon socket set screws of
property class 45H.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 1425:2007 LP Gas fuel systems for vehicle engines


Specifies requirements for liquefied petroleum gas (LP Gas) fuel systems for engines mounted on motor vehicles, either for the
propulsion of the vehicles or for driving some auxiliary function, e.g. a mixer or a pump.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages

AS/NZS 1427:1996 ISO metric machine screws


Specifies the dimensional requirements for machine screws with ISO metric coarse pitch series screw threads of diameters from 1.6
mm to 10 mm and with countersunk, raised countersunk, pan, cheese, mushroom, hexagon and hexagon washer head styles and
the material requirements for steel machine screws of property class 4.8.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1428:- Design for access and mobility

1428.4:2002 Tactile indicators


Provides requirements for the design and application of tactile ground surface indicators for new buildings to ensure safe and
dignified mobility of people who are blind or vision-impaired.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 57 pages

AS/NZS 1429:- Electric cables - Polymeric insulated

1429.1:2006 For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
Specifies the requirements for cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR) insulated, individually
screened single-core and three-core cables for fixed installations for electricity supply, with or without armour.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

1429.2:1998 For working voltages above 19/33 (36) kV up to and including 76/132 (145) kV
Specifies requirements for the construction and testing of single-core cross-linked polyethylene (XLPE) insulated cables for fixed
installations for electricity supply.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

NZS/AS 1431 (Withdrawn)

NZS/BS 1435.1-1987 (Withdrawn)

NZS/ISO 1436:1991 (Withdrawn)

NZS/BS 1449: (Withdrawn)

NZS/AS 1453-1973 (Withdrawn)

AS/NZS 1462 Methods of test for plastics pipes and fittings

AS/NZS 1462.1:2006 Method for determining the dimensions of pipes and fittings
Sets out a method for determining the dimensions of plastics pipes and fittings, i.e. outside diameter, wall thickness, length,
squareness of pipe ends, internal length, mouth diameter and root diameter of sockets.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 1462.2:2006 Method for determining the flattening properties of plastics pipes and fittings
Sets out a method for determining the flattening properties of plastics pipes and fittings.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1462.3:1998 Method for determining the impact characteristics of pipes


Specifies a method for determining the impact characteristics of plastic pipes when subjected to multiple impacts at 20 degrees C or
0 degrees C, as appropriate.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 1462.4:2002 Method for determining reversion of plastic pipes


Sets out the method for determining the degree of residual extrusion stress in plastic pipes by immersion in a heat transfer medium
or exposure in a hot air oven. Temperatures of test, times of immersion/exposure and specifications for degree of residual stress
shall be as specified in the relevant product standard.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

AS/NZS 1462.5:2002 Vicat softening temperature


Provides a method of test to determine the Vicat softening temperature of thermoplastics pipes and fittings. It is applicable to
thermoplastics materials for which it is possible to measure the temperature at which their rate of softening becomes rapid.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

AS/NZS 1462.6:2008 Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure -
Resistance to internal pressure
Providesd requirements for the determination of the resistance to pressure of pipes, fittings or assemblies. Describes the method for
pressurising the different test pieces considered as well as the testing procedure and the test report.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

AS/NZS 1462.8:2008 Method of testing the leaktightness of assemblies


Specifies a method for testing the leaktightness of assemblies of plastics pipes and fittings with elastomeric sealing-ring socket joints
or inspection openings, which may be subjected to diametric distortion and /or angular deflection.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

AS/NZS 1462.10:1998 Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-
pressure applications
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 1462.11:1996 Method 11: Method for high temperature stress-relief testing of fittings
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 1462.13:2006 Method for the determination of elastomeric seal joint contact width and pressure
Sets out a procedure for determining the contact width and contact pressure profile of an elastomeric seal joint. It allows for both
spigot-mounted and socket-mounted elastomeric seal joints.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1462.14:1996 Method 14: Method for determination of the light transmission of pipe
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 1462.15:1996 Method 15: Method for determination of vinyl chloride monomer content
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 1462.16:2006 Method for high temperature testing of pipe


Sets out the procedure for testing the matrix of PVC and ABS pipes by using high temperatures.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1462.19:2006 C-ring test for fracture toughness of PVC pipes


Specifies a method for establishing the minimum fracture toughness of unplasticized (vinyl chloride) (PVC-U) pressure pipes.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 16 pages

AS/NZS 1462.20:1996 Method 20: Method for the determination of long-term failure stress on PVC moulding
compounds
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 1462.21:1997 Method 21: Method for determination of bond strength


This Method sets out a procedure for determining the bond strength between the inner and outer walls of hollow profile structured
wall pipe.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
AS/NZS 1462.22:1997 Method 22: Method for determination of pipe stiffness
This Method sets out a procedure for determining the pipe stiffness of plastics pipes with structured walls.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 1462.23:2006 Method for determination of ring flexibility


Sets out a procedure for determining the ring flexibility of plastics pipes with structured walls.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 1462.25:2005 Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant


ligament-stress (NCLS) method
Sets out a method to determine the susceptibility of polyethylene resins to slow-crack-growth under a constant ligament-stress in an
accelerating environment.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 8 pages

AS/NZS 1462.26:2003 Method 26: Determination of weathering resistance of plastics pipes for external storage
This Standard sets out a method for determining the weathering resistance, including resistance to ultraviolet radiation of plastics
pipes and fittings.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1462.27:2003 Method 27: Determination of toluene extract of carbon black


This Standard sets out a method for determining the toluene extract of carbon black.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 1462.28:2003 Method 28: Method for the assessment of the degree of pigment or carbon black
dispersion in polyolefin pipes, fittings and compounds
This Standard describes a method with two procedures for the assessment of pigment or carbon black particle and agglomerate size
and degree of dispersion in polyolefin pipes, fittings and compounds. The method is applicable to polyolefin pipes and fittings, as well
as raw material in pellet form, with the choice of procedure to be determined by the referring specification. The method is applicable
to carbon black pigmented polyolefin pipes, fittings and compounds with a carbon black content of less than 3%. Identical to and
reproduced from ISO 18553:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 9 pages

AS/NZS 1462.29:2006 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength
of thermoplastics materials in pipe form by extrapolation
Sets out a method for estimating the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation. Based on
ISO 9080:2003 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 1477:2006 PVC pipes and fittings for pressure applications


Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are
not exposed to direct sunlight.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

AS/NZS 1486:1993 Information technology - Programming languages - Fortran 90


Specifies the form and establishes the interpretation of programs in the Fortran language and consists of the specification of the
language. This standard is identical with and reproduced from ISO/IEC 1539:1991.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 369 pages

NZS/ASTM F 1487(Int):2001 (Interim standard - Expired 7 July 2002)


AS/NZS 1491:1996 Finger jointed structural timber
Specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger
joints in structural timber members. Requirements are given for timber, adhesive, moisture content, cutting, bonding and
preservative treatments and flame retardant treatments. This standard is only applicable to finger joints between timber members of
the same species type. Based on and technically equivalent to BS EN 385:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

NZS/ISO 1496.1-1990 (Superseded by AS/NZS 3711.4)

NZS/ISO 1496.2-1988 (Superseded by AS/NZS 3711.5)

NZS/ISO 1496.5-1977 (Superseded by AS/NZS 3711.8)

NZS/ISO 1496.6c-1977 (Superseded by AS/NZS 3711.8)

NZS 1499:1965 (Replaced by AS/NZS 4476:1997, but not officially superseded.)

NZS/BS 1501: (Withdrawn)

NZS/BS 1502:1982 (Withdrawn)

NZS/BS 1503:1989 (Withdrawn)

NZS/BS 1504:1976 (Withdrawn)

AS/NZS 1516:1994 The cement mortar lining of pipelines in situ


Specifies the requirements for the cement mortar lining of pipelines in situ, by spray application. The lined pipelines are intended for
the conveyance of wastewater or water intended for human consumption.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

AS/NZS 1518:2002 External extruded high-density-polyethylene coating system for pipes


Provides requirements for use by purchasers and manufacturers of steel pipeline systems, for external protection of pipeline systems
against corrosion, by a method of annular or laterally extruded layer of high-density polyethylene over a sealant layer. Operating
temperatures are in the range of -20 degrees C to 55 degrees C.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1519:2006 Information and documentation - International Standard Book Number (ISBN)
Establishes the specifications for the International Standard Book Number (ISBN) as a unique international identification system for
each product form or edition of a monographic publication published or produced by a specific publisher. Identical to and reproduced
from ISO 2108:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages

NZS/BS 1521:1972 Specification for waterproof building papers


Quality, workmanship, dimensions, performance. Class A for prevention of draughts or ingress of water into wall or pitched roof
structures. Class B for temporary purposes such as protection of concrete during curing.
Adopted Standard
$121.21+GST (Members), $151.51+GST (Retail), 12 pages
Amendment 1, 1981 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 1530:- Methods for fire tests on building materials, components and structures

1530.1-1994 Combustibility test for materials


Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating
the potential fire hazard of building products. This fire test was developed for use by those responsible for selection of construction
materials which, although not completely inert, produce only a limited amount of heat and flame when exposed to temperatures of
approximately 750oC. This revision aligns the test method more closely with ISO 1182:1990 but specifies combustibility criteria
necessary for regulatory purposes.
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 21 pages

1530.2-1993 Test for flammability of materials


Describes procedures for preparing and determining flammability index of thin sheet or woven materials of pliable nature which are
combustible and do not melt readily or shrink away from an igniting flame. The index is determined according to a speed factor, heat
factor and spread factor.
Reprinted to incorporate Amendment 1:1993
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 12 pages
Amendment 1, 1993 $29.95+GST (Members), $37.44+GST (Retail)

1530.3:1999 Simultaneous determination of ignitability, flame propagation, heat release and smoke
release
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and
tendency to produce smoke. Apparatus, test procedure, indices for grading and mounting procedures for specimen materials are
provided.
Cited in BIA Approved Document C/AS1
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 30 pages

1530.4-1990 (Withdrawn)

1530.7:1998 Smoke control door and shutter assemblies - Ambient and medium temperature leakage
test procedure
Sets out test procedures for a method of test for determining the smoke leakage through doors and shutters. This Standard is based
on but not equivalent to ISO/CD 5925-1.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

NZS/AS 1531-1991 Conductors - Bare overhead - Aluminium and aluminium alloy


Sets out the requirements and tests necessary for homogeneous bare electrical conductors for overhead power transmission and
constructed of all aluminium and aluminium alloy wires. A range of wire sizes, 2.50 mm to 4.75 mm, and their properties are
provided.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 12 pages

NZS 1545:1960 (Withdrawn)

AS/NZS 1546:- On-site domestic wastewater treatment units

1546.1:2008 Septic tanks


Covers the manufacture of septic tanks and their associated fittings for the treatment of domestic wastewater only.
Joint Australian/New Zealand Standard
$99.95+GST (Members), $124.94+GST (Retail), 73 pages

1546.2:2008 Waterless composting toilets


Covers the requirements of waterless composting toilets which are intended primarily as stand-alone units for residential use but
may be suitable for non-residential applications.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 51 pages

1546.3:2008 Aerated wastewater treatment systems


Sets out performance requirements, design requirements, means of compliance, and specifications for testing aerated wastewater
treatment systems (AWTS) and associated fittings. Also provides guidance on installation, operation, and maintenance
requirements.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 31 pages

AS/NZS 1547:2000 On-site domestic wastewater management


Specifies requirements for on-site domestic wastewater systems including both primary and secondary wastewater treatment units
and associated land-application systems. The Standard gives specific details for septic tanks for domestic all-waste, blackwater and
greywater; and specific details for land-application and absorption systems, including conventional trenches and beds, evapo-
transpiration systems, mounds and irrigation areas.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 168 pages

AS/NZS 1553:- Covered electrodes for welding

1553.1:1995 (Superseded by AS/NZS 4855:2007)

1553.2:1999 (Superseded by AS/NZS 4856:2026 and AS/NZS 4857:2006)

1553.3:1996 (Superseded by AS/NZS 4854:2006)

AS/NZS 1554:- Structural steel welding

1554.1:2004 Welding of steel structures


Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow
sections and built-up sections, or castings and forgings. It is limited to the welding of steel parent material with a specified minimum
yield strength not exceeding 500 MPa. It does not apply to oxyacetylene, friction, thermoset or resistance welding processes or to
the welding of pressure vessels or pressure piping.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 97 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

1554.2:2003 Stud welding (steel studs to steel)


Specifies requirements for the stud welding of steel studs to steel elements, such steel studs being used for the attachment of
members and connection devices to concrete, and for fastening of other members and appurtenances. This Standard does not apply
to the welding of studs to pressure vessels.
Reprinted to incorporate Amendment 1:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

1554.3:2008 Welding of reinforcing steel


Specifies requirements for the welding of reinforcing steel used in concrete structures that are designed and constructed in
accordance with AS 3600 or NZS 3101.1, as well as other Standards that may be appropriate. It also applies to the welding of steel
connection devices, inserts, anchors and anchor details, including prefabricated assemblies required in reinforced and precast
concrete constructions.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 69 pages

1554.4:2004 Welding of high strength quenched and tempered steels


Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow
sections and built-up sections, or castings and forgings, by the MMAW, SAW, GMAW, GTAW or TIG, FCAW, ESW and EGW
processes. The Standard is limited to the welding of quenched and tempered steel parent material.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 86 pages

1554.5:2004 Welding of steel structures subject to high levels of loading


Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow
sections and built-up sections, or castings and forgings, by the MMAW, SAW, GMAW, GTAW or TIG, FCAW, ESW and EGW
processes. The Standard is limited to the welding of steel parent material with a specified minimum yield strength not exceeding 500
MPa.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 77 pages

1554.6:1994 Welding stainless steels for structural purposes


Provides rules for the welding of a wide range of welded stainless steel fabrications other than pressure vessels and pressure piping,
and it applies to statically and dynamically loaded welds. It specifies materials of construction, weld preparations and weld qualities,
surface finish, heat treatment, qualification of welding procedures and welding personnel, and fabrications and inspection
requirements for welds related to stainless steel fabrications made up of combinations of stainless steel plate, sheet, sections
(including hollow sections and built-up sections), castings and forgings, by arc welding processes.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 74 pages

1554.7:2006 Welding of sheet steel structures


Provides requirements for the arc welding of steel structures made up of combinations of steel plate, sheet or sections, including
pipe, hollow sections and built-up sections (collectively referred to herein as sheet steels) up to 4.8 mm in thickness.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 96 pages

AS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower construction
Specifies dimensional material and marking requirements for single nut and double nut hot-dip galvanized steel bolts with associated
nuts and washers for tower construction with ISO metric coarse pitch series threads in diameters from 12 mm to 30 mm inclusive
and lengths up to 160 mm for single nut bolts, 125 mm for double nut bolts and from 180 mm to 270 mm for step bolts. Clamping
lengths are tabulated in an appendix and equations for the determination of the clamping lengths are given.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS/BS 1560: (Superseded by AS/NZS 4331)

AS/NZS 1562:- Design and installation of sheet roof and wall cladding

1562.2:1999 Corrugated fibre-reinforced cement


Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding. It also
provides test procedures for the determination of resistance to wind force. An appendix gives advice on the provision of roof
ventilation.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

1562.3:1996 Plastic
Specifies the procedures for the design and installation of plastic roof and wall cladding materials.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections
Specifies requirements for wrought copper and copper alloy rods, bars and sections, including hollow sections, having a diameter or
width across flats of not less than 1.6 mm, for machining and general purposes other than forging. It contains a table which relates
the alloy designations with other common designations.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
Specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings produced from it by the hot-forging
process, intended for engineering purposes.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS/BS 1571: (Withdrawn)

AS/NZS 1571:1995 Copper - Seamless tubes for air-conditioning and refrigeration


Specifies requirements for round, seamless copper tubes manufactured from phosphorus-deoxidized copper containing high residual
phosphorus (UNS alloy C12200) intended for use in air-conditioning and refrigeration. Requirements including chemical composition,
hardness, grain size and manufacturing tolerances are specified.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 1573:1995 Copper and copper alloys - Wire for engineering purposes
Specifies requirements for copper and copper alloy wire for general engineering purposes supplied in forms other than straight
lengths. Requirements including chemical composition, mechanical properties and dimensional tolerances are specified.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

AS/NZS 1574:1996 Copper and copper alloys - Wire for electrical purposes
Specifies requirements for three grades of copper wire, which may be plain or tinned and one grade of copper alloy wire for general
electrical purposes, supplied in forms other than straight lengths. It does not apply to wires intended for special applications such as
those requiring enamelling or textile covering, nor does it apply to wires taken from stranded conductors, either bare or covered or
from insulated cables and flexible cords. Chemical composition, mechanical and electrical properties and a hydrogen embrittlement
test are specified, and appendices provide information on related specifications and testing.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

AS/NZS 1576:- Scaffolding

1576.1:1995 General requirements


Sets out design and operational requirements for scaffolding, except trestle scaffolding, portable ladders intended to be used as
working platforms and elevating working platforms.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

1576.2-1991 Couplers and accessories


Specifies requirements for materials, design and performance of couplers and accessories for use with tubular scaffolding.
Reprinted to incorporate Amendment 1:1992
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 30 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

1576.3:1995 Prefabricated and tube-and-coupler scaffolding


Specifies performance requirements for prefabricated and tube-and-coupler scaffolding. It is to be read in conjunction with AS/NZS
1576.1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

1576.4-1991 Suspended scaffolding


Specifies requirements for materials, design, erection and dismantling of suspended scaffolds including the supporting structure.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 11 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

1576.5:1995 Prefabricated splitheads and trestles


Specifies requirements for splitheads and trestles that are used as supports for temporary platforms. Trestle ladders, which are
outside the scope of this Standard, are covered by AS 1892.1 and AS 1892.2.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

1576.6:2000 Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3


Specifies requirements for unsheeted metal tube-and-coupler scaffolding that does not exceed 33 m in height and is deemed to
comply with the performance requirements of AS/NZS 1576.3 for light, medium and heavy duty loads. The Standard does not apply
to prefabricated (modular) scaffolds and scaffolding installations that require specific engineering design to establish the strength of
any part of the scaffold or the adequacy of the supporting structure.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 1580:- Methods of test for paints and related materials

1580.0:1996 (Withdrawn)

1580.101.1:1999 Conditions of test - Temperature, humidity and airflow control


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.101.3-1992 (Withdrawn)

1580.101.4:1999 Conditions of test - Temperature control


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

1580.101.5:1999 Conditions of test - Temperature and humidity control


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.102.1-1992 (Withdrawn)

1580.102.2:1995 In-process sampling


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.103.1:1995 Examination and preparation of samples for testing


Provides a procedure for the examination of a single sample and the procedure for preparation by blending of multiple samples that
are to be tested. Identical with ISO 1513:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.104.1:2000 Recommended materials for test panels


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.105.1-1992 (Withdrawn)

1580.105.2-1993 (Withdrawn)

1580.106.1:1995 Preparation of timber test panels for outdoor weathering test


Provides a procedure for preparing timber test panels for the outdoor weathering test of AS/NZS 1580.457.1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

1580.107.1-1992 (Withdrawn)

1580.107.2:1995 Determination of wet film thickness from wet film mass


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.107.3:1997 Determination of wet film thickness by gauge


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
1580.107.8:1995 Application of paint at a nominated spreading rate by determination of wet film mass
(brush application)
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.108.1:1994 Determination of dry film thickness on metallic substrates - Non destructive methods
Specifies non-destructive test methods for determining the dry film thickness on metallic substrates using magnetic torsion pull-off
instruments, magnetic induction instruments and eddy current instruments.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.108.2-1993 (Withdrawn)

1580.202.1:1995 Density
Provides a procedure for determining the density of liquid paint that is not subject to foaming.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.202.2:1995 Density of water-dispersed paints subject to foaming


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.203.1-1993 (Withdrawn)

1580.204.1:1998 Fineness of grind


Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

1580.205.1:1997 Application properties - Brushing


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.205.2:1997 Application properties - Conventional air spraying


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.205.3:1997 Application properties - Roller coating


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.205.4:1998 Application properties - Airless spraying


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.208.1:1999 Thinner compatibility


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.211.1:1995 Degree of settling


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.211.2:1995 Ease of manual re-incorporation


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.212.2-1981 (Withdrawn)

1580.213.1:1997 Relative dry hiding power


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.213.2-1992 (Withdrawn)
1580.214.0:1996 Rheological properties - Guide to test methods
Provides guidance on the suitability of methods in the AS/NZS 1580.214 series of tests for the determination of consistency and
viscosity of paints and related materials.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.214.1:1997 Consistency - Stormer viscometer


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

1580.214.2:1996 Consistency - Flow cup


Provides a test procedure for determining the consistency of paints using a specific type of flow cup.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1580.214.3-1993 (Withdrawn)

1580.214.4:1996 Consistency - Rotothinner


Provides a test procedure for determining the consistency of paints using a rotothinner testing device.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.214.5:1997 Consistency - Rotational viscometer


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.214.6:1995 Consistency - ISO flow cups


Provides a test procedure for determining consistency use ISO style flow cups. Identical with ISO 2431:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1580.301.1-1992 (Withdrawn)

1580.301.2-1990 (Withdrawn)

1580.302.1-1993 (Withdrawn)

1580.401.1:1999 Surface dry condition


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.401.3-1990 (Withdrawn)

1580.401.5-1993 (Withdrawn)

1580.401.6-1992 (Withdrawn)

1580.401.8:1997 No-pick-up time of road marking paints


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.402.1-1992 (Withdrawn)

1580.403.1:1999 Scratch resistance


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.403.2:1994 Abrasion resistance - Taber abraser


Specifies a method for determining the abrasion resistance to coatings using Taber abraser equipment.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.404.1:1997 Recoating properties


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
1580.405.1:1996 Determination of pencil hardness of paint film
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.406.1-1993 (Withdrawn)

1580.407.1-1993 (Withdrawn)

1580.407.2-1993 (Withdrawn)

1580.408.1-1984 (Withdrawn)

1580.408.2-1993 (Withdrawn)

1580.408.4-1993 (Withdrawn)

1580.408.5:1994 Adhesion - Pull-off test


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.409.1-1992 (Withdrawn)

1580.409.2-1992 (Withdrawn)

1580.409.3-1992 (Withdrawn)

1580.452.1-1992 (Withdrawn)

1580.452.2-1992 (Withdrawn)

1580.453.1-1992 (Withdrawn)

1580.454.1-1992 (Withdrawn)

1580.455.1:1997 Resistance to water at room temperature


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.456.1-1993 (Withdrawn)

1580.457.1:1996 Resistance to natural weathering


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

1580.459.1:2000 Resistance to washing


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

1580.460.2-1982 (Withdrawn)

1580.461.1:1995 Determination of resistance to yellowing (dark chamber)


Specifies procedures for assessing the yellowing characteristics of white and pale coloured paints.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.481.0-1991 (Withdrawn)

1580.481.1.1-1991 (Withdrawn)

1580.481.1.2:1998 Exposed to weathering - Discolouration (including bronzing)


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.481.1.3:1998 Exposed to weathering - Degree of dirt collection


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.481.1.4:1998 Exposed to weathering - Degree of retention (after washing)


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.481.1.5:1999 Exposed to weathering - Change in gloss


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.481.1.6:1998 Exposed to weathering - Degree of erosion


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.481.1.7:1998 Exposed to weathering - Degree of checking


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.481.1.8:1998 Exposed to weathering - Degree of cracking


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.481.1.9:1998 Exposed to weathering - Degree of blistering


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1580.481.1.10:1998 Exposed to weathering - Degree of flaking and peeling


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.481.1.11:1998 Exposed to weathering - Degree of chalking


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.481.1.12:1998 Exposed to weathering - Degree of colour change


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.481.1.13:1998 Exposed to weathering - Degree of fungal or algal growth


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1580.481.3-1992 (Withdrawn)

1580.481.4-1975 (Withdrawn)

1580.481.5-1993 (Withdrawn)

1580.482.1:1994 Determination of fastness to light of interior paint


Provides a procedure for assessing the light-fastness of interior paint.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.483.1-1992 (Withdrawn)

1580.483.2:1994 Resistance to artificial weathering - Fluorescent UV-condensation type instruments


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.501.1:1994 Soluble lead content


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.501.2:1994 Preparation of acid extracts


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

1580.503.1:1994 Determination of water by the Dean and Stark method


Provides a procedure for determining the water in paint or paint materials using a Dean and Stark apparatus complying with AS R25.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1580.504.1-1993 (Withdrawn)

1580.505.1:1996 pH of water-based paints


Specifies a referee method and a production method for determining the pH of water-based paints.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

1580.601.1:1995 Colour - Visual comparison


Specifies a procedure for assessing colour in a test light booth.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

1580.601.2:1994 Colour - Principles of colour measurement


Technically identical with and reproduced from ISO 7724.1:1984.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.601.3:1994 Colour - Methods of colour measurement


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1580.601.4:1994 Colour - Calculation of colour differences


Reconfirmed: 2005
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1580.601.5:1994 Colour - Calculation of small colour differences using the CMC equation
Technically identical with and reproduced from BS 6923:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1580.602.1-1975 (Withdrawn)

1580.602.2:1995 Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and
85 degrees
Provides procedures for determining the specular gloss of non-metallic paint films using a glossmeter. Identical with and reproduced
from ISO 2813:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

1580.603.1-1992 (Withdrawn)

1580.604.1-1973 (Withdrawn)

NZSS 1582:1961 (Withdrawn)

NZS 1583:1964 (Withdrawn)

AS/NZS 1591:- Instrumentation for audiometry

1591.1:1995 Reference zero for the calibration of pure-tone bone conduction audiometers
Specifies reference equivalent threshold force levels, essential characteristics of the bone vibrator and levels of masking noise
applied to the ear not under test. These are applicable to the calibration of bone vibrators for pure-tone bone conduction audiometry.
Identical with and reproduced from ISO 389-3:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1591.4:1995 A mechanical coupler for calibration of bone vibrators


Specifies requirements for mechanical couplers used for calibrating bone-conduction audiometers and for making measurements on
bone vibrators and bone conduction hearing aids in the frequency range from 125 Hz to 8000 Hz inclusive. Identical with and
reproduced from IEC 60373:1990.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 1594:2002 Hot-rolled steel flat products


Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8 mm for
formability and extra formability grades, and up to 16 mm for other grades, and for widths up to 2000 mm. It includes slit material,
provided that the parent metal has an as-rolled width of not less than 600 mm.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 1595:1998 Cold-rolled, unalloyed, steel sheet and strip


Specifies requirements for cold-rolled, unalloyed, steel sheet and strip, supplied as both coil and cut lengths to chemical composition
only, or to strength, hardness or formability requirements. It also specifies two surface finishes (lustre and matt) and three levels of
surface quality.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

AS/NZS 1596:2008 The storage and handling of LP Gas


Specifies requirements for the location, design, construction, commissioning and operation of installations for the storage and
handling of LP Gas, and includes the management of emergencies.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 168 pages

AS/NZS 1599:1997 Pressure-sensitive adhesive packaging tapes


Sets out performance requirements for pressure-sensitive adhesive packaging tapes commonly used in packaging, sealing and
labelling operations.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 1601:1966 (Withdrawn)

AS/NZS 1604:- Specification for preservative treatment

1604.2:2004 Reconstituted wood-based products


This Standard sets out a specification for preservative treatment of reconstituted woodbased products including particleboard and
oriented strand board, and combinations of these materials. It specifies the preservative penetration pattern and the preservative
retention requirements suitable for each hazard class.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

1604.3:2004 Plywood
This Standard sets out a specification for preservative treatment of plywood products where the maximum thickness of any veneer
does not exceed 5.0 mm. It specifies the bond type, preservative penetration pattern, and the preservative retention requirements
suitable for each hazard class.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 27 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)
1604.4:2004 Laminated veneer lumber (LVL)
The objective of this Standard is to specify requirements for preservative treatment of laminated veneer lumber (LVL) for protection
against decay or insect attack.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

1604.5:2005 Glued laminated timber products


Sets out a specification for preservative treatment of glued laminated timber products. Specifies the preservative penetration pattern
and the preservative retention requirements suitable for each hazard class.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1605 Methods for sampling and analysing timber preservatives and preservative-treated timber

1605.1:2006 General requirements, sampling, and determination of sapwood and heartwood presence
Specifies general requirements for sampling and analysing timber preservatives and preservative-treated timber, and sets out the
method for determining the presence of sapwood and heartwood.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1605.2:2006 Determination of preservative penetration by spot tests


Sets out the method for determination of the penetration of preservative into preservative-treated timber.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1605.3:2006 Analysis methods for determination of preservative retention


Specifies the analysis methods for determination of preservative retention in treated timber.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 12 pages

1605.4:2006 Analysis methods for determination of preservative solution concentration


Specifies the analysis methods for determination of preservative solution concentration.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 12 pages

NZS/AS 1616:1974 (Withdrawn)

NZS/AS 1625-1976 (Withdrawn)

NZS/AS 1626:1974 (Withdrawn)

NZS/AS 1627:- (Withdrawn)

AS/NZS 1635:- Methods of test for pressure-sensitive adhesive tape

1635.4.2:1995 Stability - Accelerated ageing of cellulose tape


Sets out the method for determining the stability of pressure-sensitive adhesive cellulose tape by observation and measurement of
adhesion strength after accelerated ageing at elevated temperature and humidity.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1635.5.1:1995 Breaking strength


Sets out the method for determining the breaking strength of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1635.6.1:1995 Elongation
Sets out the method for determining the elongation at break of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1635.7.1:1995 Unwind force


Sets out the method for determining the force required to unwind pressure-sensitive adhesive tape from a roll.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1635.8.1:1995 Length
Sets out the method for determining the length of pressure-sensitive adhesive tape in a roll.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1635.9.1:1995 Thickness
Sets out the method for determining the thickness of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

1635.10.1:1995 Resistance to shear loading at elevated temperatures


Sets out the method for determining the ability of pressure-sensitive adhesive tape to resist shear loading at elevated temperatures.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1635.11.1:1995 Water vapour transmission rate


Sets out the method for determining the water vapour transmission rate of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

1635.21.1:1995 Mending stability


Sets out the method for determining whether a pressure-sensitive adhesive tape is suitable for long-term mending of paper by
qualitatively assessing adhesive ooze and colour stability.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS/AS 1649:1974 (Withdrawn)

NZS/AS 1650:1989 (Withdrawn)

NZS/AS 1651:1974 (Withdrawn)

NZS/AS 1652:1974 (Withdrawn)

NZS/AS 1657-1992 Fixed platforms, walkways, stairways and ladders. Design, construction and installation
Specifies requirements for design, construction and installation of fixed means of access to, and safe working at places normally
used by operating, inspection, maintenance and servicing personnel. Included in Appendices are methods for testing guardrails and
posts, as well as typical component dimensions and spacings for guardrailing.
Cited in BIA Approved Document D1/AS1
Adopted Standard
$89.20+GST (Members), $111.50+GST (Retail), 27 pages

AS/NZS 1660:- Test methods for electric cables, cords and conductors

1660.1:1998 Conductors and metallic components


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

1660.2:- Insulation, extruded semi-conductive screens and non-metallic sheaths

1660.2.1:1998 Methods for general application


Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

1660.2.2:1998 Methods specific to elastomeric, XLPE and XLPVC materials


Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

1660.2.3:1998 Methods specific to PVC and halogen free thermoplastic materials


Reprinted to incorporate Amendmment 1:2000
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

1660.2.4:1998 Methods specific to polyethylene and polypropylene materials


Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

1660.2.5:1998 Methods specific to cables above 1 kV


Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)

1660.3:1998 Electrical tests


Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

1660.4:1998 Complete cable and flexible cord


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

1660.5:- Fire tests

1660.5.1:2005 Test for vertical flame spread of vertically-mounted bunched wires or cables
Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or
optical, under defined conditions. The test is intended for type approval testing and various test categories are proposed. A modified
adoption of IEC 60332-3-10 Ed. 1.0 B (2000), IEC 60332-3-21 Ed. 1.0 B (2000), IEC 60332-3-22 Ed. 1.0 B (2000), IEC 60332-3-23
Ed. 1.0 B (2000), IEC 60332-3-24 Ed. 1.0 B (2000) and IEC 60332-3-25 Ed. 1.0 B (2000).
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

1660.5.2:2006 Measurement of smoke density of cables burning under defined conditions


Specifies the test procedure for the measurement of the density of the smoke emitted from electric or optical fibre cables burning
under defined conditions. Based on IEC 61034 Parts 1 and 2:2005 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages
1660.5.3:1998 Determination of the amount of halogen acid gas evolved during the combustion of
polymeric materials taken from cables
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1660.5.4:1998 Determination of degree of acidity of gases evolved during the combustion of materials
taken from electric cables by measuring pH and conductivity
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

1660.5.5:2005 Circuit integrity


Test methods that define the ability of cables to maintain circuit integrity under defined fire conditions. Technically equivalent to IEC
60331 Parts 11:1999, 12:2002, 21:1999, 23:1999, 25:1999 and 31:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

1660.5.6:2005 Test for vertical flame propagation for a single insulated wire or cable
Specifies a method of test for the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable,
or optical cable under fire conditions. Identical to and reproduced from IEC 60332-1-1:2004, IEC 60332-1-2:2004 and IEC 60332-1-
3:2004.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 1661:1962 (Superseded by NZS 5811, Part 1)

NZS 1662:1969 (Withdrawn)

AS/NZS 1664:- Aluminium structures

1664.1:1997 Limit state design


Specifies requirements for the design of aluminium building type structural load-carrying members and elements using the limit state
design criteria (LSD).
Reprinted to incorporate Amendment 1:1999
Cited in BIA Approved Document B1/VM1
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 74 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

1664.1, Supplement 1:1997 Limit state design - Commentary


Provides additional information on limit state design of aluminium structures, in relation to AS/NZS 1664.1:1997.
Reprinted to incorporate Aendment 1:1999
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 19 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

1664.2:1997 Allowable stress design


Specifies requirements for the design of aluminium alloy load-carrying members using the allowable stress design criteria (ASD).
Reprinted to incorporate Amendment 1:1999
Cited in BIA Approved Document B1/VM1
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 75 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

1664.2, Supplement 1:1997 Allowable stress design - Commentary


Provides additional information on allowable stress design of aluminium structures, in relation to AS/NZS 1664.2:1997.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 33 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1665:2004 Welding of aluminium structures


Specifies the requirements for the welding of aluminium and its weldable alloys in structures, components and equipment complying
with AS/NZS 1664.1 or AS/NZS 1664.2, by gas tungsten-arc welding (GTAW), gas metal-arc welding (GMAW), pulsed-arc welding
(GTAW or GMAW) and plasma-arc welding (PAW) processes.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

AS/NZS 1668:- The use of ventilation and airconditioning in buildings

1668.1:1998 Fire and smoke control in multi-compartment buildings


Sets out the minimum requirements for the design, construction, installation and commissioning of mechanical and air-conditioning
systems for fire and smoke control in multi-compartment buildings. Five specific methods of smoke control are defined and the
appropriate requirements specified for each. This Standard does not include requirements for smoke control systems utilizing
exhaust from above the hot layer. The Standard does not include requirements for maintenance of smoke control systems.
Reprinted to append Amendment 1:2002
Cited in BIA Approved Document C/AS1 & F7/AS1
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 110 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 1672:1974 (Withdrawn)

AS/NZS 1677:- Refrigerating systems

1677.1:1998 Refrigerant classification


Specifies a simple means of referring to common refrigerants instead of using the chemical name, formula, or trade name. It also
establishes a uniform system to be used in assigning the proper reference number and classification to refrigerants. The system for
refrigerants classification is defined and physical data of common refrigerants listed.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

1677.2:1998 Safety requirements for fixed applications


Specifies requirements for the safety aspects, in terms of the design, construction, installation and inspection of refrigerating
appliances, systems and ancillary equipment intended for use or installation in institutional, public assembly, residential, commercial
and industrial occupancies. It applies to new refrigerating systems, to extensions and modifications of existing systems and to used
systems on being reinstalled and operated at another site. It also applies in the case of the conversion of a system for use with
another refrigerant.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 52 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1680:- Interior lighting

1680.0:1998 Safe movement


Sets out minimum requirements for electric lighting systems within publicly accessible areas of buildings so as to provide visual
conditions that facilitate the safe movement of people in the normal use of the building. Does not include lighting requirements for
specific work tasks.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 1680.1:2006 General principles and recommendations


Provides general principles and recommendations for the lighting of building interiors to enhance the performance and comfort of
those performing visual tasks. Deals with illuminating essential task details, using both artificial light and daylight, while controlling or
excluding factors that might cause visual discomfort.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 128 pages

AS/NZS 1680.2.1:2008 Specific applications - Circulation spaces and other general areas
Sets out recommendations for the lighting of circulation spaces and other areas which commonly occur in buildings of various types.
It contains material that adds to or amends the recommendations in AS/NZS 1680.1 and is intended to be read in conjunction with
that Standard and with any applicable specific recommendations in other Standards in the AS(/NZS) 1680 series.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 1680.2.2:2008 Specific applications - Office and screen-based tasks


Sets out recommendations for the lighting of office and similar tasks, including screen-based tasks. While the tasks may be
commonly performed in interiors called ‘offices’, they may also be performed in other interiors, for example reading, writing and
screen-based tasks frequently occur in most types of interior workplace.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 40 pages

AS/NZS 1680.2.3:2008 Specific applications - Educational and training facilities


Creates a visual environment in which essential task details are made easy to see and adverse features which may cause visual
fatigue are either excluded or appropriately controlled. The Committee is of the view that the greatest scope for achieving this lies
with improvements in lighting quality rather than in the provision of higher illuminances.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 36 pages

AS/NZS 1680.2.4:1997 Industrial tasks and processes


Sets out recommendations for the lighting of industrial tasks and processes with a view to providing visual environments in which
such tasks and processes may be safely and efficiently performed. It is intended to be read in conjunction with the general
recommendations of AS 1680.1.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1680.2.5:1997 Hospital and medical tasks


Sets out recommendations for the lighting of a variety of tasks carried out within hospitals and medical facilities, particularly tasks
associated with clinical observation, treatment and care. It is intended to be read in conjunction with the general recommendations
of AS 1680.1.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

AS/NZS 1680.4:2001 Maintenance of electric lighting systems


Describes and explains the process of light loss in outdoor electric lighting systems due to environmental, operating and age related
conditions and examines the strategies to reverse and compensate for this loss. Sets out procedures for the estimation of
appropriate maintenance factors to make allowance for light losses in design calculations, and for the determination of economic
maintenance regimes and cycles. Also advises on the selection of appropriate lighting equipment and on servicing techniques to
promote the longevity of systems and minimize maintenance requirements.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

NZS/AS 1685-1984 (Withdrawn)

AS/NZS 1698:2006 Protective helmets for vehicle users


Provides a specification for protective helmets for motor cyclists and users of other motor vehicles. Also provides a basis for helmets
used in motor sports where speed is a determining factor.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 1711:1962 Model land drainage bylaw


Provides a model bylaw suitable for adoption by Land Drainage Boards.
Reprinted to append Amendment 1
$34.95+GST (Members), $43.69+GST (Retail), 11 pages
Amendment 1, 1972 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1715:2009 Selection, use and maintenance of respiratory protective equipment


Sets out the principles of respiratory protection, requirements and recommendations for the selection, use and maintenance of
personal respiratory protective equipment (RPE) in the workplace. This Standard does not deal with military applications for RPE, but
includes special needs of personnel involved in a special response hazardous material (HAZMAT) incident where respiratory
concerns need to be addressed.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 104 pages

NZS 1716:1965 (Withdrawn)

AS/NZS 1716:2003 Respiratory protective devices


Specifies minimum performance and testing criteria to be observed in the manufacture of respiratory protective devices.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 118 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1730:1996 Washbasins


Specifies requirements for washbasins made from cast iron vitreous enamelled, pressed steel vitreous enamelled, vitreous china,
stainless steel, plastics and composite materials.
Cited in BIA Approved Document G1/AS1
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheets, coiled sheet and plate
Specifies requirements for wrought aluminium and aluminium alloy flat sheet, coiled sheet and plate for general engineering
purposes. Chemical composition, mechanical properties and allowable tolerances on dimensions are specified. An appendix
provides information on typical fabrication characteristics and applications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

NZS/AS 1735:- Lifts, escalators and moving walks (SAA Lift Code)

1735.8-1986 Inclined lifts


Sets out requirements for power-operated inclined lifts of the car or platform type for public and private use, other than stairway lifts,
temporary lifts, or hoists used solely for building work, and amusement devices.
Reprinted to incorporate Amendment 1
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 20 pages
Amendment 1, 1989 $29.95+GST (Members), $37.44+GST (Retail)

1735.11-1986 Fire-rated landing doors


Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells. Applies
where doors are required to have a fire-rating certificate.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 6 pages

1735.18:2002 Passenger lifts for private residence - Automatically controlled


Specifies requirements for automatically controlled small-sized, low-speed passenger lifts that are installed in private residence, as
defined in AS 1735.1.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

NZS/BS 1740.1-1971 (Withdrawn)

NZS/ISO 1745:1975 (Withdrawn)

NZS/AS 1746-1991 Conductors - Bare overhead - Hard-drawn copper


Sets out requirements and tests necessary for homogeneous bare electrical conductors for overhead power transmission, and
constructed of hard-drawn copper wires. A range of wire sizes and their properties are provided.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 9 pages

AS/NZS 1747:2003 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of
accessories
Specifies standard procedures for the repair and testing of reeling, trailing and feeder cables used in mining applications.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 60 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1748:2006 Timber - Mechanically stress-graded for structural purposes


Specifies structural property, marking and physical requirements for mechanically stress-graded timber. Physical requirements are
given for strength considerations as well as for utility considerations.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 1754:1963 (Withdrawn)

AS/NZS 1754:2004 Child restraint systems for use in motor vehicles


Specifies requirements for restraining devices for child occupants of passenger cars and their derivatives, such devices being
intended, when properly selected, correctly installed and correctly adjusted, to reduce the risk of bodily injury in a vehicle impact. The
devices may also have application to other types of vehicles. NOTE: This Standard does not cover child restraints which are an
integrated feature of a motor vehicle.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 47 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

NZS 1762:1963 Specification for PVC-covered, hard-drawn copper conductors for overhead power lines
Applies to single-core stranded hard-drawn copper conductors having not fewer than seven strands covered with PVC and intended
for use on overhead power lines not exceeding 660 volts to earth. Does not apply to neutral-screened aerial cables.
Reprinted to append Amendment 1:1966
$34.95+GST (Members), $43.69+GST (Retail), 19 pages
Amendment 1, 1966 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1766:- Food microbiology

1766.2:- Examination for specific organisms

1766.2.9:1997 Vibrio parahaemolyticus


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

1766.2.12:2002 Escherichia coli in bivalve molluscs - Rapid method


To revise the method for examination of escheria coli in bivalve molluscs to remove the ambiguous statement given in relation to its
applicability for regulatory purposes and to stipulate the resuscitation step as an integral part of the method.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

1766.2.15:1998 Listeria monocytogenes in dairy products


Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

1766.2.16.1:1998 Food and animal feeding stuffs - Horizontal method for the detection and enumeration of
Listeria monocytogenes - Detection method
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

1766.3:- Examination of specific products

1766.3.5:1999 Molluscs, crustaceans and fish, and products thereof


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

1766.3.14:1998 Butter, margarine and related products


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

1766.3.17:1997 Sweetened condensed milks


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 1768:2007 Lightning protection


Provides guidelines for the protection of persons and property from the hazards of lightning. Applies to conventional lightning
protection systems consisting of air terminations, downconductors, earthing systems and surge protective devices. Also provides a
comprehensive risk management process for the determination of the risk of damage due to lightning for a range of structures.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 192 pages

NZS/ISO 1770:1981 (Withdrawn)

NZS/BS 1780:1985 (Withdrawn)

AS/NZS 1800:1998 Occupational protective helmets - Selection, care and use


Incorporates changes adopted in the revision of AS 1801-1981, mostly related to the specification of three different types of
occupational protective helmet. Includes new Appendix, summarizing optional or additional requirements that may be requested by
the purchaser.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 1801:1963 (Withdrawn)

AS/NZS 1801:1997 Occupational protective helmets


Sets out the requirements for three types of protective helmets reflecting their intended use. It deals with construction of the helmet
shell and helmet finish and includes methods of tests. Specific additional performance requirements are given for occupational
protective helmets used in high temperature workplaces and for bushfire fighters` helmets based on industrial helmets.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1802:2003 Electric cables - Reeling and trailing - For underground coal mining purposes
Specifies the application, materials, construction, dimensions and tests for elastomer insulated and sheathed reeling and trailing
electric cables, for use in underground coal mines.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 45 pages

AS/NZS 1809:1999 Wool - The preservation of the integrity of raw wool samples for display
Sets out the essential requirements necessary to maintain grab samples of raw wool obtained from bales for display purposes in sale
by sample. Recommended preservation procedures are given, covering handling during sampling, storage, handling of drawn
samples, sample display, and handling after display.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
NZS 1818:1963 (Withdrawn)

NZS 1822:1964 (Withdrawn)

NZS 1825:1963 (Superseded by NZS/AS 3101)

AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres - Special protection - Type of
protection 's'
Allows the design, assessment and testing of equipment or parts of equipment that cannot be classified within a recognized
technique or combination of recognized techniques because of functional or operational limitations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

NZS/AS 1830:1986 (Withdrawn)

NZS/AS 1831:1985 (Withdrawn)

NZS/AS 1832:1985 (Withdrawn)

NZS/AS 1833:1986 (Withdrawn)

NZS/ISO 1834:1980 (Withdrawn)

NZS/ISO 1835:1980 (Withdrawn)

NZS/ISO 1836:1980 (Withdrawn)

AS/NZS 1838:1994 Swimming pools - Premoulded fibre-reinforced plastics - Design and fabrication
Sets out requirements for premoulded plastic swimming pools exceeding 7500 L in volume and 750 mm in depth, constructed from
fibre-reinforced plastics based on thermosetting resin systems. Minimum design soil loads are given for the design of the pool. In-
service performance requirements for service degradation are set out and a water resistance test is described using a temperature of
80 degrees C.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 1839:1994 Swimming pools - Premoulded fibre-reinforced plastics - Installation


Sets out procedures for the installation of premoulded fibre-reinforced plastic swimming pools complying with the requirements of
AS/NZS 1838:1994, for above and below ground locations.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 1841:1964 Fusion welded pressure tanks


Establishes requirements for cylindrical fusion welded pressure tanks for water supply.
Reprinted to append Amendment 1:1971
$34.95+GST (Members), $43.69+GST (Retail), 13 pages
Amendment 1, 1971 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1841:- Portable fire extinguishers


1841.1:2007 General requirements
Provides general requirements for portable fire extinguishers other than aerosol type.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

1841.2:2007 Specific requirements for water type extinguishers


Specifies requirements for portable rechargeable fire extinguishers of the water type.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 2 pages

1841.3:2007 Specific requirements for wet chemical type extinguishers


Specifies requirements for portable rechargeable fire extinguishers of the wet chemical type. Note that some extinguishing agents
may be classified by regulatory authorities as being hazardous. In such cases these authorities may require special markings on
containers and special precautions to be taken when disposing of the extinguishants and their containers.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 2 pages

1841.4:2007 Specific requirements for foam type extinguishers


Specifies requirements for foam-type portable rechargeable fire extinguishers.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 2 pages

1841.5:2007 Specific requirements for powder type extinguishers


Specifies requirements for portable rechargeable fire extinguishers of the powder type.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 4 pages

1841.6:2007 Specific requirements for carbon dioxide type extinguishers


Specifies requirements for portable rechargeable fire extinguishers of the carbon dioxide type. It does not apply to the design and
construction of the gas cylinder within which the carbon dioxide is contained.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 4 pages

1841.7:2007 Specific requirements for vaporizing liquid type extinguishers


Specifies requirements for portable rechargeable fire extinguishers of the vaporizing liquid type.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 2 pages

1841.8:2007 Specific requirements for non-rechargeable type extinguishers


Specifies requirements for portable non-rechargeable, stored-pressure fire extinguishers.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 4 pages

NZS 1845:1964 (Superseded by AS/NZS 4253)

AS/NZS 1850:1997 Portable fire extinguishers - Classification, rating and performance testing
Classifies extinguishers according to the general classes of fires for which they are suitable and gives a method of rating. Tests for
Classes A, B, C, D, E and F are included.
Reprinted to append Amendment 1:2001
Cited in Hazardous Substances (Classes 1 to 5 Controls) Regulations 2001; Marine Rules: Part 40A - Design, Construction and
Equipment - Passenger Ships which are not Solas Ships; Marine Rules: Part 42B - Safety Equipment - Fire Appliances -
Performance Standards
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1851: (Withdrawn)

AS/NZS 1852:- International electrotechnical vocabulary

1852.0:2000 Introduction and list of parts of AS 1852 and IEC 60050


Lists the Parts of the International Electrotechnical Vocabulary (IEV). The IEV is a glossary of terms for electrotechnology issued as
separate Parts, each dealing with a specific field. Also indicates where there are equivalent Parts of AS 1852, and provides
endorsement of Parts not published by Standards Australia or Standards New Zealand. The Parts of IEV may be purchased from
Standards New Zealand. For a compilation of the terms and definitions, see the IEC Multilingual Dictionary on CD-ROM.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

AS/NZS 1859:- Reconstituted wood-based panels - Specifications

1859.1:2004 Particleboard
Specifies product requirements for the purposes of quality control in manufacture and performance requirements for three classes of
particleboards, i.e., standard (STD), moisture resistant (MR) and high performance (HP) particleboards.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

1859.2:2004 Dry-processed fibreboard


Specifies product requirements for the purposes of quality control in manufacture and performance requirements for dry-processed
fibreboards, including ultra-low-density, low-density, medium-density and high-density fibreboards.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

1859.3:2005 Decorative overlaid wood panels


Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. It
specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel
substrate, i.e. low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling
and storage of decorative wood panels and selection and application of screw fasteners.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

1859.4:2004 Wet-processed fibreboard


Specifies requirements for the purpose of quality control in manufacture and performance requirements for the application of wet-
processed fibreboards, including hardboards and softboards.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

AS/NZS 1860:- Particleboard flooring

1860.1:2002 Specifications
Specifies product requirements for the purpose of quality control in manufacture and the performance requirements in application of
particleboard flooring intended to be installed in accordance with AS 1860.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1865:1997 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip
Specifies requirements for wrought aluminium and aluminium alloy drawn or cold-finished wire, rod, bar and strip products for
general engineering purposes. Chemical composition, mechanical properties and dimensional tolerances are specified. Appendices
provide purchasing guidelines, fabrication characteristics and application data, and related composition specifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
Specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow shape products for general
engineering purposes. Chemical composition and mechanical properties are specified, and allowable tolerances on dimensions are
included for rod, bar, solid shapes, and Class A, Class B, Class C and Class D hollow shapes. Examples illustrating the use of
tolerance tables are included.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

AS/NZS 1867:1997 Aluminium and aluminium alloys - Drawn tubes


Specifies requirements for wrought aluminium and aluminium alloy drawn tube for general engineering purposes. Chemical
composition and tensile properties are specified, and allowable tolerances on dimensions included. Included are two appendices,
one provides guidelines on information to be supplied by the purchaser at the time of enquiry or order, the other lists fabrication
characteristics and application data.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 1869:1996 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town
gas
Specifies requirements for hose and hose assemblies for liquefied petroleum gases (LPG), natural gas, town gas manufactured from
oil products, tempered liquefied gas, and simulated natural gas in transport, automotive, industrial and domestic applications. It
provides for hose up to and including 100 mm inside diameter and 2.6 MPa maximum working pressure.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

AS/NZS 1873:- Powder-actuated (PA) hand-held fastening tools

1873.1:2003 Selection, operation and maintenance


Provides guidance on the selection, operation and maintenance of powder-actuated (PA) hand-held fastening tools.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

1873.2:2003 Design and construction


Sets out requirements for the design, construction and performance of both direct-acting and indirect-acting powder-actuated (PA)
hand-held tools. Appendices include methods for measuring the velocity of fasteners discharged from PA tools and for determining
the ability of a PA tool to resist accidental firing when dropped.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

1873.3:2003 Charges
Sets out requirements, colour identification and relative strengths of explosive charges intended for use in powder-actuated (PA)
hand-held fastening tools complying with AS/NZS 1873.2.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 5 pages

1873.4:2003 Fasteners
Sets out requirements for fasteners intended for use with powder-actuated (PA) hand-held fastening tools complying with AS/NZS
1873.2.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

NZS/AS 1874:1988 (Withdrawn)

NZS 1880:1964 (Withdrawn)

NZS 1884:1969 (Withdrawn)

NZS/AS 1884-1985 Floor coverings - Resilient sheet and tiles - Laying and maintenance practices
Covers laying and fixing of unbacked floor coverings in all forms including semi-rigid PVC, flexible PVC, linoleum, cork, and rubber. It
deals with the site inspection, requirements for concrete, timber, particleboard or plywood subfloors, installation of underlays,
conditioning of floor covering and subfloor, laying and maintenance procedures. A method for testing dryness of concrete subfloors is
given in an appendix.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 13 pages

AS/NZS 1891:- Industrial fall-arrest systems and devices

1891.1:2007 Harnesses and ancillary equipment


Specifies requirements for the materials, design, manufacture and testing of harnesses, lanyards, pole straps and associated
equipment including connecting devices and personal energy absorbers for industrial restraint and fall-arrest purposes.
Reprinted to incorporate Amendment 1:2007 and Amendment 2:2008
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

1891.2:2001 Horizontal lifeline and rail systems


Specifies design and performance requirements for systems and associated component hardware for horizontal lifelines and rails
used for fall-arrest purposes. The Standard covers systems using either rigid rails or flexible lines. Test methods are given in
appendices.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages

1891.2, Supplement 1:2001 Horizontal lifeline and rail systems - Prescribed configurations for horizontal lifelines
(Supplement to AS/NZS 1891.2:2001)
Specifies a range of system configurations which have been determined by investigation to meet the performance and safety
requirements of AS/NZS 1891.2. It also specifies hardware and installation requirements for such systems.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1891.3:1997 Fall-arrest devices


Specifies requirements for the design and performance of fall-arrest devices comprising those which travel down either a fixed or
flexible anchorage line, and those which pay out an anchorage line.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

1891.4:2000 Selection, use and maintenance


Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems
and devices based on the use of safety harnesses (including belts), horizontal life lines and rails, fall-arrest devices, and associated
lanyards, connectors, anchorages and fittings.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 69 pages

AS/NZS 1892:- Portable ladders

1892.1:1996 Metal
Specifies the minimum requirements for the design and construction of portable metal ladders rated for industrial or domestic use. It
applies to single, extension, multipurpose, step and trestle ladders, representing a combination of these types. A complete range of
test methods are included as Appendices. Ladder accessories such as ladder-levellers, stabilizers, stand-off devices, ladder jacks
and straps are not covered.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 83 pages

1892.3:1996 Reinforced plastic


Specifies the minimum requirements for the design and construction of portable reinforced plastic ladders rated for industrial or
domestic use. It applies to single, extension, multipurpose, step and trestle ladders representing a combination of these types. A
complete range of the test methods are included as Appendices. Ladder accessories such as ladder-levellers, stabilizers, stand-off
devices, ladder jacks and straps are not covered.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 90 pages

1892.5:2000 Selection, safe use and care


Sets out the minimum recommended safe practices and requirements for the selection, safe use and care of portable ladders
constructed from any material.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 1900:- Model building bylaw

Part 1:1985 (Withdrawn, see New Zealand Building Code)

Part 2:1984 (Withdrawn, see New Zealand Building Code)

Part 3:1985 (Withdrawn, see New Zealand Building Code)

Part 4:1985 (Withdrawn, see New Zealand Building Code)

Part 5:1988 (Withdrawn, see New Zealand Building Code)

Part 6:1986 (Withdrawn, see New Zealand Building Code)

Part 7:1985 (Withdrawn, see New Zealand Building Code)

Part 8:1976 (Withdrawn, see New Zealand Building Code)

Part 9:1990 (Withdrawn, see New Zealand Building Code)

Part 10:1964 (Withdrawn, see New Zealand Building Code)

Part 11, Section 1:1986 (Withdrawn, see New Zealand Building Code)

Part 11, Section 2:1985 Special structures. Division 11.2 Farm buildings
Sets out requirements for the design and construction of farm buildings other than residential or residential accessory buildings.
Applies to concrete, timber, masonry and steel construction. Set out in the form of a model bylaw.
Reprinted to append Amendment 1:1992
Cited in BIA Approved Document B1/VM1
$39.95+GST (Members), $49.94+GST (Retail), 20 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 1905:- Components for the protection of openings in fire-resistant walls

1905.1:1997 Fire-resistant doorsets


Specifies requirements for the design, construction and installation of fire-resistant doorsets including transom panels but excluding
lift-landing doors and access panels, used to protect openings in walls and partitions required to resist the passage of fire. Shows the
variation between Australia and New Zealand in regard to the certification, marking and identification of doorsets as determined by
the building codes and practice in both countries. A series of tests by which the physical capacity of the doorsets may be measured
is also included.
Cited in BIA Approved Document C/AS1
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

AS/NZS 1906:- Retroreflective materials and devices for road traffic control purposes

1906.1:2007 Retroreflective sheeting


Specifies the performance requirements for retroreflective sheeting used in the manufacture of road signs and related traffic control
devices. It does not apply to retroreflective pavement markings.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 60 pages

1906.2:2007 Retroreflective devices (non-pavement application)


Specifies performance requirements for retroreflective devices (known as 'retroreflectors') intended for use as roadside delineators
for mounting above the pavement, e.g. on posts.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 20 pages

1906.4:1997 High visibility materials for safety garments


Specifies the photometric, colorimetric and physical property requirements for high visibility materials for outdoor daytime use, and
retroreflective materials for use at night or in other dark conditions, for the manufacture or incorporation into industrial safety
garments designed to be worn in situations where the wearer needs to be highly visible. The Standard does not include immersible
water safety materials such as those used on personal flotation devices.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 1910:1965 (Superseded by AS/NZS 3350.2.6:1998)

NZS/BS 1916: (Withdrawn)

NZS/AS 1917-1976 (Withdrawn)

NZS/ASTM F 1918(Int):2001 (Interim standard - Expired 7 July 2002)

AS/NZS 1927:1998 Pedal bicycles - Safety requirements


Specifies safety requirements for the design, assembly, and performance of all types of pedal bicycles and subassemblies of pedal
bicycles having a wheelbase of 640 mm or greater, including power-assisted bicycles with engines up to 0.2 kW, but excludes track
racers and one-of-a-kind bicycles. It also specifies requirements for the instructions to be given in a manual on use and
maintenance, and for the instructions for the assembly of bicycles offered for sale in a partially assembled state.
Cited in Product Safety Standards (Pedal Bicycles) Regulations 2000
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 46 pages

AS/NZS 1935:- Acoustics - Determination of sound absorption coefficient and impedance in impedance
tubes

1935.1:1998 Method using standing wave ratio


Specifies a method for the determination of the sound absorption coefficient, reflection factor and surface impedance or surface
admittance of materials and objects. This Standard is technically equivalent to and has been reproduced from ISO 10534-1:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

NZS/BS 1936: (Withdrawn)

NZS/ISO R1938.2-1971 (Withdrawn)

NZS/ISO 1940.1-1986 (Withdrawn)

NZS 1951:1965 (Withdrawn)

AS/NZS 1957:1998 Textiles - Care labelling


Specifies words, phrases and symbols detailing the care treatment of upholstery, garments and other articles in order to supply
relevant and accurate information to a prospective purchaser at the point of sale. It states what information should be included on a
permanent label and what instructions may be supplied separately in lieu of a permanent label. It specifies the method of labelling
yarn and the method by which care instructions for piece goods are to be made available.
Cited in Consumer Information Standards (Care Labelling) Regulations 2000
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 1960 Motor vehicle brake fluids

1960.1:1995 (Withdrawn)

1960.2:1995 Silicone type


Specifies the requirements for automotive brake fluids of silicone type for use in hydraulic braking systems of motor vehicles. In this
Standard, the requirements of Grade 4 (equivalent to DOT 5) are specified, along with methods of test. Grades 1, 2 and 3 brake fluid
have been deleted.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS/AS 1963-1977 (Withdrawn)

AS/NZS 1972:2006 Electric cables - Underground coal mines - Other than reeling and trailing
Specifies the construction of cables for fixed apparatus, armoured high voltage cables, feeder cables, machine cables and mine
shaft winder cables for underground use in coal mines.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 48 pages

NZS/AS 1977-1977 (Withdrawn)

NZS/AS 1979-1993 (Withdrawn)

NZS 1989:1965 Specification for protected-type non-reversible plugs, socket-outlets, cable-couplers and
appliance-couplers, with earthing contacts for single phase alternating current circuits up
to 250 volts
Ratings. 5, 15, 30 A includes single and double-pole fused plugs for ring main circuits. Dimensions for interchangeability,
construction, tests, gauge details and dimensions. Non-reversible feature essential. Appendix on: complete system of key and
keyway positions for non-interchangeability between different supply systems, applications. Identical with BS 196:1961.
Approved electrical safety Standard. Reprinted incorporating Amendments 1 to 4
Cited in Electricity Regulations 1997
Adopted Standard
$454.55+GST (Members), $568.19+GST (Retail), 64 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, $29.95+GST (Members), $37.44+GST (Retail)

NZS/ISO 1989:1978 (Withdrawn)

AS/NZS 1995:2003 Welding cables


Specifies the construction, test, current rating and duty cycle of welding cables.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

NZS 1998:1965 (Withdrawn)

NZS/ASTM D1998:1991 (Withdrawn)


NZS 1999:1965 (Superseded by AS/NZS 3103)

NZS 2000:- (Withdrawn)

AS/NZS 2001:- Methods of test for textiles

2001.1:- General

2001.1.2:1998 Universal yarn count system (Tex System)


Sets out a universal numbering system to designate the fineness or coarseness of textile fibres, yarns, intermediate products (e.g.
tops and rovings) and other products of similar structures.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

2001.4:- Colourfastness tests

2001.4.4:1998 Determination of colourfastness to water spotting


Provides a method for determining the resistance of the colour of textiles of all kinds and in all forms to water spotting. This Standard
is identical with and has been reproduced from ISO 105-E07:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

2001.4.5:1998 Determination of colourfastness to chlorinated swimming pool water


Sets out a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in
concentrations such as are used to disinfect swimming pool water (break-point chlorination). This Standard is identical with and has
been reproduced from ISO 105-E03:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

SNZ HB 2002:2003 Code of Practice for Working in the Road


This Handbook deals with aspects of the roles and responsibilities of Road Controlling Authorities, principal providers, utility
operators and contractors; consents and work approvals; and details of construction requirements; for the purpose of installation and
maintenance of utilities within the road corridor.
$59.95+GST (Members), $74.94+GST (Retail), 60 pages

AS/NZS 2007:- Performance of household electrical appliances - Dishwashers

2007.1:2005 Methods for measuring performance, energy and water consumption


Specifies test methods and minimum performance requirements so that the performance of dishwashers intended for household and
similar use can be measured, compared and evaluated.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

2007.1, Supplement 1:2001 Energy consumption and performance - Test material - Spinach 800 gm tin
Comprises one 800 gm tin of spinach for inclusion as a soiling agent required when testing the performance of dishwashers to
AS/NZS 2007.1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail)

2007.2:2005 Energy efficiency labelling requirements


Specifies the energy efficiency labelling requirements for electric dishwashers intended for household and similar use. This Standard
does not specify safety requirements.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages
AS/NZS 2009:2006 Glass beads for pavement-marking materials
Specifies materials and design requirements for glass beads with retroreflective properties for use in pavement-marking materials.
Reprinted to incorporate Amendment 1 :2007
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 48 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2010:1970 Specification for flat pallets for materials handling


Dimensions, safe working loads, construction and testing of two-way and four-way entry flat pallets constructed of timber or other
materials and used for the unit load method of materials handling. Includes definitions relating to pallets and to component parts of
pallets.
Reprinted to append Amendments 1 & 2
$34.95+GST (Members), $43.69+GST (Retail), 21 pages
Amendment 1, 1975 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1982 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2016.1-1981 (Withdrawn)

AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling


Specifies requirements for the design, construction, location, and operation and testing of systems for the storage and handling of
anhydrous ammonia. Requirements for the management of emergencies involving anhydrous ammonia and for the fire protection of
any associated facilities are also specified.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 63 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2023:1995 Baths for ablutionary purposes


Specifies materials, construction and installation requirements for baths manufactured from cast iron vitreous enamel, pressed steel
vitreous enamel, vitreous china, stainless steel, plastic and composite materials.
Cited in BIA Approved Document G1/AS1
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 2031:2001 Selection of containers and preservation of water samples for microbiological analysis
Sets out requirements and recommendations for the selection and preparation of sample containers for the preservation and
transport of water and waste water samples for microbiological analyses.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 2032:2006 Installation of PVC pipe systems


Proposes methods for handling, storage, installation, testing and commissioning of polyvinyl chloride (PVC) pipelines, above or
below ground, for pressure and non-pressure applications conveying liquids.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2033:2008 Installation of polyethylene pipe systems


Specifies methods for handling, storage, installation, testing and commissioning of polyethylene (PE) pipelines, above or below
ground, for pressure and non-pressure applications conveying liquids.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 44 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)
NZS 2035:1965 (Withdrawn)

NZS 2038:1966 (Withdrawn)

AS/NZS 2040:- Performance of household electrical appliances - Clothes washing machines

2040.1:2005 Methods for measuring performance, energy and water consumption


Specifies the method of determining the performance characteristics of electric clothes washing machines intended for household
and similar use. This Standard is not intended for the evaluation or comparison of the performance of detergents or other laundry
aids. This Standard does not specify safety requirements. Based on IEC 60456:2003 with major modifications.
Reprinted to incorporate Amendment 1:2007
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 80 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

2040.1, Supplement 1:1998 (Withdrawn)

2040.1, Supplement 2:1998 (Withdrawn)

2040.2:2005 Energy efficiency labelling requirements


Specifies the energy efficiency labelling requirements for electric clothes washing machines intended for household and similar use.
This Standard does not specify safety requirements. Examples of appliances covered by this Standard are top loading non-drum
type washers (usually impeller or agitator), front and top loading drum type washers and the washer function of combination washer-
dryers.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 2041:1998 Buried corrugated metal structures


Provides manufacturing requirements, design methods and installation requirements for structures assembled from curved
corrugated metal sheet or plates. Structures covered include pipes, pipe-arches, arches and special shapes. Design methods are
based on ring compression and buckling failure modes. Information is given on durability. Considerations include handling stiffness,
fill requirements and compaction. Tables of maximum and minimum cover are given as a guide to structure selection.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 97 pages

NZS 2043:1966 (Withdrawn)

NZS/BS 2051.1-1973 (Withdrawn)

NZS/BS 2052:1989 (Withdrawn)

AS/NZS 2053:- Conduits and fittings for electrical installations

2053.1:2001 General requirements


Specifies general requirements for both metal and non-metal conduits and fittings to protect cables used in electrical installations.
Mechanical properties, electrical characteristics and material requirements are given. Requirements for particular types of conduits
and fittings are covered in the other parts of the AS/NZS 2053 series.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

2053.2:2001 Rigid plain conduits and fittings of insulating material


Specifies requirements for rigid plain conduits and fittings of insulating material used in electrical installations. To be read in
conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
2053.3:1995 Rigid plain conduits and fittings of fibre-reinforced concrete material
To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

2053.4:1995 Flexible plain conduits and fittings of insulating material


To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

2053.5:2001 Corrugated conduits and fittings of insulating material


Specifies requirements for corrugated conduits and fittings of insulating material used in electrical installations. To be read in
conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

2053.6:2001 Profile-wall, smooth-bore conduits and fittings of insulating material


Specifies requirements for rigid, non-threadable, profile-wall, smooth-bore conduits and fittings of insulating materials used in
electrical installations. To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

2053.7:2002 Rigid metal conduits and fittings


Specifies requirements for threadable and non-threadable plain rigid metal conduits and fittings in sizes 20 to 50 mm OD. To be read
in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

2053.8:1995 Flexible conduits and fittings of metal or composite material


To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

AS/NZS 2063:2008 Bicycle helmets


Specifies construction requirements and the basic performance requirements for impact energy attenuation, helmet stability, load
distribution, strength and effectiveness of the retention system and its attachment points and peripheral vision clearance for
lightweight protective helmets intended to mitigate the adverse effects of a blow to the head.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 20 pages

AS/NZS 2064:1997 (Superseded by AS/NZS CISPR 11:2002)

NZS 2065:1966 (Superseded by NZS/AS 3134)

NZS/AS 2074:1982 (Withdrawn)

NZS 2078:1966 (Withdrawn)

AS/NZS 2080:2006 Safety glazing for land vehicles


Specifies the requirements and includes methods of tests for flat and curved toughened and laminated safety glazing for
windscreens and other glazing for land vehicles.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 6 pages

AS/NZS 2081:- Electrical equipment for coal and shale mines - Electrical protection devices

2081.1:2002 General requirements


Specifies performance requirements for specific electrical protection devices for use in coal and shale mines. It includes information
on the general requirements for earth-continuity monitoring, earth-leakage protection, lockout earth-fault protection and earth-fault
current limiting devices.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2081.2:2002 Earth-continuity monitoring devices


Specifies requirements for earth-continuity monitoring devices intended to monitor the pilot-earth loop(s) in cables supplying power to
equipment and the requirement to initiate tripping to prevent closure interruption of the circuit device, and requirements for
stop/start/pilot control functions in the earth-continuity monitoring device. Test methods are included.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

2081.3:2002 Earth-leakage protection systems for use on earth-fault current limited systems (IT
systems)
Specifies performance requirements for specific electrical protection devices for use in coal and shale mines. It includes information
on the general requirements for earth-continuity monitoring, earth-leakage protection, lockout earth-fault protection and earth-fault
current limiting devices.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 21 pages

2081.4:2002 Lockout earth-fault protection devices


Specifies requirements for lockout earth-fault protection devices intended primarily for use in conjunction with trailing cables
supplying mobile and portable equipment. Test methods are included.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2081.5:2002 Earth fault current limiters


Specifies requirements for devices intended for use in a.c. power supply systems for providing earth-fault current limitations. Test
methods are included.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

NZS 2085:1966 (Withdrawn)

AS/NZS 2088:2000 Prams and strollers - Safety requirements


Specifies materials, construction, performance and labelling requirements for prams and strollers.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 51 pages

AS/NZS 2097:2006 Methods for sampling veneer and plywood


Provides procedures for sampling veneer and plywood for determination of physical and mechanical properties of mill runs, specially
produced veneers and plywoods, and consignments.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

NZS 2098:1966 (Withdrawn)

AS/NZS 2098:- Methods of test for veneer and plywood

2098.0:2006 General introduction and list of methods


General introduction and list of methods.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

2098.1:2006 Moisture content of veneer and plywood


Two methods for determining the moisture content of veneer and plywood are described in this Standard. Of these, the 'oven-dry'
method is more precise but more complex than the electrical resistance measuring method; it is also destructive.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.2:2006 Bond quality of plywood (chisel test)


Sets out the method for determining the quality of bond in plywood.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.3:2006 Bond quality and strength of scarf joints in plywood


Sets out the methods for determining the quality and relative bond strength of scarf joints in plywood.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.4:2006 Measurement of dimensions and shape for sheets of veneer and plywood
Sets out the methods for determining the thickness, length, width, squareness, edge straightness and flatness of veneer and
plywood sheets. It applies to whole flat sheets.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.5:2006 Resistance of gluelines in plywood to attack by micro-organisms


Sets out the method for determining the resistance of gluelines in plywood to attack by micro-organisms.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2098.6:2006 Depth of peeler checks in veneer and plywood


Sets out the method for determining the depth of peeler checks in veneer and plywood.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2098.7:2006 Density of veneer and plywood


Sets out two methods for determining the density of veneer and plywood.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.8:2006 Water absorption and thickness swelling of unpainted plywood


Sets out the method for determining the water absorption, through the face and edge, of unpainted plywood, and the hygroscopic
swelling resulting from the uptake of water.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2098.9:1995 (Superseded by AS/NZS 2269.1:2008)

2098.10:1995 (Superseded by AS/NZS 4357.1:2005)

2098.11:2005 Determination of formaldehyde emissions for plywood


Specifies a method for the determination of formaldehyde emissions from laminated veneer lumber (LVL). This Standard is based
upon the Japanese Agricultural Standard (JAS) method specified in MAFF Notification No. 237 but has been adapted to suit
products commonly manufactured and sold in Australian and New Zealand. The test method has been adapted to suit products
commonly manufactured and sold in Australia and New Zealand. Specifically, it allows product to be tested in the same condition
that it is supplied to the market, for example with edge and/or surface finish.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZMP 2101:1971 (Withdrawn)

NZS 2105:1966 (Superseded by NZS 7204)

AS/NZS 2106 Methods for the determination of the flash point of flammable liquids (closed cup)
2106.0:1999 (Withdrawn)

2106.1:1999 Abel closed cup method


Specifies the Abel closed cup method for determining the flash point of flammable and combustible liquids with flash points between
-30 degrees Celsius and 70 degrees Celsius. This Standard is identical with and has been reproduced from ISO13736:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

2106.2:1999 (Withdrawn)

2106.3:1999 (Withdrawn)

2106.4:1999 (Withdrawn)

2106.5:1999 (Withdrawn)

2106.6:1999 (Withdrawn)

AS/NZS 2107:2000 Acoustics - Recommended design sound levels and reverberation times for building
interiors
Recommends design sound levels and reverberation times for different areas of occupancy in various categories of buildings.
Specifies methods of measuring the ambient sound level reverberation time. This Standard is intended for use in assessing the
acoustic performance of buildings and building services. It does not apply to the evaluation of occupancy noise.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 2108.1:1997 (Withdrawn)

NZS 2110:1966 (Withdrawn)

NZS/ISO 2111, 2628, 2629:1973 (Withdrawn)

AS/NZS 2111:- Textile floor coverings - Tests and measurements

2111.0:1996 Introduction and list of methods


Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

2111.1:1996 Method 1: Machine-made textile floor coverings - Determination of total thickness


Identical to ISO 1765:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.2:1996 Method 2: Determination of thickness loss under dynamic loading


Identical to ISO 2094:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

2111.3:1996 Method 3: Determination of mass per unit area


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.4:1996 Method 4: Determination of surface pile mass above the substrate


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

2111.5:1996 Method 5: Determination of thickness of pile above the substrate


Identical to ISO 1766:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.6:1996 Method 6: Determination of tuft length of pile


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.7:1996 Method 7: Determination of loop length of pile


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

2111.9:1996 Method 9: Determination of the number of tufts per unit length and per unit area
Identical to ISO 1763:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.11:1996 Method 11: Determination of total pile mass per unit area by complete dissection
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

2111.13:1996 Method 13: Determination of total thickness loss after brief, moderate static loading
Identical to ISO 3415:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2111.14:1996 Method 14: Determination of total thickness loss after prolonged, heavy static loading
Identical to ISO 3416:1986.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2111.15:1996 Method 15: Determination of tuft withdrawal force


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2111.16:1996 Method 16: Determination of bond strength between backing components


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.17:1996 Method 17: Determination of thickness, compression and recovery characteristics


Technically equivalent to BS 4098:1975.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

2111.18:1997 Method 18: Burning behaviour - Tablet test at ambient temperature


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2111.19:- Method 19: Colourfastness tests

2111.19.1:1996 Method 19.1: Rubbing


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2111.19.2:1996 Method 19.2: Shampoo solution


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

2111.20:1996 Method 20: Rectangular textile floor coverings - Determination of dimensions


Identical to ISO 3018:1974.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

2111.21:1996 Method 21: Non-destructive measurements of pile thickness above the backing - WRONZ
gauge method
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 2112:1966 (Withdrawn)

NZS 2119:1966 (Superseded by NZS/AS 1161)

AS/NZS 2119:1997 Textile floor coverings - Machine-made - Sampling and cutting specimens for physical
tests
Specifies sampling procedures to be used when testing carpets and other types of textile floor coverings.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2122:- Methods of test for determining combustion propagation characteristics of plastics

2122.2:1999 Determination of minimum oxygen concentration for flame propagation following top
surface ignition of vertically orientated specimens
Sets out a method for the determination of minimum oxygen concentration in an upward flowing mixture of oxygen and nitrogen that
will just support flame propagation. The method is applicable to physically self-supporting plastics, cellular plastics (flexible or rigid),
and film or thin sheet. A statistical method is used in the determination of the end point.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

NZS 2130:1967 (Withdrawn)

AS/NZS 2130:1998 Cots for day nursery, hospital and institutional use - Safety requirements
Specifies requirements for cots for day nursery, hospital and institutional use. These requirements include material, design,
construction, performance, labelling and marking, all relating to safety of the child within the cot. The Standard applies to cots
constructed of metal or plastic, but not timber cots due to the nature of the intended environment and the need for ease of cleaning.
The Standard does not specify requirements for folding cots.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2139:1967 (Superseded by NZS 4512:2003)

NZS/AS 2140:1978 (Withdrawn)

NZS/AS 2141:1978 (Withdrawn)

AS/NZS 2144:2002 Traffic signal lanterns


Specifies requirements for the design, construction and performance of traffic signal lanterns that use either incandescent, or light
emitting diode (LED) light sources and are intended to control the movement of vehicles, including bicycles, and pedestrians. It does
not apply to the control equipment that may be necessary for the functioning of the lanterns.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 65 pages
NZS 2150:1968 (Withdrawn)

NZS 2153:1967 (Withdrawn)

AS/NZS 2153:- Tractors and machinery for agriculture and forestry - Technical means for ensuring safety

2153.1:1997 General
Specifies requirements for the design of tractors and machinery for agriculture and forestry regarding the prevention of accidents
arising from the use of such tractors and machinery. Also provides the technical means for improving the level of personal safety for
operators and users of tractors and machinery for agriculture and forestry. This Standard is identical with and has been reproduced
from ISO 4254-1:1989.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

2153.3:1997 Tractors
Specifies requirements regarding the prevention of accidents arising from the use of tractors by indicating the appropriate
parameters to be met when designing tractors. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and
has been reproduced from ISO 4254-3: 1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

2153.4:1997 Forestry winches


Specifies safety requirements for winches used on forestry machinery and agricultural machinery used in forests. Additional to the
requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from ISO 4254-4: 1990.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2153.5:1997 Power-driven soil-working equipment


Specifies special requirements to be met when designing tractor-operated, power-driven soil-working equipment having a power
requirement of more than 20 kW. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been
reproduced from ISO 4254-5:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

2153.6:1998 Equipment for crop protection


Specifies the special requirements to be considered when designing power-assisted sprayers for crop-protection and liquid fertilizer
application which are mounted, trailed or self-propelled. It is additional to the general requirements of AS/NZS 2153.1. This Standard
is based on but not equivalent to and reproduced from ISO 4254-6:1995.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2153.7:1997 Combine harvesters, forage and cotton harvesters


Specifies requirements for the prevention of accidents arising from the use of combine harvesters and self-propelled forage and
cotton harvesters. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from
ISO 4254-7: 1995.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

2153.9:1997 Equipment for sowing, planting and distributing fertilizers


Specifies technical means of improving the level of personal safety of operators and others involved during normal operation and
maintenance of equipment for sowing, planting and distributing fertilizers. Additional to the requirements of AS/NZS 2153.1. This
Standard is identical with and has been reproduced from ISO 4254-9:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

NZS 2154:1967 (Superseded by AS/NZS 2310)

AS/NZS 2161:- Occupational protective gloves

2161.1:2000 Selection, use and maintenance


Sets out guidance on the selection, use and maintenance of various types of gloves, especially those specified in the other parts of
the AS/NZS 2161 series. Discusses different hazards specific to hands and arms, as well as possible risks in the workplace, and
various methods of control.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2161.2:2005 General requirements


Specifies the general requirements for glove construction, high visibility, innocuousness, cleaning, comfort and efficiency, marking
and information applicable to occupational protective gloves. The Standard is also applicable to gloves permanently incorporated in
containment enclosures. Identical with and reproduced from EN 420:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 36 pages

2161.3:2005 Protection against mechanical risks


Specifies the performance requirements for protective gloves with regard to abrasion, blade cut, puncture, tear and impact cut.
Identical to and reproduced from EN 388:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

2161.4:1999 Protection against thermal risks (heat and fire)


Specifies requirements for gloves for protection against heat and flames in one or more of the following forms: fire, contact heat,
convective heat, radiant heat, small splashes or large quantities of molten metal. This Standard is identical with and has been
reproduced from EN 407:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

2161.5:1998 Protection against cold


Specifies the performance requirements and test methods for gloves which are intended to protect against convective or conductive
cold down to temperatures of 50 degrees C. This could be linked to either the climatic conditions or occupational activity concerned.
This Standard is technically equivalent to and reproduced from EN 511:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

2161.7:- Protection against cuts and stabs by hand knives

2161.7.1:1998 Chainmail gloves and arm guards


Specifies requirements for the design, penetration resistance, ergonomic characteristics, weight, material, marking and instructions
for use of gloves and arm guards. This Standard is identical with and has been reproduced from BS EN 1082-1:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

2161.7.2:2005 Gloves and arm guards made of material other than chainmail
Specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves,
arm guards and protective sleeves made of materials other than chainmail and rigid metal and plastics. Identical to ISO 13999-
2:2003.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

2161.7.3:2005 Impact cut test for fabric, leather and other materials
Specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm
guards. Identical to ISO 13999-3:2002.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

2161.8:2002 Protection against ionizing radiation and radioactive contamination


Specifies requirements for protective gloves against ionizing radiation and radioactive contamination. This Standard is identical with
and has been reproduced from EN 421:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

2161.9:2002 Method of measurement and evaluation of the vibration transmissibility of gloves at the
palm of the hand
Specifies test methods and evaluation criteria for the vibration transmissibility of gloves at the palm of the hand. This joint Standard is
identical with and reproduced from ISO 10819:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 8 pages

2161.10:- Protective gloves against chemicals and micro-organisms

2161.10.1:2005 Terminology and performance requirements


Provides users and manufacturers with a common terminology and a set of performance requirements for gloves intended to be
used against chemicals and biological contaminants. Identical to and reproduced from EN 374-1:2003.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

2161.10.2:2005 Determination of resistance to penetration


Provides users and manufacturers with a method for testing gloves against leakages of air or water, so that such gloves are likely to
provide a barrier to biologically hazardous material. Identical to and reproduced from EN 374-2:2003.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

2161.10.3:2005 Determination of resistance to permeation by chemicals


Provides users and manufacturers with a method for testing gloves to determine resistance to permeation by non-gaseous chemicals
under conditions of continuous contact. Identical to and reproduced from EN 373-3:2003.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 2172:2003 Cots for household use - Safety requirements


Specifies material, construction and design requirements for cots as well as performance criteria, and labelling and marking
requirements, all of which are related to the child's safety while in the cot. Timber folding cots are required by AS/NZS 2195 to meet
some parts of this Standard.
Reprinted to incorporate Amendment 1 :2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2174:1967 (Withdrawn)

AS/NZS 2176:- (Withdrawn)

AS/NZS 2179:- Specifications for rainwater goods, accessories and fasteners

2179.1:1994 Metal shape or sheet rainwater goods, and metal accessories and fasteners
Specifies both performance and prescriptive requirements for a limited range of nominal sizes for metal shape or sheet rainwater
goods, and metal accessories and fasteners made of aluminium alloys, aluminium/zinc alloy-coated steel, copper and copper alloys,
zinc-coated steel, stainless steel and zinc. The Appendices include purchasing guidelines and test methods for demonstrating
compliance with the performance requirements.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

2179.2(Int):1998 (Interim standard: Withdrawn May 2004)

AS/NZS 2195:1999 Folding cots - Safety requirements


Specifies functional, durability, stability and performance criteria related to child safety for folding portable cots constructed of metal,
plastic, fabric (mesh) or timber. It is applicable to cots which can be readily dismantled or folded for transportation and are intended
to be used as a temporary facility for children. It is not applicable to cots intended for permanent household use nor to cradles.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

NZS 2200:1967 (Withdrawn)


NZS/AS 2201:- Intruder alarm systems

2201.1:2007 Client's premises - Design, installation, commissioning and maintenance


Sets out requirements for the construction, operation, performance and installation of intruder alarm equipment and systems installed
in client`s premises, up to and including alarm equipment and outgoing signalling facilities. Operating and maintenance procedures
including administration of records are also included.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 44 pages

2201.2-1992 Central stations


Sets out requirements for central stations, satellite repeater stations, proprietary, and other remote stations for intruder alarm
systems, lines between intruder alarm systems and such stations, and procedures for grading and classifying central stations and
signalling systems.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 16 pages

2201.4-1990 Wire-free systems installed in client`s premises


Specifies requirements for classification, construction, installation and operation of wire-free intruder alarm systems, installed in
client`s premises where the principal interconnections are by wire-free links, using electromagnetic radiation or sound to transmit
telemetry or telecommand signals between component parts. Also provides guidance for system selection and signal reception.
Reprinted to incorporate Amendment 1:1990
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 6 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)

2201.5:2008 Alarm transmission systems


Provides a rating system for alarm transmission systems, equipment and systems using dedicated paths, switched networks and
wire-free systems to ensure appropriate security systems are applied.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

NZS 2205.1-1968 (Superseded by AS/NZS 4898:1997)

NZS 2206:1968 Specification for bare hard-drawn copper conductors for overhead power lines
Applies to stranded conductors (having not fewer than seven strands) and specifies materials, dimensions, electrical and mechanical
properties and tests.
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

NZS 2207:1968 (Superseded by AS/NZS 3108)

AS/NZS 2208:1996 Safety glazing materials in buildings


Specifies the functional properties of various safety glazing materials, including toughened glass, laminated glass, wired glass,
organic-coated glass and plastic. Two grades are covered, with different impact performance levels. Other requirements include size
tolerances, weathering and ageing performance. Test methods are given in some appendices, while others deal with sampling,
acceptance procedures and notes on safe performance criteria and human dynamics data.
Reprinted to append Amendment 1:1999
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2210:1968 (Withdrawn)

AS/NZS 2210:- Occupational protective footwear

2210.1:1994 Guide to selection, care and use


Provides users and purchasers of occupational protective footwear with recommended practices for the selection care and use of
protective footwear in a wide range of primary, secondary and construction industries. Guidance for footwear care, fitting and foot
protection programmes is provided.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

2210.2:2000 Requirements and test methods


Specifies requirements and where appropriate test methods to establish conformity with these requirements for footwear intended to
protect the wearer's feet against foreseeable hazards in a variety of workplaces. This Standard has been reproduced from ISO 8782-
1:1998 with additional requirements for Australia and New Zealand in an Appendix.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 73 pages

2210.3:2000 Specification for safety footwear


Specifies, by reference to AS/NZS 2210.2, basic and additional (optional) requirements for safety footwear. This Standard has been
reproduced from ISO 8782-2:1998 with additional requirements for Australia and New Zealand in an Appendix.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2210.4:2000 Specification for protective footwear


Specifies, by reference to AS/NZS 2210.2, basic and additional (optional) requirements for protective footwear. This Standard has
been reproduced from ISO 8782-3:1998 with additional requirements for Australia and New Zealand in an Appendix.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2210.5:2000 Specification for occupational footwear


Specifies, by reference to AS/NZS 2210.2, basic and additional (optional) requirements for occupational footwear. This Standard has
been reproduced from ISO 8782-4:1998 with additional requirements for Australia and New Zealand in an Appendix.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2210.6:2001 Additional requirements and test methods


Specifies, by reference to AS/NZS 2210.2:2000, additional requirements and test methods. This Standard has been reproduced from
ISO 8782-5:2000 with modifications for application in Australia in an Appendix.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

2210.7:2001 Additional specifications for safety footwear


Specifies, by reference to AS/NZS 2210.2:2000 and AS/NZS 2210.3:2000, additional requirements for safety footwear. This
Standard is identical with and has been reproduced from ISO 8782-6:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 7 pages

2210.8:2001 Additional specifications for protective footwear


Specifies, by reference to AS/NZS 2210.2:2000 and AS/NZS 2210.4:2000, additional requirements for protective footwear. This
Standard is identical with and has been reproduced from ISO 8782-7:2000.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2210.9:2001 Additional specifications for occupational footwear


Specifies, by reference to AS/NZS 2210.2:2000 and AS/NZS 2210.5:2000, additional requirements for occupational footwear. This
Standard is identical to and has been reproduced from ISO 8782-8:2000.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2211:- Laser safety

2211.1:2004 Equipment classification, requirements and user's guide


Provides minimum requirements and specific guidance for the safe operation and maintenance of lasers and laser systems. The
MPE (maximum permissible exposure) values of this Standard were developed for laser radiation other than for the purpose of
medical treatment. Modified adoption of, and reproduced from, IEC 60825-1:2001.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 111 pages

2211.1, Supplement 1:1999 (Superseded by AS/NZS 2211.10:2004)

2211.2:2006 Safety of optical fibre communication systems (OFCS)


Provides requirements and information on the safe operation of end maintenance of optical fibre communication systems (OFCS).
Identical to and reproduced from IEC 60825-2:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages

2211.3:2002 Guidance for laser displays and shows


Provides guidance on the planning and design, set-up and conduct of laser displays and shows that use high power lasers. This
Standard is identical with and has been reproduced from IEC 60825-3:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

2211.4:2002 Laser guards


Provides requirements for laser guards, permanent and temporary, that enclose the process zone of a laser processing machine,
and specifications for proprietary laser guards. This Standard is identical with and has been reproduced from IEC 60825-4:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

2211.5:2006 Manufacturer’s checklist for AS/NZS 2211.1


Provides manufacturers of laser products and their agents with a checklist to ensure that each new or modified design complies with
the requirements of AS/NZS 2211.1. Identical to and reproduced from IEC/TR 60825-5:2005.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

2211.6:2002 Safety of products with optical sources, exclusively used for visible information
transmission to the human eye
Provides an adapted hazard categorization scheme and specific guidance for the safe use of visible optical sources that are used
exclusively for transmission of information to the human eye. This Standard is identical with and has been reproduced from IEC TS
60825-6:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

2211.7:2002 Safety of products emitting infrared optical radiation, exclusively used for wireless free air
data transmission and surveillance
Provides requirements and specific guidance for the safe use of products which emit infrared optical radiation, where such products
are used exclusively for wireless free air data transmission and surveillance. This Standard is identical with and has been
reproduced from IEC TS 60825-7:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

2211.9:2002 Compilation of maximum permissible exposure to incoherent optical radiation


Provides requirements for Maximum Permissible Exposure (MPE) values for the exposure of the human eye and skin to incoherent
optical radiation from artificial sources in the wavelength range from 180 nm to 3000 nm. This Standard is identical with and has
been reproduced from IEC TR 60825-9:1999.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

2211.10:2004 Application guidelines and explanatory notes to AS/NZS 2211.1


Provides information on the physics relating to the dangers posed by laser products. It complements, but does not replace, the
information in AS/NZS 2211.1 by explaining the underlying principles. An adoption with modifications of IEC TR 60825-10:2002.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 35 pages

2211.12:2006 Safety of free space optical communication systems used for transmission of information
Provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point
or point-to-multipoint free space optical data transmission. This Standard only addresses the open beam portion of the system.
Identical to and reproduced from IEC 60825-12:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

NZS 2218:1968 (Withdrawn)

AS/NZS 2229:2004 Fuel dispensing equipment for explosive atmospheres


Specifies general requirements in respect of the design, construction, marking and testing of dispensing equipment for flammable
liquids, LP gas and CNG. It is intended for the guidance of manufacturers, users, statutory authorities and associated interests.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2230:1999 New pneumatic tyres for light trucks and trucks/buses
Specifies requirements for physical dimensions, performance and marking for new pneumatic light truck and truck/bus tyres
designed primarily for on-road use.
Cited in Land Transport Rule 32013
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

NZS 2234:1968 (Withdrawn)

NZS 2235:1968 (Withdrawn)

AS/NZS 2243:- Safety in laboratories

2243.1:2005 Planning and operational aspects


Specifies requirements, recommendations and general guidelines to promote safety in laboratories. Covers laboratory planning,
safety and emergency management for laboratories and general safety precautions relevant to a wide range of laboratories.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 44 pages

2243.2:2006 Chemical aspects


Provides information, recommendations and procedures involving the use of chemicals which will promote safe working in
laboratories.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 52 pages

2243.3:2002 Microbiological aspects and containment facilities


Specifies requirements and gives recommended practices relating to safety in laboratories in which microorganisms are handled.
Includes descriptions of risk group categories for microorganisms and requirements for facilities of corresponding containment levels.
Reprinted to incorporate Amendment 1:2003
Cited in Hazardous Substances and New Organisms (Low Risk Genetic Modification) Regulations 2003
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 99 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

2243.5:2004 Non-ionizing radiations - Electromagnetic, sound and ultrasound


Specifies requirements and recommendations to prevent accidents in laboratories when using equipment generating non-ionizing
radiations including sound and ultrasound.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

2243.8:2006 Fume cupboards


Specifies safety requirements for laboratory fume cupboards and test methods to determine their performance. Siting and
maintenance requirements are specified and requirements and guidance for the use of fume cupboards are included.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 64 pages

2243.9:2003 Recirculating fume cabinets


Specifies requirements and recommendations for the design, manufacture, selection and use of recirculating fume cabinets
(sometimes referred to as 'ductless fume cupboards') for use in laboratories. Includes test methods to determine their performance.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

2243.10:2004 Storage of chemicals


Specifies procedures and requirements for the segregation and storage of chemicals in laboratories and stores associated with
laboratories.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

NZS 2246:1969 Methods for the chemical analysis of liquid milk and cream
Provides methods for the sampling and chemical analysis of liquid milk and cream. Covers the determination of fat (Rose-Gottlieb
method), total solids casein and total nitrogen, lactose, chloride, ash and titratable acidity.
$34.95+GST (Members), $43.69+GST (Retail), 24 pages

NZS 2247:1968 (Superseded by AS/NZS 3108)

NZS 2251:1969 (Withdrawn)

NZS 2264:1970 Specification for industrial safety helmets (maximum protection)


Sets out requirements for industrial safety helmets which offer the highest level of head protection currently known and which are
intended for use in industries where potential hazards of head injury are high and the continuous wearing of protective helmets is
necessary.
Reconfirmed in 1990; Reprinted to append Amendment 1:1974 and Amendment 2:1981
$34.95+GST (Members), $43.69+GST (Retail), 21 pages
Amendment 1, 1974 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1981 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2265:1969 (Withdrawn)

AS/NZS 2269 Plywood - Structural

AS/NZS 2269.0:2008 Specifications


Specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and
surface grades are also provided.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 40 pages

AS/NZS 2269.1:2008 Determination of structural properties - Test methods


Specifies test methods for evaluating the mechanical properties of structural plywood in both panel dimensions, that is, parallel to
and perpendicular to the grain of the face veneer.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 2269.2:2007 Determination of structural properties - Evaluation methods


Specifies a parametric method of calculation based on lognormal distribution for determining the mean and 5th percentile values for
structural plywood from test results generated in accordance with AS/NZS 2269.1. Non-parametric methods may also be used.
Based on EN 1058 and prEN 14358.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 12 pages

AS/NZS 2270:2006 Plywood and blockboard for interior use


Provides minimum performance requirements and specifications for appearance and non-appearance grades of plywood and
blockboard acceptable for use in fully protected interior applications in Australia and New Zealand. Describes the basic interior
plywood and blockboard product. Particular end uses may require additional processing, immunization or surface finishing.
Reprinted to incorporate Amendment 1 :2007
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 2271:1969 (Withdrawn)


AS/NZS 2271:2004 Plywood and blockboard for exterior use
Specifies veneer and core strip qualities, bond quality, jointing requirements, panel construction, dimensional tolerances, moisture
content, finishing and bonding. Two bond types are specified, i.e., types A and B, which are suitable for exterior applications.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2272:2006 Plywood - Marine


Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use. It describes the basic marine
plywood product. Particular applications may require additional processing, preservative treatment or surface finishing. Also
specifies species of timber, veneer qualities, bond quality, joints, veneer construction, moisture content, dimensions and tolerances,
finishing, formaldehyde emissions and branding. A series of performance requirements relating to species, and a procedure for
evaluating and admitting new species are included. One bond type, Type A bond, is prescribed. Two face veneer grades A and O
have been specified. Quality A veneer is to be specified where a high quality clear finish is required and Quality O where the marine
plywood product is to be overlaid with fibreglass or similar coatings or overlays, or painted with a pigmented paint or varnish.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

NZS 2274:1969 (Withdrawn)

AS/NZS 2276:- Cables for traffic signal installations

2276.1:2004 Multicore power cables


Specifies requirements for PVC insulated and sheathed underground multicore power cables rated at 0.6/1 kV for the
interconnection of traffic signal posts and associated control equipment.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 11 pages

2276.2:1998 Feeder cables for vehicle detectors


Specifies requirements for screened, twisted balanced-twin feeder cable, intended for use in traffic signal installations for the
interconnection of vehicle detector equipment and inductive type vehicle detector loops.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

2276.3:2002 Loop cable for vehicle detectors


Specifies the requirements for single core cables intended for the construction of inductive vehicle-detector loops for traffic signal
installations, suitable for installation in slots cut into road surfaces.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

NZS/AS 2277-1994 Paper for MICR encoded documents


Sets out requirements for both watermarked and un-watermarked paper specifically manufactured for use by the banking industry to
enable encoded documents to be satisfactorily processed in multiple passes through high-speed MICR reader-sorter equipment.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 3 pages

AS/NZS 2280:2004 Ductile iron pipes and fittings


Specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and
including DN 750, which are intended primarily for conveying water under pressure, but which may be used for conveying sewage or
other liquids. Pipes and fittings are classified on the basis of the allowable operating pressure.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 61 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2286:2001 Space heaters - Secondary guards


Specifies requirements for guards suitable for use with domestic heating appliances to prevent prolonged contact by persons in the
vicinity.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

AS/NZS 2290:- Electrical equipment for coal mines - Introduction and maintenance

2290.1:2005 For hazardous areas


Specifies requirements for the introduction, examination, maintenance, in situ repair and allowable modifications to electrical
equipment designed for use in hazardous areas in and around underground coal mines. Details methods of examination,
maintenance and testing required to ensure safety, compliance with relevant standards, and trouble-free operation while the
equipment is in service.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

AS/NZS 2293 Emergency evacuation lighting for buildings

AS/NZS 2293.1:1998 (Withdrawn)

AS/NZS 2293.2:1995 Inspection and maintenance


Sets out periodic inspection and maintenance procedures for emergency evacuation lighting systems for buildings. The procedures
are intended to ensure that such systems will be in a state of readiness for operation at all times. Requirements apply to the central
and single-point emergency lighting systems, as defined in AS/NZS 2293.1.
Reprinted to incorporate Amendment 1:1998 and Amendment 2:2008
Cited in BIA Handbook/CS4 and Approved Document F6/AS1
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2293.3:1995 (Withdrawn)

NZS 2295:2006 Pliable, permeable building underlays


Specifies the material property requirements and test methods for pliable and permeable building underlay material to be used for
roofs and walls. This Standard does not include rigid materials used in place of pliable wall or roof underlay, pliable membranes
used as insulation, vapour barriers or foil laminates.
$109.95+GST (Members), $137.44+GST (Retail), 20 pages

AS/NZS 2299:- Occupational diving operations

2299.1:2007 Standard operational practice


Specifies requirements for personnel, equipment and procedures used in occupational underwater operations in up to 50 m depth of
water using compressed air or similar oxygen-nitrogen mixtures as the breathing medium. Also gives details on compression
chamber support, accident reporting and medical requirements for occupational diving operations. Appendices include a suggested
content of an employer’s diving operations manual, metric and imperial decompression tables (with procedures for their use),
guidance on the treatment of decompression illness and guidance for medical practitioners conducting diving medicals.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 168 pages

2299.1, Supplement 1:2007 Diving medical examination forms


A copy of material from Appendix N of AS/NZS 2299.1:2007.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2299.2:2002 Scientific diving


Specifies requirements for personnel, equipment and procedures for diving performed as part of professional scientific research,
natural resource management or scientific research as an educational activity. Appendices include competency of divers and training
requirements, diving operations manual content, hand and lifeline signals, guidance on hazard identification, risk assessment and
control, and exposure to altitude following diving.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 68 pages

2299.3:2003 Recreational industry diving and snorkelling operations


Specifies requirements for personnel, equipment and operational procedures associated with the conduct of recreational diving,
recreational diver training and recreational snorkelling at a workplace. Includes the use of air, other nitrogen/oxygen mixtures and
mixed gases as breathing media, the use of rebreather units and the conduct of decompression diving.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 40 pages

2299.4:2005 Film and photographic diving


Specifies requirements for the personnel, equipment and procedures used in occupational underwater operations associated with
the production, for commercial purposes, of feature films, television, natural history visuals, corporate videos and photographic stills,
and is applicable to all persons involved in the production, including producers, directors, cinematographers, gaffers and department
personnel, set construction personnel, underwater technicians, safety divers, stunt people, actors and stills photographers, including
self-employed and freelance operators. Applies to diving in water to depths not exceeding 30 m.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

AS/NZS 2310:2002 Glossary of paint and painting terms


To provide a better understanding of the terminology used in the paint industry, for the use of those involved in the manufacture,
supply, purchase and use of paint, and those involved in the writing of Standards for paints and the framing of painting specifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

AS/NZS 2311:2000 Guide to the painting of buildings


Provides guidelines on products and procedures for the painting of buildings for domestic, commercial and industrial use. Discusses
different material surfaces, paint products, the preparation of unpainted and prepainted surfaces and gives recommendations for
painting systems for new and maintenance work. Includes recommendations for some specialized service applications, guidelines on
the preparation of a paint system specification and discusses inspection and testing protocols.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 104 pages

AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of
protective coatings
Provides guidelines for the selection and specification of coating systems for the short, medium and long term protection of structural
steel work against interior and exterior atmospheric, and non-atmospheric corrosive environments. The following aspects are
covered in detail: Atmospheric environments, planning and design, surface preparation treatments, metallic and paint coatings,
maintenance of coating systems, inspection and testing, and preparation of coating specifications. Contains comprehensive details
of modern paint systems, including properties and typical applications.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 130 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

NZMP 2312:1987 (Superseded by AS/NZS 2312)

NZS/ISO 2330:1974 (Withdrawn)

NZS/AS 2335:1980 (Withdrawn)

AS/NZS 2341:- Methods of testing bitumen and related roadmaking products

AS/NZS 2341.0:2002 General introduction and list of standards


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2341.1:1994 Precision data - Definitions


Defines terms used to express the precision of the test result obtained from a test method, and the terms used in the presentation of
precision data.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 2341.5:1997 Determination of apparent viscosity by "Shell" sliding plate micro-viscometer


Sets out a procedure for the determination of apparent viscosity of bitumens at a specified shear strain rate by means of the "Shell"
sliding plate micro-viscometer.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 2341.10:1994 Determination of the effect of heat and air on a moving film of bitumen (rolling thin film
oven (RTFO) test)
Sets out a treatment of bitumen which is intended to simulate the conditions obtained when the bitumen is used to manufacture hot-
mixed asphalt, and stipulates a procedure for measuring the flow properties of the bitumen before and after the treatment.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 2341.13:1997 Long-term exposure to heat and air


Sets out a method based on the accelerated aging of bitumen to determine the time required for bitumen to reach a viscosity level
associated with distress in pavement surfacings.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 2341.20:1998 Determination of sieve residue for bituminous materials


Sets out a procedure for determining the proportion of bituminous materials which is retained on a test sieve when it is strained
through the mesh with the aid of an appropriate solvent. This method is applicable to liquid road tars, semi-solid road tars and other
bituminous materials.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 2341.21:1995 Sample preparation


Specifies requirements for the preparation of samples of materials as in AS 2008 and unidentified or improperly identified bituminous
materials which may be classified as AMC 5, 6 or 7 in accordance with AS 2157.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 2341.22:1996 Determination of particle charge


Sets out a method for determining the nature of the charge on particles of bituminous emulsion, as indicated by the bitumen
deposited on electrodes to which an electric current is applied.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2341.23:2002 Determination of residue from evaporation


This Standard sets out a method for determining the residue from evaporation of bitumen emulsion.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2341.24:1996 Calculation of non-aqueous volatiles content (by difference)


Sets out a method for calculating the non-aqueous volatiles (NAV) content of bituminous emulsion. Where a flux oil has been
incorporated in the emulsion, the NAV content may be determined by distillation as described in ASTM D 1461.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 2341.26:2002 Determination of sieve residue


This Standard sets out a method for determining the quantity of bituminous emulsion residue that is retained on a specified sieve.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 2341.27:2008 Determination of sedimentation


Sets out a method for determining the degree of sedimentation of a bituminous emulsion on standing undisturbed. It provides a
means of evaluating the tendency for the two phases of an emulsion to separate with time.
Joint Australian/New Zealand Standard
$24.95+GST (Members), $31.19+GST (Retail), 4 pages
AS/NZS 2341.30:1996 Recovery of residue from bituminous emulsion
Sets out a procedure specifically for the recovery of residue from bituminous emulsion for further testing. Where binder content is
required, AS/NZS 2341.23 is preferred.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 2343:1997 Bullet-resistant panels and elements


Specifies the requirements for bullet-resistant panels and elements according to their performance in preventing penetration by
projectiles discharged from firearms under controlled conditions. This Standard applies to transparent, opaque and translucent
panels.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

AS/NZS 2344:1997 (Superseded by NZS 6869:2004)

AS/NZS 2350:- Methods of testing portland and blended cements

2350.0:1999 General introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

2350.1:2006 Method 1: Sampling


Describes the methods to be followed and the provisions to be complied with for taking samples of cement representative of given
lots for testing to assess the quality of products prior to, during or after delivery.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2350.3:2006 Method 3: Normal consistency


Sets out the method for determining the normal consistency of cement.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

2350.4:2006 Method 4: Setting time


Sets out the method for determining the setting time of cement using a paste of normal consistency.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

2350.5:2006 Method 5: Determination of soundness


Sets out the method for determining the soundness of cement using a paste of normal consistency.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2350.8:2006 Method 8: Fineness index by air permeability method


Describes the reference method for determining the fineness index of cement by the air permeability method, expressed in terms of
surface area in square metres per kilogram of cement determined at a temperature of 23 ±2°C.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

2350.11:2006 Method 11: Compressive strength


Sets out the reference method for determining the compressive strength of cement.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

2350.16:2006 Method 16: Determination of air content of masonry cement


Sets out the method for determining the air content of a masonry cement prepared and tested as a standard mortar.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

2350.17:2006 Method 17: Determination of soundness of masonry cement


Sets out the method for determining the soundness of masonry cements using a paste of normal consistency.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

2350.18:2006 Method 18: Determination of water retention of masonry cement


Sets out the method for determining the water retention of a masonry cement prepared and tested as a standard mortar.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS/AS 2352:1980 (Withdrawn)

NZS/AS 2359:- Powered industrial trucks

2359.1-1995 General requirements


Specifies requirements for the design, manufacture, marking and testing of powered industrial trucks and their attachments.
Adopted Standard
$152.28+GST (Members), $190.35+GST (Retail), 84 pages

2359.2-1985 Operation
Prescribes requirements for the operation, maintenance, repair and modification of industrial trucks and their attachments as defined
by AS 1763. An appendix gives guidance on atmospheric contaminants.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 32 pages

2359.3-1995 Counterbalanced fork-lift trucks - Stability tests


Provides basic tests to ensure that a lift truck demonstrates satisfactory stability when appropriately used under normal working
conditions. This Standard is technically equivalent with and has been reproduced from ISO 1074:1991.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 5 pages

2359.4-1995 Reach and straddle fork-lift trucks - Stability tests


Specifies the tests for verification of stability of reach and straddle fork-lift trucks. This Standard is technically equivalent with and has
been reproduced from ISO 3184:1974.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 7 pages

2359.5-1995 (Withdrawn)

2359.6-1995 Safety code


Specifies the safety requirements for the manufacture, application and maintenance of powered industrial trucks. This Standard is
technically equivalent with and reproduced from ISO 3691:1980, including Amendment 1:1983.
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 36 pages

2359.7-1995 Terminology
Sets out classifications and definitions of different powered industrial trucks; terms and definitions of main components are included.
This Standard is identical with and reproduced from ISO 5053:1987.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 15 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

2359.8-1995 Pallet stackers and high-lift platform trucks - Stability tests


Specifies the basic tests for verification of the stability of trucks and stackers with tiltable and non-tiltable masts, platforms or fork
arms. This Standard is identical with and reproduced from ISO 5766:1990.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 8 pages
2359.9-1995 High-lift rider trucks - Overhead guards - Specification and testing
Specifies the requirements and testing for overhead guards designed to protect the operator from falling objects, but not from the
impact of a falling load. This Standard is technically equivalent with and reproduced from ISO 6055:1979, including Erratum:1980.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 2 pages

2359.10-1995 Fork-lift trucks - Hook-on type fork arms - Vocabulary


Specifies the terms relating to hook-on type fork arms for fork-lift trucks. This Standard is identical with and reproduced from ISO
2331:1974.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 4 pages

2359.11-1995 Fork-lift trucks - Hook-on type fork arms and fork carriers - Mounting dimensions
Specifies the interchangeability dimensional characteristics of fork carriers and hook-on type fork arms for fork-lift trucks. This
Standard is identical with and reproduced from ISO 2328:1993.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 3 pages

2359.12-1996 Hazardous areas


Specifies requirements that can be applied to a vehicle, enabling it to operate safely in areas that may be hazardous because of an
explosive gas atmosphere or combustible dusts.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 8 pages

AS/NZS 2366:- Windscreen repairs

2366.1:1999 Repair procedures


Specifies requirements for repair of damage to laminated safety glass windscreens for road vehicles. Prepared to assist windscreen
repairers in their decision to repair a damaged laminated windscreen. It nominates the correct procedures and specifies limits for a
successful repair. It is not intended that it be applied to determine the roadworthiness of a motor vehicle although repairing to the
Standard might extend the life of a damaged windscreen.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

2366.2:1999 Repair systems


Specifies performance requirements to verify the suitability of windscreen repair systems and application windscreen repair
materials, to ensure satisfactory repairs to damaged windscreens.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

AS/NZS 2373:2003 Electric cables - Twisted pair for control and protection circuits
Specifies the requirements for screened polyethylene (PE) insulated twisted pair control cables for voltages up to 0.6/1 kV, including
a support wire for aerial cables, intended for use in control, supervisory, protection and instrumentation circuits. It includes cables
commonly referred to as pilot cables but it does not apply to cables used solely for telecommunication purposes.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 28 pages

2373.1:1995 (Superseded by AS/NZS 5000.3:2003)

NZS/BS PD2379:1990 Register of colours of manufacturers` identification threads for electric cables and cords
Lists colour combinations allocated to cable manufacturers. Includes approval threads of BASEC, CENELEC and CEE.
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 26 pages

AS/NZS 2381:- Electrical equipment for explosive atmospheres - Selection, installation and maintenance

2381.1:2005 General requirements


Specifies general requirements for the selection, installation and maintenance of electrical equipment for use in areas where
flammable materials are generated, prepared, processed, handled, stored or otherwise used, and which are therefore potentially
hazardous.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 88 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

2381.2:2006 Flameproof enclosure 'd'


Specifies requirements for the selection, installation and maintenance of electrical equipment, for use in explosive atmospheres,
which have been certified in accordance with the requirements of type of explosion protection ‘d’. It does not apply to electrical
equipment used in underground mining.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2392:1999 Textiles - Labelling of clothing, household textiles and furnishings


Specifies positions of attachment for permanent labels carrying the brand name, size or dimensions, care instructions, fibre content,
country of origin and, for children's nightwear and some daywear garments, the fire hazard classification. The way in which this
information is to be combined if there is more than one label is detailed.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

AS/NZS 2394:1994 Conditioning equipment for the treatment of nocturnal enuresis (bedwetting)
Specifies requirements for the performance and safety of equipment for use in the conditioning treatment of nocturnal enuresis
(bedwetting). It applies to both battery-powered and mains-powered equipment. This edition references AS 3200.1-1990. It has
been re-written to clarify the issue of resetting equipment.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 2398(Int):1994 (Interim Standard, expired 15 August 1996)

AS/NZS 2399:1998 Acoustics - Specifications for personal sound exposure meters


Specifies acoustical and electrical performance requirements for personal sound exposure meters. Specifications are applicable to
instruments intended to be worn on a person for measurement of A-weighted sound exposure resulting from steady, intermittent,
fluctuating, irregular or impulsive sounds. This Standard is technically equivalent to, and has been reproduced from, IEC
61252:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 2401:- Battery chargers for lead-acid batteries - Domestic type

2401.2:1995 Battery chargers for valve-regulated cells


Specifies requirements for the material, design, testing and performance of battery chargers for domestic or similar use for charging
valve-regulated lead-acid batteries used in cyclic applications, e.g. golf buggies and prawning lights.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 2402P:1987 Code of practice for geothermal heating equipment in Rotorua


This Code is designed to ensure that geothermal energy employed for heating purposes in Rotorua is used safely and without waste.
Controls are placed on the efficiency of the heating equipment, the temperature at which drawoff from the geothermal field may be
discharged, and the thermal losses from pipes and equipment. Intended to provide a means of compliance with the requirements of
the Geothermal Energy Regulations.
Cited in Geothermal Energy Regulations 1961
$84.95+GST (Members), $106.19+GST (Retail), 60 pages

NZS 2403:1991 Code of practice for deep geothermal wells


Applies primarily to wells of between 250 m and 3000 m depth with subsurface conditions up to 350oC. Covers drilling, operation,
maintenance, repair and abandonment and comprises well design, site preparation, drilling equipment, tools, materials and
practices. It includes all subsurface work plus the wellhead up to the top flange of the master valve.
Reprinted to append Amendment 1:1996 & Corrigendum 1:1994
Cited in Geothermal Energy Regulations 1961
$309.95+GST (Members), $387.44+GST (Retail), 96 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)
Corrigendum: 1 1994

AS 2420:1987 (Withdrawn)

AS/NZS 2430:- Classification of hazardous areas

2430.3:- Examples of area classification

2430.3.1:2004 General
Provides examples of area classification and is based on the internationally accepted concept which recognizes the different degrees
of probability with which explosive (flammable) concentrations of flammable gas or vapour may arise in installations in terms of both
the frequency of occurrence and the probable duration of existence on each occasion.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

2430.3.2:2004 Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars
Provides guidance on the classification of areas associated with vehicle workshops, vehicle parking areas, fuel dispensing stations
and aircraft hangars. Includes specific examples of classification for such areas as well as for residential garages and pollution
control equipment. To be read in conjunction with AS/NZS 2430.3.1.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

2430.3.3:2004 Flammable liquids


Provides examples of area classification for areas associated with the production, processing, handling, transferring and storage of
flammable liquids. It is part of the AS/NZS 2430.3 series, which recommends the classification of several commonly occurring
situations and should be read in conjunction with AS/NZS 2430.3.1.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

2430.3.4:2004 Flammable gases


Provides guidance on the classification of areas associated with the production, processing, handling and storage of flammable
liquids and gases in refineries and major processing plants. Includes specific examples of classification for such areas, based on a
generalized method area classification. To be read in conjunction with AS/NZS 2430.3.1.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

2430.3.5:2004 Refineries and major processing plants


Provides examples of area classification for areas associated with the production, processing, handling and storage of flammable
liquids and gases in refineries and major processing plants. It is part of the AS/NZS 2430.3 series which recommends the
classification of several commonly occurring situations and should be read in conjunction with AS/NZS 2430.3.1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

2430.3.6:2004 Laboratories, including fume cupboards and flammable medical agents


Provides guidance on the classification of areas associated with laboratories, fume cupboards and the use of flammable medical
agents. Includes specific examples of classification for such areas. To be read in conjunction with AS/NZS 2430.3.1.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)
2430.3.7:2004 Landfill gas, sewage treatment and sewage pumping plants
Provides guidance on the classification of areas associated with gas recovery, sewage treatment plants and sewage pumping plants.
Includes specific examples of classification for areas basically related to methane occurrences, which can be extended to coal seam
gas recovery and biodigestion of farm wastes. To be read in conjunction with AS/NZS 2430.3.1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

2430.3.8:2004 Surface coatings and adhesives


Provides guidance on the classification of areas associated with the manufacture, storage, handling, testing and sale of surface
coatings and adhesives (classified as manufactured produced and as flammable material in the ADG Code and in the Dangerous
Goods Regulations 1985 - New Zealand). Includes specific examples of classification. To be read in conjunction with AS/NZS
2430.3.1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

2430.3.9:2004 Miscellaneous
Provides guidance on the classification of areas associated with several finishing processes, fruit ripening rooms, several batch-type
processes and ammonia systems. Includes specific examples of classification. To be read in conjunction with AS/NZS 2430.1.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

AS/NZS 2433:1994 Plastics - Method for exposure to ultra-violet lamps


Specifies a simple method of exposure of the surfaces of plastics to artificial ultraviolet radiation without the need for expensive
equipment.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 2438:- Drills and reamers

2438.1:1994 Specification for twist drills


Specifies dimensions and tolerances for parallel shank, jobber, stub, long and extra long series of twist drills, and for Morse taper
shank and Morse taper shank extra long drills. Tables summarize both imperial and metric sizes for each type of drill. Identical with
and reproduced from BS 328.1:1993.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 34 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1996 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2442:- Performance of household electrical appliances - Rotary clothes dryers

2442.1:1996 Energy consumption and performance


Specifies the method for determining performance characteristics, including moisture removal, maximum fabric temperature and
water and energy usage. It sets out minimum acceptable values for some of these characteristics but does not specify safety
requirements. Appendices include specification of the standard test load, required laboratory and equipment conditions and result
recording sheets.
Reprinted to incorporate Amendments 1, 2, 3 & 4.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 31 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1999 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2006 $29.95+GST (Members), $37.44+GST (Retail)

2442.1, Supplement 1:1996 (Withdrawn; use AS/NZS 2442.1, Supplement 6:1998)

2442.1, Supplement 2:1996 (Withdrawn; use AS/NZS 2442.1, Supplement 7:1998)

2442.1, Supplement 3:1996 Energy consumption and performance - Test material - Pillow case
Comprises a pillow case which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1:1996, or clothes washers to AS 2040-1990. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail)

2442.1, Supplement 4:1996 Energy consumption and performance - Test material - Bath towel
Comprises a bath towel which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1:1996, or clothes washers to AS 2040-1990. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail)

2442.1, Supplement 6:1998 Energy consumption and performance - Test material - Double bed sheet
Comprises a double bed sheet which is suitable for inclusion in the standard test load required when testing clothes dryers to
AS/NZS 2442.1, or clothes washers to AS 2040. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail)

2442.1, Supplement 7:1998 (Withdrawn)

2442.1, Supplement 8:2000 Energy consumption and performance - Test material - Undershorts
Comprises undershorts which are suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1 or clothes washers to AS/NZS 2040.1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail)

2442.2:2000 Energy labelling requirements


Provides energy labelling requirements for rotary clothes dryers intended for household and similar use. Transitional aspects of
regulation are addressed.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2007
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2450:1994 Textiles - Natural and man-made fibres - Generic names


Specifies lists and defines natural and man-made fibres. This Standard is based on ISO 2076:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 2451:1998 Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)
Specifies the dimensions for bolts and screws with British Standard Whitworth threads in diameters from 1/4 in to 6 in, and the
material requirements for steel bolts, screws and nuts for general use.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

AS/NZS 2455:- Textile floor coverings - Installation practice

2455.1:2007 General
Sets out requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor
surfaces, together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors
and underlays, and where subfloor heating units are installed. Details of information to be obtained by the contractor are also
specified.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 36 pages

2455.2:2007 Carpet tiles


Sets out requirements for installing carpet tiles by the grid and perimeter adhesion system, the double-bond system and the pressure
sensitive system.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 16 pages

NZS/BS 2457:1975 (Withdrawn)

AS/NZS 2460:2002 Acoustics - Measurement of the reverberation time of rooms


Specifies methods for the measurement of reverberation time in rooms. This Standard applies to any room in which reverberation
time is an important factor affecting the quality of sound in the room, or where reverberation control is used for noise control
purposes.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 2465:1999 Unified hexagon bolts, screws and nuts (UNC and UNF threads)
Specifies the dimensions for unified hexagon bolts, screws and nuts (UNC and UNF threads) in diameters from .25 in to 1.5 in, and
the material requirements for steel bolts and screws of strength grades 5 and 8 and for nuts of strength grades 5 and 8.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 2479:1987 (Withdrawn)

AS/NZS 2485:1995 Medical equipment - Single use, winged intravenous devices (sterile) for general use
Specifies requirements for sterilized winged devices, generally known as `scalp vein units,` for intravenous use. Appendices include
methods of test for biological, chemical and physical requirements.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 39 pages

AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications


Specifies requirements for cross-linked polyethylene pipes for the conveyance of fluids under pressure. Such fluids include, but are
not restricted to, water, wastewater, slurries, compressed air, and fuel gas. Fuel gas includes natural gas, liquefied petroleum gas
(LPG) in the vapour phase and LPG/air mixtures. The partial pressure of the LPG is not to exceed 300 kPa absolute.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 32 pages

NZS/BS 2494:1990 (Withdrawn)

AS/NZS 2496:1995 Breathing attachments for anaesthetic purposes for human use
Specifies basic requirements for breathing attachments for anaesthetic apparatus, including the sequence and dimensions of cone
and socket joints (conical fittings) of 15 mm, 19 mm, 22 mm, 23 mm and 30 mm sizes, used for adult and paediatric purposes.
Dimensions and form of screw-threaded, weight-bearing connections for use with attachments for anaesthetic apparatus and
ventilators are also specified.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

AS/NZS 2499:2000 Acoustics - Measurements of sound insulation in buildings and of buildings elements -
Laboratory measurement of room-to-room airborne sound insulation of a suspended
ceiling with a plenum above it
Provides a laboratory method of measurement the airborne sound insulation of a suspended ceiling with a plenum of defined height
mounted above an acoustical barrier which separates two rooms of a specified test facility. This Standard has been adopted with
national modifications and reproduced from ISO 140-9:1985.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

AS/NZS 2500:2004 Guide to the safe use of electricity in patient care


Provides a guide to the safe use and application of electricity operated equipment used in health care. In addition to providing
protection against electric shock to patients and staff, provision to safeguard against hazards such as thermal, radiant and
mechanical, are also included. Measures required to provide and maintain patient and operator safety, including specification of the
class of equipment and electrical installation to be employed for particular medical procedures, are also included.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 72 pages

AS/NZS 2512:- Methods of testing protective helmets

2512.1:1998 Definitions and headforms


Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

2512.2:2006 General requirements for the conditioning and preparation of test specimens and
laboratory conditions
Sets out the conditioning procedures for protective helmets that are to be tested, the ways in which the helmets are prepared for
testing, and the laboratory conditions for testing.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

2512.3:- Determination of impact energy attenuation

2512.3.1:2007 Helmet drop test


Sets out a method for determining the impact energy attenuation of a protective helmet. This revision is to incorporate changes to the
specification of headform materials in Clause 5.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 8 pages

2512.3.2:1997 Striker drop test


Sets out a method for determining the impact energy of a helmet, temple protector or faceguard, intended for use in a sport where
there is danger of being injured by a ball or puck.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 6 pages

2512.4:1998 Determination of penetration resistance


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

2512.5:- Determination of strength of retention system

2512.5.1:2008 Static strength


Sets out a method for determining the static strength of the retention system of a protective helmet. The method applies to each
individual component of a system in which the components can be independently fastened without securing the complete assembly.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 4 pages

2512.5.2:1998 Dynamic strength


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2512.6:2006 Measurement of horizontal peripheral vision clearance


Sets out a method for measuring the horizontal peripheral vision clearance of a helmet.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

2512.7:- Determination of stability of protective helmets

2512.7.1:2006 Static stability


Sets out a method for determining the stability of a protective helmet on a test headform under static load.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

2512.7.2:1998 Dynamic stability


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2512.8:2006 Measurement of peak deflection


Sets out a method for measuring the deflection under load of peaks on protective helmets.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

2512.9:2006 Determination of load distribution


Sets out a method for determining the ability of a protective helmet to distribute the force of an impact.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

NZS/AS 2513-1982 Electrical connectors for trailer vehicles


In two parts specifies design, construction and performance requirements and configurations and dimensions for three types of 7-pin
connectors for making detachable connections between vehicles (both private and commercial) and trailers fitted with 6 V, 12 V, and
24 V systems. Future 12-pin connectors are covered only to the extent that functions are allocated to pin numbers, and compatibility
with the same type of 7-pin connector is specified. Based on ISO 4091, with some changes.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 16 pages

AS/NZS 2535:- Test methods for solar collectors

2535.1:2007 Thermal performance of glazed liquid heating collectors including pressure drop
Establishes methods for determining the thermal performance of glazed liquid heating solar collectors. It provides test methods and
calculation procedures for determining the steady-state and quasi-steady-state thermal performance of solar collectors. The
Standard is technically equivalent to and has been reproduced from ISO 9806-1:1994.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 80 pages

NZS/AS 2536:1982 (Withdrawn)

NZS/AS 2537-1994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and
cold water applications
Specifies requirements for mechanical jointing fittings suitable for use as fixed joints, with cross-linked polyethylene (PE-X) pipes
manufactured in accordance with AS 2492.
Adopted Standard
$89.20+GST (Members), $111.50+GST (Retail), 26 pages

AS/NZS 2538:2004 Vehicle support stands


Specifies requirements for the design, construction, performance and labelling of vehicle support stands.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 24 pages

AS/NZS 2541:1998 Guide to the cleaning-in-place of dairy factory equipment


Provides guidance for the implementation and efficient operation of CIP systems in the dairying industry. Basic principles and the
recommended procedures established by practice have been outlined. Applies to all cleaning operations where equipment is cleaned
by use of circulating liquids rather than by manually scrubbing.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

AS/NZS 2544:1995 Grey iron pressure fittings


Specifies requirements for grey iron pressure fittings of nominal sizes up to and including DN 600, intended primarily for the
conveyance of water under pressure. One class of fitting is specified, suitable for a variety of jointing systems.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

AS/NZS 2550:- Cranes - Safe use


2550.9:1996 Vehicle hoists
Specifies the requirements for the safe use of vehicle hoists as defined in AS 2549. It includes sections on planning, selection,
siting, operation and maintenance, inspection and repair. Appendices provide examples of an inspection and testing certificate, and
a typical logbook format. It is intended for use with AS 2550.1 and AS/NZS 1418.9 which specifies the design and installation
requirements for vehicle hoists.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 2554:1998 Hose and hose assemblies for air


Specifies requirements for hose and hose assemblies for use with compressed air, and having maximum working pressures of up to
2.5 MPa.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 2557:1999 (Superseded by AS/NZS CISPR 12:2004)

AS/NZS 2566:- Buried flexible pipelines

2566.1:1998 Structural design


Specifies a practice for the structural design of buried flexible pipelines which rely upon side support to resist vertical loads. The
practice applies to pipes with outside diameters equal to or greater than 75 mm, initial ring-bending stiffness equal to or greater than
1250 N/m/m and long-term ring-bending stiffness equal to or greater than 625 N/m/m.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

2566.1, Supplement 1:1998 Structural design - Commentary (Supplement to AS/NZS 2566.1:1998)


Gives helpful background information to AS/NZS 2566.1 and emphasizes the need for field compaction of the embedment material
to be consistent with assumptions on which the equations are based. Appendix B gives worked examples which illustrate the
application of AS/NZS 2566.1 for the selection of an appropriate pipe material and class of pipe.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 34 pages

2566.2:2002 Installation
Specifies requirements for the installation, field testing and commissioning of buried flexible pipelines with structural design in
accordance with AS/NZS 2566.1.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 85 pages

AS/NZS 2571:1993 (Withdrawn)

AS/NZS 2572:1994 (Withdrawn)

NZS/BS 2573:- Rules for the design of cranes

Part 1:1983 Specification for classification, stress calculations and design criteria for structures
Gives a base for computing stresses in crane structures and permissible stresses for steels to BS 4360. Covers classification based
on severity of intended use of load to be considered, selection of steel, minimum thickness of plates and sections, working stresses,
basic stresses in joint fastenings, web plates and stiffeners and fluctuating loads. Appendices give classification, use of steels of
higher tensile strength than those to BS 4360, effective lengths of jibs, basic formulae, design checks, and fatigue strength of
structural components.
Adopted Standard
$484.85+GST (Members), $606.06+GST (Retail), 74 pages

Part 2:1980 Specification for classification, stress calculations and design of mechanisms
Classification of mechanisms for all types of cranes based on severity of intended use, loads and load combinations, calculation of
stresses, stresses in components and the selection and verification of proprietary items. Appendices give classifications normally
associated with different types of cranes, assessment of torque and determination of fatigue reference stresses.
Reprinted incorporating Amendments 1 & 2
Adopted Standard
$345.45+GST (Members), $431.81+GST (Retail), 24 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2576:2005 Welding consumables for build-up and wear resistance


Specifies requirements for welding consumables for build-up and wear resistance.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2588:1998 Gypsum plasterboard


Specifies sizes, tolerances and performance requirements for gypsum plasterboard. Test methods are given in Appendices.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

AS/NZS 2589:2007 Gypsum linings - Application and finishing


Provides manufacturers and users of gypsum linings with specifications covering the application and finishing of linings in residential
and commercial construction applications. This Standard provides a reference for the building industry and specifiers, and a basic
standard for adoption in contracts.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 72 pages

NZS/AS 2592-1983 Gypsum plaster for building purposes


Applies to gypsum plasters for general use in building, including plaster for the manufacture of fibrous plaster products, gypsum
plasterboard and glass fibre reinforced gypsum plaster. The composition and physical properties are specified and methods are
included for sampling, determination of impurities and chlorides, and testing for fineness, compressive strength and initial setting
time. A method is also included for the determination of standard consistency.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 10 pages

AS/NZS 2596:2003 Seat belt assemblies for motor vehicles


Specifies requirements for seat belt assemblies for use by adults and larger children intended for after market supply. This Standard
modifies and has been reproduced from UN ECE Regulation 16 with variations for Australian and New Zealand included in a ZZ
Appendix.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 106 pages

AS/NZS 2604:1998 Sunscreen products - Evaluation and classification


Specifies procedures for determining the performance of sunscreen products in terms of their mean protection factors. It gives test
methods for both broad-spectrum and water-resistant sunscreen products, as well as detailed labelling requirements. This edition
specifies changes to category definitions for various tested protection factor ranges, and provides an explanation in the Preface and
Foreword which better explains the meaning of sun protection factors.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 2615:2004 Hydraulic trolley jacks


Specifies minimum safety requirements, technical specifications and test methods for hydraulic trolley jacks. It does not apply to
vehicle jacks, which are specified in AS/NZS 2693.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 18 pages

AS/NZS 2619:1998 Information and documentation - Format for information exchange


Specifies the requirements for a generalized exchange format which will hold records describing all forms of material capable of
bibliographic description as well as other types of records. It is identical with and has been reproduced from ISO 2709:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 2621:1998 Textiles - Guide to the selection of correct care labelling instructions from AS/NZS 1957
Sets out guidelines to assist manufacturers in the selection of appropriate care labelling instructions from AS/NZS 1957 and specifies
basic performance requirements and test methods for colourfastness and dimensional stability which may be used to determine
whether an article complies with those requirements when cleaned in accordance with the instructions on the label.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 2622:1996 Textile products - Fibre content labelling


Specifies methods of labelling textile products with fibre content information. This revision clarifies allowable tolerances as well as
the components included in the fibre content determination of a textile product.
Cited in Consumer Information Standards (Fibre Content Labelling) Regulations 2000
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

BS 2627:1970 (Withdrawn)

NZS/ISO 2631:- (Withdrawn)

AS/NZS 2632:- Codes for the representation of names of countries and their subdivisions

AS/NZS 2632.1:2008 Country codes


Provides basic guidelines for the implementation and maintenance of current country names in coded form. Identical with and
reproduced from ISO 3166-1:2006 including Corrigendum 1:2007.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 73 pages

AS/NZS 2632.2:1999 Country subdivision code


Provides the structure for a code for the representation of names of principal administrative divisions, or similar areas, of countries
etc. included in ISO 3166-1 (AS 2632.1). This Standard is identical with and reproduced from ISO 3166-2:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 105 pages

AS/NZS 2632.3:1999 Codes for formerly used names of countries


Provides the principles and maintenance arrangements of a code for the representation of country names removed from editions 1 to
4 of ISO 3166 (AS 2632) and the consecutive edition of ISO 3166-1 (AS 2632.1). This Standard is identical with and reproduced
from ISO 3166-3:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

AS/NZS 2633:1996 Guide to the specification of colours


Provides information on factors which should be taken into account when specifying colours. Describes various methods that may be
used to specify colours, giving guidance in the selection of the appropriate method.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 32 pages

NZS/BS 2634: (Withdrawn)

AS/NZS 2635:2008 Solaria for cosmetic purposes


Sets out requirements for installing, maintaining and operating solaria for cosmetic purposes. It provides a basis for setting up and
operating artificial tanning equipment, particularly in commercial establishments with solarium facilities. Product requirements for
artificial tanning equipment are not included in this Standard, and are specified in the AS/NZS 3350 series and IEC 61228. Electrical
safety requirements for artificial tanning equipment are specified in AS/NZS 3350.2.27. Unsupervised self-service solariums should
not be available, and therefore are not covered within the scope of this Standard.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
NZS/AS 2638:- Gate valves for waterworks purposes

2638.2:2003 Resilient-seated
Specifies requirements for Class 16 metal-bodied resilient-seated gate valves for waterworks purposes.
Adopted Standard
$74.95+GST (Members), $93.69+GST (Retail), 41 pages

AS/NZS 2640:1994 Portable ramps for vehicles


Specifies safety and performance requirements for portable ramps used in the maintenance and display of motor vehicles. Design
requirements and testing methods are included covering strength, structural integrity, roll-off ease of mounting (drive on test).
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

AS/NZS 2642:- Polybutylene pipe systems

2642.1:2007 Polybutylene (PB) pipe extrusion compounds


Specifies requirements for polybutylene extrusion compounds suitable for making polybutylene pipe for hot and cold water
applications.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 20 pages

2642.2:2008 Polybutylene (PB) pipe for hot and cold water applications
Specifies materials, dimensions and performance requirements for polybutylene pipe for hot and cold water plumbing applications,
including domestic, industrial and agricultural purposes.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 20 pages

2642.3:2008 Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water
applications
Provides manufacturers and purchasers with a standard specification for mechanical jointing fittings suitable for use as fixed joints
with polybutylene plumbing pipes manufactured in accordance with AS/NZS 2642.2.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 28 pages

AS/NZS 2647:2000 Biological safety cabinets - Installation and use


Provides requirements and recommended practices for the installation, operation, decontamination, maintenance and inspection of
Classes I and II biological safety cabinets.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 2648:- Underground marking tape

2648.1:1995 Non-detectable tape


Specifies requirements for printed underground marking tape suitable for use in conjunction with underground public utility services
as a means of indicating the proximity of a service. It applies to tape which is not detectable by metal detectors.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 2650:2000 (Withdrawn)

NZS/BS 2654:1989 (Withdrawn)

AS/NZS 2693:2007 Vehicle jacks


Specifies requirements for the design, construction, performance and labelling of jacks designed to raise vehicles. This edition
revises the warning notices.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS 2696:1996 Medical devices - Polymer urethral catheters for general medical use
Specifies requirements for polymer urethral catheters, manufactured sterile and non-sterile, and intended to be introduced through
the urethra into the urinary bladder. Appendices include methods for determining catheter balloon performance, flow rate, in-use
compatibility and cytoxicity.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 2697-1990 (Withdrawn)

AS/NZS 2699:- Built-in components for masonry construction

2699.1:2000 Wall ties


Specifies requirements for wall ties for masonry and masonry-veneer walls of Type A and Type B, including cavity, veneer and
remedial.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

2699.2:2000 Connectors and accessories


Specifies performance requirements covering corrosion resistance and tests for structural serviceability, for connectors and
accessories built into masonry.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages

2699.3:2002 Lintels and shelf angles (durability requirements)


Sets out the requirements for methods of testing the durability performance of steel lintel and shelf angles that are built into masonry.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
Provides designers, manufacturers, installers and interested parties with performance-based design and construction requirements
for solar and heat pump hot water supply systems.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 64 pages

AS/NZS 2717:- Welding - Electrodes - Gas metal arc

2717.1:1996 Ferritic steel electrodes


Specifies requirements for carbon steel electrodes and low or intermediate alloy ferritic steel electrodes for gas metal arc welding. It
defines a classification and designation system for the electrodes, and includes a method for the easy selection of the weld metal
based on its mechanical properties.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

AS/NZS 2721:1996 Wool - Subsampling staples from grab samples


Sets out a method of subsampling of staples from a grab sample or sample of greasy wool drawn in accordance with AS/NZS
1363.1. The method is applicable to the selection of staples suitable for staple measurements of greasy wool which is suitable for
combining. Identical with and reproduced from IWTO-7-92.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications -
Performance requirements
Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated
on one or both sides with an organic film, and that are intended for fabrication into products for use in the construction or finishing of
buildings.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 52 pages

AS/NZS 2739:2009 Natural gas (NG) fuel systems for vehicle engines
Specifies requirements for natural gas (NG) fuel systems for engines mounted on motor vehicles, either for the propulsion of the
vehicles or for driving some auxiliary function, e.g. a mixer or a pump. It provides requirements for the design and construction of
component parts, and for their installation in vehicles, and for tests, commissioning, and periodic inspection. It applies to all vehicle
types, e.g. rigid chassis, articulated chassis and semitrailers.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 68 pages

AS/NZS 2751:1993 (Withdrawn)

AS/NZS 2754 Adhesives for timber and timber products

AS/NZS 2754.1(Int):2008 Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
Provides the specifications for adhesives suitable for use in the plywood and laminated veneer lumber (LVL) manufacturing industry.
This draft is prepared as an Interim Standard awaiting the outcome of a major research project on new generation adhesives
durability currently in progress.
Interim Standard - Expires on 31 December 2010
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 28 pages

NZS 2772:- Radiofrequency fields

2772.1:1999 Maximum exposure levels - 3 kHz to 300 GHz


Specifies limits of exposure of the human body to radiofrequency radiation intended to avoid biological effects hazardous to the body
in the frequency range 3 kHz to 300 GHz. The Standard applies to the occupational exposure of radiation workers and the incidental
exposure of the general public. It does not apply to the irradiation of patients for medical diagnosis or treatment nor does it establish
requirements for induced charges on steel structures or the ignition of explosives or flammable gases.
Reprinted to append Amendment 1:1999
$94.95+GST (Members), $118.69+GST (Retail), 36 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2772.1(Int):1998 (Superseded by NZS 2772.1:1999)

AS/NZS 2777:- Information processing systems - Open Systems Interconnection - Basic reference model

2777.1:1998 The basic model


Specifies a common basis for the coordination of standards development for the purpose of systems interconnection, while allowing
existing standards to be placed in perspective within the overall Reference Model. This Standard is identical with and has been
reproduced from ISO/IEC 7498-1:1994.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages

NZS/BS 2779:1986 (Withdrawn)

AS/NZS 2785:2000 Suspended ceilings - Design and installation


Sets out minimum requirements for the design, construction, installation, maintenance and testing of internal and external non-
trafficable suspended ceiling systems of dry construction with suspension systems attached to a supporting structure, for use in
commercial, industrial and residential applications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 43 pages
AS/NZS 2794:1994 Information technology - Telecommunications and information exchange between systems
- 34-pole DTE/DCE interface connector mateability dimensions and contact number
assignments
Specifies the 34-pole connector, including assignments, to be used between data terminal equipment and data control equipment
where V.35 or X.21bis is applicable. Identical with and reproduced from ISO/IEC 2593:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

NZS/ISO 2795:1991 (Withdrawn)

AS/NZS ISO 2801:2008 Clothing for protection against heat and flame - General recommendations for selection,
care and use of protective clothing
Provides guidelines for users of occupational clothing where protection is needed against heat and flame. Adopted from and identical
to ISO/TR 2801:2007.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 32 pages

AS/NZS 2802:2000 Electric cables - Reeling and trailing for mining and general use (other than underground
coal mining)
Specifies the requirements for two classes of multicore elastomer insulated and sheathed flexible reeling and trailing cables for
surface mining, underground mining (other than coal mining) and general use, where movable plant requires electricity supply at
system voltages from 1.1/1.1 kV up to and including 33/33 kV.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 54 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 2803:1980 (Withdrawn)

AS/NZS 2803:- (Withdrawn)

AS/NZS 2804:- (Withdrawn)

AS/NZS 2807:2000 Reporting outstanding orders (in the book trade)


Proposes a code of practice for use by book publishers when reporting the reasons why orders for books have not been filled. An
abbreviated report code and the valid status codes are given for each category of outstanding orders report as well as additional
information which needs to be supplied for particular reports.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 2810:1997 Wool - Determination of staple length and staple strength


Specifies a method for the measurement of mean staple, mean staple strength, and the position of break in greasy wool suitable for
worsted processing. Identical with and reproduced from IWTO-30-93.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS/AS 2812:1985 (Withdrawn)

AS/NZS 2817:1997 Implants for surgery - Care and handling of orthopaedic implants
Sets out procedures for handling orthopaedic implants from receipt at the health care facility until they are implanted or discarded.
Technically equivalent to and reproduced from ISO 8828:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
AS/NZS 2832.1:1998 (Withdrawn)

AS/NZS 2843:- Timber preservation plants

2843.1:2006 Timber preservation plant site design


Specifies requirements for the siting, design and layout of timber preservation plant sites. Deals in general terms with these aspects
in a manner intended to prevent and mitigate the health risk of plant personnel and minimize environmental contamination from
timber preservation plant sites. Applicable to all approved preservatives and, where necessary, specific requirements for some
preservative are given.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

2843.2:2006 Treatment area operation


Specifies requirements for the operation of timber preservation equipment used in the treatment area. Deals in general terms with
these aspects in a manner intended to prevent and mitigate the health risk to treatment area personnel and minimize environmental
contamination from timber preservation plant sites.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS 2845:- Water supply - Backflow prevention devices

2845.1:1998 Materials, design and performance requirements


Specifies requirements for the materials, design and performance testing of backflow devices used to prevent contamination of
potable water supplies.
Cited in BIA Approved Document G12/AS1
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 107 pages

AS/NZS 2857:1996 Timber drums for insulated electric cables and bare conductors
Specifies requirements for timber drums up to 5 t capacity for the transport and storage of insulated electric cable, bare conductor
and other products for which the drums are suitable. The Standard includes nomenclature and dimensions of a preferred range of
drums, together with details of materials, construction and marking and special requirements for the protection of cables.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

AS/NZS 2865:2001 Safe working in a confined space


Provides requirements and guidance in eliminating or minimizing the need to enter confined spaces and in avoiding hazards which
may be encountered where entry to a confined space is unavoidable. Contains Sections dealing with risk identification and
assessment, monitoring prior to entry, education and training as well as emergency response. Appendices provide additional
guidance for cleaning and the precautions needed when undertaking hot work. A sample risk assessment form and written authority
to enter are provided, as is a typical check list.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 45 pages

AS/NZS 2869:1998 Tampons - Menstrual


Specifies requirements for menstrual tampons including length, pull strength and water repellency of the withdrawal cord, materials,
absorptive capacity, microbial content, marking and packaging. Includes a classification system based on tampon absorbency with
descriptive terms to be used in labelling tampons according to their absorbency range. Information to be given in an accompanying
leaflet is described.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2878:2000 Timber - Classification into strength groups


Specifies a procedure for the classification of timber species into positive or provisional strength groups based on testing of small,
clear specimens or on the species mean dry density. When used in conjunction with visual grading rules the strength groups provide
a means of determining a stress grade for graded timber. A list of species and their strength groups is given.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

NZS/AS 2885:- Pipelines - Gas and liquid petroleum

2885.1-1997 Design and construction


Specifies requirements for the design and construction of steel pipelines and associated piping components that are used to transmit
single phase and multiphase hydrocarbon fluids. Applies where the temperature of a fluid is within the range of -30 degrees Celsius
to 200 degrees Celsius, and either the maximum allowable operating pressure is more than 1050 kPa or the hoop stress exceeds 20
percent of the specified minimum yield.
Reprinted to incorporate Amendment 1 and append Amendment A
Cited in Health and Safety in Employment (Pipelines) Regulations 1999
Adopted Standard
$196.59+GST (Members), $245.74+GST (Retail), 100 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment A, 1999 $49.95+GST (Members), $62.44+GST (Retail)

2885.2-1995 Welding
Specifies materials, welding consumables, welding processes, weld preparations, qualifications of welding procedures and
personnel, and fabrication and inspection requirements for the welding of pipelines in construction and maintenance operations. It
applies specifically to the welding of pipelines complying with AS 2885.
Cited in Health and Safety in Employment (Pipelines) Regulations 1999
Adopted Standard
$172.73+GST (Members), $215.91+GST (Retail), 68 pages

2885.5:2002 Field pressure testing


Specifies methods for the pressure testing of petroleum pipelines in accordance with AS 2885.1 and AS 2885.3. It may also be used
for testing other pipelines including those designed to AS 1697.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 79 pages

AS/NZS 2890:- Parking facilities

2890.1:2004 Off-street car parking


Sets out minimum requirements for the design and layout of off-street parking facilities, including multi-storey car parks for motor
cars, light vans and motorcycles. It includes access and egress requirements for both public and private car parks, and car parking
on domestic properties.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 67 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2891:- Methods of sampling and testing asphalt

2891.3:- Bitumen content and aggregate grading

2891.3.1:1997 Reflux method


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

2891.3.2:1997 Centrifugal extraction method


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

2891.3.3:1997 Pressure filter method


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

2891.14:- Field density tests

2891.14.1:- Determination of field density of compacted asphalt using a nuclear surface moisture-
density gauge

2891.14.1.1:1996 Direct transmission mode


Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - direct transmission mode.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

2891.14.1.2:1999 Backscatter mode


Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

2891.14.2:1999 Determination of field density of compacted asphalt using a nuclear thin-layer density
gauge
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

2891.14.3:1999 Calibration of nuclear thin-layer density gauge using standard blocks


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

2891.14.4:1999 Calibration of nuclear surface moisture-density gauge - Backscatter mode


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

2891.14.5:1999 Density ratio of compacted asphalt


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 2893:2002 Electric cables - Lead and lead alloy sheaths - Composition
Specifies the chemical composition of metallic sheathing for electric and telecommunication cables. An appendix provides guidance
on the types of cables and service conditions for which the different compositions are primarily intended.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 4 pages

AS/NZS 2895:- Performance of household electrical appliances - Microwave ovens

2895.1:2007 Methods for measuring the performance of microwave ovens for household and similar
purposes
Specifies the reproducible performance measurements of household microwave ovens and combination microwave ovens from IEC
60705, Ed. 3.2(2006). In particular the principal performance characteristics and procedures for determining external dimensions,
useable cavity volume, useable cavity dimensions, microwave power output, efficiency, uniformity of heating and heating of
beverages. It does not include the subjective cooking tests of IEC 60705, Ed. 3.2(2006) (these are contained in AS/NZS
2895.3.:2007). Based on IEC 60705, Ed. 3.2 (2006) with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

2895.3:2007 Construction, quality and cooking tests


Specifies requirements for the design and construction, marking and accompanying information, and performance of microwave
ovens intended for domestic use. Also describes subjective test for gauging the cooking and defrosting performance. The cooking
and defrosting tests are identical to those of IEC 60705 Ed. 3.2:2006.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS/BS 2903:1980 (Withdrawn)


AS/NZS 2904:1995 Damp-proof courses and flashings
Specifies the requirements for damp-proof course and flashing materials of the sheet membrane, strip and collar type for use in
building construction. It does not cover vapour barriers; or mortar-type damp-proof courses.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2906:2001 Fuel containers - Portable - Plastics and metal


Specifies material, design, properties (including test methods) and marking requirements for refillable portable petroleum-product
fuel containers made of metal or plastics, and of capacity up to and including 25 L. It applies to containers for the storage and
transport of fuel, and fuel tanks for boats. The containers are suitable for use with unleaded, leaded and super grades of petrol, two-
stroke engine fuel and kerosene, but are excluded from use with racing fuels unless specifically approved by the manufacturer.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 42 pages

AS/NZS 2908:- Cellulose-cement products

2908.1:2000 Corrugated sheets


Sets out requirements for corrugated cellulose-cement sheets for use primarily as roofing and wall cladding. It applies to auto-claved
sheets in which the cement is partially replaced by ground silica. Appendices provide means for demonstrating compliance with this
Standard and methods of test for determination of strength, water-tightness, and resistance to hot water soaking of corrugated
cellulose-cement sheets.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

2908.2:2000 Flat sheets


Specifies the characteristics, methods of control and test, and acceptance for fibre-cement flat sheets. It covers sheets intended for
external applications such as cladding facades, curtain walls, soffits, lost casing, and the like, and sheets intended for internal use
such as partitions, floors and ceilings, with a wide range of properties appropriate to the type of application. This Standard is identical
with ISO 8336:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 2912:1993 (Withdrawn)

AS/NZS 2914:2007 Textile floor coverings - Informative labelling


Sets out the requirements for labelling textile floor coverings, including information to be provided by the supplier, and the method of
providing it at the point of sale.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 8 pages

NZS/BS 2915:1990 (Withdrawn)

AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation


Specifies requirements for appliance and flue installation for solid fuel burning appliances in dwellings. Sets out alternative means of
compliance via performance testing of a prototype installation or the use of prescriptive criteria (dimension, materials, etc) based on
a worst case situation.
Cited in BIA Approved Document C/AS1
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 72 pages

AS/NZS 2924:- High pressure decorative laminates - Sheets made from thermosetting resins

2924.1:1998 Classification and specifications


Establishes a classification system for high pressure decorative laminated sheets according to their performance and main
recommended fields of application, including materials with special characteristics, for example postformability or defined reaction to
fire. Also specifies requirements on the properties of the various types of laminate covered by this classification. For several of the
properties, more than one test method for checking the requirements is given. This Standard is identical with and has been
reproduced from ISO 4586-1:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

2924.2:1998 Determination of properties


Specifies the methods of test for determination of the properties of high pressure decorative laminated sheets. These methods are
primarily intended for testing the sheets specified in AS/NZS 2924.1:1998. This Standard is identical with and has been reproduced
from ISO 4586-2:1997.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas


Provides requirements and recommendations for the safe storage and handling of liquefied chlorine gas, in cylinders, drums and
bulk, as well as requirements for ancillary equipment.
Reprinted to append Amendment 1:2001
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 65 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 2947:- (Withdrawn)

NZS/AS 2958.1-1995 (Withdrawn)

NZS/BS 2971:1991 (Withdrawn)

AS/NZS 2978:1995 Insulating mats for electrical purposes


Specifies constructional and test requirements for two classes of insulating mats. The covers may be for general purpose use or
restricted to use indoors and are intended to protect personnel where there is the possibility of contact with the conductors of
electrical equipment.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 2980:2007 Qualification of welders for fusion welding of steels


Defines the qualification test of welders for the welding of steels to the requirements of a welding procedure specification. It provides
a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted
independently of the type of product, location and examiner/examining body.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 60 pages

AS/NZS 2982:- Laboratory design and construction

2982.1:1997 General requirements


Sets out requirements relating to the design and construction of buildings which have laboratories. It applies both to new laboratories
and to where existing buildings are converted to laboratory use. Special sections are included for hazardous substances, biological
laboratories, radiological, secondary school and tertiary laboratories.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

AS/NZS 2994:2000 Information technology - Open Systems Interconnection - Network service definition
Specifies the network service definition as used by OSI systems. This Standard is identical with and has been reproduced from
ISO/IEC 8348:1996 and ISO/IEC 8348:1996/Amd 1:1998.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 61 pages
NZS 3000:1997 (Superseded by AS/NZS 3000:2000)

AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
Provides requirements for the selection and installation of electrical equipment, and design and testing of electrical installations,
especially with regard to the essential requirements for safety of persons and livestock from physical injury, fire or electric shock. The
presentation of this edition differs from previous editions of AS/NZS 3000 in that the Standard comprises two parts but with both
parts bound as one document. Part 1 provides uniform essential elements that constitute the minimum regulatory requirements for a
safe electrical installation. Part 2 provides installation practices that achieve certainty of compliance with the essential safety
requirements of Part 1.
This 2007 Standard recently approved by the Associate Minister of Energy and published as a key document in the revision of the
AS/NZS 3000 Standards series. Certain sections of the previous (2000) edition of this Standard are mandatory and must be
complied with until current Regulations are amended. Tables are included in the 2007 edition that relate to the mandatory clauses
and the means of compliance clauses in the 2000 edition.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 448 pages

AS/NZS 3001:2008 Electrical Installations - Transportable structures and vehicles including their site supplies
Sets out the requirements for electrical installations associated with transportable structures and vehicles that are intended for
connection to low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.). For the purposes of this
Standard the term ‘transportable structure’ includes both vehicles and structures with or without wheels that can readily be moved
from one site to another either under their own motive power or by some other means.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 52 pages

AS/NZS 3002:2008 Electrical installations - Shows and carnivals


Sets out requirements for the supply of electricity at low-voltage by wiring systems to power consuming devices used for
accommodation, entertainment or display purposes within - (a) concessions; (b) tents; (c) living quarters; and (d) other structures
associated with events with a maximum duration of four weeks. For the purposes of this Standard, events include exhibitions, shows,
carnivals, scouting jamborees, army camps and the like.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 32 pages

NZS 3003:- Electrical installations

3003.1:2003 Patient areas of hospitals and medical and dental practices - Testing requirements
This NZ Standard provides guidance for the inspection, checking and testing of electrical installations in patient areas of hospitals
and medical and dental practices.
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

AS/NZS 3003:2003 Electrical installations - Patient areas of hospitals, medical and dental practices and
dialyzing locations
Specifies requirements in addition to those in the SAA Wiring Rules (AS 3000) for electrical installations in hospitals and medical and
dental practices where electromedical procedures are performed on a regular basis. In addition, specifies requirements for cardiac-
protected and body-protected electrical areas. Included in the appendices are typical forms for commissioning tests for patient
treatment areas, methods of measuring magnetic fields and resistance calculations in equipotential areas.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 57 pages

AS/NZS 3004 Electrical installations - Marinas and recreational boats

AS/NZS 3004.1:2008 Marinas


Specifies requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding
50 V a.c. but not exceeding 1 000 V a.c.).
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 28 pages

AS/NZS 3004.2:2008 Recreational boats installations


Specifies requirements for electrical installations on boats with a maximum length of 50 m.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 72 pages

AS/NZS 3008:- Electrical installations - Selection of cables

3008.1:- Cables for alternating voltages up to and including 0.6/1 kV

3008.1.1:1998 Typical Australian installation conditions


Sets out the procedures to be followed for the selection of cables to satisfy typical Australian installation conditions where the
ambient air temperature is 40 degrees C and ambient soil temperature is 25 degrees C. Criteria given are current-carrying capacity,
voltage drop and short-circuit temperature rise.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 95 pages

3008.1.2:1998 Typical New Zealand installation conditions


Sets out the procedures to be followed for the selection of cables to satisfy typical New Zealand installation conditions where the
ambient air temperature is 30 degrees C and ambient soil temperature is 15 degrees C. Criteria given are current-carrying capacity,
voltage drop and short-circuit temperature rise.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 92 pages

AS/NZS 3009:1998 Electric installations - Emergency power supplies in hospitals


Specifies requirements for the design, installation and operation of emergency electrical supplies for standby power and lighting in
hospitals, identifies areas and functions for which emergency supplies are essential and lists the maximum delays that can be
tolerated in the restoration of supplies. Appendices include examples of emergency power supply systems and associated
maintenance programs. This Standard does not specify the size or type of hospitals that require emergency supplies.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

AS/NZS 3010:2005 Electrical installations - Generating sets


Specifies the minimum safety requirements related to the use of generating sets for the supply of electricity at voltages normally
exceeding 50 V a.c. or 120 V d.c. Applies to electricity generating sets, that are driven by internal combustion engines, and which
are used for the supply of electrical installations in buildings or items of equipment.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

AS/NZS 3012:2003 Electrical installations - Construction and demolition sites


Sets out requirements for electrical installations which supply electricity to equipment on construction and demolition sites. Includes
requirements for the inspection and testing of electrical equipment used on building construction sites.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 31 pages

AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring
system elements
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage. Type
tests to verify the level of protection provided by a wiring system are given. Intended for reference in other Standards which specify
wiring systems with a degree of resistance to damage from fire or mechanical impact.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

AS/NZS 3014:2003 Electrical installations - Electric fences


This standard sets out the requirements for the installation and operation of electric fences and their associated equipment, both
outdoors and indoors. It covers electric fences powered by energizers supplied from all types of electric power sources.
Incorporates Appendix A and Appendix B; Reprinted to incorporate Amendment 1
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 31 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3015:2004 Electrical installations - Extra-low voltage d.c. power supplies and service earthing within
public telecommunications networks
Provides requirements for telecommunications extra low voltage d.c. power supplies in restricted access locations of premises that
are used by licensed public telecommunications carriers in the provision of public telecommunications networks.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 60 pages

AS/NZS 3016:2002 Electrical installations - Electric security fences


This Standard sets out safety requirements for the installation and operation of electric security fences and their associated
equipment. It covers electric security fences powered by electric fence energizers supplied from all types of electric power sources.
Reprinted to incorporate Amendment 1:2006
Cited in Electricity Regulations 1997; Electricity Amendment Regulations 2003
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3017:2007 Electrical installations - Verification guidelines


Provides verification (inspection and testing) guidelines to ensure that electrical installations comply with the requirements of AS/NZS
3000 with regard to the prevention of people or livestock from sustaining an electric shock or injury from fire. Includes tests for earth
continuity and resistance, insulation resistance, polarity, correct circuit connections, phase sequence, earth fault-loop impedance,
operation of residual current devices (RCDs), measurement of the resistance of the earth electrode, measurement of touch voltage
and continuity, and resistance of the incoming neutral.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages

AS/NZS 3018:2001 Electrical installations - Domestic installations


Specifies requirements and suitable methods for installing electrical installations in domestic premises including alterations, additions
and repairs. Sufficient information has been included to allow the completion of an electrical installation without reference to AS/NZS
3000.
Reprinted to incorporate Amendment 1:2003.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 125 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3019:2004 Electrical installations - In-service testing


Sets requirements for the inspection and testing of low voltage electrical installations that are in service or have been serviced. It
also includes requirements for rest homes, schools and similar installations and relocatable premises, caravan sites, pleasure craft
and marinas. Additionally it covers the inspection of work involving mains, main switchboards or main earthing systems and the
testing of work undertaken by homeowners involving the installation, extension or alteration of subcircuits.
Superseded by AS/NZS 3019:2007 but remains current until the Electricity Regulations are amended
$64.95+GST (Members), $81.19+GST (Retail), 31 pages

AS/NZS 3019:2007 Electrical installations - Periodic verification


Provides persons who carry out periodic verification, by inspection and/or testing, with the means to determine, as far as reasonably
practicable, whether the installation and all its constituent equipment is in a safe condition for continued use, and that the electrical
installation complies with the safety requirements for the prevention of fire or a person or livestock from sustaining an electric shock.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

NZS/ISO 3046.3-1989 (Withdrawn)


NZS/BS 3062:1985 Specification for ophthalmic lens materials
`White` and tinted materials for ophthalmic lenses. `White` ophthalmic crown glass (normal, close tolerance); flint glass (dense flint,
two types of extra dense flint); barium glass (barium flint, two types of dense barium flint); plastics. Materials for contact lenses not
included.
Adopted Standard
$121.21+GST (Members), $151.51+GST (Retail), 12 pages
Amendment 1, 1986 $29.95+GST (Members), $37.44+GST (Retail)

NZS/ISO 3075:1980 (Withdrawn)

NZS/ISO 3076:1984 (Withdrawn)

NZS/ISO 3077:1984 (Withdrawn)

AS/NZS 3080:2003 Telecommunications installations - Generic cabling for commercial premises


Provides building owners, managers, architects, designers, manufacturers, installers, maintainers and users with requirements to
ensure compatibility with equipment and services and to ensure performance of infrastructure to meet present and foreseeable future
requirements. This Standard is based on and has been reproduced from ISO/IEC 11801:2002.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 132 pages
Amendment 1, 2009 $34.95+GST (Members), $43.69+GST (Retail)

AS/NZS 3084:2003 Telecommunications installations - Telecommunications pathways and spaces for


commercial buildings
Specifies practices to assist architects, planners, designers, engineers, builders, installers, maintenance personnel, building owners,
managers and users in the planning of physical pathways and spaces in and between buildings to accommodate the equipment and
cabling infrastructure necessary for communications.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 77 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3085:- Telecommunications installations

3085.1:2004 Basic requirements


Provides building owners and managers, and those who are required to meet cabling requirements (e.g. installers), with a set of
basic specifications for identification and recording of components at the time of installation to aid in administration of application,
maintenance and reconfiguration (if necessary) of telecommunications cabling infrastructure.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 38 pages

AS/NZS 3086:1996 (Superseded by AS/NZS ISO/IEC 15018:2005)

AS/NZS 3087.1:2003 (Superseded by AS/NZS IEC 61935.1:2006)

AS/NZS 3087.2:2003 (Superseded by AS/NZS IEC 61935.2:2006)

AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
Specifies essential safety requirements for approval and test purposes. It is a parent specification for a series of approval and test
specifications.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 106 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZMP 3100:2000 (Withdrawn)

NZS 3101, Parts 1 & 2:2006 Concrete Structures Standard


Part One, The Design of Concrete Structures, specifies minimum requirements for the design of reinforced and prestressed concrete
structures. It is applicable only to structures and parts of structures complying with the materials and workmanship requirements of
NZS 3109: 1987. Part Two, Commentary on The Design of Concrete Structures, explains the provisions of Part One, summarises
technical background and suggests approaches which satisfy the intent of the Standard. This revision of NZS 3101 has been written
with the objective of producing a concrete design standard which is compatible with the loading standards AS/NZS 1170 and NZS
1170.5, and other referenced loading standards. It is organised in component focused sections, for ease of use.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
$309.95+GST (Members), $387.44+GST (Retail), 646 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $95.96+GST (Members), $119.95+GST (Retail)

AS/NZS 3101:1992 (Superseded by AS/NZS 3350.2.9:1996)

NZS 3102:1983 (Superseded by AS/NZS 4455:1997)

AS/NZS 3102:2002 Approval and test specification - Electric duct heaters


Specifies essential safety requirements for approval and test purposes. This Standard is to be read in conjunction with AS/NZS
3100.
Reprinted to incorporate Amendments 1 and 2
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 14 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3103:1991 Specification for sands for mortars and plasters


Specifies essential requirements for naturally occurring, manufactured, and blended sands, other than lightweight sands, suitable for
use in mortars and plasters to meet normal structural and durability requirements.
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 3103:1993 (Superseded by AS/NZS 3350.2.61:1995 and AS/NZS 3350.2.30:1997)

NZS 3104:2003 Specification for Concrete Production


Prescribes minimum requirements for the production of fresh concrete.
Reprinted to incorporate Amendment 1:2007
$84.95+GST (Members), $106.19+GST (Retail), 38 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3105:1986 (Superseded by NZS 3104:2003)

AS/NZS 3105:2007 Approval and test specification - Electrical portable outlet devices
Provides the Australian and New Zealand electrical industry including manufacturers, test laboratories and regulators with
requirements and test methods for electrical portable outlet devices. To be read in conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 3106:1986 Code of practice for concrete structures for the storage of liquids
Sets out requirements for design, materials and construction of concrete structures for the storage of liquids. Covers construction in
reinforced and prestressed concrete and in cement mortar.
Reprinted to append Amendments 1 & 2 and Erratum 1
Cited in BIA Approved Documents B1/VM1 and G14/VM1
$84.95+GST (Members), $106.19+GST (Retail), 77 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1992 $29.95+GST (Members), $37.44+GST (Retail)
Erratum: 1 1987

NZS 3107:1978 (Superseded by AS/NZS 4058:2007)

NZS 3108:1983 (Superseded by NZS 3104:2003)

AS/NZS 3108:1994 (Superseded by AS/NZS 61558.1:2000, AS/NZS 61558.2.4:2001, AS/NZS 61558.2.5:2003,


AS/NZS 61558.2.6:2001, AS/NZS 61558.2.7:2001, AS/NZS 61558.2.8:2001 and AS/NZS
61558.2.9:2003)

NZS 3109:1997 Concrete construction


Provides minimum requirements for the construction of reinforced concrete, unreinforced concrete, prestressed concrete or a
combination, in elements of any building or civil engineering structure.
Reprinted to append Amendments 1 & 2
Cited in BIA Approved Document B1/AS3
$64.95+GST (Members), $81.19+GST (Retail), 67 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3109.1:1996 (Superseded by AS/NZS 60320.1:2004)

NZS 3111:1986 Methods of test for water and aggregate for concrete
Establishes requirements for methods of sampling and testing of water and aggregate for concrete.
Reprinted to append Amendment 1:1988
$84.95+GST (Members), $106.19+GST (Retail), 50 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3111:2009 Approval and test specification - Miniature overcurrent circuit-breakers


Specifies essential safety requirements for approval and test purposes for miniature overcurrent circuit-breakers. It is intended to be
read in conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 3112:- Methods of test for concrete

Part 1:1986 Tests relating to fresh concrete


Sets out methods of sampling fresh concrete and methods of test for unit mass, workability, consistency, bleeding, air content and
setting time of fresh concrete.
Reprinted incorporating Amendment 1 and appending Amendment 2
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1,
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

Part 2:1986 Tests relating to the determination of strength of concrete


Sets out methods of moulding, curing and testing concrete specimens for compressive, flexural and splitting tensile strength, testing
of drilled concrete cores and the statistical analysis of strength results.
Reprinted to append Amendment 1:1988 and Amendment 2:2000
Cited in BIA Approved Document B1/AS3
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2000 $29.95+GST (Members), $37.44+GST (Retail)
Part 3:1986 Tests on hardened concrete other than for strength
Sets out methods of test for shrinkage and expansion, coefficient of linear thermal expansion and density of concrete.
Reprinted incorporating Amendment 1
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
Amendment 1,

Part 4:1986 Tests relating to grout


Sets out methods of test for flow time, volume change and bleeding and moulding, curing and compressive testing of grout
consisting of water and cement only.
Reprinted to incorporate Amendment 1:1986
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1986

AS/NZS 3112:2004 Approval and test specification - Plugs and socket-outlets


Provides the Australian and New Zealand electrical industry, including manufacturers, test laboratories and regulators with
requirements and test methods for plugs and socket-outlets. To be read in conjunction with AS/NZS 3100.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3113:1979 (Withdrawn)

AS/NZS 3113:2005 Approval and test specification - Ceiling roses


Specifies essential safety requirements for ceiling roses rated up to, and including, 16A for use at low voltage. To be read in
conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

NZS 3114:1987 Specification for concrete surface finishes


Categorizes by means of description and illustration various classes of surface finish of concrete obtained off-the-form, by exposed
aggregate and on floors, exterior pavements and inverts.
Reprinted incorporating Amendment 1
Cited in BIA Approved Documents D1/AS1 and G15/AS1
$64.95+GST (Members), $81.19+GST (Retail), 44 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3114:1993 (Superseded by AS/NZS 3350.2.45:1997)

NZS 3115:1980 (Superseded by AS/NZS 4065:2000)

AS/NZS 3115:1996 (Superseded by AS/NZS 3350.1:2002)

NZS 3116:2002 Concrete segmental and flagstone paving


Sets out provisions for the non-specific engineering design and construction of pavements using segmental and flagstone pavers. It
also provides New Zealand variations to paver manufacture and tests in relation to AS/NZS 4455 and AS/NZS 4456.
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 2009 $34.95+GST (Members), $43.69+GST (Retail)

AS/NZS 3116:1996 (Superseded by AS/NZS 5000.1:1999)

NZS 3117:1980 (Withdrawn)

AS/NZS 3117:2007 Approval and test specification - Bayonet lampholders


Provides approval and test specifications for bayonet lamp holders for the purposes of safety and approval for sale in Australia and
New Zealand. Satisfies the requirements covered in AS/NZS 3820, Essential safety requirements for low voltage equipment.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS 3118:1993 (Superseded by AS/NZS 60598.2.8:1998)

AS/NZS 3120:1999 Approval and test specification - Cord extension sockets


Specifies essential safety requirements for cord extension sockets intended to be used at extra-low and low voltages. This Standard
is to be read in conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

NZS 3121:1986 Specification for water and aggregate for concrete


Gives essential requirements for water and aggregates, other than lightweight aggregates, suitable for use as materials for making
concrete to meet normal structural and durability requirements.
Reprinted incorporating Amendment 1
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1,

AS/NZS 3121:2002 Approval and test specification - Insulating mouldings


Specifies essential safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 3122:1995 Specification for Portland and blended cements (General and special purpose)
Specifies the requirements and methods of test for the composition, sampling and testing of portland cement. Types of cement
covered are general purpose, general purpose blended, high early strength, low heat, sulphate resisting and shrinkage limited. The
1995 revision substantially adopts AS 3972-1991 with New Zealand specific variations.
Reprinted to incorporate Corrigendum 1
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Corrigendum: 1 1996

AS/NZS 3122:2005 Approval and test specification - Socket-outlet adaptors


Specifies essential safety requirements for socket-outlet adaptors for approval and test purposes. It is intended to be read in
conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

NZS 3123:1974 Specification for Portland pozzolan cement (type PP cement)


Specifies the requirements for a blended hydraulic cement comprising a Portland cement conforming to NZS 3122, and a pozzolan
of appropriate type and quantity for the purpose in view. The blending may be either by intergrinding or by mixing of a separately
processed pozzolan and a finished cement.
Reprinted to append Amendment 1:1995
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3123:2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial
application
Specifies essential safety requirements for plugs, socket-outlets, cable couplers and appliance couplers for operation at 50 Hz, with
a rated voltage not exceeding 660 V and a rated current not exceeding 315 A intended for general industrial use. It is intended to be
read in conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 72 pages

NZS 3124:1987 Specification for concrete construction for minor works


Provides minimum requirements for the construction of reinforced and unreinforced concrete in minor works including buildings of
light timber frame construction within the scope of NZS 3604 and concrete masonry construction within the scope of NZS 4229.
Does not provide specific requirements for concrete construction that will be subjected to aggressive environments.
Cited in BIA Approved Documents E1/AS1
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

NZS/AS 3124-1982 (Withdrawn)

NZS 3125:1991 Specification for portland-limestone filler cement


Specifies the requirements and methods of test for the composition, manufacturing, sampling and testing of portland-limestone filler
cement suitable for general use in concrete construction.
Reprinted to append Amendment 1:1996
$59.95+GST (Members), $74.94+GST (Retail), 21 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 3125:1990 (Superseded by AS/NZS 3350.2.8:1995)

AS/NZS 3127:2005 Approval and test specification - Cord-line switches


Specifies essential electrical safety requirements for cord-line switches for approval and test purposes. It is intended to be read in
conjunction with AS/NZS 3100.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 3128:1998 (Superseded by AS/NZS 60598.2.4:2005)

AS/NZS 3129:- (Superseded by AS/NZS 3350.2.76:1998)

AS/NZS 3130:1995 Approval and test specification - Beauty therapy equipment


Prescribes the safety requirements for certain types of beauty therapy equipment powered by mains supply or batteries.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 3131:2001 Approval and test specification - Plugs and socket-outlets for stationary appliances
Specifies requirements for plugs and socket-outlets intended for the connection/disconnection of stationary appliances (such as
cooking ranges, hobs and ovens) having a voltage not exceeding 500 V a.c. and a maximum current of 32 A. Supersedes AS/NZS
3131:1995 (in part) which will remain Current until 12 October 2006.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 3133:2008 Approval and test specification - Air-break switches


Specifies general and safety requirements for air-break switches with a voltage rating not exceeding 500 V and a current rating not
exceeding 125 A.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 32 pages

NZS/AS 3134-1992 (Superseded by AS/NZS 60928:2000 and AS/NZS 60969:2001)

AS/NZS 3136:2001 Approval and test specification - Electrical equipment for spa and swimming pools
Specifies electrical safety requirements, to be read in conjunction with NZS/AS 3100. Applies to spa-bath, spa pool and swimming
pool pumps, heaters, blowers, chlorinators, chemical injection equipment, and control equipment. Does not apply to luminaires, nor
to equipment for aquariums (see AS/NZS 3192) or fountains. Note: Further regulatory requirements apply; consult NZECP 2, issued
by the Chief Electrical Inspector, Ministry of Commerce.
Superseded in part by AS/NZS 3350.2.60:2000 but is a current standard; Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 3137-1992 (Withdrawn)

AS/NZS 3139.1:1995 (Superseded by AS/NZS 61058.1:2002)

AS/NZS 3140:2007 Approval and test specification - Edison-type screw lampholders


Provides approval and test specifications for Edison-type screw lampholders that must be satisfied to secure approval for sale and
use in Australian and New Zealand for safety-related matters. This Standard satisfies the requirements covered in AS/NZS 3820,
Essential safety requirements for low voltage equipment.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS/AS 3143-1982 (Withdrawn)

NZS/AS 3147-1992 (Superseded by AS/NZS 5000.1:1999)

AS/NZS 3150:1993 (Superseded by AS/NZS 3350.2.59:1999)

NZS 3151:1974 Specification for precast lightweight concrete panels and slabs
Sets out requirements for materials, manufacture, strength, dimensional stability and testing of precast lightweight concrete panels
and slabs.
Reprinted to incorporate Amendment 1:1976 and append Amendment 2:1985
$34.95+GST (Members), $43.69+GST (Retail), 11 pages
Amendment 1, 1976 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1985 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3152:1974 Specification for the manufacture and use of structural and insulating lightweight concrete
Sets out requirements and recommendations for the structural design, manufacture and use of lightweight concrete. Types of
lightweight concrete covered include lightweight aggregate concrete, aerated concrete, no-fines concrete, lightweight concrete
masonry and insulating lightweight concrete.
Reconfirmed in 1980; Reprinted to append Amendment 1:1985
$39.95+GST (Members), $49.94+GST (Retail), 23 pages
Amendment 1, 1985 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3152:1992 (Superseded by AS/NZS 60598.2.20:1998)

NZS 3153:1974 (Withdrawn)

AS/NZS 3155:1995 (Superseded by AS/NZS 4961:2003)

AS/NZS 3156:1995 (Superseded by AS/NZS 60335.2.77:2002)

AS/NZS 3157:1993 (Superseded by AS/NZS 3350.2.10:1996)

NZS/AS 3158:1975 (Withdrawn)

AS/NZS 3160:2001 Approval and test specification - Hand-held portable electric tools
Specifies essential safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3100.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3161:2005 Approval and test specification - Thermostats and energy regulators
To provide the Australian and New Zealand electrical industry including manufacturers, test laboratories and regulators with
requirements and test methods for thermostats and energy regulators.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 3162:1995 (Superseded by AS/NZS 3350.2.14:1995)

AS/NZS 3164:1994 (Superseded by AS/NZS 3350.2.17:2000 and AS/NZS 3350.2.81:1998 (in part))

AS/NZS 3166:1993 Approval and test specification - Cables for high voltage luminous discharge tube
installations
Specifies the construction, dimensions and tests for single-core flexible cables for operation at voltages up to and including 7.5 kV to
earth, used for the wiring of high voltages luminous discharge tube installations.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

NZS/AS 3169-1989 (Superseded by AS/NZS 61210:2002)

AS/NZS 3172:1996 (Superseded in part by AS/NZS 3350-2-6:1998, AS/NZS 3350-2-12:1997 and AS/NZS 3350-2-
13:1997)

AS/NZS 3175.1:1994 (Superseded by AS/NZS 61008.1:2004)

AS/NZS 3175.2.1:1994 (Withdrawn)

AS/NZS 3175.2.2:1994 (Withdrawn)

NZS/AS 3178-1991 Approval and test specification - Electric cables - Silicone rubber insulated - For working
voltages up to and including 0.6/1 kV
Specifies the construction, dimensions and tests for cables insulated with silicone rubber, intended for use in electrical installations at
working voltages up to and including 0.6/1 kV. The Standard does not apply to heavy duty flexible cable applications, which are
included in other cable Standards.
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 30 pages

AS/NZS 3179:1993 (Superseded by AS/NZS 3350.2.40:1997)

AS/NZS 3182:1995 (Superseded by AS/NZS 60335.2.89:2002)

NZS/AS 3184:1990 (Superseded by AS/NZS 3350.2.5:1995)

AS/NZS 3187:1995 (Superseded by AS/NZS 60702.1:2005)

AS/NZS 3188:1995 (Superseded by AS/NZS 60702.2:2005)


AS/NZS 3190:2009 Approval and test specification - Residual current devices (current-operated earth-leakage
devices)
Applies to residual current devices and residual current relays intended to isolate supply or initiate a 'tripping' signal to isolate supply
to protected circuits, socket outlets or equipment in the event of a current flow to earth, which exceeds a predetermined level.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

AS/NZS 3191:2008 Electric flexible cords


Specifies construction, dimensions and tests for flexiblecords insulated with thermoplastic or cross-linked PVC, thermoplastic or
cross-linked elastomers or cross-linked polyolefin which, dependent on cord type, are designed for working voltages up to and
including 250/250 V, 250/440 V or 0.6/1 kV.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 28 pages

AS/NZS 3192:1996 (Superseded by AS/NZS 3350.2.41:1997 and AS/NZS 3350.2.55:1998)

AS/NZS 3194:1993 Approval and test specification - Electric shaver supply units
Specifies electrical safety requirements, to be read in conjunction with NZS/AS 3100. Applies to fixed or portable units in which an
isolating transformer supplies socket-outlets for the connection of electric shaver plugs of various configurations and voltages.
Reprinted to incorporate Amendment 1:1995
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3195:2002 (Withdrawn)

NZS/AS 3196:1986 (Superseded by NZS 6343)

AS/NZS 3197:2005 Approval and test specification - Portable electrical control or conditioning devices
Provides the Australian and New Zealand electrical industry, including manufacturers, test laboratories and regulators with
requirements and test methods for portable electrical or conditioning devices.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3198:1996 (Superseded by AS/NZS 5000.1:1999)

AS/NZS 3199:2007 Approval and test specification - Cord extension sets


Specifies requirements for low voltage cord extension sets consisting of a flexible cord, a three-pin plug and a single cord extension
socket, and intended for detachable connection to fixed wiring.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

AS/NZS 3200:- Approval and test specification - Medical electrical equipment

3200.1:- General requirements for safety

3200.1.0:1998 Parent Standard


Specifies general requirements for safety of electromedical equipment. It is a base specification in the AS/NZS 3200 series; it
becomes a complete specification for an individual item of electromedical equipment when combined with a particular specification in
the AS/NZS 3200 series. It specifies the degrees of isolation of applied parts from both live parts and earth, sufficient to ensure the
safety of the patient from electric shock made under conditions likely to be experienced in services. This revision provides a
consolidated version of AS 3200.1.0-1990 (NZS 6150:1990) incorporating its Amendments 1, 2 and 3. Users of AS 3200.1.0-1990
and its Amendments 1, 2 and 3 are informed that changes in this consolidated edition are limited to the designation, title and
presentation. This Standard is based on and has been reproduced from IEC 60601-1:1998 and its first and second amendments
together with a ZZ appendix added for requirements specific to Australia and New Zealand.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 195 pages

3200.1.1:1995 Collateral Standard - Safety requirements for medical electrical systems


Applies to the safety of medical electrical systems. It describes the safety requirements for these systems necessary to provide
protection to the patient and operator. This standard is identical to and reproduced from IEC 60601-1-1:1992.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

3200.1.2:2005 Collateral Standard: Electromagnetic compatibility - Requirements and tests


Establishes a minimum baseline of performance in the presence of expected levels of electromagnetic disturbance. Recognizes that
there is a shared responsibility between manufacturers, customers and users to ensure that equipment and systems are designed
and operated as intended. Identical to and reproduced from IEC 60601-1-2:2004.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 108 pages

3200.1.3:1996 Collateral standard - Requirements for radiation protection in diagnostic X-ray equipment
Specifies protective measures to be taken by manufacturers in the design and construction of medical diagnostic equipment and its
subassemblies.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 51 pages

3200.1.4:1997 Collateral Standard - Programmable electrical medical systems


Specifies requirements for the process by which a programmable electrical medical system is designed. Identical with and
reproduced from IEC 60601-1-4:1996.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

3200.1.8:2005 Collateral Standard - General requirements, tests and guidance for alarm systems in
medical electrical equipment and medical electrical systems
Specifies requirements for alarm systems and alarm signals in medical electrical equipment and medical electrical systems. Also
provides guidance for the application of alarm systems. Identical and reproduced from IEC 60601-1-8:2003.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 84 pages

3200.2:- Particular requirements for safety

3200.2.1:1999 Electron accelerators in the range of 1 MeV to 50 MeV


Specifies requirements to be complied with by the manufacturer in the design and construction of electron accelerators for use in
radiotherapy. It is identical with and has been reproduced from IEC 60601-2-1:1998. This Standard refers extensively to its Parent
Standard, AS/NZS 3200.1.0. A readily available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages

3200.2.2:1999 High frequency surgical equipment


Specifies requirements for the safe design and manufacture of high frequency surgical equipment. This Standard modifies and has
been reproduced from IEC 60601-2-2:1998 with a ZZ Appendix for additional Australian and New Zealand requirements. A thorough
working knowledge of its Parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with some of the
technical issues raised.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

3200.2.3-1992 (Withdrawn)

3200.2.4:2006 Cardiac defibrillators


Specifies requirements for the safety of cardiac defibrillators. Does not apply to implantable defibrillators, remote control
defibrillators, external transcutaneous pacemakers, or separate stand alone cardiac monitors. Cardiac monitors which use separate
ECG monitoring electrodes are not within the scope of the Standard unless they are used as the sole basis for AED rhythm
recognition detection or beat detection for synchronized cardioversion. Identical to and reproduced from IEC 60601-2-4:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 64 pages

3200.2.5:2002 Ultrasonic physiotherapy equipment


Specifies requirements for the safety of ultrasonic physiotherapy equipment used in medical practice. It modifies, and has been
reproduced from, IEC 60601-2-5:2000 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

3200.2.6:2005 Microwave therapy equipment


Provides requirements for the safety of microwave therapy equipment used in medical practice. Does not apply to equipment
specified for hyperthermia. Adopts IEC 60601-2-6:1984 with national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

3200.2.7:1999 High voltage generators of diagnostic X-ray generators


Specifies particular requirements for the safety of high voltage X-ray generators. It is based on but not equivalent to and reproduced
from IEC 60601-2-7:1998 with additional requirements for Australia and New Zealand provided in an appendix. This Standard refers
to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of
this part.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

3200.2.8:1994 Therapeutic X-ray generators


Applies to therapeutic X-ray generators that operate within nominal X-ray tube voltages from 10 kV to 400 kV inclusive when
connected to alternating current supply mains. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test
specification - Medical electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced
from IEC 60601-2-8:1987.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

3200.2.9:1997 Patient contact dosemeters used in radiotherapy with electrically connected detectors
Specifies safety requirements for the design and manufacture of patient contact dosemeters used in radiotherapy with electrically
connected detectors. This Standard is identical with and has been reproduced from IEC 60601-2-9:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

3200.2.11:1999 Gamma beam therapy equipment


Specifies requirements for the safety of gamma beam therapy equipment used in medical practices on human patients. This
Standard is identical with and has been reproduced from IEC 60601-2-11:1997. This Standard refers extensively to its Parent
Standard, AS/NZS 3200.1.0. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 42 pages

3200.2.13:2005 Anaesthetic systems


Provides safety and essential requirements for an anaesthetic system as well as individual devices designed for use in an
anaesthetic system. Does not apply to anaesthetic systems intended for use with flammable anaesthetic agents, portable
anaesthetic systems for use in remote sites, open fields for rescue operations or in disaster areas, or to dental analgesia apparatus.
Identical to and reproduced from IEC 60601-2-13:2003.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 50 pages

3200.2.14-1992 (Withdrawn)

3200.2.15:1994 Capacitor discharge X-ray generators


Applies to capacitor discharge X-ray generators operating in intermittent mode for medical radiography, in which the electrical energy
for loading of the X-ray tube is completely or mainly capacitively stored at, and switched in, the high-voltage circuit. It is
supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical electrical equipment, Part 1: General
requirements for safety. This standard is identical to and reproduced from IEC 60601-2-15:1988.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

3200.2.16:1999 Haemodialysis, haemodiafiltration and haemofiltration equipment


Specifies particular requirements for the safety of haemodialysis, haemodialfiltration and haemofiltration equipment. It is identical
with and reproduced from IEC 60601-2-16:1998. This Standard refers extensively to its Parent Standard, AS/NZS 3200.1.0:1998. An
available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

3200.2.17:1994 Remote-controlled automatically driven gamma-ray afterloading equipment


Applies to remote-controlled automatically driven electro-medical equipment for gamma-ray therapy of human subjects using
afterloading. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical electrical equipment,
Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 60601-2-17:1989.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

3200.2.18:1997 Endoscopic equipment


Specifies requirements for the safety of endoscopic equipment and its interconnections with endoscopically-used accessories. It is
based on and reproduced from IEC 60601-2-18:1996 and includes the full technical text of that Standard. An Appendix ZZ specifies
additional requirements applicable in Australia and New Zealand.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

3200.2.21:1994 Infant radiant warmers


Applies to infant warmers using a radiant heating source. The device is intended to maintain the thermal balance of an infant patient
by direct radiation of energy in the infra-red region of the electromagnetic spectrum. It is supplementary to AS 3200.1-1990/NZS
6150:1990 Approval and test specification - Medical electrical equipment, Part 1: General requirements for safety. This standard is
identical to and reproduced from IEC 60601-2-21:1994.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

3200.2.22:1997 Diagnostic and therapeutic laser equipment


Specifies particular requirements for the safety of laser equipment for medical applications classified as Class 3B or Class 4 laser
product. It is technically equivalent to IEC 60601.2.22 :1995 and incorporates an Appendix ZZ of additional requirements for
Australia and New Zealand.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

3200.2.23:2001 Transcutaneous partial pressure monitoring equipment


Specifies the particular requirements for the safety, including essential performances, of transcutaneous partial pressure monitoring
equipment, and applies to equipment used with adults, children and neonates, including their use in foetal monitoring during birth. It
does not apply to haemoglobin saturation oximeters or to devices applied to surfaces of the body other than the skin. This Standard
is to be read in conjunction with AS/NZS 3200.1.0:1998. It is identical with, and reproduced from, IEC 60601-2-23:1999.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 30 pages

3200.2.24:1999 Infusion pumps and controllers


Provides particular requirements for the safety of infusion pumps, infusion controllers, syringe pumps and pumps for ambulatory use.
A thorough working knowledge of its parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with
some of the technical issues raised. This Standard is technically equivalent to and has been reproduced from IEC 60601-2-24:1998.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 60 pages

3200.2.25:1993 Electrocardiographs
Specifies the particular safety requirements for electrocardiographs intended for the production of detachable electrocardiograms for
diagnostic purposes. It also applies to vectorcardiographs. It is supplementary to AS 3200.1-1990/NZS6150:1990 Approval and test
specification - Medical electrical equipment, Part 1: General requirements for safety, and is technically equivalent to IEC 60601-2-
25:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

3200.2.26:2005 Electroencephalographs
Specifies requirements for electroencephalographs. The Standard does not cover the special requirements for other equipment also
used in electroencephalography. Identical to IEC 60601-2-26:2002.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

3200.2.27:1996 Electrocardiographic monitoring equipment


Specifies the particular safety requirements electrocardiographic (ECG) monitoring equipment, excluding certain types of ambulatory
and telemetric devices. Technically equivalent to IEC 60601-2-27:1994.
Includes Appendix ZZ which details variations to the application of IEC 60601-2-27:1994 in Australia and New Zealand.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

3200.2.28:1994 X-ray source assemblies and X-ray tube assemblies for medical diagnosis
Applies to X-ray source assemblies and X-ray tube assemblies for medical diagnosis and to components thereof, specified for use in
medical X-ray equipment including equipment for computed tomography incorporating a specified high voltage generator complying
with IEC 601-2-7 or IEC 601-2-15. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical
electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 60601-2-
28:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

3200.2.29:2000 Radiotherapy simulators


Specifies requirements for the safe design and manufacture of radiotherapy simulators. A thorough knowledge, or a readily available
copy, of the parent Standard AS/NZS 3200.1.0:1998, is necessary to deal with some of the technical issues raised. This Standard
has been reproduced from IEC 60601.2.29:1999, but includes a ZZ Appendix of supplementary requirements for Australia and New
Zealand.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

3200.2.30:2001 Automatic cycling non-invasive blood pressure monitoring equipment


Specifies the particular requirements for the safety, including essential performances, of automatic cycling non-invasive blood
pressure monitoring equipment, which may be attended or unattended. It does not apply to blood pressure measuring equipment,
which may be attended or unattended. It does not apply to blood pressure measuring equipment which uses finger transducers or to
semi-automatic blood pressure measuring equipment, typically in which each determination needs to be initiated manually. This
Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies and has been reproduced from IEC 60601-2-30:1999
with variations for Australia and New Zealand included in Appendix ZZ.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

3200.2.31:1996 External cardiac pacemakers with internal power source


Specifies the particular safety requirements for external pacemakers used to pace patients prior to the implanting of an internal
pacemaker or for temporary pacing related to other medical procedures. This standard is identical to and reproduced from IEC
60601-2-31:1994.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

3200.2.32:1994 Associated equipment of X-ray equipment


Applies to equipment and devices associated with X-ray equipment for supporting and positioning the functional components used
for the application of the X-radiation. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification -
Medical electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 60601-
2-32:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

3200.2.33:2005 Magnetic resonance equipment for medical diagnosis


Specifies requirements for magnetic resonance equipment and magnetic resonance systems. Does not cover the application of
magnetic resonance equipment beyond the intended use. Adopted from IEC 60601-2-33:2002 with national modifications.
Joint Australian/New Zealand Standard
$219.95+GST (Members), $274.94+GST (Retail), 88 pages

3200.2.34:1996 Direct blood-pressure monitoring equipment


Specifies medical electrical equipment, including transducers, used for monitoring and recording the internal blood-pressure of
patients. This standard is identical to and reproduced from IEC 60601-2-34:1994.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages
3200.2.35:1999 Blankets, pads and mattresses intended for heating in medical use
Specifies safety requirements for the design and manufacture of blankets, pads and mattresses, intended for heating in medical use.
It is identical with and has been reproduced from IEC 60601-2-35:1996. This Standard refers to its Parent Standard, AS/NZS
3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this part.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

3200.2.36:1998 Extracorporeally induced lithotripsy


Specifies safety requirements for the design and manufacture of devices (lithotripters) intended to generate acoustic pulses from
outside the human body for the purpose of fragmenting calculi (`stones`) within the body. This Standard is identical to and has been
reproduced from IEC 60601-2-36:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

3200.2.38:2007 Electrically and manually operated medical beds for adult use
Specifies safety requirements for the design and manufacture of electrically operated hospital beds, including requirements for side
rails and prevention of entrapment, and variations for Australian/New Zealand use.. Identical with and has been reproduced from IEC
60601-2-38:1996, Amendment 1:1999.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages

3200.2.39:2001 Peritoneal dialysis equipment


Specifies requirements for the design and manufacture of electrically safe peritoneal dialysis equipment. This Standard is identical
with and reproduced from IEC 60601-2-39:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

3200.2.40:1999 Electromyographs and evoked response equipment


Specifies safety requirements for the design and manufacture of electromyographs and evoked response equipment. It is identical
with and has been reproduced from IEC 60501-2-40:1998. This Standard refers extensively to its Parent Standard, AS/NZS
3200.1.0. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

3200.2.41:2002 Surgical luminaires and luminaires for diagnosis


Specifies the requirements to be applied to surgical luminaires and luminaires for diagnosis. Does not apply to headlights,
endoscopes, laparoscopes and their light sources, luminaires used in dentistry, luminaires for general purposes and luminaires of an
emergency lighting. This Standard is to be read in conjunction with AS/NZS 3200.1.1:1998. It modifies, and has been reproduced
from, IEC 60601-2-41:2000 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 33 pages

3200.2.43:2002 X-ray equipment for interventional procedures


Applies to X-ray equipment declared by the manufacturer to be suitable for prolonged radioscopically guided interventional
procedures. Does not apply to equipment for radiotherapy, equipment for computed tomography, accessories intended to be
introduced into the patient, and mammographic X-ray equipment. This Standard modifies, and has been reproduced from, IEC
60601-2-43:2000 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages

3200.2.44:2005 X-ray equipment for computed tomography


Specifies requirements for X-ray equipment for computed tomography (CT Scanners). Includes safety requirements for the X-ray
generator and those where high voltage generators are integrated with an X-ray tube assembly. Reproduced from and identical to
IEC 60601-2-44:2002.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

3200.2.45:1998 Mammographic X-ray equipment and mammographic stereotactic devices


Specifies particular requirements for the safe design and manufacture of mammographic X-ray equipment and mammographic
stereotactic devices. A thorough working knowledge of its parent Standard AS/NZS 3200.1.0, or a readily available copy, is
necessary to deal with some of the technical issues raised. It is identical with and reproduced from IEC 60601-2-45:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
3200.2.46:2003 Operating tables
Specifies the safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the
transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This standard is
identical with and has been reproduced from IEC 60601-2-46:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

3200.2.200:2005 Oxygen concentrators for individual patient use


Specifies safety requirements for continuous-flow oxygen concentrators. Does not apply to oxygen concentrators intended to supply
gas to several patients via a piped medical gas installation or to those intended for use in the presence of flammable anaesthetic
and/or cleaning agents. Identical to and reproduced from ISO 8359:1996.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 36 pages

3200.2.201:2000 Dento-maxillofacial X-ray equipment


Specifies requirements for the design and manufacture of dento-maxillofacial X-ray equipment. It is a locally developed Standard,
that follows the style and technical prerequisites of IEC 60601-1. It refers to AS/NZS 3200.1.0, the local version of IEC 60601-1, and
should be read in conjunction with AS 3200.1.0.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

3200.2.202:1996 Infant apnoea monitors for domestic use


Specifies general requirements for the safety of infant apnoea monitoring equipment, for domestic use.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

3200.3.1:1998 Essential performance requirements for transcutaneous oxygen and carbon dioxide partial
pressure monitoring equipment
Specifies essential requirements for the performance of transcutaneous oxygen and carbon dioxide partial pressure monitoring
equipment. It is identical with and has been reproduced from IEC 60601-3-1:1996.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 3203:1978 (Withdrawn)

NZS/AS 3209:1986 (Superseded by NZS/AS 3200.2.3)

NZS/AS 3210:1986 (Superseded by NZS/AS 3200.2.6)

NZS/AS 3211:1986 (Superseded by NZS/AS 3200.2.5)

AS/NZS 3250:1995 (Superseded by AS/NZS 60065:2000)

AS/NZS 3260:1993 (Superseded by AS/NZS 60950:2000)

AS/NZS 3260, Supplement 1:1996(Withdrawn)

BS 3288, Part 1:1973 (Withdrawn)

NZS/BS 3300:1985 (Withdrawn)

NZS 3302:1983 (Withdrawn)


AS/NZS 3302:1992 (Superseded by AS/NZS 3350.2.80:1998)

NZS 3331:1972 (Withdrawn)

AS/NZS 3350:- Safety of household and similar electrical appliances

3350.1:2002 General requirements


Specifies general safety requirements for approval and test purposes. This Standard is an adoption with national modifications and
contains the full text of IEC 60335-1:1991.
Reprinted to incorporate Amendments 1, 2, 3 & 4
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 140 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2:- Particular requirements

3350.2.2:2001 Vacuum cleaners and water suction cleaning appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1 which,
when combined, become a complete Standard for vacuum cleaners and water suction cleaning appliances. This standard is
technically equivalent to and reproduced from IEC 60335-2-2:1993.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 27 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.3:1995 Electric irons


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994
which, when combined, become a complete Standard for electric irons. This standard is technically equivalent to and reproduced
from IEC 60335-2-3:1993.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.4:1998 Spin extractors


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to and has been reproduced from IEC 60335-2-4:1993.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.5:1995 Dishwashers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994
which, when combined, become a complete Standard for dishwashers. This standard is technically equivalent to and reproduced
from IEC 60335-2-5:1992.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.6:2006 Stationary cooking ranges, hobs, ovens and similar appliances


Deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage
being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances.
Examples of appliances which are within the scope of this standard are stationary grills; stationary griddles; pyrolytic self-cleaning
ovens; induction hobs; steam ovens; the electrical part of appliances supplied with energy other than electricity. Does not apply to
appliances intended exclusively for industrial purposes. appliances intended to be used in locations where special conditions prevail,
such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas), portable cooking appliances, microwave cooking
appliances, commercial electric ranges, ovens and hob elements, commercial electric griddles and griddle grills, commercial electric
forced convection ovens, steam cookers and steam convection ovens. Based on IEC 60335-2-6:1997 with national modifications.
Will be superseded by AS/NZS 60335.2.6:2008 on 22 November 2009; Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 55 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.7:2001 Washing machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1 which,
when combined, become a complete Standard for washing machines. This Standard is technically equivalent to and reproduced
from IEC 60335-2-7:2000.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.8:1995 Shavers, hair clippers and similar appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:14 which,
when combined, become a complete Standard for shavers, hair clippers and similar appliances. This standard is technically
equivalent to and reproduced from IEC 60335-2-8:1992.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.9:1999 Grills, toasters and similar portable cooking appliances


Specifies particular safety requirements for approval and test purposes. The Standard is to be read in conjunction with AS/NZS
3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-9:1993.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.10:1996 Floor treatment machines and wet scrubbing machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-10:1992.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.11:2001 Tumble dryers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to and has been reproduced from IEC 60335-2-11:2000.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.12:1997 Warming plates and similar appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-12:1992.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.13:2001 Deep fat fryers, frying pans and similar appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-13:1993.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.14:1995 Kitchen machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994
which, when combined, become a complete Standard for kitchen machines. This standard is technically equivalent to and
reproduced from IEC 60335-2-14:1994.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2008 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.15:2002 Appliances for heating liquids


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:2002.
This Standard is technically equivalent to and reproduced from IEC 60335-2-15:1995.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.16:1996 Food waste disposers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-16:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.17:2000 Blankets, pads and similar flexible heating appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and reproduced from IEC 60335-2-17:1998.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 45 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.21:1999 Storage water heaters


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and has been reproduced from IEC 60335-2-21:1997.
Reprinted to incorporate Amendments 1 to 5
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages
Amendment 2, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 5, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.23:2001 Appliances for skin and hair care


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-23:1996.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 27 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2008 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.24:2001 Refrigerating appliances, ice-cream appliances and ice-makers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to IEC 60335-2-24:1997.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.25:2001 Microwave ovens


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-25:1996.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 31 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.26:1996 Clocks
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-26:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.27:1996 Appliances for skin exposure to ultraviolet and infrared radiation


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-27:1995.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.28:1996 Sewing machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-28:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.29:2001 Battery chargers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-29:1994.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 21 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.30:2007 Room heaters


Deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for
single-phase appliances and 480 V for other appliances. Some clauses of the 2007 edition which have an application date of 25
November 2007 are identified by a marginal bar in the appropriate place.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.31:2001 Range hoods


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-31:1995.
Superseded by AS/NZS 60335.2.31:2004 but remains current until 15 October 2011; Reprinted to incorporate Amendment 1:2005
and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.32:2001 Massage appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-32:1993.
Superseded by AS/NZS 60335.2.32:2004 but remains current until 15 October 2011; Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.34:2001 Motor-compressors
Deals with the safety of sealed (hermetic and semi-hermetic) motor-compressors, and their protection and control systems. It applies
to motor-compressors tested separately, intended for household and similar appliances, by their rated voltage being not more than
250V for single-phase motor-compressors and 480V for other motor-compressors. Examples of equipment which contain motor-
compressors are: refrigerators, ice makers, air-conditioners, heat pumps, and vending machines.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.35:1999 Instantaneous water heaters


Specifies particular safety requirements for approval and test purposes. The Standard is to be read in conjunction with AS/NZS
3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-35:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.40:2001 Electrical heat pumps, air-conditioners and dehumidifiers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-40:1995.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 43 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.41:1997 Pumps
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-41:1996.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)
3350.2.43:2001 Clothes dryers and towel rails
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-43:1995.
Reprinted to incorporate Amendment 1:2003 and Amendment 2:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 15 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.44:1999 Ironers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and has been reproduced from IEC 60335-2-44:1997.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.45:1997 Portable heating tools and similar appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-45:1996. Reprinted to incorporate Amendment 1:1998
and Amendment 2:2001.
Superseded by AS/NZS 60335.2.45:2004 but remains Current until 15 October 2011; Reprinted to incorporate Amendments 1, 2 &
3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.51:1998 Stationary circulation pumps for heating and service water installations
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is equivalent to and has been reproduced from IEC 60335-2-51:1997.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.52:1996 Oral hygiene appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-52:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.53:1998 Sauna heating appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to and has been reproduced from IEC 60335-2-53:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.54:1997 Surface cleaning appliances for household use employing liquids or steam
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-54:1995.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.55:1998 Electrical appliances for use with aquariums and garden ponds
Specifies particular safety requirements for electrical appliances for use with aquariums and garden ponds for approval and test
purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been
reproduced from IEC 60335-2-55:1997.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.56:1998 Projectors and similar appliances


Specifies particular safety requirements for projectors and similar appliances for approval and test purposes. It is to be read in
conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-
56:1997.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.59:1999 Insect killers


Specifies particular safety requirements for approval and test purposes. The Standard is to be read in conjunction with AS/NZS
3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-59:1997.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.60:2000 Whirlpool baths


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-60:1997.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.61:2001 Thermal storage room heaters


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-61:1992.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.65:1997 Air-cleaning appliances


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-65:1993.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)
3350.2.66:1997 Water-bed heaters
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and reproduced from IEC 60335-2-66:1993.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.73:1996 Fixed immersion heaters


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-73:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.74:2001 Portable immersion heaters


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-74:1994.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.75:2001 Commercial dispensing appliances and vending machines


Specifies particular safety requirements for approval and test purposes. To be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-75:1995.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.76:1998 Electric fence energizers


Specifies particular safety requirements for electric fence energizers for approval and test purposes. It is to be read in conjunction
with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-76:1997.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.78:1996 Outdoor barbecues


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-78:1995.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.79:2001 High pressure cleaners and steam cleaners, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-79:1995.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.80:1998 Fans
Specifies particular safety requirements for electric fans for approval and test purposes. It is to be read in conjunction with AS/NZS
3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-80:1997.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.81:1998 Foot warmers and heating mats


Specifies safety requirements for foot warmers and heating mats. This Standard is technically equivalent to and has been
reproduced from IEC 60335-2-81:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.82:2000 Service machines and amusement machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-82:1999.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.84:2000 Toilets
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-84:1998.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.85:1998 Fabric steamers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and has been reproduced from IEC 60335-2-85:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.95:2000 Drives for vertically moving garage doors for residential use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-95:1998.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.97:2000 Drives for rolling shutters, awnings, blinds and similar equipment
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-97:1998.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

3350.2.98:1998 Humidifiers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This
Standard is technically equivalent to and has been reproduced from IEC 60335-2-98:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 3395:1989 (Withdrawn)

NZS 3401:1995 (Withdrawn)

NZS 3402:1989 (Superseded by AS/NZS 4671:2001)

NZS 3403:1978 (Withdrawn)

NZS 3404: Parts 1 & 2:1997 Steel Structures Standard


Part 1 sets out minimum requirements for the design, fabrication, erection and modification of steelwork in structures in accordance
with the limit state design method or in accordance with the alternative design method. Part 2 provides background material to the
requirements of Part 1. Gives the origin of certain requirements, departures from previous practice, and explains the application of
certain clauses.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Cited in BIA Approved Document B1/VM1
$309.95+GST (Members), $387.44+GST (Retail), 679 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $84.95+GST (Members), $106.19+GST (Retail)

NZS 3415:1995 (Withdrawn)

NZS 3421:1975 (Superseded by AS/NZS 4671:2001)

NZS 3422:1975 (Superseded by AS/NZS 4671:2001)

AS/NZS 3439:- Low-voltage switchgear and controlgear assemblies

3439.1:2002 Type-tested and partially type-tested assemblies


Applies to type-tested and partially type-tested low-voltage switchgear and controlgear assemblies. Specifies service conditions,
construction requirements, technical characteristics and tests. This Standard contains the full text of IEC 60439-1:1999 but has been
modified for Australian/New Zealand conditions.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 130 pages

3439.2:2002 Particular requirements for busbar trunking systems (busways)


Specifies requirements for busbar trunking systems (busways) for use on systems with rated voltages up to 1000 Hz, or 1500 V d.c.
Applies to busbar trunking systems and their accessories for feeding and distributing electrical power in residential, retail, public,
agricultural and industrial premises. Also applies to busbar trunking systems designed to incorporate communications and/or control
systems or intended to supply luminaires through tap-off units. This Standard is identical with and has been reproduced from IEC
60439-2:2000.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 30 pages

3439.3:2002 Particular requirements for low-voltage switchgear and controlgear assemblies intended to
be installed in places where unskilled persons have access for their use - Distribution
boards
Specifies supplementary requirements to AS/NZS 3429.1 for enclosed distribution boards containing protective devices and intended
for installation in places where unskilled persons have access for their use. Reproduced from IEC 60439-3 consolidated edition 1.2,
which incorporates its Amendment 1:1993 and amendment 2:2001 into IEC 60439-3:1990. Contains variations for Australian and
New Zealand conditions.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 22 pages

3439.5:2001 Particular requirements for assemblies intended to be installed outdoors in public places -
Cable distribution cabinets (CDCs) for power distribution in networks
Specifies supplementary requirements for cable distribution cabinets (CDCs), which are stationary, type-tested assemblies (TTA) for
outdoor installation in places which are exposed to the public, but where only skilled persons have access for their use and which are
for use in public three-phase systems. This Standard is identical with and has been reproduced from IEC 60439-5:1996 and
incorporates Amendment 1:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

NZS 3441:1978 (Superseded by NZS/AS 1397)

NZS 3471:1974 Specification for galvanized steel fencing wire. Plain and barbed
Specifies mechanical properties and quality of galvanizing for plain wire in 2 tensile grades and sizes from 2.0 to 4.5 mm diameter,
plus two grades of barbed wire.
Reprinted incorporating Amendment 1
$34.95+GST (Members), $43.69+GST (Retail), 12 pages
Amendment 1, 1976 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 3481.3-1974 (Withdrawn)

NZS/BS 3492:1987 Specification for road and rail tanker hoses and hose assemblies for petroleum products,
including aviation fuels
Eight types of hoses for conveying gasoline fuels and oils, including aviation fuels having an aromatic hydrocarbon content of not
more than 50%, at temperatures up to 80 degrees C and a vacuum not exceeding 500 mbar.
Adopted Standard
$121.21+GST (Members), $151.51+GST (Retail), 12 pages

AS/NZS 3497:1998 Drinking water treatment units - Plumbing requirements


Specifies requirements for the construction, installation and testing of drinking water treatment units and equipment, or appliances, or
both, designed for domestic type applications under Australian and New Zealand climatic conditions, but does not preclude their use
for commercial or industrial applications. These appliances are designed to be used for the reduction of specific groups of
contaminants from a drinking water supply (public or private), such contaminants being specified by the manufacturer or reseller of
the appliances. The Standard establishes minimum requirements for point of use (POU), point of entry (POE) and stand-alone
appliances.
Reprinted to append Amendment 1:2001
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3499:2006 Water supply - Flexible hose assemblies


Specifies requirements for flexible hose assemblies for use with both heated water and cold-water supplies with a maximum heated
water temperature of 90°C used for applications aboveground, accessible and not submerged. Nominal sizes range up to DN 20, a
maximum length of 2 m and with a working pressure not exceeding 1.4 MPa at 20°C.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS 3500:- Plumbing and drainage

3500.0:2003 Glossary of terms


This Standard is intended for use in the interpretation of terminology used in the various parts of the Plumbing and Drainage series
of Standards.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 66 pages
3500.1:2003 Water services
This Standard sets out the requirements for the installation of water services from the point of connection to the Network Utility's
water supply or from an alternative drinking water supply to the points of discharge. This Standard applies to new installations as well
as alterations, additions and repairs to existing installations.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 111 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

3500.2:2003 Sanitary plumbing and drainage


This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a
sewer, common effluent system or an on-site wastewater management system, as appropriate. The Standard applies to new
installations as well as alterations, additions or repairs to existing installations. Illustrations used in this Standard are diagrammatic
only and have been chosen without prejudice. NOTE: The pre-treatment of trade wastes is not specified in this Standard.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 152 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

3500.3:2003 Stormwater drainage


Provides criteria for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil
drainage systems to a point of connection.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 173 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

3500.4:2003 Heated water services


This Standard sets out the requirements for the design and installation of heated water services. It includes aspects of the installation
from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures
and fittings.
Reprinted to append Amendment 1:2005
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 125 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

3500.5:2000 Domestic installations


Specifies the requirements for the installation of hot and cold water supply, sanitary plumbing and drainage, and stormwater
drainage, for domestic plumbing work associated with buildings not exceeding three floors in height.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 275 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2006 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation
Specifies chemical composition, mechanical properties and dimensions for tubes of 10 to 300 mm nominal bore. Dimensionally
compatible with superseded Imperial range.
Reprinted to append Amendments 1, 2 & 3
Cited in BIA Approved Documents G10/AS1 & G12/AS1
$39.95+GST (Members), $49.94+GST (Retail), 13 pages
Amendment 1, 1983 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1987 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3502:1976 (Withdrawn)

NZS 3504:1979 Specification for aluminium windows


Specifies the design, materials, manufacture and finish of aluminium alloy windows, and certain types of doors, meeting the
performance requirements of NZS 4211. Amendment No. 1 (1988) updates the Standard and provides for the removal of minimum
wall thickness requirements as specified in respect of structural parts of frame members.
Reprinted to append Amendment 1:1988
$39.95+GST (Members), $49.94+GST (Retail), 14 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3504:2006 Fire blankets


Sets out specific requirements of fire blankets for the control of small cooking fires and clothing fires.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3509:2009 LP gas fuel vessels for automotive use


Specifies requirements for welded carbon steel LP gas fuel vessels of total internal volume not greater than 500 L, and for welded
stainless steel LP gas fuel vessels of total internal volume not greater than 200 L, intended for automotive and marine installations.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 36 pages

AS/NZS 3512:2000 Information technology - Telecommunications and information exchange between systems
- High-level data link control procedures - Description of the X.25 LAPB-compatible DTE
data link procedures
Specifies the protocol between data terminal equipment and data circuit-terminating equipment at data link layer level using the X.25
LAPB procedures. This Standard is identical with and has been reproduced from ISO/IEC 7776:1995 and ISO/IEC 7776:1995/Amd
1:1996.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 67 pages

AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure
applications
Specifies performance requirements for ABS compounds (ABS 120, ABS 140 and ABS 160), pipes and fittings for the conveyance of
liquids under pressure in applications above and below ground.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3548:1995 (Superseded by AS/NZS CISPR 22:2002)

NZS/BS 3551:1962 (Withdrawn)

AS/NZS 3551:2004 Technical management programs for medical devices


Specifies procedures for procurement, acceptance, fault management, routine testing and disposal of medical devices.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 50 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3558.12:1995 (Withdrawn; use AS 3558.12-1999)

AS/NZS 3560:- Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working
voltages up to and including 0.6/1(1.2)kV

3560.1:2000 Aluminium conductors


Specifies the construction, dimensions and tests for two, three and four core aerial bundled cables having aluminium conductor sizes
between 16 mm2 and 150 mm2.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

3560.2:2003 Copper conductors


Specifies the construction, dimensions and tests for 0.6/1 (1.2) kV rated cross-linked polyethylene insulated aerial bundled cables
with two, three or four cores having hard drawn copper conductors with cross-sectional areas of 6, 10, 16 and 25 mm2.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS/AS 3563:- (Withdrawn)

NZS/AS 3566:1988 (Withdrawn)

AS/NZS 3572:- Plastics - Glass filament reinforced plastics (GRP) - Methods of test

3572.18:1997 Method for determining the ultimate tensile strength and unit modulus of flat laminates
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

3572.19:1997 Method for the determination of the lap shear strength of laminate
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

3572.20:1997 Method for the determination of the peel strength of the bond between laminate layers
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

3572.21:1997 Method for the determination of the shear strength of a sandwich panel
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3572.22:1997 Method for the determination of hardness by means of a Barcol impressor


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3572.23:1997 Method for the determination of the initial longitudinal tensile strength by means of a
tensile plate test
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3572.24:1997 Method for the determination of the initial hoop tensile strength by means of a tensile plate
test
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 3576:1998 Clearing saws, brushcutters and grass trimmers - Guide to safe working practices
Provides recommendations for the safe use of clearing saws, brushcutters and grass trimmers. Guidelines are given covering the
basic principles for the safe operation of the equipment, the training of operators, the appropriate measures and precautions to take
to guard the safety and health of operators, and the general maintenance of the equipment.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 3580 Methods for sampling and analysis of ambient air

AS/NZS 3580.1.1:2007 Guide to siting air monitoring equipment


Sets out general guidelines to the siting of air monitoring equipment and specifies a number of siting parameters for individual air
pollutants. The Standard does not include the detailed design of a network of monitoring units.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 24 pages

AS/NZS 3580.2 Preparation of reference test atmospheres

AS/NZS 3580.2.2:2009 Compressed gas method


Sets out a method for the preparation of reference test atmospheres containing known concentrations of determinand(s), using a
calibration gas dilution method. The method is applicable to components that do not react with each other, the cylinder walls or the
dilution gas, and that remain totally vaporized in the cylinder at all pressures and temperatures anticipated during the preparation
and use of the reference test atmosphere.
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 3580.9 Determination of suspended particulate matter

AS/NZS 3580.9.3:2003 Total suspended particulate matter (TSP) - High volume sampler gravimetric method
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a
measure of mean concentration of TSP over the sampling period employed.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 3580.9.6:2003 PM10 high volume sampler with size selective inlet - Gravimetric method
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a measure
of mean concentration of PM10 over the sampling period employed.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 3580.9.7:2009 Dichotomous sampler (PM10, coarse PM and PM2.5) - Gravimetric method
Sets out a gravimetric procedure for the concurrent determination of the PM10 and PM2.5 fractions of suspended particulate matter
in ambient air collected in a dichotomous sampler. The method provides a measure of the mean concentration of PM10 over the
sampling period of the two size fractions, viz. the fine fraction (less than approximately 2.5 µm) and the coarse fraction (2.5 µm to 10
µm). A procedure for assessing the performance of dichotomous samplers so that they comply with the sampling requirements of
this method, is described in Appendix A.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 16 pages

AS/NZS 3580.9.9:2006 PM10 low volume sampler - Gravimetric method


Provides regulatory and testing bodies with a standard method for determining suspended particulate matter with an equivalent
aerodynamic diameter of less than 10 µm utilizing a low volume sampler and size selective inlet.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZ 3580.9.10:2006 PM2.5 low volume sampler - Gravimetric method


Sets out a standard method for determining suspended particulate matter with an equivalent aerodynamic diameter of less than 2.5
micrometre utilizing a low volume sampler and size selective inlet.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 3580.9.11:2008 PM10 beta attenuation monitors


Provides regulatory and testing bodies with a method for continuously monitoring suspended particulate matter changes of particles
less than 10 micrometres in ambient air, providing near real time measurement of mean particle concentration.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 3580.10 Determination of particulate matter

AS/NZS 3580.10.1:2003 Deposited matter - Gravimetric method


Sets out a method for the sampling of particulate matter that is deposited from the atmosphere, and procedures for the gravimetric
determination of the mass deposition rate of insoluble solids, ash, combustible matter, soluble solids and total solids from ambient
air.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 3580.12 Determination of light scattering

AS/NZS 3580.12.1:2001 Integrating nephelometer method


Specifies a continuous direct reading instrumental method of determining light scattering produced by fine particles in a sample of
ambient air. The light scattering coefficient determined by this Standard is an indicator of the perceived visual degradation caused by
suspended particles in air. The method is not designed to measure light scattering due to suspended water droplets.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 3582:- Supplementary cementitious materials for use with portland and blended cement

3582.3:2002 Amorphous silica


Sets out requirements for amorphous silica as a supplementary material for use in concrete, mortar and grout.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 3584 Diesel engine systems for underground coal mines

AS/NZS 3584.1:2008 Fire protected - Heavy duty


Specifies safety requirements for diesel engine systems that are fire protected for use in designated safe areas in underground coal
mines. It applies to diesel engine systems with heavy duty applications.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 68 pages

AS/NZS 3584.2:2008 Explosion protected


Allows for the implementation of new technology in diesel engine systems, including the use of dry exhaust systems, limiting the
emission of diesel aerosol particulates and generally reducing the emission of pollutants. New measures have been included to
provide a greater assurance of safety by preventing the propagation of an internal explosion.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 92 pages

AS/NZS 3584.3:2005 Maintenance


Specifies requirements for maintenance of diesel engine systems for underground coal mines complying with AS 3584.1 and AS
3584.2. Includes requirements for personnel, workshops, management systems, maintenance procedures and testing.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 32 pages

AS/NZS 3594:1994 Information technology - Telecommunications and information exchange between systems
- Interface connector and contact assignments for ISDN basic access interface located at
reference points S and T
Specifies the 8-pole connector (including the poles-contacts assignments) for use in physical interfaces of the ISDN network. This
standard is identical to and reproduced from ISO/IEC 8877:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 3598:2000 Energy Audits


Assists energy users to decide what level of audit is appropriate for their needs, providing a guide when commissioning energy
audits and a uniform basis for preparing and comparing energy audit proposals. It also aims to establish best practice for energy
auditors, support the establishment of energy management programs and contribute to the quality of existing energy and other
management systems.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 3599:- Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and
12.7/22(24) kV

3599.1:2003 Metallic screened


Specifies the construction, dimensions, and test requirements for steel wire supported, three-core aerial bundled cable, having
individually screened phase cables insulated with cross-linked polyethylene, sheathed with high density polyethylene.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 19 pages

3599.2:1999 Non-metallic screened


Specifies the construction, dimensions and test requirements for three phase, aerial bundled cables incorporating a support
conductor, insulated with cross-linked polyethylene and non-metallic screened (without further protection).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

NZMP 3600.1:1992 (Superseded by NZS 3604:1999)

NZS 3601:1973 Metric dimensions for timber


Specifies a preferred range of lengths and cross-sectional dimensions for dry dressed and green gauged timber in metric measure.
Reprinted incorporating Amendments 1& 2
Cited in BIA Approved Document B1/AS2
$34.95+GST (Members), $43.69+GST (Retail), 8 pages
Amendment 1, 1973 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1975 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 3601:1987 Specification for carbon steel pipes and tubes with specified room temperature properties
for pressure purposes
Plain end, welded and seamless carbon steel tubes suitable for general purposes.
Cited in BIA Approved Document G10/AS1 and G14/VM1
Adopted Standard
$193.94+GST (Members), $242.43+GST (Retail), 16 pages

NZS 3602:2003 Timber and wood-based products for use in building


This Standard gives the requirements for timber and wood-based products for particular uses in building so that they can be
expected to give acceptable performance during the life of the building. To that end this Standard covers the materials themselves
and aspects of design and construction that are relevant to their performance in use.
Cited in BIA Approved Document B2/AS1
$119.95+GST (Members), $149.94+GST (Retail), 44 pages

NZS 3603:1993 Timber Structures Standard


Sets out in limit state design format the requirements for methods of design of timber elements of buildings and applies specifically to
sawn timber, glue laminated timber, natural round timber and construction plywood. Includes a section on design for fire resistance.
Amendments 1, 2 & 4 appended
Cited in BIA Approved Document B1/VM1/VM4
$149.95+GST (Members), $187.44+GST (Retail), 132 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1996 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2005 $39.95+GST (Members), $49.94+GST (Retail)

NZS 3604:1999 Timber Framed Buildings


Provides suitable methods and details for the design and construction of timber framed buildings up to three storeys high. This
standard is intended to apply to domestic dwellings, most residential and some commercial and other buildings, without the need for
specific engineering design.
Supplied as hole-punched pages together with a ring binder. Reprinted to incorporate Amendment 1 and 2
Cited in BIA Approved Document B1/AS1/AS2/AS3, B2/AS1, E1/AS1, E2/AS1/VM1 & G13/AS2
$209.95+GST (Members), $262.44+GST (Retail), 460 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $84.95+GST (Members), $106.19+GST (Retail)

NZS 3604:1999/NZS 4229:1999 Set Building bundle one


Includes the printed standards NZS 3604:1999 Timber framed buildings, and NZS 4229:1999 Concrete buildings not requiring
specific engineering design, available at a special price.
$309.95+GST (Members), $387.44+GST (Retail)

NZS 3604:1999 Timber Framed Buildings - CD-ROM version


Provides suitable methods and details for the design and construction of timber framed buildings up to three storeys high. This
standard is intended to apply to domestic dwellings, most residential and some commercial and other buildings, without the need for
specific engineering design. Includes downloadable CAD tables and hyper-links to enable quick navigation through the document.
Includes Amendments 1 and 2.
Also available for networks: details and price on request; Also available as a set with the printed version of NZS 3604:1999 at
$349.95+GST (Members) or $437.44+GST (Non-members).
$209.95+GST (Members), $262.44+GST (Retail), 460 pages

NZS 3604:1999 Set Timber Framed Buildings set comprising Hardcopy and CD-ROM
Provides suitable methods and details for the design and construction of timber framed buildings up to three storeys high. This
standard is intended to apply to domestic dwellings, most residential and some commercial and other buildings, without the need for
specific engineering design. Includes Hardcopy and CD-ROM versions of this Standard.
$349.95+GST (Members), $437.44+GST (Retail), 460 pages

AS/NZS 3604:1994 Information technology - Telecommunications and information exchange between systems
- Use of X.25 to provide the OSI connection-mode network service
Provides a mapping between the abstract primitives and parameters of the connection oriented network service and the real
elements of the X.25 packet layer protocol. This standard is identical to and reproduced from ISO/IEC 8878:1992.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 92 pages

NZS 3605:2001 Timber piles and poles for use in building


Sets performance criteria and provides a means of compliance for timber house piles references in NZS 3604 and for naturally round
timber piles and poles to meet design data assigned in NZS 3603.
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

NZS 3606:1987 (Superseded by AS/NZS 1328.1 & .2:1998)

NZS 3607:1989 Specification for round and part-round timber fence posts
Specifies a range of debarked, preservative treated, softwood, round, half round and quarter round line and strainer posts and
strainer stays and is intended to provide a reference acceptable to both users and producers, particularly in the preparation and
submission of tenders.
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

NZS/AS 3607-1989 Conductors - Bare overhead, aluminium and aluminium alloy - Steel reinforced
Specifies requirements and tests for composite electrical bare conductors, incorporating aluminium or aluminium alloy wires and
steel wires for overhead power transmission.
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 23 pages

NZS 3608:1975 (Superseded by AS/NZS 1859.1:1996 (in part) and AS/NZS 1859.2:1996 (in part))

NZS 3609:1978 Specification for timber ladders


Prescribes rules and establishes minimum requirements for portable timber ladders. Types of ladders comprise single and extension,
step and cleat. Provision is made for rungs, treads or cleats of either timber or metal and stiles of either one piece or laminated
timber. The care, use and maintenance of ladders is explained.
Approved electrical safety Standard; Superseded in part by AS/NZS 1892.5:2000, but remains current; Reprinted to append
Amendment 1:1984
$44.95+GST (Members), $56.19+GST (Retail), 59 pages
Amendment 1, 1984 $29.95+GST (Members), $37.44+GST (Retail)

NZS 3610:1979 Specification for profiles of mouldings and joinery


Establishes uniform profiles of mouldings and joinery.
$39.95+GST (Members), $49.94+GST (Retail), 22 pages

NZS 3611:1970 (Superseded by AS/NZS 2098 Parts 1 to 8:1996, AS/NZS 2271:1999 and AS/NZS 2269:1994)
NZS 3612:1970 (Superseded by AS/NZS 2098 Parts 1 to 8:1996, AS/NZS 2271:1999 and AS/NZS 2269:1994)

AS/NZS 3612:1994 Information technology - Data communication - 37-pole DTE/DCE interface connector and
contact number assignments
Specifies the 37-pole connector and the assignment of contact numbers at the interface between data terminal equipment and data
circuit-terminating equipment where CCITT recommendations V.24, V.10 and V.11 are applicable. This standard is identical to and
reproduced from ISO 4902:1989.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS 3613:1970 (Superseded by AS/NZS 2098.1 to .8:1996 and AS/NZS 2272:1996)

NZS 3614:1971 (Superseded by AS/NZS 2269:1994)

NZS 3616:1978 (Superseded by AS/NZS 1491:1995)

NZS 3617:1979 Specification for profiles of weatherboards, fascia boards, and flooring
Establishes the dressed dimensions and the moisture content at the time of machining for weatherboards, fascia boards, and strip
flooring.
Cited in BIA Approved Document E2/AS1
$39.95+GST (Members), $49.94+GST (Retail), 15 pages

NZS 3618:1984 Mechanical stress grading of timber


Sets out the requirements to be met by timber mechanically stress graded for bending strength and stiffness in compliance with this
Standard. Lists a range of standard stress grades and requires the grading machine to be capable of producing at least one of these.
Deals with the approval and verification of stress grading machines, and lays down quality assurance and control procedures which
shall be met before compliance with the Standard is claimed.
Superseded in part by AS/NZS 1748:1997 but remains Current
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 3618:1993 Information technology - Telecommunications and information exchange between systems
- Start-stop transmission signal quality at DTE/DCE interfaces
Specifies signal quality requirements for serial data transmission at the interface between start-stop transmission data terminal
equipment and data circuit-terminating equipment. This standard is identical to and reproduced from ISO/IEC 7480:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

NZS 3619:1979 Specification for timber windows


Specifies materials, construction, finishes, hardware, fastenings, installation and performance standards for timber windows and
doors. Also gives a range of preferred co-ordinating dimensions for windows based on a 200 mm multimodule.
$39.95+GST (Members), $49.94+GST (Retail), 15 pages

NZS 3620:1985 (Withdrawn)

NZS 3621:1987 (Superseded by AS/NZS 1148:2001)

AS/NZS 3621:2000 Information technology - Data communications - X.25 packet layer protocol for data
terminal equipment
Specifies the procedures, format and facilities at the packet layer for data terminal equipment operating in conformance with ITU-T
Recommendation X.25. This Standard is identical with and has been reproduced from ISO/IEC 8208:1995.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 170 pages
NZS 3622:2004 Verification of timber properties
This Standard describes procedures for the initial evaluation and daily quality control requirements necessary to ensure that timber
has the structural properties claimed for it. The procedures apply both to timber that is visually and machine stress graded.
Reprinted to incorporate Amendment 1:2005
$84.95+GST (Members), $106.19+GST (Retail), 18 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3624:1994 (Withdrawn)

AS/NZS 3629:- Methods of testing child restraints

3629.1:2004 Dynamic testing


Provides manufacturers and testing authorities with a method for testing a child restraint under various dynamic conditions, in order
to assess its performance under the requirements of AS/NZS 1754.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

3629.2:1995 Determination of hazardous throat contact in abnormal situations


Sets out the method for testing child restraints with an incorporated seat for possible hazardous throat contact through the child
restraint becoming loose or released. The test applies to Type B and Type D child restraints specified in AS/NZS 1754:1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

3629.3:1997 Dynamic testing of upper anchorage components


Sets the method of determining the dynamic performance of the upper anchorage components of child restraint systems by testing
the straps separately from other parts of the child restraint system.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3629.4:1997 Determination of the force required to adjust a harness


Sets out the method of determining the force required to adjust the harness of a child restraint to fit the child occupant.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3629.5:1995 Determination of quick-release device actuation force


Sets out the method for determining the force required to operate the button on the buckle of a child restraint and the fatigue effect
on the force required to operate the button.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

3629.6:1998 Determination of recline angle


Sets out a method of measuring the recline angle of a rearward-facing infant restraint.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS 3631:1988 New Zealand timber grading rules


Establishes visual grading rules for the selection of timber into quality classes. Four types of grades have been specified. Provision
has also been made for new crop radiata pine.
Cited in Timber Regulations 1948; BIA Approved Document B1/AS2
$44.95+GST (Members), $56.19+GST (Retail), 108 pages

NZS 3640:2003 Chemical preservation of round and sawn timber


This Standard sets out requirements for the preservative treatment and identification of timber to provide protection from decay and
insect attack including marine borers in all likely exposure conditions throughout New Zealand, based on six hazard classes that are
described in this Standard.
Reprinted to incorporate Amendments 1,2, 3 & 4
$84.95+GST (Members), $106.19+GST (Retail), 39 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007

NZMP 3640:1992 (Superseded by NZS 3640:2003)

NZS/AS 3643:- Computer graphics - Initial Graphics Exchange Specification (IGES) for digital exchange of
product definition data

3643.1-1989 General
Specifies information structures to be used for the digital representation and communication of product definition data. Use of this
Standard permits the compatible exchange of data of product definition data used by various computer-aided design and computer-
aided manufacturing (CAD/CAM) systems. It is identical with and has been reproduced from the US Department of Commerce
National Bureau of Standards Initial Graphics Exchange Specification (IGES) Version 4.0-1988.
Adopted Standard
$229.55+GST (Members), $286.94+GST (Retail), 516 pages

NZS/BS 3643: (Withdrawn)

AS/NZS 3646:- Information processing systems - Open Systems Interconnection - File transfer, access
and management

3646.1:1993 General introduction


Provides a general introduction to the concepts and mechanisms of file transfer, access and management (FTAM). FTAM defines a
file service and specifies a file protocol available within the application layer of the reference model. It is concerned with identifiable
bodies of information which can be treated as files and may be stored within open systems or passed between application
processes. This standard is identical to and reproduced from ISO 8571-1:1988.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 44 pages

3646.1, Supplement 1:1995 General introduction - overlapped access


Extends the service definition of FTAM to incorporate the services offered by overlapped access.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

3646.2:1993 Virtual filestore definition


Defines an abstract model of the virtual filestore for describing files and filestores; defines the set of actions available to manipulate
the elements of the model, defines the properties of individual files and associations in terms of attributes, and defines the form of
representations of files with hierarchical structures. This standard is identical to and reproduced from ISO 8571-2:1988.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 80 pages

3646.2, Supplement 1:1995 Virtual filestore definition - overlapped access


Extends the definitions of the abstract model of the virtual filestore to incorporate the concepts of overlapped access.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

3646.3:1993 File service definition


Defines in an abstract way the visible file transfer, access and management service within the OSI application layer in terms of the
primitive actions and events of the device, the parameter data associated with each primitive action and events of the device, the
parameter data associated with each primitive action and event and their inter-relationship. This standard is identical to and
reproduced from ISO 8571-3:1988.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 166 pages

3646.3, Supplement 1:1995 File service definition - overlapped access


Extends the file transfer access management service definition to include overlapped access. This standard is identical to and
reproduced from ISO 8571-3:1988.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 80 pages

3646.4:1993 File protocol specification


Defines the basic protocol which supports the internal file service, and the error recovery protocol which supports the external file
service. This standard is identical to and reproduced from ISO 8571-4:1988.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 212 pages

3646.4, Supplement 1:1995 File protocol specification - overlapped access


Extends the file protocol specifications to support the services offered by overlapped access. This standard is identical to and
reproduced from ISO 8571-4:1988.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 96 pages

3646.5:1994 Protocol implementation conformance statement proforma


Defines a protocol implementation conformance statement (PICS) proforma for the detailed expression of the conformance
requirements of AS 3646. This standard is identical to and reproduced from ISO/IEC 8571-5:1990.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

NZS/AS 3650:1988 (Withdrawn)

AS/NZS 3651:1994 Information processing systems - Telecommunications and information exchange between
systems - End system to intermediate system routing exchange protocol for use in
conjunction with the protocol for providing the connectionless-mode network service
Specifies a protocol which is used by network layer entities operating in end systems and intermediate systems to maintain routing
information. This standard is identical with and reproduced from ISO 9542:1988.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

AS/NZS 3652(Int):1998 (Expired Interim Standard)

AS/NZS 3654:1996 Information technology - Specification for a data descriptive file for information
interchange
Specifies a medium-independent and system-independent file and data record formats for the interchange of information. This
standard is identical with and reproduced from ISO/IEC 8211:1994.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 69 pages

AS/NZS 3661:- Slip resistance of pedestrian surfaces

3661.1:1993 (Superseded in part by AS/NZS 4586:1999, and in part by AS/NZS 4663:2002)

3661.2:1994 Guide to the reduction of slip hazards


Provides guidance on the selection, installation, care and maintenance of pedestrian surfaces in domestic, commercial and public
areas for the purpose of reducing slip hazards. It is not applicable to special industrial situations.
Cited in BIA Approved Document D1/AS1
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

AS/NZS 3662:2005 Performance of showers for bathing


Specifies the requirements for showers for bathing purposes.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2009
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2009 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3666:- Air-handling and water systems of buildings - Microbial control


3666.1:2002 Design, installation and commissioning
Specifies minimum requirements for the design, installation and commissioning of air-handling and water systems of buildings, other
than sole occupancy dwellings, for the purposes of microbial control. It does not include requirements for refrigerated room air-
conditioners and non-ducted split systems.
Cited in BIA Handbook/CS 9
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

3666.2:2002 Operation and maintenance


Specifies minimum requirements for the operation and maintenance of air-handling and water systems of buildings, other than sole
occupancy dwellings, for the purposes of microbial control. It does not include requirements for refrigerated room air-conditioners
and non-ducted split systems.
Cited in BIA Handbook/CS 9
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

3666.3:2000 Performance-based maintenance of cooling water systems


Outlines a performance-based approach to the maintenance of cooling water systems with respect to the control of microorganisms,
including Legionellae within such systems. This approach combines automatically regulated water treatment with monitoring,
assessment and control strategies to help create a low-risk environment within the cooling water system. This Standard provides a
performance-based alternative to the prescriptive requirements of AS/NZS 3666.2 for the maintenance of cooling water systems.
Cited in BIA Handbook/CS 9
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 3675:2002 Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including
19/33 (36) kV
Specifies the construction, dimensions and test requirements for water blocked covered conductors, suitable for overhead lines.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 31 pages

AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs


Specifies requirements for the production and supply of hot-rolled structural steel plates, floorplates and slabs for general structural
and engineering applications. It also specifies requirements for the production and supply of wide slabs as fully killed analysis-only
steel.
Reprinted to append Amendment 1:1999
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3679:- Structural steel

3679.1:1996 Hot-rolled bars and sections


Specifies requirements for the production and supply of hot-rolled structural steel bars and sections for general structural and
engineering applications.
Reprinted to incorporate Amendment 1:1997 and Amendment 2:2000
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2000 $29.95+GST (Members), $37.44+GST (Retail)

3679.2:1996 Welded I sections


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3682:1994 Information processing systems - Data communications - Protocol for providing
connectionless-mode network service
This protocol contains procedures for the connectionless transmission of data and control information from one network entity,
encoding of the protocol data units and the procedures for the correct interpretation of protocol control information. This standard is
identical with and reproduced from ISO 8473:1988.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 56 pages

AS/NZS 3687:1993 (Withdrawn)

AS/NZS 3692:1993 Information Technology - Open Systems Interconnection - Systems management overview
Provides an overview to the family of systems management Standards. These Standards are partitioned into groups with the scope
and principal components of each group specified. This standard is identical with and reproduced from ISO/IEC 10040:1992.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages

AS/NZS 3696 Wheelchairs

AS/NZS 3696.1:2008 Determination of static stability


Specifies the test methods for determining the static tipping stability of wheelchairs, including scooters. Identical to ISO 7176-
1:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 3696.2:2008 Determination of dynamic stability of electric wheelchairs


Provides a method for determining the dynamic stability of electrically powered wheelchairs, for the use of manufacturers, testing
authorities and purchasers. Identical to ISO 7176-2:2001.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 3696.3:2008 Determination of effectiveness of brakes


Provides a suitable test for the determination of the effectiveness of brakes on manual and electrically powered wheelchairs.
Identical to ISO 7176-3:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 3696.8:1998 Requirements and test methods for static, impact and fatigue strengths
Specifies strength requirements for wheelchairs including scooters intended for users whose mass does not exceed 100 kg. This
Standard is technically equivalent to and has been reproduced from ISO/FDIS 7176-8:1997.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 57 pages

AS/NZS 3696.9:2008 Climatic tests for electric wheelchairs


Provides a suitable test for the determination of the effects of various climatic conditions on electrically powered wheelchairs.
Adopted from ISO 7176-9:2001, with national modifications.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 3696.14:1998 Power and control systems for electric wheelchairs - Requirements and test methods
Specifies requirements and test methods for power and control systems of electric wheelchairs (including scooters). Includes
vehicles with built-in battery chargers. This Standard is based on but not equivalent to and has been reproduced from ISO 7176-
14:1997.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

AS/NZS 3696.21:2008 Requirements and test methods for electromagnetic compatibility of electrically powered
wheelchairs and motorized scooters
Provides a suitable test methods for the determination of electromagnetic compatibility of electrically powered and manual scooters
with an added power kit. Identical to ISO 7176-21:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 3696.22:2008 Set-up procedures


Provides suitable set-up procedures for wheelchairs prior to testing. Identical to ISO 7176-22:2000.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 3696.23:2008 Requirements and test methods for attendant-operated stair-climbing devices
Provides a requirement for stair-climbing devices and stair-climbing wheelchair carriers operated by an attendant. Identical to ISO
7176-23:2002.
Joint Australian/New Zealand Standard
$89.95+GST (Members), $112.44+GST (Retail), 48 pages

AS/NZS 3696.24:2008 Requirements and test methods for user-operated stair-climbing devices
Establishes a means of qualifying and quantifying the performance of user-operated stair-climbing devices under the various
conditions and environments encountered in their operation. Identical to ISO 7176-24:2004.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 96 pages

AS/NZS 3697:1994 Information technology - Open Systems Interconnection - Job transfer and manipulation
concepts and services
Defines the concepts and services for job transfer and manipulation in the form of work to be done on one or more open systems,
and provides the means to monitor the execution of work previously specified and modified as required. This standard is identical
with and reproduced from ISO/IEC 8831:1992.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 111 pages

AS/NZS 3698:1994 Information technology - Open Systems Interconnection - Specification of the basic class
and full protocol for job transfer and manipulation
Specifies the application-context name to be used to reference the procedures used in this Standard in application-context
negotiation, the abstract syntax name to be used to reference the abstract syntax of a job transfer and manipulation (JTM) transfer
element, commitment, concurrency and recovery user data and JTM defined. This standard is identical with and reproduced from
ISO/IEC 8832:1992.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 157 pages

BS 3700:1988 Recommendations for preparing indexes to books, periodicals and other documents
Content, organization and presentation of indexes. Basic indexing principles and practice.
$193.94+GST (Members), $242.43+GST (Retail), 20 pages

AS/NZS 3701:1993 (Withdrawn)

NZS/BS 3704:1989 (Superseded by NZS 7104)

AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings
Provides the method for determining the pressure cycling resistance properties of pipes, joints and fittings for pressure applications.
Assesses the ability of a pipe or fitting system to perform in an environment that involves cyclical loading.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 3711:- Freight containers

3711.1:1993 (Withdrawn)

3711.2:1993 Terminology
Defines terms relating to freight containers, including types, characteristics, components and structures.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)
3711.3:1993 Corner fittings
Specifies the basic dimensions and the functional and strength requirements of corner fittings for Series 1 and Series R freight
containers.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

3711.4:1993 General purpose containers


Specifies the basic requirements for the specification and testing of Series 1 and Series R freight containers of the totally enclosed
general purpose types (closed, vented, ventilated or open top), which are suitable for international exchange and for conveyance by
road, rail and sea, including interchange between these forms of transport.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

3711.5:1993 (Withdrawn)

3711.6:1993 (Withdrawn)

3711.7:1993 Dry bulk containers


Specifies the basic requirements for the specification and testing of Series 1 and Series R dry bulk containers of the non-pressurized
type, which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these
forms of transport.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 33 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

3711.8:1993 (Withdrawn)

3711.9:1993 (Withdrawn)

3711.10:1993 (Withdrawn)

AS/NZS 3718:2005 Water supply - Tap ware


Specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, time/flow taps, mixing taps mechanical
(non-thermostatic), and tap sets in a range of nominal sizes from DN 6 to DN 50 generally for continuous operating temperatures not
exceeding 80 degrees C. Products designed for other temperature ranges are included where tested to the appropriate temperature
criteria. It incorporates the testing requirements for the determination of flow rates required by the Water Efficient Labelling and
Standards Scheme (WELS). The Standard also specifies additional requirements for outlets that are an integral part of a tap or
mixing tap and the requirements for tapset breaching piece assemblies.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2008
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 80 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3725:2007 Design for installation of buried concrete pipes


Specifies methods, and provides data, for calculating the vertical working loads on buried concrete pipes due to the materials
covering the pipes and superimposed loads. Also specifies methods for relating the minimum proof test load to the calculated vertical
working loads on concrete pipes installed under particular conditions, including that of combined vertical load plus internal pressure.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 48 pages

AS/NZS 3725, Supplement 1:2007 Design for installation of buried concrete pipes – Commentary
Gives additional guidance and commentary to AS/NZS 3725:2007. The Standard provides an agreed basis for determining the
vertical working loads on installed steel-reinforced, fibre-reinforced and unreinforced concrete pipes and a range of installation
conditions.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 52 pages

AS/NZS 3733:1995 Textile floor coverings - Cleaning and maintenance of residential and commercial carpeting
Provides requirements for various cleaning techniques and recommendations for the establishment of maintenance programs for
carpets in residential and commercial situations to achieve maximum appearance retention and wear life, and to minimize possible
hazards to health from poorly maintained carpets. Also provides requirements for cleaning chemicals to cover their known effects on
new generation carpets, requirements for vacuum cleaner filtration, and recommendations for disposal of extracted cleaning wastes.
Includes a useful guide to stain removal.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 39 pages

AS/NZS 3744:- Furniture - Assessment of the ignitability of upholstered furniture

3744.1:1998 Ignition source - Smouldering cigarette


This Standard is technically equivalent to and has been reproduced from ISO 8191.1:1987.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

3744.2:1998 Ignition source - Match-flame equivalent


This Standard is technically equivalent to and has been reproduced from ISO 8191.2:1988.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

3744.3:1998 Ignition sources - Nominal 160 mL/min gas flame and nominal 350 mL/min gas flame
Sets out the method to be employed in assessing the ignitability of actual combinations of upholstered seating materials when
subjected to gas flaming ignition sources.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS/AS 3747:1989 (Withdrawn)

AS/NZS 3749:- Intruder alarm systems - Road vehicles

3749.1:2003 Performance requirements


Specifies the requirements and test methods for vehicle security alarm systems intended as original equipment and for post-delivery
installation in vehicles intended for the carriage of passengers. It includes sections on general requirements, test requirements,
product information and marking, and equipment variations. Appendices are provided for the requirements of sound level test for
sounding devices and detection range test for ultrasonic movement detectors.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 30 pages

3749.2:1997 Installation and maintenance


Sets out the requirements for the installation and maintenance of car alarm systems designed in accordance with Part 1 of the
Standard to ensure that the alarm system performs to the manufacturer`s specification and false alarms do not occur. There are
sections on installation and commissioning, and appendices on maintenance and the functional tests which should be carried out on
the detection device.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

AS/NZS 3750:- Paints for steel structures

3750.0:2008 Introduction and list of Standards


Provides a list of Standards in the AS/NZS 3750 Series.
Joint Australian/New Zealand Standard
$29.95+GST (Members), $37.44+GST (Retail), 8 pages

3750.1:2008 Epoxy mastic (two-pack) - For rusted steel


Specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior
atmospheric corrosion in a severe industrial or coastal marine environment.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

3750.2:2008 Ultra high-build paint


Specifies requirements for two-component ultra high-build paints for the protection of iron and steel against exterior corrosion in
aggressive service conditions.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 24 pages

3750.3:2008 Heat resisting - Exterior


Specifies requirements for single- and multi-component primers and finishing coats for the protection of steel against atmospheric
corrosion at elevated temperatures.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 20 pages

3750.4:1994 Bitumen paint


Provides requirements for single component bitumen paints intended for the short-term protection of iron and steel against
atmospheric corrosion.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

3750.5:2008 Acrylic full gloss (two-pack)


Specifies requirements for a two-component, solvent-borne full gloss acrylic paint intended to be used for the protection of iron and
steel against exterior atmospheric corrosion.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 24 pages

3750.6:1995 Full gloss polyurethane (two-pack)


Provides requirements for two-component solvent-borne full gloss polyurethane paints intended for use in the protection of iron and
steel against external atmospheric corrosion. Includes high-build coatings.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

3750.7:1994 Aluminium paint


Provides requirements for aluminium coloured finishing paints that are intended to protect iron and steel against atmospheric
corrosion.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

3750.8:1994 Vinyl paints - Primer, high-build and gloss


Provides requirements for vinyl paints used as primers, intermediate coats and finishing coats intended for the exterior protection of
iron and steel against atmospheric corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

3750.9:1994 Organic zinc-rich primer


Provides requirements for organic zinc-rich priming paint intended for use on iron and steel to provide protection against atmospheric
corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

3750.10:1994 Full gloss epoxy (two-pack)


Provides requirements for full gloss epoxy paint intended for the protection of iron and steel structures against exterior corrosion in a
severe industrial or marine environment.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

3750.11:1996 Chlorinated rubber - High-build and gloss


Specifies requirements for high-build and gloss chlorinated rubber paints intended to protect iron and steel against atmospheric
corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

3750.12:1996 Alkyd/micaceous iron oxide


Provides requirements for alkyd/micaceous iron oxide paint intended to protect iron and steel against atmospheric corrosion.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

3750.13:1997 Epoxy primer (two pack)


Provides requirements for two-component epoxy primers for the protection of iron and steel and galvanized iron and steel against
atmospheric corrosion in an industrial or marine environment.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

3750.14:1997 High-build epoxy (two-pack)


Provides requirements for a two-component, high-build epoxy paint intended to be used for the protection of iron and steel against
exterior atmospheric corrosion.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

3750.15:1998 Inorganic zinc silicate paint


Specifies requirements for inorganic zinc silicate paint for use in the protection of iron and steel against exterior atmospheric
corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

3750.16:1998 Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed
steel
Specifies requirements for waterborne primers and paints intended to be used on primed or unprimed galvanized steel,
zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior industrial or marine applications when applied by brush, roller
or spraying.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

3750.17:1998 Etch primers (single pack and two-pack)


Specifies requirements for single pack etch primers (Type 1) and two-pack etch primers (Type 2) intended for pretreating metal
surfaces to improve the adhesion of paint systems applied to them.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

3750.19:2008 Metal primer - General purpose


Specifies requirements for single-component, general purpose priming paints as part of a system for the protection of iron and steel
against atmospheric corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

3750.20:2008 Anticorrosive metal primer - Solvent-borne - Lead and chromate free


Specifies requirements for solvent-borne pigmented metal priming paints as part of a system for the protection of iron and steel
against atmospheric corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

3750.21:2008 Undercoat - Solvent-borne


Specifies requirements for solvent-borne undercoat paints as part of a system for the protection of iron and steel against atmospheric
corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

3750.22:2008 Full gloss enamel - Solvent-borne


Specifies requirements for full gloss enamel, solvent-borne paints as part of a system for the protection of iron and steel against
atmospheric corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

3750.23:2008 Semi-gloss enamel - Solvent-borne


Specifies requirements for solvent-borne semi-gloss enamel paints as part of a system for the protection of iron and steel against
atmospheric corrosion.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
AS/NZS 3752:2006 Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld
metal
Specifies the sampling and analytical procedure for the determination of diffusible and residual hydrogen in ferritic weld metal arising
from the welding of ferritic steel using arc welding processes with filler metal.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment


Specifies the procedures and criteria for the in-service safety inspection and testing of electrical equipment which is designed for
connection by flexible cord. It also applies to cord extension sets, portable outlet devices, portable residual current devices and
portable isolation transformers. Appendices include detailed test methods. It does not cover type approval tests for the design and
construction of the equipment, nor does it include any procedural rules for the safe use of equipment.
Reprinted to append Amendment 1:2005
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 42 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZS/AS 3766-1990 Mechanical fittings for low voltage aerial bundled cable
Specifies performance and general requirements for fittings designed specifically for use with the insulated aerial cables,
manufactured to AS 3560, Electric cables - Aerial bundled - voltages up to and including 0.6/kV.
Adopted Standard
$89.20+GST (Members), $111.50+GST (Retail), 21 pages

NZS/ISO 3767: (Withdrawn)

AS/NZS 3770:1993 Guide to the safe use of infusion pumps and controllers
Provides advice on the safe use of infusion pumps, infusion controllers, syringe pumps and pumps for ambulatory use in hospitals
and health care facilities.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 3785:- Underground mining - Shaft equipment

3785.4:2002 Conveyances for vertical shafts


Specifies requirements for conveyances used in vertical-shaft mine-winding installations, including fixtures on the conveyance, but
not suspension pins for connecting head rope, tail rope attachments or gripper assemblies. Information that should be provided by
the purchaser and supplier are given in appendices.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

AS/NZS 3788:2006 Pressure equipment - In-service inspection


Aligns the Standard with current equipment integrity management and assessment practices and addresses some of the problems
currently experienced in industry.
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 204 pages

NZS/AS 3792.1-1990 (Withdrawn)

AS/NZS3800:2005 Electrical equipment for explosive atmospheres - Repair and overhaul


Sets out requirements for repair and overhaul of electrical equipment used in hazardous areas, which are defined in AS/NZS
60079.10 for gases and AS/NZS 61241.10 for dusts. It covers equipment having a group designation of Group I for coal mining and
Group II for all other industries where flammable gases and vapours may be present. It covers all types of explosion-protection
techniques and specifies requirements for repair and overhaul service facilities.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 112 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3801:1995 (Withdrawn)

NZMP 3801:1972 (Withdrawn)

AS/NZS 3802:1997 Data elements and interchange formats - Information interchange - Representation of dates
and times
Specifies the representation of dates in the Gregorian calendar and times and representations of periods of time. This Standard does
not assign any particular meaning or interpretation to any data element that uses representations in accordance with this Standard.
Such meaning will be determined by the context of the application. This Standard does not cover dates and times where words are
used in the representation. This standard is technically identical with and reproduced from ISO 8601:1988 including Corrigendum
1:1991.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

AS/NZS 3808:2000 Insulating and sheathing materials for electric cables


Specifies the tests and criteria, referenced in particular Standards, for elastomeric, PVC, reduced fire hazard and polyolefin
insulating and sheathing materials used in the construction of electric cables and flexible cords. It does not cover tests that can only
be conducted on completed cables.
Reprinted to append Amendment 2:2004
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3809:1998 Safes and strongrooms


Specifies performance requirements and procedures for testing secure storage units of the type intended for use in commercial,
industrial, mercantile, financial and insurance institutions, and the like, and that are relied upon to protect the contents from intrusion
and forced removal. The secure storage units include free-standing safes, built-in safes (floor and wall), strongroom doors and
strongrooms (with or without a door). This Standard excludes electronic packages (other than electronic locks) and other devices
that may be attached to the secure storage unit or vault. These requirements are intended to establish the resistance to forced
removal and intrusion resistant rating of secure storage units according to attack by prescribed tools. This Standard does not cover
tests for fire resistance.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

AS/NZS 3810:- Safes and strongrooms - Methods of test

3810.0:1998 Introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

3810.1:1998 Test for physical attack


Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

3810.2:1998 Test for anchoring strength


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

3810.3:1998 Test for explosive resistance


Specifies the method to be applied when testing secure storage units for explosive designation (EX). This is an optional test.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 3813:1998 Plastic monobloc chairs


Specifies strength, durability and stability as well as marking requirements for plastic monobloc chairs. This Standard was developed
by the Plastics and Chemicals Industry Association in conjunction with the now Australasian Furnishing Research and Development
Institute.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

AS/NZS 3816:1998 (Superseded by NZS 4304:2002)

AS/NZS 3817:1998 Acoustics - Methods for the description and physical measurement of single impulses or
series of impulses
Describes preferred methods for the description and the physical measurement of single impulsive sounds or short series of
impulsive sounds and for the presentation of the data. It does not provide methods for interpreting the potential effects of series of
impulses of noise on hearing, community response or structures. This Standard is identical with and has been reproduced from ISO
10843:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

AS/NZS 3820:1998 Essential safety requirements for low voltage electrical equipment
Specifies a set of outcomes-oriented criteria for the safety of electrical equipment for use by electrical regulators in relation to
products for which regulatory approval before sale is not required (non-declared articles). This Standard is intended to be consistent
with the criteria of the European Union Low Voltage Directive.
Reprinted to incorporate Amendment 1:2004
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3821:1998 Cassettes for medical X-ray diagnosis - Radiographic cassettes and mammographic
cassettes
Specifies dimensions for the commonly used range of cassettes for radiographic and mammographic procedures. This Standard is
identical with and has been reproduced from IEC 60406:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

AS/NZS 3823:- Performance of electrical appliances - Airconditioners and heat pumps

3823.1:- Test methods

3823.1.1:1998 Non-ducted airconditioners and heat pumps - Testing and rating for performance
Specifies the testing Standards for room airconditioners. This Standard is technically equivalent to and has been reproduced from
ISO 5151:1994.
Reprinted to incorporate Amendments 1, 2 & 3
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 46 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)

3823.1.2:2001 Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance
Specifies the conditions on which the capacity and energy consumption of factory-made residential, commercial and industrial,
electrically driven, mechanical-compression, single-package and split-system, ducted airconditioners employing air- and water-
cooled condensers and ducted heat pumps employing air-cooled condensers are based. The Standard also specifies the test
methods to be applied for determining the capacity and efficiency ratings. It covers equipment utilizing one or more refrigeration
systems, one outdoor unit and one or more indoor units controlled by a single thermostat/controller, as well as equipment utilizing
single, multiple and variable capacity components. This Standard is an adoption, with national modifications, of ISO 13253:1995.
Reprinted to incorporate Amendments 1 to 4
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 49 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2008 $29.95+GST (Members), $37.44+GST (Retail)

3823.1.3:2005 Water-source heat pumps - Water-to-air and brine-to-air heat Pumps - Testing and rating of
performance
Establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven,
mechanical-compression type, water-to-air and brine-to-air heat pumps.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

3823.2:2005 Energy labelling and minimum energy performance standard (MEPS) requirements
Specifies the energy labelling requirements for single-phase non-ducted airconditioners of the vapour compression type for
household use, and the minimum energy performance standard (MEPS) requirements for single-phase and three-phase
airconditioners of the vapour compression type up to a rated cooling capacity of 65 kW and which fall within the scope of AS/NZS
3823.1.1 or AS/NZS 3823.1.2 or AS/NZS 3823.1.3.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2008 $29.95+GST (Members), $37.44+GST (Retail)

3823.3:2002 Calculation of performance for minimum energy performance standard (MEPS)


requirements
Specifies procedures for calculating the performance of factory-made residential, commercial and industrial, electrically driven,
mechanical compression, single-package and split-system, ducted and non-ducted airconditioners for determining their compliance
with minimum energy performance standard (MEPS) requirements specified in AS/NZS 3823.2.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

AS/NZS 3824:1998 Guidelines for radiotherapy treatment rooms design


Applies to those aspects of a radiotherapy installation which ensure the safety of the patient, the equipment operator and other
persons present during the period in which the equipment is in use. General construction requirements are not addressed. This
Standard is identical with and has been reproduced from IEC 61859:1997.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

AS/NZS 3825:1998 Procedures and devices for the removal and disposal of scalpel blades from scalpel
handles
Sets out performance characteristics of devices used in, and procedures for, the removal and disposal of scalpel blades and similar
instruments from scalpel handles.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 3827:- Lighting system performance - Accuracies and tolerances

3827.1:1998 Overview and general recommendations


Identifies the factors that influence variability in lighting performance and gives recommendations on how such variability may be
contained within tolerable limits in the specification, calculation and measurement of interior and exterior lighting systems. Provides
advice on the comparison of calculated/measured values of lighting parameters with specified or target values, taking into account
the uncertainties of calculation/measurement. Sets out typical uncertainties that might be expected for various elements of lighting
calculations/measurements, together with total uncertainties for the overall design.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 49 pages

3827.2:1998 Compliance requirements


Sets out requirements applying to verification of compliance of calculated or measured values of lighting parameters, from interior
and exterior lighting systems, with specified or target values for these parameters. The requirements are the minimum considered
necessary to ensure that calculated or measured values of lighting parameters are of an acceptable accuracy.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 3829:1998 Wool - IWTO Staple Test Regulations


Sets out IWTO regulations relating to sampling and testing staples of greasy wool for the terms of IWTO Staple Test Certificate and
IWTO Combined Staple Test Certificates. This Standard is identical with and has been reproduced from the IWTO Staple Test
Regulations.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3831:1998 Waste management - Glossary of terms


Specifies definitions for commonly used waste terms such as those involving collection, sorting, disposal, recycling, waste stream,
waste management and waste minimization. The definitions are aimed at generic waste rather than specific product groups, in order
to be suitable to various industries and institutions as well as households. For terms specific to clinical or paper waste, refer to the
relevant Standards. Terms more generally related to the environment are not included.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 3832:1998 Electrical installations - Cold-cathode illumination systems


Sets out requirements for the construction, testing and methods of installation of cold-cathode illumination systems (neon signs) to
ensure safety from fire and electrical shock. It includes requirements for electrical components and wiring and covers
recommendations for maintenance and repair.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages

AS/NZS 3833:2007 The storage and handling of mixed classes of dangerous goods, in packages and
intermediate bulk containers
Provides minimum acceptable safety requirements for installations where more than one class of dangerous goods is stored and
handled, whether in packages or intermediate bulk containers (IBCs) of up to 1.6 m3 capacity.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 88 pages

AS/NZS ISO 3834 Quality requirements for fusion welding of metallic materials

AS/NZS ISO 3834.1:2008 Criteria for the selection of the appropriate level of quality requirements
Provides a general outline of AS/NZS ISO 3834 and criteria to be taken into account for the selection of the appropriate level of
quality requirements for fusion welding of metallic materials, among the three levels specified in AS/NZS ISO 3834 Parts 2, 3 and 4.
It applies to manufacturing, both in workshops and at field installation sites. Identical to ISO 3834-1, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

AS/NZS ISO 3834.2:2008 Comprehensive quality requirements


Defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
Identical to ISO 3834-2, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS ISO 3834.3:2008 Standard quality requirements


Defines standard quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
Identical to ISO 3834-3, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS ISO 3834.4:2008 Elementary quality requirements


Defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
Identical to ISO 3834-4, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

AS/NZS ISO 3834.5:2008 Documents with which it is necessary to conform to claim conformity to the quality
requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
Specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834-2,
AS/NZS ISO 3834-3 or AS/NZS ISO 3834-4. It can only be used in conjunction with AS/NZS ISO 3834-2, AS/NZS ISO 3834-3 or
AS/NZS ISO 3834-4. Identical to ISO 3834-5, Ed. 1.0 (2005).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 3835 Earth potential rise - Protection of telecommunications network users, personnel and plant

3835.1:2006 Code of practice


Specifies requirements and code of practice to minimize hazards due to earth potential rise for the protection of telecommunications
network users, personnel and plant.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

3835.2:2006 Application guide


Specifies recommendation and code of practice for the application of the EPR Code of practice for the protection of persons or plant
prescribed in AS/NZS 3835.1.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an
oxygen consumption calorimeter
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and
smoke release of materials and products when exposed to controlled levels of radiant heating.
Cited in BIA Approved Document C/AS1
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

AS/NZS 3838:2006 Helmets for horse riding and horse related activities
Specifies requirements for protective helmets for horse riding and horse-related activities, intended to mitigate the effects of an
impact to the head. It includes construction, testing and labelling requirements. A helmet complying with this Standard may
incorporate special features designed to suit its use in specific horse-related activities.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 20 pages

AS/NZS 3841:1998 Guide 61: Requirements for assessment and accreditation of certification/registration
bodies
Provides general requirements for bodies operating accreditation systems, intended to promote equivalence of national systems and
facilitate mutual recognition between such bodies which are concerned with the recognition of competence. This Standard is
identical with and has been reproduced from ISO/IEC Guide 61:1996 (also published as Handbook SAA/SNZ HB18.61:1996).
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 3842:1998 Guide 62: General requirements for bodies operating assessment and
certification/registration of quality systems
Provides requirements which are intended to ensure that certification bodies operate third-party certification/registration systems in a
consistent and reliable manner, thereby facilitating their acceptance on a national and international basis. This Standard is identical
with and has been reproduced from ISO/IEC Guide 62:1996 (also published as Handbook SAA/SNZ HB18.62:1996).
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 3843:1998 Guide 65: General requirements for bodies operating product certification systems
Provides general requirements for bodies operating a system for third-party product certification (which may include a process or
service) as a means of assurance that the system complies with specified Standards and other normative documents. This Standard
is identical with and has been reproduced from ISO/IEC Guide 65:1996. (Also published as Handbook SAA/SNZ HB18.65:1998.)
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 3845:1999 Road safety barrier systems


Sets out requirements for roadside devices that provide some degree of redirection and containment capability when impacted by a
vehicle, or provide controlled absorption of the kinetic energy of a vehicle that is on a collision course. The Standard also provides
users with issues when specifying the installation, erection, maintenance and test methods for these devices to achieve an
acceptable level of performance.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 118 pages

AS/NZS 3847:- Shopping trolleys

3847.1:1999 For general use


Specifies materials, construction, performance and testing requirements for shopping trolleys.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 3849:1999 Wool - IWTO Condition Testing Regulations for Wool Tops
Sets out the IWTO regulations relating to the sampling and condition testing of wool tops and the issue of IWTO conditioning
certificates for such wools.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 3856:- Hoists and ramps for people with disabilities - Vehicle-mounted

3856.1:1998 Product requirements


Specifies design and performance requirements for appliances which incorporate a platform, ramp, sling, seat or harness, for use by
people with disabilities in boarding and alighting from motor vehicles. Covers only those appliances that are attached to a vehicle.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

3856.2:1998 Installation requirements


Specifies installation requirements in vehicles for the types of hoists and ramps covered in Part 1.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

NZS/ISO 3862:1991 (Withdrawn)

AS/NZS 3862:2002 External fusion-bonded epoxy coating for steel pipes


Provides purchasers and manufacturers of steel pipes with a specification for external fusion-bonded epoxy coating of steel pipes for
protection against corrosion.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 58 pages

AS/NZS 3863:2002 Galvanized mild steel wire for armouring of cables


Specifies requirements for galvanized cold-drawn mild steel wire of round cross-section used for the armouring of electric and
telecommunication cables.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and construction
Specifies requirements for the construction of solid fuel burning heaters and related domestic appliances. Requirements include
design, performance and construction materials. Also included are requirements for appliances utilizing catalytic combustors and
those used for water heating purposes. This Standard does not cover the requirements for installation nor does it address the power
output, efficiency, or the level of pollutant flue gas emissions which are covered by other Standards.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 27 pages

NZS/ISO 3874:1988 (Superseded by AS/NZS 3711.10)

AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and
fittings
Provides a standard specification for use by manufacturers and purchasers of solvent cements and priming fluids.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

AS/NZS 3889:1993 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear
strength and adhesion strength
Specifies three methods of calculating, after test, the tear strength and adhesion strength of vulcanized rubber or fabrics coated with,
or adhered to, rubber or plastics. This standard is identical with and reproduced from ISO 6133:1981.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 3894:- (Withdrawn)

AS/NZS 3896:2008 Waters - Examination for Legionella spp. including Legionella pneumophila
Sets out a method for isolating and estimating the number of Legionella pneumophila and a range of other Legionella spp. in water.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 3901:1974 (Superseded by NZS 3902:2004)

NZS 3902:2004 Housing, alterations and small buildings contract


Provides a form of building contract agreement suitable for owners who are making their own building arrangements. It is intended
to be a fair and clearly understood contract that sets out all parties rights and responsibilities. This is a revision of NZS 3901:1974
and NZS 3902:1974.
Each party to the contract must purchase a copy of this standard.
$49.95+GST (Members), $62.44+GST (Retail), 54 pages

AS/NZS 3905:- Quality system guidelines

3905.2:1997 (Withdrawn - use SAA HB90.3-2000)

3905.3:1994 Guide for the hospitality industry


Provides guidelines for the implementation of quality systems and quality improvement programs in hospitality industries such as
hotels, motels, clubs, restaurants and caterers, based on the requirements of AS 3901/NZS 9001/ISO 9001. Developed jointly by
Standards Australia/Standards New Zealand and Tourism Training Australia, it provides links to training programs in the hospitality
industry and the `Excellence in Hospitality` program.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 42 pages

3905.4:1995 Guide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994 for
the pressure equipment industry
Provides guidance to the pressure equipment industry on the application of quality system Standards AS/NZS ISO 9001:1994 and
AS/NZS ISO 9002:1994. The application of each requirement is explained in terms understood in the industry. Typical examples are
included to assist in understanding the requirements.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages
3905.5:1995 (Withdrawn)

3905.6:1995 (Withdrawn)

3905.7:1995 Guide to AS/NZS ISO 9001:1994 for the road freight transport industry
This Standard provides guidance for the road freight transport industry on the application of quality system Standard AS/NZS ISO
9001:1994. The application of various quality system elements is described in terms understood in the industry and typical examples
are included.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 57 pages

3905.8:1996 (Withdrawn)

3905.12:1999 Guide to AS/NZS ISO 9001:1994 for architectural and engineering design practices
Provides guidance on the application of AS/NZS ISO 9001 to architectural and engineering design practices, and similar designers
and consultants practising in the construction industry. It includes guidance on the development of effective quality systems for use
within a practice.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 64 pages

3905.13:1998 (Withdrawn - use SAA HB90.4-2000)

3905.14:1998 (Withdrawn)

3905.16:1998 Guidelines to quality in project management


Provides guidance on the application of quality management principles and practices, as described in the ISO 9000 family of
Standards, and the process for achievement of quality in project management. It is applicable to projects of varying complexity, small
or large. It is not intended as a guide to project management itself but, if considered in conjunction with AS/NZS ISO 9001, it
supplements the guidance given in AS/NZS ISO 9000.4. This Standard is identical with, and has been reproduced from, ISO
10006:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

AS/NZS 3906:1994 (Withdrawn)

AS/NZS 3907:1996 Quality management - Guidelines for configuration management


Provides guidelines for configuration management which can be applied to provide identification and control of characteristics over
the life cycle of a product or project. This standard is identical with ISO 10007:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

NZS 3910:2003 Conditions of contract for building and civil engineering construction
Provides a standard form of general conditions of contract written in plain English for incorporation into construction contract
documents. Usually with this contract form the Contractor constructs the works in accordance with the design provided by the
Engineer, however, it may also be suitable for contract works for which the Contractor, wholly or partly, has design responsibility.
Also includes conditions of tender and forms for special conditions, contract agreement and bonds for contractors and principals.
Sets out the contractual relationship between a client and the Contractor and defines their rights, obligations and communications.
Insurance forms are included for the purpose of providing outlines of the insurance cover that is provided for a contract. A range of
disputes resolution procedures are provided. Payment processes are prescribed that comply with the Construction Contracts Act
2002. Includes on a CD ROM copies of the forms and schedules that may be completed with project specific details and a read-only,
searchable and hyperlinked copy of the standard.
Each party to the contract must purchase a copy of this standard.
$54.95+GST (Members), $68.69+GST (Retail), 111 pages

NZMP 3911:1992 (Superseded by NZS 3910:1998)


NZS/ISO 3912:1977 (Withdrawn)

NZMP 3912:1992 (Superseded by NZS 3910:1998)

AS/NZS 3913:1992 (Withdrawn)

NZMP 3914:1994 (Superseded by NZS 3910:1998)

NZS 3915:2005 Conditions of contract for building and civil engineering construction (where no person is
appointed to act as engineer to the contract)
Provides a New Zealand standard contract form in plain English, for incorporation in building and construction contract documents, in
situations where the client (Principal) administers the contract directly. Also includes conditions of tender and forms for special
conditions, contract agreement and bonds for contractors and principals. Provides a range of disputes resolution procedures. The
intent and content of this Standard has been aligned with NZS 3910:2003 and the provisions to the Construction Contracts Act 2002.
Each party to the contract must purchase a copy of this standard.
$59.95+GST (Members), $74.94+GST (Retail), 120 pages

AS/NZS 3931:1998 Risk analysis of technological systems - Application guide


Explains risk analysis and hazard identification within the general context of risk management; provides a basic model for analysis of
risk, and for planning and presentation; and provides explanations of the processes and guidance on several of the analytical
techniques involved. This Standard is identical with and has been reproduced from IEC 60300-3-9:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

BS 3938:1973 (Withdrawn)

BS 3941:1975 (Withdrawn)

AS/NZS 3944:1993 Shewhart control charts


Provides a guide to the use and understanding of the Shewhart system of control charts as one method for statistical control of a
process. This standard is identical with ISO 8258:1991.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

AS/NZS 3947:- Low-voltage switchgear and controlgear

3947.1:2001 (Withdrawn)

3947.2:2002 (Withdrawn)

3947.3:2001 Switches, disconnectors, switch-disconnectors and fuse-combination units


Applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor
circuits of which the rated voltage does not exceed 1000 V a.c. or 1500 V d.c. Specifies characteristics of equipment, conditions with
which the equipment shall comply with reference to operation and behaviour in normal service and specified abnormal conditions
and dielectric properties, tests for confirming that these conditions have been met and the methods to be adopted for these tests and
the information to be marked on the equipment or supplied by the manufacturer. This Standard is identical to and reproduced from
IEC 60947-3:1999 and includes variations made to this document by its Corrigendum:1999/07 and Amendment 1:2001.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 47 pages

3947.3, Supplement 1:2001 Switches, disconnectors, switch-disconnectors and fuse-combination units - Fuse-switch-
disconnectors and switch-disconnectors for use with low-voltage aerial bundled cables
(Supplement to AS/NZS 3947.3:2001)
Specifies requirements for fuse-switch-disconnectors and switch-disconnectors for use with low-voltage aerial bundled cable
systems in distribution circuits with a rated voltage of 400 V a.c. line to line. It is closely aligned with the requirements of AS/NZS
3947.1 and based on AS/NZS 3947.3.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

3947.4:- Contactors and motor-starters

3947.4.1:2001 (Withdrawn)

3947.4.2:2000 (Withdrawn)

3947.4.3:2000 A.C. semiconductor controllers and contactors for non-motor loads


Applies to a.c. semiconductor non-motor load controllers and contactors intended for performing electrical operations by changing
the state of a.c. electric circuits between the ON-state and the OFF-state. They may include a series mechanical switching device
and are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. This Standard is identical with
and reproduced from IEC 60947-4-3:1999.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 64 pages

3947.5:- Control circuit devices and switching elements

3947.5.1:2000 (Withdrawn)

3947.5.2:2000 (Withdrawn)

3947.5.3:2000 Requirements for proximity devices with defined behaviour under fault conditions
Applies to proximity devices with an enhanced resistance to fault. Specifies requirements for four different types of PDF: PDF with
designed reliability; PDF with test capability, PDF with single fault tolerance and PDF with self-monitoring. This Standard is identical
with and reproduced from IEC 60947-5-3:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

3947.5.4:2000 (Withdrawn)

3947.5.5:2000 Electrical emergency stop device with mechanical latching function


Applies to electrical control circuit devices and switching elements with mechanical latching function, which are used to provide an
emergency stop signal. Provides detailed specifications relating to the electrical and mechanical construction of such devices and
their testing. This Standard is identical with and reproduced from IEC 60947-5-5:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

3947.5.6:2000 D.C. interface for proximity sensors and switching amplifiers (NAMUR)
Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The
switching amplifier contains a d.c. source to supply the control circuit and is controlled by the variable internal resistance of the
proximity sensor. This Standard is identical with and reproduced from IEC 60947-5-6:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

3947.6:- Multiple function equipment

3947.6.1:2001 Automatic transfer switching equipment


Applies to automatic transfer switching equipment to be used in emergency power systems with interruption of the supply to the load
during transfer, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. Specifies characteristics of equipment,
conditions with which the equipment must comply, tests intended to confirm these conditions have been met and data to be marked
on the equipment and/or provided by the manufacturer. This Standard is identical with and has been reproduced from IEC 60947-6-
1:1989 plus Corrigendum:1991 plus Amendment 1:1994 and Amendment 2:1997.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 34 pages

3947.6.2:2001 (Withdrawn)

3947.7.1:2001 (Withdrawn)
AS/NZS 3951.10:1994 (Withdrawn)

AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations


Sets out the safety and physical requirements for light-transmitting screens and curtains intended to provide protection against
hazardous radiations generated during welding processes while simultaneously affording visual contact with the working position.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages

AS/NZS 3964:- Information technology - Open Systems Interconnection - Common management


information protocol

3964.2:1994 Protocol implementation conformance statement proforma


Provides the protocol implementation conformance statement proforma in compliance with the relevant requirements of
NZS/ISO/IEC 9596-1. Identical with and reproduced from ISO/IEC 9596-2:1993.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 62 pages

AS/NZS 3966: (Withdrawn)

AS/NZS 3967:- Information processing - SGML support facilities - Techniques for using SGML

3967.11:1994 Application at ISO Central Secretariat for international Standards and technical reports
Defines the elements required, generic identifiers, attributes and their structure for international Standards and technical reports (ISO
Central Secretariat SGML application), and also contains the formal SGML document type definition. This standard is identical with
and reproduced from ISO/IEC TR 9573-11:1992.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 73 pages

3967.13:1994 Public entity sets for mathematics and science


Defines character entity sets for some of the widely used special graphic characters. The entity repertoires are based on applicable
published and proposed international Standards for coded character sets. This standard is identical with and reproduced from
ISO/IEC TR 9573-13:1991.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 83 pages

AS/NZS 3968:- Information technology - Database languages - SQL

3968.0:1994 Definition of data structures and basic operations


Provides a definition of data structures and basic operations performed on SQL-data and functional capabilities for creating,
accessing, maintaining, controlling and protecting SQL-data. This standard is identical with and reproduced from ISO/IEC
9075:1992.
Repirnted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 607 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

3968.3:1998 Call-level interface


Specifies the procedures that may be used to execute statements of the database language SQL from within an application written in
a standard programming language in such a way that procedures used are independent of the SQL statements to be executed. This
Standard is identical with and has been reproduced from ISO/IEC 9075-3:1995.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 225 pages

AS/NZS 3973:2005 Shower / toilet chairs (mobile and static)


Specifies materials, construction, performance and labelling requirements for chairs which are intended for use in showers and
toilets. It covers requirements for mobile shower/commode chairs, static commode chairs and stools, and static chairs and stools for
use in showers. It does not cover use in swimming pools or other corrosive environments.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages
AS/NZS 3982:1996 Urinals
Specifies materials, manufacture and methods of test for urinals.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS/AS 3983-1991 Metal drums for insulated electric cables and bare conductors
Specifies the requirements for metal drums for the transport and storage of insulated electric cables, bare conductors or other
products for which the drums are suitable.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 10 pages

AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification


Specifies requirements for the qualification of welding and brazing procedures, welders and brazers, and requirements for production
weld testing, other than non-destructive examination, when used in the construction of boilers, pressure vessels, piping and their
components. Specific details are given for manual metal-arc welding, flux cored-arc welding, gas metal-arc welding, gas tungsten-arc
welding, submerged-arc welding, electroslag, and oxy-acetylene welding. Details are also given for torch brazing, furnace brazing,
induction brazing, resistance brazing and dip brazing. The welding and brazing of carbon, carbon-manganese, and low and high
alloy steels, as well as copper, aluminium, nickel, titanium and alloys of these materials, are included.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 90 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4011:1997 Single-use examination gloves - Specification


Specifies requirements for single-use gloves intended to protect the user and a patient from cross-contamination during medical and
dental examinations and diagnostic or therapeutic procedures. It also covers single-use gloves intended for use in handling
contaminated medical materials, and includes particular requirements for regulatory authority application. It is technically equivalent
to and reproduced from ISO 11193:1994. Appendices contain variations to materials, physical properties and marking requirements.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4012:1999 Domestic solid fuel burning appliance - Method for determination of power output and
efficiency
Specifies a method for the determination of the average efficiency and average thermal power output from batch feed domestic solid
fuel burning appliances.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission
Specifies a method and requirements for determining the rate of particulate emission from batch feed solid fuel burning appliances.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

AS/NZS 4014:- Domestic solid fuel burning appliances - Test fuels

4014.1:1999 Hardwood
Specifies a test method for assessing hardwood test fuels used when determining the power output, efficiency and particulate
emission of domestic solid fuel appliances.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4014.2:1999 Softwood
Specifies a test method for assessing softwood test fuels used when determining the power output, efficiency and particulate
emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4014.3:1999 Lignite briquettes


Specifies a test method for assessing lignite briquette test fuels used when determining the power output, efficiency and particulate
emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4014.4:1999 Sub-bituminous coal


Specifies a test method for assessing sub-bituminous coal test fuels used when determining the power output, efficiency and
particulate emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4014.5:1999 Semi-anthracite coal briquettes


Specifies test method for assessing semi-anthracite coal briquettes used when determining the power output, efficiency and
particulate emission of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4014.6:2007 Wood pellets


Specifies test methods for assessing pellet test fuels used when determining the power output efficiency and particulate emission of
domestic solid fuel appliances.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

AS/NZS 4019:- Information technology - Open Systems Interconnection - The Directory

4019.1:1996 Overview of concepts, models and services


Specifies the concepts of the Directory and the directory information base as well as presenting an overview of the services and
capabilities which they provide. This standard is identical with and reproduced from ISO/IEC 9594-1:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

4019.2:1996 Models
Specifies a number of different models for the Directory to be used as a framework for the other parts of this Standard. Identical with
and reproduced from ISO/IEC 9594-2:1995.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 153 pages

4019.3:1996 Abstract service definition


Specifies in an abstract way the external visible service provided by the Directory. Identical with and reproduced from ISO/IEC 9594-
3:1995.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 57 pages

4019.4:1996 Procedures for distributed operation


Specifies the procedures by which the distributed components of the Directory interwork in order to provide a consistent service to its
users. Identical with and reproduced from ISO/IEC 9594-4:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 102 pages

4019.5:1996 Protocol specifications


Specifies the Directory access protocol, the Directory system protocol, the Directory information shadowing protocol and the
Directory operational binding management protocol fulfilling the abstract services specified in other parts of this Standard. Identical
with and reproduced from ISO/IEC 9594-5:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

4019.6:1996 Selected attribute types


Specifies a number of attribute types which may be found useful across a range of applications of the Directory as well as a number
of standard attribute syntaxes and matching rules. Identical with and reproduced from ISO/IEC 9594-6:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 35 pages

4019.7:1996 Selected object types


Specifies a number of attribute sets and object classes which may be found useful across a range of applications of the Directory.
Identical with and reproduced from ISO/IEC 9594-7:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

4019.8:1996 Authentication framework


Specifies a framework for the provision of authentication services by the Directory to its users. These users include the Directory
itself as well as other applications and services. Identical with and reproduced from ISO/IEC 9594-8:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 35 pages

4019.9:1996 Replication
Specifies the replication capabilities provided by the Directory system agents to improve the level of service to Directory users.
Identical with and reproduced from ISO/IEC 9594-9:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 33 pages

AS/NZS 4020:2005 Testing of products for use in contact with drinking water
To allow water quality requirements, as adopted by the particular authority responsible for water supply quality, to be met at
consumers’ taps. Besides the effects of materials, this quality will depend on other factors, including commissioning and operational
procedures such as flushing of mains, which are the responsibility of the local water agency.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 84 pages

AS/NZS 4026:2008 Electric cables - For underground residential distribution systems


Specifies the construction of a rationalized range of cables used by electricity supply authorities in underground residential
distribution (URD) systems. Cable data and recommendations to assist in the selection of the appropriate cables are provided in
Appendix A. Guidelines on information that should be supplied with enquiries or orders are provided in Appendix B.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 44 pages

AS/NZS 4029:- Stationary batteries - Lead-acid

4029.2:2000 Valve-regulated type


Specifies safety requirements, methods of specifying performance and methods of test for valve-regulated, stationary, lead-acid
batteries. It comprises IEC 60896-2 Stationary lead-acid batteries - General requirements and methods of test, Part 2: Valve-
regulated types subject to variations for conditions in Australia and New Zealand.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4033:- Information technology - Text communication - Message-oriented text interchange systems

4033.2:1998 Overall architecture


Defines the overall architecture of a message handling system (also known as X.400) including abstract models, various
configurations and naming and addressing issues. This Standard is identical with and has been reproduced from ISO/IEC 10021-
2:1996 and its Technical Corrigendum 1:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 88 pages

4033.4:1999 Message transfer system - Abstract service definition and procedures


Defines the abstract-service provided by the message transfer system and specifies the procedures to be performed by message
transfer agents. This Standard is identical with and has been reproduced from ISO/IEC 10021-4:1997 and its Technical Corrigendum
1:1998.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 158 pages
4033.6:1999 Protocol specifications
Specifies the message transfer system (MTS) access protocol P3 used between a remote user-agent and the MTS to provide an
MTS abstract service. This Standard is identical with and has been reproduced from ISO/IEC 10021-6:1996 and Technical
Corrigendum.1:1998.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

4033.7:1999 Interpersonal messaging system


Defines interpersonal messaging, a form of messaging handling tailored for ordinary interpersonal business and private
correspondence. This Standard is identical with and has been reproduced from ISO/IEC 10021-7:1997, Technical Corrigendum
1:1998 and Amendment 1:1998.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 175 pages

4033.10:1999 MHS routing


Specifies the means by which messages are routed through the message handling system, supplementing the procedures given in
AS/NZS 4033.4:1999. This Standard is identical with and has been reproduced from ISO/IEC 10021-10:1998.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 66 pages

AS/NZS 4034:- Motor vehicles - Cargo barriers for occupant protection

4034.1:2008 Cargo barriers


Provides manufacturers, suppliers and users with the requirements for cargo barriers in order to protect the passengers and drivers,
in the event of a collision, when seated in front of cargo in a motor vehicle.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 48 pages

4034.2:2008 Partial cargo barriers


Provides manufacturers with the requirements for partial cargo barriers in order to protect the passengers and drivers in the event of
a collision when seated in front of cargo in a motor vehicle.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 44 pages

AS/NZS 4040:- Methods of testing sheet roof and wall cladding

4040.4:1996 Resistance to impact (sandbag) for sheet roof materials


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4040.5:1996 Resistance to impact (sandbag) for wall boards


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4049:- Paints and related materials - Road marking materials

4049.3:1996 Waterborne paint - For use with drop-on beads


Provides requirements for waterborne paints used for line marking materials for bituminous and concrete road surfaces.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4051:1998 (Superseded by AS/NZS CISPR 15:2002)

AS/NZS 4052:1992 Guidance on the use of the substitution method for measurements of radiation from
microwave ovens for frequencies above 1 GHz
Describes a method of measurement for small microwave ovens (largest dimension less than 1 m) and a separate method of
measurement for large microwave ovens (largest dimension exceeding 1 m). Technically identical with IEC/CISPR 19:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages
AS/NZS 4053:1997 Limits and methods of measurement of immunity characteristics of sound and television
broadcast receivers and associated equipment
Specifies limits for immunity characteristics to interfering signals applicable to radios, televisions and associated equipment. It is
identical with and reproduced from IEC/CISPR 20:1996 and contains variations to test methods to incorporate local television
transmission aspects.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 80 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4056:- Pliers and nippers

4056.1:1992 Nomenclature
Gives the nomenclature of pliers and nippers for general use in English, French and Russian. The equivalent terms in the German,
Italian and Spanish languages are given in an Annex. Identical with and reproduced from ISO 5742:1982.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

4056.2:1992 General technical requirements


Specifies the general technical requirements for pliers and nippers for general use. Identical with and reproduced from ISO
5743:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4056.3:1992 Methods of test


Specifies methods of test of pliers and nippers for general use. Identical with and reproduced from ISO 5744:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4056.4:1992 Pliers for gripping and manipulating - Dimensions and test values
Specifies the principal dimensions and test values for pliers for gripping and manipulating for general use. Identical with and
reproduced from ISO 5745:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4056.5:1992 Engineer`s and lineman`s pliers - Dimensions and test values


Specifies the principal dimensions and test values for engineer`s and lineman`s pliers for general use. Identical with and reproduced
from ISO 5746:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4056.6:1992 Lever assisted side-cutting pliers, end and diagonal cutting nippers - Dimensions and test
values
Specifies the principal dimensions and test values for lever assisted side cutting pliers, end and diagonal cutting nippers for general
use. Identical with and reproduced from ISO 5747:1984.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4056.7:1992 End-cutting nippers - Dimensions and test values


Specifies the principal dimensions and test values for end cutting nippers for general use. Identical with and reproduced from ISO
5748:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4056.8:1992 Diagonal cutting nippers - Dimensions and test values


Specifies the principal dimensions and test values for diagonal cutting nippers for general use. Identical with and reproduced from
ISO 5749:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4056.9:1992 Multiple slip joint pliers - Dimensions and test values


Specifies the principal dimensions and test values for multiple slip joint pliers for general use. Identical with and reproduced from
ISO 8976:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4056.10:1992 Construction worker`s pincers - Dimensions and test values


Specifies the principal dimensions and test values for construction worker`s pincers for general use. Identical with and reproduced
from ISO 9242:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4056.11:1992 Carpenter`s pincers - Dimensions and test values


Specifies the principal dimensions and test values for carpenter`s pincers for general use. Identical with and reproduced from ISO
9243:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4056.12:1992 Slip joint pliers - Dimensions and test values


Specifies the principal dimensions and test values for slip joint pliers for general use. Identical with and reproduced from ISO
9343:1988.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)


Describes minimum requirements for materials and manufacture of controlled quality precast concrete pipes. It also describes
minimum requirements for sampling, testing and classifying concrete pipes manufactured in accordance with this Standard.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 64 pages

AS/NZS 4059:1996 Anaesthetic machines - Non-electrical - For use with humans


Specifies the basic requirements for anaesthetic machines and associated components up to and including the fresh (common) gas
outlet, for use with humans. Requirements are also included for anaesthetic vaporizers intended for incorporation into anaesthetic
machines. Does not apply to intermittent-flow anaesthetic machines which deliver gas to the breathing system at varying rates in
response to the patient`s inspiratory efforts, and to dental nitrous oxide-oxygen analgesia machines. This standard is based on ISO
5358:1992.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4063:1992 Timber - Stress-graded - In-grade strength and stiffness evaluation


Describes procedures for evaluating structural properties of graded timber and verifying accuracy of specific grading techniques.
Requirements for resolving doubts concerning specified design properties of particular populations of graded timber are specified.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 4064:1997 Information technology - Telecommunications and information exchange between systems
- Private telecommunications networks - Digital channel aggregation
Defines a set of procedures used in the provision of higher band width digital bi-directional channels by combining multiple switched
or non-switched 56 kbit/s or 64 kbit/s digital bearer channels across public or private networks. Identical with and reproduced from
ISO/IEC 13871:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 93 pages

AS/NZS 4065:2000 Concrete utility services poles


Specifies minimum requirements for the materials, design, fabrication and erection of concrete utility services poles. It is intended to
be used in conjunction with the forthcoming issue of AS 4676, Structural design requirements for utility services poles.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages
AS/NZS 4066:1992 Eye protectors for racquet sports
Specifies optical, field of view, area of coverage and impact resistance requirements for eye protectors for use in racquet sports such
as squash. Guidance is provided in a separate Appendix on the requirements for sports eye protectors with prescription lenses.
Reprinted to incorporate Amendment 1:1994
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4067:2004 Firefighters' helmets


Specifies performance requirements for the materials, design and construction of helmets intended for use by persons involved in
fighting structural fires in city and urban areas.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 46 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

NZS/ISO 4079:1991 (Withdrawn)

AS/NZS 4081:2001 The storage and handling of liquid and liquefied polyfunctional isocyanates
Sets out requirements and recommendations for the safe storage and handling of polyfunctional isocyanates (PFIs). Advice is given
on installation design, operations, personnel safety and waste disposal. Guidance on fire protection and emergency procedures is
also provided.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 65 pages

NZS/AS 4087:1996 (Withdrawn)

AS/NZS 4088:- Specification for burning behaviour of upholstered furniture

4088.1:1996 Upholstery materials for domestic furniture - Smouldering ignitability


Specifies testing and performance requirements for upholstery materials for use in domestic furniture.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

NZS/AS 4092-1993 (Withdrawn)

AS/NZS 4093:1994 Information technology - Telecommunications and information exchange between systems
- Protocol identification in the network layer
Provides a description of a means to permit an identification of a protocol in the network layer and provides a record of the structure
and allowable ranges of protocol identifiers which can be assigned by JTC 1 and other authorities. Identical with and reproduced
from ISO/IEC TR 9577:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

AS/NZS 4094:1993 Information technology - Open Systems Interconnection - Local area networks - Medium
access control service definition
Defines the medium access control service found in local area network architecture in abstract terms, the primitive actions and
events of the service, the parameters associated with each primitive action and event, and the form they take, and the
interrelationship between, and the valid sequences of these actions and events. Identical with and reproduced from ISO/IEC
10039:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

AS/NZS 4095:1993 Information technology - Telecommunications and information exchange between systems
- End system routing information exchange protocol for use in conjunction with AS 3604
Defines a protocol for the exchange of routing information between an end system and a subnetwork address resolution entity. It is
applicable to end systems which operate according to the main body of AS 3604 to provide and support the OSI connection-mode
network service and sub-network address resolution entities. Identical with and reproduced from ISO/IEC 10030:1990.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

4095, Supplement 1:1995 Information technology - Telecommunications and information exchange between systems
- End system routing information exchange protocol for use in conjunction with AS 3604 -
Protocol implementation conformance statement
Supplies the protocol implementation conformance statement proforma in compliance with the relevant requirements. Identical with
and reproduced from ISO/IEC 10030:1990/Amd 2:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

AS/NZS 4096:1993 (Withdrawn)

AS/NZS 4097:1993 Information processing - SGML support facilities - Registration procedures for public text
owner identifiers
Applies the assignment of unique owner prefixes to owners of public text conforming to AS 3514. It describes the procedures
whereby such assignments are made, and the method of constructing registered owner identifiers from them. Identical with and
reproduced from ISO 9070:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

AS/NZS 4098:1993 (Withdrawn)

BS 4099, Part 1:1986 (Endorsement cancelled)

AS/NZS 4099:1994 Information technology - Telecommunications and information exchange between systems
- Provision of the OSI connection-mode network service by packet mode terminal
equipment connected to an integrated services digital network
Specifies the method of providing a connection-mode network service by packet mode terminal equipment connected to an ISDN in
accordance with procedures described in ITU-T X.31. Identical with and reproduced from ISO/IEC 9574:1992.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 4101:1993 Information technology - Information resource dictionary system framework


Describes the framework for a number of international standards that specify a specialized information system, called an information
resource dictionary system (IRDS). An IRDS is used to control and document an enterprise`s information resources. Identical with
and reproduced from ISO/IEC 10027:1990.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

NZS 4102:1996 Safer house design (Guidelines to reduce injury at home)


Provides guidelines for the design of dwellings, that will assist in the prevention of unintentional personal injury. It describes factors
to be taken into account for design that will reduce the likelihood of an injurious incident occurring in association with any building
element, fitting or amenity either alone or in association with other elements, fittings or amenities.
$64.95+GST (Members), $81.19+GST (Retail), 78 pages

AS/NZS 4102:1993 Information technology - Integrated services digital network primary access connector at
reference points S and T
Specifies the 8-contact (plug and jack) and the assignments of its contact numbers for use in the physical interfaces of integrated
services digital network (ISDN) primary rate access services conforming to CCITT Recommendation I.41. Identical with and
reproduced from ISO/IEC 10173:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

AS/NZS 4103:- Information technology - Open Systems Interconnection - Conformance testing


methodology and framework

4103.1:1993 General concepts


Specifies a general methodology for testing the conformance of products to international standards or CCITT Recommendations that
specify OSI protocols which the products are claimed to implement. The methodology also applies to testing conformance to an
international standard or CCITT Recommendations that specifies a transfer syntax to the extent that can be determined by testing it
in combination with a specific OSI protocol. Identical with and reproduced from ISO/IEC 9646-1:1991.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

4103.2:1993 Abstract test suite specification


Specifies requirements and gives guidance for the production of system-independent conformance test suites for OSI international
standards or CCITT Recommendations. In particular, it is applicable to the production of all conformance testing standards for OSI
and ISDN two-party protocols, including all draft versions of such conformance testing standards. Identical with and reproduced from
ISO/IEC 9646-2:1991.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

4103.3:1994 The tree and tabular combined notation


Defines a test notation for OSI conformance test suites, which is independent of test methods, layers and protocols, and which
reflects the abstract testing methodology defined in AS/NZS 4103.1 and AS/NZS 4103.2. Identical with and reproduced from
ISO/IEC 9646-3:1992.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 177 pages

4103.4:1993 Test realization


Specifies requirements and gives guidance concerning the realization of a means of testing implementations under test in
conformance with a reference OSI standardized abstract test suite specified in compliance with ISO/IEC 9646-2 (AS/NZS 4103.2).
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

4103.5:1993 Requirements on test laboratories and clients for the conformance assessment process
Specifies requirements on both the test laboratory and the client, for the conduct of the conformance assessment process. The
requirements are those necessary to achieve comparability of results of tests on similar implementations performed by different test
laboratories. Identical with and reproduced from ISO/IEC 9646-5:1991.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages

NZS 4104:1994 Seismic restraint of building contents


This Standard aims to reduce the risk of injury to people and ensure access within a building after an earthquake by securing
building contents. The second aim is to reduce the risk of damage to building contents. This standard provides the basis for the
design for restraints and provides sketches of many simple, practical details for a range of common items including computer
equipment, storage racks, cabinets, ornaments, appliances etc. It is applicable to items which are required to survive an earthquake
to be available to rescue and recovery services to businesses and general public. Applies only to items less than 300 kg in weight.
$64.95+GST (Members), $81.19+GST (Retail), 52 pages

AS/NZS 4104:1993 Information technology - Telecommunications and information exchange between systems
- Network/transport protocol interworking specification
Specifies the circumstances in which interworking functional units may be used to provide the OSI connection mode transport
service end-to-end between two end systems, where one of the end systems is accessed using the connection-mode transport
protocol as defined in ISO 8073/Add.2 in combination with the protocol defined in ISO 8473 and the other end system is accessed
using the connection- mode transport protocol as defined in AS/NZS 2912 in combination with the procedures defined in AS 3621.
Identical with and reproduced from ISO/IEC TR 10172:1991.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages

AS/NZS 4105:1993 Information technology - Open Systems Interconnection - Protocol specification for the
commitment, concurrency and recovery service element
Specifies the protocol of the commitment, concurrency and recovery (CCR) service when invoked by other specifications. It is used
whenever the CCR service does not encompass any communication activity which makes direct or indirect use of the session activity
management services. Identical with and reproduced from ISO/IEC 9805:1990.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 33 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

4105, Supplement 1:1995 Information technology - Open Systems Interconnection - Protocol specification for the
commitment, concurrency and recovery service element - session mapping changes
Specifies two protocol versions, one which makes use of the session data separation functional unit and one that does not. Identical
with and reproduced from ISO/IEC 9805:1990/Amd 2:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 20 pages

AS/NZS 4106:1993 Information technology - Open Systems Interconnection - Service definition for the
commitment, concurrency and recovery service element
Intended for reference by other specifications when the functionality of commitment, concurrency and recovery is required. This
Standard can be referenced whenever the processing of two or more application-entity invocations in a distributed application needs
to be organized into an atomic action; it also defines services that are used during such processing. Identical with and reproduced
from ISO/IEC 9804:1990.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 42 pages

AS/NZS 4107:- Information technology - Telecommunications and information exchange between systems
- Protocol combinations to provide and support the OSI network service

4107.1:1993 General principles


Refers to those international standards which define the architectural principles governing the provision of the network service;
defines terms which may be used in specifying the environments in which protocol combinations operate; specifies principles and a
framework for describing the support of the OSI network service and defines the conformance principles to be followed in the other
parts of AS/NZS 4107 which specify the requirements for equipment claiming conformance to AS/NZS 4107. Identical with and
reproduced from ISO/IEC 8880-1:1990.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4107.2:1994 Provision and support of the connection-mode network service


Provides a description of the connection-mode network service, including the field of application. Identical with and reproduced from
ISO/IEC 8880-2:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4107.3:1993 Provision and support of the connectionless-mode network service


Describes the provision and support of the connectionless-mode network service defined in AS 2994. Identical with and reproduced
from ISO/IEC 8880-3:1990.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 4109: (Withdrawn)

AS/NZS 4110:1993 Information technology - SGML and text-entry systems - Guidelines for SGML syntax-
directed editing systems
Describes a set of functions which an SGML syntax-directed editing system may have in order to help users manipulate documents
marked up according to the rules of SGML. Identical with and reproduced from ISO/IEC TR 10037:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 4114:- Spray painting booths, designated spray painting areas and paint mixing rooms

4114.1:2003 Design, construction and testing


Specifies requirements for the design, construction and testing of spray painting booths, designated spray painting areas and paint
mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes
used. It is intended to be read in conjunction with AS/NZS 2381.1.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

4114.2:2003 Installation and maintenance


Specifies requirements for the installation and maintenance of spray painting booths, designated spray painting areas and paint
mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes
used. It is intended to be read in conjunction with Part 1 and AS/NZS 2381.1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

NZS/BS 4116:- (Withdrawn)

AS/NZS 4116:1993 (Withdrawn)

AS/NZS 4117:1999 Surge protective devices for telecommunication applications


Specifies minimum electrical performance, environmental, marking and disposal requirements for stand-alone surge protection
devices having two or more terminals that are used in telecommunication applications. The Standard also provides methods of tests
for ascertaining compliance with the electrical requirements.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 4121:2001 Design for access and mobility: Buildings and associated facilities
Gives requirements for making buildings and facilities accessible to and useable by people with physical disabilities. Provides a
means of compliance with the New Zealand Building Code.
Also available on request in large format (A3) and in removable electronic media.
Cited in Building Act 2004; BIA Approved Documents D1/AS1, G1/AS1 and G5/AS1
$84.95+GST (Members), $106.19+GST (Retail), 124 pages

NZMP 4122:1989 (Superseded by NZS 4121:2001)

AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
Specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130 or AS 2698.2 or
POP-009. This Standard is applicable to fittings manufactured for the conveyance of water, fuel gas, and other fluids including
compressed air.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 60 pages

AS/NZS 4130:2003 Polyethylene (PE) pipes for pressure applications


Specifies requirements for polyethylene pipes for the conveyance of fluids under pressure. Such fluids include, but are not restricted
to, water, wastewater, slurries, compressed air, and fuel gas.
Cited in BIA Approved Documents G12/AS1 and G13/AS2
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages

AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
Specifies requirement for polyethylene compounds suitable for manufacturing polyethylene pipe and fittings for pressure
applications.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS 4134:1995 Information technology - Telecommunications and information exchange between systems
- Numbering and sub-addressing in private integrated services networks
Defines the requirements for the handling of network addresses for the identification of entities which use or provide
telecommunications services offered by private integrated services networks. It is one of a series of Standards applicable to private
integrated services networking. Identical with and reproduced from ISO/IEC 11571:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

AS/NZS 4135:1995 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Circuit-mode 64 kbit/s bearer services - Service
description, functional capabilities and information flows
Specifies the service description and control aspects for three basic circuit-mode bearer services which may be supported by a
private integrated services network. It is one of a series of Standards applicable to private integrated services networking. Identical
with and reproduced from ISO/IEC 11574:1994.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 63 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4136:- Information technology - Telecommunications and information exchange between systems
- Private integrated services network

4136.1:1995 Reference configuration for PISN exchanges (PINX)


Specifies a reference configuration for private integrated services network exchanges for their interconnection to form integrated
services networks. It is one of a series of Standards applicable to private integrated services networking. Identical with and
reproduced from ISO/IEC 11579-1:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

AS/NZS 4137:1995 (Superseded by AS/NZS 11572:1999)

AS/NZS 4138:1995 Information technology - Telecommunications and information exchange between systems
- Synchronization methods and technical requirements for private integrated services
networks
Specifies requirements necessary for the synchronization of private integrated services networks. It is one of a series of Standards
applicable to private integrated services networking. Identical with and reproduced from ISO/IEC 11573:1994.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 34 pages

AS/NZS 4144: (Withdrawn)

AS/NZS 4146:2000 Laundry practice


Specifies general laundry practice requirements and recommendations for commercial, industrial, hospital, institutional, on-premise
and coin-operated laundries as well as minimum performance requirements which should be attained in order to provide an
acceptable level of service.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages

AS/NZS 4147:1993 Information technology - Telecommunications and information exchange between systems
- The structure and coding of logical link control addresses in local area networks
Provides a description of the ISO 8802-2 (AS/NZS 4802.2) addressing conventions, the consideration for the manner in which new
logical link control address uses are assigned an entry and a record, in the form of a table, of assigned uses of address values.
Identical with and reproduced from ISO/IEC TR 10178:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

AS/NZS 4148:1994 Information technology - Hypermedia/Time-based structuring language (HyTime)


Defines a language and underlying model for the representation of hyperdocuments that link and synchronize static and dynamic
(time-based) information contained in multiple conventional and multimedia documents and information objects. The language is
known as the "Hypermedia/Time-based structuring language" or "HyTime". Identical with and reproduced from ISO/IEC
10744:1992.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 125 pages

AS/NZS 4149:1994 Telecommunications and information exchange between systems - Intermediate system to
intermediate system intra-domain routing information exchange protocol for use in
conjunction with the protocol for providing the connectionless-mode network service
Specifies procedures for the transmission of and the encoding of the protocol data units used for configuration and routine
information between network entities residing in intermediate systems within a single routing domain as well as procedures for the
correct interpretation of protocol control information and the functional requirements for implementations claiming conformance.
Identical with and reproduced from ISO/IEC 10589:1992.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 150 pages

AS/NZS 4150:- Information technology - Open Systems Interconnection - Conformance test suite for the
ACSE protocol

4150.1:1993 Test suit structure and test purposes


Applies to conformance test suites for testing association control service element protocol implementations which operate over a
connection oriented presentation service and which claim conformance to AS 3684. Identical with and reproduced from ISO/IEC
10169-1:1991.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

AS/NZS 4151:- Information technology - Open Systems Interconnection - Structure of management


information

4151.1:1994 Management information model


Provides a definition of the information model of managed objects and their attributes that will correspond to the information aspects
of the systems management model. Identical with and reproduced from ISO/IEC 10165-1:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

4151.2:1993 Definition of management information


Defines the managed object classes, attribute types, name bindings, packages, specific attributes, action types, parameter types and
notification types and specifies compliance requirements placed on other CCITT Recommendations and International Standards that
make use of these definitions. Identical with and reproduced from ISO/IEC 10165-2:1992.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 63 pages

4151.4:1993 Guidelines for the definition of managed objects


Specifies the relationship between the relevant OSI management Recommendations and International Standards and the definition
of managed object classes, and how these Recommendations and International Standards should be used by managed object class
definitions, and the appropriate methods to be adopted for the definition of managed object classes and their attributes, notifications,
actions and behaviour. Identical with and reproduced from ISO/IEC 10165-4:1992.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 47 pages

AS/NZS 4152:- Information technology - Open Systems Interconnection - Systems management

4152.1:1994 Object management function


Establishes a model that relates the service and generic definitions provided by the state management function to user requirements.
Identical with and reproduced from ISO/IEC 10164-1:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

4152.2:1994 State management function


Establishes a model that relates the service and generic definitions provided by the state management function to user requirements.
Identical with and reproduced from ISO/IEC 10164-2:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

4152.3:1994 Attributes for representing relationships


Specifies the attributes for representing relationships and establishes a model that relates the service and generic definitions to user
requirements. Identical with and reproduced from ISO/IEC 10164-3:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

4152.4:1994 Alarm reporting function


Establishes the model and defines the services provided for the alarm reporting function. Identical with and reproduced from
ISO/IEC 10164-4:1992.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

4152.5:1994 Event report management function


Establishes the model and defines the services provided for the event report management function. Identical with and reproduced
from ISO/IEC 10164-5:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

4152.6:1994 Log control function


Establishes the model and defines the services provided for the log control function. Identical with and reproduced from ISO/IEC
10164-6:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

4152.7:1993 Security alarm reporting function


Establishes user requirements for the service definition needed to support the security alarm reporting function, defines the service
and specifies the protocol provided by such a function. The relationship between the service and management`s notification is
defined together with the relationships with other systems management functions. The conformance requirements are specified.
Identical with and reproduced from ISO/IEC 10164-7:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

4152.8:1994 Security audit trail function


Establishes the model and defines the services provided for the security audit trail function. Identical with and reproduced from
ISO/IEC 10164-8:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 26 pages

AS/NZS 4153:- Information technology - Open Systems Interconnection - Procedures for the operation of
OSI registration authorities

4153.1:1994 General procedures


Specifies procedures which are generally applicable to registration of objects within the Open Systems Inter-connection environment.
Identical with and reproduced from ISO/IEC 9834-1:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

4153.1, Supplement 1:1999 General procedures - Incorporation of object identifiers components (Supplement to
AS/NZS 4153.1:1994)
Incorporates object identifier components into the operation of OSI registration authorities. This Supplement is identical with and has
been reproduced from ISO/IEC 9834-1:1993/Amd.1:1997.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4153.1, Supplement 2:1999 General procedures - Incorporation of the root arcs of the object identifier tree
(Supplement to AS/NZS 4153.1:1994)
Specifies the root arcs of the object identifier tree. This Supplement is identical with and has been reproduced from ISO/IEC 9834-
1:1993/Amd.2:1998.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4153.2:1994 Registration procedures for OSI document types


Specifies the contents of register entries recording information about OSI document types and assigns an unambiguous name to the
type definitions. Identical with and reproduced from ISO/IEC 9834-2:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

4153.3:1999 Registration of values of RH-name-tree components for joint ISO and ITU-T use
Specifies the assignment of values to RH-name-tree components for joint ISO-ITU-T use. This Standard is identical with and has
been reproduced from ISO/IEC9834-3:1998.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4153.4:1993 Register of VTE profiles


Specifies the contents of register entries recording the information about VTE-profiles and assigning unambiguous names of ASN.1
type OBJECT IDENTIFIER to VTE-profile definitions. Identical with and reproduced from ISO/IEC 9834-4:1991.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4153.5:1993 Register of VT control object definitions


Specifies the contents of the register entries recording the information about virtual terminal (VT) control object definitions and
assigning unambiguous names of ASN.1 type OBJECT IDENTIFIER to VT control object definitions. Identical with and reproduced
from ISO/IEC 9834-5:1991.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

4153.6:1994 Application processes and application entities


Specifies the procedures applicable to the registration of application-processes and application-entities. Identical with and
reproduced from ISO/IEC 9834-6:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4153.7:1999 Assignment of international names for use in specific contexts


Specifies the unambiguous assignment of names in the context of O/R addresses, directory names and object identifiers. This
Standard is identical with and has been reproduced from ISO/IEC 9834-7:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

AS/NZS 4157:- Information technology - Telecommunications and information exchange between systems
- X.25 DTE conformance testing

4157.1:2000 General principles


Specifies the framework and principles of a set of tests to evaluate conformance of DTE to AS 3512 (ISO/IEC 7776) or AS/NZS 3621
(ISO/IEC 8208). This Standard is identical with and has been reproduced from ISO /IEC 8882.1:1996.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 5 pages

4157.2:2000 Data link layer conformance test suite


Defines an abstract test suite for testing the conformance of the data link layer of a data terminal unit with respect to AS 3512
(ISO/IEC 7776). This Standard is identical with and has been reproduced from ISO/IEC 8882.2:1995.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 205 pages

4157.3:2000 Packet layer conformance test suite


Specifies a set of abstract tests for the testing of data terminal equipment operating at the packet layer designed to access a public
or private packet-switched network conforming to ITU-T Recommendation X.25. This Standard is identical with and has been
reproduced from ISO/IEC 8882.3:1995.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 153 pages

AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
Specifies the requirements for factory-applied thermal-bonded polymeric corrosion protective coatings (barrier coatings). For the
purposes of this Standard, the term polymeric coating is intended to encompass both thermoplastic and thermosetting coating
materials, which are used to coat both the internal and external surfaces of valves and fittings. This Standard covers the following
service application areas: (a) Factory-applied coatings and associated coatings used for repair; (b) Ductile iron, grey cast iron,
malleable iron, steel and copper alloy based substrates; (c) Valves, fittings and their components and associated equipment; (d)
Contact with water, and wastewater up to 50 degrees C; (e) Above and below ground exposure. Some coatings may not be suitable
for all wastewaters. Compatibility should be checked with the manufacturer. Guidelines on requirements to be specified by the
purchaser are given in Appendix A. Means of demonstrating compliance with this Standard are given in Appendix B.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4159:- Information technology - Font information interchange

4159.1:1994 Architecture
Defines a method of naming glyphs and glyph collections, independent of any document encoding technique; it assumes that one or
more methods of associating document encoding techniques with glyph identifiers used in font resources will be provided by text
processing systems. Identical with and reproduced from ISO/IEC 9541-1:1991.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 82 pages

4159.2:1994 Interchange format


Specifies the interchange formats for font information, and the minimum subsets of that information required for interchange.
Identical with and reproduced from ISO/IEC 9541-2:1991.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages

AS/NZS 4160:1994 Information processing systems - Information exchange between systems - Synchronous
transmission signal quality at DTE/DCE interfaces
Specifies signal quality requirements for serial data transmission at the interface between synchronous transmission data terminal
equipment and data circuit-terminating equipment. Identical with and reproduced from ISO 9543:1989.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 4161:2000 Information technology - Telecommunications and information exchange between systems
- DTE/DCE interface back-up control operation using ITU-T Recommendation V.24
interchange circuits
Specifies the procedure for back-up operation applicable to data transmission on a leased line when implemented through a single
interface, controlling both the leased and the back-up facilities using ITU-T Recommendation V.24. This Standard is identical with
and has been reproduced from ISO/IEC 8480:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 5 pages

AS/NZS 4162:1994 Information technology - Galvanic isolation of balanced interchange circuits


Specifies galvanic isolation of balanced interchange circuits using optocoupler integrated circuit technology and provides for data
transmission in the two-condition code. Identical with and reproduced from ISO/IEC 9549:1990.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 4164:1994 Information technology - Telecommunications and information exchange between systems
- Formal description of AS 2911 in LOTOS
Describes the OSI transport service using the formal description technique LOTOS. Identical with and reproduced from ISO/IEC TR
10023:1992.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

AS/NZS 4165:1994 Information technology - Telecommunications and information exchange between systems
- Formal description of AS/NZS 2912 (Classes 0, 1, 2, 3) in LOTOS
Describes the classes 0, 1, 2, and 3 of the OSI transport protocol using the formal description technique LOTOS. Identical with and
reproduced from ISO/IEC TR 10024:1992.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 144 pages

AS/NZS 4166:1994 Information processing systems - Data communications - Use of the X.25 packet level
protocol in local area networks
Specifies the operation of the X.25 packet level protocol using the logical link control type 1 and 2 procedures as defined in AS/NZS
4802.2. Identical with and reproduced from ISO/IEC 8881:1989.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 4167:- Information technology - Text and office systems - Document filing and retrieval

4167.1:1994 Abstract service definition and procedures


Specifies a client-server type model in accordance with the distributed-office-application model, specifies functions and services
provided by document filing and retrieval (DFR) servers, specifies a DFR model for managing documents and groups of documents,
and specifies the DFR abstract service using the principles established by the abstract service definition conventions. Identical with
and reproduced from ISO/IEC 10166-1:1991.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 130 pages

4167.2:1994 Protocol specification


Specifies the abstract syntax of the document filing and retrieval (DFR) access protocol, specifies how the DFR access protocol
supports the DFR abstract service, specifies the mapping of the DFR access protocol onto the services used and specifies the
requirements for conformance with DFR access protocol. Identical with and reproduced from ISO/IEC 10166-2:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

NZS/BS 4168:- Hexagon socket screws and wrench keys: metric series

Part 1:1981 (Withdrawn, use AS/NZS 1420:1996)

Part 2:1981 (Withdrawn, use AS/NZS 1421:1996)

Part 3:1981 (Withdrawn, use AS/NZS 1421:1996)

Part 4:1981 (Withdrawn, use AS/NZS 1421:1996)

Part 5:1981 (Withdrawn, use AS/NZS 1421:1996)

Part 6:1982 (Withdrawn)

Part 7:1982 Specification for hexagon socket shoulder screws


Specifies screws with ISO metric threads and shoulder diameters from 6 mm up to and including 24 mm.
Adopted Standard
$90.91+GST (Members), $113.64+GST (Retail), 8 pages
Amendment 1, 1987 $29.95+GST (Members), $37.44+GST (Retail)

Part 8:1982 Specification for hexagon socket countersunk head screws


Specifies screws with ISO metric threads and diameters from 3 mm to and including 20 mm.
Adopted Standard
$90.91+GST (Members), $113.64+GST (Retail), 8 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Part 9:1983 (Withdrawn)

AS/NZS 4170:- Information technology - International standardized profiles TB, TC, TD and TE -
Connection-mode transport service over connection-mode network service

4170.1:1994 Subnetwork-type independent requirements for group TB


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service and specifies the subnetwork-type independent requirements for group TB (transport protocol classes 0, 2 and
4). Identical with and reproduced from ISO/IEC ISP 10609-1:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

4170.2:1994 Subnetwork-type independent requirements for group TC


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the network-type independent requirements for group TC (transport protocol classes 0 and 2).
Identical with and reproduced from ISO/IEC ISP 10609-2:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

4170.3:1994 Subnetwork-type independent requirements for group TD


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the subnetwork-type independent requirements for group TD (transport protocol class 0).
Identical with and reproduced from ISO/IEC ISP 10609-3:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4170.4:1994 Subnetwork-type independent requirements for group TE


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and species the definition of profiles TB1111/TB1121. These profiles are in the TB group (transport classes 0,
2 and 4). Identical with and reproduced from ISO/IEC ISP 10609-4:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4170.5:1994 Definition of profiles TB1111/TB1121


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the definition of profiles TB1111/TB1121. These profiles are in the TB group (transport classes
0, 2 and 4). Identical with and reproduced from ISO/IEC ISP 10609-5:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4170.6:1994 Definition of profiles TC1111/TC1121


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the definition of profiles TC1111/TC1121. These profiles are in the TC group (transport classes
0 and 2). Identical with and reproduced from ISO/IEC ISP 10609-6:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4170.7:1994 Definition of profiles TD1111/TD1121


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the definition of profiles TD1111/TD1121. These profiles are in the TD group (transport class
0). Identical with and reproduced from ISO/IEC ISP 10609-7:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4170.8:1994 Definition of profiles TE1111/TE1121


Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the definition of profiles TE1111/TE1121. These profiles are in the TE group (transport class 2).
Identical with and reproduced from ISO/IEC ISP 10609-8:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4170.9:1994 Subnetwork-type dependent requirements for the network layer, data link layer and
physical layer concerning permanent access to a packet switched data network using
virtual calls
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connection-
mode network service, and specifies the requirements for the network layer, data link layer and physical layer that apply to
configurations involving permanent access to packet switched data network using virtual calls. Identical with and reproduced from
ISO/IEC ISP 10609-9:1992.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 26 pages

AS/NZS 4173:2004 Guide to the safe use of lasers in health care


Provides guidance in the safe use of lasers and laser systems for diagnostic, cosmetic and therapeutic uses in health care facilities
(including hospitals, private medical facilities and dental practices). To this end, it includes explanations of basic laser physics and
radiation/tissue interactions, and also identifies engineering and administrative control measures designed to avoid the most
significant hazards. Protocols to be observed during specialist medical and dental procedures are also included.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 104 pages

NZS/BS 4174:1972 (Withdrawn)

AS/NZS 4179:1997 Single-use sterile surgical rubber gloves - Specification


Specifies requirements for packaged sterile gloves intended for use in surgical procedures to protect the patient and the user from
cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. Does not apply to examination
gloves. It is equivalent to and reproduced from ISO 10282:1994. Appendices contain variations to physical properties and marking
requirements.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4183:1967 (Withdrawn)

AS/NZS 4183:1994 Value management


Specifies guidelines for the application of value management principles in construction, manufacturing and service industries. It
provides users with a value management framework, by defining terms establishing core elements for conducting a value
management study and clarifying roles and responsibilities.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

AS/NZS 4184:- Evaluation and routine testing in medical imaging departments

4184.1:1994 General aspects


Defines test methods to be carried out on equipment and subassemblies of X-ray imaging installations to assess the constancy of
functional performance by means of test instrumentation and test devices that are simple to use. Identical with and reproduced from
IEC 61223-1:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

4184.2:- Constancy tests

4184.2.1:1994 Film processors


Applies to those components of medical X-ray equipment which process radiographic images both on film and by electronic means.
Identical with and reproduced from IEC 61223-2.1:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

4184.2.2:1994 Radiographic cassettes and film changers - Film-screen contact and relative sensitivity of
the screen-cassette assembly
Applies to radiographic cassettes and to film changers equipped with intensifying screens used to record an X-ray pattern on
radiographic film by direct radiography. Identical with and reproduced from IEC 61223-2-2:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages
4184.2.3:1994 Darkroom safelight conditions
Applies to darkrooms in X-ray facilities where the image is processed either on film or by electronic means. Identical with and
reproduced from IEC 61223-2-3:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

4184.2.4:1995 Hard copy cameras


Applies to constancy tests for hard copy cameras producing images on monochrome material such as photographic film or materials
sensitive to infrared radiation. It covers those types of imaging devices used in digital radiography, digital subtraction angiography,
computed tomography, magnetic resonance imaging, ultrasound and nuclear medicine. Identical with and reproduced from IEC
61223-2-4:1994.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

4184.2.5:1995 Image display devices


Applies to image display devices used in diagnostic imaging systems such as digital radiography, digital subtraction angiography,
computed tomography, magnetic resonance imaging, ultrasound and nuclear medicine. Identical with and reproduced from IEC
61223-2-5:1994.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

4184.2.6:1995 X-ray equipment for computed tomography


Applies to those radiological installations with diagnostic X-ray equipment for computed tomography. It is one of a series of
publications intended to assist in the establishment and operation of a quality assurance program in the diagnostic X-ray department.
Identical with and reproduced from IEC 61223-2-6:1994.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

4184.2.7:2002 Equipment for intra-oral dental radiography


Applies to radiological installations with diagnostic X-ray systems designed to expose intra-orally placed image receptors such as
films and photostimulable phosphor sensors. It does not apply to- (a) systems using electronic image receptors such as charge
coupled devices; and (b) diagnostic X-ray systems designed to expose extra-orally placed image receptors such as dental
panoramic equipment and equipment for cephalometric radiography. This Standard modifies, and has been reproduced from, IEC
61223-2-7:1999 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 19 pages

4184.2.9:2002 Equipment for indirect radioscopy and indirect radiography


Applies to those components of X-ray equipment which generate, influence the propagation of, and detect X-radiation, and process,
present and store diagnostic X-ray images in radiological installations with diagnostic X-ray systems for indirect radioscopy and
indirect radiography which use X-ray image intensifiers in conjunction with analogue and/or digital storage systems. This Standard is
identical with, and has been reproduced from, IEC 61223-2-9:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

4184.2.11:2002 Equipment for general direct radiography


Specifies requirements for those components of X-ray equipment which generate, influence the propagation of, and detect X-
radiation, and process, present and store radiographic information in radiological installations with diagnostic X-ray systems using
radiographic film in direct radiography. Does not apply to mammographic, intra-oral, cephalometric and dental panoramic X-ray
equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been reproduced from, IEC
61223-2-11:1999 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

4184.3:- Acceptance tests

4184.3.1:2002 Imaging performance of X-ray equipment for radiographic and radioscopic systems
Specifies requirements for those components of X-ray equipment which influence the image quality and patient dose of diagnostic X-
ray systems using radiographic and radioscopic imaging systems. Does not apply to mammographic, intra-oral, cephalometric and
dental panoramic X-ray equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been
reproduced from, IEC 61223-3-1:1999 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 44 pages

4184.3.2:1998 Imaging performance of mammographic X-ray equipment


Specifies in service testing procedures to ensure that the image quality of radiograms produced by mammographic X-ray equipment
is maintained within required tolerances. This Standard includes an additional local Appendix ZZ, and is based on but not equivalent
to and reproduced from IEC 61223-3-2:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

4184.3.3:1998 Imaging performance of X-ray equipment used for digital subtraction angiography (DSA)
Specifies in-service testing procedures to ensure that the imaging quality of digital subtraction angiography (DSA) systems is
maintained within required tolerances. This Standard is identical with and has been reproduced from IEC 61223-3-3:1996.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

4184.3.4:2002 Imaging performance of dental X-ray equipment


Applies to those components of dental X-ray equipment using radiographic imaging systems which influence the image quality and
patient dose. Also applies to the performance of the acceptance tests on dental X-ray equipment with intra-oral X-ray image
receptor, and to dental film and digital image acquisition on processing. It is identical with, and reproduced from, IEC 61223-3-
4:2000.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 29 pages

AS/NZS 4187:2003 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and
equipment, and maintenance of associated environments in health care facilities
Sets out procedures and process development which can be validated for the cleaning, disinfection and sterilization of reusable
medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities. May be
suitable for application to the instruments and equipment used exclusively on animals in veterinary practice.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 121 pages

AS/NZS 4188:1994 Ultrasonics - Continuous-wave Doppler systems - Test procedures


Describes test methods for measuring the performance of continuous-wave ultrasonic Doppler flowmeters, velocimeters, or foetal
heart detectors. It also describes special Doppler test objects for determining performance properties of Doppler ultrasonic systems.
Identical with and reproduced from IEC 61206:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

AS/NZS 4189:- Information technology - Universal multiple-octet coded Character Set (UCS)

4189.1:1994 Architecture and basic multilingual plane


This Standard is applicable to the representation, transmission, interchange, processing, storage, input and presentation of the
written form of the languages (scripts) of the world, as well as additional symbols. This Part specifies the overall architecture and the
basic multilingual plane of the UCS. Technically identical with and reproduced from ISO/IEC 10646-1:1993.
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 745 pages

AS/NZS 4190:1994 Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic
fields generated by medical ultrasonic equipment using hydrophones in the frequency
range 0.5 MHz to 15 MHz
Provides guidance on the practical measurement of the acoustic output of various types of medical ultrasonic equipment in the
frequency range of 0.5 MHz to 15 MHz based on the use of hydrophones. Identical with and reproduced from ISO/IEC 1220:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

AS/NZS 4192:1994 Illuminated flashing arrow signs


Specifies requirements for the design, construction and performance of signs in the form of an illuminated flashing arrow, for use in
the temporary diversion of vehicular traffic. Provides for three basic types of sign, including those designed for truck or trailer
mounting. Does not cover the use of these signs in specific road situations.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 4193:- (Withdrawn)

AS/NZS 4194:1994 Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic
equipment
Establishes requirements for the declaration of the acoustic output of medical diagnostic equipment for the information of intending
purchasers. Identical with and reproduced from IEC 61157:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

AS/NZS 4196:1999 Information and documentation - Open Systems Interconnection - Interlibrary loan
application service definition
Defines the technical specification of the Application Layer Standard within the Open Systems Interconnection framework of AS/NZS
2777. This Standard defines the services for interlibrary loan. This Standard is identical with and has been reproduced from ISO
10160:1997.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages

AS/NZS 4197:- Information and documentation - Open Systems Interconnection - Interlibrary loan
application protocol specification

4197.1:1999 Protocol specification


Defines the protocol for an ILL application-service element (ASE). The Standard specifies the behaviour which must be exhibited by
the system in order to take part in the provision of ISO interlibrary loan service. This Standard is identical with and has been
reproduced from ISO 10161-1:1997.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 109 pages

4197.2:1999 Protocol implementation conformance statement (PICS) proforma


Defines the technical specifications of the PICS proforma for ILL protocol. This Standard is identical with and has been reproduced
from ISO 10161-2:1997.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 38 pages

AS/NZS 4199:1994 Information processing systems - Open Systems Interconnection - LOTOS - A formal
description technique based on the temporal ordering of observational behaviour
Defines a formal description technique based on the assumption that systems can be described by defining the temporal relation
between events in the externally observable behaviour of the system, thus resulting in a system description that is complete,
consistent, concise, unambiguous and precise. Identical with and reproduced from ISO 8807:1989.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 142 pages

AS/NZS 4200:- Pliable building membranes and underlays

4200.1:1994 Materials
Specifies the requirements for materials suitable for use as a pliable building membrane (also known as underlay) when it is intended
to act as a sarking membrane or thermal insulation, or a vapour barrier in a domestic, commercial or industrial building. It does not
specify the thermal insulation requirements, nor does it include materials for use in air handling ducts.
Reprinted to incorporate Amendment 1:1994
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)

4200.2:1994 Installation requirements


Specifies the installation procedures for a pliable building membrane (also known as underlay) when it is intended to act as a sarking
membrane or thermal insulation, or a vapour barrier in a domestic, commercial or industrial building. It specifies the installation
requirements when the membrane is used under sheet roofing, tile roofing or in walls.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

AS/NZS 4201:- Pliable building membranes and underlays - Methods of test

4201.0:1994 General introduction and list of methods


Specifies a series of test methods for pliable building membranes and underlays for domestic, commercial and industrial
applications.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4201.1:1994 Resistance to dry delamination


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4201.2:1994 Resistance to wet delamination


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4201.3:1994 Shrinkage
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4201.4:1994 Resistance to water penetration


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4201.5:1994 Emittance
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4201.6:1994 Surface water absorbency


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

NZS 4202:1995 Standard method of measurement of building works


Provides a uniform basis for the measurement of buildings works and embodies the essentials of good trade practice for the
presentation of units of measurements in Schedules (Bills) of Quantities.
$94.95+GST (Members), $118.69+GST (Retail), 104 pages

NZS 4203:1992 General structural design and design loadings for buildings
Sets out in limit state format requirements for general structural design and design loadings for buildings, including the supports for
services entering and within buildings, parts of buildings and pedestrian bridges within building sites. Design loadings include those
from dead and live loads, earthquake forces, wind forces, snow loads, rainwater ponding loads, ice loads, soil loads and ground
water loads. Approved electrical safety Standard.
Superseded by all parts of AS/NZS 1170 except Part 4, but remains Current until further notice. Comprises two separate
publications: Volume one: Code of practice, and Volume two: Commentary. Reprinted to append Corrigendum 1:1994
Cited in BIA Approved Documents B1/VM1/VM4, C/AS1 and E2/VM1/AS1
$179.95+GST (Members), $224.94+GST (Retail), 230 pages
Corrigendum: 1 1994

AS/NZS 4203: (Withdrawn)

NZS 4204P:1973 (Superseded by NZS 4229)

NZS 4205P:1973 (Withdrawn)

NZS 4206:1992 Concrete interlocking roofing tiles


Specifies requirements for concrete interlocking roofing tiles of a general type and for their associated accessory tiles. Establishes
minimum standards for fit and finish, for quality of materials used in manufacture and for dimensional requirements related to side lap
and location of fixings, without restricting overall design or size of tiles and accessories. Also specifies requirements for laying and
fixing to specified timber battens.
Cited in BIA Approved Document E2/AS1
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4206:1994 Information technology - Open Systems Interconnection - LOTOS description of the
session protocol
Provides the formal definitions of the OSI basic connection oriented session protocol described by the formal description technique
LOTOS. Identical with and reproduced from ISO/IEC TR 9572:1989.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 86 pages

NZS 4207:1975 Preferred co-ordinating sizes for rigid flat sheet boards used in building
Specifies co-ordinating sizes for the length and width dimensions of rigid flat sheet boards used in building. Identical with and
reproduced from ISO 2777:1974.
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 4207:1994 Information technology - Open Systems Interconnection - LOTOS description of the
session service
Provides the formal definitions of the OSI basic connection oriented session service described by the formal description technique
LOTOS. Identical with and reproduced from ISO/IEC TR 9571:1989.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 47 pages

NZS 4208:1973 (Withdrawn)

AS/NZS 4208:1994 (Withdrawn)

AS/NZS 4209:1994 Information technology - Telecommunications and information exchange between systems
- Definition of the relaying functions of a network layer intermediate system
Defines the abstract operation of the relaying functions of a network entity in an intermediate system as needed to support the OSI
connection-mode network service. Identical with and reproduced from ISO/IEC 10028:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 33 pages

NZS 4210:2001 Masonry construction: Materials and workmanship


Sets out the requirements for the materials and workmanship of clay, concrete and natural stone masonry to be used in conjunction
with NZS 3604, NZS 4229 and NZS 4230 for the construction of masonry buildings and masonry veneers.
Reprinted to append Amendment 1:2002
$84.95+GST (Members), $106.19+GST (Retail), 48 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4210:- Information technology - Telecommunications and information exchange between systems
- Transport conformance testing for connection-mode transport protocol operating over
connection-mode network service

4210.3:1994 Transport test management protocol specification


Provides the structure and encoding of the test management protocol data units used for the transfer of data and control information
from a lower tester to an upper tester. Identical with and reproduced from ISO/IEC 10025-3:1993.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

NZS 4211:2008 Specification for performance of windows


Specifies requirements for the performance of windows to be installed in exterior walls within the wind pressure limitations of the
wind zones defined in table 5 and table 6. The properties covered are strength, stiffness, operating facility, air infiltration, and water
penetration. This Standard specifically excludes skylights or roof windows, interior windows, fixed louvres, the weathertightness of
the window perimeter in the external wall or facade, the fire rating, building facades, and durability.
$69.95+GST (Members), $87.44+GST (Retail), 31 pages

NZMP 4212:1998 Glossary of building terminology


An up-to-date reference book for those actively working in the design and construction of buildings as well as all students in either
trade or professional training. Local terminology and international definitions are included.
$59.95+GST (Members), $74.94+GST (Retail), 232 pages

NZMP 4213:1974 (Withdrawn)

AS/NZS 4213:- Radiotherapy simulators

4213.1:1994 Functional performance characteristics


Provides guidance to manufacturers on the needs of the radiotherapist in respect to the performance of radiotherapy simulators and
guidance to users wishing to check the manufacturer`s declared performance characteristics, to carry out acceptance tests and to
check periodically the performance throughout the life of the equipment. Identical with and reproduced from IEC 61168:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

4213.2:1994 Guidelines for functional performance characteristics


Applies to radiotherapy simulators which use diagnostic X-ray equipment to simulate a radiotherapy radiation beam so that the
treatment volume to be irradiated during radiotherapy can be located and the position and size of the therapeutic radiation field can
be confirmed. Identical with and reproduced from IEC 61170:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 4214:2006 Methods of determining the total thermal resistance of parts of buildings
Provides methods of determining the thermal resistance of building components and elements consisting of thermally homogeneous
layers, in steady-state environmental conditions.
$59.95+GST (Members), $74.94+GST (Retail), 40 pages

NZS 4216:1983 (Withdrawn)

AS/NZS 4216:1994 (Superseded by AS/NZS ISO/IEC 9126.1:2005)

NZS 4217:1980 Pressed metal tile roofs


Defines the quality of the material used in the manufacture of pressed metal roofing tiles and accessories. Applies only to the roofing
and re-roofing of buildings less than 10 m high and not subject to specific design. Describes a suitable means of fixing metal roofing
tiles on new or existing structures.
Cited in BIA Approved Document E2/AS1
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

AS/NZS 4217:1994 Information technology - Telecommunications and information exchange between systems
- Provision of the connection-mode network internal layer service by intermediate systems
using the X.25 packet layer protocol
Defines a method by which a network-layer interworking unit uses the X.25 packet layer protocol to support the OSI connection-
mode network service. Identical with and reproduced from ISO/IEC 10177:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

NZS 4218:2004 Energy efficiency - Small building envelope


Provides details and guidance to meet adequate energy efficiency performance requirements for the building envelope of housing
and small buildings. Incorporates glazing into the schedule and calculation methods of compliance with the required performance
and focuses on excessive heat-loss through the area of glazing. It also brings the window R-values into line with Window Efficiency
Rating Scheme (WERS) and adds an Appendix on glazing performance. It focuses on areas of glazing above 30% of the total wall
area as these significantly affect thermal efficiency of the envelope.
$74.95+GST (Members), $93.69+GST (Retail), 48 pages

AS/NZS 4218:- Information technology - Open Systems Interconnection - Conformance test suite for the
FTAM protocol

4218.1:1994 Test suite structure and test purposes


Provides a specification of a test suite structure and test purposes for the whole of the FTAM protocol. Identical with and reproduced
from ISO/IEC 10170-1:1993.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 108 pages

NZS 4219:1983 Specification for seismic resistance of engineering systems in buildings


Specifies requirements for the design, installation and restraint of engineering systems in buildings. Systems covered include tanks
and vessels, flues and stacks, piping for water, steam, gas and fuel, ducting, heat producing appliances and electrical
communication and control systems.
Reprinted to append Amendments 1 & 2
Cited in BIA Approved Documents B1/VM1, G10/AS1 and G14/VM1
$59.95+GST (Members), $74.94+GST (Retail), 37 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4220:1982 Code of practice for energy conservation in non-residential buildings


Offers guidance to building designers and operating staff on the targets for energy use and conservation for the design and operation
of buildings.
Reprinted to append Erratum 1:1983
$64.95+GST (Members), $81.19+GST (Retail), 30 pages
Erratum: 1 1983

AS/NZS 4220:2003 Bunk beds


Sets out essential safety requirements for bunk beds used in domestic situations, nurseries and institutions, and functional durability,
stability and performance criteria to meet these safety requirements, in order to reduce the likelihood of deaths and injuries.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

NZS 4221:1972 (Withdrawn)

AS/NZS 4221: (Withdrawn)

NZS 4222:1992 (Superseded by AS/NZS 4859.1:2002)

AS/NZS 4222:- Information technology - Open Systems Interconnection - Conformance test suite for the
presentation layer

4222.1:1994 Test suite structure and test purposes for the presentation protocol
Specifies a test suite structure and test purposes for the presentation protocol (excluding X.410 1984 mode). Identical with and
reproduced from ISO/IEC 10729-1:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS 4223:- Code of practice for glazing in buildings

4223.1:2008 Glass selection and glazing


Provides general guidance for designers and specifiers for glass selection and glazing in buildings.
$89.95+GST (Members), $112.44+GST (Retail), 55 pages

NZS 4223, Supplement 1:2008 Supplement 1 to NZS 4223 Part 1:2008 and Part 4:2008
Provides easy to use tables for minimum glass thicknesses calculated for stress at the ultimate limit state wind pressures and for
deflection at serviceability limit state wind pressures. This Supplement is intended as a companion document to NZS 4223, Glazing
in buildings Part 1:2008 and Part 4:2008.
$109.95+GST (Members), $137.44+GST (Retail), 215 pages

Part 3:1999 Human impact safety requirements


Gives minimum requirements for glazing in buildings in locations where it could be subject to human impact, with the intention of
reducing the risk of personal injury.
Reprinted to incorporate Amendment 1:1999.
Cited in BIA Approved Document B1/AS1 & F2/AS1
$49.95+GST (Members), $62.44+GST (Retail), 36 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

4223.4:2008 Wind, dead, snow, and live actions


Provides a methodology for determining the minimum glass thickness for vertical and sloped overhead glazing to resist limit state
actions.
$69.95+GST (Members), $87.44+GST (Retail), 81 pages

AS/NZS 4223:- Information technology - International standardized profile FOD11 - Open document
format: Simple document structure - Character content architecture only

4223.1:1994 Document application profile


Specifies the interchange formats for the transfer of structured documents (character content only) between equipment designed for
word or document processing. Identical with and reproduced from ISO/IEC ISP 10610-1:1993.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 63 pages

NZS 4224:1983 Code of practice for measurement of civil engineering quantities


Sets out the method of measurement for the preparation of quantities for use with civil engineering contracts. Is based on AS 1181
with appropriate NZ amendment.
$64.95+GST (Members), $81.19+GST (Retail), 64 pages

AS/NZS 4224:1994 Information technology - Use of X.25 packet layer protocol to provide the OSI connection-
mode network service over the telephone network
Specifies the mapping of the connection-mode network service primitives and parameters to and from the elements used by the X.25
packet layer protocol when used over the telephone network. Identical with and reproduced from ISO/IEC 10732:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

AS/NZS 4225:- Information technology - Text and office systems - Office document architecture and
interchange format - Technical report on AS 3951 (ISO 8613) implementation testing

4225.1:1994 Testing methodology


Defines a testing methodology and provides a framework for specifying abstract test cases for implementation testing, so providing a
base for testing the interworking capability of ODA implementations. Identical with and reproduced from ISO/IEC TR 10183-1:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

AS/NZS 4227:1994 Information technology - Information resource dictionary system services interface
Specifies a services interface that gives any program full access to all information resource dictionary system services through
whatever external call interface is provided by the language in which the program is written. Identical with and reproduced from
ISO/IEC 10728:1993.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 108 pages
AS/NZS 4228:1994 Information technology - Telecommunications and information exchange between systems
- Standard group medium access control addresses
Describes the binary and illustrative representation of the medium access control addresses as used by LANs conforming to AS/NZS
4802 (ISO/IEC 8802). Identical with and reproduced from ISO/IEC TR 10735:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 4229:1999 Concrete masonry buildings not requiring specific engineering design
Sets down the structural requirements for buildings not requiring specific design, where the foundations of some or all of the walls, in
any storey are constructed of masonry, and the floors, ceilings and roof are constructed of light timber frame, with the exception that
the ground floor can be a concrete slab-on-ground.
Reprinted to incorporate Amendment 1:1999
Cited in BIA Approved Documents B1/AS1/AS3, E1/AS1 and G13/AS2
$159.95+GST (Members), $199.94+GST (Retail), 200 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4229:- Information technology - International standardized profile TAnnnn - Connection-mode


transport service over connectionless-mode network service

4229.1:1994 General overview and subnetwork-independent requirements


Specifies a combination of OSI Standards which collectively provide the connection-mode transport service using the
connectionless-mode network service. Identical with and reproduced from ISO/IEC ISP 10608-1:1992.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

4229.2:1994 TA51 profile including subnetwork-dependent requirements for CSMA/CD local area
networks
Specifies subnetwork-type dependent requirements for end system operation when the end system is attached to a CSMA/CD local
area network. Identical with and reproduced from ISO/IEC ISP 10608-2:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4229.5:1994 TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-


switched data networks using virtual calls
Specifies subnetwork-type dependent requirements for end system operation when the end system is attached to a X.25 packet-
switched data network by a dedicated access line and using switched virtual calls. Identical with and reproduced from ISO/IEC ISP
10608-5:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 4230:2004 Design of reinforced concrete masonry structures


Provides up to date information for the design of reinforced concrete masonry structures. This revision recognizes the predominant
use of reinforced concrete masonry for structural applications in NZ, and incorporates research findings specifically pertaining to the
performance of reinforced and prestressed concrete masonry.
Reprinted to incorporate Amendment 1:2006
$199.95+GST (Members), $249.94+GST (Retail), 158 pages
Amendment 1, 2006 $34.95+GST (Members), $43.69+GST (Retail)

AS/NZS 4230:- Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s

4230.1:1994 Systems
Specifies the system layer of the coding (sometimes known as MPEG 1) developed to support the video and audio methods defined
in Parts 1 and 2 of this Standard. Identical with and reproduced from ISO/IEC 11172-1:1993.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 53 pages

4230.2:1994 Video
Specifies the coding and decoding representation (sometimes known as MPEG 1) of video for digital storage media. Identical with
and reproduced from ISO/IEC 11172-2:1993.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 112 pages

4230.3:1994 Audio
Specifies the coding and decoding representation (sometimes known as MPEG 1) of high quality audio for storage media. Identical
with and reproduced from ISO/IEC 11172-3:1993.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 150 pages

4230.4:1997 Compliance testing


Specifies procedures to determine characteristics of coded bitstreams and to test compliance of bitstreams and decoders with the
requirements specified in Parts 1, 2 and 3 of AS/NZS 4230. Identical with and reproduced from ISO/IEC 11172-4:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 42 pages

4230.5:1999 Software simulation


Provides a C language software simulation of an encoder and decoder for AS/NZS 4230.1, AS/NZS 4230.2 and AS/NZS 4230.3.
This Standard is identical with and has been reproduced from ISO/IEC TR 11172-5:1998.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 13 pages

NZS 4231:1985 (Withdrawn)

AS/NZS 4231:1994 Information technology - Telecommunications and information exchange between systems
- Elements of management information related to OSI network layer standards
Specifies the management information within an open system related to operations of the OSI network layer. Identical with and
reproduced from ISO/IEC 10733:1993.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 130 pages

NZS 4232:- Performance criteria for fire resisting enclosures

Part 1:1988 (Superseded by AS/NZS 1905.1:1997)

Part 2:1988 Fire resisting glazing systems


Specifies the range of performance requirements which are to be provided when the term fire window is used. Provides a means of
compliance with the requirements for the design, manufacture and installation for all fire windows. Referenced in BIA Approved
Documents C2 and F3.
Cited in Dangerous Goods (Class 3 - Flammable Liquids) Regulations 1985 and BIA Approved Documents C/AS1 & F3/AS1
$34.95+GST (Members), $43.69+GST (Retail), 36 pages

AS/NZS 4232:1994 Information technology - Use of X.25 packet layer protocol in conjunction with X.21/X.21bis
to provide the OSI connection-mode network service
Specifies the mapping of the OSI connection-mode network service primitives and parameters to and from the elements of the
protocols used by X.25 and X.21. Identical with and reproduced from ISO/IEC 10588:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

AS/NZS 4233:- High pressure water (hydro) jetting systems

4233.1:1999 Guidelines for safe operation and maintenance


Provides guidance on the various issues which need to be addressed when high pressure water jetting operations are performed.
The Standard also provides recommendations for the elimination or reduction of hazards and risk associated with high pressure
water jetting operations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

4233.2:1999 Construction and performance


Proposes minimum requirements for the construction and performance of high pressure water jetting systems and associated
equipment and componentry.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

NZS 4234:1988 (Superseded by NZS/AS 2908)

AS/NZS 4234:2008 Heated water systems - Calculation of energy consumption


Sets out a method of evaluating the annual energy performance of heated water systems using a combination of test results for
component performance and a mathematical model to determine an annual load cycle task performance.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 60 pages

NZS 4235:1988 Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation
within the cavity in walls of buildings
Specifies the property requirements of the components and the production parameters of urea-formaldehyde foam systems for
injection into wall cavities of existing buildings to provide improved thermal insulation. Identical to BS 5617:1985 with modifications
for New Zealand.
Reprinted to append Amendment A:1988
Adopted Standard
$193.94+GST (Members), $242.43+GST (Retail), 16 pages
Amendment A, 1988 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4235.1-1972 (Withdrawn)

SNZ HB4236:2002 Masonry veneer wall cladding


This Standards New Zealand Handbook sets out guidelines and requirements for masonry veneer exterior cladding in New Zealand.
$44.95+GST (Members), $56.19+GST (Retail), 40 pages

AS/NZS 4236:1994 Respiratory therapy equipment - Jet nebulizers and jet nebulizer air pumps
Specifies performance and safety requirements for jet nebulizers and associated portable air pumps used in respiratory drug
therapy. Appendices include methods for determining minimum aerosol output, residual volume, minimum fill volume and
performance at normal orientation and at maximum angle of tilt of the jet nebulizer, determination of particle size and non-spill
volume.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 4237:1994 Respiratory therapy equipment - Peak expiratory flow meters


Sets out requirements for simple mechanical, electro-mechanical, and electrical portable hand-held peak expiratory flow meters for
self-monitoring of peak expiratory flow rate. Appendices include methods for determining accuracy and repeatability of flow meter
output, effects of ageing and back pressure at constant flow.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 4238:1991 Code of practice for fire safety in atrium buildings


Deals with the special features and precautions to be incorporated in the design of a multi-storey building having an internal
courtyard under a space (atrium) which extends upwards for several floors but is not open at the top. The object is to ensure safety
of life in the event of a fire in any area which opens on to the atrium space. The Code is supplementary to the basic building code fire
protection requirements. It deals with the protection of escape routes, detection and extraction of smoke, use of sprinkler systems,
warning systems, emergency electricity supply and other requirements according to type of occupancy.
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 4238:1996 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Circuit-mode multi-rate bearer services - Service
description, functional capabilities and information flows
Specifies service description and control aspects of the multi-rate circuit-mode basic services which may be supported by a private
integrated service network (PISN). It is one of a series of Standards applicable to PISN. Identical with and reproduced from ISO/IEC
11584:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

NZS 4239:1993 Automatic sliding door assemblies


Specifies minimum performance requirements for materials and components of automatic sliding doors and door assemblies.
Information is provided on operational safety and durability for ingress and egress traffic when assembled, installed and
commissioned. Doors are classified according to hourly operating cycles. Control systems are described for both normal and
emergency conditions including positioning and operation of pressure mats, photo-electric and radiant energy detectors as well as
detection zone dimensions. An Appendix introduces recommended operational inspection procedures and frequency. Amendment
A facilitates the use of AS 4085-1992 in New Zealand, particularly for compliance with the New Zealand Building Code (NZBC).
Identical to AS 4085-1992 with modifications for New Zealand.
Reprinted to append Amendment A:1993
Cited in BIA Handbook/CS13
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 20 pages
Amendment A, 1993 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4239:1996 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Generic functional protocol for the support of
supplementary services - Inter-exchange signalling procedures and protocol
Defines the signalling protocol for the control of supplementary services and additional network features (ANFs) at the Q reference
point in private integrated services networks (PISNs). It is one of a series of standards applicable to PISN. Identical with and
reproduced from ISO/IEC 11582:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 80 pages

AS/NZS 4240:1994 Remote controls for mining equipment


Provides guidance for the design, construction and general safeguarding of remote control systems for mining equipment. Guidance
for training of personnel as well as maintenance and safe operation of control systems are also included. This Standard is applicable
to both the coal and metalliferous mining industries.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

NZS 4241:1999 Public toilets


Provides design information and advice on the numbers, location, type and quality including features and fittings for public toilets in
any location. Guidance on cleaning and sanitation is also provided. Toilet facilities composed of all-gender, single, fully enclosed,
self-contained units are proposed. Traditional separate gender facilities are also covered.
$189.95+GST (Members), $237.44+GST (Retail), 88 pages

NZS 4242:1995 Headstones and cemetery monuments


This Standard specifies minimum structural design criteria, performance and renovation requirements for cemetery monuments and
crematoria memorial gardens above and below the natural ground surface. It does not set out to preclude artistic endeavours.
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

NZS 4243 Energy efficiency - Large buildings

4243.1:2007 Building thermal envelope


Specifies performance requirements for large buildings to achieve an adequate level of energy efficiency in respect of their building
envelope. The requirements for lighting have been updated and placed in a separate Standard (NZS 4243 Part 2).
$54.95+GST (Members), $68.69+GST (Retail), 34 pages

4243.2:2007 Lighting
Specifies performance requirements for large buildings to achieve an adequate level of energy efficiency in respect of lighting.
$54.95+GST (Members), $68.69+GST (Retail), 20 pages

AS/NZS 4244:1994 Information technology - Telecommunications and information exchange between systems
- 26-pole interface connector mateability dimensions and contact number assignments
Specifies the 26-pole connector, including dimensions and assignments to be used when the functional characteristics of the
interface conform with V.24 and the electrical characteristics conform with V.10, V.11 or V.28. Identical with and reproduced from
ISO/IEC 11569:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

SNZ PAS 4244:2003 Insulation of lightweight-framed and solid-timber houses


Provides guidance on the selection of insulation levels and window options to improve the energy efficiency of houses beyond the
minimum required by the New Zealand Building Code. The PAS also identifies the insulation levels required by NZS 4218 to meet
the minimum requirements of the New Zealand Building Code.
$49.95+GST (Members), $62.44+GST (Retail), 44 pages

AS/NZS 4245:1994 Information technology - Telecommunications and information exchange between systems
- Open Systems Interconnection - Transport protocol identification mechanism
Provides a protocol identification procedure that will allow transport entities to be implemented which can support both OSI and non-
OSI protocols above the OSI network layer. Identical with and reproduced from ISO/IEC 11570:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

NZS 4246:2006 Energy efficiency - Installing insulation in residential buildings


Provides guidance to insulation installers in order to help achieve the design thermal performance and thermal durability of building
elements, as well as minimizing the risk to installers.
$84.95+GST (Members), $106.19+GST (Retail), 52 pages

AS/NZS 4246:- Information technology - International standardized profile FOD26 - Open document
format: Enhanced document structure - Character, raster graphics and geometric graphics
content architectures

4246.1:1994 Document application profile


Specifies the interchange formats (character, raster and geometric graphics) for the transfer of enhanced structured documents
between equipment designed for word or document processing. Identical to and reproduced from ISO/IEC ISP 11181-1:1993.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 133 pages

AS/NZS 4247:- Information technology - International standardized profile FOD36 - Open document
format: Extended document structure - Character, raster graphics and geometric graphics
content architectures

4247.1:1994 Document application profile


Specifies the interchange formats (character, raster and geometric graphics) for the transfer of extended structured documents
between equipment designed for word or document processing. Identical with and reproduced from ISO/IEC ISP 11182-1:1993.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 242 pages

AS/NZS 4248:- Information technology - International standardized profiles AOM1n OSI management -
Management communications

4248.1:1994 Specification of ACSE, presentation and session protocols for the use by ROSE and CMISE
Specifies the association control service element, presentation layer and the session layer standards that shall be used to provide
the required upper layer functions for the common management information service element and the remote operation service
element functions. Identical with and reproduced from ISO/IEC ISP 11183-1:1992.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 39 pages

4248.2:1994 CMISE/ROSE for AOM12 - Enhanced management communications


Specifies how the common management information service element (CMISE) combined with the remote operations service element
(ROS) shall be used to provide a complete set of operation and notification services to the CMISE-service-users of two end systems.
Identical with and reproduced from ISO/IECISP 11183-2:1992.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 101 pages

4248.3:1994 CMISE/ROSE for AOM11 - Basic management communications


Specifies how the common management information service element (CMISE) combined with the remote operation service element
(ROS) shall be used to provide a basic subset of operation and notification services to the CMISE-service-users of two end systems.
Identical with and reproduced from ISO/IEC ISP 11183-3:1992.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 79 pages

AS/NZS 4249:1994 Electrical safety practices - Film, video and television sites
Specifies the requirements for safe working practices in the use of electrical equipment on film, video and television sites and the in-
service testing of the equipment. It does not apply to theatre stages, concert locations or permanent television studios.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 4251:1974 Code of practice for solid plastering


Deals with interior and exterior solid plastering. Contains recommendations on types of backgrounds and guidance on the
preparation of surfaces to be plastered. Also specifies suitable plastering systems and methods of application.
Reprinted incorporating Amendments 1 & 2. Superseded (in part) by NZS 4251.1:1998
$44.95+GST (Members), $56.19+GST (Retail), 32 pages
Amendment 1, $34.95+GST (Members), $43.69+GST (Retail)
Amendment 2, $29.95+GST (Members), $37.44+GST (Retail)

NZS 4251:- Solid plastering

4251.1:2007 Cement plasters for walls, ceilings and soffits


Sets out the requirements for solid plaster, and stucco over a drained and vented cavity with a rigid or non-rigid backing in buildings,
to achieve structurally sound, hard, durable and water resistant surfaces. This revision has introduced the requirement of cavity
behind the plaster and applies to exterior and interior walls where impact loads are limited to soft body impacts associated with
domestic use.
$94.95+GST (Members), $118.69+GST (Retail), 69 pages

AS/NZS 4251:- Electromagnetic compatibility - Generic emission standard

4251.1:1999 Residential, commercial and light industry


Specifies limits and test methods for electrical and electronic equipment intended for use in residential, commercial and light
industrial environments (excluding equipment used to radiate electromagnetic energy for radio communication purposes) for which
no dedicated product or product family emission standard exists. The Standard is one of a series of standards applicable to
electromagnetic compatibility. This Standard is identical with and has been reproduced from CISPR 61000-6-3:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

4251.2:1999 Industrial environments


Specifies emission requirements applying to electrical and electronic apparatus intended for use in the industrial locations (both
indoor and outdoor, or in proximity to industrial power installations) for which no dedicated product or product-family emission
Standard exists. Disturbances in the frequency range 0 Hz to 200 GHz are covered. The Standard is one of a series of Standards
applicable to electromagnetic compatibility. This Standard is identical with and has been reproduced from IEC 61000-6-4:1997.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

AS/NZS 4252.1:1994 (Superseded by AS/NZS 61000.6.1:2006)

AS/NZS 4253:1994 Mailboxes


Specifies the requirements for the design, construction and performance of mailboxes in both commercial and residential
applications. It is intended for use by regulatory authorities and all persons concerned with the manufacture, installation,
maintenance and general requirements of mailboxes.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages
NZS/BS 4255:- Rubber used in preformed gaskets for weather exclusion from buildings

Part 1:1986 Specification for non-cellular gaskets


Specifies requirements for the classification, physical properties and marking of solid (non-cellular) rubber used in preformed gaskets
for sealing applications in buildings where resistance to weathering, ozone and permanent deformation under load are of prime
importance. Applies to chloroprene, butyl, halobutyl, ethylene propylene, chlorosulphonated polyethylene and silicone rubbers used
in the gaskets. Five classes of material, defined according to the hardness of the rubber, are specified.
Adopted Standard
$90.91+GST (Members), $113.64+GST (Retail), 8 pages

AS/NZS 4255:- Security seals

4255.1:1994 Classification
Provides guidance for the selection of security seals for specific applications based on classifications which indicate security
category, grade, type and class. Test methods to determine the seal class are included.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

4255.2:1994 Use
Provides guidance for the effective use of security seals including control procedures.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 4256:- Plastic roof and wall cladding materials

4256.1:1994 General requirements


Specifies general requirements for general purpose coated and uncoated, transparent, translucent and opaque sheets of flat,
corrugated and other geometrical configurations intended for roof and wall cladding applications.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4256.2:1994 Unplasticized polyvinyl chloride (uPVC) building sheets


Specifies requirements for transparent, translucent and opaque, uncoated and coated uPVC sheets that are formed into profiles and
are primarily intended for use as a roof cladding sheet. In certain circumstances, the same material may be used as a wall cladding
sheet.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4256.3:1994 Glass fibre reinforced polyester (GRP)


Specifies requirements for general purpose translucent and opaque glass fibre reinforced polyester sheets of flat, corrugated and
other geometrical configurations intended for roof and wall cladding materials.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4256.4:1995 Unplasticized polyvinyl chloride (uPVC) wall cladding boards


Specifies requirements for uncoated, opaque, uPVC sheets extruded and formed into profiles for use with accessories as external
wall cladding.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4256.5:1996 Polycarbonate
Specifies requirements for transparent, translucent and opaque polycarbonate sheeting intended for use as roof or wall cladding.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

AS/NZS 4257:- Plastic roof and wall cladding materials - Methods of test

4257.0:1994 General introduction and list of methods


Specifies a series of test methods for general purpose coated and uncoated, transparent, translucent and opaque sheets of flat,
corrugated and other geometrical configurations intended for roof and wall cladding applications.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4257.1:1994 Determination of dimensional properties


Reprinted to append Amendment 1:1995
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

4257.2:1994 Determination of dimensional stability at 60 degrees C


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4257.3:1994 Determination of mass per unit area of sheet


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4257.4:1994 Determination of diffuse light transmission


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4257.5:1994 Determination of glass fibre content


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4257.6:1994 Determination of impact resistance


Reprinted to append Amendment 1:1995
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

4257.7:1994 Determination of colourfastness, light transmission and impact resistance following


ultraviolet light exposure
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4257.8:1994 Determination of residual styrene


Identical with and reproduced from ISO 4901:1985.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4257.9:1995 Determination of transverse bending stiffness


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4257.10:1997 Determination of surface distortion (oil canning)


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 4258:1994 Software user documentation process


Specifies the process for creating all forms of user documentation for software. These include printed documents (e.g. user manuals
and reference cards), on-line documentation and help text. The Standard does not specifically address embedded systems, training
materials or policy manuals.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

AS/NZS 4261:1994 Reusable containers for the collection of sharp items used in human and animal medical
applications
Sets out requirements for reusable containers intended for the safe collection and transport of sharp items used in human and
animal applications. Appendices include methods for determining handle integrity, impact resistance, integrity of the closure device
and leakage, and resistance to penetration.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4263:2003 Interactive voice response systems - User interface - Dual tone multi frequency (DTMF)
signalling
This Standard specifies requirements for the design of the user interface in interactive voice response (IVR) telephone systems
where the user input to the system is signalled by dual tone multi frequency (DTMF) tones.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

AS/NZS 4266:- Reconstituted wood-based panels - Methods of test

4266.0:2004 General introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.1:2004 Sampling, cutting, and conditioning of test pieces


Specifies methods for the sampling, cutting, and conditioning of test pieces of reconstituted wood-based panels. This Standard does
not cover the sampling and cutting of test pieces for the derivation of characteristic values for structural design. These tests have to
be carried out on medium-sized test pieces.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4266.2:2004 Dimensions, squareness, flatness and edge straightness of whole panel


Specifies methods for measuring thickness, width, length, squareness, straightness and flatness of reconstituted wood-based
panels. It applies to full size panels.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.3:2004 Moisture content


Specifies a method for determining the moisture content of reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.4:2004 Density
Specifies a method for determining the density of test pieces of reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4266.5:2004 Modulus of elasticity in bending and bending strength


Specifies a method of determining the apparent modulus of elasticity and bending strength (modulus of rupture) of reconstituted
wood-based panels in flat-wise bending.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4266.6:2004 Tensile strength perpendicular to the plane of the panel (internal bond strength)
Specifies a method for determining the resistance to tension perpendicular to the plane of the panel, i.e., internal bond strength of
reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4266.7:2004 Surface soundness


Specifies a method for assessing the surface soundness of coated and uncoated reconstituted wood-based panels. NOTE: This
Standard does not cover the grid-patterned face of hardboards.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

4266.8:2004 Swelling in thickness after immersion in water


Specifies a method for determining the swelling in thickness of reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
4266.9:2003 Thickness stability and glue bond quality
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 8 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4266.10:2004 Wet bending strength after immersion in water at 70 oC or boiling temperature


Specifies three methods for determining the bending strength of particleboards and fibreboards after immersion in hot water, as
follows: (a) Method A Immersion in water at 70 degrees C for 2 h. (b) Method B Immersion in water at boiling temperature for 2 h. (c)
Method C Immersion in water at boiling temperature for 72 h.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.11:2004 Moisture resistance under cyclic test conditions


Specifies a method for determining the moisture resistance of reconstituted wood-based panels under cyclic test conditions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.12:2003 Surface water absorption


Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 4 pages

4266.13:2004 Resistance to axial withdrawal of screws


Specifies a method for determining the resistance of particleboards and fibreboards, of thickness 15 mm and greater, to axial
withdrawal of screws.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.14:2004 Dimensional changes associated with changes in relative humidity


Specifies a method for determining dimensional changes in reconstituted wood-based panels, due to climatic variations.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.15:1995 (Withdrawn as the content has been incorporated into AS/NZS 4266.16:2004)

4266.16:2004 Formaldehyde emission - Desiccator method


Specifies a method for determining the quantity of formaldehyde emitted from particleboards and fibreboards.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4266.17:1995 (Withdrawn)

4266.18:1995 Determination of efficacy of fungicide treatment


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.19:2004 Assessing appearance of melamine overlaid panels


Sets out a method for assessing the appearance of melamine-overlaid boards or panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4266.20:2004 Resistance to surface abrasion (Taber abrasion test)


Specifies a method for determining the resistance to surface abrasion of decorative surfaces by using the Taber abrader. It is
applicable to all low pressure overlaid reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.21:2004 Over-cure or under-cure of resin


Assesses the degree of cure or hardness of the laminated surface. It is applicable to all low pressure overlaid reconstituted wood-
based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.22:2004 Porosity of laminated surface


Specifies a method for determining the porosity of the laminated surface. It is applicable to all low pressure overlaid reconstituted
wood-based panels.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4266.23:2004 Resistance to steam


Sets out a method for assessing the permeability of the decorative surface to steam. It is applicable to all low pressure overlaid
reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.24:2004 Resistance to cracking


Sets out a method for determining the resistance to cracking of melamine overlaid reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.25:2004 Resistance to staining


Sets out a method for assessing the resistance of decorative surfaces to staining by common household materials. It is applicable to
all low-pressure melamine overlaid reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.26:2004 Resistance to dry heat


Sets out a method for determining the resistance of laminated panels to dry heat. It is intended to determine the suitability of
decorative laminated sheets for use in kitchens where contact with moderate hot cooking utensils is to be expected.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.27:2004 Resistance to impact


Sets out a method for determining the impact resistance of decorative overlaid panels.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4266.28:2004 Bond strength PVC films


Sets out a method for determining the bond strength of PVC films overlaid onto reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.29:2004 Heat resistance of PVC films


Sets out a method for determining the heat resistance of PVC films overlaid on reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.30:2004 Moisture resistance of finished foils


Sets out a method for determining the effect of moisture on the panel surface. It is applicable to reconstituted wood-based panels
overlaid with a PVC film or a finished foil.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4266.31:2004 Adhesion of paper foils by the crosscut test


Sets out a method for measuring the adhesion of decorative paper foils to wood-based panel substrates. It is applicable to
reconstituted wood-based panels overlaid with a decorative paper foil.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.32:2004 Veneer bond strength


Sets out a method for determining veneer bond strength. It is applicable to reconstituted wood-based panels overlaid with natural or
reconstituted wood veneers.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.33:2004 Veneer bond durability


Sets out a method for determining durability of veneer bonds. It is applicable to reconstituted wood-based panels overlaid with
natural or reconstituted wood veneers.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4266.34:2004 Surface absorption


Specifies a method for determining the surface absorption of reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4266.35:2004 Dimensions of test pieces


Specifies methods for measuring the thickness, length and width of test pieces of reconstituted wood-based panels.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4268:2008 Radio equipment and systems - Short range devices - Limits and methods of measurement
Provides the minimum performance and methods of measurement for short range devices placed on the Australian market in
accordance with the LIPD and Radio-controlled Models Class Licences, or short range devices placed on the New Zealand market in
accordance with the General User Radio Licence. Test methods are generally referenced from various ETSI SRD standards and
other sources.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 36 pages

AS/NZS 4270:- Geographic information systems - Spatial data transfer standard

4270.1:1995 Logical specifications


Specifies a structure and content for spatially referenced data in order to facilitate data transfer between dissimilar spatial database
systems. This Standard is based on and has been reproduced from Part 1 of US Federal Information Processing Standards
Publication FIPS PUB 173.1-1992.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 215 pages

4270.2:1995 Spatial features


Specifies the US classification and definitions of entities and attributes for the spatial features identified in a data transfer. Its use
within Australia and New Zealand is restricted to data transfers with systems complying with the US version of Spatial Data Transfer
Standard entities and attributes. This Standard is based on and has been reproduced from Part 2 of US Federal Information
Processing Standards Publication FIPS PUB 173.2-1992.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 63 pages

4270.3:1995 ISO 8211 encoding


Provides a representation of a Spatial Standard file set in a standardized method enabling the file set to be exported to or imported
from different media by general purpose software complying ISO 8211. This Standard is based on and has been reproduced from
Part 3 of US Federal Information Processing Standards Publication FIPS PUB 173.3-1992.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 49 pages

4270.4:1998 Topological vector profile


Provides a limited subset to the specifications for data transfer contained in AS/NZS 4270, Parts 1 to 3. The topological vector
profile supports only geographic vector data with geometry and topology. Includes an Appendix which provides variations for
Australia and New Zealand. This standard is technically equivalent to and has been reproduced from FIPS PUB 173-1B-1994.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 45 pages

AS/NZS 4271.1(Int):2000 (Withdrawn)


AS/NZS 4272:2001 Shorthand reporters' tests
Sets out a method for the design, conduct, assessment and certification tests for shorthand reporters in court, parliamentary and
other fields, which require accurate transcription of the spoken word with minimal delay. The tests cover shorthand speed, English
language and general knowledge.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

AS/NZS 4273(Int):1995 (Interim Standard, expired 5 February 1999. Use AS 4273-1999)

AS/NZS 4274:1995 X-ray tube assemblies for medical diagnosis - Characteristics of focal spots
Describes measuring methods and requirements for test arrangements to be applied to the focal spots in diagnostic X-ray tube
assemblies for medical use. Identical with and reproduced from IEC 60336: 1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

AS/NZS 4275:- Methods of testing underground marking tape

4275.0:1995 General introduction and list of methods


Proposes standard methods of testing for underground marking tapes. Includes test methods for elongation at break, tear resistance,
impact resistance, chemical resistance, background discolouration and adhesion of print.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4275.1:1995 Elongation at break


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4275.2:1995 Tear resistance


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4275.3:1995 Impact resistance


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4275.4:1995 Chemical resistance


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4275.5:1995 Background discolouration


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4275.6:1995 Adhesion of print


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 4276:- Water microbiology

4276.1:2007 General information and procedures


Presents guidance for carrying out manipulations which are common to each technique for the microbiological examination of water,
particularly the preparation of samples, culture media and apparatus. It also describes the various enumeration techniques available
and the criteria for the choice of a particular technique. Mainly intended for bacteria, yeasts and moulds. Some aspects are also
applicable to viruses and parasites. Adopted from ISO 8199:2005 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

4276.3:- Method 3: Heterotrophic colony count methods

4276.3.1:2007 Method 3.1: Pour plate method using yeast extract agar
Specifies the method for the enumeration of culturable microorganisms in water by counting the colonies formed in a yeast extract
agar medium. Identical to ISO 6222:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 8 pages

4276.3.2:2003 Method 3.2: Plate count of water containing biocides


This Standard sets out a method for estimating the number of colony-forming units (CFUs) in water using a pour plate technique and
R2A Agar. For waters which may contain growth-inhibiting additives which have not been neutralized, plate counts starting with the
1:100 dilution are recommended in order to eliminate interference with counts. This increases the lower detection limit of the method
to 100 cfu/mL. This limit is generally adequate for applications such as the monitoring of cooling tower water.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

4276.5:2007 Method 5: Coliforms - Membrane filtration method


Extends the applicability of the membrane filtration method when used with samples containing different levels of competing non-
target bacterial flora.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

4276.6:2007 Method 6: Coliforms, Escherichia coli and thermotolerant coliforms - Determination of


most probable number (MPN)
Combines the most probable number method for coliforms with that of thermotolerant coliforms and Escherichia coli to form a single
method.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 16 pages

4276.7:2007 Method 7: Escherichia coli and thermotolerant Coliforms - Membrane filtration method
Extends the applicability of the membrane filtration method when used with water samples containing different levels of competing
non-target bacteria flora.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 12 pages

4276.9:2007 Method 9: Enterococci - Membrane filtration method


Specifies a method for the detection and enumeration of intestinal enterococci in water by membrane filtration. Intestinal enterococci
are defined by Clause 3.1 of the Standard method. Slanetz and Bartley medium is also known as m-Enterococcus medium. Adopted
from ISO 7899.2:2000 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 16 pages

AS/NZS 4276.13:2008 Method 13: Pseudomonas aeruginosa - Membrane filtration method


Sets out a method, using membrane filtration, for enumerating Pseudomonas aeruginosa in waters.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

4276.15:1999 Method 15: Examination for Vibrio cholerae


Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

4276.16:1999 Method 16: Bactericidal efficiency of water disinfecting tablets


Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

4276.17:- Method 17: Spores of sulfite-reducing anaerobes (clostridia) including Clostridium


perfringens

4276.17.1:2000 Method 17.1: Membrane filtration method


Sets out a method for enumerating spores of sulfite-reducing clostridia and C.perfringens in water, using membrane filtration, with a
confirmation procedure for identifying C.perfringens.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

4276.17.2:2000 Method 17.2: Estimation of most probable number (MPN) using the multiple tube dilution
technique
Sets out a method for determining the most probable number (MPN) of spores of sulfite-reducing anaerobes (clostridia) including
C.perfringens in water, using a multiple tube dilution technique, with a confirmation procedure for identifying C.perfringens.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

4276.18:2001 Method 18: Aeromonas by membrane filtration including selected speciation


Sets out method, using membrane filtration, for enumerating Aeromonas spp., A. hydrophila, A. veronii biotype veronii, A. veronii
biotype sobria, A. jandeii, A. caviae and A. schubertii in water in general. A flow diagram of the procedure is shown in Appendix A.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

4276.19:2001 Method 19: Examination for thermophilic Campylobacter spp. - Membrane filtration
Method for detecting thermophilic Campylobacters in water using culture in enrichment broth and on selective agar media. A flow
diagram of the procedure is shown in Appendix A.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

4276.20:2003 Method 20: Examination for coagulase positive staphylococci, including Staphylococcus
aureus, by membrane filtration
This Standard sets out a method for detecting coagulase positive staphylococci and Staphylococcus aureus (S.aureus) in water by
the membrane filtration method which is suitable for enumerating microorganisms only when the turbidity of the water is low.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

4276.22:2007 Method 22: Packaged water - Coliform bacteria and Escherichia coli - Membrane filtration
method
Establishes a reference method for the detection and enumeration of coliform and Escherichia coli bacteria in water that has been
bottled or packaged in any way for human consumption. Adopted from ISO 9308.1:2000 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

AS/NZS 4277:1995 Text telecommunications - User interface requirements - For deaf people and people with
hearing and speech disabilities
Specifies requirements for the design of the user interface for textphones for communicating with deaf people and people with
hearing and speech disabilities.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4278:1984 (Withdrawn)

AS/NZS 4279(Int):1995 (Superseded by AS/NZS 23950:1999)

AS/NZS 4280:- 406 MHz satellite distress beacons

4280.1:2003 Marine emergency position-indicating radio beacons (EPIRBs)


Provides manufacturers, suppliers and testing facilities of 406 MHz satellite distress beacons with the minimum radiofrequency and
environmental requirements and associated test methods to enable design and confirmation of compliance with Australia and New
Zealand radio frequency spectrum and maritime regulatory requirements. Based on IEC 61097-2:2002 with modifications for New
Zealand and Australia.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2006
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 54 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4280.2:2003 Personal locator beacons (PLBs)


Provides equipment designers, manufacturers, suppliers and testing facilities of 406 MHz satellite distress beacons, when employed
as Personal Locator Beacons, with both the minimum radiofrequency and environmental requirements and associated test methods,
to enable design and confirmation of compliance with Australia and New Zealand radiofrequency spectrum and maritime regulatory
requirements.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4281:2007 Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and
between 30 and 41 MHz frequency bands
Specifies the minimum standards and essential requirements for the operation of the radiocommunication aspects of this equipment.
This Standard does not address the requirements necessary for connecting this equipment to the Public Switched Telephone
Network (PSTN), the equipment requirements it must meet for doing so, or user safety requirements.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 4284:2008 Testing of building facades


Sets out methods of testing building facades for environmental loading including water penetration and air infiltration as well as
structural tests. Optional tests include seismic testing, seal degradation and building maintenance unit (BMU) restraint.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 31 pages

AS/NZS 4286:1995 Single-service cloth towels


Specifies constructional, performance and servicing requirements for cloth towels which are dispensed for single use from a
dispenser machine. Does not include requirements for the dispenser machine.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 4287:1995 Child carrier seats for pedal bicycles - Safety requirements
Specifies safety requirements for child carrier seats which may be attached to a bicycle other than a child`s bicycle for the purpose of
transporting as a passenger, a child having a body weight of not greater than 22 kg.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 4290:1995 (Withdrawn)

AS/NZS 4291:- Mechanical properties of fasteners

4291.1:1995 (Withdrawn)

4291.2:1995 Nuts with specified proof load values - Coarse thread


Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9,10 and 12 with
ISO metric coarse pitch threads and diameters up to and including 39 mm. The property class system is explained and test methods
for determination of mechanical properties are given. Identical with and reproduced from ISO 898-2:1992.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

4291.5:1995 (Withdrawn: Use AS 4291.5:2000)

AS/NZS 4293:1995 International lamp coding system (ILCOS)


Specifies a general system of coding of lamps. Identical with and reproduced from IEC 61231:1993.
Superseded by AS/NZS 61231:2001
Joint Australian/New Zealand Standard
$32.00+GST (Members), $40.00+GST (Retail), 21 pages

AS/NZS 4295:2004 Analogue speech (angle modulated) equipment operating in land mobile and fixed services
bands in the frequency range 29.7 MHz to 1 GHz
Specifies the essential operational and marking requirements and required radiofrequency characteristics for operation within the
Australian and New Zealand radiofrequency spectrum arrangements.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 25 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4296:1995 Cable trunking systems


Specifies requirements for both metal and non-metal trunking and fittings to accommodate, protect and if required segregate cables
in an electrical installation. Tests cover material requirements, cover retention, electrical characteristics and mechanical properties.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

NZS 4297:1998 Engineering design of earth buildings


Provides for the structural and durability design of unfired earthen wall buildings. The scope is limited to adobe, pressed brick,
poured earth and rammed earth and which contain clay and silt and which rely on the clay and silt particles present to achieve
satisfactory performance with or without chemical stabilization. Such materials shall comply with NZS 4298 "Materials and
Workmanship for Earth Buildings".
Cited in BIA Approved Document B1/VM1 & B2/AS1
$89.95+GST (Members), $112.44+GST (Retail), 56 pages

NZS 4298:1998 Materials and workmanship for earth buildings


Sets out requirements for the materials and workmanship requirements for the use of unfired earth in the form of adobe, pressed
earth brick, rammed earth or poured earth. It applies to buildings which are designed in accordance with NZS 4297 "Engineering
Design of Earth Buildings" and NZS 4299 "Earth Buildings Not Requiring Specific Design". This Standard provides a means of
compliance with the materials and workmanship requirements of earth walled structures. Test methods for earth building materials
and criteria for acceptable results are included.
Reprinted to incorporate Amendment 1:2000
$109.95+GST (Members), $137.44+GST (Retail), 82 pages
Amendment 1, 2000 $24.95+GST (Members), $31.19+GST (Retail)

NZS 4299:1998 Earth buildings not requiring specific design


Sets down construction requirements for earth walled buildings not requiring specific engineering design. Many drawings of
construction details which have been proved in New Zealand are included to help builders in earth to achieve durable and
weatherproof buildings. To be used in conjunction with NZS 4298 "Materials and Workmanship for Earth Buildings".
Reprinted to incorporate Amendment 1:2000
Cited in BIA Approved Document B1/AS1, B2/AS1 & E2/AS1
$119.95+GST (Members), $149.94+GST (Retail), 121 pages
Amendment 1, 2000 $24.95+GST (Members), $31.19+GST (Retail)

NZS 4301:- Intruder alarm systems

Part 1:1993 (Superseded by AS/NZS 2201.1:2007)

Part 3:1993 Detection devices for internal use


Specifies requirements for the performance of detection devices intended for use in intruder alarm systems. Identical to AS 2201.3-
1991 with modifications for New Zealand.
Reprinted to append Amendment A:1993
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 30 pages
Amendment A, 1993 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4302:1987 Code of practice for the control of hygiene in air and water systems in buildings
Provides guidance to building and building services designers and operating staff responsible for running the services of a building in
relation to the control of hygiene in its air and water systems. Main emphasis on large industrial, commercial and residential
accommodation buildings that contain large numbers of people and have air conditioning and extensive water systems. Sets
principles of design, installation, operation and maintenance which will assist in reducing the likelihood of outbreaks of infectious
diseases originating from air and water systems.
Reprinted to append Amendment 1:1991
Cited in BIA Handbook/CS9 and Approved Document G4/AS1
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 1991 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4303:1990 Ventilation for acceptable indoor air quality


Specifies minimum ventilation rates and indoor air quality that will be acceptable to human occupants and intended to avoid adverse
health effects. Applies to all indoor or enclosed spaces that people may occupy, except where other applicable Standards and
requirements dictate larger amounts of ventilation than this Standard. Release of moisture in residential kitchens, bathrooms, locker
rooms, and swimming pools is included in the scope of this Standard. Based on but not equivalent to ASHRAE 62:1989.
Cited in BIA Approved Document G4/AS1
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

NZS 4304:2002 Management of Healthcare Waste


Provides guidelines for the disposal of human and animal healthcare waste, including generators, waste transporters and waste
disposal facilities. It outlines procedures for the classification, segregation, packaging/containment, labelling, storage, transport and
disposal of healthcare waste.
$59.95+GST (Members), $74.94+GST (Retail), 44 pages

NZS 4305:1996 Energy efficiency - Domestic type hot water systems


Sets out minimum energy efficiency requirements in terms of heat losses from domestic type hot water systems. It applies to all
domestic type hot water systems irrespective of the energy source, and covers systems that may be found in residential, industrial
and commercial buildings, but excludes systems used exclusively for space heating, cooling or for processes. The requirements are
based on a practical and economic analysis of insulation costs and energy savings.
Cited in BIA Approved Document H1/AS1
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 4306:2005 Residential property inspection


Introduces consistency and reliability into the inspection of residential properties. Sets out the minimum requirements for the visual
inspection of residential buildings, and for the preparation of the appropriate property inspection reports.
$119.95+GST (Members), $149.94+GST (Retail), 40 pages

NZS 4306 Certificates:2005 Residential property inspection certificates


Pads of 40 certificates of inspection in accordance with NZS 4306:2005.
$49.95+GST (Members), $62.44+GST (Retail), 40 pages

AS/NZS 4308:2008 Procedures for specimen collection and the detection and quantitation of drugs of abuse in
urine
Ensures that the detection of drugs in urine meets the expectations for testing of specimens for medico-legal, workplace or court-
directed purposes. Addresses appropriate procedures for the collection of urine, on-site screening, handling and dispatch of
specimens to the laboratory for screening and confirmatory tests.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 40 pages

NZS/BS 4320:1968 (Withdrawn)

AS/NZS 4323 Stationary source emmissions

4323.3:2001 Determination of odour concentration by dynamic olfactometry


Specifies a method for the measurement of odour concentration of pure substances, defined and undefined mixtures of gaseous
odorants in air or nitrogen using dynamic olfactometry with a panel of human assessors being the sensors.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 55 pages

AS/NZS 4323.4:2009 Area source sampling - Flux chamber technique


Provides parties interested in the sampling and monitoring of stationary source emissions with a flux chamber sampling technique for
the determination of atmospheric contaminant emission rates from area sources, in particular, the determination of odour and
hazardous air pollutants.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 4325:- Compression and mechanical connectors for power cables with copper or aluminium
conductors

4325.1:1995 Test methods and requirements


Provides test methods and requirements for two broad classes of connectors suitable for copper conductors of 10 mm2 and greater,
and aluminium conductors of 16 mm2 and greater. Class A connectors are intended for circuits which can be subjected to short
circuits of relatively high duration and intensity. Class B connectors are intended for situations in which overloads or short circuits are
restricted by protective devices. Technically equivalent to and reproduced from IEC 61238-1:1993.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications


Specifies requirements for metal banded flexible couplings used in low-pressure pipeline systems that convey water, waste water or
stormwater. Acceptance criteria for defined imperfections are given for sleeves and adaptor bushes. It includes appendices which set
out test methods.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

AS/NZS 4328:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Path
replacement additional network feature
Specifies the signalling protocol for the support of the path replacement additional network feature at the Q reference point between
private integrated services network exchanges connected together within a private integrated services network. The Q reference
point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking.
Identical to and reproduced from ISO/IEC 13874:1995.
Reprinted to incorporate Corrigendum 1:1997
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages
Corrigendum: 1 1997

AS/NZS 4329:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Name
identification supplementary services
Specifies the signalling protocol for the support of calling and connected name identification supplementary services at the Q
reference point between private integrated services network exchanges connected together within a private integrated services
network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated
services networking. Identical to and reproduced from ISO/IEC 13868:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4330:2006 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including
personal EPIRBs
Provides the essential requirements for 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBS) including
personal EPIRBS, this Standard includes both environmental and operational requirements and radio-frequency requirements for
marine and aviation application beacons. The requirements are made up of specifications, and the methods of test for verification of
those specifications, which are based on COSPAS-SARSAT and International Maritime Organization requirements.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 24 pages

AS/NZS 4331:- Metallic flanges


4331.1:1995 Steel flanges
Specifies international requirements for circular steel flanges in nominal pressure designations, PN 10 to PN 420. Types of steel
flanges, their facings, dimensions, tolerances, threading, bolt sizes, flange face surface finish, marking, testing and inspection are
specified. Guidance on pressure/temperature ratings for flanges of nominated materials are given in an Annex. Identical to and
reproduced from ISO 7005.1:1992.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 79 pages

4331.2:1995 Cast iron flanges


Specifies international requirements for circular grey, malleable and ductile cast iron flanges in nominal pressure designations, PN
2.5 to PN 50. Types of flanges, their facings, dimensions, tolerances, bolt sizes, surface finish of faces, marking, testing, inspection
and materials together with associated pressure/temperature ratings are specified. Identical to and reproduced from ISO
7005.2:1988.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

4331.3:1995 Copper alloy and composite flanges


Specifies international requirements for circular copper alloy and composite flanges in nominal pressure designations, PN 10 to PN
50. Types of flanges, their facings, dimensions, tolerances, bolt sizes, flange face surface finish, marking, testing, inspection and
materials are specified. Pressure/temperature ratings for flanges of nominated alloys are given. Identical to and reproduced from
ISO 7005.3:1988.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

NZS 4332:1997 Non-domestic passenger and goods lifts


Specifies requirements for the design, construction, operation and testing of passenger carrying lifts including goods lifts with car
controls and not including lifts in single unit dwellings. It applies to new building work being either the installation of a new lift or new
work associated with an existing installation.
Cited in BIA Handbook/CS 8/1 and Approved Documents D2/AS1 and F6/AS1
$94.95+GST (Members), $118.69+GST (Retail), 159 pages

AS/NZS 4334:1995 Graphic symbols for use on medical electrical equipment


Provides a comprehensive listing of symbols for use on medical electrical equipment for both safety and identification purposes.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 49 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4335:1987 Glossary of terms used in project network techniques


Presents in a structured form terms, definitions and symbols used in project network techniques. Appendices have been included to
form an interface with other related disciplines.
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages

NZS/ISO 4335:1987 (Superseded by AS/NZS 2571)

AS/NZS 4335:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Path replacement additional network feature
Specifies the path replacement additional network feature applicable to various basic services supported by private integrated
services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 3863:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4336:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Name identification supplementary services
Specifies supplementary services for calling and connected name identification applicable to various basic services supported by
private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards
applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC
3864:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

AS/NZS 4337:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call transfer supplementary service
Specifies the call transfer between three users and is applicable to various basic services supported by private integrated services
networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated
services networking. Identical to and reproduced from ISO/IEC 13865:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 43 pages

AS/NZS 4338:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call completion supplementary services
Specifies the call completion features applicable to various basic services supported by private integrated services networks. The
basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 3866:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 68 pages

AS/NZS 4339:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call transfer
supplementary service
Specifies the signalling protocol for the support of the call transfer supplementary service at the Q reference point between private
integrated services network exchanges connected together within a private integrated services network exchanges connected
together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of
Standards applicable to private integrated services networking. Identical to and reproduced from ISO/IEC 13869:1995.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 60 pages

AS/NZS 4340:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call completion
supplementary services
Specifies the signalling protocol for the support of the call completion supplementary service at the Q reference point between
private integrated services network exchanges connected together within a private integrated services network. The Q reference
point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking.
Identical to and reproduced from ISO/IEC 13870:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 68 pages

AS/NZS 4341:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call diversion supplementary services
Specifies the call diversion features applicable to various basic services supported by private integrated services networks. The
basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 13872:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 80 pages

AS/NZS 4342:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call diversion
supplementary services
Specifies the signalling protocol for the support of call diversion supplementary services at the Q reference point between private
integrated services network exchanges connected together within a private integrated services network. The Q reference point is
defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard
is identical with and has been reproduced from ISO/IEC 13873:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 71 pages

AS/NZS 4344:2001 Motor vehicles - Cargo restraint systems - Transport chain and components
Specifies requirements for chain or associated components used in the transport industry for developing a cargo restraining system
and sets out a method for determining the strength of transport chain and its components.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 4345:2001 Motor vehicles - Cargo restraint systems - Transport fibre rope
Specifies requirements for rope made from synthetic textile fibre, for use in restraining cargo on vehicles.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 4346:1995 Guide to the installation in vehicles of mobile communication equipment intended for
connection to a cellular mobile telecommunication service (CMTS)
Provides guidance for the safe and efficient installation of communication equipment such as mobile cellular telephones and mobile
data equipment in vehicles. Does not cover temporary installations or installations in marine and aeronautical environments Many of
the requirements can also be applied to the installation of land mobile radio equipment.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4347:- Damp-proof courses and flashings - Methods of test

4347.0:1995 General introduction, list of methods and test specimen requirements


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.1:1995 Determination of water permeability


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.2:1995 Determination of continuity of coating on metal centres


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.3:1995 Determination of pliability of bitumen coating on metal centres


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4347.4:1995 Determination of pliability - Materials with fabric or felt base


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4347.5:1995 Determination of compression properties


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.6:1995 Determining impact resistance (falling dart impact test)


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

4347.7:1995 Determination of thickness of bitumen coating and thickness or mass of metallic centre
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.8:1995 Preparation of coating bitumen for testing


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4347.9:1995 Determining thickness


Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

4347.10:1995 Determination of mass of desaturated base and percentage saturation


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4348:1995 Water supply - Domestic type water treatment appliances - Performance requirements
Specifies requirements for the testing of appliances for chemical reduction, microbiological treatment, and odour and chlorine
reduction.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

AS/NZS 4352:1995 (Withdrawn)

AS/NZS 4353:1995 Portable fire extinguishers - Aerosol type


Specifies requirements for portable stored-pressure fire extinguishers for household use, designed for one use only, not to be refilled
and to be discarded after any use.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 4354:1995 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing
performance
Specifies methods for identifying the most important characteristics of radionuclide calibrators and the relevant associated test
methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. Identical to and
reproduced from IEC 61303:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 13 pages

AS/NZS 4355:2006 Radiocommunications equipment used in the handphone and citizen band radio services
operating at frequencies not exceeding 30 MHz
Specifies the essential requirements and minimum standards for radiocommunications equipment intended to operate in the
handphone and citizen band radio services at frequencies not exceeding 30 MHz.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 4356:- Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers

4356.1:1996 Determination of the entrance field size


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the entrance field size of the intensifier. Identical to and reproduced from IEC 61262-1:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4356.2:1996 Determination of the conversion factor


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the conversion factor of the intensifier. Identical to and reproduced from IEC 61262-2:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4356.3:1996 Determination of the luminance distribution and luminance non-uniformity


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the luminance distribution and luminance non-uniformity of the intensifier. Identical to and reproduced from IEC
61262-3:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4356.4:1996 Determination of the image distortion


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the image distortion of the intensifier. Identical to and reproduced from IEC 61262-4:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

4356.5:1996 Determination of the detective quantum efficiency


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the detective quantum efficiency of the intensifier. Identical to and reproduced from IEC 61262-5:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

4356.6:1996 Determination of the contrast ratio and veiling glare index


Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the contrast ratio and veiling glare index of the intensifier. Identical to and reproduced from IEC 61262-6:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4356.7:1996 Determination of the modulation transfer function


Describes a method of determining the modulation transfer functions of X-ray image intensifiers.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 4357 Structural laminated veneer lumber

4357.0:2005 Specifications
Specifies requirements for the manufacture, structural characterization, and structural verification of laminated veneer lumber
intended for structural applications, and sets out dimensional tolerances, moisture content, veneer and bond quality, and structural
properties to be determined for structural LVL. Also specifies requirements for formaldehyde emission.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

4357.1:2005 Method of test for measurement of dimensions and shape


To provide a test method for measurement of dimensions and shape for structural laminated veneer lumber (LVL). This Standard
was originally Method 10 of the AS/NZS 2098 series, and is now part of the AS/NZS 4357 series.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

4357.2:2006 Determination of structural properties - Test methods


Specifies test methods for the determination of structural properties of structural laminated veneer lumber (LVL).
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4357.3:2006 Determination of structural properties - Evaluation methods


Specifies evaluation methods for the determination of structural properties of structural laminated veneer lumber (LVL).
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

4357.4:2005 Determination of formaldehyde emissions


Specifies a method for the determination of formaldehyde emissions from plywood. This test method is based upon the Japanese
Agricultural Standard (JAS) method specified in MAFF Notification No. 233 but has been adapted to suit products commonly
manufactured and sold in Australian and New Zealand.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
AS/NZS 4358:1996 Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of
characteristics
Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test
methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. Identical to and
reproduced from IEC 61267:1994.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

SNZ HB 4360:2000 Risk management for Local Government


Provides guidelines for the implementation of a risk management programme within the organizational and functional units
comprising a Local Authority in New Zealand and is applicable to Territorial Authorities, Regional Councils and Unitary Authorities.
The elements for the risk management process, defined in AS/NZS 4360, are applied to the activities within a Local Authority. These
activities have been divided into seven broad categories: governance, legal compliance, business risks, built assets, human
resources, information systems and financial risk management.
Reprinted to append Amendment 1:2001
$84.95+GST (Members), $106.19+GST (Retail), 52 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4360:1990 (Withdrawn)

AS/NZS 4360:2004 Risk management


Provides a generic guide for managing risk. This standard may be applied to a very wide range of activities, decisions or operations
of any public, private or community enterprise, group or individual. While the Standard has very broad applicability, risk
management processes are commonly applied by organizations or groups and so, for convenience, the term "organization" has been
used throughout this Standard.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 28 pages

AS/NZS 4364:1996 Adhesives, phenolic and aminoplastic, for load-bearing timber structures: Classification
and performance requirements
Establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-
bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the
manufacture of load-bearing timber structures only. The performance requirements of this standard apply to the adhesive only, not
to the structure. Based on and technically equivalent to BS EN 301:1992, BS EN 302 Parts 1 to 4:1992.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4364(Int):2007 Timber - Bond performance of structural adhesives


Provides requirements for bond performance of adhesives formed in structural finger-jointed timber and glulam products. It is largely
based on the Canadian Standards Association document CSA O112.9, Evaluation of adhesives for structural wood products
(exterior exposure).
Interim Standard - expires on 31 July 2009 when it will replace AS/NZS 4364:1996. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS 4365:2002 Radiocommunications equipment used in the UHF citizen band radio service
Specifies essential requirements and minimum standards for radiocommunications equipment intended to operate in the citizen band
radio service in Australia and New Zealand, on the UHF band.
Reprinted to incorporate Amendment 1:2007 and Amendment 2:2008
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS 4366:1996 Information technology - Software packages - Quality requirements and testing
Specifies quality requirements for software packages and instructions on how to test a software package against these requirements.
The Standard particularly applies to third party testing and deals with software packages as offered and delivered. It does not deal
with production processes. Identical to and reproduced from ISO/IEC 12119:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 4370:1996 Restraint of children with disabilities in motor vehicles


Sets out options for restraining children with disabilities while they are travelling in motor vehicles. Provides guidelines for prescribers
to determine how a child will be restrained while travelling. Includes some design requirements for restraining devices.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4371:1996 Ceramic tableware


Specifies performance requirements for ceramic tableware which particularly relate to public health, including minimum requirements
for the release of lead and cadmium.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4374:1996 Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance
requirements and methods of measurement and reporting
Specifies a series of tests and the terminology for reporting these tests, to be carried out by manufacturers, enabling them to declare
the characteristics of Doppler foetal heartbeat detectors on a common basis, thus allowing the purchaser to compare the
performance of various models and chose that one which is best suited to their requirements. Identical to and reproduced from IEC
61266:1994.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4375:1996 User-applied labels for use on syringes containing drugs used during anaesthesia
Sets out the requirements for labels which the user attaches to drug-filled syringes so that the contents can be identified just before
use during anaesthesia. Size, colour and pattern of the label and the typographic characteristics of the wording are dealt with.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4376:1996 (Superseded by AS/NZS 61000.4.15:2005)

NZS/BS 4377:1991 (Withdrawn)

AS/NZS 4377:1996 (Superseded by AS/NZS 61000.4.15:2005)

AS/NZS 4378:1996 Characteristics and test conditions of radionuclide imaging devices - Anger type gamma
cameras
Specifies a series of tests, and the terminology for reporting these tests, to be carried out by manufacturers and which enables them
to declare the characteristics of gamma cameras on a common basis, thus allowing purchasers to compare the performance of
various models and choose that one which is best suited to their requirements. Identical to and reproduced from IEC 60789:1992.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 4379:- Information technology - Open Systems Interconnection - Remote database access
4379.1:1996 Generic model, service and protocol
Specifies a remote database access service in terms of the database server and the database processing services with respect to
the remote database access client. Identical to and reproduced from ISO/IEC 9579-1:1993.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 161 pages

4379.2:1996 SQL specialization


Specifies a remote database access service in terms of the database server and the database processing services, with respect to
the remote database access client, when database language used is SQL. Identical to and reproduced from ISO/IEC 9579-2:1993.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 59 pages

AS/NZS 4380:2001 Motor vehicles - Cargo restraint systems - Transport webbing and components
Specifies requirements for webbing restraint systems for use in the transport industry.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 4382:1996 Preparation of function charts for control systems


Provides rules and symbols for the preparation of descriptions of the function and behaviour of control systems by establishing an
implementation-independent graphical representation. Provides a general process approach to describing control functions and may
be applied to non-electrical systems. Method of representation is an industrial application of `Petri nets`. Identical to and reproduced
from IEC 60848:1988 including Corrigendum 1990.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 48 pages

AS/NZS 4383:- Preparation of documents used in electrotechnology

4383.1:1996 General requirements


Provides general rules and guidelines for the preparation of documents used in electrotechnology. Contains a classification of
documents, documentation principles, including the structure of documents, and general drawing rules on formats, layout, graphical
symbols and simplification techniques. Numerous illustrative examples are provided. Identical to and reproduced from IEC 61082-
1:1991 and Amendment 1:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 93 pages

4383.2:1996 Function-oriented diagrams


Covers the layout and presentation of function-oriented diagrams, such as overview, function and circuit diagrams, which are used to
highlight the functioning of a system and its circuitry. Provides rules for the layout of the diagrams, choice of symbols and different
forms of representation. Includes systems for non-electrical circuits and processes. Contains numerous illustrations. Identical to and
reproduced from IEC 61082-2:1993.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 76 pages

4383.3:1996 Connection diagrams, tables and lists


Provides rules for connection diagrams which are used when assembling, installing or maintaining equipment. Numerous illustrations
are provided. Identical to and reproduced from IEC 61082-3:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

4383.4:1998 Location and installation documents


Provides rules for location and installation documents mainly used for installation work. It covers different systems and objects such
as arrangement or installation drawings for site, buildings and equipment, installation diagrams for site or buildings, and drawings for
location on or in components. This Standard is identical with and has been reproduced from IEC 61082-4:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

AS/NZS 4384:1997 Motor vehicles - Anchorages and anchor points for securing internal cargo
Specifies requirements for anchorages for use in securing cargo vehicles where the occupants share the same interior space as the
cargo.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

AS/NZS 4385:1996 Infants' rocking cradles - Safety requirements


Specifies material, construction and design requirements, as well as labelling and marking requirements for rocking cradles all
related to safety of the infant within the cradle.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 15 pages

AS/NZS 4386:- Domestic kitchen assemblies

4386.1:1996 Kitchen units


Specifies the minimum requirements for the construction, durability, safety, ergonomics, strength, coordination of services and
choice of components of fitted kitchen assemblies for use in domestic applications. This Standard is also applicable to small offices,
holiday apartments, units and similar non-commercial applications. It is designed for use by manufacturers, builders, consumers,
specifiers and regulatory authorities.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages

4386.2:1996 Installation
Specifies the minimum requirements for the installation of fitted kitchen assemblies for use in domestic applications, whether
delivered in pre-assembled or in flat-pack form. This Standard is also applicable to small offices, holiday apartments, units and
similar non-commercial applications. It is designed for use by installers, manufacturers, builders, consumers, specifiers and
regulatory authorities alike.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4387:- Domestic kitchen assemblies - Methods of test

4387.0:1996 Introduction, list of methods and general requirements


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.1:1996 Determination of strength of carcass and underframe


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4387.2:1996 Determination of shelf deflection


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4387.3:1996 Determination of strength of shelf supports


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.4:1996 Determination of the strength of worktops and bottom surfaces


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.5:1996 Determination of strength of hinged doors


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.6:1996 Determination of slam open of hinged doors


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.7:1996 Determination of slam shut of hinged doors


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.8:1996 Determination of wear and fatigue of hinged doors


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.9:1996 Determination of resistance to downward static load on drawers and other runner-
supported items
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.10:1996 Determination of slam open of drawers


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4387.11:1996 Determination of slam shut of drawers


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4387.12:1996 Determination of retention of the bottom surface of drawers


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.13:1996 Determination of wear and fatigue of drawers, sliding shelves and runners
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4387.14:1996 Determination of strength of handles


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4387.15:1996 Determination of the strength of support frames for wall attachment devices
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4387.16:1996 Determination of calibration of drawer slamming apparatus


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 4389:1996 Safety mesh


Specifies the minimum requirements for the design, construction, testing and installation of safety mesh for use in domestic,
commercial and industrial building applications.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

AS/NZS 4391(Int):1996 (Interim Standard expired)

AS/NZS 4394:1996 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical
diagnosis
Defines the most common operating characteristics of rotating anode X-ray tubes, during and after energization, to facilitate
comparison between these devices. Identical to and reproduced from IEC 60613:1989.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS/BS 4395: (Withdrawn)

AS/NZS 4395:- Information technology - Keyboard layouts for text and office systems

4395.1:1996 General principles governing keyboard layouts


Specifies the spacing and physical characteristics of keys and the principles governing the placement of characters and symbols
used on numeric, alphanumeric and composite keyboards. Identical to and reproduced from ISO/IEC 9995-1:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages
4395.2:1996 Alphanumeric section
Specifies the alphanumeric section of a keyboard, the arrangement, the location and the number of the keys in the alphanumeric
zone. Identical to and reproduced from ISO/IEC 9995-2:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4395.3:1996 Complementary layouts of the alphanumeric zone of the alphanumeric section


Specifies a set of graphic characters which, when used in combination with an existing national version keyboard layout, allows the
input of the full graphic character repertoire defined in AS 2793. Identical to and reproduced from ISO/IEC 9995-3:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4395.4:1996 Numeric section


Specifies the numeric section, the arrangement, the number and the location of the keys in the various zones of the section.
Identical to and reproduced from ISO/IEC 9995-4:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4395.5:1996 Editing section


Specifies the editing section, the cursor zone and the allocation of functions to its keys. Identical to and reproduced from ISO/IEC
9995-5:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

4395.6:1996 Function section


Specifies the function section of the keyboard and the allocation of functions to the keys. Identical to and reproduced from ISO/IEC
9995-6:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4395.7:1996 Symbols used to represent functions


Specifies the symbols used for functions found in any type of keyboard. Identical to and reproduced from ISO/IEC 9995-7:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

4395.8:1996 Allocation of letters to the keys of a numeric keypad


Specifies the allocation of letters to the numeric zone and is intended for keyboards where letters instead of digits are used for
mnemonic retention of numeric information. Identical to and reproduced from ISO/IEC 9995-8:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4396:1999 Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
Specifies requirements for the construction and performance of insulation piercing connectors between 0.6/1 kV aerial bundled
cables and insulated branch cables. Tests of performance requirements are provided.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

AS/NZS 4399:1996 Sun protective clothing - Evaluation and classification


This Standard sets out requirements for determining the rated ultraviolet protection factor of sun protective textiles, garments and
other items of personal apparel (such as hats) which are worn in close proximity to the skin. It also specifies appropriate detailed
labelling requirements. It does not cover sunscreen products for topical application to the human skin, fabrics for architectural or
horticultural use such as shadecloth, or sunglasses. It does not cover items which offer protection at a distance from the skin, such
as umbrellas or shade structures, or protection from ultraviolet radiation sources other than the sun.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside
buildings - Polyethylene (PE)
Specifies the requirements for solid-wall polyethylene (PE) pipes and fittings for soil and waste discharge (low and high temperature)
inside buildings, as well as the system itself. It does not include buried pipework.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

NZS 4402:- Methods of testing soils for civil engineering purposes

Part 1:1986 Preliminary and general


Covers soil testing for engineering purposes. Establishes definitions and symbols, test equipment, soil grouping, preparation of
samples for testing and the use of test results in calculations.
Looseleaf. Parts available separately or together in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 17 pages

Supplement 1:1988 Methods of testing soils for civil engineering purposes - Supplementary tests - November
1988
Additional tests to Parts 4 and 6.
$49.95+GST (Members), $62.44+GST (Retail), 38 pages

Part 2:- Soil classification tests

Part 2, Section 1:1986 Test 2.1 Determination of the water content


Covers the determination of the water content of a soil as a percentage of its dry mass. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 2, Section 2:1986 Test 2.2 Determination of the liquid limit


Covers the determination of the liquid limit of a soil which has not been dried below natural water content. The method may also be
used on previously dried soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
Cited in BIA Approved Document B1/Definitions
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

Part 2, Section 3:1986 Test 2.3 Determination of the plastic limit


Covers the determination of the plastic limit of a soil which has not been dried below natural water content. The method may also be
used on previously dried soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 2, Section 4:1986 Test 2.4 Determination of the plasticity index


Covers the determination of the plasticity index of a soil. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 2, Section 5:1986 Test 2.5 Determination of the cone penetration limit
Covers the determination of the cone penetration limit of a soil which has not been dried below natural water content. The method
may also be used on previously dried soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 2, Section 6:1986 Test 2.6 Determination of the linear shrinkage


Covers the determination of the linear shrinkage of a soil. The test may also be used on samples of soil in their natural state. To be
read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
Cited in BIA Approved Document B1/Definitions
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

Part 2, Section 7:- Determination of the solid density of soil particles

Part 2, Section 7.1:1986 Test 2.7.1 Method for coarse, medium and fine soils
Covers the determination of the solid density of soil particles. It is not suitable for soils containing stones retained on a 37.5 mm test
sieve unless such stones are broken down to less than this size. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 2, Section 7.2:1986 Test 2.7.2 Method for medium and fine soils
Covers the determination of the solid density of soil particles of medium and fine soils. Any stones retained on a 20 mm test sieve
must be broken down to less than this size. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 2, Section 8:- Determination of the particle-size distribution

Part 2, Section 8.1:1986 Test 2.8.1 Standard method by wet sieving


Covers the quantitative determination of the particle size distribution in a soil down to the fine s and size by wet sieving. To be read
in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

Part 2, Section 8.2:1986 Test 2.8.2 Subsidiary method by dry sieving


Covers the quantitative determination of the particle-size distribution in a soil down to the fine s and size by dry sieving. The method
should not be used unless it has been shown that for the type of material under test it gives the same results as the method of
analysis by wet sieving. In case of doubt, Test 2.8.1 should be used. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 2, Section 8.3:1986 Test 2.8.3 Standard method for fine soils (pipette method)
Covers the quantitative determination of the particle-size distribution in a soil from the coarse sand size down. This test is not
normally carried out if less than 10 percent of the material passes the 63 micron test sieve, as measured in Test 2.8.1. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

Part 2, Section 8.4:1986 Test 2.8.4 Subsidiary method for fine soils (hydrometer method)
Covers the quantitative determination of the particle-size distribution in a soil from the coarse sand size down. This test is not
normally carried out if less than 10 percent of the material passes the 63 micron test sieve as measured in Test 2.8.1. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

Part 3:- Soil chemical tests

Part 3, Section 1:- Determination of the organic matter content

Part 3, Section 1.1:1986 Test 3.1.1 Standard method by titration


Covers the determination of the percentage by mass of organic matter present in a soil by titration. To be read in conjunction with
Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 1.2:1986 Test 3.1.2 Subsidiary method by ignition


Covers the determination of the percentage by mass of organic matter present in a soil by loss on ignition. To be read in conjunction
with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

Part 3, Section 2:1986 Test 3.2 Determination of the total sulphate content
Describes a procedure for determining the acid soluble sulphate content of natural soil which includes all naturally occurring
sulphates apart from negligible rarities. The results obtained give the sulphate content at the time of sampling only as the sulphate
content is subject to seasonal fluctuations. The method can also be used for the determination of the sulphate content of 1 : 1 soil :
water extract, or the sulphate content of groundwater. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 3:- Determination of the pH value

Part 3, Section 3.1:1986 Test 3.3.1 Standard method (electrometric)


Covers the electrometric determination of the pH value of a soil suspension. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
Part 3, Section 3.2:1986 Test 3.3.2 Subsidiary method (colorimetric)
Covers a colorimetric determination of soil pH. Intended primarily as a rapid field method. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 1 page

Part 3, Section 4:1986 Test 3.4 Detection of presence of allophane in soils


Covers a simple field test to detect the presence of allophane in soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 1 page

Part 4:- Soil compaction tests

Part 4, Section 1:- Determination of the dry density/water content relationship

Part 4, Section 1.1:1986 Test 4.1.1 New Zealand standard compaction test
Covers the determination of the dry density when the soil passing a 19.0 mm test sieve is compacted in a specified manner, over a
range of water contents, including that which gives the maximum dry density. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 4, Section 1.2:1986 Test 4.1.2 New Zealand heavy compaction test
Covers the determination of dry density when the soil passing a 19.0 mm test sieve is compacted in a specified manner, over a
range of water contents, including that which gives the maximum dry density. Compactive effort is greater than in Test 4.1.1. To be
read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 4, Section 1.3:1986 Test 4.1.3 New Zealand vibrating hammer compaction test
Covers the determination of the dry density when the soil passing a 37.5 mm test sieve is compacted by an electrically operated
vibrating hammer compactor, over a range of water contents, including that which gives the maximum dry density. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

Part 4, Section 2:- Determination of the minimum and maximum dry densities and relative density of a
cohesionless soil

Part 4, Section 2.1:1988 Test 4.2.1 Minimum dry density


Provides a standard technique for the laboratory determination of the minimum dry density of a cohesionless soil.
Included in Supplement 1; not available separately
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 4, Section 2.2:1988 Test 4.2.2 Maximum dry density


Provides a standard technique for the laboratory determination of the maximum dry density of a cohesionless soil by vibratory
compaction of a fully saturated sample.
Included in Supplement 1; not available separately
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 4, Section 2.3:1988 Test 4.2.3 Relative density


Determines the relative density of a soil with respect to the loosest and densest states at which it can be placed by the laboratory
techniques specified.
Included in Supplement 1; not available separately
Cited in BIA Approved Document B1/VM4
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

Part 5:- Soil density tests

Part 5, Section 1:- Determination of the density of soil

Part 5, Section 1.1:1986 Test 5.1.1 Sand replacement method for the determination of in situ density
Covers the determination in situ of the density of undisturbed or compacted soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

Part 5, Section 1.2:1986 Test 5.1.2 Balloon densometer method for the determination of the in situ density
Covers the determination in situ of the density of fine, medium and some coarse soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

Part 5, Section 1.3:1986 Test 5.1.3 Sampling tube method for the determination of the in situ density
Covers the determination in situ of the density of undisturbed or compacted fine cohesive soils into which a sampling tube may easily
be driven. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 5, Section 1.4:1986 Test 5.1.4 Immersion in water method


Covers the determination of the density of natural or compacted soils, using Archimedes` principle. The method can be employed
wherever lumps of material of suitable size can be obtained and handled without disturbance. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 5, Section 1.5:1986 Test 5.1.5 Water displacement method


Covers the determination of the density of natural or compacted soil by measuring its mass and water displacement. The method
can be employed wherever lumps of material of suitable size can be obtained and handled without disturbance. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 6:- Soil strength tests

Part 6, Section 1:- Determination of the California Bearing Ratio (CBR)

Part 6, Section 1.1:1986 Test 6.1.1 Standard laboratory method for remoulded specimens
Covers the determination of the CBR of a soil when compacted and tested in a laboratory. Applicable to fine, medium, and the
fraction of coarse soils passing a 19.0 mm test sieve. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

Part 6, Section 1.2:1986 Test 6.1.2 Standard laboratory method for undisturbed specimens
Covers the laboratory determination of the CBR of an undisturbed sample of soil. Applicable to fine soils and some medium soils. To
be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

Part 6, Section 1.3:1986 Test 6.1.3 Standard method for in situ tests
Covers the determination of the CBR of soil in situ. Applicable to fine, medium, and some coarse soils. To be read in conjunction with
Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 6, Section 2:- Determination of the compressive strength of specimens tested in undrained triaxial
compression

Part 6, Section 2.1:1986 Test 6.2.1 Method without measurement of pore water pressure
Covers the determination of the compressive strength of specimens of soil in the triaxial compression apparatus under conditions in
which the cell pressure is maintained constant, and there is no change in the water content of the specimens. The test is limited to
specimens in the form of right cylinders of height approximately equal to twice the diameter. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

Part 6, Section 3:- Determination of the unconfined compressive strength of cohesive soil

Part 6, Section 3.1:1986 Test 6.3.1 Standard method using laboratory apparatus
Covers the determination of the unconfined compressive strength of a specimen of non-fissured cohesive soil, using a laboratory
compression testing machine. The test is limited to specimens in the form of right cylinders of height approximately equal to twice the
diameter. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 6, Section 3.2:1986 Test 6.3.2 Alternative method using autographic apparatus
Covers the determination of the unconfined comparative strength of a specimen of non-fissured cohesive soil, using a portable
compression testing machine which produces a chart record of axial load and compression. The test is limited to cylindrical
specimens nominally 40 mm diameter and 80 mm long. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 6, Section 5:- Determination of the penetration resistance of a soil

Part 6, Section 5.1:1988 Test 6.5.1 Standard penetration test (SPT)


Describes the procedure for determining the resistance of soils to the penetration of a split-tube sampler, and the obtaining of
disturbed samples of soils for identification purposes.
Included in Supplement 1; not available separately
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 6, Section 5.2:1988 Test 6.5.2 Hand method using a dynamic cone pentrometer
Describes the procedure for determining the resistance of a soil to the penetration of a steel cone driven by a 9 kg falling mass.
Included in Supplement 1; not available separately
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 6, Section 5.3:1988 Test 6.5.3 Cone penetration resistance using a cone or a friction cone
Describes the procedure for determining the static cone resistance of a soil in the field using a cone and additionally the side skin
friction and friction ratio if a friction cone is used. The method permits the use of either mechanical or electrical pentrometers.
Included in Supplement 1; not available separately
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

Part 7:- Soil consolidation tests

Part 7, Section 1:1986 Test 7.1 Determination of the one-dimensional consolidation properties
Covers the determination of the magnitude and rate of consolidation of a saturated or near-saturated specimen of soil in the form of
a disc confined laterally, subjected to vertical axial pressure, and allowed to drain freely from the top and bottom surfaces. To be
read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$34.95+GST (Members), $43.69+GST (Retail), 14 pages

AS/NZS 4402:1996 Hexagon head tapping screws


Specifies the dimensions and mechanical properties of heat-treated steel hexagon head tapping screws in sizes from ST 2.2 to ST
9.5 inclusive. Identical to and reproduced from ISO 1479:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS 4403:1976 Code of practice for the storage, handling and use of explosives (Explosives Code)
Describes the essential requirements and precautions necessary for ensuring safety in the storage and handling of factory-made
explosives and certain types of explosives mixed on site.
Reprinted incorporating Amendment 1:1988
Cited in Geothermal Energy Regulations 1961
$59.95+GST (Members), $74.94+GST (Retail), 68 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4403:1996 Slotted pan head tapping screws


Specifies the dimensions and mechanical properties of heat-treated steel slotted pan head tapping screws in sizes from ST 2.2 to ST
9.5 inclusive. Identical to and reproduced from ISO 1481:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS 4404:2004 Land development and subdivision engineering


Specifies design requirements for land and subdivision engineering. Suitable for adoption by Territorial Authorities.
$199.95+GST (Members), $249.94+GST (Retail), 224 pages

NZS 4404:2004 CAD Land development and subdivision engineering - CAD file
Downloadable file of CAD drawings from NZS 4404:2004.
$29.95+GST (Members), $37.44+GST (Retail)

NZS 4404:2004 CAD PDF Land development and subdivision engineering - CAD PDFs
Downloadable file of CAD drawings from NZS 4404:2004 in PDF format.
$29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4404:1996 Slotted countersunk (flat) head tapping screws (common head style)
Specifies the dimensions and mechanical properties of heat-treated steel slotted (flat) head tapping screws in sizes from ST 2.2 to
ST 9.5 inclusive. Identical to and reproduced from ISO 1482:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS 4405:1986 Helical lock-seam corrugated steel pipes


Specifies requirements for full circular shape corrugated steel pipes manufactured from galvanized steel strip. The pipe is formed by
a continuous helical lock-seam, and only pipes in which the direction of the corrugations run helically to the longitudinal axis of the
pipe are covered. Requirements for base metal, lock-seam strength, coupling bands, perforations, protective coating and
workmanship are specified. Identical to AS 1761:1985 with modifications for New Zealand.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 9 pages
Amendment A, 1986 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4405:1996 Slotted raised countersunk (oval) head tapping screws (common head style)
Specifies the dimensions and mechanical properties of heat-treated steel slotted raised (oval) head tapping screws in sizes from ST
2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 1483:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

NZS 4406:1986 Helical lock-seam corrugated steel pipes - Design and installation
Lays down essential requirements for the installation of pipes manufactured to NZS 4405. Details considerations to be taken into
account in design calculations and installation procedures. Design soil compaction, design pressure, ring compression, stresses,
thickness and handling stiffness are covered. Sectional properties for each size of the four corrugations are tabulated. Appendices
include reference tables of cover limits for some railway and highway live loads. Identical to AS 1762:1984 with modifications for
New Zealand.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 13 pages
Amendment A, 1986 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4406:1996 Cross recessed pan head tapping screws


Specifies the dimensions and mechanical properties of heat-treated steel cross-recessed pan head tapping screws in sizes from ST
2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 7049:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

NZS 4407:- Methods of sampling and testing road aggregates

Part 1:1991 Preliminary and general


Covers the sampling and testing of road aggregates. Establishes definitions and requirements for test apparatus.
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

Part 2:1991 Methods of sampling road aggregates


Sets out the principles to be observed in sampling naturally occurring or manufactured road aggregates and details of packaging,
transportation and subdivision of samples for testing.
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

Part 3:- Methods of testing road aggregates - Laboratory tests

Part 3, Section 1:1991 Test 3.1 The water content of aggregate


Covers the determination of the water content of aggregate as a percentage of its dry mass by oven drying.
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 3, Section 2:1991 Test 3.2 The cone penetration limit


Covers the determination of the cone penetration limit of the fine fraction of an aggregate.
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 3, Section 3:1991 Test 3.3 The plastic limit


Covers the determination of the plastic limit of an aggregate.
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 3, Section 4:1991 Test 3.4 The plasticity index


Covers the determination of the plasticity index of the fine fraction of an aggregate.
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

Part 3, Section 5:1991 Test 3.5 The clay index


Outlines the method of test for a methylene blue titration test used to estimate the percentage of expansive clay material in natural
fines or rock powders.
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

Part 3, Section 6:1991 Test 3.6 The sand equivalent


Covers a field or laboratory test for measuring the relative amounts of silt or clay size particles in fine aggregates or fine fractions of
aggregates.
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

Part 3, Section 7:- The solid density of aggregate particles

Part 3, Section 7.1:1991 Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve
Covers the determination of the solid density of combined coarse and fine road aggregate particles passing a 19 mm test sieve.
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 3, Section 7.2:1991 Test 3.7.2 Immersion in water method for coarse aggregate
Covers the determination of the solid density of coarse aggregate particles, using Archimedes principle.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 8:- The particle-size distribution

Part 3, Section 8.1:1991 Test 3.8.1 Preferred method by wet sieving


Covers the determination of the particle-size distribution of an aggregate down to the 75 m fraction by wet sieving. It is applicable to
all materials including granular materials containing appreciable amounts of cohesive or non-cohesive fine particles.
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 3, Section 8.2:1991 Test 3.8.2 Subsidiary method by dry sieving


Covers the determination of the particle-size distribution of an aggregate down to 75 m by dry sieving. Applicable to materials which
do not contain significant amounts of cohesive fines.
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 3, Section 9:1991 Test 3.9 The cleanness value of coarse aggregate
Specifies the procedure for determining the cleanness of coarse aggregate less than 26.5 mm in size in terms of a `cleanness value`
which is a function of the amount, fineness and character of the clay-like material present, with or on the coarse aggregate particles,
for example, sealing chips.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 10:1991 Test 3.10 The crushing resistance of coarse aggregate under a specific load
Specifies a procedure for determining the crushing resistance of aggregates. Measures the percentage of fines generated by the
application of a specified load.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 11:1991 Test 3.11 The weathering quality index of coarse aggregate
Specifies the procedure to assess the resistance of aggregate to the effects of wetting, drying, heating and cooling.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

Part 3, Section 12:1991 Test 3.12 The abrasion resistance of aggregate by use of the Los Angeles machine
Covers the procedure for measuring the breakdown of an aggregate subjected to abrasion in a Los Angeles testing machine.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
Part 3, Section 13:1991 Test 3.13 The size and shape of aggregate particles
Covers the determination of the size and shape of aggregate particles, for example, sealing chips.
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

Part 3, Section 14:1991 Test 3.14 The broken faces content of aggregate
Covers the determination of the proportion of broken faces in an aggregate test sample, or a fraction of a test sample.
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

Part 3, Section 15:1991 Test 3.15 The California Bearing Ratio (CBR)
Covers the determination of the CBR of an aggregate when compacted and tested in a laboratory. The method is applicable to
aggregates passing a 19 mm test sieve.
$34.95+GST (Members), $43.69+GST (Retail), 10 pages

Part 4:- Methods of testing road aggregates - Field tests

Part 4, Section 1:- The density of compacted aggregate

Part 4, Section 1.1:1991 Test 4.1.1 Sand replacement method


Covers the determination in situ of the density of compacted aggregates.
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

Part 4, Section 2:- The field water content and field dry density of compacted aggregate

Part 4, Section 2.1:1991 Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct transmission
mode
Sets out the method for determining the field water content and field dry density of a compacted aggregate using a nuclear surface
moisture-density gauge in the direct transmission mode of operation. Appropriate to aggregates having a nominal maximum particle
size of 40 mm.
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 4, Section 2.2:1991 Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode
Sets out the method for determining the field water content and field dry density of a compacted aggregate using a nuclear surface
moisture-density gauge in the backscatter mode of operation. Appropriate to aggregates having a nominal maximum particle size of
40 mm.
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 4, Section 2.3:1991 Test 4.2.3 Calibration of nuclear surface moisture-density gauge for field use
Sets out the method for the calibration of a nuclear surface moisture-density gauge for field use against the results obtained by the
method for the determination of the water content of an aggregate (Test 3.1) and the method contained in Test 4.1.1.
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

Part 4, Section 2.4:1991 Test 4.2.4 Calibration of nuclear surface moisture-density gauge using standard blocks
Sets out the method for the calibration of a nuclear surface moisture-density gauge using standard blocks, and the checking of
density calibrations.
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

NZS 4407:- Complete set: Methods of sampling and testing road aggregates
A complete set of all current NZS 4407 documents.
$179.95+GST (Members), $224.94+GST (Retail)

AS/NZS 4407:1996 Cross recessed countersunk (flat) head tapping screws (common head style)
Specifies the dimensions and mechanical properties of heat-treated steel cross-recessed countersunk (flat) head tapping screws
(common head style) in sizes from ST 2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 7050:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

NZS 4408:1988 (Withdrawn)

AS/NZS 4408:1996 Cross recessed raised countersunk (oval) head tapping screws
Specifies the dimensions and mechanical properties of heat-treated steel cross-recessed countersunk (oval) head tapping screws in
sizes from ST 2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 7051:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 4409:1996 Hexagon washer head tapping screws


Specifies the dimensions and mechanical properties of heat-treated steel hexagon washer head tapping screws in sizes from ST 2.2
to ST 9.5 inclusive. Identical to and reproduced from ISO 7053:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

AS/NZS 4410:1996 Hexagon flange head tapping screws


Specifies the dimensions and mechanical properties of heat-treated steel hexagon flange head tapping screws in sizes from ST 2.2
to ST 9.5 inclusive. Identical to and reproduced from ISO 10509:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

NZS 4411:2001 Environmental standard for drilling of soil and rock


Sets out the minimum national environmental performance requirements for drilling of soil and rock, the construction, testing and
maintenance of bores, the decommissioning of holes and bores and record keeping.
Reprinted to append Amendment 1:2003
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4411:1996 Tapping screws thread


Specifies the dimensions of the thread and thread ends for tapping screws with thread sizes from ST 1.5 to ST 9.5 inclusive.
Identical to and reproduced from ISO 1478:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4412:1996 Heat-treated steel tapping screws - Mechanical properties


Specifies the mechanical properties of heat-treated steel tapping screws with threads in accordance with AS/NZS 4411:1996 in sizes
from ST 2.2 to ST 8 inclusive. Identical to and reproduced from ISO 2702:1992.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4414:1996 Ghost-cancelling reference signals for Australian and New Zealand PAL television
broadcasting systems
Specifies a ghost-cancelling reference (GCR) signal that may be inserted into the transmitted television signal by broadcasters, and
used by suitably equipped television receivers to eliminate, or at least reduce considerably, annoying ghost images often
experienced in the analogue PAL systems in Australia and New Zealand.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

AS/NZS 4415:- Radiotelephone transmitters and receivers for the maritime mobile service operating in the
VHF bands - Technical characteristics and methods of measurement

4415.1:2003 Shipborne equipment and limited coast stations (including DSC)


Provides minimum requirements for VHF transmitters and receivers for use on board ships in the maritime mobile services. An
annex sets out proposed variations to these requirements for application in Australia and New Zealand. This Standard is reproduced
from IEC 61097-7:1996 and varied to suit Australian/New Zealand conditions.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 45 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

4415.2:2003 Major coast stations, limited coast stations, ship stations and handheld stations (non DSC)
Specifies the minimum requirements for VHF transmitters and receivers and transceivers for major coastal stations and handheld
stations in the maritime mobile service. This Standard is reproduced from ETS 300 162:1998 and varied to suit Australian/New
Zealand conditions.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 54 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4417:- Marking of electrical products to indicate compliance with regulations

4417.1:2000 General rules for use of the mark


Provides general requirements for the use of a specified trademark (the Regulatory Compliance Mark) on electrical products to
indicate compliance with regulations. Covers entitlement to use the mark and general requirements for use.
Cited in Radiocommunications (Compliance) Notice 2004
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

4417.2:2001 Specific requirements for electrical safety regulatory applications


Provides general requirements for the use of the Regulatory Compliance Mark to indicate that a product complies with electrical
safety regulations in Australia and New Zealand. Includes appendices giving lists of electrical regulators, regulatory definitions,
applicable Standards and procedures for satisfying electrical safety regulatory requirements.
Reprinted to incorporate Amendment 1:2005
Cited in Radiocommunications (Compliance) Notice 2004
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

4417.3:1996 Specific requirements for electromagnetic compatibility regulatory applications


Provides specific requirements for the use of the Regulatory Compliance Mark to indicate that a product complies with
electromagnetic compatibility regulations in Australia and New Zealand.
Cited in Radiocommunications (Compliance) Notice 2004
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

4417.4:1999 Specific requirements for radio apparatus regulatory requirements


Provides specific requirements for the use of the Regulatory Compliance Mark to indicate that a piece of radio apparatus complies
with the relevant radio apparatus regulations in Australia and New Zealand.
Cited in Radiocommunications (Compliance) Notice 2004
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

AS/NZS 4422:1996 (Superseded by NZS 5828:2004)

NZS/BS 4429:1987 (Withdrawn)

NZS 4431:1989 Code of practice for earth fill for residential development
Describes earth fill practices which experience has shown to produce fills of satisfactory stability for residential development.
Reprinted to append Amendment 1:1992
Cited in BIA Approved Document B1/VM1
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4431:1996 Guidelines for safe working on new lift installations in new constructions
Describes recommended safe working provisions and practices for those responsible for, and involved in, new lift installations in new
construction.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

AS/NZS 4432:1996 Radar transponders for marine search and rescue (SART) - Operational and performance
requirements and methods of test
Provides performance requirements and test methods for marine search and rescue radar transponders (SART) to ensure
compliance with requirements for the 1974 international convention for Safety of Life at Sea (SOLAS) and Australia and New
Zealand spectrum planning. Identical to and reproduced from IEC 61097-1:1992.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

AS/NZS 4434:- Medical electrical equipment - Medical electron accelerators

4434.1:1996 Functional performance characteristics


Specifies test procedures for the determination and disclosure of functional performance characteristics for electron accelerators to
enable intending purchasers to compare performance of different models. Identical to and reproduced from IEC 60976:1989.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 70 pages

4434.2:1996 Periodic function performance testing


Takes the performance figures obtained in the first part of this Standard and applies them to a continuing in-service testing regime.
Identical to and reproduced from IEC 60977:1989.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 52 pages

AS/NZS 4435:- Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c.

4435.2:1999 Standard strength classes and end fittings for string insulator units
Specifies values for the mechanical characteristics of composite string insulator units. This Standard defines the main dimensions of
the couplings to be used on composite string insulator units to allow interchangeability of units or insulators supplied by different
manufacturers and to allow, whenever practicable, interchangeability with existing installations. This Standard is based on but not
equivalent to and has been reproduced from IEC 61466-1:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4437:1996 Solderless crimped connections - General requirements, test methods and practical
guidance
Specifies general requirements and methods of test for solderless crimped connections made with stranded wires of 0.05 mm2 to 10
mm2 cross-sectional area or solid wires of 0.25 mm to 3.6 mm diameter and appropriately designed uninsulated or pre-insulated
crimp barrels. Information on materials and data from industrial experience is included. Appendix ZZ lists variations for Australian
and New Zealand conditions. Equivalent to IEC 60352-2:1990.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 40 pages

AS/NZS 4438:1997 Height adjustable swivel chairs


Specifies requirements, selection and evaluation criteria for height adjustable swivel chairs. The Standard is the first of a series to be
developed under a memorandum of understanding between Standards Australia and the Australian Furniture Research and
Development Institute Limited (AFRDI).
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 62 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4441:2008 Swimming pool design Standard


This is a substantial revision of the 1985 Code of practice for swimming pools. The revision covers the essentials of design and
construction of public, institutional, and private freshwater and seawater swimming pools, and the provision of water treatment
facilities. It provides guidance on the suitable minimum requirements to set when contracting for design and construction of
swimming pools or when contemplating the purchase of a pool, and guidelines for the requirements that should be met to achieve
safety and good operational management. It does not cover the provision of heating or other special equipment, operation and
maintenance, nor the supervision necessary to ensure the physical safety of pool users.
$69.95+GST (Members), $87.44+GST (Retail), 60 pages

AS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applications


Specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for piping systems
intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and for services, for
pressurized sewer systems and for irrigation systems.
Joint Australian/New Zealand Standard
$89.95+GST (Members), $112.44+GST (Retail), 48 pages

AS/NZS 4441(Int):1996 (Interim standard: expired 5 December 2000)

NZS 4442:1988 Welded steel pipes and fittings for water, sewage and medium pressure gas
Applies to welded steel pipes and fittings with butt welded seams in sizes of 100 mm to 1000 mm nominal pipe sizes intended
primarily for the conveyance of water, sewage, and medium pressure gas. Specifies standard outside diameters and requirements
for commonly used fittings. Also specifies external protective coatings and internal linings.
Cited in BIA Approved Documents E1/AS1, G13/AS2 and G14/VM1
$64.95+GST (Members), $81.19+GST (Retail), 29 pages

AS/NZS 4442:1997 Office desks


Specifies requirements and selection and evaluation criteria for office desks. This Standard was developed under a memorandum of
understanding between Standards Australia and the Australasian Furnishing Research and Development Institute (AFRDI).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

AS/NZS 4443:1997 Office panel systems - Workstations


Specifies requirements and selection and evaluation criteria for office workstations. This Standard was developed under a
memorandum of understanding between Standards Australia and the Australasian Furnishing Research and Development Institute
(AFR).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 40 pages

AS/NZS 4444.2:2000 (This Standard was redesignated as AS/NZS 7799.2:2000 on 15 August 2001)

AS/NZS 4445:- Solar heating - Domestic water heating systems

4445.1:1997 Performance rating procedure using indoor test methods


This Standard provides an indoor test method for rating solar domestic water heating for thermal performance under benchmark
conditions. Identical to and reproduced from ISO 9459.1:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4447:1997 Wool - IWTO Core Test Regulations


Sets out the IWTO regulations relating to the core sampling and testing of raw wool and to the issue of IWTO Test Certificates and
IWTO Combined Certificates.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 47 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1998 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1999 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4448:1997 Limits and methods of measurement of radio disturbance characteristics for the protection
of receivers used on board vehicles
Specifies limits and test methods to afford protection to radios and television receivers used on board vehicles from radio
disturbance emissions originating in components intended for use in the vehicles. Identical to and reproduced from IEC/CISPR
25:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 43 pages
AS/NZS 4449:1997 Information and documentation - Electronic manuscript preparation and markup
Describes four document type definitions and additional facilities conforming to AS 3514. Identical to and reproduced from ISO
12083:1994.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 188 pages

AS/NZS 4450:- Information and documentation - Bibliographic data element directory

4450.1:1997 Interloan applications


Specifies and describes the data elements required in the interchange of data between interlending institutions. It also identifies
messages and their data elements, which are used in interloan transactions. Identical to and reproduced from ISO 8459-1:1988.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

4450.2:1997 Acquisitions applications


Specifies and describes the data elements required in the interchange of data between institutions involved in the acquisition of
bibliographic materials. It also identifies messages and their data elements, which are used in the acquisitions process. Identical to
and reproduced from ISO 8459-2:1992.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages

4450.3:1997 Information retrieval applications


Specifies and describes the data elements required in the interchange of data between information retrieval systems (i.e. terminal-to-
computer or computer-to-computer). It also identifies messages and their data elements, which are used in information retrieval.
Identical to and reproduced from ISO 8459-3:1994.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

4450.4:2000 Circulation applications


Establishes the data elements required to facilitate the interchange of data between circulation systems in the information and
documentation industries. This Standard is identical with and has been reproduced from ISO 8459-4:1998.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 61 pages

4450.5:2003 Data elements for the exchange of cataloguing and metadata


Specifies and describes data elements required in the interchange of data between cataloguing systems and identifies messages
and their data elements which are used in cataloguing systems. Identical with and reproduced from ISO 8459-5:2002.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages

NZS 4451:1974 (Superseded by NZS/AS 3725:1989)

NZS 4452:1986 (Withdrawn)

AS/NZS 4452:1997 The storage and handling of toxic substances


Sets out requirements and recommendations for the storage and handling of toxic substances that in Australia, meet the Class 6.1
classification criteria of the ADG Code and in New Zealand, the Class 6.1 classification criteria of the IMDG Code and Schedules 1-4
of the New Zealand Toxic Substances Regulations 1983. The Standard applies to Class 6.1 substances and may also apply to
substances of other classes having a 6.1 Subsidiary Risk. A discussion of the hazards presented by toxic substances and a
bibliography of documents providing guidelines on the preparation of emergency plans are provided in appendices.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 49 pages

AS/NZS 4453:- Protective clothing for users of hand-held chainsaws

4453.1:1997 Test rig for testing resistance to cutting by a chainsaw


Specifies the requirements for a test rig for testing protective clothing for users of hand-held chainsaws for resistance to cutting by a
chainsaw. Identical to and reproduced from EN 381-1:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
4453.2:1997 Test methods for leg protectors
Specifies the requirements for testing protective legwear for users of hand-held chainsaws for dimensional change, protective
coverage and resistance to cutting by a chainsaw. Identical to and reproduced from EN 381-2:1995.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4453.3:1997 Protective legwear


Specifies the requirements for the design and performance of protective trousers and leggings (chaps) for users of hand-held
chainsaws.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4454:2005 Composts, soil conditioners and mulches


Prescribes compositional requirements, compliance requirements, sampling and testing methods for composts, soil conditioners and
mulches. Based on the equivalent Australian Standard, AS 4454:2003, the labelling requirements have been modified to fall in line
with the guidelines issued by the Ministry of Health for potting mixes. Limits for heavy metal contaminants and organic contaminant
residues have been included in alignment with the interim values of the Biosolids Guidelines issued by the New Zealand Water and
Wastes Association, 2003 (Classification a, Table 4.2 of the guidelines). Limits for indicator organisms, have been included to ensure
microbiological quality of certain categories of products.
$94.95+GST (Members), $118.69+GST (Retail), 60 pages

AS/NZS 4455 Masonry units, pavers, flags and segmental retaining wall units

AS/NZS 4455.1:2008 Masonry units


Provides users and specifiers with the requirements for masonry units used in pavement construction.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 28 pages

AS/NZS 4455.3:2008 Segmental retaining wall units


Provides users and specifiers with the requirements for segmental retaining wall units used in segmental retaining walls.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4456:2003 Masonry units, segmental pavers and flags - Methods of test
Provides a general introduction and a series of 19 test methods for masonry units and segmental pavers. The tests are for sampling,
mean and standard deviation, and for determining dimensions, compressive strength, breaking load, potential to effloresce, core
percentage and material thickness, moisture content and dry density, abrasion resistance, resistance to salt attack, expansion,
contraction, pitting due to salt attack, expansion, contraction, pitting due to lime particles, water absorption properties, lateral
modulus of rupture, permeability to water, rate of absorption and tensile strength.
Reprinted to append Amendment 1 Set:2004
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 86 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4463:1969 (Withdrawn)

NZS/BS 4464:1969 (Withdrawn)

AS/NZS 4471:1997 Information technology - Open Systems Interconnection - Network layer security protocol
Specifies a protocol to be used by end systems and intermediate systems in order to provide security service in the network layer of
the OSI 7-layer model. Identical to and reproduced from ISO/IEC 11577:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 108 pages
AS/NZS 4472:1997 Information technology - Coded representation of picture and audio information -
Progressive bi-level image compression
Specifies a coding method having progressive, progressive-compatible sequential and single-progression sequential modes. Also
suggests a method to obtain any needed low-resolution renditions. Identical to and reproduced from ISO/IEC 11544:1993 including
Corrigendum 1:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 72 pages

AS/NZS 4473:- Information technology - Digital compression and coding of continuous-tone still images

4473.1:1997 Requirements and guidelines


Specifies a process for converting and unconverting source image data to compressed image data. The source image consists of
continuous-tone still digital data. Identical to and reproduced from ISO/IEC 10918-1:1994.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 182 pages

AS/NZS 4474:- Performance of household electrical appliances - Refrigerating appliances

4474.1:2007 Energy consumption and performance


Provides test laboratories with test methods and minimum performance requirements so that the performance, including energy
consumption, of household refrigerating appliances can be measured, compared and evaluated.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 160 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

4474.2:2001 Energy labelling and minimum energy performance standard requirements


Specifies current energy labelling and minimum energy performance standard (MEPS) requirements together with new requirements
to be introduced from 1 October 2004, for electric mains powered refrigerating appliances of the vapour compression type intended
for household and similar use. Transitional aspects of regulation are addressed.
Reprinted to incorporate Amendments 1 to 4
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 37 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4475:- Restraint systems for motor vehicles - Performance tests

4475.0:1997 Introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4475.1:1997 Determination of webbing durability in adjustment duty


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4475.2:1997 Determination of webbing durability in withdrawing and retracting duty through a sash
guide
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4475.3:1997 Determination of fatigue resistance of a flexible member


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4475.4:1997 Determination of adjustment device forces


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
4475.5:1997 Determination of locking angle of a tilt-lock adjustment device
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4475.6:1997 Determination of free-end device strength


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

AS/NZS 4476:1997 Acoustics - Octave-band and fractional-octave-band filters


Specifies performance requirements and methods for testing the performance of analogue, sampled-data and digital
implementations of band-pass filters that comprise a filter set or spectrum analyzer. Performance requirements are provided for three
filter classes. It is identical with and has been reproduced from IEC 61260:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4477:1997 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Identification supplementary services
Specifies identification supplementary services applicable to various basic services supported by private integrated service networks.
The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services
networking. Identical to and reproduced from ISO/IEC 14136:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4478:1997 Guide to the reprocessing of reusable containers for the collection of sharp items used in
human and animal clinical/medical applications
Provides guidelines for the emptying, cleaning and disinfection of reusable containers utilized in the collection of sharp items used in
human and animal clinical/medical applications.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

NZS/BS 4480.2-1974 (Withdrawn)

NZS/BS 4481.2-1983 (Withdrawn)

AS/NZS 4481:1997 Pressure equipment - Competencies of inspectors


Sets out the competencies required for design verifiers, fabrication inspectors and in-service inspectors of pressure equipment.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 4483:- (Withdrawn)

AS/NZS 4486.1:1997 (Superseded by NZS 5828:2004)

AS/NZS 4487:1997 Pyrogen fire extinguishing systems


Provides users of pyrogen fire extinguishing aerosol systems with specific requirements for the control of fires of Classes A, B, C or
F and E type.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

AS/NZS 4488:- Industrial rope access systems

4488.1:1997 Specifications
Specifies requirements for materials and hardware for industrial rope access systems including fall protection.
Reprinted to incorporate Amendment 1.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
Amendment 1, 1999 $29.95+GST (Members), $37.44+GST (Retail)

4488.2:1997 Selection, use and maintenance


Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial rope access system
components and assemblies.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 4490:1997 Timber - Stress-graded - Procedures for monitoring structural properties


Provides procedures for determination and periodic monitoring of structural properties by in-grade testing. The procedures can be
used to establish stress-grades for an identified population of production material.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 4491:1997 Timber - Glossary of terms in timber related Standards


Includes definitions of terms used in timber related Australian and New Zealand Standards. Includes new products and reflects
changes in a number of Standards being published at present.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 56 pages

AS/NZS 4492:- Wool - Fleece testing and measurement

4492.0:2000 Introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

4492.1:2000 Weighing and sampling greasy wool for fleece testing and measurement
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

4492.2:2000 Determination of washing yield and clean fleece weight


Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

4492.3:2000 Measurement of mean fibre diameter using Airflow and Sonic A instruments
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

4492.4:2000 Measurement of mean fibre diameter and determination of fibre diameter distribution using
SIROLAN-LASERSCAN measuring system
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4492.5:2000 Measurement of mean fibre diameter using the OFDA measuring system
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

4492.6(Int):1997 (Interim standard - expired 5 September 1999)

AS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewer - General performance
requirements
Specifies the general performance requirements for discharge of liquid, commercial and industrial liquid waste to sewer.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4495:1997 Radiotherapy equipment - Coordinates, movements and scales


Defines a consistent set of coordinate systems for use throughout the process of teleradiotherapy, to enable equipment to be re-
aligned with a previously treated site. The Standard is identical with and has been reproduced from IEC 61217:1996.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 61 pages

AS/NZS 4496:1997 Recommended practice for the colour coding of steel products
Gives a recommended practice for the colour coding of steel products of various wrought forms and alloy designations, for
identification purposes. Also includes a colour-coding system to indicate product thickness. An appendix gives details of colour
formulations.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 4499:- Protective headgear for cricket

4499.1:1997 Helmets
Specifies requirements for helmets used in cricket to mitigate the effects of a blow to the head by a cricket ball. Includes
construction, strength of retention system and its attachment points, impact energy attenuation, and labelling requirements. Helmets
complying with this Standard are not intended to protect wearers against a severe blow from a cricket bat.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4499.2:1997 Temple protectors


Specifies requirements for temple protectors to be attached to cricket helmets to mitigate the effects of a blow to the side of the head
by a cricket ball. Includes construction, testing and labelling requirements. Temple protectors complying with this Standard are not
intended to protect wearers against a severe blow from a cricket bat.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4499.3:1997 Faceguards
Specifies requirements for faceguards to be attached to cricket helmets to mitigate the effects of a blow to the face by a cricket ball.
Includes construction, testing and labelling requirements. Faceguards complying with this Standard are not intended to protect
wearers against a severe blow from a cricket bat.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

NZS/BS 4500.3-1973 (Withdrawn)

NZS 4501:1972 Code of practice for the location marking of fire hydrants
Provides a system for marking the location of fire hydrants so that they can be readily identified by the Fire Service and, where
necessary, by the general public.
Reprinted to append Amendment 1:1980
$34.95+GST (Members), $43.69+GST (Retail), 8 pages
Amendment 1, 1980 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4501 Occupational protective clothing

AS/NZS 4501.1:2008 Guidelines on the selection, use, care and maintenance of protective clothing
Provides guidelines for users of occupational clothing. Identical to CEN/TR 15321:2006.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 28 pages

AS/NZS 4501.2:2006 General requirements


Provides basic requirements for protective clothing. It is not intended to be used alone but in combination with a specific Standard.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

NZS 4502:1972 (Withdrawn)


AS/NZS 4502:- Methods for evaluating clothing for protection against heat and fire

4502.1:2006 Evaluation of thermal behaviour of materials and material assemblies when exposed to a
source of radiant heat
Specifies two complementary methods (method A and method B) for determining the behaviour of materials for heat protective
clothing subjected to heat radiation. Identical to and reproduced from ISO 6942:2002.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

4502.2:1997 Evaluation of heat transmission of materials and material assemblies when exposed to
flame
Sets out a method for determining the behaviour of protective clothing or its constituents when exposed to flame. This Standard is
identical with and reproduced from ISO 9151:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

4502.3:1997 Evaluation of the behaviour of materials and material assemblies when exposed to small
splashes of molten metal
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to small splashes of
molten metal. This Standard is identical with and reproduced from ISO 9150:1988.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

4502.4:1997 Evaluation of the behaviour of materials and material assemblies when exposed to heavy
splashes of molten metal
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to molten metal splash.
This Standard is identical with and reproduced from ISO 9185:1990.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

4502.5:1997 Evaluation of the contact heat transmission through material and material assemblies
Sets out a method for determining the contact heat transmission of protective clothing or its constituents in the range of 100 degrees
C to 500 degrees C This Standard is identical with and reproduced from ISO 12127:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

NZS 4503:2005 Hand operated fire-fighting equipment


Gives requirements for the selection, installation, distribution and maintenance of hand operated fire-fighting equipment which can be
used by one person. This includes portable and wheeled fire extinguishers, fire hose reels, fire blankets and requirements for
commercial and domestic buildings. In this edition consideration has been given to vehicles and boats which are not covered by
other regulations.
Will supersede NZS 4503:1993 for compliance purposes from 18 July 2006. Reprinted to incorporate Amendment 1:2006
$94.95+GST (Members), $118.69+GST (Retail), 77 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4503:- Protective clothing - Protection against liquid chemicals

4503.1:1997 (Superseded by AS/NZS ISO 6529:2006)

4503.2:1997 Test method: Determination of resistance to penetration by a jet of liquid (Jet test)
Sets out a method for determining the resistance of materials or their constituents used in the manufacture of protective clothing to
penetration by a jet of water. This Standard is identical with and reproduced from European (CEN) Standard EN 463:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4503.3:1997 Test method: Determination of resistance to penetration by spray (Spray Test)


Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to penetration by a spray
of water. This Standard is identical with and reproduced from European (CEN) Standard EN 468:1994.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages
NZS 4504:1981 (Superseded by AS/NZS 1221:1997)

NZS/BS 4504: (Superseded by AS/NZS 4331)

AS/NZS 4504:- Domestic garage doors - Methods of test

4504.0:1998 Introduction and list of methods


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4504.1:1998 Test sample and preparation of wind pressure test


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 1 page

4504.2:1998 Wind pressure test


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4504.3:1998 Durability cycle test


Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

SNZ PAS 4505:2007 Firefighting waterway equipment


Sets out minimum manufacturing, technical and performance requirements for fire-fighting waterway equipment for use by the New
Zealand Fire Service (NZFS), the New Zealand National Rural Fire Authority (NZNRFA) and Industrial Fire Brigades. Also covers
fire-fighting waterway equipment primarily for Fire Service use when attending and dealing with emergencies.
$84.95+GST (Members), $106.19+GST (Retail), 54 pages

AS/NZS 4505:1998 Domestic garage doors


Specifies requirements for the design, construction, performance and installation of domestic garage doors. Also specifies the
resultant loads on structures onto which such garage doors are mounted. An appendix gives an example of a typical marking for the
garage door or for the garage door packaging.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

NZS 4506:1978 (Superseded by AS/NZS 1841 Parts 1, 2, 4 & 5:1997)

AS/NZS 4506:1998 (Withdrawn)

NZS 4507:1978 (Superseded by AS/NZS 1850:1997)

AS/NZS 4507:2006 Cables - Classification of characteristics when exposed to fire


Specifies the performance requirements of cables when exposed to fire with respect to specific characteristics and allocates a
classification.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages

NZS 4508:1979 (Superseded by AS/NZS 1841.6:1997)

SNZ PAS 4509:2008 New Zealand Fire Service firefighting water supplies code of practice
Shows clearly what is required to enable the Fire Service to have access to sufficient water during emergencies. Provides up-to-
date practices for planning and approving a subdivision, sizing a water storage facility, and when replacing or renewing a water main.
Guidance ahs been provided on water storage facilities in rural areas and detail is included about alternative firefighting water
sources.
$89.95+GST (Members), $112.44+GST (Retail), 70 pages
NZS 4510:2008 Fire hydrant systems for buildings
Sets out the minimum technical and performance requirements for fire hydrant systems installed in buildings.
Reprinted to incorporate Amendment 1:2009
$109.95+GST (Members), $137.44+GST (Retail), 100 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4510:1999 Isolated electrical supply systems for medical use


Specifies requirements for the design, construction and testing of isolated electrical supplies for medical use. The Standard does not
apply to electrical power supplies incorporated within equipment.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

NZS 4511:1979 (Withdrawn)

AS/NZS 4511:1999 Ultrasonics - Pressure pulse lithotripters - Characteristics of fields


Specifies measureable parameters for the declaration of the acoustics output of extracorporeal lithotripsy equipment and methods of
measurement and characterization of the pressure field generated by lithotripsy equipment. This Standard is identical with and has
been reproduced from IEC 61846:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

NZS 4512:2003 Fire detection and alarm systems in buildings


Provides specifiers, users, manufacturers, suppliers, installers and maintenance persons with requirements to enable a fire warning
from a fire alarm system in a building to operate at the earliest practicable moment to facilitate appropriate emergency measures.
$119.95+GST (Members), $149.94+GST (Retail), 104 pages

AS/NZS 4512:1999 Ultrasonics - Surgical systems - Measurement and declaration of the basic output
characteristics
Specifies the essential non-thermal output characteristics of ultrasonic surgical units, methods of measurement of these output
characteristics, those characteristics which should be declared by the manufacturers of such equipment. This Standard is identical
with and has been reproduced from IEC 61847:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

AS/NZS 4513:1995 Medical electrical equipment - Fundamental aspects of Safety Standards


Identifies fundamental considerations to be taken into account in developing Standards to ensure the safety of medical electrical
equipment. It also provides a guide to the strategies and methodologies used in developing the IEC 60601 and AS/NZS 3200 series
of Standards. Identical to and reproduced from IEC 60513:1994.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 56 pages

NZS 4514:2002 Interconnected smoke alarms for single household units


This Standard sets out the requirements for the installation and commissioning of externally powered interconnected smoke alarms.
It also provides information on the selection, installation and maintenance of smoke alarms.
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4514:1997 (Withdrawn)

NZS 4515:2003 Fire sprinkler systems for residential occupancies


This Standard applies to buildings used solely as a residence - including care institutions, hostels, boarding houses, apartment
buildings, motels, retirement homes, rest homes, transitional houses and hospital ward areas. It recommends the use of residential
sprinkler heads as benefits include rapid response and fire control.
$139.95+GST (Members), $174.94+GST (Retail), 92 pages
AS/NZS 4515:1998 (Withdrawn)

NZS 4516:1991 (Superseded by AS/NZS 3504)

AS/NZS 4516:1998 Abrasive products - Diamond or cubic boron nitride grinding wheels - Dimensions
Specifies the minimum dimensional requirements for diamond or cubic boron nitride grinding wheels. This Standard is identical with
and has been reproduced from ISO 6168:1980.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

NZS 4517:2002 Fire sprinkler systems for houses


This Standard specifies minimum requirements for the design, material and installation of fire sprinkler systems for domestic
occupancies, and advises on periodic testing and maintenance of these fire sprinkler systems.
Reprinted to append Amendment 1:2003
$59.95+GST (Members), $74.94+GST (Retail), 68 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4517:1998 (Withdrawn)

AS/NZS 4518:- Bonded abrasives - Determination and designation of grain size distribution

4518.1:1997 Macrogrits F4 to F220


Specifies means for determining the grain size distribution of macrogrits of diamond or cubic boron nitride in the range of F4 to F220
as used in the manufacture of grinding wheels and saws. This Standard is identical with and has been reproduced from ISO 8486-
1:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4518.2:1997 Microgrits F230 to F1200


Specifies means for determining the grain size distribution of microgrits of fused aluminium oxide and silicon carbide in the range of
F230 to F1200 as used in the manufacture of grinding wheels and saws. This Standard is identical with and has been reproduced
from ISO 8486-2:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 25 pages

AS/NZS 4519:1997 (Withdrawn)

AS/NZS 4520:1997 Abrasive grains - Sampling and splitting


Specifies a method for the sampling and splitting of a lot of abrasive grains intended for use in the manufacture of grinding wheels
and saws. This Standard is identical with and has been reproduced from ISO 9138:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

NZS 4521:1974 Specification for boxes for fire brigade connections


Specifies the requirements for enclosures for fire brigade connections to wet and dry riser inlets, automatic sprinkler system inlets,
drencher system inlets, foam inlets, water storage tanks, and to any other emergency facilities.
Reprinted to append Amendment 1:1988
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4521:1997 Abrasive grains - Test-sieving machines


Specifies operational and technical requirements and guidance on the maintenance of test sieving machines. This Standard is
identical with and has been reproduced from ISO 9284:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages
AS/NZS 4523:1998 Bonded abrasive products - General - Designation, marking, range of outside diameters
and tolerances
Specifies basic requirements for grinding wheels, segments, sticks and bricks. This Standard does not cover diamond, cubic boron
nitride or cubic boron carbide abrasive products. This Standard is identical with and has been reproduced from ISO 525:1986.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

AS/NZS 4524:- Bonded abrasive products - Dimensions

4524.1:1998 Part 1: Grinding wheels for external cylindrical grinding between centres
Specifies the minimum dimensional requirements for bonded grinding wheels intended for external cylindrical grinding between
centres. This Standard is identical with and has been reproduced from ISO/DIS 603-1:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

4524.2:1998 Part 2: Grinding wheels for centreless external cylindrical grinding


Specifies the minimum dimensional requirements for bonded grinding wheels intended for use for centreless external cylindrical
grinding. This Standard is identical with and has been reproduced from ISO/DIS 603-2:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4524.3:1998 Part 3: Grinding wheels for internal cylindrical grinding


Specifies the minimum dimensional requirements for Type 1 and Type 5 grinding wheels. This Standard is identical with and has
been reproduced from ISO/DIS 603-3:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4524.4:1998 Part 4: Grinding wheels for surface grinding/peripheral grinding


Specifies nominal dimensions for a variety of grinding wheels intended for the grinding of flat surfaces. This Standard is identical with
and has been reproduced from ISO/DIS 603-4:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

4524.5:1998 Part 5: Grinding wheels for surface grinding/side grinding


Specifies nominal dimensions for a variety of grinding wheels intended for the grinding of flat surfaces or two opposite surfaces. This
Standard is identical with and has been reproduced from ISO/DIS 603-5:l996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

4524.6:1998 Part 6: Grinding wheels for tools and tool room grinding
Specifies dimensions for a variety of grinding wheels intended for grinding or regrinding of cutting faces and edges of tools. This
Standard is identical with and has been reproduced from ISO/DIS 603-6:1996.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

4524.7:1998 Part 7: Grinding wheels for off-hand grinding


Specifies nominal dimensions for a variety of grinding wheels intended for grinding hand-held and manually fed workpieces. This
Standard is identical with and has been reproduced from ISO/DIS 603-7:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4524.8:1998 Part 8: Grinding wheels for deburring and fettling/snagging


Specifies requirements for Type 1 grinding wheels intended for rough grinding of workpieces. This Standard is identical with and has
been reproduced from ISO/DIS 603-8:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4524.9:1998 Part 9: Grinding wheels for high-pressure grinding


Specifies dimensions for Type 1 grinding wheels intended for use in automatic billet grinding. This Standard is identical with and has
been reproduced from ISO/DIS 603-9:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
4524.10:1998 Part 10: Honing stones and superfinishings
Specifies dimensions for Type 54 honing stones and superfinishings. This Standard is identical with and has been reproduced from
ISO/DIS 603-10:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4524.11:1998 Part 11: Hand finishing sticks


Specifies dimensions for Type 90 hand finishing sticks. This Standard is identical with and has been reproduced from ISO/DIS 603-
11:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4524.12:1998 Part 12: Grinding wheels for deburring and fettling on a straight grinder
Specifies nominal dimensions for a variety of grinding wheels intended for deburring and fettling. This Standard is identical with and
has been reproduced from ISO/DIS 603-12:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4524.13:1998 Part 13: Grinding wheels for deburring and fettling on a vertical grinder
Specifies nominal dimensions for a variety of abrasive products intended for deburring and fettling of a workpiece using hand-held
machines. This Standard is identical with and has been reproduced from ISO/DIS 603-13:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4524.14:1998 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
Specifies dimensions for a variety of abrasive products intended for deburring and fettling/snagging of workpieces using hand-held
machines. This Standard is identical with and has been reproduced from ISO/DIS 603-14:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 6 pages

4524.15:1998 Part 15: Grinding wheels for cutting-off on cutting-off machines or swing-frame machines
Specifies the dimensions for a variety of abrasive products intended for cutting off or slotting of any part of a workpiece. This
Standard is identical with and has been reproduced from ISO/DIS 603-15:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

4524.16:1998 Part 16: Grinding wheels for cutting-off on an angle grinder


Specifies dimensions for flat (Type 41 ) and depressed centre (Type 42) cutting-off wheels. This Standard is identical with and has
been reproduced from ISO/DIS 603-16:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

SNZ HB 4525:2006 Fire Risk Management Handbook


Identifies how fires could start in places of work and shows simple precautions that will help prevent fires from starting, how to control
their effects and how to recover more quickly from any fire. It seeks to promote the use and benefits of good fire risk management
practices across a wide range of places of work as a way of preventing injury and loss, ensuring the delivery of organisational
objectives, improving strategic and operational management; and improving the insurability of businesses.
$74.95+GST (Members), $93.69+GST (Retail), 76 pages

AS/NZS 4525:1998 (Withdrawn)

AS/NZS 4526:1998 (Withdrawn)

AS/NZS 4527:1998 Abrasive sheets - Dimensions, tolerances and designation


Specifies dimensions, tolerances and designation for abrasive sheets intended for use with portable machines for hand sanding. This
Standard is identical with and has been reproduced from ISO 2235:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages
AS/NZS 4528:1998 Coated abrasives - General purpose rolls - Any backing - Designation and dimensions
Specifies dimensions and designation for general purpose rolls of coated abrasives. This Standard is identical with and has been
reproduced from ISO 3366:1975.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4529:1998 Coated abrasives - Rolls for widths of 50 mm and greater - Any backing - Designation and
dimensions
Specifies designation and dimensions for abrasive rolls for widths of 50 mm and greater. This Standard identical with and has been
reproduced from ISO 3367:1975.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4530:1998 Coated abrasives - Cloth rolls up to and including 40 mm width - Designation and
dimensions
Specifies designation and dimensions of cloth rolls of coated abrasives up to and including 40 mm width. This Standard is identical
with and has been reproduced from ISO 3368:1975.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4531:1998 (Withdrawn)

AS/NZS 4532:1998 (Withdrawn)

AS/NZS 4533:1998 Coated abrasive products - Dimensional tolerances on non-standard conversions


Specifies dimensional tolerances for non-standard discs, belts and other cross-sections for abrasive products. This Standard is
identical with and has been reproduced from ISO 8366:1987.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 2 pages

AS/NZS 4534:2006 Zinc and zinc/aluminium-alloy coatings on steel wire


Specifies requirements for the mass, quality and testing of zinc and zinc/aluminium alloy on steel wire. The coatings are applied in a
continuous process and may be formed either by the application of molten metal or by electrodeposition. Six coating mass classes
are covered.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

AS/NZS 4535:1999 Ambulance restraint systems


Provides requirements for restraining patients, occupants and equipment sharing the same interior space in motor vehicles
specifically designed as, or modified and converted into, ambulances.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

AS/NZS 4536:1999 Life cycle costing - An application guide


Sets out a process for life cycle costing of a product as a component of an economic evaluation. The Standard is intended for use by
both customers (users) and suppliers of products. Following the proposed methodology will give a dollar value representing the life
cycle cost of the product. Appendices propose hypothetical worked examples which reflect the use of the outlined analysis, a sample
spreadsheet indicating typical costs that may occur over the life cycle phases, typical cost-generating activities and an elaboration of
real cost, nominal cost and discounted cost.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 58 pages

AS/NZS 4537:1999 Medical electrical equipment - Dosimeters with ionization chambers as used in
radiotherapy
Sets out performance requirements of radiotherapy dosimeters which measure air kerma, absorbed dose, or the corresponding
rates, in photon and electron radiation. The Standard is technically equivalent to and is reproduced from IEC 60731:1997 and
includes a ZZ Appendix with one variation for Australia and New Zealand.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 88 pages

AS/NZS 4540:1999 Digital broadcasting systems for television, sound and data services - Framing structure,
channel coding and modulation for cable systems
Provides guidance to manufacturers, service providers, carriers and consumers in the design, operation and maintenance of
associated equipment and services, to ensure compatibility and optimum performance in the delivery of program content. This
Standard is identical with and has been reproduced from ETS 300 429:1994.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

NZS 4541:2007 Automatic fire sprinkler systems


This revised edition of NZS 4541 supersedes NZS 4541:2003. It provides rules for the design, installation and maintenance of
sprinkler systems in order that such systems reliably achieve their fire control function. That function is twofold; first, the fire must be
controlled within a specified area and secondly, control should be achieved before levels of toxic or irrespirable products of
combustion become life-threatening.
$299.95+GST (Members), $374.94+GST (Retail), 506 pages

AS/NZS 4541:1999 Digital broadcasting systems for television, sound and data services - Framing structure,
channel coding and modulation for 11/12 GHz satellite services
Specifies framing structure, channel coding and modulation for digital television emission by satellite. Provides a general description
of the system for satellite digital TV transmission and specifies the digitally modulated signal to facilitate compatibility between pieces
of equipment developed by different manufacturers. It identifies global performance requirements and features of the system, in
order to meet service quality targets. This Standard is identical with and has been reproduced from ETS 300 421:1994.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

AS/NZS 4543:- Protective devices against diagnostic medical X-radiation

4543.1:1999 Determination of attenuation properties of materials


Specifies the methods of determining and indicating the attenuation properties of protective devices against X-radiation. This
Standard is identical with and has been reproduced from IEC 61331-1:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

4543.2:1999 Protective glass plates


Specifies requirements for protective glass plates used for the manufacturing of protective devices against X-radiation. This Standard
is identical with and has been reproduced from IEC 61331-2:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

4543.3:2000 Protective clothing and protective devices for gonads


Provides requirements for the design and manufacture of clothing and devices for protection against X-radiation. This Standard is
identical with and has been reproduced from IEC 61331-3:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 4545:- Radionuclide imaging devices - Characteristics and test conditions

4545.1:1999 Positron emission tomographs


Specifies terminology and test methods for declaring the characteristics of positron emission tomographs. This Standard is identical
with and has been reproduced from IEC 61675-1:1998.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

4545.2:1999 Single photon emission computed tomographs


Specifies terminology and test methods for declaring the characteristics of Anger type rotational gamma camera single photon
emission computed tomographs. This Standard is identical with and has been reproduced from IEC 61675-2:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

4545.3:1999 Gamma camera based wholebody imaging systems


Specifies terminology and test methods for declaring the characteristics of gamma camera based wholebody imaging systems. This
Standard is identical with and has been reproduced from IEC 61675-3:1998.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

AS/NZS 4546:2004 Specification for woven wool packs for greasy wool
In this edition requirements for mean bending length and breaking strength of nylon wool pack fabric after exposure to ultraviolet light
have been introduced. Also, in response to changing industry requirements, performance requirements have been altered for both
nylon and polyethlylene (HDPE) fabric.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 33 pages

AS/NZS 4547:- Methods of testing woolpacks for greasy wool

4547.0:2004 Introduction and list of methods


Provides the wool industry with test methods for assessing various attributes of wool packs.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

4547.1:1999 Fibrillation of woven, HDPE fabric


Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

4547.2:2004 Adhesion of wool to anti-slip coating


Specifies a procedure for determining whether wool will adhere to an antislip wool pack coating.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

4547.3:2004 Surface frictional properties of fabric


Specifies a method for determining the surface frictional properties of wool pack fabric in wet and dry conditions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4547.4:2004 Handling resistance


Specifies a procedure for determining the force required to continue to pull a rod through a specimen of woven fabric.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4547.5:2004 Strength of fabric after exposure to ultraviolet radiation


Specifies a procedure for determining loss in strength of wool pack fabric specimens after exposure to ultraviolet light at elevated
temperatures.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS/BS 4548:1987 (Withdrawn)

AS/NZS 4548:- Guide to long-life coatings for concrete and masonry

4548.1:1999 Wall coatings - Latex extensible


Provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on
concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages
4548.2:1999 Latex finish coatings - High-build, low profile
Provides a guide to the features and typical characteristics of long-life, high-build, low profile latex type finish protective coatings that
are intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the
manufacturer's instructions.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

4548.3:1999 Latex - Textured coatings - Non-aggregate


Provides a guide to the features and typical characteristics of long-life textured coatings, which do not utilize aggregates, intended for
exterior or interior use on concrete and masonry, when applied by airless spray, hopper spray or roller in accordance with the
manufacturer's instructions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

4548.4:1999 Latex - Textured coatings - Aggregate filled


Provides a guide to the features and typical characteristics of long-life, aggregate filled, textured coatings intended for exterior or
interior use on concrete and masonry, when applied by textured roller, hopper spray or trowel in accordance with the manufacturer's
instructions.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

4548.5:1999 Guidelines to methods of test


Provides guidelines for a series of test methods for long-life coatings for concrete and masonry including tests for concrete cure,
water transmission, water vapour transmission, carbon dioxide diffusion, chloride ion diffusion and crack bridging abilities.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS 4551:1974 (Withdrawn)

NZS 4561:1973 (Superseded by NZS 4512:1994)

AS/NZS 4576:1995 Guidelines for scaffolding


Gives practical guidance for the training and certification of scaffolders, the preparation of sites for scaffolding, and the safe
selection, supply, erection, alteration, dismantling, maintenance, inspection and use of scaffolding and scaffolding equipment.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 144 pages

AS/NZS 4577:1999 Micrographics - Readers for transparent microforms - Performance characteristics


Specifies the essential performance characteristics for readers with magnification less than or equal to 50:1 with black and white
microfilm to a maximum width of 35 mm. It also specifies the performance of readers for roll microfilm, microfiche and image cards.
This Standard is identical with and has been reproduced from ISO 6198:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 4578:1999 Micrographics - Readers for transparent microforms - Measurement of characteristics


Specifies methods and instruments for measuring the characteristics for readers specified in AS/NZS 4577:1999 (ISO 6198). It
applies to magnification, resolution, distortion, screen luminance, screen contrast and film gate temperatures. This Standard is
identical with and has been reproduced from ISO 7565:1993.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

AS/NZS 4579:1999 Micrographics - Reader-printers for transparent microforms - Characteristics


Specifies the essential performance characteristics for reader-printers designed for viewing and making hard copies from microfilm
with a maximum width of 35 mm. It applies to reader-printers with a magnification less than or equal to 50:1. This Standard is
identical with and has been reproduced from ISO 10197:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages
AS/NZS 4580:1999 Medical electrical equipment - Digital imaging and communications in medicine (DICOM) -
Radiotherapy objects
Defines a number of information objects applicable to the domain of radiation oncology to support the transfer of radiotherapy related
data between devices within or outside of a radiotherapy department. It is identical with and has been reproduced from IEC
61852:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 82 pages

NZS/BS 4581: (Withdrawn)

AS/NZS 4581:1999 Management system integration - Guidance to business, government and community
organizations
Describes the components of a generic management system which are applicable to all sizes and types of organizations. Each
component describes what needs to be done but leaves the `how` up to each organization. A major advantage of such a system is
that it can apply to all aspects of an organization`s activities such as quality management, environmental management, occupational
health and safety management and human resource management. The specific requirements for such activities can be added. The
advantage of the generic management system approach is the potential for improving effectiveness and efficiency as well as overall
improvement of business operations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

AS/NZS 4582:2004 MF and HF radiocommunications equipment in the international maritime mobile


radiotelephone service
States the minimum requirements for radio transmitters and receivers, for use on ships, operating in either the Medium Frequency
(MF) only or in the Medium and High Frequency (MF/HF) bands allocated in the International Telecommunications Union (ITU)
Radio Regulations [1], to the Maritime Mobile Service (MMS). An adoption with modifications of ETS 300 337:1995.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 49 pages

AS/NZS 4583:1999 Amplitude modulated equipment for use in the aeronautical radio service in the frequency
range 118 MHz to 137 MHz
Specifies the minimum radiofrequency requirements for radiocommunication equipment intended to operate in the aeronautical radio
services in the frequency range 118 MHz to 137 MHz using amplitude modulation and 25 kHz channel spacing. The Standard
includes essential requirements and test methods for transmitters and receivers. It has been developed from Air Services Australia
specification YSCE 3078 Issue 1 and Ministry of Commerce (NZ) specification RFS 1.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4584(Int):1999 (Expired Interim Standard)

AS/NZS 4585:- Low styrene emission resins

4585.1:1999 Determination of styrene evaporation from unsaturated polyester and vinyl ester resins
Sets out a method for measuring the rate of loss of styrene from contact moulded materials and to define what constitutes a low
styrene emission resin.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4585.2:1999 The assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl
ester resin - Glass fibre laminates
Sets out a method for assessing the interlaminar adhesion in typical contact moulded chopped strand mat laminates.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials


Provides users and specifiers of pedestrian surface materials (architects, engineers, ergonomists, facility managers, manufacturers
and the like) with means for classifying such surfaces according to their pedestrian slip resistance for use in the selection of
surfaces.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 40 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4589:1999 Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type


microfilm - Operating procedures
Establishes general principles for document filming on 16 mm and 35 mm silver-gelatin type microfilm, including orientation of
images on film, and the area for codes. It includes the information required to facilitate identification, classification, testing and
subsequent use of the microfilm. It applies to rotary and planetary microfilming. It is based on, but not equivalent to, and has been
reproduced from ISO 6199:1991.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 18 pages

AS/NZS 4592:2005 Latex barrier membranes (dams) for prophylactic use in sexual activity
Specifies requirements for latex barrier membranes (dams) for prophylactic use including allowable materials, dimensions, surface
finish, taste and smell, thermal stability, packaging and labelling as well as physical properties such as elongation and tear and
rupture resistance. These differentiate prophylactic dams from other barrier products such as dental dams, which are not intended
for, and may not be suitable for use in, sexual situations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4598:- Guide to the development of application software

4598.1:1999 Software user documentation


Provides designers of application software with guidelines for the design and preparation of user documentation for application
software covering what information users need, how to decide what information should be provided (on paper and on-screen) and
how to prepare the relevant documentation. This Standard is identical with and has been reproduced from BS 7649:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 10 pages

4598.2:1999 On-screen documentation


Provides designers of application software with guidelines for the design and preparation of user documentation for on-screen,
covering content, navigation, style and presentation. This Standard is identical with and has been reproduced from BS 7830:1996.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 100 pages

AS/NZS 4600:2005 Cold-formed steel structures


Sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet,
strip, plate or bar not more than 25 mm in thickness and used for load-carrying purposes in buildings.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 152 pages

AS/NZS 4600, Supplement 1:1998 Cold-formed steel structures - Commentary


Provides background information and guidance to the requirements of AS/NZS 4600:1996.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 115 pages

NZS 4601:1971 (Withdrawn)

AS/NZS 4601:1999 Vehicle immobilizers


Sets out requirements for the design, testing and installation of vehicle security immobilizer systems for road vehicles.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
NZS 4602:1988 Low pressure copper thermal storage electric water heaters
Applies to the design, materials, construction, thermal insulation and performance of thermostatically controlled heaters of 6.5 to 450
L capacity designed for pressures up to 120 kPa (12 mH2O), installed in a vertical position either open-vented to NZS 4603 or valve-
vented to NZS 4607.
Reprinted to append Amendment 1:1990
Cited in BIA Approved Document G12/AS1; Energy Efficiency (Energy Using Products) Regulations 2002
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4602:1999 High visibility safety garments


Specifies the visual requirements for high visibility safety garments to be worn by people in situations where they may be exposed to
hazard from moving traffic or from moving plant or equipment in charge of an on-board controller. The Standard covers garments
suitable for daytime wear, night-time wear where they will be seen by retroreflected light or for wear under both conditions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders
(open-vented systems)
Applies to the installation in the vertical position of thermal storage electric water heaters complying with NZS 4602 and designed to
work on pressures not exceeding 120 kPa (12.0 m head). It is restricted to systems with open vents. Applies also to hot water
reticulation systems, to dual systems, and to the use of wetbacks or similar water heaters which supply hot water to the cylinder,
supplementing the heat derived from the electric element. Solar assisted systems are not covered.
Reprinted to append Amendment 1:1990
Cited in BIA Approved Document G12/AS1
$59.95+GST (Members), $74.94+GST (Retail), 22 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4604:1990 Dairy-type thermal storage electric water heaters


Applies to the design, materials, construction and performance of thermostatically controlled dairy-type thermal storage electric water
heaters of 150 to 450 litres capacity. Insulation requirements and basic constructional requirements are aligned with those of NZS
4602 and/or NZS 4606.
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

AS/NZS 4604:1999 (Withdrawn)

NZS 4605:1978 (Withdrawn)

AS/NZS 4605:1999 (Withdrawn)

NZS 4606:- Storage water heaters

Part 1:1989 General requirements


Specifies general constructional and performance requirements for storage water heaters of 6.5 L to 630 L capacity other than those
covered by NZS 4602. Also specifies the allowable heat loss, the provision of user-adjustable means of temperature control, and
routine and type test schedules. Gas-fired water heaters are specified by reference to the AGA/ALPGA Codes. The Standard is
based on Australian Standard AS 1056: Part 1.
Approved electrical safety Standard; Reprinted to append Amendments 1, 2 & 3
Cited in BIA Approved Document G12/AS1; Energy Efficiency (Energy Using Products) Regulations 2002
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1991 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1991 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1993 $29.95+GST (Members), $37.44+GST (Retail)

Part 2:1989 Specific requirements for water heaters with single shells
Specifies constructional requirements for water containers (shells) made of single materials, viz. plastics, copper or copper alloys, or
stainless steel, but excluding low pressure water heaters with copper cylinders within the scope of NZS 4602. Gives
recommendations on maximum water temperature and specifies routine and type test schedules. Identical to AS 1056.2-1985 with
modifications for New Zealand conditions.
Approved electrical safety Standard
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 6 pages
Amendment A, 1989 $29.95+GST (Members), $37.44+GST (Retail)

Part 3:1992 Specific requirements for water heaters with composite shells
Specifies constructional requirements for water containers (shells) made of composite materials, viz. steel with a copper or copper
alloy insert (inner liner), or steel with a bonded inner lining of vitreous enamel or of plastics material. Gives recommendations on
maximum water temperatures, specifies methods of testing the quality of inner linings, and also routine and type test schedules.
Identical to AS 1056.3-1991 with modifications for New Zealand conditions.
Approved electrical safety Standard
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 13 pages
Amendment A, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4607:1989 Installation of thermal storage electric water heaters: valve-vented systems
Applies to installation in domestic and light commercial establishments of thermal storage water heaters complying with NZS 4602
and NZS 4606 fitted with a pressure relief valve instead of an open vent. (For open vented systems see NZS 4603.) Referenced in
BIA Approved Document G12.
Cited in BIA Approved Document G12/AS1
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

NZS 4608:1992 Control valves for hot water systems


Sets out the design, construction, performance and testing requirements of valves for pressure control, expansion control, pressure
relief, vacuum relief, temperature relief and non-return functions. Applies to systems with static supply pressures up to 1600 kPa
(163 mH2O) and working pressures up to 500 kPa (51 mH2O) with temperatures not normally exceeding 85 degrees C, installed to
NZS 4603 and 4607. Referenced in BIA Approved Document G12.
Cited in BIA Approved Document G12/AS1
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4609:1999 Specification for water disinfection tablets - Iodine releasing


Sets out requirements for iodine releasing water disinfection tablets for use by individuals to disinfect small amounts of water from
untreated water supplies and water of unknown qualities.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

NZS 4610:1982 (Superseded by AS/NZS 1546.1:1998 and AS/NZS 1547:2000)

AS/NZS 4610:- Furniture - School and educational

4610.2:1999 Chairs - Strength, durability and stability


Specifies requirements for strength, durability and stability of chairs for school and educational use.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 42 pages

4610.3:1999 Tables and storage furniture - Strength, durability and stability


Specifies requirements for strength, durability and stability of tables and storage furniture for school and educational use.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages

NZS 4611:1982 Non-thermostatic shower mixing valves


Covers the performance, materials and installation of non-thermostatic shower mixing valves. The nominal sizes covered are 15 mm
and 20 mm (0.5 in and 0.75 in) corresponding to the size of the thread of the inlet connections. Preferred direction of operation is
given.
Reprinted to append Amendment 1:1990
$39.95+GST (Members), $49.94+GST (Retail), 4 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)

NZS 4613:1986 Domestic solar water heaters


Specifies solar collectors and ancillary equipment for systems with or without auxiliary heating. Annual performance of complete
systems is estimated approximately using a 3 - 4 day test procedure or assessed reliably using a 30 day test.
Cited in BIA Approved Document G12/AS1
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

AS/NZS 4613:1999 Automotive brake testing equipment - Roller brake tester


Specifies minimum performance requirements for fixed and mobile roller brake testers for light (excluding single track vehicles) and
heavy vehicles designed for normal on-road use.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

NZS 4614:1986 Installation of domestic solar water heating systems


Covers installation of systems of fixed orientation and inclination of up to 6 m2 collector area and 450 L storage capacity, capable of
auxiliary heating and delivering potable water, but excluding space or pool heating.
Reprinted to append Erratum 1:1986
$64.95+GST (Members), $81.19+GST (Retail), 34 pages
Erratum: 1 1986

NZS 4616:1990 (Superseded by AS/NZS 1730:1996)

AS/NZS 4616:1999 Abrasive grains and crudes - Chemical analysis of silicon carbide
Specifies a method for determining surface impurities of abrasive grains and the silicon carbide content of crushed crude when the
silicon carbide content is greater than 95 percent by weight. This Standard is identical with and has been reproduced from ISO
9286:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

NZS 4617:1989 Tempering (3-port mixing) valves


Covers requirements for tempering valves for storage hot water systems particularly in domestic situations where hot water poses a
hazard. These valves are intended to prevent scalding in locations such as homes, schools, motels and residential premises, where
ideally all hot water outlets should be sourced from a tempering valve. Provides for valves suitable for water inlet temperatures of up
to 100 degrees C.
Cited in BIA Approved Document G12/AS1
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

NZS/BS 4617:1983 (Withdrawn)

NZS/BS 4620:1970 (Withdrawn)

AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels -
General requirements and test methods
Provides general requirements and test methods for manufacturers, testing authorities and certifying bodies concerned with electrical
apparatus for the measurement of the concentration of oxygen and toxic levels of gases and vapours.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages
Amendment 1, 2008 $24.95+GST (Members), $31.19+GST (Retail)

AS/NZS 4645 Gas distribution networks

AS/NZS 4645.1:2008 Network management


Specifies performance-based requirements for a fuel Gas Distribution Network safety, defining important principles throughout the
life cycle of Gas Distribution Networks. The standard provides prescriptive, deemed to comply, means of compliance in support of
some of those requirements and allow for alternative means of compliance that may be also acceptable provided the required safety
outcomes can be demonstrated.
$129.95+GST (Members), $162.44+GST (Retail), 89 pages

AS/NZS 4645.2:2008 Steel pipe systems


To provide for the protection of the general public, gas distribution network operating personnel and the environment, and to ensure
safe and reliable operation of gas distribution networks that reticulate gas to consumers. It covers steel piping within gas distribution
networks covered by AS/NZS 4645.1, where the maximum allowable operating pressures up to or equal to 1050 kPa and the hoop
stress is less than or equal to 20% SMYS of the pipe. Steel piping systems for gas outside these limits are generally covered by the
AS 2885 suite of Standards and for some jurisdictions. AS/NZS 4645.1 provides for limited use up to 1965 kPa.
$99.95+GST (Members), $124.94+GST (Retail), 40 pages

AS/NZS 4645.3:2008 Plastics pipe systems


Provides more detailed requirements for design, materials, construction, testing and commissioning of plastic mains and services
within a network and is to be used together with Part 1. It covers gas distribution networks covered by Part 1 of this Standard for
operating pressures up to 600 kPa.
$99.95+GST (Members), $124.94+GST (Retail), 48 pages

AS/NZS 4659:- Guide to determining the equivalence of food microbiology test methods

4659.1:1999 Qualitative tests


Sets out guidelines for determining the equivalence of food microbiological test methods on qualitative tests. The protocol outlined in
this Standard may be used to determine whether an alternate method will yield a result equivalent to an Australian Standard or to a
Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards), the result for which is
reported as `detected' or `not detected'.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

4659.2:1999 Quantitative tests


Sets out guidelines for determining the equivalence of food microbiological test methods on quantitative tests. The protocol outlined
in this Standard may be used to determine whether an alternate enumeration method will yield an equivalent result to an Australian
Standard or to a Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards).
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

4659.3:1999 Confirmation tests


Sets out guidelines for determining the equivalence of food microbiological test methods on confirmation tests. The protocol outlined
in this document may be used to determine whether an alternate method will yield a result equivalent to an Australian Standard or to
a Joint Australian/New Zealand Standard food microbiology method (AS1766/AS/NZS 1766 series Standards), for confirmation tests
using a pure culture.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

4659.4:1999 Antibiotic tests


Sets out guidelines for determining the equivalence of food microbiological test methods on antibiotic tests. The protocol outlined in
this document provides guidance on the framework and basis for the evaluation/validation of microbial inhibitor tests, which allows
the comparison of data evaluated for different tests.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfaces


Provides users, maintenance organizations and facility managers with standardized methods of testing existing in situ pedestrian
surface materials for determination of their slip resistance.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4665 Performance of external power supplies


AS/NZS 4665.1:2005 Test method and energy performance mark
Specifies a test method for assessing the energy efficiency of external power supplies and includes information on the energy
performance mark.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4665.2:2005 Minimum energy performance standard (MEPS) requirements


Specifies minimum energy performance standards (MEPS) for single output voltage external supply units and an energy marking
system.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4666:2000 Insulating glass units


Sets out requirements and guidelines for the selection and installation of insulating glass units in buildings.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages

AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass


Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and
wired glass for general glazing and/or further processing.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 4668:2000 Glossary of terms used in the glass and glazing industry
Provides manufacturers, suppliers and users of glass with definitions of the terms used in the glass and glazing industry, specifically
in building applications, and includes definitions of the terms used in glass-related Australian and New Zealand Standards.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 43 pages

AS/NZS 4671:2001 Steel reinforcing materials


Sets out specifications for Australian and New Zealand Steel reinforcing materials (bars, coils and welded mesh). Requirements for
chemical, mechanical and physical properties for three different strength grades and the three different ductility classes are also
covered.
Reprinted to append Amendment 1:2003
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 33 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4672 Steel prestressing materials

4672.1:2007 General requirements


Provides a single specification for material requirements for as-drawn wire, stress-relieved wire, quenched and tempered wire,
strand, and hot-rolled steel bars, intended for use in prestressed concrete structures which have been designed in accordance with
AS 3600, Concrete structures or NZS 3101.1, Concrete structures Standard, Part 1: The design of concrete structures.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

4672.2:2007 Testing requirements


Sets out the frequency of material testing necessary to ensure compliance with the requirements of AS/NZS 4672.1.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4673:2001 Cold-formed stainless steel structures


Sets out requirements for the design of cold-formed stainless steel structural members. Steels for use with this Standard include
those specified by a wide range of international Standards. Members may be shaped from annealed or temper-rolled sheet, strip,
plate or flat bar.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 126 pages

AS/NZS 4676:2000 Structural design requirements for utility services poles


Sets out minimum loads and requirements for strength, serviceability to be used in the structural design or assessment of individual
poles supporting one or more utility services such as street lighting. Covers poles constructed of timber, steel and concrete, with
provisions for other materials of construction, and allows design by calculation or by prototype testing. Intended as a structural
design reference for standard specifications for poles constructed from a particular material.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 81 pages

AS/NZS 4677:2000 Steel utility services poles


Specifies minimum requirements for the materials, design, fabrication and erection of steel utility services poles. It is intended to be
used in conjunction with the forthcoming issue of AS 4676, Structural design requirements for utility services poles.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles


Specifies requirements and tests for hot-dip zinc coatings on fabrications, assembled steel products, tubular fabrications, fabricated
wire work, steel forgings, steel stampings, ferrous castings, nails and small components.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

AS/NZS 4681:2000 The storage and handling of Class 9 (miscellaneous) dangerous goods and articles
Sets out requirements and recommendations for the safe storage and handling of Class 9 (miscellaneous) dangerous goods and
articles, in packages, IBCs and bulk. Advice is given on fire protection, waste disposal, operations and personnel safety. Guidelines
for emergency procedures are also provided.
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 57 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4688:- Furniture - Fixed height chairs

4688.1:2007 Human-interface and general requirements


Sets out the dimensional requirements and general requirements for chairs (excluding lounge chairs) of fixed height with either fixed
or swivel bases, intended to seat one person in an upright position (such as when sitting at a desk or table).
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 16 pages

4688.2:2000 Determination of strength and durability


Specifies strength and durability requirements for chairs of fixed height and either fixed or swivel bases, in order to provide
purchasing authorities, specifiers, users, retailers and manufacturers with a uniform set of performance requirements that can form
the basis of selection and evaluation criteria. This Standard is reproduced from ISO 7173:1989 with variations for Australia and New
Zealand in an appendix.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages

4688.3:2000 Determination of stability - Upright chairs


Specifies stability requirements for chairs of fixed height and either fixed or swivel bases, in order to provide purchasing authorities,
specifiers, users, retailers and manufacturers with a uniform set of performance requirements that can form the basis of selection
and evaluation criteria. This Standard is identical with and has been reproduced from ISO 7174-1:1988.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

4688.4:2000 Determination of stability - Chairs with tilting or reclining mechanisms when fully reclined
and rocking chairs
Specifies stability requirements for chairs of fixed height and either fixed or swivel bases and which have tilting or reclining
mechanisms, in order to provide purchasing authorities, specifiers, users, retailers and manufacturers with a uniform set of
performance requirements that can form the basis of selection and evaluation criteria. This Standard is identical with and has been
reproduced from ISO 7174-2:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

AS/NZS 4692 Electric water heaters

4692.1:2005 Energy consumption, performance and general requirements


Includes performance test procedures, minimum performance requirements and a range of other requirements for water heaters. It
also includes the revised test method for the determination of standing heat loss for electric storage water heaters, and the method
for the determination of hot water delivery and mixed hot water delivery.
Will supersede NZS 4602:1998 and NZS 4606 Parts 1-3 at a date yet to be determined
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 76 pages

4692.2:2005 Minimum Energy Performance Standard (MEPS) requirements and energy labelling
Specifies the Minimum Energy Performance Standards (MEPS) requirements for various water heaters within the scope of AS/NZS
4692.1. It also includes target values for maximum heat loss for a range of other types of electric water heaters and information
regarding a label that identifies certain types of water heaters with low heat loss.
Will supersede NZS 4602:1988 and NZS 4606.1:1989 at a date yet to be determined
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 34 pages

AS/NZS 4695:- Fire hazard testing of electrotechnical products

4695.1.1:1997 (Superseded by AS/NZS 60695.1.1:2001)

4695.2:- Test methods

4695.2.2:1996 (Superseded by AS/NZS 60695.11.5:2005)

4695.2.10:1996 (Superseded by AS/NZS 60695.2.10:2001)

4695.2.11:1996 (Superseded by AS/NZS 60695.2.11:2001)

4695.2.12:1996 (Superseded by AS/NZS 60695.2.12:2001)

4695.2.13:1996 (Superseded by AS/NZS 60695.2.13:2001)

4695.2.40:1996 (Withdrawn)

4695.2.41:1996 (Superseded by AS/NZS 60695.11.2:2004)

4695.4:1996 (Superseded by AS/NZS 60695.4:2002)

4695.5.1:1996 (Withdrawn)

4695.7.1:1996 (Withdrawn)

4695.10.2:1997 (Superseded by AS/NZS 60695.10.2:2002)

4695.112:1996 (Superseded by AS/NZS 60112:2003)

4695.707:1996 (Superseded by AS/NZS 60695.11.10:2001 and AS/NZS 60695.11.20:2001)

4695.829:1996 (Withdrawn)
AS/NZS 4700: (Withdrawn)

NZS 4701:1981 (Superseded by AS/NZS 1554.1:1995)

AS/NZS 4701:2000 Requirements for domestic electrical appliances and equipment for reconditioning or parts
recycling
Sets out general requirements applying to used domestic appliances intended for sale for reconditioning (reuse), salvaging of parts
only (recycling), (or in New Zealand, historic collections), so that an appropriate safety outcome for the public is achieved without
preventing the recycling or resale of electrical appliances or parts which may not be safe to use.
Cited in Electricity Regulations 1997
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 4 pages

NZS 4702:1982 Metal-arc welding of grade 275 reinforcing bar


Covers the workmanship, materials, equipment and testing required for the joining together of Grade 275 steel reinforcing bars by
manual metal-arc welding, semi-automatic or automatic gas-shielded or flux cored metal-arc welding. Three levels of weld
acceptance are specified.
$44.95+GST (Members), $56.19+GST (Retail), 23 pages

NZS 4703:1985 Welder qualification tests for stainless steel pipe for the dairy industry
Applies to the qualification testing of welders to establish their competency in MIG, TIG and Arc plasma welding of stainless steel
pipework to meet the hygiene requirements of the dairy industry. Is not intended to cover the welding of pressure pipework. The test
consists of: (a) A butt joint in pipe, and (b) branch connection in pipe, both welded from one side without backing.
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

NZS 4703(Certificate):1985 Certificate of competency for welding of stainless steel pipe for the dairy industry
50 copies of the Certificate of Competency for welding of stainless steel pipe for the dairy industry.
$44.95+GST (Members), $56.19+GST (Retail), 50 pages

AS/NZS 4703:2007 Electrical wiring in furniture


Specifies general requirements for electrical wiring systems (other than communications wiring) in furniture (and similar fitments) that
are connected to an electrical installation.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

NZS 4703:1984 Welder qualification tests for stainless steel pipe for the dairy industry - Welder`s test data
sheets
Pad of 50 copies of the qualification test data sheet for stainless steel pipe welds.
$34.95+GST (Members), $43.69+GST (Retail), 50 pages

NZS 4704:1994 (Superseded by AS/NZS 1554.1:1995)

NZS 4711:1984 Qualification tests for metal-arc welders


Applies to the qualification testing of welders to establish their competency in manual, semi-automatic or automatic metal-arc welding
of weldable steels. Tests are specified for welding of plate and/or tubing, and test certificates may have a validity of 1, 2 or 3 years.
Requirements for test authorities and their staff are specified.
Reprinted appending Amendment 1
$49.95+GST (Members), $62.44+GST (Retail), 31 pages
Amendment 1, 1986 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4713:2002 Ultrasonics - Physiotherapy systems - Performance requirements and methods of


measurement in the frequency range 0.5 MHz to 5 MHz
Specifies performance requirements for ultrasonic equipment designed for physiotherapy, consisting of an ultrasonic transducer
generating continuous or quasi-continuous wave ultrasonic energy in the frequency range 0.5 MHz and 5 MHz. It modifies, and has
been reproduced from, IEC 61689:1996 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 54 pages

AS/NZS 4714:2000 Ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
Specifies a method of determining the total radiated acoustic power of ultrasonic transducers being used to test the calibration of
ultrasound physiotherapy equipment. This Standard is identical with and has been reproduced from IEC 61161:1992 and its first
Amendment (1998).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4724:2000 (Superseded by AS/NZS 4819:2003)

AS/NZS 4737:2002 Motor vehicles - "I" beam steer axle camber adjustment
Provides minimum requirements for "I" beam steer axle adjustment procedures. Should be used in conjunction with any
National/Federal, State or Territory regulations or rules. The procedures in this Standard are not designed to correct problems
arising from accident damage to axles.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4740:2000 Natural ventilators - Classification and performance


Specifies minimum requirements for ventilators designed to provide ventilation of enclosures by means of the natural flow of air. This
Standard includes classification, performance and marking requirements. It also includes appendices outlining the performance test
methods. This Standard does not apply to electrically powered ventilators or to smoke and heat exhaust ventilators.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 41 pages

AS/NZS 4745:2004 Code of practice for handling combustible dusts


Outlines measures and practices to assist those industries which may have risks associated with the presence of combustible dusts
as part of their processes; it also assists such industries in minimizing the risk of injury, death or loss of property to fire and/or
explosion through the application of good design and management principles and practices in the construction, operation and
maintenance of manufacturing and processing plants and associated transportation and storage systems.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 77 pages

AS/NZS 4757:2002 Handling and destruction of drugs


This Standard describes the processes and procedures for the seizure, handling, storage, disposal and destruction of drug and
drugs related materials for the use of law enforcement agencies and regulatory agencies.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

NZS/BS 4758:1986 (Withdrawn)

AS/NZS 4761 Competencies for working with electrical equipment for hazardous areas (EEHA)

AS/NZS 4761.1:2008 Competency Standards


Specifies the competencies required for work associated with electrical equipment for hazardous areas (commonly termed ‘Ex’
equipment) and the standards to which competency is to be assessed and attributed. The competencies specified in this Standard
are intended as additional competencies to those previously acquired.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 136 pages

AS/NZS 4761.2:2008 Guide to assessing competency


This Standard provides guidance on assessing competency based on the knowledge and skills that define the Unit
Standards(NZ)/Units of Competency(AUS) described in Part 1.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 44 pages

4761.3(Int):2000 (Superseded by AS/NZS 4761.1:2003 (in part) and AS/NZS 4761.2:2003 (in part))

4761.4(Int):2000 (Superseded by AS/NZS 4761.1:2003 (in part) and AS/NZS 4761.2:2003 (in part))

AS/NZS 4763(Int):2006 Safety of portable inverters


Applies to single-phase or polyphase, air-cooled (natural or forced) portable inverters having a rated supply voltage not exceeding 60
V ripple-free d.c. and an alternating current (a.c.) output where the rated output does not exceed 3 kVA; the rated output voltage is
within the range 50 – 500 V a.c; and the rated frequency of the output is within the range 40 – 100 Hz. It is applicable to isolated
inverters, equipotentially bonded inverters and RCD protected inverters for household and similar use, use on construction sites, or
providing an independent supply to electrical installations in buildings, vehicles, caravans, boats and the like. Inverters may be fitted
with terminals for the connection of d.c. supply, an external flexible cord fitted with battery clips, an automobile cigarette lighter plug
or other d.c. plug.
Interim Standard - Expires 20 October 2010. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years). Reprinted to incorporate
Amendment 1:2009
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 83 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications


Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under
pressure.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

NZS/ISO 4766:1983 (Withdrawn)

AS/NZS 4766:2006 Polyethylene storage tanks for water and chemicals


Specifies requirements for the design and manufacture of polyethylene storage tanks that are rotationally moulded in one-piece
seamless construction. The tanks are for non-buried, vertical installation and capable of containing water, liquids used in food and
beverage manufacture and chemical solutions at atmospheric pressure.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

AS/NZS 4768:- Digital radio equipment operating in land mobile and fixed services bands in the frequency
range 29.7 MHz to 1 GHz

4768.1:2006 Radiofrequency requirements


Provides the user, manufacturer or supplier of digital radio equipment operating in the frequency range 29.7 MHz to 1 GHz of the
VHF and UHF Land Mobile and Fixed Services Bands with the minimum technical performance characteristics and requirements
necessary to contribute to effective management of the radiofrequency spectrum in Australia and New Zealand.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

4768.2:2003 Methods of test


Provides the test methods to be used for establishing compliance with the minimum radiofrequency requirements for operation of the
equipment in Australian and New Zealand. Reproduced from IEC 60489-6:1999 with additions and modifications.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 157 pages

AS/NZS 4769:- Radiocommunications equipment used in the paging service


4769.1:2000 Angle modulated equipment
Specifies the minimum radiofrequency requirements for angle modulated radio communication equipment intended to operate in the
paging service. It includes requirements and test methods for transmitters and receivers. This Standard is an adoption, with national
modifications, of ETS 300 224:1998. An appendix sets out variations to ETS 300 224 for application in the Australian and New
Zealand radiocommunications environment.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 65 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

4769.2:2000 Amplitude modulated equipment


Specifies the minimum radiofrequency requirements for amplitude modulated radio communications equipment intended to operate
in the paging service and includes essential requirements and test methods for transmitters and receivers operating in the 27 MHz
and 40 MHz bands.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single
sideband suppressed carrier emission
Specifies radiofrequency requirements for medium frequency and high frequency radiocommunications equipment intended to
operate in the land mobile services and utilizing single sideband suppressed carrier emission. It specifies minimum requirements for
transmitters and receivers for use of the radiofrequency spectrum in accordance with spectrum planning.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 15 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4771:2000 Technical characteristics and test conditions for data transmission equipment operating in
the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation
techniques
Specifies the minimum radiofrequency requirements for spread spectrum modulated radiocommunications equipment compliance,
including essential requirements and test methods for transmitters and receivers operating in the 900 MHz, 2.4 GHz and 5.8 GHz
bands. This Standard is an adoption, with national modifications, of ETS 300 328:1996. Appendices set out variations to ETS 300
328 for application in the Australian and New Zealand radiocommunications environment.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 9 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4776 Liquid-chilling packages using the vapour compression cycle

AS/NZS 4776.1 Method of rating and testing for performance

AS/NZS 4776.1.1:2008 Rating


Prescribes the method of rating liquid-chilling packages using the vapour compression cycle to determine the capacity, power and
efficiency of equipment under a specific set of conditions. It is not the intent of this Standard to provide for testing in-field
installations, where steadystate and uniform conditions are difficult to achieve and provisions for measurements are not made.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

AS/NZS 4776.1.2:2008 Testing


Prescribes the method of testing liquid-chilling packages using the vapour compression cycle to determine the capacity, power and
efficiency of equipment under a specific set of conditions. It is not the intent of this Standard to provide for testing in-field
installations, where steadystate and uniform conditions are difficult to achieve and provisions for measurements are not made.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

AS/NZS 4776.2:2008 Minimum energy performance standard (MEPS) and compliance requirements
Provides industry in general, and manufacturers and suppliers of liquid-chilling packages specifically, with MEPS and high-efficiency
product performance levels.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 28 pages

AS/NZS 4778:2001 Electromagnetic compatibility for radiocommunications equipment


Specifies limits and tests for the assessment of radiocommunications and ancillary equipment with respect to electromagnetic
compatibility. This Standard is an adoption, with national modifications, of EN 300 339 1.1.1 (1998). An Annex sets out variations to
the ETSI Standard which apply in the Australian and New Zealand radiocommunications environment.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

AS/NZS 4780:2000 (Superseded by AS/NZS CISPR 14.2:2003)

NZS 4781:1973 Code of practice for safety in welding and cutting


Provides for the protection of persons from injury and illness and of property (including equipment) from damage by fire and other
causes arising from welding and cutting. Provides basic safety requirements for all welding and cutting, regardless of the field of
application, including construction work within the meaning of the Construction Act 1959. Specific provisions are included for gas
welding, metal-arc welding, brazing and resistance welding but no attempt has been made to include particular hazards which may
be inherent in special industries.
Reprinted to append Amendment 1:1976.
$34.95+GST (Members), $43.69+GST (Retail), 44 pages
Amendment 1, 1976 $29.95+GST (Members), $37.44+GST (Retail)

SNZ HB 4782.2:2001 (Superseded by AS/NZS 4782.2:2004)

AS/NZS 4782:- Double-capped fluorescent lamps - Performance specifications

4782.1:2004 General
Specifies performance requirements for double-capped fluorescent lamps for general lighting service. This document is an adoption
with modifications of IEC 60081:1997 and includes Amendment 1:2000 and Amendment 2:2003.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 176 pages

4782.2:2004 Minimum Energy Performance Standard (MEPS)


Specifies performance and energy efficiency specifications for tubular fluorescent lamps of length 550 mm to 1500 mm both inclusive
with wattage of 16 watts or more that are within the scope of AS/NZS 4782.1. Modified adoption of, and reproduced from, IEC
61347-2-11:2001.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

4782.3(Int):2006 Procedure for quantitative analysis of mercury present in fluorescent lamps


Specifies test method procedures for quantitative analysis of mercury present in general purpose fluorescent lamps that are intended
to be sold in Australia and New Zealand.
Interim Standard - Expires 5 June 2008. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4783:- Performance of electrical lighting equipment - Ballasts for fluorescent lamps

AS/NZS 4783.1:2001 Method of measurement to determine energy consumption and performance of ballasts
lamp circuits
Provides methods of measurement of ballast energy consumption and performance when used with associated fluorescent lamps as
part of luminaires and applies to those covered within the scope of IEC 60081 and IEC 60901. The common methods practiced in
major parts of the world, Europe in particular are prescribed in this Standard and relevant appendices. The tests specified are
derived from EN 50294 with significant restructuring and modifications. The scope of this Standard excludes self-ballasted lamps and
does not cover safety requirements.
Cited in Energy Efficiency (Energy Using Products) Regulations 2002
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4783.2:2002 Energy labelling and minimum energy performance standards requirements
Specifies classification, labelling and minimum energy performance requirements for ballasts for linear fluorescent lamps for use on
230 V to 250 V a.c. at 50 Hz supply. This Standard is to be read in conjunction with AS/NZS 4783.1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 4787:2001 Timber - Assessment of drying quality


Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality
classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scatter of moisture
contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS ISO 4789:2004 Information and documentation - International library statistics


Provides guidance for the library and information services community on the collection and reporting of statistics. Identical with, and
has been reproduced from ISO 2789:2003.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 60 pages

AS/NZS 4790:2006 Furniture - Storage units - Determination of strength and durability


Specifies test methods for determining the strength and durability of storage units that are fully assembled. Identical to and
reproduced from ISO 7170:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process
Specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces
except cut ends, using an in-line process that utilizes specialized equipment.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a
specialized process
Specifies requirements for the mass, quality and testing of hot-dip galvanized coatings applied to hollow sections galvanized on both
surfaces in a specialized plant; produced by welding pre-galvanized steel strip; and on external surfaces only, using a continuous (in-
line) process.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS 4798(Int):2005 Polyethylene maintenance shafts


Specifies requirements for the design and manufacture of non-person man entry polyethylene maintenance shafts intended for
buried sewerage systems at depths up to 6 m and diameters up to DN 300 comprising a moulded chamber and riser in one-piece
seamless construction or a moulded base jointed to an extruded pipe shaft manufactured from a compatible material.
Interim standard - expires 25 May 2007. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

NZS/BS 4800:1989 (Withdrawn)

AS/NZS 4801:2001 Occupational Health and Safety Management Systems - Specification with guidance for
use
The objective of this standard is to set auditable criteria for an occupational health and safety management system. The standard is
a specification that aims to encompass the best elements of such systems already widely used in Australia and New Zealand. It
includes guidance on how those criteria may be achieved. The standard should not be relied upon to ensure compliance with all
legal and other obligations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS 4802:- Information processing systems - Local area networks

4802.1:1996 Overview of local area network standards


Provides an introduction to the set of International Standards which describe local area networks, specifically those which make use
of the 48-bit address format. Identical to and reproduced from ISO/IEC TR 8802-1:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

4802.1, Supplement 1:1994 Overview of local area network standards


Defines the architecture for the interconnection of IEEE 802 type LANs below the level of the MAC service, which is transparent to
logical link control and higher layer protocols. Identical to and reproduced from ISO/IEC 10038:1993.
Supplement to AS 4802.1-1992; Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 163 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

4802.1, Supplement 2:1997 Overview of local area network standards - System load protocol
Specifies a set of services and protocol for those aspects of management concerned with the loading of systems on IEEE 802 type
LANs. Identical to and reproduced from ISO/IEC 15802-4:1994.
Supplement to AS/NZS 4802.1:1996
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 58 pages

4802.1, Supplement 3:1997 Overview of local area network standards - LAN/MAN management
Specifies and Open Systems Interconnection management-compatible architecture, and service and protocol elements for use in a
LAN/MAN environment for performing remote management. Identical to and reproduced from ISO/IEC 15802-2:1995.
Supplement to AS/NZS 4802.1:1996
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 83 pages

4802.2:1999 Logical link control


Specifies a description of the functions, features, protocol and services of the logical link control sublayer of the ISO/IEC 8802 LAN
protocol. This Standard is identical with and has been reproduced from ISO/IEC 8802-2:1998.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 239 pages

4802.3:1999 Carrier sense multiple access with collision detection access method and physical layer
specifications
Provides a specification for local area networks employing CSMA/CD as the access method which encompasses several media
types and techniques for signal rates from 1 Mb/s to 20 Mb/s, and provides the necessary specification and related parameter values
for 10 Mb/s and 1 Mb/s baseband implications. Specifications for 10BASE-T, 10BASE-FP, 10BASE-FB and layer management are
also included. This Standard is identical with and has been reproduced from ISO/IEC 8802-3:1996.
Joint Australian/New Zealand Standard
$309.95+GST (Members), $387.44+GST (Retail), 517 pages

4802.6:1996 Distributed queue dual bus access method and physical layer specifications
Specifies a high-speed shared medium access protocol for use over a dual, counter flowing, unidirectional bus network. This
includes the physical layer, logical link control and medium access control sublayers. Identical to and reproduced from ISO/IEC
8802-6:1994.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 363 pages

4802.7:1993 (Withdrawn)

4802.12:2000 Demand-priority access method, physical layer and repeater specifications


Specifies the demand-priority access method together with the related physical layer and repeater specifications. This Standard is
identical with and has been reproduced from ISO/IEC 8802-12:1998.
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 429 pages

AS/NZS 4804:2001 Occupational Health and Safety Management Systems - General guidelines on principles,
systems and supporting techniques
The objective of this Standard is to provide guidance on how an occupational health and safety management system (OHSMS) may
be set up; how it can be continually improved; and what resources may be used to do this.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

AS/NZS 4805:- Accessories for electric cables - Test requirements

4805.1:2007 Power cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and
including 19/33 (36) kV
Specifies the type test requirements on accessories for power cables with extruded insulation and with rated voltages from 1.9/3.3
(3.6) kV up to and including 19/33 (36) kV. An adoption with national modifications of IEC 60502-4 (2005-02).
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

4805.2:2007 Impregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV
up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables)
Specifies the type test requirements on accessories for impregnated paper-insulated metal-sheathed cables with rated voltages from
1.9/3.3 (3.6) kV up to 19/33 (36) kV (excluding gas-pressure and oil-filled cables). An adoption with national modifications of part of
IEC 60055-1 (2005-05).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

AS/NZS 4810:- Medical devices - Risk management

4810.1:2000 Application of risk analysis


Specifies a procedure for investigating, using available information, the safety of a medical device, including in vitro diagnostic
devices or accessories, by identifying hazards and estimating the risks associated with the device. Does not stipulate levels of
acceptability nor is it intended to give guidance on all aspects of management of risks. This Standard is identical with and has been
reproduced from ISO 14971-1:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 4812:2003 Non-destructive examination and discard criteria for wire ropes in mine winding systems
Specifies requirements for non-destructive examination and discard of wire ropes of mine winding systems, including winding,
hoisting, balance, rubbing, guide and shaft sinking ropes, but excluding full locked-coil ropes.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages

AS/NZS 4815:2006 Office-based health care facilities - Reprocessing of reusable medical and surgical
instruments and equipment, and maintenance of the associated environment
Provides procedures for cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and the
maintenance of associated environments as applicable to each profession.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 96 pages

AS/NZS 4819:2003 Geographic information - Rural and urban addressing


Specifies requirements for a comprehensive urban and rural addressing system for allocation, transfer and management of property
addresses. Takes into account data dictionary for transfer of street address systems and interchange of client information, and
includes geocoding. Guidelines for the use of the addressing system and examples of addressing are included.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 71 pages
Amendment 1, 2006 $39.95+GST (Members), $49.94+GST (Retail)

AS/NZS 4820:2001 (Withdrawn)

AS/NZS 4821:2006 Protective footwear for firefighters - Requirements and test methods
Provides minimum performance requirements for firefighters' footwear intended for firefighting and associated activities to enable the
manufacture and selection of footwear that does not melt or ignite when exposed to flame or risks to which firefighters may be
exposed.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS 4824:2006 Protective clothing for firefighters - Requirements and test methods for protective clothing
used for wildland firefighting
Provides the minimum requirements and test methods for assessing protective clothing that is intended to be worn during wildland
firefighting and associated activities, where there is a risk of heat and flame.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 24 pages

NZS/BS 4827:1972 (Withdrawn)

AS/NZS 4829:2006 Stand alone retail display devices (retail spinners)


Specifies stability requirements and strength and stability methods of testing for stand alone retail display devices (retail spinners).
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 4836:2001 Safe working on low-voltage electrical installations


Outlines principles and procedures of safe work, organization and performance on or near low-voltage electrical equipment. Provides
a minimum set of procedures, safety requirements and recommendations for a safe working environment on or near electrical
installations or systems.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 43 pages

AS/NZS 4844:- Wool - Measurement of fibre properties

4844.1(Int):2002 Measurement of the fibre length after carding of scoured or carbonised wool
Sets out a method for determining the fibre length after carding and gilling or scoured or carbonised wool, the wool initially being in
the form of LAC grab samples.
Interim standard - expires 24 July 2006. Reprinted to incorporate Amendment 1:2005. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

4844.2(Int):2002 Measurement of the fibre length after carding waste of scoured or carbonised wool
Sets out a method for determining the level of card waste produced during the LAC length test.
Interim standard - expires 24 July 2006. Reprinted to incorporate Amendment 1:2005. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4847 Self-ballasted lamps for general lighting services


4847.1(Int):2008 Test methods - Energy performance
Specifies test methods for key performance attributes of self-ballasted compact fluorescent lamps (CFLs) that have integrated
means for starting, controlling and stable operation.
Interim Standard - Expires 28 March 2010. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

4847.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements


Provides the basis for Minimum Energy Performance Standards (MEPS) requirements for compact fluorescent lamps sold in
Australia and New Zealand.
Interim Standard - Expires 7 April 2010. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

NZS/BS 4848:- Specification for hot-rolled structural steel sections

Part 2:1991 Hollow sections


Gives the requirements for dimensions, tolerances and sectional properties of hot finished structural steel hollow sections.
Reprinted incorporating Amendment 1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 16 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1993 $29.95+GST (Members), $37.44+GST (Retail)

Part 4:1972 Equal and unequal angles


Dimensions, rolling tolerances and properties of a co-ordinated metric range of equal and unequal angles. Two tables are included
giving those angles in the British Standard range, whilst appendix A gives those ISO angles not included in the British Standard
range.
Reconfirmed in 1995; Reprinted incorporating Amendments 1, 2 & 3
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 20 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, $29.95+GST (Members), $37.44+GST (Retail)

Part 5:1980 Bulb flats


Specifies the dimensions, tolerances and sectional properties of hot-rolled bulb flats with bulb on one side, in sizes ranging from 120
mm x 6 mm to 430 mm x 20 mm.
Adopted Standard
$66.67+GST (Members), $83.34+GST (Retail), 4 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4849:- Upholstery cleaning

4849.1:2003 Fabric upholstery


Provides guidelines for cleaning and maintenance for domestic and commercial fabric upholstery.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

AS/NZS 4853:2000 Electrical hazards on metallic pipelines


Provides voltage limits and corresponding time constraints acceptable on both underground and above-ground metallic pipelines that
may be subject to electrical influences due to the close proximity of high voltage power transmission lines. Guidance on how to
calculate the induced voltages and mitigate the hazards is provided. Hazards due to lightning strikes are covered.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 59 pages
AS/NZS 4854:2006 Welding consumables - Covered electrodes for manual metal arc welding of stainless and
heat-resisting steels - Classification
Specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of
electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated
conditions, for manual metal arc welding of stainless and heat-resisting steels. Identical to, and reproduced from, ISO 3581:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 4855:2007 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and
fine grain steels - Classification
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld
heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500
N/mm2 or a minimum tensile strength of up to 570 N/mm2. Identical to ISO 2560:2002.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

NZS/BS 4856:- Methods for testing and rating fan coil units, unit heaters and unit coolers

Part 1:1972 Thermal and volumetric performance for heating duties; without additional ducting
Deals with methods of carrying out thermal and volumetric tests on forced convection units containing fluid-to-air heat exchangers
and incorporating their own fans. The units are for heating applications and the tests are to be carried out on units in an essentially
clean condition.
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages

AS/NZS 4856:2006 Welding consumables - Covered electrodes for manual metal arc welding of creep-
resisting steels - Classification
Specifies requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual
metal arc welding of ferritic and martensitic creep-resisting and low alloy elevated temperature steels. Identical to ISO 3580:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

AS/NZS 4857:2006 Welding consumables - Covered electrodes for manual metal arc welding of high-strength
steels - Classification
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld
heat-treated condition for manual metal arc welding of high-strength steels. Identical to ISO 18275:2005.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 40 pages

AS/NZS 4858:2004 Wet area membranes


Classifies membranes based on elastic properties, which can then be used to give guidance on the type of detailing for a specific
membrane referred to in AS 3740.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 4859:- Materials for the thermal insulation of buildings

4859.1:2002 General criteria and technical provisions


Specifies requirements and methods of test for materials that are added to, or incorporated in, opaque envelopes of buildings, to
provide thermal insulation by moderating the flow of heat through these envelopes. Does not cover materials for the insulation of
equipment, building facilities, windows or other glazings.
Reprinted to incorporate Amendment 1: 2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 49 pages
Amendment 1, 2006 $39.95+GST (Members), $49.94+GST (Retail)

AS/NZS 4864 Performance of refrigerated beverage vending machines


AS/NZS 4864.1:2008 Test methods - Energy performance
Specifies methods of measurement of electrical power consumption of refrigerated beverages vending machines connected to a
nominal 230 V mains electricity supply.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS 4864.2:2008 Minimum energy performance standard (MEPS) requirements


Provides minimum energy performance levels for refrigerated beverages vending machines.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

AS/NZS 4865 Performance of commercial ice makers and ice storage bins

AS/NZS 4865.1:2008 Test methods for ice makers - Environmental performance


Specifies methods of measuring the electrical power consumption of water- and air-cooled commercial ice makers connected to a
nominal 230 V mains electricity supply.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

AS/NZS 4865.2:2008 Test methods for ice storage bins - Environmental performance
Specifies the method of measuring the theoretical storage effectiveness of factory-made ice storage bins, including the storage bins
of self-contained units and automatic dispensing machines.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

AS/NZS 4865.3:2008 Minimum energy performance standard (MEPS) requirements


Specifies minimum energy performance standard (MEPS) requirements for ice makers and ice storage bins within the scope of
AS/NZS 4865.1:2008 and AS/NZS 4865.2:2008.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 4867:- Cigarette lighters

4867.1:2002 General requirements


Provides requirements for cigarette lighters that ensure a reasonable degree of safety for normal use or reasonably forseeable
misuse, in order to reduce potential hazards to users. This standard is identical with and has been reproduced from ISO 9994:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 14 pages

4867.2:2002 Child resistance requirements


Provides requirements for assessing compliance with the US Consumer Product Safety Commission's requirements for child
resistance: 16 CFR CPSC 1210.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 4869 Maritime Survivor Locating Systems (MSLS)

4869.1:2006 Operating on 121.5 MHz


Provides the essential standards and minimum requirements for the design and construction of 121.5 MHz Maritime Survivor
Locating Systems.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 24 pages

AS/NZS 4871:- Electrical equipment for coal mines, for use underground

4871.1:2002 General requirements


Specifies the general design, manufacturing, testing and performance standards for all electrical equipment intended for use in
underground coal mines.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 41 pages
4871.2:2002 Distribution, control and auxiliary equipment
Specifies requirements for the design, construction and testing of distribution, control and auxiliary equipment for use in underground
coal mines. It does not specify general requirements of electrical equipment for underground coal mines, which is dealt with in Part 1
of this series.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

4871.3:2002 Substations
Specifies requirements for the design, construction and testing of substations for use in underground coal mines. It does not specify
general requirements of electrical equipment for underground coal mines, which is dealt with in Part 1 of this series.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

4871.4:2002 Mains powered electrical mobile machines


Specifies requirements for the design, construction and testing of electrical powered mobile machines for use in underground coal
mines. It does not specify general requirements of electrical equipment for underground coal mines, which is dealt with in Part 1 of
this series.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

4871.5:2002 Electrical equipment for coal mines - Part 5 Battery powered electrical mobile machines
Specifies requirements for the design, construction and testing of battery powered mobile machines for use in underground coal
mines. It does not specify general requirements of electrical equipment for underground coal mines, which is dealt with in Part 1 of
this series.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

4871.6:2007 Diesel powered machinery and ancillary equipment


Sets out requirements for the design, construction and testing of electrical systems associated with diesel powered mobile machines
for use in underground coal mines.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4879 Performance of transformers and electronic step-down convertors for ELV lamps

AS/NZS 4879.1:2008 Test method - Energy performance


Provides the industry, consumers, test laboratories, regulators and users of transformers and electronic step-down converters used
with ELV lamps with a test method to determine energy efficiency.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 48 pages

AS/NZS 4879.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements


Specifies Minimum Energy Performance Standards (MEPS) requirements and related attributes for self-ballasted compact
fluorescent lamps (CFLs) with integrated means for controlling starting and stable operation that are intended for domestic and
similar general lighting purposes. It applies to self-ballasted lamps of all voltages and wattages irrespective of the type of lamp cap.
Should be read in conjunction with AS/NZS 4847.1.
Interim Standard - Expires 30 June 2010
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

AS/NZS 4886:2007 Domestic solid fuel burning appliance - Pellet heaters - Determination of flue gas emission
Specifies a test method for determining the rate of particulate emission from domestic pellet burning appliances and the associated
particulate emission acceptance criteria.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

AS/NZS 4898:1997 (Superseded by AS/NZS 60898.1:2004)

NZS/ISO 4902:1980 (Superseded by AS/NZS 3612)


NZS/ISO 4903:1989 Information technology - Data communications - 15-pole DTE/DCE interface connector and
contact number assignments
Specifies the 15-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and
data circuit-terminating equipment (DCE) where CCITT Recommendations X.24, X.26 and X.27 are applicable. Provides the
dimensions of the connector housing, as well as the recommended means of providing a locking device (latching block) and
connector shielding. Identical to and reproduced from AS 3613-1989.
Adopted Standard
$161.40+GST (Members), $201.75+GST (Retail), 17 pages

AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation
Sets out general conditions of contract for the supply of equipment which is purpose-built or manufactured, including equipment such
as building elements. Where equipment is being supplied for use at different times or stages, separable portions may be appropriate.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 4929: (Withdrawn)

AS/NZS 4934 Incandescent lamps for general lighting service

4934.1(Int):2008 Test methods - Energy performance


Specifies test methods for the energy performance of tungsten filament and tungsten halogen lamps used in general lighting
services.
Interim Standard - Expires 7 April 2010. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

4934.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements


Specifies the Minimum Energy Performance Standards (MEPS) requirements for General Lighting Service (GLS) lamps and certain
types of halogen lamps sold in Australia and New Zealand.
Interim Standard - Expires 7 April 2008. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems
Specifies the requirements and test methods for air admittance valves including those that are integral for a fixture trap. This
Standard does not cover air admittance valves for use where the air temperature is either below 0 degrees C or above 60 degrees C.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

BS 4940:1973 (Withdrawn)

AS/NZS 4944:2006 Gas meters - In-service compliance testing


Provides requirements for an in-service compliance testing regime for gas meters. It is intended for use by utilities or meter providers
responsible for maintaining metrological performance (in-service compliance) of meters.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

AS/NZS 4961:2003 Electric cables - Polymeric insulated - For distribution and service applications
Specifies the construction of a range of cables for distribution and service applications at working voltages up to and including
0.6/1(1.2) kV. This Standard will complement existing Standard AS/NZS 4026.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
AS/NZS 4965 Performance of close control airconditioners

AS/NZS 4965.1:2008 Testing for rating


Specifies the conditions on which the capacity and energy consumption of factory-made close control airconditioners are based and
the test methods to be applied to determine the capacity and efficiency ratings. This Standard covers equipment utilising a single or
multiple refrigerated direct expansion (DX) system designed to control and monitor temperature and humidity and may include
supplementary conditioning equipment.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 40 pages

AS/NZS 4965.2:2008 Minimum energy performance standard (MEPS) requirements


Specifies the minimum energy performance standard (MEPS) requirements for close control airconditioners that fall in the scope of
AS/NZS 4965.1. It does not specify electrical safety requirements but does specify values for cooling, as applicable: rated power
(input), rated capacity (output), energy efficiency ratio (EERS) for cooling, and minimum energy performance standard requirements.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 4966:2002 Ultrasonics - Pulsed Doppler diagnostic systems - Test procedures to determine
performance
Describes test methods for measuring the performance of pulsed Doppler ultrasound systems, and applies to tests made on overall
pulsed Doppler ultrasound system which is not disassembled or disconnected, and to tests made on pulsed Doppler ultrasound
systems whether they are stand-alone or as part of another ultrasound instrument. Electrical safety, acoustic output and
electromagnetic compatibility (EMC) are not covered in this technical specification. It is identical with and reproduced from IEC TS
61895:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

AS/NZS 4968:- Heavy-road vehicles - Mechanical coupling between articulated vehicle combinations

4968.1:2003 Design criteria and selection requirements for fifth wheel, kingpin and associated
equipment
Provides the attachment design forces for fifth wheel assembly and equations to determine the required D-value of components for
various combinations and applies to fifth wheel assemblies used with 50 mm, 75 mm and 90 mm kingpins and associated
equipment, used in heavy road vehicles, B-doubles and road trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 12 pages

4968.2:2003 Testing and installation of fifth wheel and associated equipment


Specifies performance requirements and recommendations for the installation of fifth wheel assemblies. Applies to fifth wheel
assemblies used with 50 mm, 75 mm and 90 mm kingpins for articulated vehicle combinations used in heavy road vehicles, B-
doubles and road trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 12 pages

4968.3:2003 Kingpins and associated equipment


Specifies requirements for 50 mm, 75mm and 90 mm kingpins for semi-trailers used in articulated vehicles, B-doubles and road
trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 21 pages

AS/NZS 4994:- Temporary roof edge protection for housing and residential buildings

4994.1(Int):2004 General requirements


Specifies requirements for the design, manufacture and testing of equipment that is intended to provide protection at the roof edge to
workers installing, altering, repairing or removing cladding on housing and residential buildings having roof slopes of not more than
35° to the horizontal.
Interim Standard - Expires 30 April 2008. Reprinted to incorporate Amendment 1:2007. An interim Standard is issued when a new
or revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 37 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

4994.2(Int):2004 Installation and dismantling


Sets out requirements and gives guidance for the selection, installation, use and dismantling of roof edge protection for housing and
residential buildings.
Interim Standard - Expires 30 April 2008. Reprinted to incorporate Amendment 1:2007. An interim Standard is issued when a new
or revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 29 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 4999:2006 PVC-U maintenance shafts


Specifies design and manufacture requirements for a PVC-U maintenance shaft (MS) comprising a fabricated or injection-moulded,
or both, chamber jointed to an extruded PVC riser.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 36 pages

BS 5000:- (Withdrawn)

AS/NZS 5000:- Electric cables - Polymeric insulated

5000.1:2005 For working voltages up to and including 0.6/1 (1.2) kV


Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials
intended for use at working voltages up to and including 0.6/1 (1.2) kV. It does not apply to polymeric insulated cables for special
installations and service conditions or for which there are separate Australian/New Zealand Standards.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

5000.2:2006 For working voltages up to and including 450/750 V


Provides construction, dimensions and tests for single-core and multicore polymeric insulated and oversheathed cables up to and
including 16mm2 conductor size intended for use in power and lighting circuits in installations at working voltages up to and including
450/750 V.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

5000.3:2003 Multicore control cables


Specifies the construction, dimensions and tests for screened and unscreened multicore control cables for voltages up to and
including 450/750 V intended for use in control, supervisory, protection and instrumentation circuits. It does not apply to cables used
solely for telecommunication purposes.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 6 pages

AS/NZS 5024(Int):2005 Potting mixes, composts and other matrices - Examination for legionellae
Sets out a qualitative test method for testing of potting mixes, composts and other solid matrices for Legionella species. It also
provides a quantitative test method which may be performed in addition to the qualitative test, if desired.
Interim standard - expires 11 April 2009. Reprinted to incorporate Amendment 1:2007. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS 5033:2005 Installation of photovoltaic (PV) arrays
Specifies electrical installation requirements for PV arrays with an open circuit voltage of up to 600 V d.c. or up to plus or minus 600
V with respect to earth.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 80 pages
Amendment 1, 2009 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 5044:1973 (Withdrawn)

NZS/BS 5045:- (Withdrawn)

NZS/BS 5053:1985 (Withdrawn)

NZS/BS 5062: (Withdrawn)

AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications,
above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow
and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages

BS 5070:- Engineering diagram drawing practice

Part 1:1988 Recommendations for general principles


Sets out drawing practice common to all fields of engineering diagrams. Covers layout, types of diagrams, drawing sheets, lines,
lettering and graphical symbols.
$242.42+GST (Members), $303.03+GST (Retail), 16 pages
Amendment 1, 1994 $29.95+GST (Members), $37.44+GST (Retail)

Part 3:1988 Recommendations for mechanical/fluid flow diagrams


Gives principles and presentation for mechanical, hydraulic, pneumatic, topographic diagrams: block, circuit, piping, interconnection
and supplementary.
$393.94+GST (Members), $492.43+GST (Retail), 4 pages

AS/NZS 5070 Siting and operation of radiocommunications facilities

5070.1:2008 General guidelines for fixed, mobile and broadcasting facilities including fixed location
satellite earth stations independent of the operating frequency
Recommends good practice for, and sets out desirable outcomes in, the planning, locating, constructing, commissioning, operating
and decommissioning of radiocommunications sites. It addresses particularly the sharing of radiocommunications sites and the
management of sites to achieve compliance with electromagnetic radiation human exposure limits set by other standards.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 60 pages

5070.2:2008 Guidelines for siting of radiocommunications facilities: VHF, UHF and SHF
Provides guidance for the siting, installation and operation of radiocommunications facilities for fixed, mobile and broadcasting
services operating at frequencies above 30 MHz, which are generically known as the VHF, UHF and SHF bands.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

NZS/BS 5073:1982 (Withdrawn)

AS/NZS 5078:2007 Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power
output and efficiency
Specifies a method for the determination of the average efficiency and average thermal power output from automatic feed, pellet
fuel-burning room heaters, that are intended to burn wood pellets or other suitable solid fuel.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 5101:1978 Specification for safety frames and safety cabs for attachment to agricultural wheeled
tractors
Establishes requirements for safety frames and safety cabs for wheeled tractors having a mass of 762 kg or more, when fitted with a
safety frame for use in agricultural operations.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

NZS 5102:1981 Specification for animal offal and meat treatment units for hydatids control
Establishes requirements for the design and manufacture of animal offal and meat treatment units for use in the control of hydatids. It
relates to units employing either heat or refrigeration methods of treatment of untreated meat and heat treatment of raw offal.
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

NZS 5103:1973 Code of practice for the design, installation and operation of sprinkler irrigation systems
Sets out rules for the design, installation and operation of sprinkler systems used for the irrigation of agricultural lands, orchards,
market gardens, lawns and landscaped areas.
$39.95+GST (Members), $49.94+GST (Retail), 31 pages

NZS 5104: (Superseded by NZS/ISO 3767)

NZS/BS 5118:1980 (Superseded by AS/NZS 1869:1996)

NZS/BS 5119:1980 (Withdrawn)

NZS/BS 5120:1987 (Withdrawn)

NZS 5121:1972 (Withdrawn)

NZS/BS 5121:1975 (Withdrawn)

NZS/BS 5122:1986 (Withdrawn)

AS/NZS ISO 5127:2004 Information and documentation - Vocabulary


Specifies international communication in the field of information and documentation. It presents terms and definitions of selected
concepts relevant to the field and identifies relations between the entries. Identical with, and has been reproduced from ISO
5127:2001.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 152 pages

NZS/BS 5150:1990 (Withdrawn)

NZS/BS 5151:1974 (Withdrawn)

NZS/BS 5152:1974 Specification for cast iron globe and globe stop and check valves for general purposes
Nominal diameter range DN 10 to 450 and nominal sizes one half to 6 for nominal pressure ratings PN 10, 16 and 25.
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 20 pages
Amendment 1, 1977 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1982 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1984 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 1989 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 5153:1974 (Withdrawn)

NZS/BS 5154:1991 (Withdrawn)

NZS/BS 5155:1984 (Withdrawn)

NZS/BS 5163:1986 Specification for predominantly key-operated cast iron gate valves for waterworks
purposes
Two types of valves in the range of sizes DN 50 to DN 600 for nominal pressures PN 10, PN 16 and PN 25. Type A valves are for T-
key operation only and type B valves, which are designed for heavier duty than type A valves, are usually for key/bar operation.
Adopted Standard
$345.45+GST (Members), $431.81+GST (Retail), 20 pages
Amendment 1, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1989 $29.95+GST (Members), $37.44+GST (Retail)

NZS/ISO 5166:1982 (Withdrawn)

NZS 5201:1973 Use of the Ringelmann and miniature smoke charts


Explains the purpose and method of use of these charts for the visual assessment of the darkness of smoke emitted from chimneys.
Identical to BS 2742:1969 with modifications for New Zealand.
Adopted Standard
$66.67+GST (Members), $83.34+GST (Retail), 8 pages
Amendment A, 1973 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5201C:1975 Ringelmann chart


Chart for use in visually assessing the darkness of smoke emitted from chimneys. Identical to BS 2742C:1957.
Adopted Standard
$66.67+GST (Members), $83.34+GST (Retail), 1 page

NZS 5201M:1975 British Standard miniature smoke chart


A chart, printed in shades of grey matt lacquer, which when held at about 5 ft from the observer gives readings of the density values
of smoke from chimneys. These are comparable with those obtained from the BS Ringelmann Chart. The method of use is explained
in NZS 5201. Identical to BS 2742M:1960.
Adopted Standard
$66.67+GST (Members), $83.34+GST (Retail), 1 page

NZS 5202:1979 (Withdrawn)

NZS 5203:1974 (Superseded by NZS/ISO 286:Part 1)

NZS 5204:1974 Machine tool tables. T-slots and corresponding bolts


Specifies the dimensions and the spacing of T-slots for machine tool tables. Also specifies the dimensions of bolts to be used in
these slots. Identical to ISO 299:1973 with modifications for New Zealand.
Adopted Standard
$77.19+GST (Members), $96.49+GST (Retail), 3 pages
Amendment A, 1974 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5206:1974 (Superseded by NZS/ISO 1005:Part 2)


NZS 5208:1974 (Superseded by NZS/ISO 1005:Part 4)

NZS 5212:1974 (Superseded by NZS/ISO 1180)

NZS 5214:1974 (Superseded by NZS/ISO 1180)

NZS 5215:1974 (Withdrawn)

NZS 5216:1974 (Withdrawn)

NZS/BS 5216:1991 (Withdrawn)

NZS 5217:1974 (Withdrawn)

NZS 5219:1974 (Withdrawn)

NZS 5220:1974 (Withdrawn)

NZS 5222:1976 (Superseded by NZS/BS 3492)

NZS 5223:- Code of practice for high pressure gas and petroleum liquids pipelines

Part 1:1985 High pressure gas pipelines


Minimum safety requirements and guidance as to good practice to be observed for the transmission of gas within pipelines and other
facilities. Covers design, installation, inspection, testing, safety aspects of operation and the maintenance of gas pipelines and
related facilities, where Maximum Working Pressure may exceed 2000 kPa. Also applies to Gathering Lines, regardless of pressure.
$149.95+GST (Members), $187.44+GST (Retail), 77 pages

Part 2:1987 Petroleum liquids transportation pipelines


Comprises an amendment to the American National Standard ANSI/ASME 31.4-1979 to ensure its suitability for New Zealand
conditions. To be read in conjunction with ANSI/ASME 31.4-1979.
Cited in Health and Safety in Employment (Pipelines) Regulations 2002 and Health and Safety in Employment (Pipelines)
Regulations 2003
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

NZS 5224.1:1980 (Withdrawn)

NZS 5224.2:1980 (Withdrawn)

NZS 5226:1987 The performance of manually operated wheelchairs


Provides a series of tests directly related to the impacts and loads encountered in everyday use. The ability of the wheelchair to
withstand these tests provides the buyer with the knowledge that the purchase will stand up to the rigors of service expected. The
wheelchair designer and manufacturer will use the tests as strength and stability standards to be met by the product. Wheelchair
importers or exporters are provided with a performance specification on which their purchasing contracts can be based.
$64.95+GST (Members), $81.19+GST (Retail), 84 pages

NZS 5227:1986 (Withdrawn)

NZS 5228:- Code of practice for the production and use of biogas, farm scale operation
Part 1:1987 Production of biogas
Provides information to enable planning, design and construction of a farm scale biogas plant and to assist in its safe and efficient
operation. Describes the process of biogas production.
Reconfirmed in 1993
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

Part 2:1987 Uses of biogas


Provides information on the utilization of the biogas produced by the plant.
Reconfirmed in 1993
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 5231:1980 (Superseded by NZS/BS 302)

NZS 5232:1993 Specification for ball-and-socket type trailer couplings


Establishes criteria for the design and testing of trailer couplings of the ball-and-socket type for use with a maximum towed mass
(combined trailer and load weight) up to and including 3500 kg.
Cited in Land Transport Rule 31002
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

NZS 5233:1986 (Superseded by AS/NZS 1892.1 & .3:1996)

NZS/BS 5233:1986 (Withdrawn)

NZS 5234:1990 (Withdrawn)

NZS 5235: (Superseded by AS/NZS 1677.1:1998 & AS/NZS 1677.2:1998)

NZS 5236:1990 (Superseded by AS/NZS 4474.1:1997)

NZS 5237:1986 Specification for ships` side scuttles


Requirements for design, construction, scantlings, glazing, testing and installation of light, medium and heavy series side scuttles
suitable for bolting or welding to the superstructure. The range of 200 mm to 400 mm covers opening and non-opening types fitted
with or without a dead light. Identical to BSMA 24:1974 with modifications for New Zealand.
Adopted Standard
$345.45+GST (Members), $431.81+GST (Retail), 40 pages
Amendment 1, 1986 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 1A, 1986 $29.95+GST (Members), $37.44+GST (Retail)
Amendment A, 1986 $29.95+GST (Members), $37.44+GST (Retail)

NZS/BS 5237:1985 (Withdrawn)

NZS 5238:1986 Specification for ships` windows


Specifies requirements for design, dimensions, construction scantling, glazing, testing and installation of non-opening and opening
windows for ships. Also specifies thickness of toughened safety glasses for use in respective tier positions in both passenger and
non-passenger ships. Identical to BSMA 25:1973 with modifications for New Zealand.
Reprinted incorporating Amendment 1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)
Amendment 1A, 1986 $29.95+GST (Members), $37.44+GST (Retail)
Amendment A, 1986 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5246: (Withdrawn)


NZS/BS 5252:1976 (Withdrawn)

NZS 5257:- Gas industry

5257.1:2004 Audit protocol


This Standard forms part of a Compliance Audit Protocol Framework designed to assist organisations in the Gas Industry involved in
transmission, distribution, retail, installation, and appliances, to access best-practice safety, measurement and quality procedures
and systems. The Framework comprises an audit protocol and associated workbooks that can be readily monitored by a company,
the industry and relevant regulatory agencies.
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

SNZ HB 5257:- Gas appliance safety

SNZ HB 5257.2:2004 Audit workbook


This audit workbook applies to all gas appliances and provides the means to evaluate the performance of appliances against the
requirements of NZS 5262 in accordance with NZS 5257.1. Criteria arising from NZS 5261 or the Gas Regulations are included
where appropriate.
$74.95+GST (Members), $93.69+GST (Retail), 24 pages

NZS 5258:2003 Gas distribution networks


This Standard has two key objectives. The first is to create performance-based requirements that could be made mandatory through
regulation, and a means of compliance in support of the mandatory requirements. The second objective is to take advantage of
existing New Zealand and Australian Standards to articulate minimum requirements for all aspects of distribution networks covered
by this Standard tailored for the New Zealand legislative and environment conditions. The Standard takes a risk assessment
approach requiring hazards to be identified and either eliminated or reduced to As Low As Reasonably Practicable (ALARP)
throughout the life cycle of the network system.
Reprinted to incorporate Amendment 1:2005
Cited in Gas Regulations 1993
$119.95+GST (Members), $149.94+GST (Retail), 120 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5259:2004 Gas measurement


Specifies acceptance tests for gas meters and correctors, gas meter selection and installation, and provides for conversion of
measured volume to energy.
$169.95+GST (Members), $212.44+GST (Retail), 80 pages

NZS 5261:2003 Gas installation


Legislative changes in 1992 removed the responsibility for inspection and certification of gas installations from the gas suppliers and
instituted a regime of gas certification by a person authorized under the Plumbers, Gasfitters and Drainlayers Act. This Standard in
Part 1 details the various aspects of a gas installation that contribute to its safety, stating performance criteria that shall be achieved
to ensure that the legislative requirements for safety of gas installations are met. Part 2 gives the gasfitter more detailed information
as a means of compliance with these performance criteria for small installations, and Part 3 gives references for use in the design
and specification of larger installations. The means of compliance in Parts 2 and 3 are not the only means of compliance with the
performance criteria in Part 1. Gas installations should be undertaken by persons authorized under the Plumber Gasfitters and
Drainlayers Act 1976.
A5 in size. Reprinted to incorporate Amendment 1:2005 and Amendment 2:2007, including Appendix O
Cited in Approved Code of Practice for the Design, Safe Operation, Maintenance and Servicing of Boilers, 2000 Edition Incorporating
Amendment 1:2004, BIA Approved Document C/AS1 and Gas Regulations 1993
$94.95+GST (Members), $118.69+GST (Retail), 172 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

Appendix O to NZS 5261:2003 Gas installation checklist (Appendix O)


Separate A4 sized version of the gas installation checklist (Appendix O). It is also included in the new Amendment 2 to NZS
5261:2003, but as A5 in size.
$29.95+GST (Members), $37.44+GST (Retail), 2 pages
NZS 5262:2003 Gas appliance safety
Sets out the essential safety requirements for all gas appliances intended for installation or use in New Zealand. It is not a design
code and therefore it does not address matters of performance, appearance or durability except where they are relevant to safety. It
covers all gas appliances and components supplied with them, that use, or are designed to use, gas, whether or not they also use, or
are designed to use, any other form of energy.
Reprinted to incorporate Amendment 1:2005
Cited in Gas Regulations 1993
$74.95+GST (Members), $93.69+GST (Retail), 28 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5263:2003 Gas detection and odorization


This standard ensures that persons are warned of the presence of escaping gas well before gas concentrations in the atmosphere
reach levels capable of causing a hazard. It identifies when and where odorization is required as the means of detection and where
other means of detection can be used. In addition, the Standard specifies minimum odorant concentrations in gas, which include an
allowance for wide variation in human olfactory responses and makes requirements for olfactory tests. This Standard incorporates
and replaces the requirements of the New Zealand Gas Code of Practice for Odorisation of Gas (NG GCP 3:1993).
$94.95+GST (Members), $118.69+GST (Retail), 45 pages

NZS 5270:2005 Cable cars for private residences - Design, construction, installation and maintenance
Sets out the requirements for power-operated inclined cable cars installed on private property or extending onto road service.
$89.95+GST (Members), $112.44+GST (Retail), 36 pages

NZS 5301:1977 (Withdrawn)

NZS/BS 5315:1991 (Withdrawn)

NZS/BS 5323:1980 (Withdrawn)

NZS/ISO 5343:1983 (Withdrawn)

NZS 5351:1972 (Withdrawn)

NZS/BS 5351:1986 (Withdrawn)

NZS/BS 5352:1981 (Withdrawn)

NZS 5401:1982 Specification for seat belt assemblies for motor vehicles
Applies to seat belts and harnesses for use as individual equipment by occupants of motor vehicles. It does not apply to child-
restraining devices. Design, construction and test requirements are specified for both the individual components of an assembly and
for the complete assembly.
Reprinted to append Amendment 1:1991
Cited in Land Transport Rule 32011
$59.95+GST (Members), $74.94+GST (Retail), 34 pages
Amendment 1, 1991 $29.95+GST (Members), $37.44+GST (Retail)

NZS/ISO 5406:1980 (Withdrawn)

NZS 5411:1991 (Superseded by AS/NZS 1754:1995)

NZS 5412:1982 Specification for loading door aperture dimensions of road vehicles used for the bulk
transportation of meat
Specifies the minimum dimensions of the clear aperture required for the loading door in the body of trucks and trailers used for the
bulk transportation of meat.
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

NZS 5413:1993 Code of practice for the manufacture and use of stock crates on heavy vehicles
Applies to stockcrates fitted to vehicles with a GVM of 6000 kgs or greater, used for the cartage of livestock, and specifies the
minimum requirements for the design, performance and construction of stockcrates and effluent containment devices.
Reprinted to append Amendment 1:2000
Cited in Land Transport Rule 31002
$49.95+GST (Members), $62.44+GST (Retail), 24 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5414:1977 Specification for the construction of traffic signs


Relates to plain and reflectorized signs of all types (not internally-illuminated) which are used in connection with the movement of
traffic, and establishes criteria for long-term visual performance and structural integrity. Requirements are given for durability,
including weather resistance, and recommended methods of construction to achieve the necessary performance.
Reconfirmed in 1984
$39.95+GST (Members), $49.94+GST (Retail), 24 pages

NZS 5415:1988 Traffic hazard warning lamps


Applies to warning lamps designed to call attention to or delineate the location of temporary hazards to vehicular traffic. Includes
requirements for the photometric performance of various types of lamp, to ensure that they will provide an effective warning signal,
and covers the specific requirements for design and construction of battery-operated lamps. It also requires the provision of facilities
which will enable the lamps to be effectively used and readily maintained. Identical to AS 1165:1982 with modifications for New
Zealand.
Adopted Standard
$62.50+GST (Members), $78.13+GST (Retail), 22 pages
Amendment A, $29.95+GST (Members), $37.44+GST (Retail)

NZS 5417:1986 (Superseded by NZS 5433:1999)

NZS 5418:- Transportation containers for hazardous substances

Part 1:1983 Specification for tanks for the multi-modal transportation of hazardous liquids
Requirements for design, construction, testing, and use of rigid portable metal tanks of greater than 450 L capacity for the carriage of
hazardous liquids within New Zealand by any combination of road, rail and sea, but not air. Requirements are specifically for Type 1
tanks and the lower pressure-rated Type 2 tanks are included by inference. Not intended to cover tanks for use in one transport
mode only.
Reprinted to append Corrigendum 1:1984
$64.95+GST (Members), $81.19+GST (Retail), 79 pages
Corrigendum: 1 1984

Part 2:1983 Specification for small packages for transportation by land, sea and air
Applies to packages that, in general, have a maximum net weight of 400 kg or a maximum capacity of 250 L. May be extended to
cover containers over 450 L constructed as specified.
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

NZS 5419:1991 Motor vehicles - Light alloy road wheels


AS 1638-1991
Sets out minimum requirements for type approval based on performance testing of light aluminium alloy and magnesium alloy road
wheels for vehicles with a gross mass not exceeding 3.5t. Wheels may be cast, wrought or of composite construction. Applies to
wheels which are designed for normal driving conditions, and does not purport to apply to wheels which will not fracture or fail under
conditions such as may be experienced in an accident. It should be noted that wheels conforming to this Standard may fracture
under conditions similar to those which produce severe buckling or failure in steel wheels.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

NZS 5420:1980 (Withdrawn)


NZS 5421:1981 (Withdrawn)

NZS 5422:- Code of practice for the use of LPG and CNG fuels in internal combustion engines

Part 1:1987 LPG fuel


Applies to the design, construction, installation, operation, maintenance and fuelling of liquefied petroleum gas (LPG) systems where
LPG is used either wholly or in part as a fuel for internal combustion engines. Covers the special requirements of industrial trucks
and forklifts.
Superseded in part by AS/NZS 1425:1999 but Section 10 remains current. Reprinted incorporating Amendment 1
Cited in Marine Rules: Part 80 - Marine Craft Used for Adventure Tourism - Code of Practice for the Safety of Jet Boats Operating
on Rivers
$64.95+GST (Members), $81.19+GST (Retail), 36 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)

Part 2:1987 CNG fuel


Applies to the design, construction, installation, operation, maintenance and fuelling of compressed natural gas (CNG) systems
where CNG is used either wholly or in part as a fuel for internal combustion engines. In general it is directed towards vehicle
installations. Covers special requirements of industrial and forklift trucks.
Superseded in part by AS/NZS 2739:1999 but Section 10 remains current. Reprinted incorporating Amendment 1
$59.95+GST (Members), $74.94+GST (Retail), 32 pages
Amendment 1, $29.95+GST (Members), $37.44+GST (Retail)

Part 3:1991 (Superseded by AS/NZS 1425:1999 and AS/NZS 2739:19999)

NZS/BS 5422:1990 Method for specifying thermal insulating materials on pipes, ductwork and equipment (in
the temperature range -40 degrees C to +700 degrees C)
Insulation of surfaces of process plant, vessels, tanks, ducts, pipelines, boilers and ancillary plant. Domestic, commercial and
industrial applications for heating fluids and raising steam for ventilation and for refrigeration and air conditioning.
Adopted Standard
$454.55+GST (Members), $568.19+GST (Retail), 64 pages

NZS 5423:1996 Specification for repairing and retreading car, truck and bus tyres
Specifies the minimum requirements for the repairing and retreading of car, truck and bus pneumatic tyres used in highway service.
It specifies certain constructional features such as the examination, limits of damage, preparations and permissible repairs of the tyre
carcass before processing, and the marking and inspection of the tyre after curing. Minimum performance levels are also given.
Except where otherwise stated, the requirements apply to both tubed and tubeless tyres.
Reprinted to append Amendment 1:1998
Cited in Import Control (Tyres) Conditional Prohibition Order 1996
$59.95+GST (Members), $74.94+GST (Retail), 19 pages
Amendment 1, 1998 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5424:1980 (Withdrawn)

NZS 5425:- Code of practice for CNG compressor and refuelling stations

Part 1:1994 On site storage and location of equipment


Provides planning formation, procedures, standards and guidance in the procuring of equipment for the establishment of a CNG
compressor and refuelling station.
Approved electrical safety Standard; Reprinted to append Amendment 1:1995
Cited in Gas Regulations 1993
$84.95+GST (Members), $106.19+GST (Retail), 43 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

Part 2:1996 Compressor equipment


Specifies requirements that apply to natural gas compressors designed as suitable for continuous full load duty, mechanically,
electrically or hydraulically powered and intended for cylinder refilling applications, together with their control systems and essential
safety equipment. Such compressors are usually, but not necessarily, multistage reciprocating compressors with cooled lubricated
cylinders of either trunk type or crosshead design.
Cited in Gas Regulations 1993
$49.95+GST (Members), $62.44+GST (Retail), 18 pages

Part 3:- Metering devices

Part 3, Division 1P:1985 Division 3.1P Metering method using tables and calculator programme
Sets out a method for metering CNG by measuring the residual pressure of gas in the vehicle cylinder, the ambient air temperature
adjacent to the gas storage supply, the final fill pressure of the vehicle cylinder and by noting the capacity of the vehicle cylinder.
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

Part 3, Division 2:1984 Division 3.2 Installation and operation of on-line metering devices
Deals with on-line metering devices fitted to the fill line and measuring the quantity of CNG which has passed through the refuelling
line during a specific filling operation. Covers requirements for the installation and the operation of these instruments in relation to the
operating principle. Apart from the quantity, the pressure at the end of filling has to be measured and displayed.
Reprinted to append Amendment 1:1996
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 1996 $29.95+GST (Members), $37.44+GST (Retail)

Part 3, Division 3:1984 Division 3.3 Requirements for type approval of on-line metering devices
Relates to measuring systems for CNG, incorporating on-line CNG flow meters.
Reprinted to append Amendment 1:1993
Cited in Gas Regulations 1993
$44.95+GST (Members), $56.19+GST (Retail), 22 pages
Amendment 1, 1993 $29.95+GST (Members), $37.44+GST (Retail)

Part 4:1994 CNG trickle fill stations on commercial and industrial premises
The object of this Standard is to provide planning information, procedures, standards and guidance for the establishment of a CNG
compressor station utilizing a trickle fill refuelling system.
Reprinted to append Amendment 1:1995
Cited in Gas Regulations 1993
$64.95+GST (Members), $81.19+GST (Retail), 31 pages
Amendment 1, 1995 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5426, Part 1:1980 (Superseded by NZS/ASME/ANSI B56.1)

NZS 5426, Part 2:1980 (Superseded by NZS/ANSI/NFPA 505)

NZS 5426, Part 3:1980 (Superseded by NZS/ANSI/UL 583)

NZS 5426, Part 4:1980 (Superseded by NZS/ANSI/UL 558)

NZS 5426, Part 5:1980 (Superseded by NZS/ASME/ANSI B56.5)

NZS 5426, Part 6:1980 (Superseded by NZS/ASME/ANSI B56.6)

NZS 5428:2006 LPG installations for non-propulsive purposes in caravans and boats
Applies to the installation in caravans and in boats of LPG systems for domestic and commercial appliances using gas cylinders and
operating at a nominal pressure of 2.8 kPa. Requirements for piping, ventilation and flueing are included, as are emergency
procedures and safety requirements. Excludes matters related to the use of LPG for propulsion.
$84.95+GST (Members), $106.19+GST (Retail), 41 pages

NZS 5429:1982 (Withdrawn)


NZS 5430:1992 Protective helmets for vehicle users
Specifies minimum performance criteria and the test requirements for protective headgear for vehicle users, designed to mitigate the
adverse effects of a blow on the head. It refers particularly to helmets for motor cyclists, but is equally applicable to all vehicle users,
including racing car drivers and racing motor cyclists. Tests for impact attenuation, penetration resistance, strength of the retention
system and its attachments, and peripheral vision are prescribed. Specific marking requirements are detailed. Identical to AS 1698-
1988 with modifications for New Zealand.
Adopted Standard
$25.00+GST (Members), $31.25+GST (Retail), 4 pages
Amendment A, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5431:1973 Specification for traffic signals


Ensures the consistent application of the warrants necessary to assess the need for traffic signals throughout the country. Indicates
a means of compliance in terms of layout, equipment, operation and maintenance of such systems. Installations covered are those
used for: (a) the control of intersections and pedestrian crossing places; (b) the control of one lane sections of roadway; (c) the
control of lane usage; and (d) the compulsory interruption of the traffic stream at places other than intersections.
Reconfirmed in 1980; Reprinted to append Amendment 1:1975
$39.95+GST (Members), $49.94+GST (Retail), 43 pages
Amendment 1, 1975 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5432:1990 Webbing for restraining devices for occupants of motor vehicles
AS 1753-1990
Specifies requirements for the manufacturing, performance, marking, and packaging of webbing for restraining devices for occupants
of motor vehicles.
Reprinted to append Amendment 1:1992
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 16 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5433 Part 1:2007 CD-ROM Transport of dangerous goods on land - Part 1 - Technical information - CD-ROM version
Part 1 is the main body of the Standard detailing technical requirements, including classification criteria and packaging performance
standards. It provides regulatory requirements governing the safe transport of dangerous goods. This Standard has been updated
to reflect the revised Land Transport Rule, UNRTDG latest update (14th edition), reviewed and amended in line with latest practices
and technologies and the Classification section has been revised.
CD-Rom version
$179.95+GST (Members), $224.94+GST (Retail), 189 pages

NZS 5433 Part 1:2007 Transport of dangerous goods on land - Part 1 - Technical information
Part 1 is the main body of the Standard detailing technical requirements, including classification criteria and packaging performance
standards. It provides regulatory requirements governing the safe transport of dangerous goods. This Standard has been updated
to reflect the revised Land Transport Rule, UNRTDG latest update (14th edition), reviewed and amended in line with latest practices
and technologies and the Classification section has been revised.
$179.95+GST (Members), $224.94+GST (Retail), 189 pages

NZS 5433.1&2:2007 CD-ROM Transport of dangerous goods on land - Parts 1 & 2 - CD-ROM version
Provides regulatory requirements governing the safe transport of dangerous goods. The transport industry has a particular
responsibility to ensure that potentially hazardous operations do not threaten the safety and well-being of the community and our
environment. This Standard has been updated to reflect the revised Land Transport Rule, UNRTDG latest update (14th edition),
reviewed and amended in line with latest practices and technologies and the Classification section has been revised.
Does not include a Segregation Wheel
$259.95+GST (Members), $324.94+GST (Retail), 624 pages

NZS 5433.1&2:2007 Transport of dangerous goods on land - Parts 1 & 2 - Hardcopy version
Provides regulatory requirements governing the safe transport of dangerous goods. The transport industry has a particular
responsibility to ensure that potentially hazardous operations do not threaten the safety and well-being of the community and our
environment. This Standard has been updated to reflect the revised Land Transport Rule, UNRTDG latest update (14th edition),
reviewed and amended in line with latest practices and technologies and the Classification section has been revised.
Includes the Segregation Wheel
$259.95+GST (Members), $324.94+GST (Retail), 624 pages

NZS 5433 Part 2:2007 Transport of dangerous goods on land - Part 2 - List of dangerous goods
Part 2 contains information such as the UN list of dangerous goods and special provisions. It provides regulatory requirements
governing the safe transport of dangerous goods. This Standard has been updated to reflect the revised Land Transport Rule,
UNRTDG latest update (14th edition), reviewed and amended in line with latest practices and technologies and the Classification
section has been revised.
$119.95+GST (Members), $149.94+GST (Retail), 355 pages

NZS 5433 Part 2:2007 CD-ROM Transport of dangerous goods on land - Part 2 - List of dangerous goods - CD-ROM
version
Part 2 contains information such as the UN list of dangerous goods and special provisions. It provides regulatory requirements
governing the safe transport of dangerous goods. This Standard has been updated to reflect the revised Land Transport Rule,
UNRTDG latest update (14th edition), reviewed and amended in line with latest practices and technologies and the Classification
section has been revised.
$119.95+GST (Members), $149.94+GST (Retail), 355 pages

NZS 5433B:2007 Transport of dangerous goods on land - A4-sized colour chart


Pack of 10 A4 laminated colour charts to NZS 5433:2007 shows the segregation of packages for each class of dangerous goods.
$34.95+GST (Members), $43.69+GST (Retail)

NZS 5433D:2007 Transport of dangerous goods on land - Colour poster


Laminated large wall chart shows segregation of packages for each class of dangerous goods. from NZS 5433:2007.
$39.95+GST (Members), $49.94+GST (Retail), 1 page

NZS 5433F:2007 Transport of dangerous goods on land - Dangerous goods declaration and packaging
declaration forms
Dangerous goods declaration forms from NZS 5433:2007. Comprises a pack of 5 pads of 50 forms each.
$34.95+GST (Members), $43.69+GST (Retail)

NZS 5433H.1:2001 (Withdrawn)

NZS 5433H.2:2001 (Withdrawn)

NZS 5433T:1999 (Withdrawn)

NZS 5433W:1999 Segregation wheel for the transport of dangerous goods on land
Segregation wheel to NZS 5433:1999. Shows segregation of packages for each class of dangerous goods.
$24.95+GST (Members), $31.19+GST (Retail)

NZS 5433W:1999 Pack of 5 Segregation wheel for the transport of dangerous goods on land
A pack of 5 Segregation Wheels. Shows segregation of packages for each class of dangerous goods.
$79.95+GST (Members), $99.94+GST (Retail)

NZS 5434:1986 (Superseded by AS/NZS 1596:1997)

NZS 5435:1996 Specification for liquefied petroleum gas (LPG)


Sets out composition and other requirements for commercial propane, commercial butane, general product and special product.
Reprinted to incorporate Amendment 1:2008
Cited in Gas Regulations 1993
$49.95+GST (Members), $62.44+GST (Retail), 13 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5436:1982 (Withdrawn)

NZS 5439:1986 (Superseded by AS/NZS 2063:1996)


NZS 5441:- Lighting and retroreflectors for pedal cycles

Part 1:1987 Specification for lamp units and retroreflectors suitable for fitting to pedal cycles
Covers the photometric and physical requirements for lamp units and retroreflectors for use on pedal cycles.
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

Part 2:1987 Code of practice for the fitting of lamp units and retroreflectors to pedal cycles
Contains details for the fitting of lamp units and retroreflectors to pedal cycles to provide adequate conspicuity for the pedal cycle to
be used on the road by day and night.
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

NZS 5442:2008 Specification for reticulated natural gas


Defines the requirements for providing a gas suitable for transportation and for end use by most consumers for gas burning
appliances or vehicle fuel. Provides an indication of reasonable regularity for testing gases entering the transmission systems and
guidelines relating to the management of situations when the specification is in danger of being breeched. In this edition the
requirements to demonstrate compliance have been further clarified and the test methods have been reviewed and updated.
$89.95+GST (Members), $112.44+GST (Retail), 24 pages

NZS 5443:1987 (Superseded by AS/NZS 2080:1995)

NZS 5444:2005 Load anchorage points for vehicles


Published as one document comprising two parts. Part 1 (Securing points on vehicles operated on roads) specifies the performance
requirements, and gives some examples that meet the performance requirements, for load anchorage securing points and their
connection to the body structure and/or chassis of road vehicles. Part 2 (Securing points on vehicles carried on 'ro-ro' ships)
specifies the minimum requirements for securing points on load carrying road vehicles for securing the vehicle on board 'ro-ro' ships.
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

NZS 5445:1986 (Superseded by AS/NZS 4380:1996)

NZS 5446:2007 Heavy vehicle towing connections - Drawbeams and drawbars


Establishes design, manufacture, installation, testing, maintenance, repair, and certification criteria necessary to ensure that a
secure connection can be maintained between towing vehicles and drawbar trailers. Although primarily covering applications
incorporating pin or hook type couplings, this Standard also applies to other types of couplings covering both rigid and hinged
drawbars.
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

NZS 5450:1989 Coupling devices for articulated vehicles - Fifth wheel assemblies
Sets out recommendations for the selection, installation and maintenance of fifth wheel assemblies mounted on heavy motor
vehicles used on and off the highways. Rigid fifth wheel assemblies and convertor dollies are not covered by this Standard.
Cited in Heavy Motor Vehicle Regulations 1974; Land Transport Rule 31002
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

NZS 5451:1989 Coupling devices for articulated vehicles - Fifth wheel kingpins
Sets out recommendations for the selection, installation and maintenance of 50 mm fifth wheel kingpins on semi-trailers used on and
off the highways. Semi-trailers with kingpins mounted in conformance with this Standard will be interchangeable with tractor units
with fifth wheel assemblies mounted in accordance with NZS 5450.
Cited in Heavy Motor Vehicle Regulations 1974; Land Transport Rule 31002
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 5453:1989 New tyres for passenger vehicles


Specifies requirements of strength, construction and standard pressure/load relationships for new pneumatic tyres for passenger
cars and prescribes tests required for their acceptance.
Cited in Import Control (Tyres) Conditional Prohibition Order 1996; Land Transport Rule 32013
$49.95+GST (Members), $62.44+GST (Retail), 18 pages
NZS 5454:1989 Standard requirements for lightweight steel automotive compressed natural gas cylinders
for use in New Zealand
Applies to those cylinders with a normal maximum operating pressure of 20 MPa specifically designed for use in motor vehicles.
Certain requirements for materials specifications, materials mechanical testing, cylinder manufacturing methods and Quality
Assurance are addressed. A number of pressure tests are specified which cylinders must satisfactorily comply with to obtain the
required approval. Requirements for design submission to NZ Statutory Authorities are specified.
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 5455:1989 (Withdrawn)

NZS 5461:1989 High level stop light


Specifies design parameters and performance requirements for a single centrally mounted high level stop light for fitment to motor
vehicles.
Cited in Transport (Vehicle Standards) Regulations 1990
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 5462:1988 (Superseded by AS/NZS 1418.9:1996)

NZS 5463:1989 (Superseded by AS/NZS 2430.3.2:2004)

NZS 5464:1990 (Superseded by AS/NZS 2230:1999)

NZS 5465:2001 Self containment for motor caravans and caravans


This Standard specifies the requirements for water supply, sanitary plumbing and drainage installation and solid waste containment
in motor caravans and caravans for the purpose of obtaining a self containment certificate.
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

NZS 5466: (Superseded by AS/NZS 3629, Parts 1, 3 & 4:1997)

NZS 5467:1993 Code of practice for light trailers


Aims to provide the minimum requirements for the design, manufacture and safe operation of light trailers, that is, up to 3500 kg
maximum towed mass. Design emphasis is on fatigue criteria. The code also provides stability criteria for trailers of greater mass
than the towing vehicle to prevent snaking.
Reprinted to append Amendment 1:2001 and Corrigendum 1:1993
Cited in Land Transport Rule 31001; Land Transport Rule 31002; Traffic Regulations 1976
$64.95+GST (Members), $81.19+GST (Retail), 48 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)
Corrigendum: 1 1993

NZS 5470:1993 (Superseded by AS/NZS 2366, Parts 1 & 2:1999)

NZS/BS PD5500:2003 Specification for unfired fusion welded pressure vessels


Specifies requirements for the design, construction, inspection, testing and verification of compliance of unfired fusion welded
pressure vessels.
Adopted Standard
$2,592.00+GST (Members), $3,240.00+GST (Retail), 858 pages

NZS/BS 5539:1978 (Withdrawn)

BS 5556:1978 (Withdrawn)

NZS/BS 5590:1978 (Withdrawn)


NZS 5600: (This series has been renumbered and reissued as Joint Standards. See NZS 9000 series.)

AS/NZS 5603:2009 Stand-alone inverters – Performance requirements


Provides manufacturers, test laboratories and users of inverters with a set of parameters and tests for assessing the performance of
a stand-alone inverter.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

NZS 5604:1987 (Superseded by AS/NZS ISO 8402:1994)

AS/NZS 5667:- Water quality - Sampling

5667.1:1998 Guidance on the design of sampling programs, sampling techniques and the preservation
and handling of samples
Provides general principles to be applied in the design of sampling programs, general guidance on sampling techniques and
guidance on the procedures to be taken to preserve and transport samples for the physical, chemical and radiological analysis of
waters and wastewaters, including bottom sediment and sludges, for the purposes of process control, quality characterization,
identification of sources of pollution, compliance with water quality guidelines or standards, and other specific reasons.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 51 pages

5667.4:1998 Guidance on sampling from lakes, natural and man-made


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of water from natural and man-made lakes. It is technically equivalent to and has been reproduced from ISO 5667-4:1987.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages

5667.5:1998 Guidance on sampling of drinking water and water used for food and beverage processing
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of drinking water and water used for food and beverage processing. It is identical with and has been reproduced from ISO 5667-
5:1991.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

5667.6:1998 Guidance on sampling of rivers and streams


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
from rivers and streams. It is identical with and has been reproduced from ISO 5667-6:1990.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

5667.7:1998 Guidance on sampling of water and steam in boiler plants


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of water
samples and steam in boiler plants. It is identical with and has been reproduced from ISO 5667-7:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

5667.8:1998 Guidance on the sampling of wet deposition


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of wet deposition. It is identical with and has been reproduced from ISO 5667-8:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

5667.9:1998 Guidance on sampling from marine waters


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
from marine waters. It is technically equivalent to and has been reproduced from ISO 5667-9:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 9 pages

5667.10:1998 Guidance on sampling of waste waters


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of waste water. It is identical with and has been reproduced from ISO 5667-10:1992.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

5667.11:1998 Guidance on sampling of groundwaters


Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of groundwater. It is technically equivalent to and has been reproduced from ISO 5667-11:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 11 pages

5667.12:1999 Guidance on sampling of bottom sediments


Provides guidance on the sampling of sedimentary materials from inland rivers and streams; lakes and similar standing bodies of
water; and estuarine and harbour areas. Open ocean sediments and sludges from industrial and sewage works are specifically
excluded. This Standard is identical with and has been reproduced from ISO 5667-12:1995.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

BS 5669.4:1989 (Withdrawn)

BS 5685.1-1979 (Withdrawn)

NZS 5701:1991 (Withdrawn)

NZS 5702:1991 (Withdrawn)

AS/NZS 5761:2005 In-service safety inspection and testing - Second-hand electrical equipment prior to sale
Covers the inspection and testing process to be followed prior to sale of a second-hand electrical appliance so that when the
appliance re-enters service, protection against hazards to the user, such as electrical shock, mechanical injury, or electrical fire is
ensured as far as practicable.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 11 pages

AS/NZS 5762:2005 In-service safety inspection and testing - Repaired electrical equipment
Covers the testing and inspection process following the repair of electrical appliances so that when the appliance re-enters service,
protection against hazards such as electrical shock, mechanical injury, or thermal fire is ensured as far as possible.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

NZS/ISO 5764:1987 Milk. Determination of freezing point. Thermistor cryoscope method


Specifies a method for the determination of the freezing point of raw, pasteurized, UHT-treated or sterilized whole milk, partially
skimmed milk and skimmed milk.
Adopted Standard
$87.72+GST (Members), $109.65+GST (Retail), 6 pages

NZS/BS 5799:1986 Specification for safety requirements for children`s high chairs and multi-purpose high
chairs for domestic use
Safety requirements and methods of test for high chairs and multi-purpose chairs which may be convertible to low chairs, low chairs
with tables, baby walking frames, pushchairs, swings, car chairs or reclining low chairs. Covers materials, construction, performance,
marking and instructions.
Reprinted to incorporate Amendment 1:1991
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 20 pages
Amendment 1, 1991 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5801:1974 Specification for the construction and fitting of machinery guards
Establishes requirements in relation to the construction and fitting of guards to the dangerous parts of machinery.
Reconfirmed in 1983; Reprinted to append Amendment 1:1977
$34.95+GST (Members), $43.69+GST (Retail), 11 pages
Amendment 1, 1977 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5802:1978 (Withdrawn)

NZS 5803:1977 (Superseded by ISO 2631:Parts 1-3)

NZS 5804:1986 (Superseded by AS/NZS 2088)

NZS 5806:1980 (Superseded by AS/NZS 1801:1997 from 5 September 1998)

NZS 5807:1980 Code of practice for industrial identification by colour, wording or other coding
Defines safety colours, safety signs and other warning indications which will aid in prevention of accidents, indication of health
hazards, and location and identification of first aid and fire-fighting equipment. Defines meaning and application of colours and other
indications which are recommended for identification of pipes conveying fluids in liquid or gaseous conditions; and identification of
conduit and ducting enclosing electric services. Makes provision for identification of contents of industrial gas cylinders. Approved
electrical safety Standard.
Reprinted to append Amendments 1 & 2
Cited in BIA Approved Documents G10/AS1 and G12; Marine Rules: Part 40A - Design, Construction and Equipment - Passenger
Ships which are not Solas Ships; Marine Rules: Part 40C - Design, Construction and Equipment - Non-Passenger Ships that are not
Solas Ships Consultation Details; Marine Rules: Part 40D - Design, Construction And Equipment - Fishing Ships
$94.95+GST (Members), $118.69+GST (Retail), 20 pages
Amendment 1, 1983 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1988 $29.95+GST (Members), $37.44+GST (Retail)

NZS 5807C:1980 Code of practice for industrial identification by colour, wording or other coding
Poster shows colours, wording and coding for industrial identification. Coloured poster included free with all Parts of NZS 5807.
$74.95+GST (Members), $93.69+GST (Retail), 1 page

NZS 5808:1980 (Withdrawn)

NZS 5809:1980 (Superseded by NZS 5845)

NZS 5810:1992 (Superseded by AS/NZS 2172)

NZS 5811.1:1981 (Superseded by AS/NZS 1891.1:1995)

NZS 5811.2:1981 (Superseded by AS/NZS 1891.4:2000)

NZS 5812:1982 (Superseded by AS/NZS 2161.2:1998, AS/NZS 2161.3:1998 and AS/NZS 2161.4:1999)

NZS 5813:1982 (Withdrawn)

NZS 5815:1985 (Withdrawn)

NZS 5816:1986 (Superseded by AS/NZS 1337)


NZS 5817:1983 (Superseded by AS/NZS 1338)

NZS 5818:1982 (Withdrawn)

NZS 5819:1982 Chain saw safety


Sets out safety recommendations pertaining to the correct design and operation of chain saws. Intended for manufacturers, owners,
employers and operators.
Reconfirmed in 1989
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

NZS 5820:1982 Specification for the safety of toys


Sets out general safety requirements, constructional requirements, toxicological requirements, flammability requirements and test
methods for the safety of toys for children aged up to 14 years.
Approved electrical safety Standard; Reprinted to append Amendment 1:1990 and Corrigendum 1:1985.
$39.95+GST (Members), $49.94+GST (Retail), 95 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)
Corrigendum: 1 1985

NZS 5821:- Laser safety

Part 1:1981 (Superseded by NZS/AS 2211)

Part 2:1981 Plain language code of practice for the safe use of lasers in surveying, levelling and
alignment
Outlines precautions for using visible light lasers for surveying, levelling and alignment purposes.
Reconfirmed in 1990
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

Part 3:1981 Plain language code of practice for the safe use of lasers in teaching
Explains the hazards and outlines precautions in the use of visible light lasers employed for demonstration and practical instruction
purposes in secondary schools and universities.
Reconfirmed in 1990
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

NZS 5822:1992 Prevention of ingestion and inhalation hazards in toys intended for use by children under
three years of age
Sets out safety requirements and test methods for the prevention of ingestion and inhalation hazards in toys intended for use by
children under three years of age. These are extracts from NZS 5820:1982 which meet the requirements of the Product Safety
Standards (Children`s Toys) Regulations 1992.
Cited in Product Safety Standards (Children`s Toys) Regulations 1992; Product Safety Standards (Baby Walkers) Regulations 2001
$64.95+GST (Members), $81.19+GST (Retail), 48 pages

NZS 5823:2005 Specification for buoyancy aids and marine safety harnesses and lines
Sets out general and specific requirements for the following types of buoyancy aids for surface water use such as boating and water
skiing: coastal lifejackets for use in coastal waters; lifejackets for use in sheltered waters; buoyancy vests; buoyancy aid wet suits;
buoyancy garments; rescue buoys; float-off buoyancy aids and specialist lifejackets. Also covers selection of the various buoyancy
aids and their care. Sets out requirements for safety harnesses and lines for use by yachtsmen and other boat users. Specifies
general design requirements, constructional requirements, test methods and requirements for individual components, together with a
performance test and labeling requirements for the finished article.
$94.95+GST (Members), $118.69+GST (Retail), 90 pages

NZS 5825:1991 Child-resistant packages


Specifies requirements for packages designated as resistant to opening by children under 5 years of age. For medicinal products
both reclosable and non-reclosable packages are covered but for other products reclosable types of package only are specified.
$59.95+GST (Members), $74.94+GST (Retail), 18 pages
NZS 5826:2000 Pool water quality
This covers the essential aspects of the operation and maintenance of pools in regard to pool water quality criteria including
reference to methods of water treatment. It does not cover maintenance of heating equipment or of mechanical and electrical
equipment. It covers all fresh water and sea water swimming pools and spa pools and geothermal pools during use. Safe handling of
swimming pool chemicals is also covered.
$59.95+GST (Members), $74.94+GST (Retail), 64 pages

NZS 5827:1988 (Withdrawn)

NZS 5828:2004 Playground equipment and surfacing


Specifies general requirements for playground equipment and surfacing, with the adoption of BS EN 1176 Parts 1-7:1998, BS EN
1177:1998 and BS 7188:1998, with addendums for playgrounds and playground equipment to meet the needs that are specific to the
New Zealand environment.
$179.95+GST (Members), $224.94+GST (Retail), 176 pages

SNZ HB 5828.1:2006 General Playground Equipment and Surfacing Handbook


Intended for owners and operators of playground facilities as a guide for achieving compliance with the Standard. It does not replace
the Standard nor does it add any content to the Standard, but aims to present key safety information in everyday terms. It presents
examples, recommendations and commentaries that provide guidance and includes checklists for different applications based on a
risk management framework that will assist in reaching compliance with the Standard.
$59.95+GST (Members), $74.94+GST (Retail), 72 pages

SNZ HB 5828.2:2006 Supervised Early Childhood Facilities - Playground Equipment and Surfacing Handbook
Intended for use in conjunction with the Standard and does not replace it or add new material to that covered within the Standard.
The aim is rather to present the key safety information in everyday terms. The Handbook gives examples, recommendations and
commentaries as guidance and includes inspection checklists based on a risk management framework to assist in establishing
inspection, and maintenance processes to identify and address playground risk.
$59.95+GST (Members), $74.94+GST (Retail), 76 pages

NZS 5829: (Withdrawn)

NZS 5831:- Walking aids for the disabled

Part 1:1989 Specification for walking sticks


Considers from a performance aspect the suitability of each component of the walking stick and the complete assembly. In this
respect it considers both objective and subjective criteria by means of a variety of tests.
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

Part 2:1989 Specification for elbow crutches


Considers from a performance aspect the suitability of each component of the elbow crutches and the complete assembly. In this
respect it considers both objective and subjective criteria by means of a variety of tests.
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

Part 3:1989 Specification for axilla crutches


Considers from a performance aspect the suitability of each component of the axilla crutches and the complete assembly. In this
respect it considers both objective and subjective criteria by means of a variety of tests.
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 5832:- Driving controls for people with disabilities

Part 1:1988 Hand controls


Applies to mechanical type manually operated driving control systems (other than those provided by the vehicle manufacturer) for
use by drivers who are physically disabled to enable them to operate passenger vehicles. Specifically excludes electromechanical
type controls and controls that do not permit the conventional use of the standard automotive controls by drivers who are not
disabled.
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

NZS 5835:1984 (Withdrawn)


NZS 5836:1985 (Withdrawn)

NZS 5838:1986 (Withdrawn)

NZS 5839:1986 Specification for high visibility garments and accessories for road users
Specifies required performance criteria for retroreflective and high visibility fabrics and garments worn by road users, particularly
pedestrians, children, joggers, cyclists and roadworkers. Materials are graded into 3 classes according to photometric performance:
(1) high performance on occupational garments or visibility accessories which are worn regularly at night-time; (2) intermediate
performance for recreational garments or accessories or where occasional night-time use is anticipated; and (3) material with other
required properties in addition to night-time visibility, such as day-time visibility.
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

NZS 5840:1988 Specification for protective legwear for chain saw users
Specifies requirements for protective legwear designed to prevent or minimize injuries to the legs caused by a chain saw. The cut
resistance of the material of the protective legwear to the chain saw and the dimensions of the protective legwear are specified.
Reprinted to append Amendment 1:1993 and Corrigendum 1:1989
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Amendment 1, 1993 $29.95+GST (Members), $37.44+GST (Retail)
Corrigendum: 1 1989

NZS 5841, Part 1:1988 (Superseded by AS/NZS 3661.2)

NZS 5842:1989 (Withdrawn)

NZS 5843:1988 (Withdrawn)

NZS 5844:1989 (Withdrawn)

NZS 5845:1989 (Superseded by AS/NZS 2210.1 & AS/NZS 2210.2)

NZS 5846:1988 (Withdrawn)

NZS 5847 Part 1:1988 (Withdrawn)

AS/NZS 5848:2000 Code of practice for bungy jumping


This Standard specifies and gives guidance on the site and site approval, the design, testing and approval of equipment, the
management of the operation, the operating procedures, the emergency provisions and procedures and registration of operating
staff of a bungy jumping operation.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 56 pages

NZS 5852:1991 (Withdrawn)

NZS 5855:1997 Consumer safety specification for components, assembly, and use of a trampoline
Covers the components, assembly, siting and use of trampolines exceeding 14,800 cm2 bed area designed for continuous vertical
jumping activities and is intended to reduce the hazards associated with the use of such equipment. Identical to ASTM F381-95 with
modifications for New Zealand.
Adopted Standard
$64.95+GST (Members), $81.19+GST (Retail), 5 pages
Amendment A, 1997 $29.95+GST (Members), $37.44+GST (Retail)
NZS 5856:1993 (Withdrawn)

NZS 5857:1993 (Withdrawn)

NZS/BS 5872:1980 Specification for locks and latches for doors in buildings
Tests for performance levels for locks and latches for doors used in buildings and for use in housing. Also specifies dimensions.
Does not include locks and latches for fire doors.
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 24 pages

NZS/BS 5884:1987 (Withdrawn)

NZS 5901:- (Superseded by NZS/AS 1100)

AS/NZS ISO 5901:2004 Information and documentation - International standard recording code
Defines and promotes the use of a standard code for the unique identification of recording. Identical with, and has been reproduced
from ISO 3901:2001.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

NZS 5902:- Building and civil engineering drawing practice

Part 0:1986 (Superseded by NZS/AS 1100.101:1992)

Part 1:1986 (Superseded by NZS/AS 1100.301)

Part 2:1976 (Superseded by NZS/AS 1100.501:1985)

Part 3:1976 (Superseded by NZS/AS 1100.401)

Part 4:1976 (Withdrawn)

Part 5:1981 Recommendations for drawings associated with engineering services operating manuals
and maintenance manuals
Establishes general guidelines for the production of maintenance drawings for the range of engineering services installations in
buildings covered by Parts 1 to 4 of NZS 5902. Specifically intended to provide information on the location, the function and the
operation aspects of items of services installations subject to maintenance.
Reprinted to append Amendment 1:1985
$39.95+GST (Members), $49.94+GST (Retail), 24 pages
Amendment 1, 1985 $29.95+GST (Members), $37.44+GST (Retail)

NZMP 5905:1981 (Withdrawn, see SAA/SNZ HB 1)

NZMP 5906:1984 (Withdrawn, see SAA/SNZ HB 1)

AS/NZS 5911(Int):2005 General guidelines on the verification, validation and assurance of environmental and
sustainability reports
Provides guidelines for the conduct and declaration of verification, validation and assurance of an organization's environmental and
related performance.
Interim Standard - Expires 17 March 2009. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and re-
issued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 24 pages

NZS 5931:1972 (Superseded by BS 1347)

NZMP 6001:1985 New Zealand`s role in the International Electrotechnical Commission


Gives general information on the IEC and describes the part New Zealand plays in it. Is intended primarily to be a handbook for
Chairpersons of New Zealand counterpart committees and by others who review IEC documents.
$34.95+GST (Members), $43.69+GST (Retail), 20 pages

NZMP 6002:1987 (Withdrawn)

NZMP 6003:1999 (Withdrawn)

NZMP 6004:1999 Safer electrical installations in homes for children, the elderly and people with disabilities
This Handbook is intended as a guide to the electrical services that can be usefully installed in homes used by children, the elderly,
and those with disabilities. While the Handbook is specifically concerned with domestic installations, the information included will also
benefit commercial homes, day-care centres and hospitals.
$39.95+GST (Members), $49.94+GST (Retail), 28 pages

BS 6007:1983 (Withdrawn)

NZS 6101:- Classification of hazardous areas

Part 1:1988 (Superseded by AS/NZS 60079.10:2004)

Part 2:1990 (Superseded by AS/NZS 61241.3:1999)

Part 3:1991 (Superseded by AS/NZS 2430.3, Sections 1 to 9:1997)

NZS 6102:1976 Code of practice for the storage, handling and maintenance of automotive lead-acid starter
batteries
Covers procedures for the distribution and warehousing of new batteries up to the time of sale to the end user. Relates to lead-acid
batteries which are stored in ambient temperatures between 0 degrees C and 32 degrees C, and intended for use in motor vehicles,
motor boats, tractors, or any other industrial application where regulated charging systems are fitted.
Reconfirmed in 1991
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

NZS 6103:1979 (Withdrawn)

NZS/ISO 6103:1986 (Withdrawn)

NZS 6104:1981 Specification for emergency electricity supply in buildings


Specifies a means of providing an emergency electricity supply in a building served by conventional 230/400 V single-phase/three-
phase reticulation. Applies to services where a short break can be readily tolerated. The electricity source specified is a generator
driven by a diesel engine or a gas turbine. Sets out requirements for this generating plant and its accommodation: specifies the
emergency loads to be supplied, and the wiring distribution within the building; and describes the actions necessary to commission
and maintain the installation.
Reconfirmed in 1991; Approved electrical safety Standard
Cited in BIA Approved Document C/AS1 & F6/AS1
$49.95+GST (Members), $62.44+GST (Retail), 27 pages

NZMP 6105:1976 (Withdrawn)

NZS 6106:1980 Specification for capacitors for connection to power-frequency systems


Classification by temperature categories, safety requirements, tests for capacitors for power factor correction on low, medium or high
voltages and frequencies up to 100 Hz. Motor starting capacitors excluded. Identical to BS 1650:1971 with modifications for New
Zealand.
Reconfirmed (re-validated for use in NZ) in 1991
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 32 pages
Amendment A, 1980 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6107, Part 1:1983 (Withdrawn)

NZS 6108:1984 Specification for accommodation for electricity supply substations in consumers buildings
Specifies the accommodation requirements for an electrical substation incorporated in a building in order to supply the electric power
requirements of that building, and possibly of one or more adjacent buildings, when required by the local Electrical Supply Authority.
The Standard provides a basis for agreement between parties concerned with electricity supply and with buildings design.
Reconfirmed in 1991; Approved electrical safety Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

NZS 6109.1:1988 (Superseded by AS/NZS 2229:2004)

NZS 6109.2:1988 (Superseded by AS/NZS 2229:2004)

NZS 6110:2007 Electrical installations - Floor and ceiling heating systems


Provides guidance on the installation of floor and ceiling heating systems. It specifies how floor and ceiling heating systems can be
installed when they are either a heating unit, heating cable, or flexible sheet heating element, the installation of which is not
prescribed electrical work as defined in the Electricity Regulations. This Standard is intended to be used in conjunction with AS/NZS
3000 or AS/NZS 3018, and is intended to be used as a means of compliance with the relevant requirements of the New Zealand
Electricity Regulations.
$39.95+GST (Members), $49.94+GST (Retail), 17 pages

NZS 6112:1989 (Superseded by AS/NZS 3800:1997)

NZS 6114:2006 Electrical installations - Requirements for the safe supply of electricity to installations and
equipment operating at non-standard voltages and frequencies
Covers installations and equipment sourced from outside New Zealand, and which operate at voltages and/or frequencies other than
those used in New Zealand, ensuring they can be safely supplied from the New Zealand electricity supply. Supply of electricity to
aircraft is outside the scope of this Standard, nor is it intended to cover hazardous area, electromedical or ELV installations or
equipment. Note: Amendment 1 was published on 26 January 2007 to withdraw Section 6 and Appendix B of the Standard pending
further assessment. The remainder of NZS 6114:2006 remains in place as a New Zealand Standard.
Reprinted to incorporate Amendment 1:2007
$59.95+GST (Members), $74.94+GST (Retail), 24 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6115:2006 Electrical Installations - Mobile Electro-medical Connectable Installations


Provides guidance for the construction, checking and testing of electrical installations in mobile medical facilities. It supplements or
modifies the requirements for electrical installations contained in AS/NZS 3000, AS/NZS 3001, AS/NZS 3003, NZS 3003.1 and NZS
3019. It is intended to cover installations in caravans, motor homes, trailers and similar vehicles which have been purpose built or
converted to provide medical services outside of fixed medical facilities. Only medical services requiring body protected areas are
covered.
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

NZS 6116:2006 Safe application of electricity in the meat processing industry


Covers electrically powered meat processing installations/appliances including animal stunners (hand held, semi-automatic and
automated), immobilisers, accelerated conditioning systems and spinal discharge units. These installations/appliances are used in
the meat processing industry for humane and safety reasons as well as to cover special requirements of New Zealand's overseas
customers for meat products.
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

NZS 6150:1990 (Superseded by AS/NZS 3200.1.0:1998)

BS 6179:1982 (Endorsement cancelled)

NZS 6200:1988 (Superseded by NZS/AS 3100)

NZS 6203.1:1987 (Withdrawn)

NZS 6205:- (Superseded by AS/NZS 4474 Parts 1 & 2:1997)

NZS 6206:1980 Specification for domestic electric meter boxes


Specifies materials, construction, dimensions, etc. of enclosures suitable for use at domestic premises as part of the electric wiring
installation, to accommodate the electrical supply authority`s tariff meters and any associated apparatus.
Approved electrical safety Standard; Reprinted to append Amendments 1 & 2
$39.95+GST (Members), $49.94+GST (Retail), 7 pages
Amendment 1, 1988 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6207:1982 (Superseded by AS/NZS 2053.1)

NZS 6208:- (Withdrawn)

NZS 6210:1984 (Withdrawn)

NZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters
(alternating current only)
Covers consumer adjustable thermostats (immersion and contact types) and non-self-resettable thermal cutouts either as separate
or combined units. Specifies design and construction, dimensions, temperature settings, operational requirements, marking and
performance, and testing.
Approved electrical safety Standard
Cited in BIA Approved Document G12/AS1
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

NZS 6216:1989 (Superseded by AS/NZS 3112)

NZS 6217:1989 (Superseded by AS/NZS 3120)

NZS 6218:1989 (Superseded by AS/NZS 3122)


NZS 6219:1989 (Superseded by AS/NZS 3105)

NZS 6221.1-1972 (Superseded by AS/NZS 2053.1, AS/NZS 2053.7 and AS/NZS 2053.8)

NZS 6221.2-1972 (Superseded by AS/NZS 2053.1, AS/NZS 2053.7 and AS/NZS 2053.8)

NZS 6232:1996 (Superseded by AS/NZS 3350.2.60:2000 and AS/NZS 3136:2001)

NZS 6300:1996 (Withdrawn)

NZS 6301:1973 (Superseded by AS/NZS 3152)

NZS 6302:1992 (Superseded by AS/NZS 3350.2.2:1995)

NZS 6303:1992 (Superseded by AS/NZS 3350.2.3:1995)

NZS 6306.2:1992 (Superseded by AS/NZS 3350.2.31:1997)

NZS 6307:1991 (Superseded by AS/NZS 3350.2.7:1995)

ISO 6308:1980 (Superseded by AS/NZS 2589.1:1996)

NZS 6311:1993 (Superseded by AS/NZS 3350.2.11:1995)

NZS 6315:1998 (Superseded by AS/NZS 3350.2.15:1997)

NZS 6317:1988 (Superseded by AS/NZS 3164:1994)

NZS/ISO 6318:1985 (Withdrawn)

NZS 6323:1995 (Superseded by AS/NZS 3350.2.23:1997)

NZS 6324:1995 (Superseded by AS/NZS 3350.2.24:1998)

NZS 6325:1992 (Superseded by AS/NZS 3350.2.25:1997)

NZS 6327:1992 (Superseded by AS/NZS 3350.2.27:1996)

NZS 6328:1992 (Superseded by AS/NZS 3350.2.28:1996)

NZS 6329:1990 (Superseded by AS/NZS 3350.2.29:1996)

NZS 6331:1972 (Superseded by AS/NZS 3103)


NZS 6332:1992 (Superseded by AS/NZS 3350.2.32:1996)

NZS 6335:1990 (Superseded by AS/NZS 3350.2.21:1999 and AS/NZS 3350.2.35:1999)

NZS 6343:1994 (Superseded by AS/NZS 3350.2.43:1996)

BS 6346:1987 (Withdrawn)

NZS/ISO 6346:1984 (Withdrawn)

NZS 6353:1992 (Superseded by AS/NZS 3350.2.53:1998)

NZS 6361:1972 (Superseded by AS/NZS 3114)

AS/NZS 6400:2005 Water efficient products - Rating and labelling


Enables consumers to clearly identify and purchase water efficient products with the full confidence that the performance of these
products has not been compromised due to their reduced water usage. It is also intended to encourage manufacturers to develop
and market products that are more water efficient.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 64 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6401:2003 (Superseded by AS/NZS 5000.2:2006)

NZS 6402:1973 (Withdrawn)

NZS 6403:1980 (Withdrawn)

ISO 6474:1981 (Withdrawn)

BS 6480:1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of
rated voltages up to and including 33 000 V
Specifies construction, dimensions and test requirements for mass-impregnated non-draining paper insulated cables with lead or
lead alloy sheaths for operation up to and including 33 000 V between phases. Provision is made for armour and protective clothing.
$393.94+GST (Members), $492.43+GST (Retail), 52 pages

NZS 6501:1982 Units of measurement


Provides lists of the agreed international symbols and names for the coherent units of the International System of Units known as SI.
The tables in the various sections show the one and only SI unit for each of about 500 physical quantities. Physical quantities are
defined or identified with varying degrees of completeness. Symbols are recommended for each physical quantity with suggested
alternatives in many cases. Recommendations are given for the printing of letters and numbers and of symbols for mathematical
operations. A guide is given for the use of the terms coefficient, factor, parameter, number, ratio and constant. Identical to ISO
Standards Handbook 2:1982.
Cited in National Standards Regulations 1976
Adopted Standard
$64.95+GST (Members), $81.19+GST (Retail), 258 pages
Corrigendum: 1 1983
NZS 6502:1972 (Withdrawn)

NZS 6504:- Specification for measuring instruments for constructional works

Part 1:1975 Metric graduation and figuring of instruments for linear measurement
Form of graduation and figuring, in metric units, of rules, lathes, squares, etc., and of steel pocket rules, tapes and bands, tapes in
synthetic material, and land chains and levelling staffs. Some instruments are illustrated. Identical to BS 4484:Part 1:1969 with
modifications for New Zealand.
Adopted Standard
$193.94+GST (Members), $242.43+GST (Retail), 12 pages
Amendment A, 1975 $29.95+GST (Members), $37.44+GST (Retail)
Amendment B, 1979 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6505:1976 (Superseded by NZS/AS 2536)

NZS 6506:1982 (Superseded by NZS/BS 5884)

NZS 6507: (Withdrawn)

AS/NZS ISO 6529:2006 Protective clothing - Protection against Chemicals - Determination of resistance of
protective clothing materials to permeation by liquids and gases
Describes laboratory test methods that enable a determination of the resistance of materials used in protective clothing to
permeation by liquid or gaseous chemicals under the conditions of either continuous or intermittent contact. Identical to and
reproduced from ISO 6529:2001.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

AS/NZS ISO 6530:2006 Protective clothing - Protection against liquid chemicals - Test method for resistance of
materials to penetration by liquids
Describes a laboratory test method for the measurement of penetration resistance of protective clothing materials from the impact
and runoff of liquids. Identical to and reproduced from ISO 6530:2005.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

NZS/BS 6539:1984 (Withdrawn)

NZS/ISO 6551:1982 Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled
transmission of electric and/or electronic pulsed data
Establishes guidelines for ensuring the fidelity and security of pulsed data cabled transmission systems utilized for the metering of
fluids, ensuring the integrity of the primary indication. Criteria and recommendations for design, installation, use and maintenance of
the relevant equipment. Regulatory requirements, including those for safety, are not specifically covered in detail but notes on safety
are included for guidance.
Adopted Standard
$129.82+GST (Members), $162.28+GST (Retail), 12 pages

NZS/ISO 6592:1985 (Withdrawn)

NZMP 6600:1991 (Withdrawn)

NZS 6601:1980 (Superseded by NZS/AS 3250)

NZS 6602:1983 Compatibility of VHF-FM sound broadcast receivers with broadcast signals
Describes the technical characteristics of the VHF-FM signals broadcast in New Zealand, the carrier frequencies allocated to this
service, and other parameters relating to the performance of receivers and receiving antennae. Specifies certain design
characteristics of receivers and receiving antennae that are necessary or desirable for satisfactory reception in the presence of the
levels of interference considered likely to occur in New Zealand.
Reprinted to append Erratum 1
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Erratum: 1 1983

NZS 6603:1984 Guide for the design and installation of multiple outlet distribution systems for sound and
television signals
Sets out recommendations for good reception and reticulation of sound and television signals in buildings on a single site. Intended
for the guidance of architects, contractors and building owners who are involved with the planning, installation and maintenance of
MATV systems. Does not provide the detailed information required by the systems engineer to design a complete system, as such
information is available in handbooks published by manufacturers. Includes recommendations regarding the provision of antenna
systems and coaxial cable distribution systems, the necessary structural accommodation for equipment and wiring, and protective
measures against danger from electric shock, fire and other hazards.
$44.95+GST (Members), $56.19+GST (Retail), 19 pages

NZS 6605:1988 Compatibility of television broadcast receivers with broadcast signals


Describes the technical characteristics of the television signals broadcast in New Zealand, the carrier frequencies allocated to this
service, and other parameters relating to the performance of receivers and receiving antennae. Specifies certain design
characteristics of receivers and receiving antennae that are necessary or desirable for satisfactory reception in the presence levels of
interference considered likely to occur in New Zealand.
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 6606:1988 Broadcast teletext


Defines the teletext broadcasting system used in New Zealand. Describes: (a) the formation of binary code groups into data-lines for
inclusion in the television field-blanking interval; (b) how the control and address information carried on each data-line, together with
the special page-header data-lines and the sequence of transmission of the data-lines, allows the data-lines corresponding to the
rows of a selected page to be identified; and (c) the method by which the character codes received on the data-lines corresponding
to the rows of the selected page are interpreted to give the page display. Additional requirements are given for the transmission of
closed caption data by teletext, and an appendix gives details of an enhanced teletext system which may eventually be introduced in
New Zealand.
$59.95+GST (Members), $74.94+GST (Retail), 32 pages

NZS 6608:1990 (Withdrawn)

NZS 6609:- Radiofrequency radiation

Part 1:1990 (Superseded by AS/NZS 2772.1(Int):1998)

Part 2:1990 Principles and methods of measurement - 300 kHz to 100 GHz
Specifies techniques and instrumentation for the measurement of potentially hazardous electromagnetic fields in both the near field
and far field of electromagnetic sources, in the frequency range 300 kHz to 100 GHz. To ensure accuracy of measurement,
techniques have been included to estimate or avoid multipath interference, caused by scattering or reflection of energy from other
objects or surfaces. Also discussed are the spurious effects experienced with instrumentation for measurement. Identical to AS
2772, Part 2:1988 with modifications for New Zealand.
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 36 pages
Amendment A, 1990 $29.95+GST (Members), $37.44+GST (Retail)

NZS 6610:2001 Digital Television Transmission (Satellite, Cable and Terrestrial Broadcasting)
This New Zealand standard adopts ETR 154 (Implementation guidelines for the use of MPEG-2 systems, Video and Audio in
satellite, cable and terrestrial broadcasting applications) and modifies it for New Zealand specific characteristics.
$94.95+GST (Members), $118.69+GST (Retail), 18 pages

NZS 6621:1972 (Superseded by AS/NZS 2557)


NZS 6623: (Withdrawn - see SAA/SNZ HB55)

NZS 6651:1973 (Superseded by NZS 6605)

NZMP 6652:1978 (Withdrawn)

NZMP 6653:2000 Information Systems Security Standards Handbook


A source book to provide information technology and information security professionals with a reference to a wide range standards
from the major IT Security Standards arena. Cross references are also provided.
$84.95+GST (Members), $106.19+GST (Retail), 82 pages

NZS 6656:1995 Code of practice for the implementation and operation of a trustworthy computer system
This Standard specifies security requirements for use where a contract between two parties requires the demonstration of a
supplier`s capability to implement and/or operate a computer system, such as in an outsourcing arrangement, which enforces
information confidentiality, integrity, and availability. It applies equally to system acquisition, where the two parties are the system
purchaser and the supplier; to facilities management, where the two parties are the system owner (purchaser) and the facilities
management provider (supplier); or internal provision of systems and services, where the two parties are the organization`s business
units (purchasers) and the organization`s data processing unit (supplier).
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 6660:1987 (Superseded by NZS 6661)

NZS 6661:1989 (Superseded by AS/NZS 3260)

NZS 6701:1983 Code of practice for road lighting


Specifies the performance to be achieved wherever lighting is provided on public thoroughfares used by vehicular traffic, classified
as major roads, intermediate roads and minor roads. Pedestrian crossing lighting is included. Provides a prescriptive design method
for straightforward installations using manufacturers` performance tables, as well as the theory of the luminance approach and the
steps necessary to design for more complex situations. Design parameters include luminance, uniformity and glare; and guidance is
also given on the making of cost comparisons, including energy use. This code does not deal with the special requirements of bridge
or tunnel lighting.
Reprinted to append Erratum 1:1985
$64.95+GST (Members), $81.19+GST (Retail), 44 pages
Erratum: 1 1985

NZS 6703:1984 Code of practice for interior lighting design


Deals with the design of interior lighting, primarily in workplaces, taking into account both natural and artificial lighting, and relates the
lighting to energy use. The code also covers the maintenance of lighting systems and their measurement. The code is concerned
primarily with workplaces, but can have application to many recreational and circulation spaces (but not where special effects are to
be designed). Extensive tables for lighting level and glare index are included, along with detached calculation charts and procedures.
Superseded in part by AS/NZS 1680.1:2006, AS/NZS 1680.2.4:1997 and AS/NZS 1680.2.5:1997, but remains current
Cited in BIA Approved Documents F6/VM1, G7/AS1/VM1 and G8/VM1
$94.95+GST (Members), $118.69+GST (Retail), 82 pages
Corrigendum: 1 1985

NZS 6704:1980 (Superseded by IEC 60155)

NZS 6705:- Luminaires

Part 1:1986 (Superseded by AS/NZS 60598.1:1998)

Part 2, Section 3:1986 (Superseded by AS/NZS 1158.6:2004)


NZS 6708:- (Withdrawn)

AS/NZS ISO 6709:2008 Standard representation of latitude, longitude and altitude for geographic point locations
Describes a variable-length format for the representation of latitude, longitude and altitude for use in data interchange. Allows the
use of normal sexagesimal notations involving degrees, minutes and seconds as well as various combinations of sexagesimal and
decimal notations. Uses numeric characters 0 to 9, graphic characters plus (+), minus (-), full stop (.) and comma (,). Identical to ISO
6709:1983.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

NZS 6741:1979 (Superseded in part by NZS/AS 3137)

NZS 6742:1971 (Superseded by AS/NZS 2293 Parts 1, 2 & 3:1995)

NZS 6801:2008 Acoustics - Measurement of environmental sound


Defines basic quantities to be used for the description of sound in community environments and describes procedures for the
measurement of these quantities. The procedures described are intended to enable consistent measurement of environmental
sound for all conditions within the scope of the Standard. These procedures are referenced by other Standards in the Acoustics
series. Users of this Standard are assumed to have a basic understanding of the science of acoustics and experience in sound
measurement. The Standard may be cited in local authority rules, plans, and consent conditions or in National Environmental
Standards to avoid the need for inclusion of technical information while ensuring national consistency in sound measurement
methods.
$99.95+GST (Members), $124.94+GST (Retail), 39 pages

NZS 6802:2008 Acoustics - Environmental noise


Sets out procedures for the assessment of noise for compliance with noise limits, and provides guidance for the setting of noise
limits for consent conditions, rules or national environmental standards. Assessment is based on a rating level which can be derived
from simple and detailed assessment methods. These expand the methods used in the 1999 edition. Guidelines for setting noise
limits and writing consent conditions have been revised, and guidelines for protection of health and amenity expanded to address
common planning issues.
$99.95+GST (Members), $124.94+GST (Retail), 53 pages

NZS 6803:1999 Acoustics - Construction noise


Covers the measurement and prediction of noise from construction, maintenance and demolition work, and the assessment of such
noise to determine whether action is required to control it. Intended to assist local authorities, developers, architects, engineers,
planners, designers, and contractors to control noise on and from construction, maintenance and demolition sites. Includes detailed
methodology for predicting noise from construction activities, and sound level data tables for a wide range of construction equipment.
$94.95+GST (Members), $118.69+GST (Retail), 68 pages

NZS 6805:1992 Airport noise management and land use planning


For use by territorial or regional government to control airport noise. Establishes maximum acceptable levels on noise for the
protection of community health.
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

NZS 6807:1994 Noise management and land use planning for helicopter landing areas
Details procedures for the measurement and assessment of noise from helicopter landing areas and recommends land use planning
measures where necessary to mitigate the adverse effects of noise on land uses surrounding the helicopter landing area.
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS 6808:1998 Acoustics - The assessment and measurement of sound from wind turbine generators
Provides a suitable method for the measurement and assessment of sound from wind turbine generators. Also provides guidance
on the limits of acceptability for sound received at residential and other noise sensitive locations. The standards may be applied
during the wind turbine generator or windfarm development planning process, to confirm compliance with resource consent
conditions covering sound levels, and for the investigation and assessment of noise complaints arising from wind turbine generators.
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

NZS 6809:1999 Acoustics - Port noise: Management and land use planning
For use by territorial or regional government to control port noise. Establishes maximum acceptable levels on noise for the protection
of community health.
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

NZS 6869:2004 Limits and measurement methods of electromagnetic noise from high voltage a.c. power
systems, 0.15 - 1000 MHz
Establishes limits for electromagnetic interference (radio disturbance) from alternating current (a.c.) overhead power lines and high
voltage equipment installations in the frequency range 0.15 to 1000 MHz. These limits are specified for the protection of broadcast
radio reception and other radio communication services, including navigation and safety-of-life services.
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

NZS 6906:2007 Electronic fee transaction using dedicated short-range communication (DSRC)
Provides the standard framework for interoperable communications between vehicles and the roadside for Multi Lane Free Flow
(MLFF) Electronic Fee Collection (EFC) systems in New Zealand, based on Dedicated Short-Range Communication (DSRC). The
structure of interoperability is applicable to toll operators, EFC system integrators and equipment suppliers.
$119.95+GST (Members), $149.94+GST (Retail), 62 pages

NZS/BS 6920: (Withdrawn)

NZS/BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)
Specifies requirements for roofing, tanking and flooring grades of mastic asphalt for building and civil engineering purposes,
composed of ground limestone, coarse aggregate and pigment if required, incorporated with asphaltic cements.
Adopted Standard
$121.21+GST (Members), $151.51+GST (Retail), 12 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 7101:1981 (Withdrawn)

NZS 7102:1980 Specification for intra-uterine contraceptive devices


Prescribes the physical properties of intra-uterine contraceptive devices, any tails or threads and associated insertion instruments,
and conditions pertaining to the sterilizing, packaging, labelling and storage of such devices.
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

NZS 7104:1993 Rubber condoms


Specifies requirements for condoms, made from compounded natural rubber latex, supplied in consumer packages, designed to be
worn over the erect penis during sexual intercourse to prevent semen from entering the vagina and to assist in the prevention of
sexually transmitted diseases.
$49.95+GST (Members), $62.44+GST (Retail), 26 pages

NZS 7106:1998 Polyurethane condoms


Specifies requirements for condoms, made from polyurethane, supplied in consumer packages, designed to be used during sexual
intercourse for contraception and to assist in the prevention of sexually transmissible infections.
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

NZS 7121:1979 Specification for hospital beds


Sets out the principal dimensions and constructional requirements for fixed height and variable height beds for use in hospitals and
other medical institutions and specifies the minimum test requirements for such beds.
$39.95+GST (Members), $49.94+GST (Retail), 20 pages

NZS 7122:1980 Specification for accessories for use with hospital beds
Covers the general design requirements of accessories for use with hospital beds manufactured in compliance with NZS 7121:1979,
and specifies minimum test requirements where appropriate.
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

NZS 7201:1986 (Withdrawn)

NZS 7202.1:1986 (Withdrawn)

NZS 7202.2:1986 (Withdrawn)

NZS 7203:1992 (Superseded by AS/NZS 2243.8:2001)

NZS 7204:1990 (Withdrawn)

NZS/ISO 7243:1989 (Withdrawn)

NZS 7401:1985 (Superseded by AS/NZS 3869:1999)

NZS 7402:1992 (Superseded by AS/NZS 4012:1999)

NZS 7403:1992 (Superseded by AS/NZS 4013:1999)

NZS 7404.1:1992 (Superseded by AS/NZS 4014.1:1999)

NZS 7404.2:1992 (Superseded by AS/NZS 4014.2:1999)

NZS 7404.3:1992 (Superseded by AS/NZS 4014.3:1999)

NZS 7404.4:1992 (Superseded by AS/NZS 4014.4:1999)

NZS 7421:1990 (Superseded by AS/NZS 2918:2001)

NZS/ISO 7434:1983 (Withdrawn)

NZS/ISO 7435:1983 (Withdrawn)

NZS/ISO 7436:1983 (Withdrawn)

AS/NZS 7450.1:1999 (Superseded by AS/NZS 60745.1:2003)

NZS/ISO TR7477:1985 Data communication - Arrangements for DTE to DTE physical connection V.24 and X.24
interchange circuits
Describes various arrangements for the interconnection of Data Terminal Equipment (DTE) without intermediate Data Circuit-
terminating Equipment (DCE), in terms of electrical, mechanical and functional characteristics. Applies to DTEs with interface circuits
standardized in CCITT Recommendation V.24 for data transmission over telephone networks or with interface circuits standardized
in CCITT Recommendation X.24 for transmission over public data networks. Identical to AS 3510-1987 and ISO TR7477:1985.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 8 pages

NZS/ISO 7478:1987 Information processing systems - Data communication - Multilink procedures


Specifies multilink procedures where a multiplicity of parallel data links at the data link layer are used to provide a variable bandwidth
data link between network layer entities. The multilink procedures (MLP) exist as a new upper sublayer of the data link layer,
operating between the network layer and a multiplicity of single data link protocol functions (SLPs) in the data link layer. This
Standard does not specify the way in which the SLPs indicate to the MLP that the transmission of a multilink frame has successfully
been completed. Identical to AS 3511-1987 and ISO 7478:1987.
Adopted Standard
$129.82+GST (Members), $162.28+GST (Retail), 11 pages

NZS/ISO 7498:- Information processing systems - Open Systems Interconnection - Basic reference model

7498.2-1988 (Withdrawn)

7498.3-1988 Naming and addressing


Defines general mechanisms for the use of names and addresses to identify and locate objects in the OSI environment and defines
the use of these mechanisms within the layered structure of the Basic Reference Model. Identical to AS 2777.3-1990 and ISO
7498:1988.
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 21 pages

7498.4-1988 (Withdrawn)

NZS 7500:2005 Automotive biodiesel - Specification for manufacture and blending


Specifies requirements and test methods for biodiesel to be used either as automotive fuel for diesel engines at 100% concentration,
or as a blend component for automotive fuel for compression ignition engines.
$109.95+GST (Members), $137.44+GST (Retail), 36 pages

NZS 7521:1971 (Withdrawn)

NZS/ISO 7531:1987 (Withdrawn)

NZS 7601:1978 Specification for polyethylene pipe (Type 3) for cold water services
Sets out the material, dimensions, properties, tests and marking requirements for black polyethylene pipe of Type 3 for use in cold
water services, and in flush, overflow, warning and waste-pipe applications. The type designation refers to the maximum working
stress of the material at 20 degrees C, in megapascals, when in pipe form.
Cited in BIA Approved Documents G12/AS1 and G14/VM1
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

NZS 7602:1977 Specification for polyethylene pipe (Type 5) for cold water services
Sets out the material, dimensions, properties, tests and marking requirements for black polyethylene pipe of Type 5 for use in cold
water services, and in flush, overflow, warning and waste-pipe applications. The type designation refers to the maximum working
stress of the material at 20oC, in megapascals, when in pipe form.
Reprinted to append Amendment 1:1978
Cited in BIA Approved Documents G12/AS1 and G14/VM1
$49.95+GST (Members), $62.44+GST (Retail), 16 pages
Amendment 1, 1978 $29.95+GST (Members), $37.44+GST (Retail)

NZS 7603:1979 Specification for refuse bags for local authority collection (low density polyethylene)
Covers the material, dimensions, properties, tests and marking requirements of low density polyethylene bags intended for both
domestic and commercial refuse collection and which are normally issued by and collected by local authorities or their contractors.
Reconfirmed in 1985
$34.95+GST (Members), $43.69+GST (Retail), 8 pages
NZS 7604:1981 (Withdrawn)

NZS 7607:- (Superseded by AS/NZS 2924.1 & .2:1998)

NZS 7608:1987 (Withdrawn)

NZS 7609:- (Withdrawn)

NZS 7610:1991 Blue polyethylene pipes up to nominal size 63 for below ground use for potable water
Specifies requirements for small sizes of pipe in metric series diameters coloured blue for carrying potable water, especially
underground or in ducts with other services. Suitable for water authority use in respect of requirements for protecting water quality.
Identical to BS 6572:1985 with modifications for New Zealand.
Cited in BIA Approved Documents G12/AS1 and G14/VM1
Adopted Standard
$242.42+GST (Members), $303.03+GST (Retail), 16 pages
Amendment 1, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment A, 1991 $29.95+GST (Members), $37.44+GST (Retail)

NZS 7641:1978 (Superseded by AS/NZS 1260:1996)

NZS 7642:1971 (Superseded by AS/NZS 1260:1996)

NZS 7643:1979 Code of practice for the installation of unplasticized PVC pipe systems
Sets out the methods of installation of UPVC pipelines above or below ground for pressure and non-pressure applications using pipe
and fittings complying with NZS 7641, NZS 7642 and NZS 7649.
Reconfirmed in 1985; Reprinted to append Amendment 1:1992
Cited in BIA Approved Documents B1/AS1, E1/AS1, G12/AS1, G13/AS1/AS2 and G14/VM1
$64.95+GST (Members), $81.19+GST (Retail), 43 pages
Amendment 1, 1992 $29.95+GST (Members), $37.44+GST (Retail)

NZS 7646:1978 Specification for polyethylene pipes and fittings for gas reticulation
Specifies the material, dimensions, properties, tests, colour and marking requirements for polyethylene pipes and fusion fittings for
use in gas mains and services. Provides for 5 classes of pipe having standard dimension ratios (SDR) of 11, 17, 21, 26 and 32
suitable for maximum pressures of 100 to 420 kPa.
Cited in BIA Approved Document G10/AS1
$44.95+GST (Members), $56.19+GST (Retail), 23 pages

NZS 7647:1979 (Withdrawn)

NZS 7648:1987 (Superseded by AS/NZS 1477:1996)

NZS 7649:1988 (Superseded by AS/NZS 1260:2002 and AS/NZS 1254:2002.)

NZS 7650:1975 (Withdrawn)

NZS 7651:1976 Specification for polythene film for packaging and allied purposes
Covers the dimensions, properties, tests and marking requirements for flexible unsupported flat or tubular polythene film of low
density up to 250 micrometres thick and 2000 mm wide intended for packaging and allied purposes. Provides for 3 impact resistant
grades, 3 clarity grades and 4 grades of slip.
Reconfirmed in 1985
$49.95+GST (Members), $62.44+GST (Retail), 26 pages

NZS 7652:1976 (Withdrawn)

NZS 7701:1973 (Withdrawn)

NZS 7702:1989 Specification for colours for identification, coding and special purposes
Specifies numbers and names and illustrates 84 standard colours. The colours do not constitute a co-ordinated range and are not
limited to any particular medium (e.g. paint, plastics, etc.). Retains 23 colours from the previous edition now regarded as
obsolescent. Identical to BS 381C:1988 with modifications for New Zealand.
Cited in Pesticides (Vertebrate Pest Control) Regulation 1983
Adopted Standard
$393.94+GST (Members), $492.43+GST (Retail), 28 pages
Amendment A, 1989 $29.95+GST (Members), $37.44+GST (Retail)

NZS 7703:1985 (Superseded by AS/NZS 2311:2000)

NZS/ISO 7776:1986 (Withdrawn)

AS/NZS 7799.2:2003 (Superseded by AS/NZS ISO/IEC 27001:2006)

NZS/ISO 7809:1984 (Superseded by AS/NZS 2751)

NZS 7841:1972 (Withdrawn)

NZS 7842:1973 (Withdrawn)

NZS 7901:2008 Electricity and gas industries - Safety management systems for public safety
Provides guidance to owners and operators of electricity generation, transmission, or distribution network assets, or gas distribution
assets, who are required by statute to have a Safety Management System (SMS).
$89.95+GST (Members), $112.44+GST (Retail), 47 pages

NZS/ISO 7942:1985 Information processing systems - Computer graphics - Graphical Kernel System (GKS)
functional description
Specifies a set of functions for computer graphics programming, the Graphical Kernel System (GKS). GKS is a basic graphics
system for applications that produce computer generated two-dimensional pictures on line graphics or raster graphics output
devices. It supports operator input and interaction by supplying basic functions for graphical input and picture segmentation and
allows storage and dynamic modification of pictures. The application program is allowed to adapt its behaviour at a workstation to
make best use of workstation capabilities. This Standard includes functions for storage on and retrieval from an external graphics
file, the functions being organized in upward compatible levels with increasing capabilities. Identical to AS 2880-1986 and ISO
7942:1985.
Adopted Standard
$417.54+GST (Members), $521.93+GST (Retail), 245 pages

NZS 8006:2006 Screening, risk assessment and intervention for family violence including child abuse and
neglect
Establishes the minimum requirements that should be met by individuals and agencies/services involved in working with families
living with family violence, child abuse or neglect. It provides a common language for these agencies/services to screen for this
behaviour, assess risk relating to these situations and provide for safety planning interventions.
$34.95+GST (Members), $43.69+GST (Retail), 94 pages
NZS 8007:2006 Gender-inclusive Job Evaluation
Supports and promotes gender equity in job evaluation. The material provided will assist with the design and implementation of fair
and transparent job evaluation processes as well as the auditing of those processes for gender inclusiveness.
$54.95+GST (Members), $68.69+GST (Retail), 35 pages

NZS/ISO 8072:1986 (Withdrawn)

NZS/ISO 8073:1988 (Superseded by AS/NZS 2912:1993)

NZS 8100:2007 Dairy herd testing


Applies to herd testing covered by the Dairy Industry (Herd Testing and New Zealand Dairy Core Database) Regulations 2001,
administered by MAF. Provides documented information on procedures and practices that must be adopted by licensed herd
testers, and provides further guidance on procedures and practices that should be followed in order to meet industry goals resulting
from herd testing. The 2007 edition supports the Amendments made to the Herd Testing Regulations to allow samples to be taken
once a day. Relaxations to allow part herd testing have also been incorporated.
$109.95+GST (Members), $137.44+GST (Retail), 78 pages

NZS 8100.1:2002 (Superseded by NZS 8100:2007)

NZS 8100.2:2002 (Superseded by NZS 8100:2007)

AS/NZS ISO 8124:- Safety of toys

8124.1:2002 Safety aspects related to mechanical and physical properties


This Standard is the adoption of ISO 8124-1:2000 and specifies requirements for construction of children's toys.
Reprinted to incorporate Amendment 1:2007
Cited in Product Safety Standards (Children`s Toys) Regulations 2005
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 80 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2009 $29.95+GST (Members), $37.44+GST (Retail)

8124.2:2003 Flammability
Specifies the categories of flammable materials which are prohibited in all toys and requirements concerning flammability of certain
toys when they are subjected to a small source of ignition. Reproduced with modifications from ISO 8124.2:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

8124.3:2003 Migration of certain elements


Specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of certain elements
from toy materials and from parts of toys. Identical with and reproduced from ISO 8124-3:1997.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 21 pages

8124.9:2008 Organic chemical compounds - Requirements


Specifies requirements for the migration or content of certain hazardous organic chemical compounds from/in certain toys and
materials. Identical to and reproduced from EN 71-9:2005.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

8124.10:2008 Organic chemical compounds - Sample preparation and extraction


Specifies sample preparation and extraction procedures for establishing the release from those toys for which requirements exist in
AS/NZS 8124.9. Identical to and reproduced from EN 71-10:2005.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

8124.11:2008 Organic chemical compounds - Methods of analysis


Specifies methods for the analysis of toy and toy material extracts prepared according to the sampling procedures in AS 8124.10, to
enable assessment of compliance with the chemical requirements specified in AS 8124.9. Identical to and reproduced from EN 71-
11:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

NZS 8131:1977 (Withdrawn)

NZS 8132:1984 Specification for school stationery


Specifies the basic requirements for stationery for use in primary and post-primary schools. Covers a comprehensive range of
stationery which provides a selection considered to be sufficiently wide for all classroom purposes. The range of sizes and number of
leaves was based upon the results of discussions held between the Department of Education and teachers` organizations.
Reprinted to append Amendments 1, 2 & 3
$44.95+GST (Members), $56.19+GST (Retail), 16 pages
Amendment 1, 1986 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1987 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 1990 $29.95+GST (Members), $37.44+GST (Retail)

NZS 8134 Health and disability services Standards

NZS 8134.0:2008 Health and disability services (general) Standards


NZS 8134:2008 Health and disability services Standards is mandatory for those health and disability service providers that are
subject to the Health and Disability Services (Safety) Act 2001. This Standard is also mandatory for relevant service-based contracts
that receive health funding. Where this Standard is not a requirement, its application will promote good and safe practice by
providers for consumers. NZS 8134.0:2008 Health and disability services (general) Standard contains general and reference
information for the NZS 8134:2008 Health and disability services Standards, including definitions and the audit framework. It should
be read in conjunction with Parts 1, 2, and 3. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can
also be purchased separately.
To be read in conjunction with Parts 1, 2, and 3. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part
can also be purchased separately
$24.95+GST (Members), $31.19+GST (Retail), 42 pages

NZS 8134.1:2008 Health and disability services (core) Standards


This Standard is to be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains
the definitions and audit framework information applicable across the health and disability suite. Part 1 is the result of the revision of
NZS 8134:2001 Health and Disability Sector Standards and incorporates the requirements from NZS 8143:2001 National Mental
Health Sector Standard. NZS 8134:2008 is applicable to a wide range of health and disability services and includes Standards on
consumer rights, organisational management, continuum of service delivery, and safe and appropriate environment. NZS 8134 Parts
0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can also be purchased separately.
To be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains the definitions and
audit framework information applicable across the health and disability suite. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for
use in a binder. Each part can also be purchased separately
$59.95+GST (Members), $74.94+GST (Retail), 97 pages

NZS 8134.2:2008 Health and disability services (restraint minimisation and safe practice) Standards
This Standard is to be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains
the definitions and audit framework information applicable across the health and disability suite. NZS 8134.2:2008 is the result of the
first revision of NZS 8141:2001 Restraint minimization and safe practice. It aims to reduce the use of restraint in all its forms and to
encourage the use of least restrictive practices. It provides guidance on restraint minimisation, safe restraint practice, and seclusion.
All services must meet NZS 8134.2.1. NZS 8134.2.2 and NZS 8134.2.3 will be assessed as being not applicable to a service where
restraint and seclusion are not used. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can also be
purchased separately.
To be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains the definitions and
audit framework information applicable across the health and disability suite. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for
use in a binder. Each part can also be purchased separately
$39.95+GST (Members), $49.94+GST (Retail), 45 pages

NZS 8134.3:2008 Health and disability services (infection prevention and control) Standards
This Standard is to be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains
the definitions and audit framework information applicable across the health and disability suite. NZS 8134.3 is the result of the first
revision of NZS 8142:2001 Infection control. The main intent of Part 3 is to facilitate consistently safe and quality health and disability
services, by identifying principles designed to reduce the rate of infections in the health and disability sector. It provides guidance on
infection control management, implementing the infection control programme, policies and procedures, education, surveillance, and
antimicrobial usage. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can also be purchased
separately.
To be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains the definitions and
audit framework information applicable across the health and disability suite. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for
use in a binder. Each part can also be purchased separately
$39.95+GST (Members), $49.94+GST (Retail), 65 pages

NZS 8134 Set:2008 Health and disability services Standards set


A set of four NZS 8134 Health and disability services Standards together in a ringbinder, comprising NZS 8134.0:2008,
NZS8134.1:2008, NZS 8134.2:2008 and NZS 8134.3:2008.
$164.81+GST (Members), $206.01+GST (Retail)

SNZ HB 8134.1:2001 Health and Disability Sector Standards (Residential) Audit Workbook
This audit workbook is written to assist residential homes in auditing NZS 8134:2001 Health and Disability Sector Standards. It is for
the use of both auditors and organizations completing self audits.
$44.95+GST (Members), $56.19+GST (Retail), 168 pages

SNZ HB 8134.2:2001 Health and Disability Sector Standards (Hospital) Audit Workbook
This Audit Workbook is written to assist hospitals in auditing NZS 8134:2001 Health and Disability Sector Standards. It is for the use
of both auditors and for organizations completing self audits.
$44.95+GST (Members), $56.19+GST (Retail), 168 pages

SNZ HB 8134.3:2004 Health and Disability Sector Standards (Intellectual Disability) Audit Workbook
This Audit Workbook has been developed to be used in conjunction with NZS 8134 Health and Disability Sector Standards which
Intellectual Disability residential support services will be required to meet under the Health and Disability Services (Safety) Act 2001,
by Oct 2004.
$44.95+GST (Members), $56.19+GST (Retail), 180 pages

SNZ HB 8134.4:2004 Health and Disability Sector Standards (Children and Young People) Audit Workbook
This Audit Workbook is designed to evaluate the organisation or service outcomes against those required by NZS 8134:2001 Health
and Disability Sector Standards.
$44.95+GST (Members), $56.19+GST (Retail), 232 pages

SNZ HB 8134.5:2005 Health and Disability Sector Standards - Proposed Audit Workbook and Guidance for
Residential Services for People with Dementia
Designed to evaluate the organization or service outcomes against those required by NZS 8134 Health and Disability Sector
Standards. Sets out the sector solution examples and additional information that will enable an organization to demonstrate
compliance to the Health and Disability Sector Standards by meeting the special and unique needs of people with dementia. As an
interim measure this voluntary document will be known as a Proposed Audit Workbook and Guidance.
$44.95+GST (Members), $56.19+GST (Retail), 280 pages

SNZ HB 8134.6:2006 Best Practice Guidance for Community Services for People with Dementia and Proposed
Audit Workbook
Can be applied voluntarily by organisations and support workers in home-care and day programme settings to assist people
diagnosed with dementia, their families and representatives. Provides guidance material (Guidance Parts 1 - 4) and sector solution
examples in the proposed audit workbook that define what will become current accepted good practice for dementia care in home-
care and day programme settings in the community. The focus is on the unique needs of people with dementia, their families and
representatives, and the role of support workers in the community. The aim is to promote quality care in the community, and delay or
prevent unnecessary moves into residential care. The overarching principles, guidance material and sector solutions specify the
dementia community service outcomes that are additional to those required by NZS 8158 Home and community support sector
standard and SNZ HB 8158 Home and community support sector standard audit workbook. As this document does not reiterate or
duplicate any aspect of the SNZ HB 8158 sector solutions, it will need to be used alongside SNZ HB 8158.
$44.95+GST (Members), $56.19+GST (Retail), 135 pages

NZS 8134:2001 Health and Disability Sector Standards


Addresses a number of key safety and quality issues commonly found in the health and disability sector. The monitoring of this suite
of standards is intended to replace the current Ministry of Health licensing regime and will also become a contractual requirement of
many ACC purchased health services. Because this is a generic document focusing on the basic fundamentals of quality care, the
standards are applicable to a wide range of health and disability based services. Specifically the standards include consumer rights,
organizational management, pre-entry and entry to services, service delivery, managing service delivery, safe and appropriate
environment.
Cited in Health and Disability Services (Safety) Hospital Care, Residential Disability Care, and Rest Home Care Standards Notice
2002
$54.95+GST (Members), $68.69+GST (Retail), 85 pages

NZS 8141:2001 Restraint minimization and safe practice


In recent years excellent developments in health practice have enabled a shift in focus away from restraint practice to restraint
minimization. This document aims to reflect this change in practice through an emphasis on restraint minimization and the promotion
of safe practice.
Cited in Health and Disability Services (Safety) Hospital Care, Residential Disability Care, and Rest Home Care Standards Notice
2002
$34.95+GST (Members), $43.69+GST (Retail), 44 pages

SNZ HB 8141:2004 Restraint Minimization and Safe Practice Audit Workbook


This Audit Tool is designed to evaluate the organisation or service outcomes against those required by NZS 8141:2001 Restraint
Minimization and Safe Practice.
$44.95+GST (Members), $56.19+GST (Retail), 104 pages

NZS 8142:2000 Infection control


Facilitates consistently safe, quality health and disability service delivery by identifying principles designed to reduce the rate of
infections in the health and disability sector. It is applicable to all health and disability service providers.
Cited in Health and Disability Services (Safety) Hospital Care, Residential Disability Care, and Rest Home Care Standards Notice
2002
$34.95+GST (Members), $43.69+GST (Retail), 36 pages

SNZ HB 8142:2001 Infection Control Audit Workbook


The Infection Control Audit Workbook is written to assist in auditing NZS 8142:2000 Infection Control Standard. It is for the use of
both auditors and organizations completing self audits.
$44.95+GST (Members), $56.19+GST (Retail), 72 pages

NZS 8143:2001 National Mental Health Sector Standard


This comprehensive mental health standard is the review of the National Mental Health Standards 1997. This, alongside the Health
and Disability Sector Standards, will replace the National Mental Health Standards 1997.
Cited in Health and Disability Services (Safety) Hospital Care, Residential Disability Care, and Rest Home Care Standards Notice
2002
$34.95+GST (Members), $43.69+GST (Retail), 50 pages

SNZ HB 8143:2002 National Mental Health Sector Standard Audit Workbook


This Audit Workbook is written to assist residential homes in auditing NZS 8143:2001 National Mental Health Sector Standard. It is
for both the use of auditors and for organizations completing self audits.
$44.95+GST (Members), $56.19+GST (Retail), 216 pages

SNZ HB 8149:2001 Microbiological surveillance of flexible hollow endoscopes


Currently, many flexible endoscopes undergo high-level chemical disinfection between patient use. Because of their complicated
hollow structure, these endoscopes are difficult to clean and disinfect, and infection has been reported to be transmitted to patients
through gastrointestinal or bronchoscopic procedures in hundreds of cases over the last 20 years. This Handbook deals primarily
with microbiological surveillance of flexible hollow endoscopes.
$49.95+GST (Members), $62.44+GST (Retail), 32 pages

NZS 8151:2004 Accident and Medical Clinic Standard


Provides accident and medical clinics with the information necessary to understand and implement a level and type of service that
distinguishes them from traditional general practice. The focus of the document is on patient safety and quality of service provision.
The purpose of this revision was to provide greater clarity to enable consistent implementation and auditing.
$44.95+GST (Members), $56.19+GST (Retail), 40 pages

SNZ HB 8152:2001 Sentinel Events Workbook


This workbook promotes a positive modern approach to addressing and investigating sentinel events. It assists in developing an
understanding of the root causes of a sentinel event and improving safety through effective reporting. The processes in the
workbook promote a culture of safety, where discovering and reporting mistakes, errors and close calls is rewarded and not
punished.
$39.95+GST (Members), $49.94+GST (Retail), 40 pages

NZS 8153:2002 Health records


The aim of this Standard is to inform all practitioners and service providers within public and private healthcare services, residential
facilities and other relevant services of the minimum requirements for health records. Particular emphasis is placed on individual
provider responsibility in relation to the maintenance of consumer/patient confidentiality, maintaining record security and preventing
unauthorized use.
$39.95+GST (Members), $49.94+GST (Retail), 52 pages

NZS 8156:2008 Ambulance and paramedical services


Sets appropriate standards of service covering the means by which ambulance and paramedical services are organised and
provided. Provides a means of assessing the extent to which ambulance and paramedical services are worthy of patients'
confidence and trust, through the demonstration of clinical safety, reliability, efficiencies, and effectiveness. It applies to all modes of
road vehicle where ambulance provision is the primary capability of the vehicle and to aircraft specifically equipped for ambulance
provision when being used for that purpose.
$39.95+GST (Members), $49.94+GST (Retail), 63 pages

SNZ HB 8156:2003 Ambulance Service Sector Standard Assessment Workbook


This Assessment Workbook is designed to evaluate the organisation or service outcomes against those required by NZS 8156:2002
Ambulance Sector Standards. To ensure consistent interpretation, the workbook identifies common sector solutions (systems,
processes, methods etc) as examples for each criterion. An additional key component is the Risk Assessment Matrix, which is
applied in situations of partial achievement or where the criterion is unattained.
$49.95+GST (Members), $62.44+GST (Retail), 115 pages

NZS 8157:2003 Alcohol and Other Drug Treatment Sector Standard


This Standard specifies the minimum requirements for the provision of safe Alcohol and Other Drug Services to clients. As it is
anticipated to come under the Health and Disability Services (Safety) Act 2001, it builds upon the Health and Disability Sector
Standards and the National Mental Health Sector Standard, in order to provide a consistent framework.
$39.95+GST (Members), $49.94+GST (Retail), 37 pages

NZS 8158:2003 Home and Community Support Sector Standard


This Standard establishes the minimum requirements that should be attained by providers. It is limited to health and disability
services provided in the environment of a person's home or in their community, by individuals working as support workers
accountable to a home and/ or community support service provider.
$39.95+GST (Members), $49.94+GST (Retail), 44 pages

SNZ HB 8158:2004 Home and Community Support Sector Standard Audit Workbook
This audit workbook is designed to evaluate home and community support provider outcomes against those required by NZS
8158:2002 Home and Community Support Sector Standard.
$49.95+GST (Members), $62.44+GST (Retail), 172 pages

SNZ HB 8163:2005 Indicators for safe aged-care and dementia-care for consumers
Provides a basis for enhancing the effectiveness of residential aged-care and dementia-care services by specifying a core set of
evidence based indicators. These indicators can be used to monitor and compare the performance of the service providers at an
individual as well as national level. It is expected that the information generated via these indicators will culminate at a national level,
and ultimately lead to continuous improvement of residential aged-care and dementia-care services.
$49.95+GST (Members), $62.44+GST (Retail), 64 pages

NZS 8164:2005 Day-stay surgery and procedures


Developed for organisations providing day-stay and rooms or office-based surgery or procedures and while not mandatory,
implementation will assist providers in meeting the requirements of legislation, funders and certification frameworks.
$39.95+GST (Members), $49.94+GST (Retail), 32 pages
NZS 8165:2005 Rooms/Office-based surgery and procedures
Provides an agreed definition of what constitutes rooms/office-based surgery or procedures and promotes improved safety for
patients by specifying consistent dimensions of safety in terms of patient-focused services, facility management, pre-entry and entry
to services, service delivery, and facilities.
$39.95+GST (Members), $49.94+GST (Retail), 32 pages

SNZ HB 8169:2002 Health Network Code of Practice


The purpose of the Health Network Code of Practice is to describe how healthcare organizations can safely exchange electronic
health information (EHI) over a secure network intended for this purpose.
Reprinted to incorporate Amendment 1:2006
$39.95+GST (Members), $49.94+GST (Retail), 36 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

SNZ PAS 8170:2005 Primary Healthcare Practice Management Systems: Publicly Available Specification
The specifications in this document define the functionality expected of the Primary Healthcare Practice Management Systems
(PHCPMS) which when implemented will assist practices to meet current and future PHCPMS requirements. The specifications are
voluntary for the PHCPMS vendor to implement and are guidelines for purchasers of practice management systems. They also
provide a framework for change that will apply to IT changes, no matter where the request originated.
$39.95+GST (Members), $49.94+GST (Retail), 48 pages

NZS 8171:2005 Allied health services sector standard


Specifies consistent dimensions of safety for allied health service providers in terms of consumer focused services, organizational
management, pre-entry to services, service delivery, managing service delivery and provision of a safe and appropriate environment.
$39.95+GST (Members), $49.94+GST (Retail), 48 pages

SNZ HB 8171 Allied Health Services Sector Standard

SNZ HB 8171.1:2005 Allied Health Services Sector Standard - Physiotherapy Services Audit Workbook
Designed to set out the sector solutions, examples and additional information that will enable physiotherapy practices, in both public
and private health and disability settings, to demonstrate compliance with the Allied Health Services Sector Standard NZS 8171:
2005, while meeting the special and unique needs of New Zealanders seeking physiotherapy services.
$49.95+GST (Members), $62.44+GST (Retail), 180 pages

SNZ HB 8171.1:2005 CDROM Version Allied Health Services Sector Standard - Physiotherapy Services Audit
Workbook, Electronic Tool Version
Allows both the Practice and the Auditor to complete the audit workbook by using a series of drop down menus to demonstrate
compliance with and audit against Allied Health Services Sector Standard NZS 8171:2005. Included in the tool kit are the user guide,
electronic template and installation instructions. Not available to view online but can be delivered either via a CD Rom or e-mail.
$94.95+GST (Members), $118.69+GST (Retail)

SNZ HB 8171.2:2005 Allied Health Services Sector Standard - Chiropractic Services Audit Workbook
Applies to Chiropractors working in private practice as a primary contact health care provider. It has been designed to set out sector
solutions, examples and additional information that will enable chiropractic offices, clinics and institutions to demonstrate compliance
with the Allied Health Services Sector Standard NZS 8171: 2005 while meeting the special and unique needs of New Zealanders
seeking chiropractic services.
$49.95+GST (Members), $62.44+GST (Retail), 159 pages

SNZ HB 8171.2:2005 CDROM Version Allied Health Services Sector Standard - Chiropractic Services Audit
Workbook, Electronic Tool Version
Allows both the Practice and the Auditor to complete the audit workbook by using a series of drop down menus to demonstrate
compliance with and audit against Allied Health Services Sector Standard NZS 8171:2005. Included in the tool kit are the user guide,
electronic template and installation instructions. Not available to view online but can be delivered either via a CD Rom or e-mail.
$94.95+GST (Members), $118.69+GST (Retail)

NZS 8181:2007 Fertility Services


Achieves the requirements of the Human Assisted Reproductive Technology (HART) Act 2004, and builds on the existing co-
operation among specialists and health practitioners in the developing area of fertility services provision. Along with the associated
audit workbook, it defines the quality and safety requirements for the provision of fertility services in New Zealand.
$44.95+GST (Members), $56.19+GST (Retail), 88 pages
SNZ HB 8181:2007 Fertility Services Audit Workbook
Achieves the requirements of the Human Assisted Reproductive Technology (HART) Act 2004, and builds on the existing co-
operation among specialists and health practitioners in the developing area of fertility services provision. This Audit workbook
establishes the degree of attainment against NZS 8181 Fertility Services Standard. It identifies areas of compliance, and/or areas
requiring improvement in order to reduce the risk of serious failure impacting on service delivery.
$59.95+GST (Members), $74.94+GST (Retail), 188 pages

NZMP 8201:1993 A guide to abbreviations in Standards work


Provides a list of abbreviations of Standards organizations and standard designations for use in Standards work.
$34.95+GST (Members), $43.69+GST (Retail), 38 pages

NZS/ISO 8208:1987 (Superseded by AS/NZS 3621)

NZS 8302:1980 Reference method for the evaluation of disinfectants


Provides a reference test for disinfectants against which routine test methods can be compared. Is intended to replace the now
rather antiquated phenol coefficient method as a general reference point for all disinfectant purposes. The present method is not
however suitable for aldehyde based disinfectants.
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

NZS 8311:1970 Method for the determination of the relative milk-coagulating power of rennet solutions
Describes a method for the comparison of the coagulating powers of rennets of unknown strengths, with each other or with a
reference rennet, by using a defined substrate under the specific conditions set out.
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

NZS/ISO 8326:1987 (Withdrawn)

NZS/ISO 8327:1987 (Withdrawn)

NZS 8341:1972 Specification for dairy iodophors


Establishes the basic requirements for three types of iodophors used in the dairy industry, namely: Type A, for general purpose use
on all dairy equipment; Type B, for stainless steel plant only; and Type C, for application to the teats of cows.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

NZS/ISO 8348:1987 (Superseded by AS/NZS 2994)

NZS 8401:1988 Treatment, grading and classification of hides and calfskins


Establishes the treatment, grading and classification of hides and calfskins. Specifies the weight ranges for offerings by public tender
and the cataloguing and exhibition of lots for public auction.
Incorporating Amendments No. 1 and No. 2
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 8402:1974 Code of practice for the handling, processing and distribution of fish
Establishes the hygienic and quality requirements for the handling, processing and distribution of fin fish intended for human
consumption, either directly or after further processing. Recommended cleaning and sanitizing procedures, water quality standards
and a name list of fish species are appended.
$44.95+GST (Members), $56.19+GST (Retail), 35 pages

AS/NZS ISO 8402:1994 (Superseded by AS/NZS ISO 9000:2000)

NZS 8403:1987 Classification of meat carcasses for sale on the New Zealand market
Covers animal classification and meat grades of carcasses available for sale on the New Zealand market.
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

NZS 8404:1975 Specification for the treatment, grading and classification of freezer and abattoir quality
green hides
Establishes the treatment, grading and classification of freezer and abattoir quality green hides.
Reprinted to append Amendment 1:1986
$34.95+GST (Members), $43.69+GST (Retail), 7 pages
Amendment 1, 1986 $29.95+GST (Members), $37.44+GST (Retail)

NZS 8405:1975 Code of practice for the handling, processing, storage and distribution of molluscan
shellfish
Establishes hygienic and quality requirements for the handling, processing, storage and distribution of molluscs intended for human
consumption, either directly or after further processing. Recommended cleaning and sanitizing procedures and bacteriological water
quality are appended.
$34.95+GST (Members), $43.69+GST (Retail), 14 pages

NZS 8406:1975 Code of practice for the handling, processing, storage and distribution of fresh and frozen
rock lobsters and frozen rock lobster tails
Establishes requirements for the handling, processing, storage and distribution of live lobsters, cooked whole lobsters, frozen cooked
whole lobsters and frozen lobster tails. Recommended cleaning and sanitizing procedures and bacteriological water quality are
appended.
$44.95+GST (Members), $56.19+GST (Retail), 20 pages

NZS 8407:1985 (Withdrawn)

NZS 8409:2004 Management of agrichemicals


Provides practical and specific guidance on the safe, responsible and effective management of agrichemicals, including plant
protection products (herbicides, insecticides, fungicides), veterinary medicines, fumigants used in rural situations and agricultural use
of detergents and sanitizers. The main changes are due to the application of the Hazardous Substances and New Organisms
(HSNO) Regulations. New information on emergency preparedness and sale of agrichemicals has been added and the section on
product data moved to an Appendix.
Approved Trainers can purchase a pack of 15 copies at $69.95 per copy
$149.95+GST (Members), $187.44+GST (Retail), 195 pages

NZS 8410:2003 Organic production


Sets out the minimum requirements for the production, handling, processing and labelling of organic products including plants and
plant products, and animals and animal products.
$59.95+GST (Members), $74.94+GST (Retail), 84 pages

NZS 8441:1993 Grades for vegetables at the first point of sale


Establishes minimum requirements for vegetables at the first point of sale. Requirements are given in separate chapters for each
type of vegetable. 1993 edition of NZS 8441:1972 incorporating Amendments No. 1 and No.2.
$34.95+GST (Members), $43.69+GST (Retail), 54 pages

NZS/ISO 8471:1987 (Withdrawn)

NZS/ISO 8481:1986 (Withdrawn)

NZS/ISO 8482:1987 (Withdrawn)

NZS 8500:2006 Safety barriers and fences around swimming pools, spas and hot tubs
Assists people to avoid a swimming pool related drowning by presenting various options designed to deny, delay, or detect
unsupervised entry to the swimming pool area. Options for the location of effective safety barriers that will restrict the access of
young children to swimming pools are provided, and requirements for the design, construction and performance of fences, gates,
retaining walls and door sets intended to form a barrier to restrict access of young children to swimming pools are specified. This
Standard is intended to become a compliance document under the Building Code for new pools and to be used by territorial
authorities in developing safe solutions for existing pools.
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

NZS/ISO TR8509:1987 (Withdrawn)

NZS 8541:1971 (Withdrawn)

NZS 8600:2002 All-terrain vehicle helmets


Describes the minimum performance requirements for the manufacture of a robust multi-purpose lightweight protective helmet, which
reduces the severity of head injuries arising from the use of All-terrain vehicles.
Reprinted to append Ammendment 1:2003
$59.95+GST (Members), $74.94+GST (Retail), 20 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

NZS 8601:1977 (Superseded by NZS 8602)

NZS/ISO 8601:1988 Data elements and interchange formats - Information interchange - Representation of dates
and times
Specifies the representation of dates in the Gregorian calendar and times and representations of periods of time. Does not assign
any particular meaning or interpretation to any data element that used representations in accordance with this Standard. Such
meaning will be determined by the context of the application. Does not cover dates and times where words are used in the
representation. Identical to AS 3802-1989 and ISO 8601:1988.
Adopted Standard
$44.89+GST (Members), $56.11+GST (Retail), 14 pages

NZS 8602:1989 (Superseded by AS/NZS 3838:1998)

NZS/ISO 8602:1987 (Withdrawn)

NZS 8603:2005 Design and application of outdoor recreation symbols


Will assist in the management of outdoor sports and recreation and will help inform visitors and identify risks associated with outdoor
recreation. Provides a comprehension tested set of symbols. Also includes a CD containing low resolution images of the symbols.
$149.95+GST (Members), $187.44+GST (Retail), 90 pages

NZS/ISO 8613: (Withdrawn)

SNZ HB 8630:2004 Tracks and outdoor visitor structures


Provides specifications for those responsible for designing, constructing, maintaining, and/or managing tracks and outdoor visitor
structures. Use of these specifications will ensure that tracks and outdoor visitor structures provide the right level of service to meet
visitor recreation and safety needs, and will help protect the facilities and the environment from damage.
$139.95+GST (Members), $174.94+GST (Retail), 81 pages

NZS/ISO-IEC 8631:1989 (Withdrawn)

NZS/ISO 8632:- Computer graphics - Metafiles for the storage and transfer of picture description
information

Part 1:1987 Functional specifications


Specifies functional requirements for computer graphics metafile which provides a file format suitable for the storage and retrieval of
picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is compatible
between systems of different architecture and devices of differing capabilities and design. Identical to AS 3603.1-1988 and ISO
8632.1:1987.
Adopted Standard
$152.28+GST (Members), $190.35+GST (Retail), 144 pages

Part 2:1987 Character encoding


Specifies requirements for character encoding computer graphics metafile which provides a file format suitable for the storage and
retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is
compatible between systems of different architecture and devices of differing capabilities and design. Identical to AS 3603.2-1988
and ISO 8632.2:1987.
Adopted Standard
$106.25+GST (Members), $132.81+GST (Retail), 60 pages

Part 3:1987 Binary encoding


Specifies requirements for binary encoding for computer graphics metafile which provides a file format suitable for the storage and
retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is
compatible between systems of different architecture and devices of different capabilities and design. Identical to AS 3603.3-1988
and ISO 8632.3:1987.
Adopted Standard
$89.20+GST (Members), $111.50+GST (Retail), 50 pages

Part 4:1987 Clear text encoding


This part specifies requirements for clear text encoding for computer graphics metafile which provides a file format suitable for
storage and retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a
way that is compatible between systems of different architecture and devices of differing capabilities and design. Identical to AS
3603.4-1988 and ISO 8632.4:1987.
Adopted Standard
$78.41+GST (Members), $98.01+GST (Retail), 33 pages

NZS/ISO 8648:1988 (Withdrawn)

NZS/ISO 8649:1988 (Withdrawn)

NZS/ISO 8650:1988 (Withdrawn)

NZS/ISO 8651:- Computer graphics - Graphical Kernel System (GKS) language bindings

Part 1:1988 FORTRAN


Specifies a standard binding for the FORTRAN computer programming language under the Graphical Kernal System (GKS), the
functional description to which is given in NZS/ISO 7942 Computer graphics - Graphics Kernel System (GKS). Identical to AS
3642.1-1989 and ISO 8651.1:1988.
Adopted Standard
$152.28+GST (Members), $190.35+GST (Retail), 116 pages

Part 2:1988 Pascal


Specifies a standing binding for the Pascal computer programming language under the Graphical Kernel System (GKS), the
functional description of which is given in NZS/ISO 7942 Computer graphics - Graphical Kernel System (GKS). Identical to AS
3642.2-1989 and ISO 8651.2:1988.
Adopted Standard
$172.73+GST (Members), $215.91+GST (Retail), 168 pages

Part 3:1988 Ada


Specifies a language independent nucleus of a graphical system. For integration into a programming language, GKS is imbedded in
a language independent layer obeying the particular conventions of that language. This part specifies such language-dependent
layer for the Ada language. Identical to AS 3642.3-1989 and ISO 8651.3:1988.
Adopted Standard
$172.73+GST (Members), $215.91+GST (Retail), 184 pages

SNZ HB 8669:2004 Guidelines for risk management in sport and recreation


This Guide promotes the use and benefits of good risk management practices across all aspects of sport and recreation
organisations, from strategic and operational management to planning and delivering events. The Guide provides a broad approach,
including definitions, processes, tools and examples to help sport and recreation organisations understand and implement risk
management. It provides an overview of the generic risk management process as defined in AS/NZS 4360, along with guidance to
enable the user to apply this process in the New Zealand sport and recreation context.
$49.95+GST (Members), $62.44+GST (Retail), 61 pages

NZS 8690:2003 Water safety signage


Water safety signage has an important role to play in the implementation of preventative safety measures. Signs inform the public of
dangers, safety concerns or other information that may be relevant to them. This standard provides a consistent basis for the
development and use of water safety signage within New Zealand that aims to reduce the risk of drownings and injuries. This
standard comes with a low resolution image CD.
$84.95+GST (Members), $106.19+GST (Retail), 43 pages

NZS 8690:2003 Water safety signage: CD ROM version


This is a high resolution compact disc which can be used to produce signs directly. Also contains a full copy of the standard
NZS8690:2003 - Water Safety Signage.
$159.95+GST (Members), $199.94+GST (Retail)

NZS 8701:1971 (Withdrawn)

NZS 8702:1978 (Withdrawn)

NZS 8703:1977 (Withdrawn)

NZS 8704:1989 Low fire danger fabrics for domestic apparel


Sets out the requirements for low fire danger fabrics. Fabrics which comply with this Standard, because of their fibre content, weight
and other factors, do not easily ignite and burn slowly. Suitable for childrens` night clothes including those of Category 1 for NZS
8705.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

NZS 8705:1989 (Superseded by AS/NZS 1249:1999)

NZS 8707:1984 Method for the measurement of the colour of wool


Sets out a method for determining the colour of wool by the use of a tristimulus colorimeter, the wool being in the form of corings
taken from bales. The procedure for the preparation of the wool before measurement is also described.
Reprinted to incorporate Amendment 1:1990 and append Amendment 2:1993
$44.95+GST (Members), $56.19+GST (Retail), 17 pages
Amendment 1, 1990 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1993 $29.95+GST (Members), $37.44+GST (Retail)

NZS 8709: (Superseded by AS/NZS 3744 Parts 1 to 3:1998)

NZS 8710:1984 (Superseded by NZS/AS 2479)

NZS 8711:1986 (Withdrawn)

NZS 8716:1994 Method for the measurement of the bulk of raw wool
Sets out in detail the method for determining the bulk of raw wool using a bulkometer which places a known pressure onto a sample
of wool and gives specific volume. Also provides the basis for calibrating the test results from a testing line by the use of reference
wools.
$59.95+GST (Members), $74.94+GST (Retail), 30 pages
NZS 8719:1992 Method for the measurement of the fibre length after carding of scoured wool
Sets out method for determining fibre length after carding and gilling of scoured wool using the Almeter system, the wool initially
being in the form of grab samples taken mechanically. Procedures for sampling and preparation of wool before measurement are
also described.
Reprinted to append Amendment 1:1997
$84.95+GST (Members), $106.19+GST (Retail), 44 pages
Amendment 1, 1997 $29.95+GST (Members), $37.44+GST (Retail)

NZS 8720:1992 (Withdrawn)

NZS 8721:1988 (Superseded by AS/NZS 1957:1998)

NZS 8722:1988 (Superseded by AS/NZS 2621:1998)

NZS 8771:1973 (Withdrawn)

NZS 8772:1973 (Withdrawn)

NZS 8773:1973 (Withdrawn)

NZS 8774:1973 (Withdrawn)

NZS 8775:1974 (Withdrawn)

NZS 8776:1973 (Withdrawn)

NZS 8777:1973 (Superseded by NZS 5827:1988)

NZS 8800:2006 Guide to Identifying Dog Breeds - A4 Edition


Provides a "how to" or "code of practice" approach to enable consistent identification and data capture of prominent and secondary
breed and colour of dogs by animal control officers. This will assist with accurate identification of breeds/types of dog listed in
schedule 4 of the Dog Control Act 1996. Also available in a convenient A5 version.
$84.95+GST (Members), $106.19+GST (Retail), 49 pages

NZS 8800:2006 Guide to Identifying Dog Breeds - A5 Edition


Provides a "how to" or "code of practice" approach to enable consistent identification and data capture of prominent and secondary
breed and colour of dogs by animal control officers. This will assist with accurate identification of breeds/types of dog listed in
schedule 4 of the Dog Control Act 1996. Also available in an A4 version.
$84.95+GST (Members), $106.19+GST (Retail), 49 pages

NZS/ISO-IEC 8802.2-1990 (Superseded by AS/NZS 4802.2:1996)

NZS/ISO-IEC 8802.3-1990 (Superseded by AS/NZS 4802.3:1994)

NZS/ISO 8805:1988 (Withdrawn)

NZS/ISO 8821:1989 (Withdrawn)


NZS/ISO 8822:1988 (Withdrawn)

NZS/ISO 8823:1988 (Withdrawn)

NZS/ISO-IEC 8824:1990 (Superseded by AS/NZS 8824.1:1998)

AS/NZS 8824:- Information technology - Abstract syntax notation one

8824.1:1998 Specification of basic notation


Specifies a standard notation called abstract syntax notation one (ASN.1) that is used for the definition of data types, values and
constraints on data types. This Standard is identical with and has been reproduced from ISO/IEC 8824-1:1995.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 105 pages

8824.2:1998 Information object specification


Specifies a notation known as abstract syntax notation one (ASN.1) that allows information object classes as well as individual
information objects and information object sets thereof to be defined and given reference names. This Standard is identical with and
has been reproduced from ISO/IEC 8824-2:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

8824.3:1998 Constraint specification


Specifies a notation to be used for specifying table constraints (including component relation constraints) and user-defined
constraints. This Standard is identical with and has been reproduced from ISO/IEC 8824-3:1995.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 8 pages

8824.4:1998 Parameterization of ASN.1 specifications


Specifies a notation for parameterization of ASN.1 specifications. This Standard is identical with and has been reproduced from
ISO/IEC 8824-4:1995.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

NZS/ISO-IEC 8825:1990 (Superseded by AS/NZS 8825.1:1998)

AS/NZS 8825:- Information technology - ASN.1 encoding rules

8825.1:1998 Specification of basic encoding rules, canonical encoding rules and distinguished
encoding rules
Specifies the definition of encoding rules that may be applied to values of types defined using the ASN.1 notation. It is implicit in the
specification of these encoding rules that they are also to be used for decoding. This Standard is identical with and has been
reproduced from ISO/IEC 8825-1:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages

8825.2:1998 Specification of packed encoding rules


Specifies a set of encoding rules (packed encoding rules) which may be used to derive a transfer syntax for type values defined
using ASN.1 notation. This Standard is identical with and has been reproduced from ISO/IEC 8825-2:1996.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 40 pages

NZS/ISO 8831:1988 (Superseded by AS/NZS 3697)

NZS/ISO 8832:1989 (Superseded by AS/NZS 3698)

NZS/ISO 8877:1987 (Superseded by AS/NZS 3594)


NZS/ISO 8878:1987 (Superseded by AS/NZS 3604)

NZS/ISO 8879:1986 Information processing - Text and office systems - Standard Generalized Markup Language
(SGML)
Specifies the following: (a) an abstract syntax known as the Standard Generalized Markup Language (SGML). The language
expresses the description of a document`s structure and other attributes, as well as other information that makes the markup
interpretable; (b) a reference concrete syntax that binds the abstract syntax to specific characters and numerical values, and criteria
for defining variant concrete syntaxes, and (c) conforming documents in terms of their use of components of the language and
systems in terms of their ability to process conforming documents and to recognize markup errors in them. The Standard also
specifies how data such as images, graphics, or formatted text (not defined by the Standard) can be included in a conforming
document. Identical to AS 3514-1987 and ISO 8879:1986.
Adopted Standard
$152.28+GST (Members), $190.35+GST (Retail), 155 pages

NZS/ISO 8885:1987 (Superseded by AS/NZS 3624)

AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary


Provides guidance on the fundamentals of quality management systems as described in the ISO 9000 series of Standards and
vocabulary of terms used in quality management. This Standard is identical with and has been reproduced from ISO 9000:2005,
which incorporates the changes accepted in the ISO Draft Amendment, ISO/DAM 9000:2004.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

AS/NZS ISO 9000.1:1994 (Superseded by AS/NZS ISO 9000:2000)

AS/NZS ISO 9000.2:1998 Quality management and quality assurance standards - Generic guidelines for the
application of ISO 9001, ISO 9002 and ISO 9003
Provides guidelines to assist users in understanding and applying the requirements of AS/NZS ISO 9001, 9002 and 9003 and to
improve consistency in their interpretation and application. This Standard is technically equivalent to and has been reproduced from
ISO 9000-2:1997. Includes an Australian/New Zealand appendix which provides additional guidance in the form of a series of
questions which address the requirements of ISO 9001.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 64 pages

AS/NZS 9000.3(Int):1998 (Superseded by AS/NZS ISO 9000:2000)

NZS 9000.4:1994 (Withdrawn)

AS/NZS ISO 9001:2008 Quality management systems - Requirements


Specifies requirements for a quality management system where an organisation needs to demonstrate its ability to consistently
provide product that meets customer and applicable statutory and regulatory requirements, and aims to enhance customer
satisfaction through the effective application of the system. This includes processes for continual improvement of the system and the
assurance of conformity to customer and applicable statutory and regulatory requirements. Identical to ISO 9001:2008.
Joint Australian/New Zealand Standard
$97.95+GST (Members), $122.44+GST (Retail), 40 pages

AS/NZS ISO 9002:1994 (Superseded by AS/NZS ISO 9001:2000)

AS/NZS ISO 9003:1994 (Superseded by AS/NZS 9001:2000)

AS/NZS ISO 9004:- Quality management and quality system elements


9004:2000 Quality management systems - Guidelines for performance improvements
Provides guidance on applying quality management systems to the achievement of performance improvement. This extends beyond
the requirements of AS/NZS ISO 9001 to the overall performance of the organization and the satisfaction of customers and other
interested parties. This Standard is identical with and has been reproduced from ISO 9004:2000.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 56 pages

9004.1:1994 (Superseded by AS/NZS ISO 9004:2000)

9004.2:1992 (Withdrawn - use SAA HB90.2-2000)

9004.3:1994 Guidelines for processed materials


Provides a basic guide to quality system elements applicable to processed materials, such as bulk products, and discusses means of
ensuring effective quality management. This standard is identical to ISO 9004.3:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

9004.4:1994 Guidelines for quality improvement


Provides a set of management guidelines for implementing continuous quality improvement within an organization. Describes tools
and techniques for a quality improvement methodology based on data collection and analysis. This standard is identical to ISO
9004.4:1993.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

9004.5:1998 (Superseded by AS/NZS ISO 10005:2006)

NZS/ISO 9067:1987 (Withdrawn)

NZS/ISO 9069:1988 Information processing - SGML support facilities - SGML document interchange format
(SDIF)
Specifies a data structure known as the SGML Document Interchange Format (SDIF). SDIF enables a document conforming to ISO
8879 which might be stored in several entities, to be packed into a data stream for interchange in a manner that will permit the
recipient to reconstitute the separate entities. SDIF also allows related documents to be included in the data stream, such as
covering letters, transmittal forms, catalogue cards, formatting procedures, or the 'document profile' required by a document
architecture. Identical to AS 3649-1990 and ISO 9069:1988.
Adopted Standard
$34.09+GST (Members), $42.61+GST (Retail), 8 pages

NZS/ISO-IEC 9072: (Withdrawn)

NZS/ISO-IEC 9075:1989 (Superseded by AS/NZS 3968)

AS/NZS ISO/IEC 9126 Software engineering - Product quality

9126.1:2005 Quality model


Provides information that enables software product quality to be specified and evaluated from different perspectives by those
associated with acquisition, requirements, development, use, evaluation, support, maintenance, quality assurance and audit of
software. Identical to and reproduced from ISO/IEC 9126-1:2001.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

9126.2:2005 External metrics


Users of this Technical Report can select or modify and apply metrics and measures from this Technical Report or may define
application-specific metrics for their individual application domain. Identical to and reproduced from ISO/IEC TR 9126-2:2003.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 100 pages

9126.3:2005 Internal metrics


Provides internal metrics for quantitatively measuring external software quality in terms of characteristics and sub-characteristics
defined in AS/NZS ISO/IEC 9126.1. It is intended to be used together with AS/NZS ISO/IEC 9126.1. Identical to and reproduced
from ISO/IEC TR 9126-3:2003.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 76 pages

9126.4:2005 Quality in use metrics


Provides and defines quality in use metrics for the characteristics defined in AS/NZS ISO/IEC 9126.1. It is intended to be used
together with AS/NZS ISO/IEC 9126.1. Identical to and reproduced from ISO/IEC TR 9126-4:2003.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 72 pages

NZS/ISO 9127:1988 (Withdrawn)

NZS 9201:- Model general bylaws

9201.1:2007 Introduction
The NZS 9201 series are model bylaws covering various matters under local authority jurisdiction. The revision of the 1999 Bylaw
has been necessary to reflect the legislative changes, particularly the Local Government Act 2002, the Building Act, the Resource
Management Act and the Dog Control Act. Part One contains definitions and provisions of a general nature which apply to all parts of
the Model General Bylaws. References to Statutes have been updated and some definitions have been revised or added.
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

9201.2:1999 Public places


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 16 pages

9201.3:1999 Hostels
Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

9201.4:1999 Trading in public places


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

9201.5:1972 (Withdrawn)

9201.6:1999 Solid waste


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

9201.7:2007 Water supply


Provides a model for local authorities to use as the basis of a bylaw to regulate and control water supply. NZS 9201.7 provides a
general model so that by means of specific modifications each local authority may meet its individual requirements. Small local
authorities should be able to use the document with minimal modification and without undertaking substantial investigations.
Reference should be made to NZS 9201: Part 1 and to the legislation referenced under Referenced Documents for any other
definitions not included in this Part.
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

9201.8:1999 Control of advertising signs


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

9201.9:1972 (Withdrawn)

9201.10:1972 (Withdrawn)
9201.11:2000 Fires in the open air
Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

9201.12:1999 Control of dogs


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

9201.13:1999 The keeping of animals, poultry and bees


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

9201.14:1999 Cemeteries and crematoria


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 12 pages

9201.15:1999 (Withdrawn)

9201.16:1999 (Withdrawn)

9201.17:1972 (Withdrawn)

9201.18:1972 (Withdrawn)

9201.19:1972 (Withdrawn)

9201.20:1975 (Withdrawn)

9201.22:1999 Wastewater drainage


Contains provisions in the form of model bylaws for wastewater drainage from both domestic and trade premises to a Wastewater
Authority.
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

9201.23:2004 Trade waste


Provides a suitable model for all Territorial Authorities when dealing with trade waste discharges, which are empowered under Part 8
of the Local Government Act 2002 to make bylaws. The bylaw also includes a Guideline, which should be read in conjunction with it.
$119.95+GST (Members), $149.94+GST (Retail), 84 pages

9201.24:1999 Food safety


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 8 pages

9201.25:2007 Traffic
Sets out the requirements for parking and control of vehicular or other traffic on any road within the jurisdiction of the Council.
Reference should be made to NZS 9201: Part 1 Introductory and to the legislation referenced under Referenced Documents, for any
other definitions not included in this Part. Provides a general model so that by means of specific modifications each local authority
may meet its individual requirements. Small local authorities should be able to use the document with minimal modification and
without undertaking substantial investigations.
$39.95+GST (Members), $49.94+GST (Retail), 24 pages

9201.27:2000 On-site wastewater disposal systems


Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$34.95+GST (Members), $43.69+GST (Retail), 9 pages

9201.28:2007 Speed
Sets speed limits on roads within the jurisdiction of the local authority, as defined in the Local Government Act 2002. Reference
should be made to NZS 9201: Part 1 Introductory and to the legislation referenced under New Zealand Legislation for any other
definitions not included in this Part. This Model Bylaw incorporates a range of existing practices from throughout the country. It has
been drafted to provide a general model so that by means of specific modifications each local authority may meet its individual
requirements. Small local authorities should be able to use the document with minimal modification and without undertaking
substantial investigations.
$39.95+GST (Members), $49.94+GST (Retail), 28 pages

9201.29:2007 Liquor control


Intended to produce greater consistency in Liquor Control Bylaws, the Standard covers such matters as specification of public
places, days and times where the Bylaw applies, the powers of the police and exemptions to the Bylaw, and should be read in
conjunction with the Local Government Act 2002, sections 147, 169 and 170.
$39.95+GST (Members), $49.94+GST (Retail), 17 pages

NZS 9202:2003 Model Standing Orders for Meetings of Local Authorities and Community Boards
Sets down standing orders for the conduct of proceedings at meetings of local authorities and community boards in the form of
model orders for adoption with or without amendment. Incorporates amendments to the Local Government Act 2002 and the Local
Government Official Information and Meetings Act 1987 as they affect the provisions of the model standing orders.
Reprinted to incorporate Amendment 1:2006
Cited in Civil Defence Emergency Management Act 2002
$59.95+GST (Members), $74.94+GST (Retail), 64 pages
Amendment 1, 2006 $34.95+GST (Members), $43.69+GST (Retail)

NZS 9202:2003 Pack Model Standing Orders for Meetings of Local Authorities and Community Boards
A pack of ten Model Standing Orders for the conduct of proceedings at meetings of local authorities and community boards.
$395.00+GST (Members), $493.75+GST (Retail)

NZS 9203:1979 Model bylaw for Catchment Authorities - Regional Water Boards
Contains provisions in the form of a model bylaw in relation to sections of the Soil Conservation and Rivers Control Act 1941 and the
Water and Soil Conservation Act 1967for use by Catchment Authorities and Regional Water Boards.
$34.95+GST (Members), $43.69+GST (Retail), 21 pages

NZMP 9204:1993 Model standing orders for meetings of public bodies


Sets down procedures for the conduct of meetings of publicly elected and appointed boards and councils in the form of model
standing orders for adoption with or without amendment. Incorporates changes due to amendments to the Local Government Official
Information and Meetings Act. Designed to be used by all publicly elected boards and councils and their committees other than local
authorities. (See NZS 9202 for local authorities).
$44.95+GST (Members), $56.19+GST (Retail), 40 pages

SNZ HB 9213:2003 Guide to Local Government Service Delivery Options


This Guide is to assist local authorities in the process of selecting, reviewing and implementing appropriate methods of delivering
services.
$109.95+GST (Members), $137.44+GST (Retail), 88 pages

NZS 9231:1971 Model bylaw for fire prevention


Contains provisions in the form of a model bylaw for the prevention of fire, the protection of persons and property from fire risks, and
the safeguarding of premises by the installation of adequate first-aid fire-fighting equipment.
Reprinted to append Amendment 1:1973 and Amendment 2:1979
$34.95+GST (Members), $43.69+GST (Retail), 14 pages
Amendment 1, 1973 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 1979 $29.95+GST (Members), $37.44+GST (Retail)

NZS 9232:1991 Model bylaw for precautions against fire and panic in cinemas, theatres and places of
assembly
Contains provisions in the form of a model bylaw for precautionary measures against fire and panic in buildings required to be
licensed by the Local Government Act 1974. Sets requirements for qualified persons to take charge based on the number of persons
occupying a licensed building.
Reprinted to incorporate Corrigendum 1:1994
Cited in Fire Safety and Evacuation of Buildings Regulations 1992
$44.95+GST (Members), $56.19+GST (Retail), 20 pages
Corrigendum: 1 1994
NZS/ISO-IEC 9281: (Withdrawn)

NZS/ISO 9282:- Information processing - Coded representation of pictures

Part 1:1988 Encoding principles for picture representation in a 7-bit or 8-bit environment
Specifies a standard coding system for the representation of pictures that can be generated by the majority of computer graphics
applications; based on a 7-bit structure, this coding scheme may be used in a 7-bit or 8-bit environment. Identical to AS 3644.1-1989
and ISO 9282.1:1988.
Adopted Standard
$185.97+GST (Members), $232.46+GST (Retail), 23 pages

NZS/ISO 9309:1989 (Withdrawn)

NZS/ISO-IEC 9314.3:1990 (Withdrawn)

NZS 9401:2008 Managing flood risk - A process Standard


Provides an agreed best practice approach for local and central government, professionals (planners, engineers, hydrologists,
scientists, risk managers, lawyers and so on), developers, utility suppliers, property owners, and communities to ensure that proper
consideration is given to all aspects of flood risk when making decisions, so that over the longer term, the risk of flood damage
decreases.
$89.95+GST (Members), $112.44+GST (Retail), 35 pages

NZS/ISO-IEC 9545:1989 (Withdrawn)

NZS/ISO-IEC TR 9575:1990 (Withdrawn)

NZS/ISO-IEC 9592: (Withdrawn)

NZS/ISO-IEC 9593: (Withdrawn)

NZS/ISO-IEC 9594: (Superseded by AS/NZS 4019.1-8:1996)

NZS/ISO-IEC 9595:1991 (Withdrawn)

NZS/ISO-IEC 9596.1-1991 (Withdrawn)

NZS/ISO 9735:1988 (Superseded by AS/NZS 3801)

AS/NZS ISO/IEC 9798 Information technology - Security techniques - Entity authentication

AS/NZS ISO/IEC 9798.2:2008 Mechanisms using symmetric encipherment algorithms


Provides the information security management community with detailed guidance on the background, techniques and procedures of
entity authentication using symmetric encipherment algorithms. Identical to ISO/IEC 9798-2:1999 including Corrigendum 1.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS ISO/IEC 9798.3:2008 Mechanisms using digital signature techniques


Provides the information Security management community with detailed guidance on the background, techniques and procedures of
entity authentication mechanisms using digital signature techniques. Identical to ISO/IEC 9798-3:1998.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
AS/NZS ISO/IEC 9798.4:2008 Mechanisms using a cryptographic check function
Provides the Information security management community with detailed guidance on the background, techniques and procedures of
entity authentication mechanisms using a cryptographic check function. Identical to ISO/IEC 9798-4:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS ISO/IEC 9798.6:2006 Mechanisms using manual data transfer


Provides information security practitioners with an entity authentication mechanism, referred to as a manual authentication
mechanism, where there is no assumption of pre-established keying relationships. Identical to and reproduced from ISO/IEC 9798-
6:2005.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

NZS/ISO-IEC 9899:1990 (Withdrawn)

NZS/ISO-IEC 9945: (Withdrawn)

NZS/ISO-IEC TR 10000: (Superseded by AS/NZS 3966)

AS/NZS ISO 10005:2006 Quality management systems - Guidelines for quality plans
Provides guidelines for the development, review, acceptance and revision of quality plans. It is focused primarily on product
realization, and is not a guide to organizational quality management system planning. Identical with, and has been reproduced from,
ISO 10005:2005.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

NZS 10011:- (Superseded by AS/NZS ISO 19011:2003)

AS/NZS ISO 10012:2004 Measurement management systems - Requirements for measurement processes and
measuring equipment
Specifies requirements for the management of measurement processes and metrological confirmation of measuring equipment used
to support and demonstrate compliance with metrological requirements. Identical to and reproduced from ISO 10012:2003.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 19 pages

NZS 10012.1:1993 (Superseded by AS/NZS ISO 10012:2004)

AS/NZS ISO 10013:1996 (Withdrawn)

NZS/ISO-IEC TR 10029:1989 (Withdrawn)

NZS/ISO-IEC 10206:1991 (Withdrawn)

AS/NZS ISO 10957:2004 Information and documentation - International standard music number (ISMN)
Specifies a means of uniquely identifying printed music publications. It standardizes and promotes internationally the use of numbers
on printed music publications in order that one edition of a title or one separate component of an edition can be distinguished from all
other editions or components by means of a unique ISMN. Identical and reproduced from ISO 10957:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS ISO 11137 Sterilization of health care products - Radiation


11137.1:2006 Requirements for development, validation and routine control of a sterilization process for
medical devices
Specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices.
Identical to ISO 11137-1:2006.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 48 pages

11137.2:2006 Establishing the sterilization dose


Specifies the methods of determining the minimum dose of radiation sterilization of medical devices. Identical to ISO 11137-2:2006.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 72 pages

11137.3:2006 Guidance on dosimetric aspects


Specifies the dosimetric procedures related to the development, validation and routine control of a radiation sterilization process.
Identical to ISO 11137-3:2006.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS ISO 11553:2004 Safety of machinery - Laser processing machines - Safety requirements
Describes hazards generated by laser processing machines, and specifies the safety requirement related to radiation hazards and
hazards generated by materials and substances. It also specifies the information to be supplied by manufacturers of such
equipment. Identical with and reproduced from ISO 11553:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 11572:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Circuit mode bearer services - Inter-exchange
signalling procedures and protocol
Specifies enhanced signalling procedures and protocol for the support of circuit-switched call control at the Q reference point
between private integrated services network exchanges connected together within a private integrated services network. The Q
reference is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 11572:1997 and its Amendments 1 and 2.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 120 pages

AS/NZS ISO/IEC 11770 Information technology - Security Techniques - Key management

AS/NZS ISO/IEC 11770.2:2008 Mechanisms using symmetric techniques


Provides the information security management community with detailed guidance on key establishment mechanisms using
symmetric cryptographic techniques. Identical to ISO/IEC 11770-2:1996, including Corrigendum 1:2005.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 24 pages

AS/NZS ISO/IEC 11770.3:2008 Mechanisms using asymmetric techniques


Provides the information security management community with detailed guidance on the background, techniques and procedures of
entity authentication. Identical to ISO/IEC 11770-3:1999.
Joint Australian/New Zealand Standard
$89.95+GST (Members), $112.44+GST (Retail), 44 pages

AS/NZS ISO/IEC 11770.4:2008 Mechanisms based on weak secrets


Provides the information security management community with detailed guidance on the background, techniques and procedures of
entity authentication. Identical to ISO/IEC 11770-4:2006.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

NZS/ISO 11784:2001 Radio-frequency identification of animals - Code structure


This New Zealand adoption (with modifications) of the ISO 11784 standard specifies the structure of the radio frequency
identification code emitted by the transponder carried by the animal. This code is split up into a number of code fields, one of which
is a country identifier and the other, a number allocated within that country to the animal.
Adopted Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages
NZS/ISO 11785:2001 Radio-frequency Identification of Animals - Technical concept
This New Zealand adoption (with modifications) of the ISO 11785 standard specifies the characteristics of the transmission protocols
used between the transponder carried by the animal and the receiver to convey the identification code defined in NZS ISO 11784.
Adopted Standard
$64.95+GST (Members), $81.19+GST (Retail), 21 pages

AS/NZS ISO 11798:2004 Information and documentation - Permanence and durability of writing, printing and
copying on paper - Requirements and test methods
Specifies requirements and test methods for evaluation of the permanence and durability of writing, printing and copying on paper
stored in libraries, archives and other protected environments for long periods of time. Identical with, and has been reproduced from
ISO 11798:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 11990:2002 Optics and optical instruments - Lasers and laser-related equipment - Determination of
laser resistance of tracheal tube shafts
Specifies a method of testing the laser resistance of the shaft of a tracheal tube.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 9 pages

AS/NZS ISO 12029:2007 Electronic imaging - Forms design optimization for electronic image management
Provides guidelines for the design of forms to be completed by users and scanned for processing by electronic image management
(EIM) systems. These guidelines are limited to forms using roman characters. Identical to ISO/TS 12029:2007.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

AS/NZS ISO/IEC 12207:1997 Information technology - Software life cycle processes


Specifies a common framework for software life cycle processes that can be referenced by the software industry. It includes
processes, activities and tasks to be applied during the acquisition of a system that contains software, a stand-alone software
product and software services. It is intended to be employed during the supply, development, operation and maintenance of software
products, including the software portion of firmware. This Standard is identical with and has been reproduced from ISO/IEC
12207:1995.
Reprinted to append Amendments 1 & 2
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 57 pages
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 1, 2004 $39.95+GST (Members), $49.94+GST (Retail)

AS/NZS ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function

13235.1:2006 Specification
Provides an organization with a Reference Model of Open Distributed Processing RM-ODP) framework. It defines an architecture
within which support of distribution, interoperability and portability can be integrated. The trading function provides the means to offer
a service and the means to discover services that have been offered. This Standard provides architecture for systems implementing
the trading function and the specification of interfaces within the architecture. Identical to and reproduced from ISO/IEC 13235-
1:1998.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 92 pages

13235.3:2006 Provision of Trading Function using OSI Director Service


Provides organizations with a specification which describes how the Open Distributed Processing (ODP) Trading Function can be
realised using information entries and support mechanisms of the Open Systems Interconnection (OSI) Directory. This Specification
is to be used in conjunction with the ODP Trading Function Standard (ITU-T Rec. X.950. ISO/IEC 13235-1). Identical to and
reproduced from ISO/IEC 13235-3:1998.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 60 pages
AS/NZS 13236:2000 Information technology - Quality of service: Framework
Provides a common basis for the coordinated development and enhancement of the wide range of Standards that specify or
reference quality of service requirements or mechanisms. This Standard is identical with and has been reproduced from ISO/IEC
13236:1998.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

AS/NZS 13241:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Route
restriction class additional network feature
Specifies the signalling protocol for the support of the route restriction class additional network feature at the Q reference point
between private integrated services network exchanges connected together within a private integrated services network. The Q
reference point is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated
services networking. This Standard is identical with and has been reproduced from ISO/IEC 13241:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS 13242:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Route restriction class additional network feature
Specifies the route restriction class additional network feature applicable to various basic services supported by private integrated
services networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable
to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13242:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 13246:1999 Information technology - Telecommunications and information exchange between systems
- Broadband private integrated services network - Inter-exchange signalling protocol -
Signalling ATM adaptation layer
Specifies the signalling asynchronous transfer mode adaptation layer protocol used in interface between broadband private
integrated services network exchanges and between broadband private integrated services networks. This Standard is one of a
series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced
from ISO/IEC 13246:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

AS/NZS 13247:1999 Information technology - Telecommunications and information exchange between systems
- Broadband private integrated services network - Inter-exchange signalling protocol -
Basic call/connection control
Specifies the signalling protocol for basic call/connection control at the Q reference point between private integrated services
network exchanges connected together within a broadband private integrated services network using asynchronous transfer mode.
This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and
has been reproduced from ISO/IEC 13247:1997.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 143 pages

AS/NZS 13594:1998 Information technology - Lower layers security


Specifies the cross layer aspects of the provision of security services in the lower layers of the OSI reference model (transport,
network, datalink and physical layers). This Standard is identical with and has been reproduced from ISO/IEC TR 13594:1995.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment - Test methods for
laser beam power (energy) density distribution
Specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the
characterization of the spatial properties of laser power (energy) density distribution function at a given plane. Identical with and
reproduced from ISO 13694:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages
AS/NZS 13818:- Information technology - Generic coding of moving pictures and associated audio
information

13818.1:2002 Systems
Specifies the systems layer of the coding. It was developed principally to support the combination of the video and audio coding
methods defined in Parts 2 and 3 of ISO/IEC 13818. This Standard is identical with and has been reproduced from ISO/IEC 13818-
1:2000 and ISO/IEC 13818-1:2000/Corrigendum 1:2002.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 156 pages

13818.2:2002 Video
Specifies the coded representation of picture information for digital storage media and digital video communication and specifies the
decoding process. This Standard is identical with and has been reproduced from ISO/IEC 13818-2:2000, ISO/IEC 13818-
2:2000/Amdt.1:2001 and ISO/IEC 13818-2:2000/Corrigendum 1:2002.
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 230 pages

13818.3:1999 Audio
Specifies the coded representation of multichannel and multilingual high quality audio for broadcasting, transmission and storage
media and the method for decoding of multichannel and multilingual high quality audio signals. This Standard is identical with and
has been reproduced from ISO/IEC 13818-3:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 115 pages

13818.4:2002 Conformance testing


Specifies how tests can be designed to verify whether bitstreams and decoders meet requirements specified in Parts 1,2 and 3 of
ISO/IEC 13818. This Standard is identical with and has been reproduced from ISO/IEC 13818-4:1998, ISO/IEC 13818-
4:1998/Amdt.1:1999, ISO/IEC 13818-4:1998/Amdt.2:2000, ISO/IEC 13818-4:1998/Amdt.3:2000 and ISO/IEC 13818-
4:1998/Corr.2:1998.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 94 pages

13818.5:1999 Software simulation


Provides C language software simulation of an encoder and decoder for Parts 1, Part 2 and Part 3 of AS/NZS 13818:1997. This
Standard is identical with and has been reproduced from ISO/IEC TR 13818-5:1997.
Reprinted to append Amendment 1:2002
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 313 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

13818.6:1999 Extensions for digital storage media command and control


Specifies the digital storage media command and control (DSM-CC) of a digital bit stream complying with the protocol specified by
other Parts in this series of Standards, i.e. extending the capabilities of the original protocol. The specification consists of concepts
and protocols which provide the general capability to browse, select, download and control a variety of bit streams. This Standard is
identical with and has been reproduced from ISO/IEC 13818-6:1998.
Reprinted to append Amendment 1:2002
Joint Australian/New Zealand Standard
$309.95+GST (Members), $387.44+GST (Retail), 542 pages
Amendment 1, 2002 $29.95+GST (Members), $37.44+GST (Retail)

13818.7:1999 Advanced audio coding


Provides a specification for an audio standard for five full-bandwidth channel audio signals at data rates of 320 kb/s. This
specification is not backward compatible with the specification in AS/NZS 13818.3 (MPEG-2). This Standard is identical with and has
been reproduced from ISO/IEC 13818-7 and ISO/IEC 13818-7/Corrigendum 1:1998.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 167 pages

13818.9:1999 Extension for real time interface for systems decoders


Specifies a real time interface for systems decoders based on the requirements of AS/NZS 13818.1. This Standard is identical with
and has been reproduced from ISO/IEC 13818.9:1996.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
13818.10:2002 Conformance extensions for Digital Storage Media Command and Control (DSM-CC)
Defines compliance to Data Storage Media Command and Control (DSMCC)Standard in 2 steps: the static review and the dynamic
review as defined in ISO/IEC 9646 Conformance Testing Standard (1, 2, 3). This Standard is identical with and has been
reproduced from ISO/IEC 13818-10:1999.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 140 pages

AS/NZS ISO 13994:2006 Clothing for protection against chemicals - Determination of the resistance of protective
clothing materials to penetration by liquids under pressure
Describes a laboratory test method for the measurements of penetration resistance of protective clothing materials from liquids under
pressure. Identical to and reproduced from ISO 13994:2005.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS ISO 14001:2004 Environmental management systems - Requirements with guidance for use
Specifies requirements for an environmental management system (EMS) to enable an organization to develop and implement a
policy and objectives which take into account legal requirements and other requirements to which the organization subscribes, and
information about significant environmental aspects. It applies to those environmental aspects that the organization identifies as
those which it can control and those which it can influence. It does not itself state specific environmental performance criteria.
Identical with, and has been reproduced from, ISO 14001:2004.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

AS/NZS ISO 14004:2004 Environmental management systems - General guidelines on principles, systems and
support techniques
Provides guidance on the establishment, implementation, maintenance and improvement of an environmental management system
(EMS) and its coordination with other management systems. Identical with, and has been reproduced from, ISO 14004:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 52 pages

AS/NZS ISO 14010:1996 (Superseded by AS/NZS ISO 19011:2003)

AS/NZS ISO 14011:1996 (Superseded by AS/NZS ISO 19011:2003)

AS/NZS ISO 14012:1996 (Superseded by AS/NZS ISO 19011:2003)

AS/NZS ISO 14015:2003 Environmental management - Environmental assessment of sites and organizations
(EASO)
Provides guidance on how to conduct an EASO through a systematic process of identifying environmental aspects and
environmental issues, and determining any business consequences. This Standard is identical with and reproduced from ISO
14015:2001.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 19 pages

AS/NZS ISO 14021:2000 Environmental labels and declarations - Self-declared environmental claims (Type II
environmental labelling)
Specifies requirements applying to the development of environmental claims, expressed in either words or symbols, about products
and services. Includes both general requirements and specific details for selected claims, along with verification methodologies. This
Standard is an adoption with national modifications of ISO 14021:1999.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 23 pages

AS/NZS ISO 14031:2000 Environmental management - Environmental performance evaluation - Guidelines


Provides guidance on the use of environmental performance evaluation (EPE) as an internal management process designed to
produce reliable and verifiable information on an ongoing basis to determine whether an organization's environmental performance is
meeting criteria set by management.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages

AS/NZS ISO 14040:1998 Environmental management - Life cycle assessment - Principles and framework
Specifies the general framework, principles and requirements for conducting and reporting life cycle assessment studies. This
standard is identical with and reproduced from ISO 14040:1997.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 12 pages

AS/NZS ISO 14041:1999 Environmental management - Life cycle assessment - Goal and scope definition and
inventory analysis
Specifies the requirements and the procedures necessary for the compilation and preparation of the definition of goal and scope for
a life cycle assessment (LCA), and for performing, interpreting and reporting a life cycle inventory analysis (LCI). This Standard is
identical with and has been reproduced from ISO 14041:1998.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 21 pages

AS/NZS ISO 14042:2001 Environmental management - Life cycle assessment - Life cycle impact assessment
Describes and gives guidance on a general framework for the life cycle impact assessment (LCIA) phase of life cycle assessment
(LCA), and the key features and inherent limitations of LCIA. Specifies requirements for conducting the LCIA phase and relationship
of LCIA to other LCA phases. This Standard is identical with and has been reproduced from ISO 14042:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 16 pages

AS/NZS ISO 14043:2001 Environmental management - Life cycle assessment - Life cycle interpretation
Provides requirements and recommendations for conducting the life cycle interpretations in life cycle assessment (LCA) or life cycle
inventory analysis (LCI) studies. This Standard is identical with and has been reproduced from ISO 14043:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 18 pages

AS/NZS 14102:1998 Information technology - Guideline for evaluation and selection of CASE tools
Specifies the processes and activities to be applied to the evaluation of CASE tools and selecting the most appropriate CASE tools
from several candidates. This Standard is identical with, and has been reproduced from, ISO/IEC 14102:1995.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 55 pages

AS/NZS 14143:- Information technology - Software measurement - Functional size measurement

AS/NZS 14143.1:1999 Definition of concepts


Defines the fundamental concepts of functional size measurement (FSM), thereby promoting the consistent interpretation of FSM
principles which are already in existence. This Standard is identical with and has been reproduced from ISO/IEC 14143-1:1998.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

AS/NZS 14143.2:2003 Conformity evaluation of software size measurement methods to AS/NZS 14143.1:1999
Establishes a framework for the conformity evaluation of a Candidate Functional Size Measurement Method against the provisions of
AS/NZS 14143.1:1999; and describes a process for conformity evaluation of whether a Candidate Functional Size Measurement
Method meets the (type) requirements of AS/NZS 14143.1:1999 such that it is an actual Functional Size Measurement Method.
Additionally, it describes the requirements for performing a conformity evaluation in order to ensure repeatability of the conformity
evaluation process, as well as consistency of decisions on conformity and the final result; and aims to sure that the output from the
conformity evaluation process is objective, impartial, consistent, repeatable, complete and auditable. Identical with and reproduced
from ISO/IEC 14143-2:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 95 pages

AS/NZS ISO/IEC 14143.3:2004 Verification of functional size measurement methods


Specifies a framework for verifying the statements of an FSM Method and/or for conducting tests requested by the verification
sponsor. Identical with, and has been reproduced from ISO/IEC TR 14143-3:2003.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS 14143.4:2003 Reference model


Specifies a quantitative method for measuring process efficiency and effectiveness, and for managing software costs, for the
systems organizations to acquire, develop, enhance or maintain. Defines a reference model for verifying a Functional Size
Measurement method. This standard is identical to and reproduced from ISO/IEC TR 14143-4:2002.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 95 pages

AS/NZS ISO/IEC 14143.5:2004 Determination of functional domains for use with functional size measurement
Describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements
(FUR) can be used to determine Functional Domains. Identical with, and has been reproduced from ISO/IEC TR 14143.5:2004.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS ISO/IEC 14143.6:2006 Guide for use of ISO/IEC 14143 series and related International Standards
Provides Functional Size Method users with a guide as to how the 14143 series Standards and other functional size measurement
Standards and Technical Reports relate to each other and how to use them. Identical to and reproduced from ISO/IEC 14143-
6:2006.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

AS/NZS ISO 14343:2006 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and
heat-resisting steels - Classification
Specifies requirements for classification of wire electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc
welding, plasma arc welding, submerged arc welding and laser beam welding of stainless and heat-resisting steels. Identical to, and
reproduced from, ISO 14343:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS ISO 14344:2005 Welding and allied processes - Flux and gas shielded electrical welding processes -
Procurement guidelines for consumables
Provides a method for preparing those specific details needed for the procurement of welding consumables.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

AS/NZS 14475:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Architecture and scenarios for private integrated
services networking
Specifies inter-private exchange connections provided by intervening networks. It is one of a series of Standards applicable to
private integrated services networking. This Standard is identical with and has been reproduced from ISO/IECTR14475:1996.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

AS/NZS 14478:- Information technology - Computer graphics and image processing - Presentation
environment for multimedia objects

14478.1:2000 Fundamentals of presentation environment for multimedia objects


Describes the overall architecture and specifies the common semantics for the construction of, presentation of, and interaction with
multimedia objects such as still and moving computer graphics, synthetic graphics, audio, and still and moving images. This
Standard is identical with and has been reproduced from ISO/IEC 14478-1:1998.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 36 pages

14478.2:2000 Foundation component


Specifies an initial set of lists of object and non-object types (conforming with AS/NZS 14478.1) useful for the construction of,
presentation of, and interaction with multimedia information. This Standard is identical with and has been reproduced from ISO/IEC
14478-2:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 71 pages
14478.3:2000 Multimedia systems services
Specifies a set of system software components which marshal lower-level system resources to the task of supporting multimedia
processing, so providing a set of common services which can be used by multimedia application developers. This Standard is
identical with and has been reproduced from ISO/IEC 14478-3:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 74 pages

14478.4:2000 Modelling, rendering and interaction component


Specifies the objects needed for advanced computer systems using graphics, video, audio, or other types of presentable media
enhanced by time aspects. This Standard is identical with and has been reproduced from ISO/IEC 14478-4:1998.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 71 pages

AS/NZS 14496, Parts 1 to 6:2002 Information technology - Coding of audio-visual objects


A set of six CD-ROMs covering Parts 1 to 6 of AS/NZS 14496, not sold individually. Part 1 is identical to and reproduced from
ISO/IEC 14496-1:2001; Part 2 is identical to and reproduced from ISO/IEC 14496-2:2001; Part 3 is identical to and reproduced from
ISO/IEC 14496-3:2001; Part 5 is identical to and reproduced from ISO/IEC 14496-5:2000; Part 6 is identical to and reproduced from
ISO/IEC 14496-6:2000.
Joint Australian/New Zealand Standard
$1,775.14+GST (Members), $2,218.92+GST (Retail)

AS/NZS 14598:- Information technology - Software product evaluation

14598.1:2000 General overview


Specifies the framework for evaluating the quality of software product and gives the requirements for methods of software product
measurement and evaluation. This Standard is identical with and has been reproduced from ISO/IEC 14598-1:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

14598.2:2000 Planning and management


Specifies the requirements, recommendations and guidelines for a supporting function within an organization which is responsible for
the management of software product evaluation and for technologies necessary for software product evaluation. This Standard is
identical with and reproduced from ISO/IEC 14598-2:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 12 pages

14598.3:2000 Process for developers


Specifies the guidelines for clarifying quality requirements and for implementing and analysing software quality measures during all
phases of the development life cycle. This Standard is identical with ISO/IEC 14598-3:1999.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

14598.4:2000 Process for acquirers


Specifies the requirements and recommendations for the systematic measurement, assessment and evaluation of software product
quality. This Standard is identical with and reproduced from ISO/IEC 14598-4:1999.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 34 pages

14598.5:2000 Process for evaluators


Specifies requirements and recommendations for the practical implementation of software product evaluation when several parties
need to understand, accept and trust evaluation results. This Standard is identical with and has been reproduced from ISO/IEC
14598.5:1998.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 35 pages

14598.6:2001 Documentation of evaluation modules


Specifies the structure and content of the documentation to be used to describe an evaluation module for use by other parts of this
Standard. This Standard is identical with and reproduced from ISO/IEC 14598-6:2001.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages

AS/NZS ISO 14644 Cleanrooms and associated controlled environments


14644.1:2002 Classification and air cleanliness
Covers the classification of air cleanliness of cleanrooms and associated controlled environments exclusively in terms of
concentrations of airborne particles.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

14644.2:2002 Specifications for testing and monitoring to prove continued compliance with ISO 14644.1
Specifies requirements for periodic testing of a cleanroom or cleanzone to prove its continued compliance with ISO 14644.1 for the
designation classification of airborne particulate cleanliness.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

AS/NZS 14644.3:2009 Test methods


Specifies test methods for designated classification of airborne particulate cleanliness and for characterising the performance of
cleanrooms and clean zones. Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional
flow and those with non-unidirectional flow, in three possible occupancy states: as-built, at-rest and operational. The test methods
recommend test apparatus and test procedures for determining performance parameters. Where the test method is affected by the
type of cleanroom or clean zone, alternative procedures are suggested. For some of the tests, several different methods and
apparatus are recommended to accommodate different end-use considerations. Alternative methods not included in this part may be
used if based on agreement between customer and supplier. Alternative methods do not necessarily provide equivalent
measurements. Adopted with modifications from ISO 14644.3:2005.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 80 pages

14644.4:2002 Design, construction and start-up


Specifies requirements to provide control of airborne particulate contamination of levels appropriate for accomplishing contamination-
sensitive actives. This Standard is identical with, and has been reproduced from, ISO 14644-4:2001.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 51 pages

14644.5:2006 Operations
Specifies basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. Identical to
and reproduced from ISO 14644-5:2004.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 53 pages

14644.7:2006 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
Adopts ISO 14644-7:2004 to specify the minimum requirements for the design, construction, installation, test and approval of
separative devices. Identical to and reproduced from ISO 14644-7:2004.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 60 pages

AS/NZS ISO/IEC 14750:2003 Information technology - Open distributed processing - Interface definition language
Provides the ODP Reference Model with a language and environment neutral notation to describe computational operation interface
signatures. Use of this notation does not imply use of specific supporting mechanisms and protocols. Identical with and reproduced
from ISO/IEC 14750:1999.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 31 pages

AS/NZS ISO/IEC 14752:2003 Information technology - Open distributed processing - Protocol support for computational
interactions
Based on the framework of abstractions and concepts developed in the Reference Model for Open Distributed Processing. It defines
how interactions between computational objects in a computational specification of a system relate to protocol support for those
interactions in an engineering specification of that system. Identical with and reproduced from ISO/IEC 14752:2000.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 29 pages

AS/NZS ISO/IEC 14753:2003 Information technology - Open distributed processing - Interface references and binding
Provides interface references that embody the information needed to establish bindings, including binding to objects at nodes that
support several different communication protocols and binding to objects in different management domains. It further embodies the
information required for the engineering mechanism to maintain bindings between computational objects in the presence of
distribution transparencies such as migration transparency. Identical with and reproduced from ISO/IEC 14753:1999.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages

AS/NZS 14756:2001 Information technology - Measurement and rating of performance of computer-based


software systems
Specifies and defines the user oriented performance values for computer-based software systems. These values are applicable to
tests for all time constrained systems or system parts and include execution time, throughput and timeliness. This Standard is
identical with and has been reproduced from ISO/IEC 14756:1999.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 49 pages

AS/NZS ISO/IEC 14763 Telecommunications installations - Implementation and operation of customer premises
cabling

14763.3:2007 Acceptance testing for optical fibre cabling


Provides users with specifications of systems and methods for the inspection and testing of optical fibre cabling designed in
accordance with ISO/IEC 11801 or equivalent standards. The test methods refer to existing standards-based procedures where they
exist. Identical to ISO/IEC 14763.3:2006.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 68 pages

AS/NZS 14764:2001 Information technology - Software maintenance


Specifies guidance that applies to planning, execution, control, review, evaluation and closure of the maintenance process and the
development of maintenance plans which apply to software products. This Standard is identical with and has been reproduced from
ISO/IEC 14764:1999.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 38 pages

AS/NZS ISO/IEC 14769:2003 Information technology - Open distributed processing - Type repository function
Defines a framework for describing types of interest in ODP systems by determining what entities need to be typed and what needs
to be said about the identified types. It provides a standard method of accessing type descriptions used within open distributed
processing systems, where the type descriptions can be in various concrete syntaxes and type languages used in these open
distributed processing systems. It also facilitates the dynamic matching of types for interactions, binding and trading purposes.
Identical with and reproduced from ISO/IEC 14769:2001.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS ISO/IEC 14771:2003 Information technology - Open distributed processing - Naming framework
Provides a general framework for the naming of entities of interest in ODP systems, which includes naming in the infrastructure of an
ODP system, naming in the applications built on the infrastructure, and naming in the enterprise the system serves. Identical with
and reproduced from ISO/IEC 14771:1999.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 29 pages

AS/NZS 14841:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call offer supplementary service
Specifies the call offer features applicable to various basic services supported by private integrated services networks. The basic
services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking.
This Standard is identical with and has been reproduced from ISO/IEC 14841:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 14842:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Do not disturb and do not disturb override supplementary services
Specifies the do not disturb and do not disturb override features applicable to various basic services supported by private integrated
services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14842:1996.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 70 pages

AS/NZS 14843:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call offer
supplementary service
Specifies the signalling protocol for the support of the call offer supplementary service at the Q reference point between private
integrated services network exchanges connected together within a private integrated services network. The Q reference point is
defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard
is identical with and has been reproduced from ISO/IEC 14843:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 35 pages

AS/NZS 14844:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Do not disturb
and do not disturb override supplementary services
Specifies the signalling protocol for the support of do not disturb and do not disturb override supplementary services at the Q
reference point between private integrated service network exchanges connected together within a private integrated services
network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated
services networking. This Standard is identical with and has been reproduced from ISO/IEC 14844:1996.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages

AS/NZS 14845:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call intrusion supplementary service
Specifies the call intrusion features applicable to various basic services supported by private integrated services networks. The basic
services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking.
This Standard is identical with and has been reproduced from ISO/IEC 14845:1996.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 73 pages

AS/NZS 14846:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call intrusion
supplementary service
Specifies the signalling protocol for the support of the call intrusion supplementary services at the Q reference point between private
integrated services network exchanges connected together within a private integrated services network. The Q reference is defined
in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is
identical with and has been reproduced from ISO/IEC 14846:1996.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 61 pages

AS/NZS 14882:1999 Programming languages - C++


Provides the requirements for the implementations of the C++ programming language. This language is based on the C
programming language and provides additional data types, classes, templates, exceptions, namespaces, inline functions, operator
and function name overloading references, free store management operators and additional library facilities. This Standard is
identical with and reproduced with ISO 14882:1998.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 748 pages

AS/NZS ISO 15004:2002 Ophthalmic instruments - Fundamental requirement and test methods
Specifies requirements for non-invasive, active and non-active ophthalmic instruments.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages
AS/NZS ISO/IEC 15018:2005 Information technology - Generic cabling for homes
To provide home owners, architects, designers, manufacturers, installers, maintainers and users with requirements to ensure
compatibility with equipment and services and to ensure performance of infrastructure to meet present and foreseeable future
requirements.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 90 pages

AS/NZS 15026:1999 Information technology - System and software integrity levels


Specifies requirements for the determination of system and software integrity levels for software products and systems that use
software. The Standard also defines the concepts associated with integrity levels, defines the processes for determining integrity
levels and software integrity requirements, and places requirements on each process. This Standard is identical with and has been
reproduced from ISO/IEC 15026:1998.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

AS/NZS 15049:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Advice of charge supplementary services
Specifies the advice of charge features applicable to various basic services supported by private integrated services networks. The
basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 15049:1997.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 67 pages

AS/NZS 15050:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Advice of
charge supplementary services
Specifies the signalling protocol for the support of the advice of charge supplementary services at the Q reference point between
private integrated services network exchanges connected together within a private integrated services network. The Q reference is
defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard
is identical with and has been reproduced from ISO/IEC 15050:1997.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 50 pages

AS/NZS 15051:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification functional model and information
flows - Recall supplementary service
Specifies the recall feature applicable to various basic services supported by private integrated services networks. The basic
services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking.
This Standard is identical with and has been reproduced from ISO/IEC 15051:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

AS/NZS 15052:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Recall
supplementary service
Specifies the signalling protocol for the support of the recall supplementary service at the Q reference point between private
integrated services network exchanges connected together within a private integrated services network. The Q reference point is
defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard
is identical with and has been reproduced from ISO/IEC 15052:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

AS/NZS 15053:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Call interception additional network feature
Specifies the call interception additional network feature applicable to various basic services networks. The basic services are
specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard
is identical with and has been reproduced from ISO/IEC 15053:1997.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 15054:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Call interception
additional network feature
Specifies the signalling protocol for the support of the call interception additional network feature at the Q reference point between
private integrated services network exchanges connected together within a private integrated services network. The Q reference
point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This
Standard is identical with and has been reproduced from ISO/IEC 15054:1997.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 39 pages

AS/NZS 15055:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Transit counter additional network feature
Specifies the transit counter additional network feature applicable to various basic services supported by private integrated services
networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15055:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 15056:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Transit counter
additional network feature
Specifies the signalling protocol for the support of the transit counter additional network feature at the Q reference point between
private integrated services network exchanges connected together within a private integrated services network. The Q reference
point is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 15056:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 11 pages

AS/NZS ISO 15161:2003 Guidelines on the application of ISO 9001:2000 for the food and drink industry
Specifies guidance to organizations in applying the requirements of ISO 9001 during the development and implementation of a
quality management system in the food and drink industry. This Standard is identical to and has been reproduced from ISO
15161:2001.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 35 pages

NZS/ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence
Provides requirements for competence and quality that are particular to medical laboratories. Medical laboratory services include
arrangements for requisition, patient preparation, patient identification, collection of samples, transportation, storage, processing and
examination of clinical samples, together with subsequent validation, interpretation, reporting and advice, in addition to the
considerations of safety and ethics in medical laboratory work. Bodies engaged in the recognition of the competence of medical
laboratories will also be able to use this Standard as the basis for their activities. Demonstrated conformity to this Standard does not
imply conformity of the quality management system within which the laboratory operates to all the requirements of ISO 9001. This
International Standard is not intended to be used for the purposes of certification. Identical to and adopted from ISO 15189:2007.
Adopted Standard
$149.95+GST (Members), $187.44+GST (Retail), 48 pages

AS/NZS 15271:1999 Guide for AS/NZS ISO/IEC 12207 (Software life cycle processes)
Provides users of AS/NZS ISO/IEC 12207 with further explanation in relation to various types of software and indicates which
processes may be relevant in reference to contractual situations, on a project irrespective of size or complexity, in an organization as
a self-assessment or for software process improvement initiatives. This Standard is identical with and has been reproduced from
ISO/IEC TR 15271:1998.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 49 pages
AS/NZS 15288:2003 Systems engineering - System life cycle processes
Provides a common process framework covering the life cycle of man-made systems. This life cycle spans the conception of ideas
through to the retirement of a system. It provides the processes for acquiring and supplying systems. In addition, this framework
provides for the assessment and improvement of the life cycle processes. This Standard is identical to and reproduced from
ISO/IEC 15288:2002.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 62 pages

AS/NZS ISO/IEC 15289:2007 Systems and software engineering - Content of systems and software life cycle process
information products (Documentation)
Outlines a set of processes for managing and performing the stages for systems life cycle, (in conformance with AS/NZS 15288 and
AS/NZS ISO/IEC 12207). Identical to ISO/IEC 15289:2006.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 64 pages

AS/NZS ISO/IEC 15414:2003 Information technology - Open distributed processing - Reference model - Enterprise
language
Provides a language (the enterprise language) comprising concepts, structures and rules for developing, representing, and
reasoning about a specification of an ODP system from the enterprise viewpoint. It also provides rules which establish
correspondences between the enterprise language and the other viewpoint languages to ensure the overall consistency of a
specification. Identical with and reproduced from ISO/IEC 15414:2002.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 20 pages

AS/NZS ISO/IEC 15437:2003 Information technology - Open distributed processing - Enhancements to LOTOS (E-
LOTOS)
Defines the syntax and semantics of the enhanced LOTOS language, named E-LOTOS. E-LOTOS is used for the formal description
of the behavioural aspects of distributed and concurrent systems in general and in the area of open distributed processing in
particular. Identical with and reproduced from ISO/IEC 15437:2001.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 187 pages

AS/NZS ISO/IEC 15443 Information technology - Security techniques - A framework for IT security assurance

15443.1:2006 Overview and framework


Presents a variety of assurance methods, and guides the IT Security Professional in the selection of an appropriate assurance
method (or combination of methods) to achieve confidence that a given deliverable satisfies its stated IT security assurance
requirements. Identical to and reproduced from ISO/IEC TR 15443-1:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 32 pages

AS/NZS ISO/IEC 15474:- Information technology - CDIF framework

15474.1:2003 Overview
Introduces the CDIF family of standards and defines the terms common to the CDIF family of standards. Identical with and
reproduced from ISO/IEC 15474-1:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

15474.2:2003 Modelling and extensibility


Includes the definition of the CDIF meta-metamodel and describes the rules and notations used throughout the CDIF family of
standards. The rules for extending the CDIF semantic metamodel are also defined. Identical with and reproduced from ISO/IEC
15474-2:2002.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 46 pages

AS/NZS ISO/IEC 15475:- Information technology - CDIF transfer format

15475.1:2003 General rules for syntaxes and encodings


Describes the way that CDIF metamodels are concretely represented during a transfer and the way that CDIF supports multiple
exchange syntaxes and encodings. Identical with and reproduced from ISO/IEC 15475-1:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

15475.2:2003 Syntax SYNTAX.1


Describes the standard CDIF transfer syntax. Identical with and reproduced from ISO/IEC 15475-2:2002.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 29 pages

15475.3:2003 Encoding ENCODING.1


Describes the standard CDIF transfer encoding for the standard CDIF transfer syntax. Identical with and reproduced from ISO/IEC
15475-3:2002.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 20 pages

AS/NZS ISO/IEC 15476:- Information technology - CDIF semantic metamodel

15476.1:2003 Foundation
Defines the Foundation subject area of the CDIF semantic metamodel. This subject area contains the basic objects on which all
other objects, including those defined using extensibility, must be based. Identical with and reproduced from ISO/IEC 15476.1:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 11 pages

15476.2:2003 Common
Defines the Common Subject Area of the CDIF semantic metamodel. This subject area contains meta-objects that are used as the
basis of the other subject area standards, and also meta-relationships and meta-attributes that are applicable to all meta-objects.
Identical with and reproduced from ISO/IEC 15476.2:2002.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 41 pages

15476.3:2006 Data definitions


Provides a definition of Data Definition Subject Area of the CDIF semantic metamodel. (This subject area contains meta-objects that
are used as a basis of the data components of other subject area standards, and also meta-relationships and meta-attributes that
are applicable to all data-related meta-objects). Identical to and reproduced from ISO/IEC 15476-3:2006.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 100 pages

15476.4:2007 Data models


Provides modelling tools and meta tape repositories with definition of the portion of the CDIF semantic metamodel that supports
general tape modelling. Identical to ISO/IEC 15476-4:2005.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 128 pages

15476.6:2007 State/event models


Provides modelling tools and meta-data repositories with a definition of the State/Event Subject Area of the CDIF semantic
metamodel. Identical to ISO/IEC 15476-6:2006.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

AS/NZS ISO/IEC 15504:- Information technology - Process assessment

15504.1:2005 Concepts and vocabulary


Provides overall information on the concepts of process assessment and its use in the two contexts of process improvement and
process capability determination. Identical to and reproduced from ISO/IEC 15504-1:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

15504.2:2004 Performing an assessment


Specifies the assessment of process and the application of process assessment for improvement and capability determination. It
defines the minimum set of requirements for performing an assessment that will ensure assessment results are objective, impartial,
consistent, repeatable and representative of the assessed processes. Identical to and reproduced from ISO/IEC 15504-2:2003.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 16 pages

15504.3:2004 Guidance on performing an assessment


The objective of this Standard is to provide guidance on meeting the minimum set of requirements for performing an assessment
contained in AS/NZS ISO/IEC 15504.2. Identical to and reproduced from ISO/IEC 15504-3:2004.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 54 pages

15504.4:2005 Guidance on use for process improvement and process capability determination
Identical to ISO/IEC 15504-4:2004 which provides guidance on how to utilize a conformant process assessment within a process
improvement programme or a process capability determination. Identical to and reproduced from ISO/IEC 15504.4:2004.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

15504.5:2006 An exemplar Process Assessment Model


Provides an example of a Process Assessment Model for use in performing a conformant assessment with the requirements of
ISO/IEC 15504-2. Identical to and reproduced from ISO/IEC 15504-5:2006.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 172 pages

AS/NZS 15505:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Message waiting indication supplementary service
Specifies the message waiting indication features applicable to various basic services supported by private integrated services
networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15505:1997.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

AS/NZS 15506:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - Message
waiting indication supplementary service
Specifies the signalling protocol for the support of the message waiting indication supplementary service at the Q reference point
between private integrated services network exchanges connected together within a private integrated services network. The Q
reference is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 15506:1997.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 26 pages

AS/NZS 15507:1999 Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Inter-exchange signalling protocol - PINX clock
synchronization
Specifies the signalling protocol for the support of the clock synchronization between private integrated service network exchanges
connected together within a private integrated services network. This Standard is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15507:1997.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

AS/NZS ISO 15511:2004 Information and documentation - International Standard Identifier for Libraries and Related
Organizations (ISIL)
Defines and promotes the use of a set of standard identifiers for the unique identification of libraries and related organizations with a
minimum impact on already existing systems. Identical with, and has been reproduced from ISO 15511:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS ISO 15706:2004 Information and documentation - International Standard Audiovisual Number (ISAN)
Defines a voluntary standard numbering system for the unique and international identification of audiovisual works. Identical to and
reproduced from ISO 15706:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
AS/NZS ISO 15707:2004 Information and documentation - International Standard Music Work Code (ISWC)
Specifies a means of uniquely identifying a musical work. It standardizes and promotes internationally the use of a standard
identification code so that musical works can be uniquely distinguished from one another within computer databases and related
documentation and for the purposes of collecting societies involved in the administration of rights to such works. Identical to and
reproduced from ISO 15707:2001.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS ISO 15836:2004 Information and documentation - The Dublin Core metadata element set
Provides a wide variety of information providers in the arts, sciences, education, business and government sectors with guidelines
for cross domain information resource description. Identical to and reproduced from ISO 15836:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 15909 Software and system engineering - High-level Petri nets

15909.1:2006 Concepts, definitions and graphical notation


Specifies and defines a Petri net technique, including its syntax and semantics. It provides a reference definition that can be used
both within and between organisations, to ensure a common understanding of the techniques and of the specifications written using
the technique. Identical to and reproduced from ISO/IEC 15909-1:2004.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages

AS/NZS ISO/IEC 15910:2004 Information technology - Software user documentation process


Specifies the minimum process for creating all forms of user documentation for software which has a user interface. Identical to and
reproduced from ISO/IEC 15910:1999.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

AS/NZS 15938:- Information technology - Multimedia content description interface

15938.1:2003 Systems
Specifies a series of interfaces from system to application level to allow disparate systems to interchange information about
multimedia content. Identical with and reproduced from ISO/IEC 15938-1:2002.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 85 pages

15938.2:2003 Description definition language


Specifies the language for defining the standard set of description tools (DSs, Ds, and datatypes) and for defining new description
tools. Identical with and reproduced from ISO/IEC 15938-2:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 37 pages

15938.3:2003 Visual
Specifies tools for description of visual content; including still images, video and 3D models. Identical with and reproduced from
ISO/IEC 15938-3:2002.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 175 pages

15938.4:2003 Audio
Specifies description tools that pertain to multimedia in the audio domain. Identical with and reproduced from ISO/IEC 15938-
4:2002.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 106 pages

AS/NZS 15939:2003 Software engineering - Software measurement process


Defines a software measurement process applicable to all software-related engineering and management disciplines. This standard
is identical to and reproduced from ISO/IEC 15939:2002.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 37 pages

AS/NZS ISO/IEC 16085:2007 Information technology - Systems and software engineering - Life cycle processes - Risk
management
Provides software users (technical and managerial personnel) with a process for the management of risk during software acquisition,
supply, development, operations, and maintenance. Identical to ISO/IEC 16085:2006.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

AS/NZS ISO/IEC 16326:2006 Software engineering - Guide for the application of ISO/IEC 12207 to project management
Provides Project Managers with guidance that supplements AS/NZS ISO/IEC 12207, Information technology - Software life cycle
processes, in the area of Management Process. Identical to and reproduced from ISO/IEC TR 16326:1999.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 100 pages

AS/NZS ISO/IEC 17020:2000 General criteria for the operation of various types of bodies performing inspection
Provides general requirements for the operation of bodies that perform inspections, and criteria for independence. It does not cover
testing laboratories, certification bodies or suppliers' declarations of conformity. Identical with and reproduced from ISO/IEC
17020:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

NZS ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
Specifies the general requirements for the competence to carry out tests and/or calibrations including sampling. Applicable for use
by all laboratories in developing their management system for quality, administrative and technical operations. Identical to and
reproduced from ISO/IEC 17025:2005.
$119.95+GST (Members), $149.94+GST (Retail), 28 pages

AS/NZS ISO 17632:2006 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded
metal arc welding of non-alloy and fine grain steels - Classification
Provides requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and
fine grain steels. Adopted from ISO 17632:2004 with national modifications.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 44 pages

AS/NZS ISO 17633:2006 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification
Specifies a classification system for tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical
composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as
welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
Reproduced from ISO17633:2004 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS ISO 17634:2006 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of
creep-resisting steels - Classification
Provides requirements for classification of tubular cored electrodes with gas shield for metal arc welding of creep-resisting steels.
Adopted from ISO 17634:2004 with national modifications.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 36 pages

AS/NZS ISO/IEC 17799:2006 (Renumbered to become AS/NZS ISO/IEC 27002:2006 by Amendment 1:2008 to AS/NZS
ISO/IEC 17799:2006, which is incorporated in the renumbered Standard.)
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS ISO 17933:2004 Generic electronic document interchange
Specifies a format for exchange of electronic document copies between computer systems. The format includes a definition of a
GEDI header containing information about the request, supplier and format of the document and relevant bibliographic information.
Identical to and reproduced from ISO 17933:2000.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 52 pages

AS/NZS ISO/IEC 18019:2007 Software and system engineering - Guidelines for the design and preparation of user
documentation for application software
Provides guidelines for the design and preparation of user documentation for application software. Identical to ISO/IEC 18019:2004.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 160 pages

AS/NZS ISO/IEC 18028 Information technology - Security techniques - IT network security

AS/NZS ISO/IEC 18028.1:2008 Network security management


Provides IT professionals and general line management with detailed guidance on the planning, installation and ongoing
maintenance of IT networks. Identical to ISO/IEC 18028-1:2006.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 72 pages

AS/NZS ISO/IEC 18028.2:2006 Network security architecture


Provides detailed guidance on the security aspect of the management operation use of IT networks, and their inter-connections.
Identical to ISO/IEC 18028-2:2006.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 32 pages

AS/NZS ISO/IEC 18028.3:2006 Securing communications between networks using security gateways
Provides detailed guidance on the security aspects of the management, operation and use of IT networks, and their inter-
connections. Specifically defines techniques for securing information flows between networks using security gateways. Identical to
ISO/IEC 18028-3:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 32 pages

AS/NZS ISO/IEC 18028.4:2006 Securing remote access


Specifies the different types of remote access including the protocols in use, discusses the authentication issues related to remote
access and provides support when setting up remote access securely. Identical to ISO/IEC 18028-4:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 56 pages

AS/NZS ISO/IEC 18028.5:2008 Securing communications across networks using virtual private networks
Provides IT professionals and general line management with detailed guidance on securing communications across networks using
virtual private networks. Identical to ISO/IEC 18028-5:2006.
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 32 pages

AS/NZS ISO/IEC 18033 Information technology - Security techniques - Encryption algorithms

AS/NZS ISO/IEC 18033.1:2006 General


Provides definitions that apply in subsequent parts of ISO/IEC 18033. The nature of encryption is introduced, and certain general
aspects of its use and properties are described. Identical to and reproduced from ISO/IEC 18033-1:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

AS/NZS ISO/IEC 18033.2:2008 Asymmetric ciphers


Provides the Australian information security programming and development community with clear guidance to the selection and
implementation of appropriate encryption algorithms. Identical to ISO/IEC 18033-2:2006.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 136 pages

AS/NZS ISO/IEC 18033.3:2006 Block ciphers


Specifies block cipher algorithms. Identical to and reproduced from ISO/IEC 18033-3:2005.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 80 pages

AS/NZS ISO/IEC 18033.4:2006 Stream ciphers


Specifies stream cipher algorithms. Identical to and reproduced from ISO/IEC 18033-4:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages

AS/NZS ISO/IEC 18044:2006 Information technology - Security techniques - Information security incident management
Provides the information security community with clear guidance on formulating a structured and planned approach to the detection,
reporting and assessment of information security incidents. Identical to and reproduced from ISO/IEC TR 18044:2004.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 60 pages

AS/NZS ISO 18273:2006 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and
aluminium alloys - Classification
Specifies requirements for classification of solid wires and rods for fusion welding of aluminium and aluminium alloys. Identical to,
and reproduced from, ISO 18273:2004.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

AS/NZS ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded
metal arc welding of high strength steels - Classification
Provides requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength
steels. Adopted from ISO 18276:2005 with national modifications.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 40 pages

AS/NZS ISO 19011:2003 Guidelines for quality and/or environmental management systems auditing
Provides guidance on the principles of auditing, managing audit programmes, conducting quality management systems audits and
environmental management system audits, as well as guidance on the competence of quality and environmental management
system auditors. Identical to and reproduced from ISO 19011:2002.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 31 pages

AS/NZS ISO 19101:2003 Geographic information - Reference model


Provides the framework for the methods and contents of the ISO 19100 series of Standards. Identical to and reproduced from ISO
19101:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 42 pages

AS/NZS ISO 19103:2006 Geographic information - Conceptual schema language


Provides system designers and analysts with a profile of the Unified Modeling Language (UML) for use with geographic information,
and provides guidelines on how UML should be used to create standardized geographic information and service models.
Reproduced from and identical to ISO/TS 19103:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

AS/NZS ISO 19105:2002 Geographic information - Conformance and testing


Provides users of the ISO 19100 series of Standards with the framework, concepts, and criteria to be achieved to claim conformance
to those Standards.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 21 pages

AS/NZS ISO 19106:2005 Geographic information - Profiles


Specifies and provides geographic information system developers with the concept of a profile of the ISO geographic information
standards developed by ISO/TC 211. It provides the user with guidance for the creation of such profiles. Identical to and reproduced
from ISO 19106:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 44 pages

AS/NZS ISO 19107:2005 Geographic information - Spatial schema


Specifies conceptual schemas for describing the spatial characteristics of geographic features, and a set of spatial operations
consistent with these schemas. Identical to and reproduced from ISO 19107:2003.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 180 pages

AS/NZS ISO 19108:2003 Geographic information - Temporal schema


Provides the concepts for describing temporal characteristics of geographic information. Identical to and reproduced from ISO
19108:2002.
Reprinted to incorporate Amendment 1: 2008
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS ISO 19109:2006 Geographic information - Rules for application schema


Provides geographic information designers and analysts with defined rules for creating and documenting application schemas,
including principles for the definition of geographic feature. Reproduced from and identical to ISO 19109:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 80 pages

AS/NZS ISO 19110:2006 Geographic information - Methodology for feature cataloguing


Provides designers and analysts with a specification of how the classification of feature types is organized into a feature catalogue
and presented to the users of a set of geographic data. Reproduced from and identical to ISO 19110:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 64 pages

AS/NZS ISO 19111:2008 Geographic information - Spatial referencing by coordinates


Defines the conceptual schema for the description of spatial referencing by coordinates, optionally extended to spatio-temporal
referencing. It describes the minimum data required to define one-, two- and three-dimensional spatial coordinate reference systems
with an extension to merged spatial-temporal reference systems. It allows additional descriptive information to be provided. It also
describes the information required to change coordinates from one coordinate reference system to another. This Standard is
applicable to producers and users of geographic information. Although it is applicable to digital geographic data, its principles can be
extended to many other forms of geographic data such as maps, charts and text documents. The schema described can be applied
to the combination of horizontal position with a third non-spatial parameter which varies monotonically with height or depth. This
extension to non-spatial data is beyond the scope of this Standard but can be implemented through profiles. Identical to ISO
19111:2007.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 88 pages

AS/NZS ISO 19112:2005 Geographic information - Spatial referencing by geographic identifiers


Specifies and provides geographic information system developers with defined spatial reference systems using geographic
identifiers and assists in understanding the spatial references used in datasets. Identical to and reproduced from ISO 19112:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages

AS/NZS ISO 19113:2004 Geographic information - Quality principles


Provides the principles for describing the quality of geographic data and specifies components for reporting quality information. It
also provides an approach to organizing information about data quality. Identical to and reproduced from ISO 19113:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 40 pages
AS/NZS ISO 19114:2005 Geographic information - Quality evaluation procedures
Specifies and provides geographic information system developers with a framework of procedures for determining and evaluating
quality that is applicable to digital geographic datasets, consistent with the data quality principles defined in AS/NZS ISO 19113. It
establishes a framework for evaluating and reporting data quality results, either as part of data quality metadata only, or also as a
quality evaluation report. Identical to and reproduced from ISO 19114:2003.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 76 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS ISO 19115:2005 Geographic information - Metadata


Specifies and provides geographic information system developers with the schema required for describing geographic information
and services. It provides information about the identification, the extent, the quality, the spatial and temporal schema, spatial
reference, and distribution of digital geographic data. Identical to and reproduced from ISO 19115:2003.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 152 pages
Amendment 1, 2008 $34.95+GST (Members), $43.69+GST (Retail)

AS/NZS ISO 19116:2005 Geographic information - Positioning services


Specifies and provides geographic information system developers with the data structure and content of an interface that permits
communication between position providing device(s) and position-using device(s) so that the position-using device(s) can obtain and
unambiguously interpret position information and determine whether the results meet the requirements of the use. Identical to and
reproduced from ISO 19116:2004.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 64 pages

AS/NZS ISO 19117:2006 Geographic information - Portrayal


Provides geographic information system designers and analysts with a schema describing the portrayal of geographic information in
a form understandable by humans. It includes the methodology for describing symbols and mapping of the schema to an application
schema. It does not include standardization of cartographic symbols, and their geometric and functional description. Reproduced
from and identical to ISO 19117:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 48 pages

AS/NZS ISO 19118:2006 Geographic information - Encoding


Provides information system designers and analysts with the requirements for defining encoding rules to be used for interchange of
geographic data within the ISO 19100 series of International Standards, including: requirements for creating encoding rules based on
UML schemas, requirements for creating encoding services, and an informative XML based encoding rule for neutral interchange of
geographic data. Reproduced from and identical to ISO 19118:2005.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 116 pages

AS/NZS ISO 19119:2006 Geographic information - Services


Provides system designers and analysts with identification and definition of the architecture patterns for service interfaces used for
geographic information and definition of the relationships to the Open Systems Environment model. Reproduced from and identical
to ISO 19119:2005.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

AS/NZS ISO 19120:2006 Geographic information - Functional standards


Provides users with information on existing geographic information standards in use within the international community, other than
local standards (eg. ANZLIC); and identifies components and elements that can be harmonized with the ISO 19100 series.
Reproduced from and identical to ISO/TR 19120:2001.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

AS/NZS ISO 19121:2006 Geographic information - Imagery and gridded data


To provide systems designers and analysts with aspects of imagery and gridded data that have been standardized or are being
standardized in other ISO committees and external standards organizations, and that influence or support the establishment of raster
and gridded data standards for geographic information, and to describe the components of identified ISO and external imagery and
gridded data standards that can be harmonized with the ISO 19100 series of geographic information/geomatics standards.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 48 pages

AS/NZS ISO 19122:2006 Geographic information/Geomatics - Qualification and certification of personnel


Provides the geographical information and geomatics community with definitions to describe a system for the qualification and
certification of personnel in the field of Geographic Information/Geomatics by a central independent body. Reproduced from and
identical to ISO/TR 19122:2004.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 112 pages

AS/NZS ISO 19123:2006 Geographic information - Schema for coverage geometry and functions
Provides systems users and designers with definitions of conceptual schema for the spatial characteristics of coverages. Identical to
and reproduced from ISO 19123:2005.
Joint Australian/New Zealand Standard
$209.95+GST (Members), $262.44+GST (Retail), 76 pages

AS/NZS ISO 19125:- Geographic information - Simple feature access

19125.1:2004 Common architecture


Provides a common architecture and define terms to use within the architecture.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 52 pages

19125.2:2004 SQL option


Provides an SQL schema that supports storage, retrieval, query and update of simple geospatial feature collections via the SQL Call
Level Interface (SQL/CLI) (ISO/IEC 9075-3:1999).
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 72 pages

AS/NZS ISO 19127:2006 Geographic information - Geodetic codes and parameters


Provides system designers and analysts the rules for the population and maintenance of registers of geodetic codes and parameters
and to identify the data elements, in compliance with ISO 19111 and ISO 19135, required within these registers. Reproduced from
and identical to ISO/TS 19127:2005.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

AS/NZS ISO 19128:2006 Geographic information - Web map server interface


Provides systems users and designers with the specifics of the behaviour of a service that produces spatially referenced maps
dynamically from geographic information. It specifies operations to retrieve a description of the maps offered by a server, to retrieve
a map, and to query a server about features displayed on a map. Identical to and reproduced from ISO 19128:2005.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 84 pages

AS/NZS ISO 19131:2008 Geographic information - Data product specifications


Describes requirements for the specification of geographic data products based upon the concepts of other ISO 19100 Standards.
Identical to ISO 19131:2007.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 52 pages

AS/NZS ISO 19133:2006 Geographic information - Location based services - Tracking and navigation
Provides users and designers with a description of the data types, and operations associated with those types, for the
implementation of tracking and navigation services. Identical to and reproduced from ISO 19133:2005.
Joint Australian/New Zealand Standard
$269.95+GST (Members), $337.44+GST (Retail), 152 pages
AS/NZS ISO 19134:2008 Geographic information - Location-based services - Multimodal routing and navigation
Specifies the data types and their associated operations for the implementation of multimodal location-based services for routing and
navigation. It is designed to specify web services that may be made available to wireless devices through web-resident proxy
applications, but is not limited to that environment. Identical to ISO 19134:2007.
Joint Australian/New Zealand Standard
$89.95+GST (Members), $112.44+GST (Retail), 48 pages

AS/NZS ISO 19135:2006 Geographic information - Procedures for item registration


Provides users and designers with the procedures to be followed in establishing, maintaining and publishing registers of unique,
unambiguous and permanent identifiers and meanings that are assigned to items of geographic information. Identical to and
reproduced from ISO 19135:2005.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 68 pages

AS/NZS ISO 19136:2008 Geographic information - Geography Markup Language (GML)


Provides a Geography Markup Language (GML) Standard. Has XML encoding in compliance with ISO 19118 for the transport and
storage of geographic information modelled in accordance with the conceptual modelling framework used in the ISO 19100 series of
Standards. Identical to ISO 19136:2007.
Joint Australian/New Zealand Standard
$319.95+GST (Members), $399.94+GST (Retail), 408 pages

AS/NZS ISO 19137:2008 Geographic information - Core profile of the spatial schema
Defines a core profile of the spatial schema specified in ISO 19107 that specifies, in accordance with ISO 19106, a minimal set of
geometric elements necessary for the efficient creation of application schemata. It supports many of the spatial data formats and
description languages already developed and in broad use within several nations or liaison organizations. Identical to ISO
19137:2007.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 24 pages

AS/NZS ISO 19138:2008 Geographic information - Data quality measures


Defines a set of data quality measures. These can be used when reporting data quality for the data quality subelements identified in
ISO 19113. Multiple measures are defined for each data quality subelement, and the choice of which to use will depend on the type
of data and its intended purpose. The data quality measures are structured so that they can be maintained in a register established
in conformance with ISO 19135. This Standard does not attempt to describe every possible data quality measure, only a set of
commonly used ones. Identical to ISO/TS 19138:2006.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

AS/NZS ISO 19139:2008 Geographic information - Metadata - XML schema implementation


Defines Geographic MetaData XML (gmd) encoding, an XML Schema implementation derived from ISO 19115. Identical to ISO/TS
19139:2007.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 124 pages

AS/NZS ISO/IEC 19500 Information technology - Open distributed processing

19500.2:2007 General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)


Provides software and systems engineers with a standard that specifies the General Inter-ORB Protocol (GIOP) for object request
broker (ORB) interoperability. GIOP can be mapped onto any connection-oriented transport protocol that meets a minimal set of
assumptions defined by this standard. Identical to ISO/IEC 19500-2:2003.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 108 pages

AS/NZS ISO/IEC 19759:2007 Software engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)
Provides software engineers and developers with a guide that characterizes the boundaries of the software engineering discipline
and provides topical access to the literature supporting that discipline. Identical to ISO/IEC TR 19759:2005.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 212 pages

AS/NZS ISO/IEC 19760:2007 Software engineering - A guide for the application of AS/NZS ISO/IEC 15288 (System life
cycle processes)
Provides Systems Engineers with guidance for the application of AS/NZS ISO/IEC 15288 Systems engineering - System life cycle
processes. This Technical Report can be used as a companion document to the Standard.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 84 pages

AS/NZS ISO/IEC 19761:2008 Software engineering - COSMIC-FFP - A functional size measurement method
Provides Software Engineers with a Standard which specifies the set of definitions, conventions and activities of the COSMIC-FFP
Functional Size Measurement Method. Identical to ISO/IEC 19761:2003.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages

AS/NZS ISO/IEC 19770 Information technology - Software asset management

19770.1:2007 Processes
Provides a baseline for an integrated set of processes for Software Asset Management (SAM). The Standard enables an
organization to prove that it is performing Software Assets Management (SAM) to a Standard sufficient to satisfy corporate
governance requirements and ensure effective support for IT service management overall. Identical to ISO/IEC 19770-1:2006.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages

AS/NZS ISO/IEC 19790:2006 Information technology - Security techniques - Security requirements for cryptographic
modules
Provides the security practitioner with four increasing, qualitative levels of security requirements intended to cover a wide range of
potential applications and environments. The security requirements cover cryptographic module ports and interfaces; roles, services,
and authentication; finite state model; physical security; operation environment; cryptographic key management; self-tests; design
assurance; and mitigation of other attacks. Identical to and reproduced from ISO/IEC 19790:2006.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 51 pages

AS/NZS ISO/IEC 20926:2008 Software engineering - IFPUG 4.1 Unadjusted functional size measurement method -
Counting practices manual
Provides Software Engineers with a clear and detailed description of function point counting; a foundation to ensure that counts are
consistent; guidance to allow function point counting of Functional User Requirements from the deliverables of popular software
development methodologies and techniques; and a framework to enable automated support for function point counting. Identical to
ISO/IEC 20926:2003.
Joint Australian/New Zealand Standard
$339.95+GST (Members), $424.94+GST (Retail), 360 pages

AS/NZS ISO/IEC 20968:2004 Software engineering - Mk II function point analysis - Counting practices manual
Defines Mk II FPA function point analysis and provides a methodology for the quantitative analysis and measurement of information
processing applications. Identical to and reproduced from ISO/IEC 20968:2002.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 93 pages

AS/NZS ISO 22608:2007 Protective clothing - Protection against liquid chemicals - Measurement of repellency,
retention, and penetration of liquid pesticide formulations through protective clothing
materials
Specifies a test method to measure repellency, retention and penetration of a known volume of liquid pesticide when applied to
protective clothing material. Identical to ISO 22608:2004.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages
AS/NZS ISO/IEC 23026:2006 Software engineering - Recommended practice for the Internet - Web Site Engineering,
Web Site Management, and Web Site Life Cycle
Provides Website Designers and Engineers with definitions and recommended practices for World Wide Web page engineering for
Intranet and Extranet environments, based on World Wide Web Consortium (W3C ®) and related industry guidelines. Identical to
and reproduced from ISO/IEC 23026:2006.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 84 pages

AS/NZS 23081 Information and documentation - Records management processes - Metadata for records

23081.2:2007 Conceptual and implementation issues


Establishes a framework for defining metadata elements consistent with the principles and implementation considerations outlined in
ISO 23081-1:2006. It also identifies some of the critical decision points that need to be addressed and documented to enable
implementation of metadata for managing records. Identical to ISO 23081-2:2007.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 44 pages

AS/NZS 23950:1999 Information and documentation - Information retrieval (Z30.50) - Application service
definition and protocol specification
Defines the Information Retrieval Application Service and specifies the Information Retrieval Application Protocol. The service
definition describes services that support capabilities within an application; the services in turn are supported by the Z39.50 protocol.
The protocol specification includes the definition of the protocol information, the rules for exchanging this information, and the
conformance requirements to be met by implementation of this protocol. It is intended for systems supporting information retrieval
services and for organizations such as information services, universities, libraries and union catalogue centres. This Standard
addresses the connection-oriented, program-to-program communications. It does not address interchange of the information with
terminals or via other physical means. This Standard is identical with and has been reproduced from ISO 23950:1998.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 154 pages

AS/NZS ISO/IEC 24570:2007 Software engineering - NESMA functional size measurement method version 2.1 -
Definitions and counting guidelines for the application of Function Point Analysis
Provides Software Engineers with the NESMA version 2.1 method to measure the functional size of software; gives guidelines on
how to determine the components of functional size of software; specifies how to calculate the functional size as a result of the
method; and gives guidelines for the application of the method. Identical to and reproduced from ISO/IEC 24570:2005.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 132 pages

AS/NZS ISO/IEC 24702:2007 Telecommunications installations - Generic cabling - Industrial premises


Specifies generic cabling that supports a wide range of communications services including automation, process control and
monitoring applications for use within industrial premises or industrial areas within other types of premises comprising single or
multiple buildings on a campus. Identical to ISO/IEC 24702:2006.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 88 pages

AS/NZS ISO/IEC 25000:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Guide to SQuaRE
Provides guidance on Software Product Quality Requirements and Evaluation (SQuaRE). Overview; common reference models and
definitions, as well as relationship among the documents. Identical to ISO/IEC 25000:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

AS/NZS ISO/IEC 25051:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Requirements for quality of Commercial Off-The-Shelf (COTS) software product and
instructions for testing
Provides a guide for Commercial Off-The-Shelf (COTS) software products quality guide; requirements for test; and instructions for
conformity. Identical ISO/IEC 25051:2006.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 36 pages
AS/NZS ISO/IEC 25062:2006 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Common Industry Format (CIF) for usability test reports
Provides software usability professionals within supplier organisations and customer organisations with a software usability testing
Standard; the Standard is a key factor in predicting successful deployment of software. Identical to and reproduced from ISO/IEC
25062:2006.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 56 pages

AS/NZS ISO/IEC 27001:2006 Information technology - Security techniques - Information security management systems -
Requirements
Specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a
documented ISMS within the context of the organization’s overall business risks. Identical to and reproduced from ISO/IEC
27001:2005.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

AS/NZS ISO/IEC 27002:2006 Information technology - Security techniques - Code of practice for information
management
Provides a practical guideline for developing organizational security, standards and effective security management practices and to
help build confidence in inter-organisational activities. Identical to and reproduced from ISO/IEC 17799:2005.
Renumbered to become AS/NZS ISO/IEC 27002:2006 by Amendment 1:2008 to AS/NZS ISO/IEC 17799:2006, which is
incorporated in the renumbered Standard.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 132 pages

AS/NZS 60065:2003 Audio, video and similar electronic apparatus - Safety requirements
Specifies electrical safety requirements for apparatus intended for the reception, generation, recording or reproduction of audio,
video or associated signals. Adopted from IEC 60065:2001, with modifications for Australia/New Zealand conditions.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 163 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60076 Power transformers

AS/NZS 60076.3:2008 Insulation levels, dielectric tests and external clearances in air
Provides designers, suppliers, purchasers and users of oil-immersed power transformers with requirements for insulation levels,
dielectric tests and minimum external clearances in air between live parts of bushings and to objects at earth potential. Adopted with
national modifications from IEC 60076-3:2000, including Corrigendum 1: 2000.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 72 pages

AS/NZS 60079 Electrical apparatus for explosive gas atmospheres

AS/NZS 60079.0:2008 Equipment - General requirements


Specifies the general requirements for construction, testing and marking of electrical apparatus, Ex cable glands and Ex
components, intended for use in explosive gas atmospheres. This Standard does not specify requirements for safety, other than
those directly related to the explosion risk. Identical to and reproduced from IEC 60079-0, Ed. 5.0(2007).
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 100 pages

AS/NZS 60079.1:2007 Equipment protection by flameproof enclosures 'd'


Sets out the requirements for the construction and testing of electrical apparatus with pressurized enclosures, of protection type ‘p’,
intended for use in explosive gas atmospheres. Identical with and reproduced from IEC 60079-1, Ed.6.0 (2007).
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 76 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)
AS/NZS 60079.1.1:2002 Method of test for ascertainment of maximum experimental safe gap
Specifies a test method for the measurement of the maximum experimental safe gaps for gas- or vapour-air mixture under normal
conditions of temperature and pressure so as to permit the selection of an appropriate group of flameproof enclosures. This
Standard has been reproduced from and is identical to IEC 60079-1-1:2002.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 7 pages

60079.2:2007 Equipment protection by pressurized enclosure 'p'


Sets out the requirements for the construction and testing of electrical apparatus with pressurized enclosures, of protection type 'p',
intended for use in explosive gas atmospheres. Identical to IEC 60079-2:2007.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 56 pages

AS/NZS 60079.4:2000 Method of test for ignition temperature


Describes a test to determine the ignition temperature of a vapour or chemically pure gas in air, at atmospheric pressure. This
Standard is identical with and has been reproduced from IEC 60079-4:1975, its Amendment 1:1995 and IEC 60079-4A:1970.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

AS/NZS 60079.5:2007 Equipment protection by powdered filling 'q'


Sets out the requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex
components in the type of protection powder filling 'q', intended for use in explosive gas atmospheres.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 60079.6:2007 Equipment protection by oil immersion ‘o’


Sets out the requirements for the construction and testing of oil-immersed electrical equipment, oil-immersed parts of electrical
equipment and Ex components in the type of protection oil immersion 'o', intended for use in explosive gas atmospheres.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 20 pages

AS/NZS 60079.7:2006 Equipment protection by increased safety 'e'


Specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased
safety ‘e’ intended for use in explosive gas atmospheres. Applies to electrical apparatus where the rated voltage does not exceed 11
kV r.m.s. a.c. or d.c. Identical to IEC 60079-7, Ed. 4.0 (2006).
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 80 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60079.10:2004 Classification of hazardous areas


Specifies the classification of hazardous areas where flammable gas or vapour risks may arise, in order to permit the proper
selection and installation of apparatus for use in such areas. Modified adoption of IEC 60079-10:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 54 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60079.11:2006 Equipment protection by intrinsic safety 'i'


Specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive gas atmosphere and for
associated apparatus, which is intended for connection to intrinsically safe circuits which enter such atmospheres. Identical to IEC
60079-11, Ed. 5.0 (2006).
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 116 pages

AS/NZS 60079.12:2000 Classification of mixtures of gases or vapours with air according to their maximum
experimental safe gaps and minimum igniting currents
Gives guidance on the selection of the appropriate group or sub-group of electrical apparatus, protected by flameproof enclosure or
designed to be intrinsically safe, according to the gas or vapour in which it is intended to be used. Provides a classification of most
used gases and vapours and gives guidance on tests to classify additional gases or vapours not listed in this Standard. This
Standard is identical with and has been reproduced from IEC/TR 60079-12:1978.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 10 pages

AS/NZS 60079.15:2006 Construction, test and marking of type of protection, 'n' electrical apparatus
Specifies requirements for the construction, testing and marking for Group II electrical apparatus with type of protection, 'n' intended
for use in explosive gas atmospheres. Is applicable to non-sparking electrical apparatus and also to electrical apparatus with parts or
circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the way specified in this Standard, could be
capable of igniting a surrounding explosive gas atmosphere. This Standard describes several different methods by which this can be
achieved which may be combined with other methods described in AS/NZS 60079.0. This part supplements the general
requirements in AS/NZS 60079.0. Identical to and reproduced from IEC 60079-15:2005.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 80 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60079.18:2005 Construction, test and marking of type of protection encapsulation 'm' electrical apparatus
Specifies requirements for the construction, testing and marking of electrical apparatus, parts of electrical apparatus and Ex
components with the type of protection encapsulation ‘m’. This part of AS/NZS 60079 only applies for encapsulated electrical
apparatus, encapsulated parts of electrical apparatus and encapsulated Ex components where the rated voltage does not exceed 10
kV with a relative tolerance of +10%. This Standard supplements the general requirements in AS/NZS 60079.0. It is identical with
and has been reproduced from IEC 60079-18:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

AS/NZS 60079.20:2000 Data for flammable gases and vapours, relating to the use of electrical apparatus
Gives guidance on the selection of appropriate electrical apparatus, protected by flame-proof enclosure or designed to be intrinsically
safe, according to the gas or vapour in which it is intended to by used.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 30 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60079.25:2004 Intrinsically safe systems


Provides the specific requirements for construction and assessment of intrinsically safe electrical systems, type of protection 'i',
intended for use, as a whole or in part, in explosive atmospheres in Group II locations. Reproduced from and identical to IEC 60079-
25:2003.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 58 pages

AS/NZS 60079.26:2007 Equipment with equipment protection level (EPL) Ga


Specifies requirements for construction, test and marking for electrical apparatus of Group II intended for use in Zone 0 hazardous
areas, in which explosive gas atmospheres caused by mixtures of air and gases, vapours or mists under normal atmospheric
conditions are present continuously, for long periods or frequently. Identical to IEC 60079-26, Ed. 2.0 (2006).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages

AS/NZS 60079.27:2008 Fieldbus intrinsically safe concept (FISCO)


Contains the details of apparatus, systems and installation practice for use with the Fieldbus Intrinsically Safe Concept (FISCO). It is
based on the concepts of Manchester encoded, bus powered systems designed in accordance with IEC 61158-2 which is the
physical layer standard for Fieldbus installations.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

AS/NZS 60079.28:2007 Protection of equipment and transmission systems using optical radiation
Explains the potential ignition hazard from equipment using optical radiation intended for use in explosive gas atmospheres. It also
covers equipment, which itself is located outside but its emitted optical radiation enters such atmospheres. It describes precautions
and requirements to be taken when using optical radiation transmitting equipment in explosive gas atmospheres. Identical to IEC
60079-28, Ed. 1.0 (2006).
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 36 pages

AS/NZS 60079.29 Gas detectors

AS/NZS 60079.29.1:2008 Performance requirements of detectors for flammable gases


Provides general requirements for construction, testing and performance, and describes the test methods that apply to portable,
transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. Identical
to IEC 60079-29-1, Ed. 1.0 (2007).
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages
AS/NZS 60079.29.2:2008 Selection, installation, use and maintenance of detectors for flammable gases and oxygen
Gives guidance on, and recommended practice for, the selection, installation, safe use and maintenance of electrically operated
group II apparatus intended for use in industrial and commercial safety applications for the detection and measurement of flammable
gases. Identical to IEC 60079-29-2, Ed. 1.0 (2007).
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 96 pages

AS/NZS 60079.30.1:2007 Electrical resistance trace heating - General and testing requirements
Specifies general and testing requirements for electrical resistance trace heaters for application in explosive gas atmospheres. The
standard covers trace heaters that may comprise either factory- or field- (work-site) assembled units, and which may be series
heating cables, parallel heating cables or heating pads and heating panels that have been assembled and/or terminated in
accordance with the manufacturer’s instructions. Identical to IEC 60079-30-1, Ed.1.0 (2007).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 32 pages

AS/NZS 60079.30.2:2007 Electrical resistance trace heating - Application guide for design, installation and
maintenance
Provides guidance for the application of electrical resistance heating systems in areas where explosive gas atmospheres may be
present; it also provides guidance for the design, installation and maintenance of trace heating equipment and associated control
and monitoring equipment. Based on IEC 60079-30-2, Ed.1.0 (2007) with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 56 pages

AS/NZS 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid
insulating materials
Describes a method of test intended to indicate the relative resistance of solid electrical insulating materials to tracking for voltages
up to 600 V when the surface is exposed, under electric stress, to water with the addition of contaminants. This Standard is identical
with and has been reproduced from IEC 60112:2003.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 21 pages

AS/NZS 60137:2008 Insulated bushings for alternating voltages above 1000 V


Provides designers, manufacturers, suppliers, purchasers, test laboratories and users with requirements and tests for bushings for
use with electrical equipment with a voltage above 1 000 V a.c. and a frequency in the range 15-60 Hz. Adopted with national
modifications from IEC 60137, Ed. 5.0 (2003).
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 60 pages

AS/NZS 60155:2000 Glow-starters for fluorescent lamps


Specifies general and safety requirements for glow-starters for fluorescent lamps. It is reproduced from IEC 60155:1993 and IEC
60155/Amend.1:1995 but has additional local requirements for ignitability and combustion propagation.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 25 pages
Amendment 1, 2000 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2000 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60227:- Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

60227.5:2003 Flexible cables (cords)


Provides the specification for polyvinyl chloride insulated flexible cable (cords) of rated voltages up to and including 300/500V. This
Standard is identical with and has been reproduced from IEC 60227-5, Edition 2.1:1998.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60238:2007 Edison screw lampholders


Specifies particular requirements for Edison screw lampholders used in general purpose lighting. Based on IEC 60238, Ed.8.0
(2004) with national modifications.
Joint Australian/New Zealand Standard
$219.95+GST (Members), $274.94+GST (Retail), 80 pages

AS/NZS 60245:- Rubber insulated cables - Rated voltage up to and including 450/750 V

60245.4:2003 Cords and flexible cables


Provides the specification for rubber insulated flexible cords and flexible cables of rated voltages up to and including 450/750 V. This
Standard is identical with and has been reproduced from IEC 60245-4:1994.
Reprinted to incorporate Amendment 1:2004, which is identical to IEC Amendment 2
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60265 High-voltage switches

60265.1:2001 Switches for rated voltages above 1 kV and less than 52 kV


Applies to three-phase a.c. switches and switch-disconnectors having making and breaking current ratings, for indoor and outdoor
installations, for rated voltages above 1 kV and less than 52 kV and for rated frequencies from 16 2/3 Hz up to and including 60 Hz.
Is also applicable to the operating devices of these switches and to their auxiliary equipment. It is intended to be read in conjunction
with AS/NZS 2650. This Standard is technically equivalent to and contains the full content of IEC 60265:1998 and its
Corrigendum:2000.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 47 pages

AS/NZS 60269:- Low-voltage fuses

60269.1:2000 (Withdrawn)

60269.2.0:2000 (Withdrawn)

60269.2.1:2001 (Withdrawn)

60269.3.0:2000 (Withdrawn)

60269.3.1:2002 Sections I to IV: Examples of types of standardized fuses


Provides additional specific requirements to AS/NZS 60269.1:2000 and AS/NZS 60269.3.0:2000 for 'gG' type fuses with rated
currents not exceeding 100 A and rated voltages not exceeding 500 V for use by unskilled persons for domestic and similar
applications. This Standard is identical with and has been reproduced from Consolidated edition 1-2 (2001-06) of IEC 60269-3-1,
which contains IEC 60269-3-1:1994, its Amendment 1:1995 and Amendment 2:2001.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 108 pages

60269.4.0:2000 (Withdrawn)

AS/NZS 60320:- Appliance couplers for household and similar general purposes

60320.1:2004 General requirements


Specifies essential safety and associated requirements for two-pole appliance couplers for a.c. only, with or without earthing contact,
with a rated voltage not exceeding 250V and a rated current not exceeding 16A, for household and similar general purposes and
intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply. Adopts,
with national modifications, IEC 60320-1, Ed. 2.0 (2001).
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 132 pages

60320.2.1:2004 Sewing machine couplers


Specifies essential safety and associated requirements for special purpose appliance couplers for household sewing machines and
suitable for a.c. only with a rated voltage not exceeding 250V and a rated current not exceeding 25A. To be used in conjunction with
AS/NZS 60320.1. Adopts, with national modifications, IEC 60320-2-1, Ed. 2.0 (2000).
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

60320.2.2:2004 Interconnection couplers for household and similar equipment


Specifies essential safety and associated requirements for two-pole interconnection couplers for a.c. only, with or without an earthing
contact and having a rated voltage not exceeding 250V and a rated current not exceeding 16A. The couplers are intended for the
interconnection of the electrical supply to electrical appliances or equipment. To be used in conjunction with AS/NZS 60320.1.
Adopts, with national modifications, IEC 60320-2-2, Ed. 2.0 (1998).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 44 pages

AS/NZS 60335:- Household and similar electrical appliances

60335.1:2002 General requirements


Specifies general safety requirements for approval and test purposes. This Standard is an adoption with national modifications and
contains the full text of IEC 60335-1:2001.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 133 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2:- Safety

60335.2.2:2002 Particular requirements for vacuum cleaners and water suction cleaning appliances
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-2:2002.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 24 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.3:2002 Particular requirements for electric irons


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-3:2002.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.4:2002 Particular requirements for spin extractors


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-4:2002.
Reprinted to incorporate Amendment 1:2004 and Amendment 2:2006
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.5:2002 Particular requirements for dishwashers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-5:2002.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.6:2008 Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
Deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage
being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances.
Adopted with national modifications from IEC 60335-2-6 Ed 5.2.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 55 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.7:2002 Particular requirements for washing machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-7:2002.
Reprinted to incorporate Amendments 1 to 3
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.8:2004 Particular requirements for shavers, hair clippers and similar appliances
Deals with the safety of electric shavers, hair clippers and similar appliances, their rated voltage being not more than 250 V, intended
for household and similar purposes. Examples of similar appliances are those used for manicure and pedicure. Appliances intended
to be used by laymen in shops and on farms, are within the scope of this standard. Examples of such appliances are animal clippers,
animal shearers and appliances for hairdressers. Modified adoption of IEC 60335.2.8:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.9:2002 Particular requirements for grills, toasters and similar portable cooking appliances
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-9:2002.
Reprinted to incorporate Amendments 1, 2, 3 & 4
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.10:2006 Particular requirements for floor treatment machines and wet scrubbing machines
Deals with the safety of electric floor treatment and wet scrubbing machines intended for household and similar purposes, their rated
voltage being not more than 250 V. Examples of floor treatment machines are floor buffers, polishers and waxers. Examples of wet
scrubbing machines are floor scrubbers, rug shampooers and upholstery shampooers. Identical to and reproduced from IEC
60335.2.10 Ed. 5:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.11:2002 Particular requirements for tumble dryers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-11:2002.
Reprinted to incorporate Amendment 1:2004 and Amendment 2:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.12:2004 Particular requirements for warming plates and similar applliances


Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for
household and similar purposes, their rated voltage being not more than 250 V. Appliances intended to be used by laymen in shops,
in light industry and on farms, are also within the scope of this standard. Identical to and reproduced from IEC 60335.2.12:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

60335.2.13:2004 Particular requirements for deep fat fryers, frying pans and similar appliances
Deals with the safety of electric deep fat fryers, frying pans and other appliances in which oil is used for cooking, and intended for
household use only, their rated voltage being not more than 250 V. Modified adoption of IEC 60335.2.13:2002.
Reprinted to incorporate Amendment 1:2005 & Amendment 2:2008
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.14:2007 Particular requirements for kitchen machines


Deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V.
Based on IEC 60335-2-14 Ed.5.0 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

60335.2.15:2002 Particular requirements for appliances for heating liquids


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-15:2002.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 25 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.16:2006 Particular requirements for food waste disposers


Deals with the safety of electric food waste disposers for household and similar purposes, their rated voltage being not more than
250 V. This standard does not apply to portable food waste disposers; food waste disposers of the incinerator type; appliances
intended exclusively for industrial or commercial purposes; appliances intended to be used in locations where special conditions
prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas). Identical to and reproduced from IEC
60335.2.16 Ed. 5:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.17:2004 Particular requirements for blankets, pads and similar flexible heating appliances
This standard deals with the safety of electric blankets, pads and other flexible appliances which heat the bed or human body, for
household and similar purposes, their rated voltage being not more than 250 V. It also applies to control units supplied with the
appliance. Modified adoption of IEC 60335.2.17:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 54 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.21:2002 Particular requirements for storage water heaters


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-21:2002.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 27 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.23:2004 Particular requirements for appliances for skin or hair care


This standard deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for
household and similar purposes, their rated voltage being not more than 250 V. Modified adoption of IEC 60335.2.23:2003.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.24:2003 Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-24-2002.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 52 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2008 $24.95+GST (Members), $31.19+GST (Retail)
60335.2.25:2002 Particular requirements for microwave ovens, including combination microwave ovens
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-25:2002.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.26:2006 Particular requirements for clocks


Deals with the safety of electric clocks having a rated voltage not more than 250 V. Examples of appliances that are within the
scope of this standard are alarm clocks; spring-driven clocks with an electrically operated winding mechanism; clocks incorporating
driving means other than motors. Does not apply to battery-operated clocks; appliances intended exclusively for industrial purposes;
appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive
atmosphere (dust, vapour or gas); clocks having other functions, whether or not in combination with time indication, such as master
control clocks and timers for cooking ranges, washing machines and similar appliances; clocks for "clocking-in" purposes; clocks
incorporating electronic circuits only. Based on IEC 60335-2-26 Ed. 4:2005 with national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

60335.2.27:2004 Particular requirements for appliances for skin exposure to ultraviolet and infrared
radiation
Deals with the safety of appliances for skin exposure to ultraviolet or infrared radiation, intended for normal household as well as
tanning salon and beauty parlor use. Appliance rated voltage being not more than 250 V single phase and 480 V for other
appliances. Identical to and reproduced from IEC 60335.2.27:2003.
Reprinted to incorporate Amendment 1:2005 & Amendment 2:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 22 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.28:2006 Particular requirements for sewing machines


Deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for
single-phase appliances and 480 V for other appliances. Overlock machines and electrical sets are within the scope of the standard.
Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as sewing
machines intended to be used by laymen in shops and in light industry, are within the scope of this standard. Does not apply to
appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail,
such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). Identical to and reproduced from IEC 60335-2-28
Ed. 4:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.29:2004 Particular requirements for battery chargers


Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage
being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on
farms. Modified adoption of IEC 60335.2.29:2003.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.30:2004 Particular requirements for room heaters


Applicable to the safety of electric room heaters, their rated voltage being not more than 250 V for single phase and 480 V for other
appliances, for household and similar purposes. Appliances intended to be used by laymen in shops, in light industry and on farms,
are also within the scope of this standard. Modified adoption of IEC 60335.2.30:2003.
Reprinted to incorporate Amendments 1 to 5
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 5, 2008 $29.95+GST (Members), $37.44+GST (Retail)
60335.2.31:2004 Particular requirements for range hoods
Deals with the safety of electric range hoods intended to be installed above household cooking ranges, hobs, and similar cooking
appliances, their rated voltage being not more than 250 V. A modified adoption of IEC 60335-2-31:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.32:2004 Particular requirements for massage appliances


Deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250
V for single phase and 480 V for other appliances. Some examples of appliances within the scope of this standard are foot
massagers, hand-held massagers, massage beds, massage chairs, massage pads and massage belts. Identical to and reproduced
from IEC 60335-2-32:2002.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.34:2003 Particular requirements for motor-compressors


Deals with the safety of sealed (hermetic and semi-hermetic) motor-compressors, and their protection and control systems. It
applies to motor-compressors tested separately, intended for household and similar appliances, by their rated voltage being not
more than 250V for single-phase motor-compressors and 480V for other motor-compressors. Examples of equipment which contain
motor-compressors are: refrigerators, ice makers, air-conditioners, heat pumps, and vending machines. It is to be read in conjunction
with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-34:2002
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.35:2004 Particular requirements for instantaneous water heaters


Deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water
below boiling temperature. The rated voltage being not more than 250 V for single phase and 480 V for other appliances. Identical to
and reproduced from IEC 60335-2-35:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.40:2006 Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
Deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers
incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single
phase appliances and 600 V for all other appliances. Appliances not intended for normal household use but which nevertheless may
be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are
within the scope of this standard. Also applies to electric heat pumps, air conditioners and dehumidifiers containing flammable
refrigerant. Identical to and reproduced from IEC 60335-2-40 Ed. 4.2:2006.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 71 pages

60335.2.41:2004 Particular requirements for pumps


Deals with the safety of electric pumps for liquids having a temperature not exceeding 90 degrees C, with a rated voltage of not more
than 250 V for single-phase and 480 V for other appliances. Examples of appliances within the scope of this standard are aquarium
pumps; pumps for garden ponds; sludge pumps; submersible pumps; table fountain pumps; vertical wet pit pumps. Pumps
incorporated in appliances are not covered by this standard unless a specific reference is made. A modified adoption of IEC 60335-
2-41:2004.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

60335.2.43:2005 Particular requirements for clothes dryers and towel rails


Deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow and to electric towel rails, for
household and similar purposes, their rated voltage being not more than 250 V. The clothes racks may be fixed or free-standing in a
cabinet. The air circulation may be natural or forced. This standard does not apply to tumble dryers (refer to AS/NZS 60335.2.11 for
tumble dryers). Reproduced with modifications from IEC 60335-2-43:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.44:2006 Particular requirements for ironers


Deals with the safety of electric ironers for household and similar purposes, their rated voltage being not more than 250 V for single-
phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be
a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are
within the scope of this standard. Examples of appliances within the scope of this standard are ironing presses for one-person
operation; mangles; rotary ironers for one-person operation; trouser presses. Identical to and reproduced from IEC 60335-2-44 Ed.
3:2003.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 23 pages

60335.2.45:2004 Particular requirements for portable heating tools and similar appliances
Deals with the safety of portable electric heating tools and similar appliances, their rated voltage being not more than 250 V.
Examples of appliances that are within the scope of this standard are branding tools; burning-in pens; conduit-soldering tools;
dehorning tools; de-soldering irons; firelighters; glue guns; heat guns; paint strippers; plastic-cutting tools; soldering guns; soldering
irons; stripping pliers and thermoplastic conduit-welding tools. Identical to and reproduced from IEC 60335-2-45:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

60335.2.51:2006 Particular requirements for stationary circulation pumps for heating and service water
installations
Deals with the safety of electric stationary circulation pumps intended for use in heating systems or in service water systems, having
a rated power input not exceeding 300 W, their rated voltage being not more than 250 V for single-phase appliances and 480 V for
other appliances. The hydraulic and electrical parts of the pump may be in the same enclosure, so that the water flows through the
motor and serves as a coolant, or they may be separated. Appliances not intended for normal household use, but that nevertheless
may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms,
are within the scope of this standard. Identical to and reproduced from IEC 60335-2-51 Ed. 3:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.52:2006 Particular requirements for oral hygiene appliances


Deals with the safety of electric oral hygiene appliances for household and similar purposes, their rated voltage being not more than
250 V. Examples of appliances covered by this standard are oral irrigators; toothbrushes. Does not apply to appliances for medical
purposes. Identical to and reproduced from IEC 60335-2-52 Ed. 3:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

60335.2.53:2006 Particular requirements for sauna heating appliances


Deals with the safety of electric sauna heating appliances having a rated power input not exceeding 20 kW, their rated voltage being
not more than 250 V for single-phase and 480 V for other appliances. Sauna heating appliances may be of the thermal storage type.
Does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive
or explosive atmosphere (dust, vapor or gas); appliances intended to cause perspiration to only one part of the human body;
sweating baths where the head of the user remains outside the heated space; tents and other collapsible sauna baths.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 23 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.54:2005 Particular requirements for surface-cleaning appliances for household use employing
liquids or steam
Deals with the safety of electric cleaning appliances for household use that are intended for cleaning surfaces such as windows,
walls, and empty swimming pools by use of liquid cleansing agents or steam. Applicable to appliances with rated voltage of not more
than 250 V. The appliance may incorporate heating elements or means for pressurizing the liquid container. Identical to and
reproduced from IEC 60335-2-54:2002.
Will supersede AS/NZS 3350.2.54:1997 on 17 June 2012; Reprinted to incorporate Amendment 1 :2007
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 24 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.55:2004 Particular requirements for electrical appliances for use with aquariums and garden ponds
Deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated
voltage being not more than 250 V. Examples of appliances within the scope of this standard are aerators; aquarium heaters;
automatic food dispensers; sludge-suction appliances. A modified adoption of IEC 60335-2-55:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.56:2006 Particular requirements for projectors and similar appliances


Deals with the safety of electric projectors and similar appliances for household and similar purposes, their rated voltage being not
more than 250 V. Examples of appliances that are within the scope of this standard are effects projectors; film-strip projectors; film
viewers; microscope projectors; motion-picture projectors; opaque projectors (episcopes); opaque-transparency projectors
(epidiascopes); overhead projectors; photographic enlargers; photo-reproduction appliances; slide projectors (diascopes); slide-
sorting appliances. still viewers. Appliances may incorporate sound amplifiers. This standard does not apply to LCD and video
projectors; micrographic office equipment ; motion picture projectors for films having a width exceeding 16 mm; appliances intended
to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour
or gas); appliances for medical purposes. Identical to and reproduced from IEC 60335-2-56 Ed. 3:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.59:2005 Particular requirements for insect killers


Deals with the safety of electric insect killers, their rated voltage being not more than 250 V, for household and similar purposes.
Reproduced with modifications from IEC 60335-2-59:2002.
Will supersede AS/NZS 3350.2.59:1999 on 17 June 2012; Reprinted to incorporate Amendment 1:2005 and Amendment 2 :2006
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 21 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.60:2006 Particular requirements for whirlpool baths and whirlpool spas


Deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar purposes, their rated
voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Also applies to appliances for
circulating air or water in conventional baths. Appliances not intended for normal household use but that nevertheless may be a
source of danger to the public, such as appliances intended to be used by laymen in hotels, fitness centres and similar places, are
within the scope of this standard. Based on IEC 60335-2-60 Ed. 3.1:2005 with national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 23 pages

60335.2.61:2005 Particular requirements for thermal-storage room heaters


Deals with the safety of electric thermal-storage room heaters for household and similar purposes that are intended to heat the room
in which they are located, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
Reproduced with modifications from IEC 60335-2-61:2002.
Will supersede AS/NZS 3350.2.61:2001 on 17 June 2012; Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 26 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.65:2006 Particular requirements for air-cleaning appliances


Deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than
250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but that
nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry
and on farms, are within the scope of this standard. Does not apply to appliances intended exclusively for industrial purposes;
appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive
atmosphere (dust, vapour or gas); air-cleaning systems incorporated in the building structure. Identical to and reproduced from IEC
60335-2-65 Ed. 2:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 19 pages

60335.2.66:2004 Particular requirements for water-bed heaters


Deals with the safety of electric water-bed heaters and associated control units, their rated voltage being not more than 250 V, for
household and similar purposes. Appliances intended to be used in hotels, are also within the scope of this standard. Identical to
and reproduced from IEC 60335-2-66:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 18 pages
60335.2.67:2002 Particular requirements for floor treatment and floor cleaning machines, for industrial and
commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-67:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.68:2003 Particular requirements for spray extraction appliances, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-68:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.69:2003 Particular requirements for wet and dry vacuum cleaners, including power brush, for
industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-69:2002.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2008
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 40 pages
Amendment 1, 2005 $49.95+GST (Members), $62.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.70:2002 Particular requirements for milking machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-70:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 19 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.71:2002 Particular requirements for electrical heating appliances for breeding and rearing animals
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-71:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 19 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.72:2003 Particular requirements for automatic machines for floor treatment for commercial and
industrial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-72:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 28 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.73:2005 Particular requirements for fixed immersion heaters


Deals with the safety of fixed electric immersion heaters for household and similar purposes that are intended for installation in a
water tank for heating water to a temperature below its boiling point. The rated voltage is not more than 250 V for single-phase
appliances and 480 V for other appliances. Identical to and reproduced from IEC 60335-2-73:2002.
Will supersede AS/NZS 3350.2.73:1996 on 17 June 2012; Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.74:2005 Particular requirements for portable immersion heaters


Deals with the safety of portable electric immersion heaters, their rated voltage being not more than 250 V, for household and similar
purposes. Also includes appliances intended for use by laymen in shops, in light industry and on farms. Identical to and reproduced
from IEC 60335-2-74:2002.
Will supersede AS/NZS 3350.2.74:2001 on 17 June 2012; Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.75:2005 Particular requirements for commercial dispensing appliances and vending machines
Deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks
and consumer products, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Reproduced
from and identical to IEC 60335-2-75:2005.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

60335.2.76:2003 Particular requirements for electric fence energizers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-76:2002.
Will supersede AS/NZS 3350.2.76:1998 on 30 May 2010; Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 46 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.77:2002 Particular requirements for pedestrian controlled mains-operated lawnmowers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-77:2002.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 58 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.78:2005 Particular requirements for outdoor barbecues


Deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V.
Does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended
exclusively for industrial purposes, or appliances intended to be used in locations where special conditions prevail, such as the
presence of a corrosive or explosive atmosphere (dust, vapor or gas). Identical to and reproduced from IEC 60335-2-78:2002.
Will supersede AS/NZS 3350.2.78:1996 on 17 June 2012; Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.79:2002 Particular requirements for high pressure cleaners and steam cleaners, for industrial and
commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-79:2002.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2008
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 30 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.80:2004 Particular requirements for fans


Deals with the safety of electric fans, their rated voltage being not more that 250V for single-phase and 480V for other appliances,
intended for household and similar purposes. Appliances intended for use in shops, light industry and on farms, are within the scope
of this standard. A modified adoption of IEC 60335-2-80:2004.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 15 pages

60335.2.81:2006 Particular requirements for foot warmers and heating mats


Deals with the safety of electric foot warmers and heating mats for household and similar purposes, the rated voltage being not more
than 250 V. Appliances intended to be used by the layman in shops, in light industry and on farms are within the scope of this
standard.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 27 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.82:2006 Particular requirements for amusement machines and personal service machines
Deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not
more than 250 V for single-phase and 480 V for other appliances. Examples of amusement machines that are within the scope of
this standard are billiard tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting
appliances; pinball machines; video games. Examples of personal service machines that are within the scope of the standard are
card re-value machines; currency dispensers; luggage lockers; weighing machines and shoe shining appliances.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 23 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.83:2002 Particular requirements for heated gullies for roof drainage


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-83:2001.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages

60335.2.84:2006 Particular requirements for toilets


Deals with the safety of electric toilets in which excrement is stored, dried, or destructed, their rated voltage being not more than 250
V. Electric toilets may be used to process garbage such as paper and food waste. This standard also applies to electric equipment
for use with conventional toilets, examples of such equipment are automatic seat covering devices; chopping units; heated seats;
pumping units; water heaters for shower units.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 23 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.85:2005 Particular requirements for fabric steamers


Deals with the safety of electric fabric steamers intended for household and similar purposes, their rated voltage being not more than
250 V. Appliances not intended for normal household use, such as appliances to be used by laymen in laundries and dry cleaners,
are within the scope of this standard. Identical to and reproduced from IEC 60335-2-85:2002.
Will supersede AS/NZS 3350.2.85:1998 on 17 June 2012
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

60335.2.86:2002 Particular requirements for appliances for electric fishing machines


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-86:2002.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.87:2002 Particular requirements for electric animal-stunning equipment


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-87:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.89:2002 Particular requirements for commercial refrigerating appliances with an incorporated or


remote refrigerant condensing unit or compressor
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-89:2002.
Reprinted to incorporate Amendments 1 to 3
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 39 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)
60335.2.90:2006 Particular requirements for commercial microwave ovens
Deals with the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than
250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances; the safety of
combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA; the safety of microwave
ovens without a cavity door and with transportation means that are intended for commercial use only, for the heating of food and
beverages, the requirements for which are contained in Annex BB. Changes in this edition concern requirements for microwave
ovens without a cavity door and with transportation means that are intended for commercial use only for the heating of food and
beverages.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 55 pages

60335.2.91:2002 Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge
trimmers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-91:2002.
Reprinted to incorporate Amendments 1 and 2; Will be superseded by AS/NZS 60335.2.91:2008 on 31 October 2010
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 29 pages
Amendment 1, 2003 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.91:2008 Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge
trimmers
Deals with the safety of electric powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s)
of non metallic filament line or freely pivoting non metallic cutter(s), with a kinetic energy of not more than 10 J each, used by a
standing operator for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. In this standard, hand-held
and walk-behind lawn trimmers and lawn edge trimmers are referred to collectively as trimmer(s). This standard also deals with the
safety of lawn edge trimmers with rigid cutting means. Additional requirements for these appliances are given in Annex YY.
This Standard will supersede AS/NZS 60335.2.91:2002 on 31 October 2010
Joint Australian/New Zealand Standard
$79.95+GST (Members), $99.94+GST (Retail), 55 pages

60335.2.92:2003 Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and


aerators
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-92:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 47 pages

60335.2.94:2002 Particular requirements for scissor type grass shears


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-94:2002.
Will be superseded by AS/NZS 60335.2.94:2008 on 31 October 2010
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 21 pages

60335.2.94:2008 Particular requirements for scissors type grass shears


Deals with the safety of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed
primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. The term "grass shear" within this
standard means "electric powered scissors type grass shear".
This Standard will supersede AS/NZS 60335.2.94:2002 on 31 October 2010
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 51 pages

60335.2.95:2005 Particular requirements for drives for vertically moving garage doors for residential use
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated
voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the
movement of these electrically driven garage doors are included. Reproduced from and identical to IEC 60335-2-95:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 27 pages

60335.2.96:2002 Particular requirements for flexible sheet heating elements for room heating
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-96:2002.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 39 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.97:2007 Particular requirements for drives for rolling shutters, awnings, blinds and similar
equipment
Deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Drives for
equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this standard. Identical to
IEC 60335-2-97:2005.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 21 pages

60335.2.98:2005 Particular requirements for humidifiers


Deals with the safety of electric humidifiers for household and similar use, their rated voltage being not more than 250 V for single-
phase and 480 V for other appliances. Examples of appliances that are within the scope of this standard are appliances that atomize
water, appliances that evaporate water by heating and appliances that blow air through a moist element. Identical to and reproduced
from IEC 60335-2-98:2002.
Will supersede AS/NZS 3350.2.98:1998 on 17 June 2012
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 17 pages

60335.2.100:2003 Particular requirements for hand-held mains-operated garden blowers, vacuums and
blower vacuums
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-100-2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 18 pages

60335.2.101:2002 Particular requirements for vaporizers


Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-101:2002.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 15 pages

60335.2.102:2004 Particular requirements for gas, oil and solid-fuel burning appliances with electrical
connections
Deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes,
their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The electrical safety and
some other safety aspects of these appliances are also covered. All safety aspects are covered when the appliance also complies
with the relevant standard for the fuel-burning appliance. If the appliance incorporates electric-heating sources, it also has to comply
with the relevant Part 2 of IEC 60335. Examples of appliances within the scope of this standard are: central heating boilers;
commercial catering equipment; cooking appliances; laundry and cleaning appliances; room heaters; warm air heaters; water
heaters. A modified adoption of IEC 60335.2.102:2004.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.103:2007 Particular requirements for drives for gates, doors and windows
Deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers
the hazards associated with the movement of the driven part. Identical to IEC 60335-2-103 Ed 2.0.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages

60335.2.105:2006 Particular requirements for multifunctional shower cabinets


Deals with the safety of electric multifunctional shower cabinets for household and similar purposes, their rated voltage being not
more than 250 V for single-phase appliances and 480 V for other appliances. This standard however, in general, does not take into
account the use of appliances by young children or infirm persons without supervision, or playing with the appliance by young
children.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 23 pages
Amendment 1, 2008 $29.95+GST (Members), $37.44+GST (Retail)

60335.2.106:2007 Underfloor heating


Deals with the safety of heated carpets and similar appliances, and heating units to heat the room in which they are located and that
are intended to be installed directly under a floor covering that is itself intended to be removable, their rated voltage being not more
than 250 V for single-phase installations and 480 V for other installations. Reproduced from and identical to IEC 60335-2-103 Ed.1.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 42 pages

60335.2.108:2008 Particular requirements for electrolysers


Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in
appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to
electrolysers tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage
being not more than 250 V. Reproduced from IEC 60335-2-108 Ed.1.0 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 23 pages

AS/NZS 60432 Incandescent lamps - Safety specifications

60432.1:2007 Tungsten filament lamps for domestic and similar general lighting purposes
Specifies safety requirements for tungsten filament incandescent lamps for general lighting service. Identical to and reproduced from
IEC 60432-1 Ed. 2.1 (2005).
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 48 pages

60432.2:2007 Tungsten-halogen lamps for domestic and similar general lighting purposes
Specifies safety requirements for tungsten-halogen incandescent lamps that are new and not covered by AS/NZS 60432.1. Identical
to and reproduced from IEC 60432-2 Ed. 2.1 (2005).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

60432.3:2007 Tungsten-halogen lamps (non-vehicle)


Specifies requirements for tungsten-halogen lamps for photography, projectors, floodlighting, stage lighting and other general
purposes. Identical to and reproduced from IEC 60432-3 Ed. 1.1 (2005).
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 32 pages

AS/NZS 60479:- Effects of current on human beings and livestock

60479.1:2002 General aspects


Provides basic guidance on the general aspects of the effects of electrical currents on persons and livestock for the establishment of
electrical safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-1:1994.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

60479.2:2002 Special aspects


Provides basic guidance on the special aspects of the effects of electrical currents on persons for the establishment of electrical
safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-2:1987.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 22 pages

60479.3:2002 Effects of currents passing through the body of livestock


Provides basic guidance on the general aspects of the effects of electrical currents on livestock for the establishment of electrical
safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-3:1998.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 10 pages

AS/NZS 60598:- Luminaires

60598.1:2003 General requirements and tests


Specifies general and safety requirements for luminaires with related tests for mechanical and electrical constructions. This
document is reproduced from the Lumex WG draft Edition 6 of IEC 60598-1 and varied for Australian/New Zealand conditions.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 177 pages

60598.2:- Particular requirements

60598.2.1:1998 Fixed general purpose luminaires


Specifies minimum safety requirements for fixed general purpose luminaires for use with tungsten filament, tubular fluorescent and
other discharge lamps with a supply voltages not exceeding 1000 V. This part is to be read in conjunction with AS/NZS 60598.1, and
is identical to IEC 60598-2-1:1979.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 3 pages

60598.2.2:2001 Recessed luminaires


Specifies safety requirements for recessed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps
on supply voltage not exceeding 1000 V. It does not apply to air handling or liquid cooling luminaires. This document is reproduced
from IEC 60598.2.2:1996 including the IEC Amendment 1 and has been modified for Australian/New Zealand conditions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

60598.2.4:2005 Portable general purpose luminaires


Specifies minimum safety requirements for portable general purpose luminaires, other than handlamps and portable child appealing
luminaires, for use on supply voltages not exceeding 250 V. Reproduced from IEC 60598-2-4:1997 with national modifications.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

60598.2.5:2002 Floodlights
Specifies safety requirements for floodlights for use with tungsten filament, tubular fluorescent and other discharge lamps on supply
voltage up to 1000V. This document has been reproduced from IEC 60598.2.5, and modified to suit Australian/New Zealand
conditions.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 5 pages

60598.2.6:1998 Luminaires with built-in transformers for filament lamps


Specifies minimum safety requirements for luminaires with built-in transformers for filament lamps with supply voltages and output
voltages not exceeding 1000 V. This Part is to be read in conjunction with AS/NZS 60598.1:1998, and is equivalent to IEC 60598-2-
6:1994.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 10 pages

60598.2.7:2005 Portable luminaires for garden use


Provides the lighting industry with particular requirements for portable luminaires for garden use. Reproduced from IEC 60598-2-
7:1982 with national modifications.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

60598.2.8:2002 Handlamps
Specifies requirements for handlamps and similar portable luminaires for use with tungsten filament and tubular fluorescent lamps on
supply voltage up to 250 V. This Standard is reproduced from IEC 60598-2-8:2001 and has been modified for Australian/New
Zealand conditions.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 11 pages

60598.2.9:2006 Photo and film luminaires (non-professional)


Specifies particular requirements for photo and film luminaires. Reproduced from IEC 60598-2-9:1987 with national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

60598.2.10:1998 Portable child-appealing luminaires


Specifies minimum safety requirements for portable child-appealing luminaires for use with tungsten filament lamps with supply
voltages not exceeding 24 V. This part is to be read in conjunction with AS/NZS 60598.1:1998, and is equivalent to IEC 60598-2-
10:1987, including Amendment 1 and 2.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 5 pages
60598.2.17:2006 Luminaires for stage lighting, television, film and photographic studios (outdoor and
indoor)
Specifies particular requirements for luminaires for stage and photographic use. Reproduced from IEC 60598-2-17:1984 with
national modifications.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

60598.2.18:1998 Luminaires for swimming pools and similar applications


Specifies minimum safety requirements for fixed luminaires intended for use in water, or in contact with water, (e.g. in swimming
pools, fountains, garden pools and the like) and for use with tungsten filament lamps. This part is to be read in conjunction with
AS/NZS 60598.1:1998, and is equivalent to IEC 60598-2-18:1993.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages

60598.2.19:2001 Air handling luminaries (safety requirements)


Specifies safety requirements for air-handling luminaires for use with a ventilation duct or ventilated space (plenum), for use with
tubular fluorescent lamps on supply voltages not exceeding 1000 V. It is to be read in conjunction with those sections of Part 1 to
which reference is made. Attention is drawn to the fact that this section specifies only the safety aspects of air-handling luminaires;
no requirements are specified at present for performance aspects. Specifies safety requirements for air-handling luminaires for use
with a ventilation duct or ventilated space, for use with tubular fluorescent lamps on supply voltages up to 1000 V. It is reproduced
from IEC 60598.2.19:1981 including Amendments 1 and 2 and has been modified for Australian/New Zealand conditions.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

60598.2.20:2002 Lighting chains


Specifies minimum safety requirements for lighting chains fitted with series/parallel or combination of series parallel incandescent
lamps for indoor and outdoor use on supply voltage up to 250 V. This document is reproduced from IEC 60598-2-20:1998 and is
varied to suit Australian/New Zealand conditions. This document includes IEC draft amendment 2:2000.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

60598.2.22:2005 Luminaires for emergency lighting


Specifies particular requirements for emergency lighting luminaires for use on emergency power supplies up to 1000 V. Reproduced
from IEC 60598-2-22:2002 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

60598.2.23:2002 Extra low voltage lighting systems for filament lamps


Specifies requirements for extra low voltage lighting systems for filament lamps intended for ordinary interior use on supply voltages
up to 1000 V. This standard is based on IEC 60598.2.23.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

60598.2.25:2001 Luminaires for use in clinical areas of hospitals and health care buildings
Specifies requirements for luminaires for use with tungsten filament, fluorescent and other discharge lamps on supply voltages not
exceeding 1 000 V for use in clinical areas in which medical treatment, examination and medical care takes place in hospitals and
health care buildings. This standard does not apply to medical electrical equipment, as defined in Clause 2.2.15 of IEC 60601-1
AS/NZS 3200.1, containing a light source. This standard does not apply to luminaires for emergency lighting and luminaires for
general illumination in non-clinical areas (e.g. offices). For these luminaire types, reference should be made to other sections of IEC
60598-2 AS/NZS 60598.2. This standard does not apply to luminaires or parts of luminaires which are designed to be sterilized by
the autoclave process and luminaires for operating tables.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 60695:- Fire hazard testing

AS/NZS 60695.1:- Guidance for assessing the fire hazard of electrotechnical products

60695.1.1:2001 General guidelines


Provides guidance for assessing the fire hazard of electrotechnical products and for the resulting development of fire hazard testing
as related directly to harm to people, animals or property. Products, as defined in this Standard, relate to materials, components or
complete end use products. This Standard is technically equivalent to and reproduced from IEC 60695-1-1: 1999.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 41 pages

60695.2:- Glowing/hot wire based test methods

60695.2.10:2001 Glow-wire apparatus and common test procedure


Specifies a glow-wire test to simulate the effect of thermal stresses which may be produced by heat sources such as glowing
elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. Technically
equivalent to and reproduced from IEC 60695-2-10:2000.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 11 pages

60695.2.11:2001 Glow-wire flammability test method for end products


Specifies the details of the glow-wire test when applied to end-products such as electrotechnical equipment, its subassemblies, and
components for fire hazard testing. Technically equivalent to and reproduced from IEC 60695-2-11:2000.
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 7 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

60695.2.12:2001 Glow-wire flammability test method for materials


Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials
for flammability testing. Technically equivalent to and reproduced from IEC 60695-2-12:2000.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

60695.2.13:2001 Glow-wire ignitability test method for materials


Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials
for ignitability testing. Identical to and reproduced from IEC 60695-2-13:2000.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 4 pages

60695.4:2002 Terminology concerning fire tests


Gives defined terms which are applicable to fire hazard testing of electrotechnical products. This Standard is identical with and has
been reproduced from IEC 60695-4:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 24 pages

60695.10:- Guidance and test methods for the minimization of the effects of abnormal heat on
electrotechnical products involved in fires

60695.10.2:2004 Abnormal heat - Ball pressure test


The objective of this Standard is to provide guidance to manufacturers and designers, testing laboratories and similar organizations
on the application of the ball pressure test for testing for resistance to heat of non-metallic materials in order to assess the fire hazard
of electrotechnical products. Identical to and reproduced from IEC 60695.10.2:2003.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 14 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60695.11:- Test flames

60695.11.2:2004 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
Gives the detailed requirements for the production of a 1 kW nominal, propane based pre-mixed type test flame. It is applicable to
electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible
materials. Has the status of a basic safety publication in accordance with IEC Guide 104. Identical to and reproduced from IEC
60695.11.2:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

60695.11.3:2004 500 W flames - Apparatus and confirmational test methods


Gives the detailed requirements for the production of a nominal 500 W, pre-mixed type test flame. The approximate overall height is
125 mm. Four methods are given: flames A and D may only be produced using methane, flame B may only be produced using
propane and flame C may be produced using either methane or propane. Has the status of a basic safety publication in accordance
with IEC Guide 104. Identical to and reproduced from IEC/TS 60695-11-3:2004 including Amendment 1.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 31 pages

60695.11.4:2004 50 W flames - Apparatus and confirmational test methods


Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame, with an overall height of
approximately 20 mm. Three methods, A,B and C, are given: flame A is produced by methane; flames B and C are capable of being
produced with either methane or propane. Has the status of a Basic Safety Publication in accordance with IEC Guide 104. Identical
to and reproduced from IEC/TS 60695-11-4:2004 including Amendment 1.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 23 pages

60695.11.5:2005 Needle-flame test method - Apparatus, conformity test arrangement and guidance
Specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a
simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid
electrical insulating materials or other combustible materials. Reproduced from and identical to IEC 60695-11-5:2004.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

60695.11.10:2001 50 W horizontal and vertical flame test methods


Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other
non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. Identical to and reproduced from IEC
60695-11-10:1999.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 20 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

60695.11.20:2001 500 W flame test methods


Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other
non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power.
Identical to and reproduced from IEC 60695-11-20:1999.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 15 pages
Amendment 1, 2004 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60702:- Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V

60702.1:2005 Cables
Specifies the requirements for mineral-insulated metal sheathed (MIMS) cables with copper conductors and sheaths, intended for
use in electrical installations at working voltages of 500 V and 750 V. Identical to and reproduced from IEC 60702-1:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

60702.2:2005 Terminations
Specifies requirements for terminations for use with mineral-insulated mineral-sheathed (MIMS) cables complying with the
requirements of AS/NZS 60702.1. Identical to and reproduced from IEC 60702-2:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

AS/NZS 60745:- Hand-held motor-operated electrical tools

60745.1:2003 Safety - General requirements


Specifies general safety requirements for hand-held motor-operated electric tools. It is a base Standard which, when combined with
a particular Standard in the AS/NZS 60745 series, becomes a complete Standard for the particular hand-held motor-operated tool.
This Standard is technically equivalent to and has been reproduced from IEC 60745-1:2001.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 98 pages
Amendment 1, 2003 $74.95+GST (Members), $93.69+GST (Retail)
Amendment 2, 2004 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60745.2:- Safety


60745.2.1:2003 Particular requirements for drills and impact drills
Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-1:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 18 pages

60745.2.2:2003 Particular requirements for screwdrivers and impact wrenches


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-2:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 14 pages

60745.2.3:2006 Particular requirements for grinders, polishers and disk-type sanders


Applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and
disk-type sanders, including angle, straight and vertical with a rated capacity not exceeding 230 mm. Does not apply to random-orbit
polishers and random-orbit sanders, which are covered by IEC 60745-2-4.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 39 pages

60745.2.4:2003 Particular requirements for sanders and polishers other than disk type
Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-4:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

60745.2.5:2007 Particular requirements for circular saws


Applies to all types of circular saws except those used with abrasive wheels. Identical to IEC 60745-2-5 Ed 4.0.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 48 pages

60745.2.6:2003 Particular requirements for hammers


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-6:2003.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 18 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

60745.2.8:2003 Particular requirements for shears and nibblers


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-8:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

60745.2.9:2003 Particular requirements for tappers


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-9:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

60745.2.11:2003 Particular requirements for reciprocating saws (jig and sabre saws)
Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-11:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 14 pages

60745.2.12:2003 Particular requirements for concrete vibrators


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-12:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

60745.2.13:2006 Particular requirements for chain saws


Applies to chain saws for cutting wood and designed for use by one person. Does not cover chain saws designed for use in
conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine.
Does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 39 pages

60745.2.14:2003 Particular requirements for planers


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-14:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 13 pages

60745.2.15:2006 Particular requirements for hedge trimmers


Applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear
reciprocating cutter blades. Does not applicable to hedge trimmers with a rotating blade.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 31 pages

60745.2.17:2003 Particular requirements for routers and trimmers


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-17:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

60745.2.18:2003 Particular requirements for strapping tools


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-18:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

60745.2.19:2005 Particular requirements for jointers


Deals with jointers for cutting into wood or similar material. Reproduced from and identical to IEC 60745-2-19:2005.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

60745.2.20:2003 Particular requirements for band saws


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-20:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

60745.2.21:2003 Particular requirements for drain cleaners


Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-
phase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-21:2003.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages

AS/NZS 60840:2006 Power cables with extruded insulation and their accessories for rated voltages above 30
kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
Specifies test methods and requirements for electric cables and their accessories for rated voltages above 30 kV (Um = 36 kV) up to
150 kV (Um = 170 kV) that can be referenced in Australian/New Zealand Standards for polymeric insulated electric cables covering
this voltage range. Identical to and reproduced from IEC 60840:2004.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 60 pages

AS/NZS 60898:- Electrical accessories - Circuit-breakers for overcurrent protection for household and
similar installations

60898.1:2004 Circuit-breakers for a.c. operation


Provides essential safety and associated requirements for a.c. air-break circuit-breakers for operation at 50 Hz or 60 Hz, having a
rated voltage not exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated short-circuit capacity not
exceeding 25,000 A. Annex ZZ lists variations for Australian and New Zealand conditions. A modified adoption of IEC 60898-
1:2003.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 125 pages

60898.2:2004 Circuit-breakers for a.c. and d.c. operation


Provides essential safety and associated requirements for single-pole and two-pole circuit-breakers, suitable for operation with direct
current, with a rated d.c. voltage not exceeding 220 V for single-pole and 440 V for two-pole circuit-breakers, a rated current not
exceeding 125 A and a rated d.c. short-circuit capacity not exceeding 10,000 A. Annex ZZ lists variations for Australian and New
Zealand conditions. A modified adoption of IEC 60898-2:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 14 pages

AS/NZS 60901:2003 Single-capped fluorescent lamps - Performance specifications


Specifies performance requirements for single capped fluorescent lamps for general lighting service. This Standard is identical to
and reproduced from IEC 60901:2001, including Amendments 1 and 2.
Joint Australian/New Zealand Standard
$179.95+GST (Members), $224.94+GST (Retail), 191 pages

AS/NZS 60921:2002 Ballasts for tubular fluorescent lamps - Performance requirements


Specifies performance requirements for ballasts for tubular fluorescent lamps for use in a.c. supplies up to 1000 V. This applies to
complete ballasts and their allied components such as reactors, transformers and capacitors. This document should be read in
conjunction with general and safety requirements of ballasts covered in AS/NZS 60920.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 24 pages

AS/NZS 60922:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -
General and safety requirements
Specifies safety requirements for inductive-type ballasts for discharge lamps such as high-pressure mercury vapour, low- and high-
pressure sodium vapour and metal halide lamps for use on a.c. supplies up to 1000 V at 50 Hz or 60 Hz. The Standard is identical
with and has been reproduced from IEC 60922:1997.
Superseded by AS/NZS 61347.2.9:2004 but remains Current unitl 30 December 2006
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 35 pages

AS/NZS 60923:1998 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -
Performance requirements
Specifies performance requirements for inductive type ballasts for discharge lamps (such as high-pressure mercury vapour, low-
pressure sodium vapour, high-pressure sodium vapour and metal halide lamps). The ballasts are for use on supplies up to 1000 V at
50 Hz or 60 Hz. This Standard is technically equivalent to and has been reproduced from IEC 60923:1995.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 22 pages

AS/NZS 60925:2005 D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
Provides the lighting industry with performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps up to
250V. Reproduced from IEC 60925:2001 with national modifications.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 24 pages
AS/NZS 60927:2005 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance
requirements
Specifies performance requirements for starting devices (other than glow starters). Reproduced from IEC 60927:2004 with national
modifications.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 36 pages

AS/NZS 60928:2000 (Superseded by AS/NZS 61347.2.3:2004)

AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
Specifies performance requirements for electronic ballasts for tubular fluorescent lamps for use on a.c. supplies up to 1000V at 50
Hz or 60 Hz. Identical to and reproduced from IEC 60929:2003.
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 152 pages

AS/NZS 60950:- Information technology equipment - Safety

60950.1:2003 General requirements


Specifies safety requirements for electrically powered (both mains-powered and battery-powered) information technology equipment,
including electrical business telecommunications and associated equipment with a rated voltage not exceeding 600 V. This
Standard is technically equivalent to and has been reproduced from IEC 60950-1:2001 and Corrigendum 1:2002.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 246 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2008 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2008 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 60968:2001 Self ballasted lamps for general lighting services - Safety requirements
Specifies safety and interchangeability requirements along with test methods and conditions for compliance of tubular fluorescent
and other gas discharge lamps. This applies to lamps with built-in means for controlling, starting and stable operation.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 13 pages

AS/NZS 60969:2001 Self ballasted lamps for general lighting services - Performance requirements
Specifies performance requirements for self ballasted lamps for general lighting services. In addition specifies test methods and
conditions of compliances of tubular fluorescent and other gas discharge lamps for domestic and general lighting services.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 7 pages

AS/NZS 60990:2002 Methods of measurement of touch current and protective conductor current
Defines methods for measuring electric currents flowing through the human body or through the protective conductor. This Standard
is identical with, and has been reproduced from, IEC 60990:1999.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 43 pages

AS/NZS 60998:- Connecting devices for low voltage circuits for household and similar purposes

60998.1:1998 General requirements


Specifies general requirements for connecting devices for the connection of two or more electrical copper conductors having a cross-
sectional area of 0.5 mm2 up to and including 35 mm2 for use at low voltages. This Standard is technically equivalent to and
reproduced from IEC 60998-1:1990.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

60998.2.1:1998 Particular requirements for connecting devices as separate entities with screw-type
clamping units
Specifies requirements for screw-type clamping units primarily suitable for connecting unprepared conductors for use at low voltage.
It is to be read in conjunction with AS/NZS 60998.1. This Standard is identical with, and reproduced from, IEC 60998-2-1:1990.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

60998.2.2:1998 Particular requirements for connecting devices as separate entities with screwless-type
clamping units
Specifies requirements for screwless-type clamping units primarily suitable for connecting unprepared conductors for use at low
voltage. It is to be read in conjunction with AS/NZS 60998.1. This Standard is identical with, and reproduced from, IEC 60998-2-
2:1991.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 13 pages

60998.2.3:1998 Particular requirements for connecting devices as separate entities with insulation piercing
clamping units
Specifies requirements for insulation piercing clamping units primarily suitable for connecting insulated unprepared conductors for
use at low voltages. It is to be read in conjunction with AS/NZS 60998.1. This Standard is technically equivalent to and reproduced
from IEC 60998-2-3:1991.
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 14 pages
Amendment 1, 2001 $29.95+GST (Members), $37.44+GST (Retail)

60998.2.4:1998 Particular requirements for twist-on connecting devices


Specifies requirements for twist-on connecting devices having a cross-sectional area of from 0.5 mm2 up to and including 16 mm2
for use at low voltages. It is to be read in conjunction with AS/NZS 60998.1. This Standard is technically equivalent to and
reproduced from IEC 60998-2-4:1993.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

AS/NZS 61000:- Electromagnetic compatibility (EMC)

61000.1:- General

61000.1.1:2000 Application and interpretation of fundamental definitions and terms


Specifies the application of fundamental terms contained in the electromagnetic emissions and immunity Standards. This Standard is
identical with and has been reproduced from IEC 61000-1-1:1992.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 26 pages

61000.2:- Environment

61000.2.2:2003 Compatibility levels for low frequency conducted disturbances and signalling in public
Specifies compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems.
This Standard is identical with and has been reproduced from IEC 61000-2-2:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 33 pages

61000.2.3:1999 Description of the environment - Radiated and non-network-frequency-related conducted


phenomena
Describes the electromagnetic environment intended as a basis to achieve electromagnetic compatibility in system and equipment
design, using test standards and mitigation methods which satisfactorily take account of undesirable effects. The Standard is
primarily concerned with characteristics and levels of electromagnetic fields and of non-network-frequency-related conducted
emissions from unintentional sources of interference. It is one of a series of Standards applicable to electromagnetic compatibility.
This Standard is identical with and has been reproduced from IEC 61000-2-3:1992.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 63 pages

61000.2.5:1999 Classification of electromagnetic environments


Provides a method of classification of electromagnetic environments. The Standard is intended to provide a basic framework upon
which other EMC considerations may be based. It is one of a series of Standards applicable to electromagnetic compatibility. This
Standard is identical with and has been reproduced from IEC 61000-2-5:1995.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 46 pages
61000.2.12:2003 Compatibility levels for low-frequency conducted disturbances and signalling in public
medium-voltage power supply systems
Specifies compatibility levels for electromagnetic disturbance phenomena which can be expected in public medium voltage a.c.
distribution systems. This Standard is identical with and has been reproduced from IEC 61000-2-12:2003.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 22 pages

61000.3:- Limits

61000.3.2:2007 Limits for harmonic current emissions (equipment input current less than or equal to 16 A
per phase)
To provide manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical
network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance
to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with modifications from IEC 61000-
3-2, Ed.3.0(2005).
Reprinted to incorporate Amendment A:2008
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
Amendment A, 2008 $29.95+GST (Members), $37.44+GST (Retail)

61000.3.3:2006 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current less than or equal to 16 A per phase and not
subject to conditional connection
Provides manufacturers and suppliers of electricity, and users of electrical equipment intended for connection to an electrical
network, with limits for voltage fluctuations and flicker produced by that equipment and the methods for ascertaining compliance to
them in order to maintain electromagnetic compatibility within the electrical network. Reproduced from IEC 61000-3-3:2005 with
national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

61000.3.4:2007 Limitation of emission of harmonic currents in low-voltage power supply systems for
equipment with rated current greater than 75 A
To provide manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical
network with limits of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater
than 75 A and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical
network. Identical to and reproduced from IEC 61000-3-4, Ed.1.0(1998).
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 20 pages

61000.3.5:1998 Limitation of voltage fluctuations and flicker in low-voltage power supply systems for
equipment with rated current greater than 16A
Specifies the limitation of voltage fluctuation and flicker in low-voltage supply systems for equipment with a rated input current
greater than 16 A. This Standard is identical with and has been reproduced from IEC 61000-3-5:1994.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 12 pages

61000.3.6:2001 Assessment of emission limits for distorting loads in MV and HV power systems
Proposes a set of principles which are intended to be used as the basis for determining the requirements for connecting large
distorting loads (producing harmonics and/or interharmonics) to public power systems. This Standard provides guidance on
engineering practices which will ensure adequate service quality for all connected consumers. It is a modified adoption of IEC
61000-3-6:1996.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 58 pages

61000.3.7:2001 Assessment of emission limits for fluctuating loads in MV and HV power systems
Proposes a set of principles which are intended to be used to determine the requirements for connecting large fluctuating loads
(producing flicker) to public power systems. This Standard provides guidance on engineering practices which will ensure service
quality for all connected consumers. It is a modified adoption of IEC 61000-3-7:1996.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

61000.3.11:2002 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems - Equipment with rated current less than or equal to 75 A and subject to
conditional connection
Specifies the limits of voltage changes, voltage fluctuations and flicker produced by electrical and electronic equipment having a
rated input current from 16 A up to and including 75 A. This equipment is intended to be connected to public low-voltage distribution
systems having nominal system voltages of between 220 V and 250 V, line-to-neutral at 50 Hz and which is subject to conditional
connection. This Standard is identical with and has been reproduced from IEC 61000-3-11:2000.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 10 pages

61000.3.12:2006 Limits for harmonic currents produced by equipment connected to public low-voltage
systems with input current greater than 16 A and less than or equal to 75 A per phase
Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network
with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance to them
in order to maintain electromagnetic compatibility within the electrical network. Identical to and reproduced from IEC 61000-3-
12:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

61000.4:- Testing and measurement techniques

61000.4.1:2006 Overview of IEC 61000-4 series


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-1:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

61000.4.2:2002 Electrostatic discharge immunity test


Establishes a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected
to electrostatic discharges. This Standard is identical with and has been reproduced from IEC 61000-4-2:2001 Ed 1.2 B.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

61000.4.3:2006 Radiated, radio-frequency, electromagnetic field immunity test


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-3:2002.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 60 pages

61000.4.4:2006 Electrical fast transient/burst immunity test


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-4:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 36 pages

61000.4.5:2006 Surge immunity test


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-5:2005.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

61000.4.6:2006 Immunity to conducted disturbances, induced by radiofrequency fields


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-6:2004.
Joint Australian/New Zealand Standard
$119.95+GST (Members), $149.94+GST (Retail), 52 pages

61000.4.7:2007 General guide on harmonics and interharmonics measurements and instrumentation, for
power supply systems and equipment connected thereto
Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network,
with testing and measurement techniques for instrumentation intended for measuring spectral components for both individual items
of equipment and the actual supply systems, in order to maintain electromagnetic compatibility within the electrical network. Identical
to and reproduced from IEC 61000-4-7, Ed. 2.0 (2002).
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 40 pages

61000.4.8:2002 Power frequency magnetic field immunity test


To determine the immunity requirements of equipment, only under operational conditions, to magnetic disturbances at power
frequency related to residential and commercial locations, industrial installations and power plants and medium voltage and high
voltage sub-stations. This Standard is identical with and has been reproduced from IEC 61000-4-8:2001.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 28 pages

61000.4.11:2005 Voltage dips, short interruptions and voltage variations immunity tests
Specifies immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage
power supply networks for voltage dips, short interruptions and voltage variations. An adoption of IEC 61000.4.11:2004 with national
modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

61000.4.13:2006 Harmonics and interharmonics including mains signalling at a.c. power port, low frequency
immunity tests
Establishes a common reference for evaluating the functional immunity of electrical and electronic equipment when subject to
harmonics and interharmonics and main signalling frequencies. Identical to and reproduced from IEC 61000-4-13:2002.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

61000.4.14:2007 Voltage fluctuation immunity test


Specifies a common reference for evaluation of the immunity of electrical and electronic equipment when subjected to positive and
negative low amplitude voltage fluctuations. Identical to and reproduced from IEC 61000-4-14 Ed. 1.1 (2002).
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

61000.4.15:2005 Flickermeter - Function and design specifications


Specifies basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. Adopted
with national modifications from IEC 61000-4-15:2003.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 32 pages

61000.4.16:2002 Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to
150 kHz
Specifies the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode
disturbances in the range d.c. to 150 kHz. Also defines test voltage and current waveform, range of test levels, test equipment, test
set-up and test procedures. The disturbances produced by 400 Hz mains systems are not included in the Standard. This Standard is
identical with and has been reproduced from IEC 61000.4.16:1998.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 20 pages

61000.4.27:2006 Unbalance, immunity test


Establishes a reference for evaluating the immunity of electrical and electronic equipment when subjected to unbalanced power
supply voltage. Identical to and reproduced from IEC 61000-4-27:2000.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 24 pages

61000.4.30:2007 Power quality measurement methods


Defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply
systems. Identical to and reproduced from IEC 61000-4-30, Ed. 1.0 (2003).
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 48 pages

61000.4.34:2007 Voltage dips, short interruptions and voltage variations immunity tests for equipment with
input current more than 16 A per phase
Defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage
power supply networks for voltage dips, short interruptions, and voltage variations. Equivalent to IEC 61000-4-34, Ed. 1.0 (2005).
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 32 pages

61000.6:- Generic standards

61000.6.1:2006 Immunity for residential, commercial and light industrial environments


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-6-1:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

61000.6.2:2006 Immunity for industrial environments


Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-6-2:2005.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

61000.6.3:2007 Emission standard for residential, commercial and light-industrial environments


Provides designers, manufacturers and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages

61000.6.4:2007 Emission standard for industrial environments


Provides designers, manufacturers and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances.
Joint Australian/New Zealand Standard
$54.95+GST (Members), $68.69+GST (Retail), 16 pages

AS/NZS 61008:- Residual current operated circuit-breakers without integral overcurrent protection for
household and similar uses (RCCBs)

61008.1:2004 General rules


Proposes essential safety and associated requirements for residual current operated circuit-breakers for household and similar uses,
not incorporating overcurrent protection, for rated voltages not exceeding 440 V a.c. and rated currents not exceeding 125 A. Annex
ZZ lists variations for Australian and New Zealand conditions. A modified adoption of IEC 61008-1:2002.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 112 pages

AS/NZS 61009:- Residual current operated circuit-breakers with integral overcurrent protection for
household and similar uses (RCBOs)

61009.1:2004 General rules


Provides essential safety and associated requirements for residual current operated circuit-breakers with integral overcurrent
protection for household and similar uses, for rated voltages not exceeding 440 V a.c. and rated currents not exceeding 125 A and
short-circuit capacities not exceeding 25,000 A for operation of 50 Hz or 60 Hz. Annex ZZ lists variations for Australian and New
Zealand conditions. A modified adoption of IEC 61009-1:2003.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 124 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

AS/NZS 61046:2001 Auxiliaries for lamps - D.C. or A.C. supplied electronic step-down convertors for filament
lamps - General and safety requirements
Provides the lighting industry with general and safety requirements for electronic step-down convertors for use on D.C. supplies up to
250 V or A.C. supplies up to 1000 V for use with tungsten-halogen or other filament lamps. It also stipulates the particular
requirements for convertors with means of protection against overheating and provides additional requirements for independent
SELV D.C. or A.C. supplied electronic step-down convertors. This Standard is an adoption with national modifications of IEC
61046:1993 including Amendment 1:1995.
Superseded by AS/NZS 61347.2.2:2004 but remains current until 30 December 2006
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 45 pages

AS/NZS 61047:2001 Auxiliaries for lamps - D.C. or a.c. supplied electronic step-down convertors for filament
lamps - Performance requirements
Provides the lighting industry with performance requirements at 50 or 60 Hz for electronic step-down convertors for use on D.C.
supplies up to 250 V or a.c. supplies up to 1000 V with tungsten-halogen or other filament lamps.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 12 pages
AS/NZS 61048:2002 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp
circuits - General and safety requirements
Specifies the general and safety requirement for capacitors up to 2.5 kVAR having a rated voltage up to 1000 V intended for
discharge lamp circuits operating at 50/60 Hz. This Standard is reproduced from IEC 61048 and varied for Australian/New Zealand
conditions.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 30 pages

AS/NZS 61049:2002 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp
circuits - Performance requirements
Specifies performance requirements for capacitors up to 2.5 kVAR rated up to 1000 V a.c. intended for use in discharge lamp circuits
at 50/60 Hz. This Standard is identical with and reproduced from IEC 61049.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 9 pages

AS/NZS 61050:1998 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000
V (generally called neon-transformers) - General and safety requirements
Specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c.
supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10 000 V and intended
for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes.
Joint Australian/New Zealand Standard
$64.95+GST (Members), $81.19+GST (Retail), 34 pages

AS/NZS 61058 Switches for appliances

AS/NZS 61058.1:2008 General requirements


Applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or
control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a
rated current not exceeding 63 A. Adopted with national modifications from IEC 61058-1, Ed. 3.1 (2000).
Joint Australian/New Zealand Standard
$169.95+GST (Members), $212.44+GST (Retail), 156 pages

AS/NZS 61097 Global maritime distress and safety system (GMDSS)

AS/NZS 61097.12:2008 Survival craft portable two-way VHF radiotelephone apparatus - Operational and
performance requirements, methods of testing and required test results
Specifies the minimum performance requires, technical characteristics and methods of testing, with required test results, of survival
craft portable two way radiotelephone apparatus as required by chapter III of the 1988 amendments to the 1974 International
Convention for the Safety of Life at Sea (SOLAS). Adopted from IEC 61097-12, Ed. 1.0 (1996) with modifications.
Joint Australian/New Zealand Standard
$99.95+GST (Members), $124.94+GST (Retail), 40 pages

AS/NZS 61184:2007 Bayonet lampholders


Provides general and safety requirements for bayonet lampholders used for general purposes. Based on IEC 61184, Ed. 2.0 (1997)
with national modifications.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 64 pages

AS/NZS 61210:2002 Connecting devices - Flat quick-connect terminations for electrical copper conductors -
Safety requirements
Specifies requirements for flat quick-connect terminations consisting of a male tab size 2.8, 4.8, 6.3 or 9.5 mm and mating female
connector for use as either an incorporated or an integrated part of an equipment or of a component, or as a separate entity, for
connecting electrical copper conductors according to the manufacturer's instructions.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 20 pages
AS/NZS 61231:2001 International lamp coding system (ILCOS)
Specifies international lamp coding system (ILCOS) technical specifications to manufacturers, suppliers, consumers and regulators.
This document is identical to IEC TS 61231:1996 and is reproduced from it.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

AS/NZS 61241:- Electrical apparatus for use in the presence of combustible dust

61241.0:2005 General requirements


Specifies general requirements for the design, construction, testing and marking of electrical apparatus protected by any recognized
safeguard technique for use in areas where combustible dust may be present in quantities that could lead to a fire or explosion
hazard. This Standard is identical with and has been reproduced from IEC 61241-0:2004.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 52 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)

61241.1:2005 Protection by enclosures 'tD'


Specifies requirements for design, construction and testing of electrical apparatus protected by enclosures and surface temperature
limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. This
Standard supplements the general requirements in AS/NZS 61241.0. It is identical with and has been reproduced from IEC 61241-
1:2004.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 32 pages

61241.1.1:1999 (Superseded by AS/NZS 61241.0:2005 and AS/NZS 61241.1:2005)

61241.1.2:2000 (Superseded by AS/NZS 61241.14:2005)

61241.2:- Test methods

61241.2.1:2000 Methods for determining the minimum ignition temperature of dust


Specifies two test methods for determining the minimum ignition temperatures of dust. This Standard is identical with and has been
reproduced from IEC 61241-2-1:1994.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 25 pages

61241.2.2:2000 Methods for determining the electrical resistivity of dust in layers


Specifies a test method to determine, by application of a d.c. voltage, the electrical resistivity of a layer of dust. Is to be used in the
design, construction, testing and application of electrical apparatus for use in the presence of combustible dust. This Standard is
identical with and has been reproduced from IEC 61241-2-2:1993.
Joint Australian/New Zealand Standard
$39.95+GST (Members), $49.94+GST (Retail), 4 pages

61241.2.3:2000 Methods for determining the minimum ignition energy of dust/air mixtures
Specifies a method of test to determine the minimum ignition energy of a dust/air mixture by an electrically generated high-voltage
d.c. spark. This test method is intended to develop data to be used in deciding whether or not combustible dust/air mixtures are
considered to be ignitable with respect to electrical discharge. This Standard is identical with and has been reproduced from IEC
61241-2-3:1994.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 17 pages

61241.3:1999 (Superseded by AS/NZS 61241.10:2005)

61241.4:2002 Type of protection 'pD'


Specifies the requirements for design, construction, testing and marking of electrical apparatus, with type of protection pressurization
'pD', intended for use in combustible dust atmospheres. This Standard is identical with and has been reproduced from IEC 61241-
4:2001.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 19 pages

61241.10:2005 Classification of areas where combustible dusts are or may be present


Provides classification of areas where explosive dust/air mixtures and combustible dust layers are present, in order to permit the
proper selection of equipment for use in such areas. This Standard is identical with and has been reproduced from IEC 61241-
10:2004.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages
Amendment 1, 2007 $29.95+GST (Members), $37.44+GST (Retail)

61241.11:2006 Intrinsically safe apparatus ‘iD’


Sets out the essential requirements for explosion-protected electrical apparatus for use in dust hazardous areas, when using the
protection technique intrinsic safety 'iD'. Identical to and reproduced from IEC 61241-11:2005.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 20 pages

61241.14:2005 Selection and installation


Specifies general requirements, additional to those required for basic electrical safety, for the selection of electrical apparatus and
instruments and associated equipment, and for the installation of electrical apparatus to ensure safe use in areas where combustible
dust may be present in quantities which could lead to a fire or explosion hazard. The application of electrical apparatus in
atmospheres which may contain explosive gas as well as combustible dust, whether simultaneously or separately, requires
additional protective measures. Reproduced with modifications from IEC 61241-14:2004.
Reprinted to incorporate Amendments 1 to 5
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 72 pages
Amendment 1, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 2, 2005 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 3, 2006 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 4, 2007 $29.95+GST (Members), $37.44+GST (Retail)
Amendment 5, 2007 $29.95+GST (Members), $37.44+GST (Retail)

61241.18:2005 Protection by encapsulation 'mD'


Specifies requirements for design, construction and testing of electrical apparatus, parts of electrical apparatus and Ex components
where the rated voltage does not exceed 10 kV. This Standard applies to electrical apparatus protected by encapsulation type of
protection 'mD' and surface temperature limitation for use in areas where combustible dust may be present in quantities which could
lead to a fire or explosion hazard. This Standard is to be read in conjunction with AS/NZS 61241.0, the requirements of which apply
to electrical apparatus protected by encapsulation and surface temperature limitation unless specifically excluded. This Standard is
identical with and has been reproduced from IEC 61241-18:2004.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 32 pages

AS/NZS 61347:- Lamp controlgear

61347.1:2002 General and safety requirements


Specifies electrical safety requirements for lamp controlgear for use in d.c. supplies up to 250 V and a.c. supplies up to 1000 V. This
Standard is reproduced from IEC 61347-1:2000 and varied to suit Australian/New Zealand conditions.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 50 pages

61347.2.1:2002 Particular requirements for starting devices (other than glow starters)
Specifies safety requirements for starting devices for fluorescent and other discharge lamps for use on a.c. supplies up to 1000 V at
50/60 Hz in combination with lamps and ballasts. This Standard is identical to and reproduced from IEC 61347-2-1:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

61347.2.2:2007 Particular requirements for d.c. or a.c. supplied electronic step-down convertors for
filament lamps
Specifies particular safety requirements for electronic stepdown convertors associated with tungsten-halogen lamps and other
filament lamps. Based on IEC 61347-2-2, Ed. 1.2 (2006) with national modifications.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 40 pages

61347.2.3:2004 Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
Specifies particular safety requirements for electronic ballast associated with fluorescent lamps as specified in AS/NZS 4782.1,
AS/NZS 60901, and other fluorescent lamps for high-frequency operation. Modified adoption of IEC 61347-2-2:2000.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

61347.2.4:2002 Particular requirements for d.c. supplied electronic ballasts for general lighting
Specifies safety requirements for d.c. supplied electronic ballasts for operation from surge-free power sources from batteries without
charging equipment. This Standard is identical to and reproduced from IEC 61347-2-4:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 6 pages

61347.2.5:2002 Particular requirements for d.c. supplied electronic ballasts for public transport
Specifies electrical safety requirements for road and railway vehicles, tram cars and craft used for public transport. This Standard is
identical to and reproduced from IEC 61347-2-5:2000.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 9 pages

61347.2.6:2002 Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
Specifies safety requirements for d.c. supplied electronic ballasts intended for operation from power sources with transients and
surges such as aircraft. This Standard is identical to and reproduced from IEC 61347-2-6:2000.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 9 pages

61347.2.8:2003 Particular requirements for ballasts for fluorescent lamps


Specifies safety requirements for ballasts excluding resistance types and used in a.c. supplies up to 1000 V. This Standard is
reproduced from IEC 61347-2-8:2000 and varied to suit national requirements.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

61347.2.9:2004 Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
Specifies particular safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium
vapour, high-pressure sodium vapour and metal halide lamps. Modified adoption of IEC 61347-2-9:2000 including Amendment
1:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 16 pages

61347.2.10:2004 Particular requirements for electronic invertors and convertors for high-frequency
operation of cold start tubular discharge lamps (neon tubes)
Specifies particular safety requirements for electronic invertors and convertors for high-frequency operation of tubular cold-cathode
discharge lamps used in signs and luminous discharge tube installations. Modified adoption of IEC 61347-2-10:2000 including
Amendment 1:2003.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 15 pages

61347.2.11:2003 Particular requirements for miscellaneous electronic circuits used with luminaires
Specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to
1000 V and d.c. supply up to 250 V. This Standard is reproduced from IEC 61347-2-11 and varied to suit national requirements.
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 13 pages

AS/NZS 61459:2000 Low-voltage fuses - Coordination between fuses and contactors/motor-starters -


Application guide
Provides guidance to assist in selecting a fuse-link to ensure coordination with contactors or motor-starters (contactors with overload
relay). This Standard is identical with and is reproduced from IEC 61459:1996.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 14 pages

AS/NZS 61534 Powertrack systems

61534.1:2008 General requirements


Specifies general requirements and tests for powertrack (PT) systems with a rated voltage not exceeding 277 V a.c. single phase, or
480 V a.c. two or three phase 50 Hz/60 Hz, with a rated current not exceeding 63 A. These systems are used for distributing
electricity in household, commercial and industrial premises. Reproduced from IEC 61534-1 ED 1.0 (2003) with national
modifications.
Joint Australian/New Zealand Standard
$109.95+GST (Members), $137.44+GST (Retail), 68 pages
AS/NZS 61535 Installation couplers

61535.1:2003 General requirements


This Standard applies to installation couplers with two- to five- poles with or without earthing contact and with a rated voltage up to
and including 500 V a.c. and a rated current up to and including 32 A for permanent connection in indoor installation systems
according to AS/NZS 3000.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 44 pages

AS/NZS 61558:- Safety of power transformers, power supply units and similar

61558.1:2008 General requirements and tests


Deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and
mechanical safety. Reproduced with national modifications from IEC 61558-1 Ed.2.0.
Will supersede AS/NZS 61558.1:2000 three years from publication of the relevant Part 2. During this period it is anticipated that
regulatory authorities will approve power transformers and power supplies to the relevant Part 2 using either edition of Part 1.
Joint Australian/New Zealand Standard
$239.95+GST (Members), $299.94+GST (Retail), 163 pages

61558.2:- Particular requirements

61558.2.3:2001 Ignition transformers for gas and oil burners


Specifies general safety requirements for approval and test purposes for ignition transformers for gas and oil burners. This Standard
is an adoption with national modifications and contains the full text of IEC 61558-2-3:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 23 pages

61558.2.4:2001 Isolating transformers for general use


Specifies general safety requirements for approval and test purposes for isolating transformers for general use. This Standard is an
adoption with national modifications and contains the full text of IEC 61558-2-4:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

61558.2.5:2003 Shaver transformers


Specifies general safety requirements for approval and test purposes for shaver transformers. This Standard is an adoption with
national modifications and contains the full text of IEC 61558-2-5:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 18 pages

61558.2.6:2001 Safety isolating transformers for general use


Specifies safety requirements for approval and test purposes for safety isolating transformers. This Standard is an adoption with
national modifications and contains the full text of IEC 61558-2-6:1997.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$34.95+GST (Members), $43.69+GST (Retail), 9 pages
Amendment 1, 2006 $29.95+GST (Members), $37.44+GST (Retail)

61558.2.7:2001 Transformers for toys


Specifies general safety requirements for approval and test purposes for transformers for toys. This Standard is an adoption with
national modifications and contains the full text of IEC 61558-2-7:1997.
Will be superseded by AS/NZS 61558.2.7:2008 on 31 October 2010
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 23 pages

61558.2.7:2008 Particular requirements for transformers and power supplies for toys
Deals with safety aspects of transformers for toys and power supplies incorporating transformers for toys such as electrical, thermal
and mechanical safety.
This Standard will supersede AS/NZS 61558.2.7:2001 on 31 October 2010
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 23 pages

61558.2.8:2001 Bell and chime transformers


Specifies general safety requirements for approval and test purposes for bell and chime transformers. This Standard is an adoption
with national modifications and contains the full text of IEC 61558-2-8:1998.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

61558.2.9:2003 Particular requirements for transformers for class III handlamps for tungsten filament
lamps
Specifies general safety requirements for approval and test purposes for transformers for class III handlamps for tungsten filament
lamps. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-9:2002.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 16 pages

61558.2.15:2001 Isolating transformers for the supply of medical locations


Specifies general safety requirements for approval and test purposes for isolating transformers for the supply of medical locations.
This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-15:1999.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 21 pages

61558.2.17:2001 Transformers for switch mode power supplies


Specifies general safety requirements for approval and test purposes for transformers for switch mode power supplies. This
Standard is an adoption with national modifications and contains the full text of IEC 61558-2-17:1997.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 17 pages

61558.2.23:2001 Transformers for construction sites


Specifies general safety requirements for approval and test purposes for transformers for construction sites. This Standard is an
adoption with national modifications and contains the full text of IEC 61558-2-23:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 25 pages

AS/NZS 61779.1:2000 (Superseded by AS/NZS 60079.29.1:2008)

AS/NZS 61779.2:2000 (Superseded by AS/NZS 60079.29.1:2008)

AS/NZS 61779.3:2000 (Superseded by AS/NZS 60079.29.1:2008)

AS/NZS 61779.4:2000 (Superseded by AS/NZS 60079.29.1:2008)

AS/NZS 61779.5:2000 (Superseded by AS/NZS 60079.29.1:2008)

AS/NZS 61779.6:2000 (Superseded by AS/NZS 60079..29.2:2008)

AS/NZS IEC 61935 Testing of balanced communication cabling in accordance with ISO/IEC 11801

61935.1:2006 Installed cabling


Provides specific reference measurement procedures for cabling parameters and the requirements for field tester accuracy to
measure cabling parameters identified in ISO/IEC 11801 which has been adopted as AS/NZS 3080. Identical to and reproduced
from IEC 61935.1:2005.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 80 pages

61935.2:2006 Patch cords and work area cords


Provides users with methods to ensure the compatibility of modular plug cords to be used in cabling according to ISO/IEC 1180,
which has been adopted as AS/NZS 3080, and provide test methods and associated requirements to demonstrate the performance
and reliability of these cords during their operational lifetime. Identical to and reproduced from IEC 61935.2:2005.
Joint Australian/New Zealand Standard
$74.95+GST (Members), $93.69+GST (Retail), 28 pages
AS/NZS 62013:- Caplights for use in mines susceptible to firedamp

62013.1:2001 General requirements - Construction and testing in relation to the risk of explosion
Specifies the requirements for the construction and testing of caplights for use in mines susceptible to firedamp or which have
become temporarily endangered by the explosive atmosphere of firedamp. It deals with the risk of the caplight becoming a source of
ignition. This Standard is identical to and has been reproduced from IEC 62013-1:1999.
Joint Australian/New Zealand Standard
$49.95+GST (Members), $62.44+GST (Retail), 15 pages

62013.2:2001 Performance and other safety-related matters


Details those performance and other safety features of caplights for use in mines susceptible to firedamp that are not covered in
AS/NZS 62013.1 but which are nevertheless important for the safety and working conditions of the user. It may be applied for use in
mines not likely to be endangered by firedamp. This Standard is identical to and has been reproduced from IEC 62013-2:2001.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 9 pages

AS/NZS 62026:- Low-voltage switchgear and controlgear - Controller-device interface (CDIs)

62026.1:2001 General rules


The objective of this standard is to harmonize and define rules, components and requirements of a general nature applicable to
industrial controller-device interfaces (CDIs). Applies to interfaces between low-voltage switchgear, controlgear and controllers
including industrial CDIs for control system, factory and process automation. This Standard is identical with and has been
reproduced from IEC 62026-1:2000.
Joint Australian/New Zealand Standard
$44.95+GST (Members), $56.19+GST (Retail), 8 pages

62026.2:2001 Actuator sensor interface


Applies to interfaces between low-voltage switchgear and controlgear switching elements and controllers, including industrial CDIs
for control systems, factory and process automation. Specifies requirements for a bit-oriented interface-system between a single-
control circuit device and switching elements connected by a non-shielded, entwisted two-wire cable carrying data and power, and
establishes a system for the interchangeability of components with such interfaces. This Standard is identical with and has been
reproduced from IEC 62026-2:2000.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 78 pages

62026.3:2001 DeviceNet
Applies to interfaces between low-voltage switchgear and controlgear and controllers, including industrial CDIs for control systems,
factory and process automation. Specifies an interface system between a single controller or multiple controllers, and control circuit
devices or switching elements and establishes requirements for the interchangeability of components with such interfaces. This
Standard is identical with and has been reproduced from IEC 62026-3:2000.
Joint Australian/New Zealand Standard
$159.95+GST (Members), $199.94+GST (Retail), 134 pages

62026.5:2001 Smart distributed system (SDS)


Applies to interfaces between low-voltage switchgear and controlgear and controllers including industrial CDIs for control systems,
factory and process automation. Specifies an interface system between a single or multiple controlling device and control circuit
devices or switching elements and establishes a system for the interchangeability of components with such interfaces. This Standard
is identical with and has been reproduced from IEC 62026-5:2000.
Joint Australian/New Zealand Standard
$94.95+GST (Members), $118.69+GST (Retail), 50 pages

62026.6:2002 Seriplex (Serial multiplexed control bus)


Specifies requirements, in addition to those of AS/NZS 62026.1:2001, for interface systems between single or multiple controllers
and control circuit devices and switching elements. Establishes requirements for the interchangeability of components of such
interfaces. This Standard is identical with and has been reproduced from IEC 62026-6:2001.
Joint Australian/New Zealand Standard
$129.95+GST (Members), $162.44+GST (Retail), 76 pages

AS/NZS 62086.1:2002 (Superseded by AS/NZS 60079.30.1:2007)

AS/NZS 62086.2:2002 (Superseded by AS/NZS 60079.30.2:2007)


AS/NZS 62087 Power consumption of audio, video and related equipment

AS/NZS 62087:2004 Methods of measurement for the power consumption of audio, video and related
equipment
This International Standard specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes
(STBs), audio equipment and multi-function equipment for consumer use. Moreover the different modes of operation which are
relevant for the power consumption are defined. The methods of measurement are only applicable for equipment which can be
connected to the mains. The measuring conditions in this standard represent the normal use of the equipment and may differ from
specific conditions, for example as specified in safety standards. Identical to and reproduced from IEC 62087:2002.
Joint Australian/New Zealand Standard
$59.95+GST (Members), $74.94+GST (Retail), 11 pages

AS/NZS 62087.2.1:2008 Minimum energy performance standards (MEPS) requirements for digital television set-top
boxes
Provides designers, manufacturers, importers, test laboratories, regulators and users of digital television set-top boxes with the
minimum energy performance standards (MEPS) requirements for these devices.
Joint Australian/New Zealand Standard
$69.95+GST (Members), $87.44+GST (Retail), 28 pages

AS/NZS 62115:2008 Electric toys - Safety


Deals with the safety of toys that have at least one function dependent on electricity. Examples of toys within the scope of this
standard are constructional sets; experimental sets; functional toys (having a function similar to an appliance or installation used by
adults) and video toys (toys having a screen and means of activation, such as a joystick or keyboard. Separate screens having a
rated voltage of more than 24 v are not considered to be part of the toy). Toys using electricity for secondary functions are also within
the scope of this standard (a dolls house having an interior lamp is an example of such a toy). Identical to and reproduced from IEC
62115 Ed.1.1.
Joint Australian/New Zealand Standard
$189.95+GST (Members), $237.44+GST (Retail), 43 pages

AS/NZS IEC 62287 Maritime navigation and radiocommunication equipment and systems - Class B shipborne
equipment of the automatic identification system (AIS)

62287.1:2007 Carrier-sense time division multiple access (CSTDMA) techniques


Provides specifications for carriage of Automatic Ship Identification System (AIS) on vessels on international voyages (300 gross
tonnes and over) and on domestic voyages (500 gross tonnes and over) by SOLAS V/19.2.4. Identical to IEC 62287-1:2006.
Joint Australian/New Zealand Standard
$149.95+GST (Members), $187.44+GST (Retail), 20 pages

AS/NZS 62301:2005 Household electrical appliances - Measurement of standby power


Specifies methods of measurement of electrical power consumption in standby mode. It is applicable to mains powered electrical
household appliances and equipment and to the mains powered parts of appliances or equipment that use other fuels such as gas or
oil. Adopted from IEC 62301:2005 with national modifications.
Joint Australian/New Zealand Standard
$84.95+GST (Members), $106.19+GST (Retail), 28 pages

AS/NZS ISO/IEC 90003:2007 Software engineering - Guidelines for the application of AS/NZS ISO 9001:2000 to computer
software
Provides guidance in the application of ISO 9001:2000 (Quality management systems - Requirements) in relation to complex
software. Identical to ISO/IEC 90003:2004.
Joint Australian/New Zealand Standard
$139.95+GST (Members), $174.94+GST (Retail), 64 pages

NZMP 420400:1973 (Withdrawn)

NZMP 420500:1973 (Withdrawn)


New Zealand Standards Catalogue Index
March 2009

A
ATV helmets, NZS 8600
Abbreviations
explanation of, see introductory pages
in Standards work, NZMP 8201
Abrasive products
bonded, AS/NZS 4518, AS/NZS 4523, AS/NZS 4524, 4820
coated, AS/NZS 4528, AS/NZS 4529, AS/NZS 4530, AS/NZS 4533
grains
- analysis, AS/NZS 4616
- sampling and splitting, AS/NZS 4520
- sizes, AS/NZS 4518
- test-sieving, AS/NZS 4521
sheets, AS/NZS 4527
wheels, AS/NZS 4516, AS/NZS 4524
Abstract Syntax Notation One (ASN.1)
basic encoding rules, AS/NZS 8825
specification, AS/NZS 8824
Access and mobility
tactile ground surface indicators, AS/NZS 1428.4
Accessibility of buildings, NZS 4121
Accident & medical clinics, NZS 8151
Accommodation for substations, NZS 6108
Acoustic equipment
hearing protectors, AS/NZS 1270, AS/NZS 1269.3
instrumentation for audiometry, AS/NZS 1591
Acoustic insulating materials, lightweight concrete, NZS 3152
Acoustic measurement
musical pitch, NZS/ISO 16
octave-band filters, AS/NZS 4476
personal sound exposure, AS/NZS 2399
reverberation time in rooms AS/NZS 2460
single impulses & series impulses, AS/NZS 3817
sound insulation in buildings, AS/NZS ISO 140, AS/NZS ISO 717
Acoustics
assessment & measurement of sound from wind turbines, NZS 6808
recommended design sound levels AS/NZS 2107
Acquisitions applications, bibliographic, AS/NZS 4450.2
Adhesive tape
packaging, AS/NZS 1599
pressure sensitive, AS/NZS 1635
Adhesives
for plywood and LVL, AS/NZS 2754
phenolic & aminoplastic, for loadbearing timber, AS/NZS 4364(Int)
Advertising signs, model bylaw, NZS 9201.8
Aerials (see Antennae)
Aeronautical radio equipment, AS/NZS 4583
Aged-care, indicators for, SNZ HB 8163
Aggregates
for concrete, NZS 3121
- testing, NZS 3111
road, sampling and testing, NZS 4407
Agrichemicals, management of, NZS 8409
Agricultural tractors (see Tractors)
Air admittance valves
sanitary plumbing & drainage systems, AS/NZS 4936
Air and water systems, in buildings, NZS 4302
Air break switches, AS/NZS 3133
Air-cleaning appliances, AS/NZS 3350.2.65, AS/NZS 60335.2.65
Air conditioners, refrigerated room, AS/NZS 3350.2.40, AS/NZS 3823, AS/NZS 60335.2.40
Air-conditioning systems
microbial growth control, SAA/SNZ HB 32, AS/NZS 3666
performance of, AS/NZS 4965
Air quality, acceptable indoor, ventilation for, NZS 4303
fire and smoke control, AS/NZS 1668
Airport noise management, NZS 6805
Alarms
fire, NZS 4512
intruder systems, NZS/AS 2201, AS/NZS 3749, NZS 4301
smoke, interconnected, NZS 4514
Alcohol, treatment, NZS 8157
Alkaline cleaners (see Cleaning materials)
Allophane in soils, test, NZS 4402.3.4
All-terrain vehicle helmets, NZS 8600, AS/NZS 1698
Aluminium
ladders, AS/NZS 1892
windows, NZS 3504
Aluminium & alloys
anodized coatings for architectural applications, NZS/AS 1231
drawn
- tubes, AS/NZS 1867
- wire, rod, bar, strip, AS/NZS 1865
extruded
- rod, bar, shapes, AS/NZS 1866
plate, AS/NZS 1734
sheet, AS/NZS 1734
Aluminium structures, AS/NZS 1664
welding, AS/NZS 1665
Ambient air, AS/NZS 3580
Ambulance
restraint systems, AS/NZS 4535
sector, NZS 8156, SNZ HB 8156
service assessment, SNZ HB 8156
stretchers, NZS 1057
Ammonia, anhydrous, storage & handling, AS/NZS 2022
Anaesthetic
machines, non electrical, AS/NZS 4059
workstations, AS/NZS 3200.2.13
Anchorages, prestressing, AS/NZS 1314
Anger type gamma cameras, AS/NZS 4378
Animal
feeds, AS/NZS 1766.2.16
offal treatment units, NZS 5102
skins (see Hides)
stunning machines, AS/NZS 60335.2.87
Animals
heating equipment, for breeding & rearing, AS/NZS 60335.2.71
keeping in towns, model bylaw, NZS 9201.13
Antennae, radio and television, NZS 6603
Antistatic code, AS/NZS 1020
Apartment buildings, hostels, model bylaw, NZS 9201.3
Apnoea monitors for domestic use, AS/NZS 3200.2.202
Appliances & accessories, electrical, AS/NZS 3350
couplers, AS/NZS 60320
marking, AS/NZS 4417
measurement of standby power, AS/NZS 62301
switches, AS/NZS 61058
Aquarium equipment, electrically operated, AS/NZS 3350.2.41, AS/NZS 3350.2.55, AS/NZS 60335.2.41, AS/NZS 60335.2.45
Arc welding (see Welding)
Architectural
drawing practice, NZS/AS 1100
quality, AS/NZS 3905.12
Articulated vehicles, coupling devices
fifth wheel assemblies, NZS 5450, AS/NZS 4968
fifth wheel kingpins, NZS 5451, AS/NZS 4968
Asphalt, sampling and testing, AS/NZS 2891
Assembly facilities, fire precautions, NZS 9232
Atrium buildings, fire safety, NZS 4238
Attributes, sampling procedures
tables for inspection, AS 1199
- guide, AS 1399
Audio electronic apparatus, AS/NZS 60065
power consumption, AS/NZS 62087
Audiometry instrumentation, AS/NZS 1591
Audio-visual objects, IT coding, AS/NZS 14496
Auditing systems, quality, guidelines, AS/NZS 19011
Automatic doors, NZS 4239
Automotive
biodiesel, NZS 7500
brake testing equipment, AS/NZS 4613
gas cylinders, NZS 5454, AS/NZS 3509
immobilizers, AS/NZS 4601
security, AS/NZS 4601
suppliers quality system, SAA/SNZ HB 193
windscreen repair, NZS, AS/NZS 2366
Auxiliaries for lamps, AS/NZS 60927, AS/NZS 61046, AS/NZS 61047, AS/NZS 61048, AS/NZS 61049
Aviation, high visibility garments, PAS 10
Axilla crutches. NZS 5831

Baby carriages (see Prams & pushchairs)


Backfill (see Fill)
Bags, polyethylene, for refuse, NZS 7603
Ballasts, tubular fluorescent lamps, AS/NZS 60921, AS/NZS 60925, AS/NZS 60929, AS/NZS 61347
Barbecues, electrical, outdoor, AS/NZS 3350.2.78, AS/NZS 60335.2.78
Barrier systems, road, AS/NZS 3845
Baths, domestic, AS/NZS 2023
Batteries
lead-acid, NZS 6102
valve regulated, AS/NZS 4029.2
Battery chargers, AS/NZS 3350.2.29, AS/NZS 60335.2.29
lead-acid batteries, domestic type AS/NZS 2401
Bayonet lamp caps, holders, AS/NZS 3117, AS/NZS 61184
Beacons, satellite, distress, AS/NZS 4280, AS/NZS 4869
Beauty therapy equipment, AS/NZS 3130
Bedding, care labelling, AS/NZS 1957
Beds
bunk, AS/NZS 4220
hospital, NZS 7121, NZS 7122
Bedwetting, conditioning equipment, AS/NZS 2394
Bee-keeping, model bylaw, NZS 9201.13
Belts and harness (see also Safety belts & harnesses and Seat belts)
webbing for, AS/NZS 4475, NZS 5432/AS 1753
Benchmarking, implementation, SAA/SNZ HB 80
Bibliographic
data element directory, AS/NZS 4450
format for information exchange, AS/NZS 2619
Bicycles, pedal
child carrier seats for, AS/NZS 4287
lighting and retroreflectors, NZS 5441
normal road use, safety, AS/NZS 1927
Biodiesel, automotive, NZS 7500
Biogas, production & use, NZS 5228
Biological safety cabinets, AS/NZS 2647
Bitumen
methods of testing, AS/NZS 2341
paint, AS/NZS 2341, AS/NZS 3750
Blankets
electric, AS/NZS 3350.2.17, AS/NZS 60335.2.17
fire, AS/NZS 3504
Blocks (building)
block paving, NZS 3116
buildings not requiring specific design, NZS 4229
concrete masonry, AS/NZS 4455
- methods of test, AS/NZS 4456
masonry construction, NZS 4210, AS/NZS 2699
segmental pavers, AS/NZS 4455
- methods of test, AS/NZS 4456
structural design, NZS 4230
Blocks (paving), interlocking concrete, NZS 3116
Blood pressure
direct monitoring equipment, AS/NZS 3200.2.34
indirect monitoring equipment, AS/NZS 3200.2.30
Boarding houses, hostels, model bylaw, NZS 9201.3
Boards (see also Plywood)
decorative, AS/NZS 1859.3
dimensional co-ordination, NZS 4207
gypsum plasterboard, AS/NZS 2588, AS/NZS 2589
insulating, AS/NZS 1859.5
particleboard, AS/NZS 1860
Boats
LPG use, NZS 5428
- self-containment, NZS 5465
Bolts
BS Whitworth, AS/NZS 2451
cup head, metric, AS/NZS 1390
high strength steel, AS/NZS 1252
structural, AS/NZS 1252
tower, AS/NZS 1559
unified hexagon, AS/NZS 2465
Whitworth, AS/NZS 2451
Book numbers, ISBN, AS/NZS 1519
Book orders reporting, AS/NZS 2807
Boots (see Footwear)
Brake fluids, AS/NZS 1960
Brake hose
air, NZS/SAE J1402
hydraulic, NZS/SAE J1401
vacuum, NZS/SAE J1403
Brazing & welding, filler metal, AS/NZS 1167
Breathing apparatus
medical, AS/NZS 2496
self-contained, compressed air, AS/NZS 1716
- selection, use & maintenance, AS/NZS 1715
Breathing tubes, anaesthetic, ISO 5367
Bricks, clay building
masonry construction, NZS 4210, AS/NZS 2699
Broadcast teletext, NZS 6606
Builders' hardware, door lock & latch, NZS/BS 5872
Builders' mix, NZS 3121
tests, NZS 3111
Building
boards, AS/NZS 1859
- flat sheet sizes, NZS 4207
bricks (see Bricks)
cabling, AS/NZS 3080, AS/NZS 3085
concrete construction, NZS 3109, NZMP 3100
construction industry
- quality system guidelines, AS/NZS 3905
contracts, NZS 3902, NZS 3910, NZS 3915
design
- access by disabled persons, NZS 4121
- loadings, NZS 4203, AS/NZS 1170
- reinforced concrete, NZS 3101
- steel structures, NZS 3404, AS/NZS 4600
earth building, NZS 4297, NZS 4298, NZS 4299
erection of steelwork, SAA/SNZ HB 62
façades, testing, AS/NZS 4284
fire-resistance tests, NZS/ISO 834
glossary of terminology, NZMP 4212
gypsum plaster, AS 2592, AS/NZS 2588, AS/NZS 2589
masonry code, NZS 4210, AS/NZS 2699
materials (see also specific items)
- sheet materials, sizes, NZS 4207
- metric, NZS 4202
membranes and underlays, NZS 2295, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
noise, NZS 6803
panels
- reconstituted wood-based, AS/NZS 4266
- wood-based, AS/NZS 1859
papers, NZS 2295, AS/NZS 4200, AS/NZS 4201
sound insulation, AS/NZS ISO 717
specifying timber and wood based products, NZS 3602
technical information, guidelines, AS/NZS 1388
thermal insulation, NZS 4222, NZS 4218, SNZ PAS 4244
- installation of, in residential buildings, NZS 4246
- urea-formaldehyde (UF) foam systems, NZS 4235
thermal resistance determination, NZS 4214
timber frames (light), NZS 3604
timber piles and poles, NZS 3605
waterproofing, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
Building & civil engineering drawing practice, NZS 5902
Building blocks (see Blocks, building)
Building papers, breather type, NZS 2295, AS/NZS 4200, AS/NZS 4201
Buildings
air and water systems, NZS 4302
- microbial control, AS/NZS 3666
atrium, fire safety, NZS 4238
concrete masonry, NZS 4229
glazing, NZS 4223 , AS/NZS 2208
membranes and underlays, NZS 2295, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
painting of, AS/NZS 2311
seismic resistance of engineering systems, NZS 4219
seismic restraint of building contents, NZS 4104
timber design, NZS 3603
Bullet-resistant panels and elements, AS/NZS 2343
Bungy jumping, AS/NZS 5848
Bunk beds, AS/NZS 4220
Buoyancy aids and marine safety harnesses and lines, NZS 5823
Burglar alarms, NZS 4301
Buried corrugated metal structures, AS/NZS 2041
Buried pipelines, flexible, AS/NZS 2566
Bushings, insulated for alternating voltages above 1000 V, AS/NZS 60137
Business continuity management, SAA/SNZ HB 221
Business equipment, electrical, safety, AS/NZS 60950
Butter, AS/NZS 1766.3.14
Bylaws (see Model bylaws)

Cabinets
biological safety, AS/NZS 2647
refrigerated food, AS/NZS 60335.2.89
Cable cars, residential, NZS 5270
Cable couplers
for 250 V a.c. circuits, NZS 1989, AS/NZS 60320.1
Cable drums
metal, NZS/AS 3983
timber, AS/NZS 2857
Cable manufacturers' identification threads,
NZS/BS PD 2379
Cables
analogue television, AS/NZS 1367
electrical (see Electric cables)
field testing, balanced cable installations, SAA/SNZ HB 27
LAN cabling, buildings, AS/NZS 3080, AS/NZS 3085, AS/NZS ISO/IEC 15018
reeling and trailing, for mining, AS/NZS 1747
traffic signal installations AS/NZS 2276
welding, AS/NZS 1995
Cabs, safety, for tractors, NZS 5101, AS/NZS 2153
Calfskins, treatment, grading, classification
cured, NZS 8401
green, NZS 8404
Capacitor discharge X-ray generators, AS/NZS 3200.2.15
Capacitors
power frequency, NZS 6106
Caplights for use in mines, AS/NZS 62013
Car seat belts (see Seat belts)
Caravans
LPG use, NZS 5428
- self-containment, NZS 5465
Cardiac
defibrillators, AS/NZS 3200.2.4
pacemakers, AS/NZS 3200.2.31
Care labelling
clothing, textiles, bedding, furnishings, AS/NZS 1957
selection of instructions, AS/NZS 2621
Cargo restraint systems
anchorages and anchorage points, AS/NZS 4384
transport chain and components, AS/NZS 4344
transport fibre rope, AS/NZS 4345
webbing load restraint systems, AS/NZS 4380
Carpet tiles, installation, AS/NZS 2455
Carpets & carpeting
cleaning, AS/NZS 3733
Cars (see also Motor vehicles)
child restraint systems, AS/NZS 1754, AS/NZS 3629
- children with disabilities, AS/NZS 4370
high level stop light, NZS 5461
restraint systems, performance tests, AS/NZS 4475
Cartridge fuse-links, IEC 127
Cast iron
flanges, AS/NZS 4331.2
pressure pipes and fittings, AS/NZS 2544
Castings
copper & alloys, AS/NZS 1279
testing, AS/NZS 2574
Catchment authorities, model bylaw, NZS 9203
Cells, electric (see Batteries)
Cellulose-cement products, AS/NZS 2908
Cement mortar lining
pipelines in situ, AS/NZS 1516
Cement, Portland
limestone filler cement, NZS 3125
methods of test, AS/NZS 2350
pozzolan, NZS 3123
sheets, cellulose, AS/NZS 2908
specification for, NZS 3122
supplementary materials, AS/NZS 3582
Cemeteries
headstones and monuments, NZS 4242
model bylaw, NZS 9201.14
Ceramics
tableware, AS/NZS 4371
Certification and accreditation, SANZ HB 18, AS/NZS ISO/IEC 17020, NZS ISO/IEC 17025
Chainsaws
code of practice for safe use, NZS 5819, AS/NZS 3576
protective legwear, AS/NZS 4453, NZS 5840
specification for safe design, NZS 5819, AS/NZS 60745.2.13
Chairs
children's
- high, NZS/BS 5799
- school, AS/NZS 4610
fixed height, AS/NZS 4688
monobloc, AS/NZS 3813
shower, for use in, AS/NZS 3973
swivel, AS/NZS 4438
toilet, for use in, AS/NZS 3973
Chemical analysis and testing
milk, cream, NZS 2246
Child carrier seats for pedal bicycles, AS/NZS 4287
Child-resistant packaging, NZS 5825
Child-restraining devices
in motor vehicles, AS/NZS 1754, AS/NZS 3629
- children with disabilities, AS/NZS 4370
Children's
clothing, low fire danger night clothes, AS/NZS 1249
cots
- domestic use, AS/NZS 2172
- folding, AS/NZS 2195
- institutional, hospital and nursery use, AS/NZS 2130
school chairs, AS/NZS 4610
Chillers, for liquid, AS/NZS 4776
Christmas tree lights, AS/NZS 60598.2.20
Cigarette lighters, AS/NZS 4867
Cinemas, fire precautions, NZS 9232
Circuit-breakers
high voltage, IEC 56
household, AS/NZS 4898, AS/NZS 60898
miniature, AS/NZS 3111
Civil engineering
contracts, conditions, NZS 3910, NZS 3915
quantities, measurement, NZS 4224
Cladding
cellulose-cement sheets, AS/NZS 2908
materials, AS/NZS 4256, AS/NZS 4257
Classification of hazardous areas, AS/NZS 2430, AS/NZS 60079.10
Clay products (see Ceramics)
Cleaning materials (see also Disinfectants), AS/NZS 2541
acidic detergents, dairy industry, AS/NZS 1389
alkaline detergents, heavy duty, dairy industry, AS/NZS 1400
iodophors, dairy industry, NZS 8341
Cleanrooms & associated controlled environments, AS/NZS ISO 14644
Clocks, electrical safety, AS/NZS 3350.2.26, AS/NZS 60335.2.26
Cloth towels
single-service, AS/NZS 4286
Clothes dryers, AS/NZS 2442, AS/NZS 3350.2.43, AS/NZS 60335.2.43
energy consumption, AS/NZS 2442
tumble dryers, AS/NZS 3350.2.11, AS/NZS 2442, AS/NZS 60335.2.11
Clothing
care labelling, AS/NZS 1957
children's night clothes, low fire danger, AS/NZS 1249
fabrics, low fire danger, NZS 8704
protective (see Protective clothing)
CNG
compressor equipment, NZS 5425.2
cylinders, automotive, NZS 5454
fuel systems, AS/NZS 2739
fuels, use of, AS/NZS 1425
refuelling stations, NZS 5425
- metering devices, NZS 5425
Coal mining (see mining equipment)
Coatings (see also under specific materials)
concrete & masonry, AS/NZS 4548
hot-dip galvanized
- on fabricated ferrous articles, AS/NZS 4680
- on ferrous open sections, AS/NZS 4791
- on ferrous hollow sections, AS/NZS 4792
thermal-bonded, for valves & fittings, AS/NZS 4158
Cockles, processing, NZS 8405
Codes
access facilities, NZS/AS 1657
aluminium structures, AS/NZS 1664
masonry, NZS 4210, AS/NZS 2699
platforms, walkways, stairways, ladders (fixed), NZS/AS 1657
representation of country names AS/NZS 2632
steel structures, NZS 3404, AS/NZS 4600
Cold formed stainless steel structures, AS/NZS 4673
Colours and colour codes
cable manufacturers' identification, NZS/BS PD 2379
electrotechnical, IEC 757
identification, coding and special purposes, NZS 7702
industrial identification, NZS 5807
specification of, AS/NZS 2633
steel product, AS/NZS 4496
Colours for building purposes, AS/NZS 2633
Combustible dusts in hazardous areas, AS/NZS 2290, AS/NZS 2430, AS/NZS 2381, AS/NZS 61241
Commercial refrigerated food cabinets, AS/NZS 60335.2.89
Commercial timbers
standard names, AS/NZS 1148
strength groups, AS/NZS 2878
Common management information
protocol specification, OSI AS/NZS 3964
service definition, OSI, AS/NZS 3964
Communications, graphical symbols for, NZS/IEC 617
Compaction
N.Z. heavy tests for soils, NZS 4402.4.1.2
N.Z. standard test for soils, NZS 4402.4.1.1
N.Z. vibrating hammer tests for soils, NZS 4402.4.1.3
Competencies for electrical equipment for hazardous areas, AS/NZS 4761
Composts, NZS 4454
Compressed natural gas (see CNG)
Compression refrigeration, safety, AS/NZS 1677
Compressor equipment, for CNG, NZS 5425.2
Compressors, motor-compressors, AS/NZS 3350.2.34, AS/NZS 60335.2.34
Computer graphics
coded representation of pictures, NZS/ISO 9282
- 7-bit or 8-bit picture representation, NZS/ISO 9282-1
data representation and exchange IGES, NZS/AS 3643.1
graphical Kernel System (GKS), NZS/ISO 7942, NZS/ISO 8651
- Ada, NZS/ISO 8651.3
- FORTRAN, NZS/ISO 8651.1
- Pascal, NZS/ISO 8651.2
information technology, NZS/ISO/IEC 8632
Computer related graphics, metafiles, NZS/ISO 8632
binary encoding, NZS/ISO 8632-3
character encoding, NZS/ISO 8632-2
clear-text encoding, NZS/ISO 8632-4
functional description, NZS/ISO 8632-1
Computer security (See also Information security), NZS 6656
Concrete
blocks (see Blocks, building)
coatings, AS/NZS 4548
construction, NZS 3109, NZMP 3100
- for minor works, NZS 3124
masonry units (see also Masonry buildings), AS/NZS 4455
paving blocks, interlocking, AS/NZS 4455, NZS 3116
pipes (see Pipes & fittings)
poles (see Poles)
prestressing, AS/NZS 4672
protection and repair, SAA/SNZ HB 84
reinforcement
- design, NZS 3101
- steel bars, NZS 4671
- steel wire, NZS 4671
repair and protection, SAA/SNZ HB 84
specification, NZS 3104
structures for the storage of liquids, NZS 3106
tiles (see Tiles)
Concretes (see also Aggregates)
curing, NZS 3109
grouting, NZS 3109
guide, NZMP 3100
insulating, NZS 3152
lightweight, NZS 3151, NZS 3152
panels, NZS 3151
precast, AS/NZS 4058, NZS 3152
surface finish, NZS 3114
testing, NZS 3111, NZS 3112
water for, NZS 3121
Condensed milk, sweetened, AS/NZS 1766.3.17
Condoms
polyurethane, NZS 7106
rubber, NZS 7104
Conductor current, protective, AS/NZS 60990
Conductors
covered overhead, AS/NZS 3675
steel, NZS/AS 1222
Conduit (see also Trunking systems)
electrical, unplasticized PVC, AS/NZS 2053
marking to show contents, NZS 5807
steel
- flexible, AS/NZS 2053
- for electrical wiring, AS/NZS 2053
Cone penetration limit, test for soils, NZS 4402.2.5
Confined spaces, safe working in, SAA/SNZ HB 213, AS/NZS 2865
Connectionless-mode network service, AS/NZS 4149
Connecting devices
flat quick-connect terminations for copper conductors, AS/NZS 61210
low voltage circuits, AS/NZS 60998
Connectors
electric (see Electric connectors, Electric plugs)
information technology, AS/NZS 4244
Consolidation, tests for soils, NZS 4402.7
Construction (see Building)
noise, NZS 6803
plywood, AS/NZS 2269
sites, electrical installations, AS/NZS 3000, AS/NZS 3012
Contactors, electrical, low voltage, NZS/AS 1029
Containers (see also Packaging)
child-resistant packaging, NZS 5825
fuel, portable, AS/NZS 2906
gas, AS/NZS 3509
hazardous substances, NZS 5418, AS/NZS 3833
reusable, for sharp items, medical applications, AS/NZS 4261
- reprocessing, AS/NZS 4478
Contraceptives
intra-uterine, NZS 7102
polyurethane condoms, NZS 7106
rubber condoms, NZS 7104
Contracts
building and construction work, NZS 3902, NZS 3910, NZS 3915
supply of equipment, AS/NZS 4911
Control cables, multicore and twisted pair AS/NZS 5000.3
Control charts, AS/NZS 3944
Controlgear, for lamps, AS/NZS 61347
Control systems, function charts, preparation of, AS/NZS 4382
Control valves
hot water systems. NZS 4608
gate, resilient seated, NZS/AS 2638.2
Conversion factors, AS/NZS 1376
Cooking appliances
electric, AS/NZS 3350.2.6, AS/NZS 3350.2.9, AS/NZS 60335.2.6, AS/NZS 60335.2.9
- deep fat fryers, AS/NZS 3350.2.13, AS/NZS 60335.2.13
- frypans, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- hotplates, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- microwave ovens, AS/NZS 2895, AS/NZS 3350.2.25, AS/NZS 60335.2.90
- ovens, AS/NZS 3350.2.6, AS/NZS 3350.2.9, AS/NZS 60335.2.6, AS/NZS 60335.2.9
- percolators, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- ranges, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- toasters, AS/NZS 3350.2.9, AS/NZS 60335.2.9
- warming plates, AS/NZS 3350.2.12, AS/NZS 60335.2.12
Coolant, engine, AS/NZS 2108
Coolers, unit, testing, NZS/BS 4856
Copper alloy and composite flanges, AS/NZS 4331.3
Copper & copper alloys
conductors (see Electric cables)
cylinders
- water heating, NZS 4602
refinery shapes, AS/NZS 1279
tubes
- seamless for air-conditioning and refrigeration, AS/NZS 1571
- water, gas, sanitation, NZS 3501
wire
- for electrical purposes, AS/NZS 1574
- for engineering purposes, AS/NZS 1573
wrought rods, bars and sections, AS/NZS 1567
Cord extension sets, AS/NZS 3199
Cord extension sockets, AS/NZS 3120
Cordless telephones
radiocommunications requirements, AS/NZS 4281
Cords, electric (see also: Electric cables)
flexible, AS/NZS 3191
test methods, AS/NZS 1660
Corrosion protection, iron and steel, AS/NZS 2312, AS/NZS 2728
Corrugated cellulose cement sheets, AS/NZS 2908
Cots
domestic use, AS/NZS 2172
folding, AS/NZS 2195
institutional, hospital and nursery use, AS/NZS 2130
Couplers
appliances, AS/NZS 60320
approval and test specification, AS/NZS 3123, AS/NZS 61535
installation, AS/NZS 61535
Coupling devices, articulated vehicles
fifth wheel assemblies, NZS 5450
fifth wheel kingpins, NZS 5451
Couplings
metal-banded, low-pressure applications, AS/NZS 4327
trailers, NZS 5232
Courier service, see introductory pages
Covered overhead conductors, AS/NZS 3675
Cradles, rocking, AS/NZS 4385
Cranes
design rules, NZS/BS 2573
safe use, AS/NZS 2550
vehicle hoists, AS/NZS 1418.9
Crates, stock transportation, NZS 5413
Crayfish, processing, NZS 8406
Cream, analysis methods, NZS 2246
Crematoria, model bylaw, NZS 9201.14
Crimped connections, AS/NZS 4437
Critical path analysis, glossary, NZS/BS 4335
Cut and fill (see Fill)
Cutting, with gas torch, safety, NZS 4781
Cycles
lighting and retroreflectors, NZS 5441
normal road use, safety, AS/NZS 1927
Cyclists, protective helmets, AS/NZS 2063
methods of test, AS/NZS 2512
Cylinders, CNG, automotive, NZS 5454, AS/NZS 2739
Cylinders for gases
automotive, AS/NZS 3509
identification markings, NZS 5807

Dairy industry
acidic detergents, AS/NZS 1389
alkaline detergents, heavy duty, AS/NZS 1400
cleaning-in-place, AS/NZS 2541
herd testing, NZS 8100
iodophors, NZS 8341
microbiology, AS/NZS 1766
water heaters, electric, dairy type, NZS 4604
Damp-proof courses and flashings, AS/NZS 2904
methods of test, AS/NZS 4347
Dams, sexual use, AS/NZS 4592
Dangerous materials
classification of hazardous areas, AS/NZS 2430, AS/NZS 2381, AS/NZS 60079.10, AS/NZS 61241
containers for transport, NZS 5418, AS/NZS 3833
glossary of terms, SAA/SNZ HB 95
initial emergency response guide, SNZ HB 76
labels for transportation, NZS 5433
land transport, NZS 5433, SNZ HB 77
portable fuel containers, AS/NZS 2906
storage, AS/NZS 1596, AS/NZS 2022, AS/NZS 2927, AS/NZS 3833, AS/NZS 4081, NZS 4403, AS/NZS 4452, AS/NZS
4681, NZS 6102
transportation, NZS 5433
Data communication
9-pin and 37-pin, AS/NZS 3612, AS/NZS 3512, AS/NZS 4157
15-pin, NZS/ISO 4903
connectionless transport protocol, AS/NZS 3651, AS/NZS 3682
interconnection of DTE, NZS/ISO TR 7477
multilink procedures, NZS/ISO 7478
network service definition, AS/NZS 2994
signal quality at DTE/DCE interfaces, AS/NZS 3618
transmission equipment, AS/NZS 4771
Data link layer conformance test suite, AS/NZS 4157, AS/NZS 3621, AS/NZS 3512
Data processing equipment (see also Information processing)
interfacing
- ISDN basic access interface, AS/NZS 3594
- safety, AS/NZS 60950
Data Terminal Equipment, see DTE
Database language, SQL, AS/NZS 3968
Dates and times, representation, NZS/ISO 8601, AS/NZS 3802
DCE/DTE Interfaces
connectors, AS/NZS 3512, AS/NZS 3612, AS/NZS 4157, NZS/ISO 4903
signal quality, AS/NZS 3618
Deaf people, telephones for, AS/NZS 4277
Decorative lighting sets, AS/NZS 60598.2.20
Dementia-care
community services for, SNZ HB 8134.6
indicators for, SNZ HB 8163
residential services for, SNZ HB 8134.5
Demolition sites, electrical installations, AS/NZS 3012
Density of soils
particle tests, NZS 4402.2.7
tests, NZS 4402.5.1
Dento-maxillofacial X-ray equipment, AS/NZS 3200.2.201
Design (see specific types e.g. Building design)
Design and construction, playgrounds, NZS 5828, SNZ HB 5828
Design loadings
buildings generally, NZS 4203, AS/NZS 1170
on buried concrete pipes, AS/NZS 3725
Design for safer houses, NZS 4102
Desks, office, AS/NZS 4442
Detergent (see Cleaning materials)
Diagnostic
ultrasonic equipment, AS/NZS 4194, AS/NZS 4374
X-ray
- assemblies, AS/NZS 3200.2.28
- generators, AS/NZS 3200.2.7
Diagrams, charts, tables, for electrotechnology, AS/NZS 4383, AS/NZS 4382
Dictionary (see also Glossary)
information resource dictionary system services, AS/NZS 4227
Digital
broadcasting, AS/NZS 4540, AS/NZS 4541
data transmission, NZS/ISO 211
television transmission, NZS 6610
video, SAA/SNZ MP74
Disabled persons
access to buildings, NZS 4121
children & young persons, SNZ HB 8134.4
driving controls, NZS 5832
health and disability services, NZS 8134
hospital audits, SNZ HB 8134.2
intellectual disability, SNZ HB 8134.3, SNZ HB 8134.6
residential services, SNZ HB 8134.1, SNZ HB 8134.5
safety issues, NZS 8134, SNZ HB 8134
walking aids, NZS 5831
Discounts, see introductory pages
Dishwashers, AS/NZS 3350.2.5, AS/NZS 60335.2.5
energy consumption and labelling, AS/NZS 2007
Disinfectants, evaluation methods, NZS 8302
Dispensers, fuel, hoses for LP Gas, AS/NZS 1869
Dispensing equipment
explosive atmospheres, AS/NZS 2229
vending machines, AS/NZS 3350.2.75, AS/NZS 4864, AS/NZS 60335.2.75
Distress beacons, satellite, AS/NZS 4280, AS/NZS 4869
Distribution systems, sound, television, NZS 6603
Diving, occupational, AS/NZS 2299
Documentation, software user, AS/NZS 4258, AS/NZS 4598
Dogs
breeds, identifying, NZS 8800
control, model bylaw, NZS 9201.12
Domestic appliances (see Household electrical appliances)
Domestic solid fuel burning appliances, AS/NZS 2918
with electrical connections, AS/NZS 60335.2.102
Door locks & latches, NZS/BS 5872
Doors (see also specific types, e.g. Fire doors)
automatic sliding door assemblies, NZS 4239
garage, AS/NZS 3350.2.95, AS/NZS 4504, AS/NZS 4505, AS/NZS 60335.2.95
internal and external fire doorsets, NZS 4232, AS/NZS 1905
locks and latches, NZS/BS 5872
Doppler foetal heartbeat detectors, performance, AS/NZS 4374
Dosemeters, radiotherapy, AS/NZS 3200.2.9
Drainage
air admittance valves, AS/NZS 4936
land, model bylaw, NZS 1711
pipes (see Pipes & fittings, and Tubes)
rainwater accessories and fasteners, AS/NZS 2179
Drainpipes, unplasticized PVC, underground, AS/NZS 1260, AS/NZS 1462, AS/NZS 4401
installation, AS/NZS 2032
Drawbar trailers, towing connections, NZS 5446
Drawing practice
building & civil engineering, NZS 5902
electrical & electronic
- for students, SAA/SNZ HB 3
engineering, BS 5070, NZS/AS 1100
technical, NZS/AS 1100
- for students, SAA/SNZ HB 1
Drills, twist, AS/NZS 2438
Drinking water
sampling, AS/NZS 5667
treatment units, AS/NZS 3497
Driving controls for disabled persons, NZS 5832
Drugs
destruction & handling, AS/NZS 4757
in urine, AS/NZS 4308
treatment, NZS 8157
Dry riser (see Riser mains)
Dryers, clothes, AS/NZS 2442, AS/NZS 3350.2.43, AS/NZS 60335.2.43
tumble dryers, AS/NZS 3350.2.11, AS/NZS 2442, AS/NZS 60335.2.11
DTE/DCE
interface back-up control, AS/NZS 4161
interface connector
- 9-pin and 37-pin, AS/NZS 3612, AS/NZS 3512, AS/NZS 4157
- 15-pin, NZS/ISO 4903
- contact number assignments, AS/NZS 2794
- mateability dimensions, AS/NZS 2794
interfaces, signal quality, AS/NZS 3618, AS/NZS 4160
X.25 packet level protocol, AS/NZS 3621, AS/NZS 3512, AS/NZS 4157
DTMF signalling, AS/NZS 4263
Duct Heaters, electric, AS/NZS 3102
Ductile iron pressure pipes and fittings, AS/NZS 2280
Ducts (see Conduits, and Pipes & fittings)

Earth building
engineering design, NZS 4297
materials and workmanship, NZS 4298
not requiring specific design, NZS 4299
Earth fill for residential development, NZS 4431
Earthenware (see Ceramics)
Earthquakes
design loadings for buildings, NZS 1170.5, NZS 4203
reinforced concrete design, NZS 3101
seismic resistance in buildings, NZS 4219
seismic restraint of building contents, NZS 4104
Eaves, design of, SAA/SNZ HB 114
Edison-type screw lampholders, AS/NZS 3140, AS/NZS 60238
Elastomeric joint rings for pipes, NZS/BS 2494
Elbow crutches, NZS 5831
Electric cables
accessories, test requirements, AS/NZS 4805
aerial (see overhead - listed below)
analogue television, AS/NZS 1367
conductors, NZS/AS 1125
connectors, AS/NZS 4325, AS/NZS 60998
- insulation piercing, AS/NZS 4396, AS/NZS 60998.2.3
control, AS/NZS 5000.3
copper wire, AS/NZS 1574
drums
- metal, NZS/AS 3983
- timber, AS/NZS 2857
elastomer insulated, AS/NZS 3116
fire performance, AS/NZS 4507
fire tests, AS/NZS 1660.5
flexible cords, AS/NZS 3191
high voltage luminous signs, AS/NZS 3166
identification colours of threads, NZS/BS PD 2379
insulating
- materials, AS/NZS 1660, AS/NZS 3808
- sleeving, AS/NZS 1660.2
lead sheaths, AS/NZS 2893
marking, AS/NZS 4417
mineral-insulated
- cables to 750V, AS/NZS 60702.1
- metal-sheathed (MIMS), AS/NZS 60702
- terminations, AS/NZS 60702.2
mining, AS/NZS 1747, AS/NZS 2802
multicore, control, AS/NZS 5000.3
overhead
- aerial bundled (HV), NZS/AS 3599
- aerial bundled (LV), AS/NZS 3560
- aerial bundled (LV) fittings, NZS/AS 3766
- aluminium, NZS/AS 1531
- aluminium, steel reinforced, NZS/AS 3607
- copper, AS/NZS 1574, NZS 2206, NZS/AS 1746
- PVC covered, NZS 1762
- steel (transmission), NZS/AS 1222
paper insulated, AS/NZS 1026
polymeric insulated, AS/NZS 1429, AS/NZS 4961, AS/NZS 5000
PVC insulated, AS/NZS 60227
reeling and trailing
- coal mining, AS/NZS 1747, AS/NZS 1802
- general, AS/NZS 2802
rubber insulated, AS/NZS 60245
selection of, AS/NZS 3008
short-circuit temperature limits, IEC 724
silicone rubber insulated, NZS/AS 3178
television, AS/NZS 1367
test methods, AS/NZS 1660
traffic signal installations, AS/NZS 2276
trunking systems, AS/NZS 4296
twisted pair, AS/NZS 2373
underground coal mines, AS/NZS 1802, AS/NZS 1972
underground residential distribution, AS/NZS 4026
Electric or electrical
anaesthetic workstations, AS/NZS 3200.2.13
appliances (see also specific appliance names and
Electrical household appliances - listed below)
- for heating liquids, AS/NZS 3350.2.15, AS/NZS 60335.2.15
aquarium equipment, AS/NZS 3350.2.41, AS/NZS 60335.2.41
audio, AS/NZS 60065
ballasts for fluorescent lamps, AS/NZS 60929, AS/NZS 61347
barbecues, outdoor, AS/NZS 3350.2.78, AS/NZS 60335.2.78
batteries (see Batteries)
battery chargers, AS/NZS 3350.2.29, AS/NZS 60335.2.29
beauty therapy equipment, AS/NZS 3130
blankets, AS/NZS 3350.2.17, AS/NZS 60335.2.17
cables (see Electric cables)
cardiac defibrillators, AS/NZS 3200.2.4
cells (see Batteries)
Christmas tree lighting sets, AS/NZS 60598.2.20
clocks, AS/NZS 3350.2.26, AS/NZS 60335.2.26
clothes dryers, AS/NZS 2442, AS/NZS 3350.2.43, AS/NZS 60335.2.43
- tumble dryers, AS/NZS 3350.2.11, AS/NZS 2442, AS/NZS 60335.2.11
commercial refrigerated food cabinets, AS/NZS 60335.2.89
conduits
- PVC, AS/NZS 2053, AS/NZS 1462
connectors
- for trailer vehicles, NZS/AS 2513
- low voltage circuits, AS/NZS 60998
control or conditioning devices, portable, AS/NZS 3197
cooking appliances, AS/NZS 3350.2.6, AS/NZS 3350.2.9, AS/NZS 60335.2.6, AS/NZS 60335.2.9
cord extension sets, AS/NZS 3199
cords, flexible, AS/NZS 3191
current
- effects on human beings & livestock, AS/NZS 60479
drives
- blinds, shutters, AS/NZS 3350.2.97, AS/NZS 60335.2.97
- vertical garage doors, AS/NZS 3350.2.95, AS/NZS 60335.2.95
equipment (see also Electrical household appliances
listed below and specific equipment names)
- ceiling-roses, AS/NZS 3113
- coalmines, AS/NZS 2081, AS/NZS 3584, AS/NZS 4871
- general requirements, AS/NZS 3350, AS/NZS 3100,
- inspection & testing, AS/NZS 3760, AS/NZS 5761, AS/NZS 5762
- meter boxes, NZS 6206
- shaver supply units, AS/NZS 3194, AS/NZS 61558.2.5
fabric steamers, AS/NZS 3350.2.85, AS/NZS 60335.2.85
fans, AS/NZS 3350.2.80, AS/NZS 60335.2.80
fences
- controllers, mains, NZS 6203
- energizers, AS/NZS 3350.2.76, AS/NZS 60335.2.76
- installation & operation, AS/NZS 3014
fences, security, AS/NZS 3016
fire hazard testing, AS/NZS 60112
fishing machines, AS/NZS 60335.2.86
floor polishers, AS/NZS 3350.2.10, AS/NZS 60335.2.10, AS/NZS 60335.2.67, AS/NZS 60335.2.72,
AS/NZS 60745.2.3
foot warmers, AS/NZS 3350.2.81, AS/NZS 60335.2.81
fryers, deep fat, AS/NZS 3350.2.13, AS/NZS 60335.2.13
glow starters for fluorescent lamps, AS/NZS 60155
hair clippers, AS/NZS 3350.2.8, AS/NZS 60335.2.8
hand-held portable tools, AS/NZS 3160, AS/NZS 60745
hazards on metallic pipelines, AS/NZS 4853
hazardous areas
- coal mines, AS/NZS 2290
- competencies for working with, AS/NZS 4761
- spray painting booths, AS/NZS 4114
heaters (see also Space heaters, Water heaters)
- installation, NZS 6110
- safety, AS/NZS 3102, AS/NZS 3350.2.61, AS/NZS 60335.2.61
- underfloor, AS/NZS 60335.2.106
household appliances (see also Household equipment)
- air conditioners and heat pumps, AS/NZS 3823
- amusement machines, AS/NZS 3350.2.82, AS/NZS 60335.2.82
- barbecues, outdoor, AS/NZS 3350.2.78, AS/NZS 60335.2.78
- blankets, AS/NZS 3350.2.17, AS/NZS 60335.2.17
- clocks, AS/NZS 3350.2.26, AS/NZS 60335.2.26
- clothes dryers, AS/NZS 2442, AS/NZS 3350.2.43, AS/NZS 60335.2.43
- clothes dryers, tumble, AS/NZS 3350.2.11, AS/NZS 2442, AS/NZS 60335.2.11
- dishwashers, AS/NZS 3350.2.5, AS/NZS 60335.2.5
- fans, AS/NZS 3350.2.80, AS/NZS 60335.2.80
- fryers, deep fat, AS/NZS 3350.2.13, AS/NZS 60335.2.13
- frypans, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- general requirements, AS/NZS 3350.1, AS/NZS 3100,
- grillers, AS/NZS 3350.2.6, AS/NZS 3350.2.9, , AS/NZS 60335.2.6, AS/NZS 60335.2.9
- hairdryers, portable, AS/NZS 335.2.23
- hot plates, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- humidifiers, AS/NZS 3350.2.98, AS/NZS 60335.2.98
- ice makers, storage bins, AS/NZS 4865
- irons, AS/NZS 3350.2.3, AS/NZS 60335.2.3
- jugs, AS/NZS 3350.2.15, AS/NZS 60335.2.15
- kitchen machines, AS/NZS 3350.2.14, AS/NZS 60335.2.14
- massage appliances, AS/NZS 3350.2.32, AS/NZS 60335.2.32
- measurement of standby power, AS/NZS 62301
- microwave ovens, AS/NZS 3350.2.25, AS/NZS 60335.2.90
- oral hygiene appliances, AS/NZS 3350.2.52, AS/NZS 60335.2.52
- ovens, AS/NZS 3350.2.9, AS/NZS 60335.2.9
- percolators, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- portable immersion water heaters, AS/NZS 3350.2.74, AS/NZS 60335.2.74
- projectors, AS/NZS 3350.2.56, AS/NZS 60335.2.56
- range hoods, AS/NZS 3350.2.31, AS/NZS 60335.2.31
- reconditioning and recycling, AS/NZS 4701
- refrigerators and freezers, AS/NZS 4474, AS/NZS 3350.2.24, AS/NZS 60335.2.24
- rotisseries, AS/NZS 3350.2.6, AS/NZS 60335.2.6
- sauna, AS/NZS 3350.2.53, AS/NZS 60335.2.53
- service machines, AS/NZS 3350.2.82, AS/NZS 60335.2.82
- spa baths, whirlpool baths, AS/NZS 3350.2.60, AS/NZS 60335.2.60
- toasters, AS/NZS 3350.2.9, AS/NZS 60335.2.9
- toilets, AS/NZS 3350.2.84, AS/NZS 60335.2.84
- tumble dryers, AS/NZS 3350.2.11, AS/NZS 60335.2.11
- warming plates, AS/NZS 3350.2.12, AS/NZS 60335.2.12
- washing machines, AS/NZS 3350.2.7, AS/NZS 60335.2.7
inspection and testing of equipment
- in-service, AS/NZS 3760
- second-hand, AS/NZS 5761
- repaired, AS/NZS 5762
installations
- buildings and structures, AS/NZS 3000, NZMP 6004
- cable selection, AS/NZS 3008
- construction and demolition sites, AS/NZS 3012
- domestic, AS/NZS 3000, AS/NZS 3018, NZMP 6004
- emergency power supplies in hospitals, AS/NZS 3009
- fire and mechanical performance, AS/NZS 3013
- generating sets, AS/NZS 3010
- heating systems, NZS 6110
- hospitals & medical, AS/NZS 3003, AS/NZS 4510, NZS 3003
- non-standard voltages, NZS 6114
- testing and verification guidelines, AS/NZS 3017
- within telecommunications networks, AS/NZS 3015
instantaneous water heaters, AS/NZS 3350.2.35, AS/NZS 60335.2.35
insulating mats, AS/NZS 2978
insulation, resistance, testing, AS/NZS 3017
inverters, portable, AS/NZS 4763
ironers, AS/NZS 3350.2.44, AS/NZS 60335.2.44
kitchen machines, AS/NZS 3350.2.14, AS/NZS 60335.2.14
lawn
- mowers, AS/NZS 60335.2.77
- scarifiers, AS/NZS 60335.2.92
- trimmers, AS/NZS 60335.2.91
lighting fittings, marking, AS/NZS 4417
medical equipment, AS/NZS 3200 series, AS/NZS 4513
- anaesthetic workstations, AS/NZS 3200.2.13
- blankets, pads & mattresses, AS/NZS 3200.2.35
- blood pressure, direct monitoring, AS/NZS 3200.2.34
- blood pressure, indirect monitoring, AS/NZS 3200.2.34
- cardiac pacemakers, AS/NZS 3200.2.31
- dento-maxillofacial X-ray equipment, AS/NZS 3200.2.201
- diagnostic ultrasonic equipment, AS/NZS 4194, AS/NZS 4374
- DICOM, AS/NZS 4580
- electrocardiographs AS/NZS 3200.2.25, AS/NZS 3200.2.27
- electron accelerators, AS/NZS 4434, AS/NZS 3200.2.1
- endoscopic equipment, AS/NZS 3200.2.18
- haemodialysis, AS/NZS 3200.2.16
- hospital beds, AS/NZS 3200.2.38
- hospital lighting, AS/NZS 1680.2.5
- infant apnoea monitors, AS/NZS 3200.2.202
- infusion pumps, AS/NZS 3200.2.24
- magnetic resonance, for medical diagnosis, AS/NZS 3200.2.33
- mammographic X-ray, AS/NZS 3200.2.45
- meat processing industry, NZS 6116
- medical imaging, AS/NZS 4184
- mobile connectable installations, NZS 6115
- operating tables, AS/NZS 3200.2.46
- programmable systems, AS/NZS 3200.1.4
- radionuclide calibrators, AS/NZS 4354
- radionuclide imaging devices, AS/NZS 4378, AS/NZS 4545
- radiotherapy dosemeters, AS/NZS 3200.2.9
- radiotherapy equipment, AS/NZS 4495
- radiotherapy simulators, AS/NZS 3200.2.29, AS/NZS 4213
- risk management, AS/NZS 4810
- safe use in patient care, AS/NZS 2500
- surgical equipment, AS/NZS 3200.2.2
- ultrasonics, AS/NZS 3200.2.5, AS/NZS 4188, AS/NZS 4190, AS/NZS 4374, AS/NZS 4713
- X-ray equipment for interventional procedures, AS/NZS 3200.2.43
- X-ray equipment for tomography, AS/NZS 3200.2.44
microwave ovens, AS/NZS 2895, AS/NZS 3350.2.25 , AS/NZS 60335.2.90
motors, AS/NZS 1359
oral hygiene appliances, AS/NZS 3350.2.52, AS/NZS 60335.2.52
patient care, safe use, AS/NZS 2500
plugs & socket outlets, AS/NZS 3112, AS/NZS 3123
- cord extension sockets, AS/NZS 3120
- for 250 V a.c. circuits, protected, non-reversible, NZS 1989
- plug socket adaptors, AS/NZS 3122
portable outlet devices, AS/NZS 3105
power cables
- with extruded insulation, AS/NZS 60840
- with copper or aluminum conductors, AS/NZS 4325
power distribution lines (see Power lines)
power supply
- emergency, NZS 6104, AS/NZS 3009
- external, AS/NZS 4665
- non-standard voltages, NZS 6114
powertrack systems, AS/NZS 61534
power transmission lines (see Power lines)
refrigerated food cabinets, commercial, AS/NZS 60335.2.89
refrigerated room air-conditioners, AS/NZS 3350.2.40, AS/NZS 60335.2.40
room heaters, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
rotating machines, AS/NZS 1359
sewing machines, AS/NZS 3350.2.28, , AS/NZS 60335.2.28, AS/NZS 60320.2.1
shavers, AS/NZS 3350.2.8, AS/NZS 60335.2.8
showers, AS/NZS 60335.2.105
soldering irons, AS/NZS 3350.2.45, AS/NZS 60335.2.45
spin extractors, AS/NZS 3350.2.4, AS/NZS 60335.2.4
steam cleaners, AS/NZS 3350.2.79, AS/NZS 60335.2.79
storage water heaters, AS/NZS 4692, AS/NZS 3350.2.21, AS/NZS 60335.2.21
switches, AS/NZS 3139
testing
- general guidelines, AS/NZS 3100
- guidelines, AS/NZS 3017
- in-service, AS/NZS 3760
thermostats and thermal cutouts, NZS 6214
transformers (see Transformers)
underfloor heating, AS/NZS 60335.2.106
vaporizers, AS/NZS 60335.2.101
video, AS/NZS 60065
water-bed heaters, AS/NZS 3350.2.66, AS/NZS 60335.2.66
winding wires
- enamelled, AS/NZS 1194
- spools, NZS/AS 1005
wires and cables, wiring
- PVC conduit and fittings, AS/NZS 1462, AS/NZS 2053
- UPVC conduit & fittings, AS/NZS 2053
Electrical
apparatus in potentially explosive atmospheres AS/NZS 2229, AS/NZS 60079
- competencies for working with, AS/NZS 4761
- electrical resistance trace heating, AS/NZS 60079.30
- repair & overhaul, AS/NZS 3800
connectors for trailer vehicles, NZS/AS 2513
control or conditioning devices, portable, AS/NZS 3197
drawing practice, for students, SAA/SNZ HB 3
household appliances, AS/NZS 60335
installations, buildings structures and premises, AS/NZS 3000, AS/NZS 3003, NZMP 6004, AS/NZS 3001, AS/NZS 3002,
AS/NZS 3004, AS/NZS 3008, AS/NZS 3832, NZS 3003
- cable selection, AS/NZS 3008
- in-service testing, AS/NZS 3019
lighting equipment, AS/NZS 4783
safe working, low voltage, AS/NZS 4836
Electrical requirements and approvals in New Zealand, AS/NZS 4417
Electricity
effects on humans & livestock, AS/NZS 60479
emergency, NZS 6104
in-service testing, AS/NZS 1284.13
safe use in patient care, AS/NZS 2500
safety management systems, NZS 7901
static, AS/NZS 1020
substations, NZS 6108
Electrocardiographs, AS/NZS 3200.2.25, AS/NZS 3200.2.27
Electrocutors, insect, AS/NZS 3350.2.59, AS/NZS 60335.2.59
Electrodes
buildup & wear resistance, AS/NZS 2576
covered, for welding, AS/NZS 4855, AS/NZS 4856, AS/NZS 4857
metal arc, AS/NZS 2717, AS/NZS 4854, AS/NZS ISO 14343
procurement guidelines, AS/NZS ISO 544, AS/NZS ISO 14344
tubular cored, AS/NZS ISO 17632, AS/NZS ISO 17633, AS/NZS ISO 17634, AS/NZS ISO 18276
wires and rods, AS/NZS ISO 18273
Electroencephalographs, AS/NZS 3200.2.26
Electromagnetic compatibility
environment, AS/NZS 61000.2
generic emission, AS/NZS 4251
generic immunity and emission standards, AS/NZS 61000.6
limits, AS/NZS 61000.3
radiocommunications equipment, AS/NZS 4268, AS/NZS 4778
testing & measurement, AS/NZS 61000.4
Electromagnetic interference
generic emission
- residential, commercial, light industry, AS/NZS 61000.6, AS/NZS 4251, AS/NZS CISPR 14.1
generic immunity
- residential, commercial, light industry, AS/NZS 61000.6, AS/NZS CISPR 14.2
limits and measurements
- appliances and tools, AS/NZS CISPR 14.1
- high voltage equipment, NZS 6869
- immunity of household appliances, AS/NZS CISPR 14.2
- immunity of sound and television receivers, AS/NZS 4053, AS/NZS CISPR 20
- industrial, scientific and medical (ISM), AS/NZS CISPR 11
- measuring equipment and methods, AS/NZS CISPR 16
- microwave ovens, AS/NZS 4052, AS/NZS 60335.2.90
- overhead a.c. powerlines, NZS 6869
- protection of receivers, AS.NZS CISPR 25
- receivers on board vehicles, AS/NZS 4448
- spark-ignited systems, AS/NZS CISPR 12
- television and video recorder, AS/NZS CISPR 13
- vehicles & boats, internal combustion engine driven, AS/NZS CISPR 12, AS/NZS CISPR 25
measuring apparatus and methods, AS/NZS CISPR 16
requirements for household appliances, AS/NZS CISPR 14
Electronic
fee transactions, NZS 6906
imaging, forms design, AS/NZS ISO 12029
Electroplated coatings, zinc or zinc/aluminium-alloy, AS/NZS 4534
Electrotechnology
control systems, function charts for, AS/NZS 4382
diagrams, AS/NZS 4383
documents used in, preparation of, AS/NZS 4383
graphical symbols, AS/NZS 1102
vocabulary, AS/NZS 1852
Emergency lighting, AS/NZS 2293, AS/NZS 60598.2.22
Emergency locator beacons, AS/NZS 4330, AS/NZS 4869
Energy
audits, AS/NZS 3598
conservation in non-residential buildings, NZS 4220
consumption
- audio & video equipment, AS/NZS 62087
- clothes dryer, AS/NZS 2442
- dishwasher, AS/NZS 2007.1
- rotary clothes dryers, AS/NZS 2442
- washing machine, AS/NZS 2040
efficiency, large buildings, NZS 4243
labelling
- ballasts for fluorescent lamps, AS/NZS 4783.2
- clothes washing machines, AS/NZS 2040
- dishwasher, AS/NZS 2007.2
- refrigerators, AS/NZS 4474
- room air-conditioners, AS/NZS 3823
- rotary clothes dryers, AS/NZS 2442
regulators, AS/NZS 3161
Engineering
drawing practice, BS 5070, NZS/AS 1100
quality, AS/NZS 3905.12
survey drawing, NZS/AS 1100
systems, seismic resistance, NZS 4219
Engines, coolant, AS/NZS 2108
Environmental management systems, AS/NZS ISO 14001, AS/NZS ISO 14004
assessment, AS/NZS 14015
auditing, AS/NZS 19011
labels, AS/NZS ISO 14021
life cycle assessment
- goal & scope definition & inventory analysis, AS/NZS 14041
- life cycle impact assessment, HB 207.3, AS/NZS 14042
- life cycle interpretation, AS/NZS 14043
- principals & framework, AS/NZS 14040
performance evaluation, AS/NZS 14031, SAA/SNZ HB 145
risk management HB 203
sustainability reports, verification & validation of, AS/NZS 5911(Int)
Environmental sound, assessment, NZS 6802
Epoxy paint, AS/NZS 3750
Equipment for playgrounds, NZS 5828, SNZ HB 5828
Ergonomic fixed height chairs, AS/NZS 4688
Escalators, NZS/AS 1735
Exit signs, electrical, AS/NZS 2293
Explosion protected electrical equipment, MP 87, AS/NZS 2229, AS/NZS 2381, AS/NZS 60079, AS/NZS 61241
Explosions, hazardous areas, AS/NZS 2290, AS/NZS 2430, AS/NZS 2381, AS/NZS 61241
Explosive atmospheres
determination of flash point, AS/NZS 2106
diesel engine systems, AS/NZS 3584, MP 87
electrical equipment in, AS/NZS 2229, AS/NZS 2290, AS/NZS 60079, MP 87
- competencies for working with, AS/NZS 4761
repair & overhaul of electrical apparatus, AS/NZS 3800
Explosives, storage, handling, use, NZS 4403
Exporters, Technical Help to, see introductory pages
Extension sets, cord, AS/NZS 3199
Eye protectors
filters, AS/NZS 1337.4
for laser adjustment, AS/NZS 1337.5
impact protection, AS/NZS 1337.6
industrial applications, AS/NZS 1337
occupational, AS/NZS 1336
protection against radiation, AS/NZS 1338
racquet sports, AS/NZS 4066
sunglasses, AS/NZS 1067

Fabric steamers, AS/NZS 3350.2.85, AS/NZS 60335.2.85


Fabrics (see also Textiles)
low fire danger, NZS 8704
Fall protection, roof edge systems, AS/NZS 4994
Fall-arrest systems, industrial, AS/NZS 1891, AS/NZS 4488
Family violence, risk assessment, NZS 8006
Fan coil units, testing & rating, NZS/BS 4856
Fans, electric, AS/NZS 3350.2.80, AS/NZS 60335.2.80
Farm buildings, model building bylaw, NZS 1900: Chapter 11.2
Fascia boards, profiles, NZS 3617
Fasteners
BS Whitworth thread, AS/NZS 2451
carbon & alloy steel, AS/NZS 4291
coach screws, metric, AS/NZS 1393
cross recessed
- countersunk head tapping screws, AS/NZS 4407, AS/NZS 4408
- pan head tapping screws, AS/NZS 4406
hexagon
- flange head tapping screws, AS/NZS 4410
- head tapping screws, AS/NZS 4402
- washer head tapping screws, AS/NZS 4409
ISO, metric, machine screws, AS/NZS 1427
metric machine screws, AS/NZS 1427
slotted
- countersunk head tapping screws, AS/NZS 4404
- pan head tapping screws, AS/NZS 4403
- raised countersunk head tapping screws, AS/NZS 4405
tapping screws
- heat treated steel, mechanical properties, AS/NZS 4412
- thread AS/NZS 4411
tower bolts, AS/NZS 1559
Whitworth thread, AS/NZS 2451
Fat determination in milk, Gerber method, NZS 501
Fences
electric
- controllers, mains, NZS 6203
- energizers, AS/NZS 3350.2.76, AS/NZS 60335.2.76
- installation & operation, AS/NZS 3014
- security, AS/NZS 3016
for swimming pools, spas, hot tubs, NZS 8500
galvanized steel wire, NZS 3471
posts, timber, NZS 3607
Ferrous articles, galvanized coatings, AS/NZS 4534, AS/NZS 4680
Fertility services, NZS 8181, SNZ HB 8181
Fibre building board (see Boards)
Fibre content labelling, textiles, AS/NZS 2622
Fibre reinforced cement sheets, AS/NZS 2908
Fibreboard, corrugated, APPITA tests, NZS/AS and AS/NZS 1301
Fibres
natural and man-made
- generic names, AS/NZS 2450
wool
- calculation of yield, AS/NZS 1362
- core test regulations, AS/NZS 4447
- determination of vegetable matter base, AS/NZS 1134
- grab sampling, greasy wool, AS/NZS 1363
- IWTO certificates, AS/NZS 1362
- length after carding, NZS 8719
- mean fibre diameter, AS/NZS 1133
- measurement of the bulk of raw wool, NZS 8716
- staple length and strength, AS/NZS 2810
- subsampling staples from grab samples, AS/NZS 2721
Fibrous plaster sheet (see Boards)
Fifth wheels, articulated vehicles
assemblies, NZS 5450
kingpins, NZS 5451
Fill, earth, for residential development, NZS 4431
Film, polythene, NZS 7651
Film sites, electrical safety, AS/NZS 4249
Finger-jointed structural timber, AS/NZS 1491
Finishes, concrete surfaces, NZS 3114
Fire
alarms (see also Fire detectors), NZS 4512
blankets, AS/NZS 3504
brigade connections, boxes for riser mains, inlets etc., NZS 4521
detectors, heat actuated, NZS 4512
doors, NZS 4232, AS/NZS 1905
electrotechnical products, hazard testing, AS/NZS 60112
extinguishers
- aerosol, AS/NZS 4353
- marking, NZS 5807
- portable, AS/NZS 1841
- pyrogen, AS/NZS 4487
- testing and rating, AS/NZS 1850
hazard testing, AS/NZS 60695, AS/NZS 60112
hazardous areas, AS/NZS 2381, AS/NZS 2430, AS/NZS 61241
- apparatus for, AS/NZS 2229, AS/NZS 60079
hose reels, AS/NZS 1221
hydrants
- location marking, NZS 4501
- systems, NZS 4510
- underground, NZS/BS 750
open air, Model By-law, NZS 9201.11
prevention, model bylaw, NZS 9231
protection equipment
- footwear, AS/NZS 4821
- pyrogen, AS/NZS 4487
- wildland firefighting, AS/NZS 4824
resistance tests, NZS/ISO 834
risk management, SNZ HB 4525
safety
- atrium buildings, NZS 4238
- cinemas, theatres, places of assembly, NZS 9232
- fabrics, low fire danger, NZS 8704
- low fire danger children's night clothes, AS/NZS 1249
sprinkler systems
- automatic, NZS 4541
- residential, NZS 4515, NZS 4517
tests
- building materials and structures, AS/NZS 1530, NZS/ISO 834
- combustibility, AS/NZS 1530
- early fire hazard, AS/NZS 1530
- flammability of materials, AS/NZS 1530
- smoke control AS/NZS 1530
windows, NZS 4232
Firefighting
equipment (see also specific items)
- hand operated, NZS 4503
- helmets, AS/NZS 4067
- protective footwear, AS/NZS 4821
- protective clothing for wildland firefighting, AS/NZS 4824
- pyrogen, AS/NZS 4487
- waterway, SNZ PAS 4505

water supplies, SNZ PAS 4509


Fireplaces, AS/NZS 2918, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014
pellet heaters, AS/NZS 4886, AS/NZS 5078
Fish (see also Shellfish), handling, processing, distribution, NZS 8402
Fishing, electric fishing machines, AS/NZS 60335.2.86
Flammable gas and vapour atmospheres
apparatus, AS/NZS 2229, AS/NZS 60079
electrical equipment for, AS/NZS 1826
hazardous areas, AS/NZS 2430, AS/NZS 2381
Flammable liquids
determination, flash point, AS/NZS 2106
dispensing equipment, AS/NZS 2229
Flanges, metallic, AS/NZS 4331
Flashings
damp-proof courses and flashings, AS/NZS 2904
- methods of test, AS/NZS 4347
Flexible
cords (see Electric cables)
pipelines, buried, AS/NZS 2566
tube connectors for water supply, AS/NZS 3499
Flickermeter, AS/NZS 61000.4.15
Floor coverings
carpet cleaning maintenance, AS/NZS 3733
textile
- fibre content labelling, AS/NZS 2622
- installation practice, AS/NZS 2455
- tests & measurements, AS/NZS 2111
- test specimens, AS/NZS 2119
Floor polishers, electric, AS/NZS 3350.2.10, AS/NZS 60335.2.10, AS/NZS 60335.2.67, AS/NZS 60335.2.72
Flooring & floor covering (see also Carpets & carpeting)
particle board, AS/NZS 1860.1
resilient sheet and tiles, laying and maintenance, NZS/AS 1884
slip hazards, reduction, AS/NZS 3661
slip resistance, pedestrian, AS/NZS 4586
timber, profiles, NZS 3617
Fluorescent lamps
auxiliaries,
- general safety requirements, AS/NZS 60922, AS/NZS 61048
- performance requirements, AS/NZS 4782, AS/NZS 60901, AS/NZS 60923, AS/NZS 61049
ballasts for, AS/NZS 60929, AS/NZS 61347
glow starters, AS/NZS 60155
Font information format, AS/NZS 4159
Food (see also specific types)
microbiology, AS/NZS 1766, AS/NZS 4659
processing (see individual types of food)
safety bylaw, NZS 9201.24
waste disposers, AS/NZS 3350.2.16, AS/NZS 60335.2.16
Foot warmers, AS/NZS 3350.2.81, AS/NZS 60335.2.81
Footwear
protective, AS/NZS 2210
- firefighters, AS/NZS 4821
Forgings, copper and copper alloys, AS/NZS 1568
Forklifts (see Trucks, forklift)
Framed structures, safety, for tractors, NZS 5101
Freezers, AS/NZS 4474
Freight containers
corner fittings, AS/NZS 3711.3
dry bulk, AS/NZS 3711.7
fuel, portable, AS/NZS 2906
general purpose containers, AS/NZS 3711.4
terminology, AS/NZS 3711.2
Frozen foods (see specific types of food)
Fryers, deep fat, AS/NZS 3350.2.13, AS/NZS 60335.2.13
Frypans, electric, AS/NZS 3350.2.6, AS/NZS 60335.2.6
Fuel gases
CNG, LPG, AS/NZS 1425
hoses for, AS/NZS 1869
odorization, NZS 5263
Fuels (see also specific types)
CNG & LPG, NZS 5422
portable containers, AS/NZS 2906
Fume cupboards, laboratory, NZS 2243
Furnishings, care labelling, AS/NZS 1957
Furniture
bunk beds, AS/NZS 4220
fixed height chairs, AS/NZS 4688
school chairs, AS/NZS 4610
storage units, strength, durability, AS/NZS 4790
upholstered
- burning behaviour, AS/NZS 4088
- ignitability, AS/NZS 3744
wiring in, AS/NZS 4703
Fuses, low voltage
coordination between fuses & contactors, AS/NZS 61459
general requirements, AS/NZS 61269
Fusion-bonded epoxy coating, steel pipes, AS/NZS 3862
Fusion welded pressure vessels, NZS/BS 5500, NZS 1841

Galvanized coatings
steel wire, AS/NZS 4534
Galvanized mild steel wire, AS/NZS 3863
Galvanizing (see Hot-dip galvanizing)
Garage doors, AS/NZS 3350.2.95, AS/NZS 4504, AS/NZS 4505, AS/NZS 60335.2.95
Garden luminaires, AS/NZS 60598.2.7
Gas
appliance safety, NZS 5262, SNZ HB 5257.2
burning appliances, installation, NZS 5261
cylinders
- automotive, AS/NZS 3509
- identification markings, NZS 5807
electrical equipment for, AS/NZS 1826
detection, AS/NZS 4641, NZS 5263, AS/NZS 60079.29
distribution, NZS 5223, NZS 5258, NZS/AS 2885, AS/NZS 4645
industry audit protocol, NZS 5257.1
measurement, NZS 5259
metering, NZS 5259, AS/NZS 4944
odorization, NZS 5263
pipes, reticulation, NZS 5258, NZS 7646
Gaskets, preformed rubber, for buildings, NZS/BS 4255
Gate valves, NZS/AS 2638, NZS/BS 5163
Gates, drives for, AS/NZS 60335.2.103
Gender, inclusivity in job evaluation, NZS 8007
Generators, installation, AS/NZS 3010
Geographic information systems (GIS)
conceptual schema language, AS/NZS ISO 19103
conformance and testing, AS/NZS ISO 19105
coverage geometry, AS/NZS ISO 19123
data product specifications, AS/NZS ISO 19131
data quality, AS/NZS ISO 19138
encoding, AS/NZS ISO 19118
feature cataloguing, AS/NZS ISO 19110
functional standards, AS/NZS ISO 19120
geodetic codes & parameters, AS/NZS ISO 19127
geography mark-up language (GML), AS/NZS ISO 19136
imagery & gridded data, SAA/SNZ HB 255, AS/NZS ISO 19121
item registration, AS/NZS ISO 19135
latitude, longitude, altitude, AS/NZS ISO 6709
location-based services, AS/NZS ISO 19134
metadata, AS/NZS ISO 19115, AS/NZS ISO 19139
portrayal, AS/NZS ISO 19117
positioning services, AS/NZS ISO 19116
qualification of personnel, AS/NZS ISO 19122
quality
- evaluation, AS/NZS ISO 19114
- principles, AS/NZS ISO 19113
reference model, AS/NZS ISO 19101
rules for application, AS/NZS ISO 19109
rural addressing, AS/NZS 4819
services, AS/NZS ISO 19119
simple feature access, AS/NZS ISO 19125
spatial data transfer, AS/NZS 4270
spatial referencing, AS/NZS ISO 19111, AS/NZS ISO 19112, AS/NZS ISO 19137
temporal schema, AS/NZS ISO 19108
tracking and navigation, AS/NZS ISO 19133
web map server interface, AS/NZS ISO 19128
Geothermal heating equipment, NZS 2402P
Geothermal wells, deep, NZS 2403
Gerber method for fat in milk, NZS 501
GIS (see Geographic information systems)
GKS, NZS/ISO 7942
Glass
glossary of terms, AS/NZS 4668
insulating units, AS/NZS 4666
quality requirements, AS/NZS 4667
safety
- land vehicles, AS/NZS 2080
- ships' windows, NZS 5238
- side scuttles for ships, NZS 5237
Glass products, beads for pavement–marking materials, AS/NZS 2009
Glazed clay (see Ceramics)
Glazing
glossary of terms, AS/NZS 4668
in buildings, NZS 4223 (see also Windows)
insulating units, AS/NZS 4666
quality requirements, AS/NZS 4667
safety glazing materials, AS/NZS 2208
Glossary
building, NZMP 4212
network analysis, NZS/BS 4335
paint terms, AS/NZS 2310
timber, AS/NZS 4491
Gloves
examination AS/NZS 4011
protective, AS/NZS 2161
sterile, single use, AS/NZS 4179
Glue laminated timber, AS/NZS 1328
preservative treatment, AS/NZS 1604.5
GOSIP (Government Open Systems Interconnection Profile),
SAA/SNZ HB 55
basic reference model, AS/NZS 2777
directory, AS/NZS 4019
remote database access, AS/NZS 4379
Graphical Kernel System
computer graphics functional description, NZS/ISO 7942
language bindings
- Ada, NZS/ISO 8651.3
- FORTRAN, NZS/ISO 8651.1
- Pascal, NZS/ISO 8651.2
Graphics, computer
GKS, NZS/ISO 7942, NZS/ISO 8651
Graphical symbols (see Symbols, graphical)
Grass trimmers
electrical safety, AS/NZS 60335.2.94
safe working practice, AS/NZS 3576
Grillers, electric, AS/NZS 3350.2.6, AS/NZS 3350.2.9, AS/NZS 60335.2.6, AS/NZS 60335.2.9
Grinding wheels
plain, flanges for, NZS/BS 4581
segments & blocks, NZS/BS 4481
Ground surface indicators, tactile, AS/NZS 1428.4
Grouting
concrete, NZS 3109, NZMP 3100
testing, NZS 3112: Pt 4
Guards, machinery, NZS 5801
Guided industrial vehicles, NZS/AS 2359
Gutters, design of, AS/NZS HB 114
Gypsum plaster, NZS/AS 2592, AS/NZS 2588, AS/NZS 2589

Hair care appliances, AS/NZS 3350.2.8, AS/NZS 3350.2.23, AS/NZS 60335.2.23


Halls, public, fire precautions, NZS 9232
Handbook for third-party certification and accreditation guidelines, SANZ/SAA HB 18
Hand-held tools electric, portable, AS/NZS 3160, AS/NZS 60745
powder-actuated (PA), AS/NZS 1873
Handling & destruction of drugs, AS/NZS 4757
Handling of dangerous goods, AS/NZS 4681, AS/NZS 2022
Hard hats (see Helmets)
Hardboard (see Boards)
Harness and belts industrial, AS/NZS 1891, AS/NZS 4488, NZS 5811
marine, NZS 5823
webbing for, NZS 5432/AS 1753
Hawkers, model bylaw, NZS 9201.4
Hazardous areas
apparatus, AS/NZS 2229, AS/NZS 60079
- competencies for working with, AS/NZS 4761
classification, AS/NZS 2430, AS/NZS 2381, AS/NZS 60079.10, AS/NZS 61241
electrical safety
- gas, AS/NZS 1826
- coal mines, AS/NZS 2290
- spray painting booths, AS/NZS 4114
Hazardous substances (see Dangerous materials)
Hazard testing, fire, AS/NZS 60695
Headstones, NZS 4242
Healthcare
allied health services sector, NZS 8171
- chiropractic services, SNZ HB 8171.2
- physiotherapy services, SNZ HB 8171.1
alcohol and drug treatment, NZS 8157
day-stay surgery, NZS 8164
facilities, office based, AS/NZS 4815
family violence risk assessment, NZS 8006
fertility services, NZS 8181, SNZ HB 8181
mental, NZS 8134.1, NZS 8143, SNZ HB 8143
practice management systems, SNZ PAS 8170
records, NZS 8153
risk management, SAA/SNZ HB 228
rooms/office based surgery, NZS 8165
waste management, AS/NZS 3825, NZS 4304
Health network code of practice, SNZ HB 8169
Health & disability sector, NZS 8134, SNZ HB 8134, NZS 8158, SNZ HB 8158
Health & safety environment guide, SAA/SNZ HB 139
Hearing
acoustic measurement of musical pitch, NZS/ISO 16
aids, AS/NZS 1088
disabilities, textphones for, AS/NZS 4277
protection program, AS/NZS 1269.3
Heat detectors, NZS 4512
Heat exchangers, fan coil units, testing & rating, NZS/BS 4856
Heaters (see specific types: Space heaters, Immersion heaters, Water heaters, Boilers)
floor and ceiling, NZS 6110
room, AS/NZS 3102, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61, AS/NZS
60335.2.96
solid fuel, AS/NZS 2918, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- with electrical connections, AS/NZS 60335.2.102
unit, testing, NZS/BS 4856
Heating equipment
for breeding and rearing animals, AS/NZS 60335.271
geothermal, NZS 2402P
Heating tools, portable, AS/NZS 3350.2.45, AS/NZS 60335.2.45
Heavy vehicles, load anchorage points, NZS 5444
Hedge trimmers, AS/NZS 60745.2.15
Helicopters, noise management and land use, NZS 6807
Helmets, protective
ATV, NZS 8600
cricket, AS/NZS 4499
firefighters’, AS/NZS 4067
horse & pony riders', AS/NZS 3838
industrial, NZS 2264, AS/NZS 1801
methods of test, AS/NZS 2512
motor cyclists', NZS 1215, NZS 5430, AS/NZS 1698
occupational, AS/NZS 1800, AS/NZS 1801
pedal cyclists', AS/NZS 2063
vehicle users, NZS 5430, AS/NZS 1698
Hexagon socket screws & wrench keys, NZS/BS 4168
Hides
green, NZS 8404
treatment, grading, classification cured, NZS 8401
High chairs, safety, NZS/BS 5799
High level stop light, NZS 5461
High pressure gas pipelines, AS/NZS 4645, NZS 5223
High visibility clothing, NZS 5839, AS/NZS 1906.4, AS/NZS 4602
aviation, PAS 10
High voltage switches, AS/NZS 60265
Hoists (see Lifts)
Hose
air-brake, NZS/SAE J1402
gas, AS/NZS 1869
hose assemblies for air AS/NZS 2554
hydraulic brake, NZS/SAE J1401
reels fire, AS/NZS 1221
tanker, for petroleum products, NZS/BS 3492
vacuum brake, NZS/SAE J1403
Hospital equipment (see also Medical equipment)
anaesthetic machines, non electrical, AS/NZS 4059
beds, NZS 7121, NZS 7122, AS/NZS 3200.2.38
blood pressure monitoring equipment, AS/NZS 3200.2.30, AS/NZS 3200.2.34
cassettes for X-ray, AS/NZS 3821
cleaning, disinfecting & sterilizing, AS/NZS 4187, AS/NZS ISO 11137, AS/NZS 4815
containers, reusable for sharp items, AS/NZS 4261
- reprocessing, AS/NZS 4478
disinfecting, AS/NZS 4187
electron accelerators, AS/NZS 4434
gloves, sterile, AS/NZS 4179
intravenous devices (sterile)
- selection & preservation of water samples AS/NZS 2031
- single-use winged, AS/NZS 2485
- user-applied labels, AS/NZS 4375
lighting for medical tasks, AS/NZS 1680.2.5
sterilizing, AS/NZS 4187, AS/NZS 4815
- by radiation, AS/NZS ISO 11137
stretchers, NZS 1057
surgical equipment, AS/NZS 3200.2.2
technical management programs, medical devices, AS/NZS 3551
X-ray equipment for tomography, AS/NZS 3200.2.44
Hospitals
emergency power supplies, AS/NZS 3009
laboratories, quality and competence, NZS/ISO 15189
laundry practice, AS/NZS 4146
lighting for medical tasks, AS/NZS 1680.2.5
Hospitality industry, quality system guidelines, AS/NZS 3905.3
Hot-dip galvanized fabricated ferrous articles, AS/NZS 4680
Hotplates, electric, domestic, AS/NZS 3350.2.6, AS/NZS 60335.2.6
Hot-rolled steel
bars and sections, structural, AS/NZS 3679.1
flat products, AS/NZS 1594
plates, floorplates and slabs, AS/NZS 3678, AS/NZS 1594
tolerances, AS/NZS 1365
Hot water supply systems, AS/NZS 3500.4
energy consumption calculation, AS/NZS 4234
Household
appliances (see Electrical household appliances)
cleaning materials (see Cleaning materials)
electrical appliances, general requirements, AS/NZS 3350, AS/NZS 60335
equipment (see Cookers, Cooking appliances, Electrical household appliances)
- energy labelling, AS/NZS 4474, AS/NZS 2007.2
- marking, AS/NZS 4417
- measurement of standby power, AS/NZS 62301
performance of electrical appliances AS/NZS 2040
Houses
building contracts, NZS 3902
safe design, NZS 4102
Hydatids control, NZS 5102
Hydrants, underground, NZS/BS 750
Hyperdocuments, AS/NZS 4148
Hypermedia, AS/NZS 4148

Identification (see also Colours & colour codes)


threads in electrical cables, NZS/BS PD 2379
IEC, New Zealand's role, NZMP 6001
IGES, NZS/AS 3643.1
ILCOS (International lamp coding system), AS/NZS 4293, AS/NZS 61231
Illumination (see Lighting, Lamps)
Immersion heaters
fixed, AS/NZS 3350.2.73, AS/NZS 60335.2.73
portable, AS/NZS 3350.2.74, AS/NZS 60335.2.74
thermostats for, NZS 6214
Implants, for surgery, AS/NZS 2817
Incandescent lamps
MEPS requirements, AS/NZS 4934
safety, AS/NZS 60432
test methods, AS/NZS 4934
Inclined lifts, NZS/AS 1735.8
Index of New Zealand Standards, NZHB 100
Indexes for books, periodicals etc., BS 3700
Industrial
accident prevention (see Safety, industrial)
rope access systems, AS/NZS 4488
safety (see also Safety, industrial)
- belts and harness, AS/NZS 1891, AS/NZS 4488, NZS 5811
- mesh, AS/NZS 4389
- protective helmets, AS/NZS 1801
trucks (see Trucks)
Industrial, scientific & medical radio frequency equipment, AS/NZS CISPR 11
Infant radiant warmers, AS/NZS 3200.2.21
Infant's rocking cradles, AS/NZS 4385
Infection control, NZS 8134.3, NZS 8142, SNZ HB 8142
Information, geographic, AS/NZS ISO 19101, AS/NZS ISO 19105, AS/NZS ISO 19108, AS/NZS 19125
Information and documentation
Dublin Core metadata, AS/NZS ISO 15836
generic electronic document interchange, AS/NZS ISO 17933
guidelines, AS/NZS 999
information retrieval, AS/NZS 23950
international standard audiovisual number (ISAN), AS/NZS ISO 15706
international standard book numbers (ISBN), AS/NZS 1519
international standard identifier for libraries (ISIL), AS/NZS ISO 15511
international standard music work code (ISWC), AS/NZS ISO 15707
international standard recording code, AS/NZS ISO 5901
library statistics, AS/NZS ISO 4789
metadata in education, HB 256
permanence and durability, AS/NZS ISO 11798
records management, AS/NZS ISO 23081
vocabulary, AS/NZS ISO 5127
Information coding
bibliographic data element directory, AS/NZS 4450
electronic manuscript preparation and markup, AS/NZS 4449
pictures and audio for digital storage, AS/NZS 4230, SAA/SNZ MP74, AS/NZS 14496
Information interchange and instrumentation control
drug prescription, AS/NZS 4700
health level seven-HL7, AS/NZS 4700
magnetic tape
- unrecorded 12.7 mm (0.5 in) wide, AS/NZS 1011
OSI, basic reference model, AS/NZS 2777.1, AS/NZS 4196, AS/NZS 4197
representation of dates and times, NZS/ISO 8601, AS/NZS 3802
text communication, AS/NZS 4033
X.400 security, SAA/SNZ HB 74
Information processing (see also Data processing equipment)
bibliographic data element directory, AS/NZS 4450
coded representation of pictures, NZS/ISO/IEC 9282
consumer software packages, quality requirements & testing, AS/NZS 4366
data communication
- multilink procedures, NZS/ISO 7478
- X.25 connection mode network, AS/NZS 3604, AS/NZS 4095
DCE and DTE connectors
- 9-pin and 37-pin, AS/NZS 3612, AS/NZS 3512, AS/NZS 4157
- 15-pin, NZS/ISO 4903
database language SQL, AS/NZS 3968
electronic manuscript preparation and markup, AS/NZS 4449
equipment, interconnection of DTE, NZS/ISO TR 7477
local area networks, NZS/ISO-IEC 8802
network service definition, AS/NZS 2994
Open Systems Interconnection
- basic reference model, AS/NZS 2777, AS/NZS 4196, AS/NZS 4197, NZS/ISO/IEC 7498
- data link service definition, file protocol specification, AS/NZS 3646.4
- directory, AS/NZS 4019
- file service definition, AS/NZS 3646.3
- file transfer, access and management, AS/NZS 3646, AS/NZS 4218
- general introduction, AS/NZS 3646.1
- remote database access, AS/NZS 4379
- systems management overview, AS/NZS 3692
- virtual filestore definition, AS/NZS 3646.2
programming languages
- C++, AS/NZS 14882
- Fortran 90, AS/NZS 1486
SGML Document Interchange Format, NZS/ISO 9069
- support facilities, AS/NZS 3967
signal quality at DTE/DCE interfaces, AS/NZS 3618
software
- engineering, SWEBOK, AS/NZS ISO/IEC 19759
- measurement, AS/NZS 14143, AS/NZS 15939
- Petri nets, AS/NZS 15909
- product evaluation, AS/NZS 14598
systems
- Open Systems Interconnection: basic reference model, file transfer, access and management, AS/NZS 2777, AS/NZS
3646, AS/NZS 4218
text and office systems
- SGML, NZS/ISO 8879
- testing methodology, AS/NZS 4225
X.25 protocol, data terminal equipment, AS/NZS 3621
text communication, AS/NZS 4033
Information retrieval
bibliographic, AS/NZS 4450.3
service and protocol, AS/NZS 23950
Information security management, NZMP 6653, AS/NZS ISO/IEC 17799, AS/NZS ISO/IEC 27001, HB 231
Information technology
audio-visual coding, AS/NZS 14496
cabling, generic, for homes, AS/NZS ISO/IEC 15018
CASE selection, AS/NZS 14102
CDIF
- framework, AS/NZS ISO/IEC 15474, AS/NZS ISO/IEC 15475
- semantic metamodel, AS/NZS ISO/IEC 15476
computer graphics, NZS/ISO/IEC 8632
code of practice for security management AS/NZS ISO/IEC 17799
coding of moving pictures and associated audio, AS/NZS 4230
data descriptive file, for information interchange, AS/NZS 3654
digital compression of images, AS/NZS 4473
DTE data link procedures, AS/NZS 3512, AS/NZS 3621, AS/NZS 4157
equipment, AS/NZS 60950
font information interchange, AS/NZS, 4159
framework quality, AS/NZS 13236
generic coding of moving pictures, AS/NZS 13818
geographic information systems (GIS)
- quality principles, AS/NZS ISO 19113
- rural addressing, AS/NZS 4819
- simple feature access, AS/NZS ISO 19125
- spatial data transfer, AS/NZS 4270
- spatial referencing, AS/NZS ISO 19111
information resource dictionary system framework, AS/NZS 4101
integrated services digital network, AS/NZS 4102
International Standardized Profiles (ISP)
- AOM1n management communications, AS/NZS 4248
- document application profile, AS/NZS 4223.1
- enhanced document structure, AS/NZS 4246, AS/NZS 4247
- TB, TC, TD and TE connection-mode service, AS/NZS 4170
keyboard layouts, AS/NZS 4395
lifecycle processes, risk management, AS/NZS ISO/IEC 16085
multimedia objects, AS/NZS 14478, AS/NZS 15938
Open distributed processing, AS/NZS 13235, AS/NZS ISO/IEC 14750, AS/NZS ISO/IEC 14752, AS/NZS ISO/IEC 14753,
AS/NZS ISO/IEC 14769, AS/NZS ISO/IEC 14771, AS/NZS ISO/IEC 15414, AS/NZS ISO/IEC 15437, AS/NZS ISO/IEC
19500
OSI, Network layer, AS/NZS 4471
picture and audio
- coded representation, AS/NZS 4472
- generic coding, AS/NZS 13818
- multimedia objects, AS/NZS 14478
process assessment, AS/NZS ISO/IEC 15504
programming languages
- C++, AS/NZS 14882
- Fortran 90, AS/NZS 1486
quality service framework, AS/NZS 13236
security
- cryptographic modules, AS/NZS ISO/IEC 19790
- key management, AS/NZS ISO/IEC 11770
- lower layers, AS/NZS 13594
- techniques, AS/NZS ISO/IEC 9798, AS/NZS ISO/IEC 15443, AS/NZS ISO/IEC 18028, AS/NZS ISO/IEC 18033, AS/NZS
ISO/IEC 18044
SGML support facilities, AS/NZS 4097
software
- asset management, AS/NZS ISO/IEC 19770
- engineering, AS/NZS ISO/IEC 15289, AS/NZS ISO/IEC 16326, AS/NZS ISO/IEC 18019, AS/NZS ISO/IEC 19759,
AS/NZS ISO/IEC 20968, AS/NZS ISO/IEC 23026, AS/NZS ISO/IEC 25000, AS/NZS ISO/IEC 25051, AS/NZS ISO/IEC
25062, AS/NZS ISO/IEC 90003
- maintenance AS/NZS 14764
- measurement, AS/NZS 14143, AS/NZS 14756, AS/NZS 15939
- Petri nets, AS/NZS 15909
- product evaluation, AS/NZS 14598
- quality, AS/NZS 9126
- user documentation process, AS/NZS ISO/IEC 15910
system & software integrity, AS/NZS 15026
systems life cycle processes, AS/NZS 15288, AS/NZS ISO/IEC 19760
telecommunications
- DTE data link procedures, AS/NZS 3512, AS/NZS 3621, AS/NZS 4157
- information exchange, AS/NZS 4104, AS/NZS 4107, AS/NZS 4136, AS/NZS 4147, AS/NZS 4210
- pathways & spaces for commercial buildings, AS/NZS 3084
- PISN, AS/NZS 4477
- protection of, HB 219, AS/NZS 3835
text communication, AS/NZS 4033
text & office systems
- document filing & retrieval, AS/NZS 4167
- office document & architecture and interchange format, AS/NZS 4225
Universal multiple-octet coded character set (UCS), AS/NZS 4189
Information technology equipment
immunity characteristics, AS/NZS CISPR 24
radio disturbance characteristics, AS/NZS CISPR 22
Infra-red skin treatment appliances, safety, AS/NZS 3350.2.27, AS/NZS 60335.2.27
Infusion pumps, AS NZS 3770
Initial graphics exchange specification, computer graphics, NZS/AS 3643.1
Insect electrocutors, AS/NZS 3350.2.59, AS/NZS 60335.2.59
Inspection
bodies, AS/NZS ISO/IEC 17020
residential property, NZS 4306
Installation couplers, AS/NZS 61535
Instantaneous water heaters, AS/NZS 3350.2.35, AS/NZS 60335.2.35
Instruments, measuring
calibration & checking, SAA/SNZ HB 86
for constructional work, NZS 6504
laboratories, general requirements, NZS ISO/IEC 17025
Instrumentation, cables, multicore and twisted pair, AS/NZS 5000.3
Insulating
concrete, NZS 3152
glass units, AS/NZS 4666
mats, AS/NZS 2978
mouldings, AS/NZS 3121
Insulation
electrical, materials for, AS/NZ 3808
thermal, in buildings, NZS 4222, NZS 4246
Insulators
bushings, for alternating voltage above1000 V, AS/NZS 60137
composite for overhead powerlines, AS/NZS 4435
Interactive voice response systems, AS/NZS 4263
Interference (see Electromagnetic interference)
suppression, television, NZS 6605
Interior lighting design, ASNZS 1680, NZS 6703
Interloan applications, AS/NZS 4450.1
Internal combustion engines
fuel for, LPG, CNG, AS/NZS 1425
reciprocating, performance, NZS/ISO 3046
International lamp coding system (ILCOS), AS/NZS 4293
International Standardized Profiles (ISP)
document application profile, AS/NZS 4223.1
enhanced document structure, AS/NZS 4246, AS/NZS 4247
Intra-uterine contraceptive devices, NZS 7102
Intravenous devices (sterile)
single-use winged, AS/NZS 2485
user-applied labels, AS/NZS 4375
Intruder alarm systems, AS/NZS 3749, NZS 4301, NZS/AS 2201
Inverters, portable, AS/NZS 4763
Iodine, water tablets, AS/NZS 4609
lodophors, dairy, NZS 8341
Iron, methods of analysis, AS/NZS 1050
Iron and steel structures
cold formed, AS/NZS 4600
protection against atmospheric corrosion, AS/NZS 2312, AS/NZS 2728
Irons, electric, AS/NZS 3350.2.3, AS/NZS 60335.2.3, AS/NZS 3350.2.44, , AS/NZS 60335.2.44
Irrigation systems, sprinkler, NZS 5103
ISO 9001
comparison, SAA/SNZ HB 90.0
guidelines on, AS/NZS ISO 15161
ISO metric, hexagon
coach screws, AS/NZS 1393
machine screws, AS/NZS 1427
socket set screws, AS/NZS 1421
Isolators, pharmaceutical, AS/NZS 4273

Jacks, vehicle, AS/NZS 2693


Job
evaluation, gender inclusivity in, NZS 8007
transfer and manipulation
- protocols, OSI, AS/NZS 3698
- service, OSI, AS/NZS 3697
Joinery profiles, NZS 3610
Joint rings, elastomeric for pipes, NZS/BS 2494
Jugs, electric, AS/NZS 3350.2.15, AS/NZS 60335.2.15

Kettles, electric, AS/NZS 3350.2.15, AS/NZS 60335.2.15


Keyboard layouts, AS/NZS 4395
Kitchen assemblies
domestic, AS/NZS 4386
methods of test, AS/NZS 4387
Kitchen machines, AS/NZS 3350.2.14, AS/NZS 60335.2.14
L

Labelling, textiles, AS/NZS 2392


Labels, dangerous materials transportation, NZS 5433
Laboratory
bodies performing inspection, AS/NZS ISO/IEC 17020
general requirements, AS/NZS 2982.1, NZS ISO/IEC 17025
safety, AS/NZS 2243
Ladders
fixed, NZS/AS 1657
portable, AS/NZS 1892
wood, NZS 3609
Laminated veneer lumber, AS/NZS 4357
methods of test, AS/NZS 2098
Laminates
plastic sheet, AS/NZS 2924
wood, glue for, AS/NZS 1328
Lamp caps & holders, bayonet type, AS/NZS 3117, AS/NZS 61184
Lamp coding system, AS/NZS 4293
Lampholders, Edison screw, AS/NZS 3140
Lamps (see also Lighting fittings)
auxiliaries
- general safety, AS/NZS 60922, AS/NZS 61048
- performance, AS/NZS 60923, AS/NZS 61047, AS/NZS 61049
ballasts
- for tubular fluorescent, AS/NZS 60929, AS/NZS 61347
coding system, AS/NZS 4293
controlgear, AS/NZS 61347
glow starters, AS/NZS 60155
incandescent
- MEPS requirements, AS/NZS 4934
- safety, AS/NZS 60432
- test methods, AS/NZS 4934
self ballasted
- general requirements, AS/NZS 60969
- MEPS requirements, AS/NZS 4847
- safety requirements, AS/NZS 60968
- test methods, AS/NZS 4847
standards and brackets, portable, AS/NZS 60598.2.4, AS/NZS 3128
traffic hazard, NZS 5415
Land, subdivision, NZS 4404
Land drainage works, model bylaw, NZS 1711
Laser equipment, AS/NZS 3200.2.22, AS/NZS 11553, AS/NZS ISO 13694
Laser safety, AS/NZS 1337, AS/NZS 2211, NZS 5821, AS/NZS 11553
- health care, AS/NZS 4173
Latches for doors, NZS/BS 5872
Latex barriers, sexual use, AS/NZS 4592
Laundry
practice, AS/NZS 4146
troughs and tubs, AS/NZS 1229
Lawnmowers, electric, AS/NZS 60335.2.77
Lawn
scarifiers, electric, AS/NZS 60335.2.92
trimmers, electric, AS/NZS 60335.2.91
Lead sheaths for cables, AS/NZS 2893
Lead-acid batteries, NZS 6102, AS/NZS 4029
Leads, electric (see Flexible conductors)
Legal sector, risk management, HB 296
Legwear, protective, chain saw users, AS/NZS 4453.3
Lenses, ophthalmic, materials, NZS/BS 3062
Letter boxes, AS/NZS 4253
Library collections of standards, see introductory pages
Life cycle assessment
costing, AS/NZS 4536
environmental management, AS/NZS 14040
Lifejackets & buoyancy aids, NZS 5823
Lift trucks (see Trucks, forklift)
Lifts
escalators & moving walks, NZS/AS 1735
for disabled people, AS/NZS 3856
inclined, NZS/AS 1735
installations, safe working on, AS/NZS 4431
non-domestic passenger and goods, NZS 4332
Light timber frame buildings, code of practice, NZS 3604
Light trailers, NZS 5467
Lighting
christmas trees, AS/NZS 60598.2.20
design, interior, AS/NZS 1680, NZS 6703
electrical equipment, AS/NZS 4783
glow starters, AS/NZS 60155
high level stop light, NZS 5461
illuminated flashing arrow signs, AS/NZS 4192
interior, AS/NZS 1680, NZS 6703
pedal cycles, NZS 5441
road, AS/NZS 1158
Lighting systems
emergency, AS/NZS 2293
interior, AS/NZS 1680, NZS 6703
performance, AS/NZS 3827
street and highway, AS/NZS 1158, NZS 6701
Lightning protection, AS/NZS 1768
Lightweight concrete, insulating and structural, NZS 3152
Line isolation, optocoupler, AS/NZS 4162
Linear shrinkage, test for soils, NZS 4402.2.6
Liquid limit, test for soils, NZS 4402.2.2
Liquid petroleum gas (see LPG)
Liquids
appliances for heating, AS/NZS 3350.2.15, AS/NZS 60335.2.15
concrete structures for storage, NZS 3106
Liquor control, Model general bylaw, NZS 9201.29
Livestock
crates for transportation, NZS 5413
electric current, effects of, AS/NZS 60479
Load anchorage points, NZS 5444, AS/NZS 4384
Load restraint assemblies, webbing, AS/NZS 4380
Loadings, building design (see Design loadings)
Loads on buried concrete pipes, AS/NZS 3725
Lobsters, processing of, NZS 8406
Local Area Networks (LAN)
building cabling, AS/NZS 3080, AS/NZS 3085, AS/NZS IEC 61935
medium access control addresses, AS/NZS 4228
X-25 logical link control protocol, AS/NZS 4166
Local Government
flood risk, NZS 9401
risk management, SNZ HB 4360
service delivery, SNZ HB 9213
Locks, doors, NZS/BS 5872
LOCODE, SAA/SNZ MP73
Loudness, acoustic measurement of musical pitch, ISO 16
Low styrene resins, AS/NZS 4585
Low voltage contactors, NZS/AS 1029
Low voltage fuses
coordination between fuses & contactors/motor starters, AS/NZS 61459
general requirements, AS/NZS 60269
Low voltage switchgear and controlgear
controller-device interfacers, AS/NZS 62026
distribution boards, AS/NZS 3439.3
essential safety, AS/NZS 3820
outdoor, AS/NZS 3439.5
type-tested, AS/NZS 3439.1
Low-carbon steels, wire for reinforced concrete, NZS 4671
LPG
dispensing equipment, AS/NZS 2229
fuel vessels, for automotive use, AS/NZS 3509
internal combustion engines, AS/NZS 1425
in boats, NZS 5428
in caravans, NZS 5428
specification for, NZS 5435
storage and handling, AS/NZS 1596
Luminaires (see also Lighting fittings), AS/NZS 60598
international coding system, AS/NZS 4293

Machine guards, NZS 5801


Machine screws, ISO, metric, AS/NZS 1427
Machine tool tables, NZS 5204
Magnetic tapes, unrecorded, AS/NZS 1011
Mailboxes, AS/NZS 4253
Maintenance shafts
polyethylene, AS/NZS 4798(Int)
unplasticized PVC, AS/NZS 4999
Mammographic X-ray, AS/NZS 3200.2.45
Management
business continuity, SAA/SNZ HB 221
environmental
- life cycle assessment, AS/NZS 14040, AS/NZS 14041
- performance evaluation, AS/NZS 14031
information security, AS/NZS ISO/IEC 17799, AS/NZS ISO/IEC 27001, HB 231
quality and quality systems, AS/NZS ISO 9000, AS/NZS 9004
system integration, AS/NZS 4581
Marine
plywood, AS/NZS 2272
safety harnesses and lines, NZS 5823
search and rescue radar transponders, AS/NZS 4432
survivor locating systems (MSLS), AS/NZS 4869
Marking (see also Colour codes)
fire hydrant locations, NZS 4501
identification, industrial use, NZS 5807
Marking tape, underground, AS/NZS 2648, AS/NZS 4275
Masonry buildings, construction
coatings, AS/NZS 4548
code of practice, NZS 4229
design of structures, NZS 4230
materials & workmanship, NZS 4210, AS/NZS 2699
Masonry units, concrete, AS/NZS 4455, AS/NZS 4456
Masonry veneer wall cladding, SNZ HB 4236
Masonry wall ties, NZS 3604, NZS 4210, AS/NZS 2699
Massage appliances, AS/NZS 3350.2.32, AS/NZS 60335.2.32
Mastic asphalt, for building, NZS/BS 6925
Materials
handling (see also Transportation)
- pallets, NZS 2010
thermal insulation of buildings, AS/NZS 4859, NZS 4246
toxic substances, AS/NZS 4452
Maximum dry density of soil, NZS 4402.4.2.2
Measurement
building works, NZS 4202
civil engineering quantities, NZS 4224
IT software, AS/NZS 14143, AS/NZS 15939
noise, NZS 6801, NZS 6802, AS/NZS 1269.1, AS/NZS ISO 717, AS/NZS 2499
radio disturbance characteristics of lighting, AS/NZS CISPR 15, AS/NZS CISPR 12
Sl units, NZS 6501
wool
- bulk of, NZS 8716
- calculation of yield, AS/NZS 1362
- colour of, NZS 8707
- determination of vegetable matter base, AS/NZS 1134
- mean fibre diameter, AS/NZS 1133
- preservation, AS/NZS 1809
- staple length and strength, AS/NZS 2810
Measuring equipment, AS/NZS ISO 10012
calibration & checking, SAA/SNZ HB 86
for constructional work, NZS 6504
laboratories, general requirements, NZS ISO/IEC 17025
Meat
classification of carcasses, NZS 8403
offal treatment units, NZS 5102
Mechanical drawing practice, NZS/AS 1100
Mechanical refrigeration, AS/NZS 1677
Mechanical stress grading, timber, AS/NZS 1748, AS/NZS 2878, NZS 3618, AS/NZS 4490
Medical & accident clinics, NZS 8151
Medical equipment (see also Hospital equipment)
anaesthetic machines, non electrical, AS/NZS 4059
cardiac pacemakers, AS/NZS 3200.2.31
catheters, urethral, polymer, AS/NZS 2696
cleaning, disinfecting and sterilizing, AS/NZS 4187, AS/NZS ISO 11137, AS/NZS 4815
containers, reusable, for sharp items, AS/NZS 4261
- reprocessing, AS/NZS 4478
dento-maxillofacial X-ray equipment, AS/NZS 3200.2.201
disinfecting and sterilizing, AS/NZS 4187, AS/NZS ISO 11137, AS/NZS 4815
electrical equipment, AS/NZS 3200, AS/NZS 4513, AS/NZS 4537
- anaesthetic workstation, AS/NZS 3200.2.13
- blood pressure monitoring equipment, AS/NZS 3200.2.30, AS/NZS 3200.2.34
- cardiac pacemakers, AS/NZS 3200.2.31
- diagnostic ultrasonic equipment, AS/NZS 4194, AS/NZS 4374
- electrocardiographic equipment, AS/NZS 3200.2.27
- electromyographs, AS/NZS 3200.2.40
- electro-optical x-ray image intensifiers, AS/NZS 4356
- electron accelerators, AS/NZS 4434
- endoscopic equipment, AS/NZS 3200.2.18
- extracorporeally induced lithotripsy, AS/NZS 3200.2.36
- gamma beam therapy, AS/NZS 3200.2.11
- graphic symbols, AS/NZS 4334
- hospital beds, AS/NZS 3200.2.38
- mammographic X-ray, AS/NZS 3200.2.45
- medical imaging, AS/NZS 4184
- programmable systems, AS/NZS 3200.1.4
- radionuclide calibrators, AS/NZS 4354
- radionuclide imaging devices, AS/NZS 4378, AS/NZS 4545
- radiotherapy dosemeters, AS/NZS 3200.9
- radiotherapy equipment, AS/NZS 4495
- radiotherapy simulators, AS/NZS 3200.2.29, AS/NZS 4213
- safe use in patient care, AS/NZS 2500
- surgical equipment, AS/NZS 3200.2.2
- ultrasonics, AS/NZS 3200.2.5, AS/NZS 4188, AS/NZS 4190, AS/NZS 4374, AS/NZS 4713
- X-ray equipment for interventional procedures, AS/NZS 3200.2.43
- X-ray equipment for tomography, AS/NZS 3200.2.44
gloves, sterile, AS/NZS 4179
intravenous devices (sterile)
- single-use winged, AS/NZS 2485
- user-applied labels, AS/NZS 4375
ophthalmic, AS/NZS 15004
risk management, AS/NZS 4810
sterilizing, AS/NZS 4187, AS/NZS ISO 11137, AS/NZS 4815
technical management of, AS/NZS 3551
urethral catheters, polymer, AS/NZS 2696
Medical imaging departments, evaluation and testing, AS/NZS 4184
Medical laboratories, quality and competence, NZS/ISO 15189
Meetings, model standing orders
boards, councils and committees, NZS 9204
territorial authorities, regional councils, community boards, NZS 9202
Membranes and underlays, NZS 2295, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
Mental health, NZS 8134.1, NZS 8143, SNZ HB 8143
Mercury, in fluorescent lamps, AS/NZS 4782.3(Int)
Metal, stone (see Aggregates)
Metal-arc welding (see Welding)
Metal-sheathed cables, AS/NZS 60702
Metallic flanges, AS/NZS 4331
Metallic pipelines, electrical hazards, AS/NZS 4853
Metals (see Iron and steel, Non-ferrous, and specific metals)
Meter boxes, electrical, domestic, NZS 6206
Metering devices, CNG refuelling stations, NZS 5425
Meters, gas, NZS 5259
Methods of sampling and testing road aggregates, NZS 4407
Metric bolts and screws
hexagon
- socket set screws, AS/NZS 1421
machine, AS/NZS 1427
Metric cup head bolts, AS/NZS 1390
Metric units, NZS 6501
Metrology, AS/NZS ISO 10012
Microbial control in air handling and water systems, AS/NZS 3666, SAA/SNZ HB 32
Microbiological surveillance of flexible hollow endoscopes, SNZ HB 8149
Microbiology water examination, AS/NZS 4276
Micrographics
characteristics, AS/NZS 4579
measurement, AS/NZS 4578
operating procedures, AS/NZS 4589
performance, AS/NZS 4577
Microwave ovens, AS/NZS 2895, AS/NZS 3350.2.25, AS/NZS 60335.2.25, AS/NZS 60335.2.90
Mild steel (see Low-carbon steels)
Milk
analysis methods, NZS 2246
boxes, AS/NZS 4253
freezing point, NZS/ISO 5764
rennet coagulation power, NZS 8311
testing, Gerber method, NZS 501
Milking machines, AS/NZS 60335.2.70
Mineral-insulated cables, metal-sheathed, AS/NZS 60702
Minimum dry density of soil, NZS 4402.4.2.1
Mining (see Electric cables)
Mining equipment,
diesel engines, explosion protected, AS/NZS 3584, MP 87
electrical equipment, AS/NZS 1747, AS/NZS 2290, AS/NZS 4871, AS/NZS 2081, MP 87
remote controls, AS/NZS 4240
wire ropes, AS/NZS 4812
Mobile communication equipment, installation in vehicles, AS/NZS 4346
Mobile shelving for archives, libraries & museums, SAA/SNZ HB 96
Model bylaws
catchment authorities, NZS 9203
drainage, NZS 1711
farm buildings, NZS 1900 Chapter 11.2
fire precautions in cinemas, theatres, places of assembly, NZS 9232
general, NZS 9201
regional water boards, NZS 9203
standing orders
- for boards, councils, committees, NZS 9204
- for territorial authorities NZS 9202
Molluscs, handling, processing, storage, distribution, NZS 8405, AS/NZS 1766.3.5
Monuments, cemetery, NZS 4242
Mortars, sands for, NZS 3103
Motor caravans, self-containment, NZS 5465
Motor-compressors, electrical safety, AS/NZS 3350.2.34, AS/NZS 60335.2.34
Motor cyclists' helmets, NZS 1215, AS/NZS 1698
methods of test, AS/NZS 2512
Motor mowers (see Mowers)
Motor racing, safety helmets, NZS 5430, AS/NZS 1698
methods of test, AS/NZS 2512
Motor vehicles
brake fluids, AS/NZS 1960
brake testing equipment, AS/NZS 4613
cargo barriers for occupant protection, AS/NZS 4034
cargo restraint
- anchorages and anchor points, AS/NZS 4384
- webbing systems, AS/NZS 4380
driving controls, disabled persons, NZS 5832
engine coolant, AS/NZS 2108
‘I’ beam steer axle camber adjustment, AS/NZS 4737
immobilizers, AS/NZS 4601
ramps
- disabled persons, AS/NZS 3856
- portable, AS/NZS 2640
seat belts, AS/NZS 2596, AS/NZS 4475, NZS 5401
- for children, AS/NZS 1754, AS/NZS 3629, AS/NZS 4370,
- webbing for, AS/NZS 4475, NZS 5432/AS 1753
tyres
- inflation pressure, AS/NZS 1268
- retreading, AS/NZS 3889, NZS 5423
Mouldings
insulating, AS/NZS 3121
profiles (wood), NZS 3610
Mowers, electric, AS/NZS 60335.2.77
MPEG, system layer coding, AS/NZS 4230
Mulches, NZS 4454
Multilingual plane, AS/NZS 4189
Multimedia IT graphics and objects, AS/NZS 14478
Multiple-octet coded character set, AS/NZS 4189
Mussels, processing, NZS 8405

National plumbing and drainage code, AS/NZS 3500


National timber grading rules (New Zealand), NZS 3631
Natural gas
cylinders, automotive, NZS 5454
distribution networks, AS/NZS 4645
odorization, NZS 5263
reticulated, NZS 5442
Natural ventilators, AS/NZS 4740
Network analysis, glossary, NZS/BS 4335
New Zealand electrical requirements & approvals, AS/NZS 3000, AS/NZS 4417
Night clothes, children (see Clothing)
Night store heaters, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
Nippers and pliers, AS/NZS 4056
Nocturnal enuresis conditioning equipment, AS/NZS 2394
Noise management,
helicopter landing areas, NZS 6807
occupational, AS/NZS 1269
Noise measurement
airports, NZS 6805
auditory assessment, AS/NZS 1269.4
construction, demolition works, NZS 6803
control, AS/NZS 1269.2
environmental, NZS 6802
methods, NZS 6801, AS/NZS 2499
occupational, AS/NZS 1269.1
port noise, NZS 6809
sound insulation in buildings, AS/NZS ISO 717
Nuisances, model bylaw, NZS 9201 Chapter 11
Nuts
BS Whitworth thread, AS/NZS 2451
unified hexagon, AS/NZS 2465

Occupational diving, AS/NZS 2299


Occupational environment
eye protection, AS/NZS 1336
guide, SAA/SNZ HB 139
noise, AS/NZS 1269
OHSMS, AS/NZS 4804, NZS 4801
safety mesh, AS/NZS 4389
safety signs, NZS/AS 1319
Occupational health and safety systems, AS/NZS 4804, NZS 4801
Office based health care facilities, AS/NZS 4815
Office desks, AS/NZS 4442
Office panels, workstations, AS/NZS 4443
Open Systems Interconnection
Abstract Syntax Notation One (ASN.1)
- basic encoding rules, AS/NZS 8825
- specification, AS/NZS 8824
addressing tutorial, SAA/SNZ HB 68
alarm reporting function, AS/NZS 4152.4
attributes for representing relationships, AS/NZS 4152.3
basic reference model, AS/NZS 2777, NZS/ISO/IEC 7498
common management protocol, AS/NZS 3964
conformance testing, AS/NZS 4103, AS/NZS 4150
connection mode, AS/NZS 4210
connection mode network service, AS/NZS 4099
connection mode network using X.25, AS/NZS 3604, AS/NZS 4095
connection mode transport service, AS/NZS 4229.1
- requirements for CSMA CD local area networks, AS/NZS 4229.2
- X.25 end system, AS/NZS 4229.5
directory, AS/NZS 4019
event report management function, AS/NZS 4152.5
file protocol specification, AS/NZS 3646.4
- LOTOS definition, AS/NZS 4165
file service definition, AS/NZS 3646.3
file transfer, access and management, AS/NZS 3646, AS/NZS 4218
Interlibrary loan application protocol, AS/NZS 4197
International Standardized Profiles (ISP)
- AOM1n management communications, AS/NZS 4248
- document application profile, AS/NZS 4223.1
- enhanced document structure, AS/NZS 4246, AS/NZS 4247
- TB, TC, TD and TE connection-mode service, AS/NZS 4170
ISDN, provision of network service, AS/NZS 4099
local area networks, AS/NZS 4094
log control function, AS/NZS 4152.6
LOTOS, session protocol, AS/NZS 4206
LOTOS, session service, AS/NZS 4207
management information
- structure, AS/NZS 4151, AS/NZS 4152
- within operations of network layer, AS/NZS 4231
network layer
- definition of relaying functions, AS/NZS 4209
- protocol specification, AS/NZS 4093
- security protocol, AS/NZS 4471
network service definition, AS/NZS 2994
object management function, AS/NZS 4152.1
protocol, session mapping changes, AS/NZS 4105
protocol combinations, AS/NZS 4107
protocol specification, AS/NZS 4093
registration authorities
- procedures for operation, AS/NZS 4153
remote database access, AS/NZS 4379
security audit trail function, AS/NZS 4152.8
service definition, AS/NZS 4106
state managemen1t function, AS/NZS 4152.2
system description technique, LOTOS, AS/NZS 4199
test suite structure and test purposes for the
presentation protocol, AS/NZS 4222.1
transport protocol identification mechanism, AS/NZS 4245
- LOTOS description, AS/NZS 4164
tutorial on naming and addressing, SAA/SNZ HB 68
virtual filestore definition, AS/NZS 3646.2
vocabulary, NZS/SAA MP 62
Open Systems Interconnection Profile, Government (GOSIP), SAA/SNZ HB 55
Ophthalmic instruments, AS/NZS ISO 15004
Optical Instruments, AS/NZS 11990, AS/NZS ISO 13694
Organic matter content tests for soils, NZS 4402.3.1
Organic production, NZS 8410
Orthopaedic implants, AS/NZS 2817
Outdoor
recreation symbols, NZS 8603
visitor structures, SNZ HB 8630
Outlet devices, portable, electric, AS/NZS 3105
Ovens (see also Cookers and Microwave ovens)
electric, AS/NZS 3350.2.9, AS/NZS 60335.2.9, AS/NZS 60335.2.90
Overcurrent circuit breakers, miniature, AS/NZS 3111
Overhead power-line fittings (see Power lines)
Oysters, processing, NZS 8405

Packaging
child-resistant, NZS 5825
materials, polyethylene film, NZS 7651
Packet layer conformance test suite, AS/NZS 3621, AS/NZS 3512, AS/NZS 4157
Paging service, radiocommunications, AS/NZS 4769
Painting, buildings, practice and materials, AS/NZS 2311
Paints
colours for specific purposes, NZS 7702
glossary, AS/NZS 2310
methods of test, AS/NZS 1580
roadmarking, AS/NZS 4049
steel structures, AS/NZS 3750
Pallets, handling, NZS 2010
Panels (see Boards)
Paper
APPITA tests, NZS/AS and AS/NZS 1301
for MICR encoded documents, NZS/AS 2277
school stationery, NZS 8132
Paper and pulp tests, NZS/AS and AS/NZS 1301
Paper products, building
breather, NZS 2295, AS/NZS 4200, AS/NZS 4201
waterproof, NZS/BS 1521
Parking facilities, off street, AS/NZS 2890.1
Parks, model bylaw, NZS 9201.2
Particle board flooring, AS/NZS 1860.1
Particle size distribution, tests for soils, NZS 4402.2.81
Passenger lifts for private residence, AS/NZS 1735.18
Passenger vehicles, new tyres, NZS 5453
Paua, processing, NZS 8405
Pavement marking, glass beads, AS/NZS 2009
Paving, interlocking concrete, NZS 3116
Pedal bicycles
child carrier seats for, AS/NZS 4287
lighting & retroreflectors, NZS 5441
safety requirements, AS/NZS 1927
Pedestrian-crossing lights, NZS 6701
Pedestrian
lighting, AS/NZS 1158
slip resistance, AS/NZS 4586, AS/NZS 4663
surfaces, AS/NZS 3661
Penetration resistance of soil
cone or friction cone method, NZS 4402.6.5.3
hand method, dynamic cone pentrometer, NZS 4402.6.5.2
standard penetration test, NZS 4402.6.5.1
Perambulators (see Prams & pushchairs)
Percolators, electric, AS/NZS 3350.2.6, AS/NZS 60335.2.6
Petroleum liquids and gases, measurement, data transmission, NZS/ISO 6551
Petroleum liquids transportation pipelines, NZS 5223, NZS/AS 2885
Pharmaceutical isolators, AS/NZS 4273
Photovoltaic arrays, installation, AS/NZS 5033
pH value, tests for soils, NZS 4402.3.3
Piecarts, model bylaw, NZS 9201.24
Piles, timber, load bearing, NZS 3605
Pipe fittings (see also Pipes & fittings)
cast copper, NZS/BS 143, 1256
cast iron, malleable, NZS/BS 143, 1256
cast iron pipe, AS/NZS 2544
ductile iron, AS/NZS 2280
polyethylene
- hot and cold, NZS/AS 2537
- drainage & sewerage, AS/NZS 5065
Pipe threads, NZS/BS 21
Pipelines & piping systems
buried, flexible, AS/NZS 2566
cement mortar lining, AS/NZS 1516
ferrous, for land boilers, NZS/BS 806
flexible, buried, AS/NZS 2566
gas, high pressure, AS/NZS 4645, NZS 5223
identification, NZS 5807
petroleum liquids transportation, NZS 5223, NZS/AS 2885
thermal insulating materials, NZS/BS 5422
Pipes & fittings (see also Tubes)
ABS pressure pipes & fittings, AS/NZS 3518
concrete, precast drain and pressure, AS/NZS 4058
ferrous, for land boilers, NZS/BS 806
gas, high pressure, AS/NZS 4645, NZS 5223
installation, AS/NZS 2032
loads on buried pipes, AS/NZS 3725
marking to show contents, NZS 5807
oriented PVC (PVC-O), for pressure applications, AS/NZS 2032, AS/NZS 4441, AS/NZS 4765
polybutylene (PB) pipe systems, AS/NZS 2642
polyethylene
- blue, underground, for potable water, NZS 7610
- coating systems, AS/NZS 1518
- cold water, NZS 7601, NZS 7602, AS/NZS 2492, NZS/AS 2537
- drainage & sewerage, AS/NZS 5065
- fittings, for pressure applications, AS/NZS 4129
- gas, NZS 7646
- hot water, AS/NZS 2492, NZS/AS 2537
- installation, AS/NZS 2033
- pressure applications, AS/NZS 4130
polypropylene, AS/NZS 5065
pressure cycling resistance AS/NZS 3707
PVC
- drain, waste and vent applications, AS/NZS 1260, AS/NZS 4401
- for pressure applications, AS/NZS 1477, AS/NZS 4441, AS/NZS 4765
- installation, AS/NZS 2032
- methods of test, AS/NZS 1462
- modified, AS/NZS 4765
soil & ventilating
- underground drain, AS/NZS 1260
- waste and ventilating, AS/NZS 1260
solvent cement for, AS/NZS 3879
steel
- carbon, for pressure, NZS/BS 3601
- helical seam corrugated steel, NZS 4405, NZS 4406
- welded for water, sewage and medium pressure gas, NZS 4442
stormwater, AS/NZS 1254
surface water, AS/NZS 1254
Pipi, processing of, NZS 8405
Piping systems (see Pipelines & piping systems)
Plant in buildings, seismic resistance, NZS 4219
Plasterboard (see Boards)
Plastering
cement plasters, NZS 4251.1
sand, NZS 3103
solid, code of practice, NZS 4251
Plastic
ladders, portable, AS/NZS 1892
roof materials, AS/NZS 4256, AS/NZS 4257, AS/NZS 1562
- resistance to impact, AS/NZS 4040
Plastic limit, test for soils, NZS 4402.2.3
Plasticity index, test for soils, NZS 4402.2.4
Plastics
conduit electrical, rigid PVC, AS/NZS 1462, AS/NZS 2053
glass filament reinforced, tests, AS/NZS 3572
test method
- determination combustion, AS/NZS 2122
- ultraviolet lamps, AS/NZS 2433
Platforms, fixed, NZS/AS 1657
Playgrounds and playground equipment, NZS 5828, SNZ HB 5828
Pliable building membranes & underlays, NZS 2295, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
Pliers and nippers, AS/NZS 4056
Plugs and socket-outlets, AS/NZS 3112, AS/NZS 60320
approval and test specification, AS/NZS 3123
in installation wiring systems, AS/NZS 3131
Plywood
construction, AS/NZS 2269
exterior, AS/NZS 2271
interior, AS/NZS 2270
marine, AS/NZS 2272
methods of sampling, AS/NZS 2097
methods of test, AS/NZS 2098
Pneumatic tyres
inflation pressure, AS/NZS 1268
new, truck & bus, AS/NZS 2230
Poles
concrete, for electrical transmission, AS/NZS 4065, AS/NZS 4676
steel, for electrical transmission, AS/NZS 4676, AS/NZS 4677
timber
- for electrical transmission, AS/NZS 4676
- load bearing, NZS 3605
Polyethylene
compounds for pressure pipes and fittings, AS/NZS 4131
film for packaging, NZS 7651
pipe installation, AS/NZS 2033
pipes
- blue, underground, for potable water, NZS 7610
- cold water, NZS 7601, NZS 7602, AS/NZS 2492, NZS/AS 2537
- fittings, for pressure applications, AS/NZS 4129
- gas, NZS 7646`
- hot water, AS/NZS 2492, NZS/AS 2537
- pressure applications, AS/NZS 4130
- waste discharge, AS/NZS 4401
Polymeric insulation, for cables, AS/NZS 1429
Polystyrene, expanded board, NZS/AS 1366
Polythene (see Polyethylene)
Polyurethane condoms, NZS 7106
Polyvinyl chloride (see PVC)
Port noise, NZS 6809
Portable electric tools, hand-held, AS/NZS 3160, AS/NZS 60745
Portable electrical control or conditioning devices, AS/NZS 3197
Portable electrical outlet devices, AS/NZS 3105
Portable fire extinguishers (see Fire extinguishers, portable)
Portland cement, NZS 3122
methods of test, AS/NZS 2350
pozzolan, NZS 3123
supplementary materials, AS/NZS 3582
Portland-limestone filler cement, NZS 3125
Portable electrical outlet devices, AS/NZS 3105
Posts, fence, timber, NZS 3607
Potting mixes, legionellae, AS/NZS 5024(Int)
Poultry keeping, model bylaw, NZS 9201.13
Powder-actuated (PA) hand held fastening tools, AS/NZS 1873
Power cords (see Electric cables)
Power lines (see also Electric cables)
copper conductors
- bare, AS/NZS 1574, NZS 2206
- with extruded insulation, AS/NZS 60840
- PVC covered, NZS 1762
poles, AS/NZS 4065, AS/NZS 4676, AS/NZS 4677
Power mowers (see Mowers)
Power supplies, external, AS/NZS 4665
Power transformers & power supply units, safety, AS/NZS 61558, AS/NZS 60076
Power ultrasound measurement, AS/NZS 4714
Powered industrial trucks, NZS/AS 2359
Pozzolan cement, NZS 3123
Prams & pushchairs, safety, AS/NZS 2088
Precast concrete
lightweight panels and slabs, NZS 3151
pipes, drainage and pressure, AS/NZS 4058
Pressed metal tiles, roofing, NZS 4217
Pressure equipment, AS/NZS 1200
competencies of inspectors, AS/NZS 4481
in-service inspection, AS/NZS 3788
inspection bodies/personnel, SAA/SNZ MP 76
Welding and brazing qualification, AS/NZS 3992
Pressure pipes (see Pipes & fittings)
Pressure vessels
fusion welded, NZS/BS 5500
- tanks, fusion welded, NZS 1841
Prestressing materials
anchorages, AS/NZS 1314
steel, AS/NZS 4672
Priming paint (see Paints)
Private integrated services network (PISN)
call transfer supplementary services, AS/NZS 4337
circuit mode multi-rate bearer services, AS/NZS 4238
circuit switched call control at Q, AS/NZS 11572
generic functional protocol, AS/NZS 4239
identification supplementary services, AS/NZS 4477
inter-exchange signalling protocol, diversion, AS/NZS 4342
name identification services
- stage 3, AS/NZS 4329
- stages 1 and 2, AS/NZS 4336 (Int)
numbering and sub-addressing, AS/NZS 4134
path replacement additional network feature, AS/NZS 4335 (Int), AS/NZS 4328
reference configurations, AS/NZS 4136
service description
- diversion supplementary services, AS/NZS 4341
- functional capabilities, AS/NZS 4135
signalling protocol
- call completion supplementary services, AS/NZS 4340
- call transfer supplementary services, AS/NZS 4339
specification
- call completion supplementary services, AS/NZS 4338 (Int)
- functional model, identification supplementary services, AS/NZS 4477
synchronization methods, AS/NZS 4138
Programming languages
C++, AS/NZS 14882
Fortran 90, AS/NZS 1486
Protective cabs, tractors, NZS 5101
Protective clothing (see also under specific items)
chainsaw user’s, AS/NZS 4453
chemicals, liquid, protection, AS/NZS 6529, AS/NZS 6530, AS/NZS ISO 13994, AS/NZS ISO 22608
faceguards, for cricket, AS/NZS 4499
fire, AS/NZS 4502
footwear, AS/NZS 2210, AS/NZS 4521
gloves, AS/NZS 2161
guidelines for, AS/NZS 4501
headgear, for cricket, AS/NZS 4499
heat, AS/NZS 4502
helmets
- cricket, AS/NZS 4499
- horse & pony riders, AS/NZS 3838
- industrial, NZS 2264, AS/NZS 1801
- methods of test, AS/NZS 2512
- motoring, NZS 1215, AS/NZS 1698
- occupational, AS/NZS 1801
- vehicle users', NZS 5430, AS/NZS 1698
high visibility, NZS 5839, AS/NZS 1906.4, AS/NZS 4602
legwear for chain saw users, NZS 5840
liquid chemical protection, AS/NZS 6529, AS/NZS 6530, AS/NZS ISO 13994
molten metal, AS/NZS 4502
occupational, AS/NZS 4501
selection of, AS/NZS 4501
sun protection, AS/NZS 4399
temple protectors, for cricket, AS/NZS 4499
X-ray equipment, AS/NZS 4543
Protective coatings, site testing, AS/NZS 3894
Protective devices, X-radiation, AS/ NZS 4543
Protocol
end system routing information, AS/NZS 4095
session mapping changes, AS/NZS 4105
Public nuisances, model bylaw, NZS 9201 Chapter 11
Public places, model bylaw, NZS 9201.4
Public toilets, NZS 4241
Pulp, APPITA tests, NZS/AS and AS/NZS 1301
Pumps
circulation, AS/NZS 3350.2.51, AS/NZS 60335.2.51
for liquids not exceeding 35 0C, AS/NZS 3350.2.41, AS/NZS 60335.2.41
solar & heat, AS/NZS 2712
Pushchairs, AS/NZS 2088
PVC
conduit for electric wiring, AS/NZS 2053
installation of unplasticized pipe systems, NZS 7643, AS/NZS 2032
insulated electric cables, AS/NZS 60227
- copper conductors, NZS 1762
pipes & fittings
- drainage, underground, AS/NZS 1260
- installation, AS/NZS 2032
- methods of test, AS/NZS 1462
- modified, AS/NZS 4765
- pressure applications, AS/NZS 1477, AS/NZS 4441
- waste and ventilating, AS/NZS 1260
rainwater goods, AS/NZS 2179
unplasticized waste & ventilating pipe, fittings and accessories, NZS 7641, NZS 7642

Quality
assurance, small businesses, SAA/SNZ HB 66
auditing systems, AS/NZS 19011
information technology framework, AS/NZS 13236
management
- configuration management, guidelines, AS/NZS 3907
- quality system elements, AS/NZS 9004
- small businesses, what to do, SAA/SNZ HB 66
management & system elements, NZS 9004
plans, AS/NZS 9004
welding, AS/NZS ISO 3834
Quality systems
automotive suppliers, SAA/SNZ HB 193
comparison of standards, SAA/SNZ HB 150
configuration management, guidelines, AS/NZS 3907
design, production, installation, servicing, AS/NZS ISO 9001, AS/NZS ISO 9004
environmental management systems, AS/NZS ISO 14001, AS/NZS ISO 14004
- auditing, AS/NZS 19011
- labels, AS/NZS ISO 14021
- life cycle assessment, AS/NZS 14040, AS/NZS 14041
- performance evaluation, AS/NZS 14031, SAA/SNZ HB 145
guidelines, AS/NZS 3905
- for architecture & engineering design, AS/NZS 3905.12
- for food and drink industry, AS/NZS ISO 15161
- for project management, AS/NZS 3905.16
- for small businesses, what to do, SAA/SNZ HB 66
- for the hospitality industry, AS/NZS 3905.3
- for the road freight transport industry, AS/NZS 3905.7
health & safety environment, SAA/SNZ HB 139
plans, AS/NZS ISO 10005
selection & use, guide, AS/NZS ISO 9000
small businesses, SAA/SNZ HB 66
software, AS/NZS 4366, AS/NZS 9126, AS/NZS ISO/IEC 25062
vocabulary, AS/NZS ISO 9000
Quantity
measurement, civil engineering, NZS 4224
surveying, NZS 4202

RCBOs, AS/NZS 61009


RCCBs (Residual current-operated circuit breakers), AS/NZS 61008
RCDs (Residual current devices) AS/NZS 3190
Racing car drivers' helmets, NZS 5430, AS/NZS 1698
methods of test, AS/NZS 2512
Racquet sports, eye protectors for, AS/NZS 4066
Radar transponders, marine search and rescue, AS/NZS 4432
Radiant warmers, infant, AS/NZS 3200.2.21
Radiation
filters for eye protection against, AS/NZS 1337, AS/NZS 1338
radiofrequency, NZS 2772.1, NZS 6609
Radio antennae, NZS 6603
Radio disturbance characteristics
information technology equipment, AS/NZS CISPR 22
measurement of lighting, AS/NZS CISPR 15
receivers on boats & vehicles, AS/NZS CISPR 25
Radio equipment
amplitude modulated equipment, aeronautical, AS/NZS 4583
fixed services, AS/NZS 4295
HF citizen band, AS/NZS 4355
land mobile, AS/NZS 4295
MF & HF, maritime, AS/NZS 4582, AS/NZS 4869, AS/NZS 61097, AS/NZS IEC 62287
protection of, AS/NZS CISPR 12, AS/NZS CISPR 25
short range devices, AS/NZS 4268
UHF citizen band, AS/NZS 4365
VHF, maritime, AS/NZS 4415, AS/NZS 61097
Radio frequency identification of animals, NZS/ISO 11784, NZS/ISO 11785
Radio interference (see also Electromagnetic interference)
interference limits for FM-sound receivers, AS/NZS CISPR 13
interference measuring apparatus, AS/NZS CISPR 16
measurement and suppression, AS/NZS CISPR 12
receivers on board vehicles, AS/NZS 4448, AS/NZS CISPR 12, AS/NZS CISPR 25
Radio reception, VHF-FM, NZS 6602
Radio transmitting equipment
aeronautical, AS/NZS 4583
maritime
- CSTDMA, AS/NZS IEC 62287
- MF & HF, AS/NZS 4582
- VHF, AS/NZS 4415, AS/NZS 61097
safety requirements, IEC 215
Radiocommunications
emergency position indicating beacons, AS/NZS 4330, AS/NZS 4869
equipment
- digital equipment, AS/NZS 4768
- electromagnetic capability, AS/NZS 4778
handphone and citizen band radio services, AS/NZS 4355, AS/NZS 4365
land mobile bands, AS/NZS 4295, AS/NZS 4768
maritime
- MF & HF, AS/NZS 4582, AS/NZS 4770
- VHF, AS/NZS 4415, AS/NZS 61097
paging service, AS/NZS 4769
siting and operation, AS/NZS 5070
Radiofrequency equipment, industrial, scientific and medical, AS/NZS CISPR, 11
Radiofrequency radiation, NZS 2772.1, NZS 6609
Radiographic equipment
dento-maxillofacial X-ray equipment, AS/NZS 3200.2.201
determination of characteristics, AS/NZS 4358
- X-ray image intensifiers, AS/NZS 4356
X-ray tube assemblies, AS/NZS 4274, AS/NZS 4394
Radionuclide
calibrators, AS/NZS 4354
imaging devices, AS/NZS 4378, AS/NZS 4545
Radiotherapy
anode X-ray tubes, characteristics, AS/NZS 4394
capacitor discharge X-ray generators, AS/NZS 3200.2.15
diagnostic ultrasonic equipment, AS/NZS 4194
diagnostic X-ray assemblies, AS/NZS 3200.2.28
diagnostic X-ray equipment, AS/NZS 4358
diagnostic X-ray generators AS/NZS 3200.2.7
dosemeters, patient contact, AS/NZS 3200.2.9
equipment, AS/NZS 4495
gamma cameras, Anger type, AS/NZS 4378
gamma-ray afterloading equipment, AS/NZS 3200.2.17
rotating, X-ray tubes, anode, AS/NZS 4394
simulators, AS/NZS 3200.2.29, AS/NZS 4213
treatment, room design, AS/NZS 3824
X-ray image intensifiers, AS/NZS 4356
Railway rolling stock
axles, NZS/ISO 1005
tyres, NZS/ISO 1005
wheels, NZS/ISO 1005
Rainwater, accessories and fasteners, AS/NZS 2179
Range hoods, AS/NZS 3350.2.31, AS/NZS 60335.2.31
Ranges (see Cookers)
Reciprocating internal combustion engines, performance, NZS/ISO 3046
Records
health, NZS 8153
management, AS/NZS ISO 23081
Recycling, domestic electrical appliances, AS/NZS 4701
Reels, fire hose, AS/NZS 1221
Reflectors, high visibility garments, NZS 5839
Refrigerants, classification, AS/NZS 1677.1
Refrigerated food cabinets, commercial, AS/NZS 60335.2.89
Refrigerated room air conditioners, AS/NZS 3350.2.40, AS/NZS 60335.2.40
Refrigerating plant, mechanical (compression), safety, AS/NZS 1677
Refrigerators
commercial, AS/NZS 60335.2.89
energy labelling, AS/NZS 4474
performance, AS/NZS 4474
Refuse collection
containers, polyethylene bags, NZS 7603
model bylaw, NZS 9201.6
Regional water boards, model bylaw, NZS 9203
Regulatory Compliance Mark (RCM), AS/NZS 4417
Reinforced concrete (see Concrete, reinforcement)
Relative density of soil, NZS 4402.4.2.3
Remote controls, mining equipment, AS/NZS 4240
Rennet, coagulating power, NZS 8311
Reporting outstanding book orders, AS/NZS 2807
Requirements & approvals, electrical, in New Zealand, AS/NZS 3000, AS/NZS 4417
Residential
buildings, fire sprinkler systems, NZS 4515, NZS 4517
development, earth fill, NZS 4431
property inspection, NZS 4306
Residual current devices, AS/NZS 3190
Residual current-operated circuit-breakers, AS/NZS 61008
Resins, low styrene emission, AS/NZS 4585
Respiratory protective devices, AS/NZS 1716
selection, use & maintenance, AS/NZS 1715
Respiratory therapy equipment, AS/NZS 4237
Restraining devices
ambulance systems, AS/NZS 4535
children in motor vehicles, AS/NZS 1754, AS/NZS 4475
- children with disabilities, AS/NZS 4370
webbing for, motor vehicles, NZS 5432/AS 1753
Restraint minimization, NZS 8134.2, NZS 8141, SNZ HB 8141
Retail spinners, AS/NZS 4829
Reticulated natural gas, NZS 5442
Retreads, car, truck, bus tyres, AS/NZS 3889, NZS 5423
Retroreflectors, pedal cycles, NZS 5441
Ringelmann smoke chart, NZS 5201
Riser mains, fire brigade inlets, NZS 4521
Risk analysis, AS/NZS 3931
Risk areas (see Hazardous areas)
Risk assessment, family violence, NZS 8006
Risk management, AS/NZS 4360
environmental, HB 203
fire, SNZ HB 4525
flood, NZS 9401
guidelines, SAA/SNZ HB 436
healthcare sector, SAA/SNZ HB 228
legal sector, HB 296
local government, SNZ HB 4360
medical equipment, AS/NZS 4810
security, HB 167
software engineering, AS/NZS ISO/IEC 16085
sport & recreation, SNZ HB 8669
weeds, HB 294
Road
aggregates, sampling and testing, NZS 4407
construction, road making products, AS/NZS 2341
freight transport industry, quality system guidelines, AS/NZS 3905.7
lighting, AS/NZS 1158, NZS 6701
marking, waterborne paint, AS/NZS 4049.3
safety barrier systems, AS/NZS 3845
signs, AS/NZS 1906
vehicles (see Motor vehicles)
workers’ garments, AS/NZS 1906
works, Code of Practice, NZS HB 2002
Rock lobsters, processing of, NZS 8406
Roof
cladding, resistance to impact, AS/NZS 4040
coverings
- cellulose cement sheets, AS/NZS 2908
- concrete tiles, NZS 4206
- gullies, heated, AS/NZS 60335.2.83
- plastic, AS/NZS 1562
- pressed metal tiles, NZS 4217
- resistance to impact, AS/NZS 4040
- tiles, NZS 4206, NZS 4217
edge protection, AS/NZS 4994
Room heaters, AS/NZS 3102, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
Rotisseries, electric, AS/NZS 3350.2.6, AS/NZS 60335.2.6
Routing information exchange protocol, AS/NZS 4149
Rubber condoms, NZS 7104
Rubber hose (see Hose, rubber)
Rubber insulated cables, AS/NZS 60245
Rubbish bags, polyethylene, NZS 7603
Rubbish collection (see Refuse collection)
Rules, steel, measuring, for construction, NZS 6504
Rulings, protective footwear, AS/NZS 4821
Rural addressing, geographic information, AS/NZS 4819

Safe design for houses, NZS 4102


Safe working
confined spaces, SAA/SNZ HB 213, AS/NZS 2865
low voltage electrical installations, AS/NZS 4836
Safes and strongrooms, AS/NZS 3809, AS/NZS 3810
Safety
baby carriages, AS/NZS 2088
barriers, for pools, NZS 8500
belts & harnesses (see also Safety harness & Seat belts)
- industrial, AS/NZS 1891, AS/NZS 4488, NZS 5811
- marine, NZS 5823
cricket, headgear, AS/NZS 4499
chain saws, NZS 5819
child restraints in motor vehicles, AS/NZS 1754, AS/NZS 3629
- children with disabilities, AS/NZS 4370
children's night clothes, low fire danger, AS/NZS 1249
clothing (see Protective clothing & specific items)
cots
- folding, AS/NZS 2195
- for domestic use, AS/NZS 2172
- institutional, hospital and nursery use, AS/NZS 2130
dangerous goods
- initial emergency response guide, SNZ HB 76
- storage & handling, AS/NZS 4681, AS/NZS 2022
- transport, labels, NZS 5433
earthquakes, building design, NZS 4203
electric space heaters, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
fabrics, low fire danger, NZS 8704
footwear, AS/NZS 2210
frames & cabs for tractors, NZS 5101
glass
- for land vehicles, AS/NZS 2080
- in buildings, NZS 4223
gloves, AS/NZS 2161
hand-held motor operated electric tools, AS/NZS 60745
harnesses (see also Seat belts)
- children's, for car seats, AS/NZS 1754, AS/NZS 3629, AS/NZS 4370,
- industrial, AS/NZS 1891, AS/NZS 4488, NZS 5811
hazardous areas classification, AS/NZS 2430, AS/NZS 2381, AS/NZS 60079.10, AS/NZS 61241
helmets (see Helmets, protective)
household electrical appliances, AS/NZS 3350, AS/NZS 60335
industrial
- belts & harnesses, AS/NZS 1891, AS/NZS 4488, NZS 5811
- mesh, AS/NZS 4389
- new lift installations, AS/NZS 4431
- protective helmets, AS/NZS 1801
information technology equipment, AS/NZS 60950
laboratories, AS/NZS 2243
lasers, AS/NZS 1337, AS/NZS 2211, NZS 5821, AS/NZS 11553
- health care, AS/NZS 4173, AS/NZS 11990
low & high lift trucks, NZS/ANSI/ITSDF B56.1
machinery guards, NZS 5801
markings, industrial use, NZS 5807
mechanical (compression) refrigeration, AS/NZS 1677
mesh, AS/NZS 4389
pedal bicycles, normal road use, AS/NZS 1927
power transformers, power supply units & similar, AS/NZS 60076, AS/NZS 61558
prams and strollers, AS/NZS 2088
room heaters, electric, AS/NZS 3102, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
rough terrain forklift trucks, NZS/ANSI/ASME B56.6
seat belts for motor vehicles, AS/NZS 2596, NZS 5401
signs, occupational environment, NZS/AS 1319
timber preservation plant, AS/NZS 2843
toys, NZS 5820, NZS 5822, AS/NZS ISO 8124, AS/NZS 62115
trailers, coupling connections, NZS 5232
welding & cutting, NZS 4781
Sampling
inspection by attributes, AS 1199
- guide, AS 1399
iron and steel, for chemical analysis, AS/NZS 1050
road aggregates, NZS 4407
soils, NZS 4402
water and aggregate for concrete, NZS 3111
wool
- grab sampling, greasy wool, AS/NZS 1363
- subsampling staples from grab samples, AS/NZS 2721
Sand, mortars & plasters, NZS 3103
Sanitary plumbing & drainage systems, AS/NZS 3500.2
air admittance valves, AS/NZS 4936
Satellite distress beacons, AS/NZS 4280, AS/NZS 4869
Saws safe working practices, AS/NZS 3576
Scaffolding, AS/NZS 1576
guidelines AS/NZS 4576
model bylaw, NZS 9201
School
chairs, AS/NZS 4610
stationery, NZS 8132
Screw threads, pipe, NZS/BS 21
Screwing taps, NZS/BS 949
Screws (& nuts),
BS Whitworth thread, AS/NZS 2451
coach screws, metric hexagon, AS/NZS 1393
cross recessed
- countersunk head tapping screws, AS/NZS 4407, AS/NZS 4408
- pan head tapping screws, AS/NZS 4406
hexagon
- flange head tapping screws, AS/NZS 4410
- head tapping screws, AS/NZS 4402
- washer head tapping screws, AS/NZS 4409
ISO, AS/NZS 1427
metric
- hexagon, AS/NZS 1393
- hexagon socket set screws, AS/NZS 1421
slotted
- countersunk head tapping screws, AS/NZS 4404
- pan head tapping screws, AS/NZS 4403
- raised countersunk head tapping screws, AS/NZS 4405
tapping screws
- heat treated steel, mechanical properties, AS/NZS 4412
- thread AS/NZS 4411
unified hexagon, AS/NZS 2465
Whitworth thread, AS/NZS 2451
Scuttles for ships, NZS 5237
Seals, security, AS/NZS 4255
Seat belts (see also Safety harnesses)
car, AS/NZS 2596, AS/NZS 4475, NZS 5401
- for children, AS/NZS 1754, AS/NZS 3629, AS/NZS 4370
webbing for, AS/NZS 4475, NZS 5432/AS 1753
Security
computers, NZS 6656
information security management, AS/NZS ISO/IEC 27001, AS/NZS ISO/IEC 19790, NZMP 6653, HB 231
risk management, HB 167
seals, AS/NZS 4255
vehicle immobilizers, AS/NZS 4601
X.400, implementation guide, SAA/SNZ HB 74
Segmental pavers, AS/NZS 4456
Seismic resistance of engineering systems, NZS 4219
Seismic restraint of building contents, NZS 4104
Self ballasted lamps for general lighting services
general requirements, AS/NZS 60969
MEPS requirements, AS/NZS 4847
safety requirements, AS/NZS 60968
test methods, AS/NZS 4847
Self-containment of caravans, motor caravans and boats, NZS 5465
Sentinel events workbook, SNZ HB 8152
Septic tanks, household, AS/NZS 1546.1, AS/NZS 1547
Sewer pipes (see Pipes & fittings, and Tubes)
Sewing machines, electric, AS/NZS 3350.2.28, AS/NZS 60335.2.28
SGM Document Interchange Format (SDIF), NZS/ISO 9069
SGML, AS/NZS 4110, NZS/ISO 8879
Shavers, AS/NZS 3350.2.8, AS/NZS 60335.2.8
supply units, AS/NZS 3194
Shellfish, molluscs, handling, processing, storage, distribution, AS/NZS 1766.3.5, NZS 8405
Shewart control charts, AS/NZS 3944
Shipbuilding
side scuttles, NZS 5237
windows, NZS 5238
Shoes (see Footwear)
Shopping trolleys, AS/NZS 3847
Shops, mobile, model bylaw, NZS 9201.4
Shorthand reporters' tests, AS/NZS 4272
Shower chairs, AS/NZS 3973
Showers
mixing valves, NZS 4611
electrical safety, AS/NZS 60335.2.105
performance of, AS/NZS 3662
SI units, NZS 6501
conversion factors, AS/NZS 1376
Sieve analysis, tests for soils, NZS 4402.2.8
Signal quality at DTE/DCE interfaces, AS/NZS 4160
Signals, traffic, AS/NZS 4192, NZS 5431
Signs
advertising, model bylaw, NZS 9201.2
disabled persons, access to buildings, NZS 4121
exit, electrical, AS/NZS 2293
illuminated flashing arrow, AS/NZS 4192
industrial identification marks, NZS 5807
occupational environment, NZS/AS 1319
retroreflective materials, AS/NZS 1906
road, AS/NZS 1906
traffic, AS/NZS 4192, NZS 5414
water safety, NZS 8690
Single-use
gloves (sterile), AS/NZS 4179
winged intravenous devices (sterile), AS/NZS 2485
Skin care appliances, AS/NZS 3359.2.23
Skin treatment appliances, ultra-violet & infra-red, AS/NZS 3350.2.27, AS/NZS 60335.2.27
Skins (see Hides)
Slip hazards
reduction, AS/NZS 3661
resistance, AS/NZS 4586
Slip resistance measurement of existing pedestrian surfaces, AS/NZS 4663
Small businesses, quality assurance, SAA/SNZ HB 66
Smoke
alarms, interconnected, NZS 4514
control, chart, Ringelmann, NZS 5201
release rates, AS/NZS 3837
Snow loading on buildings, NZS 4203
Socket screws, ISO metric, AS/NZS 1421
Sockets, electric (see Electric plugs & sockets)
Software
documentation, AS/NZS 4258
engineering, AS/NZS ISO/IEC 15289, AS/NZS ISO/IEC 16326, AS/NZS ISO/IEC 18019, AS/NZS ISO/IEC 19759, AS/NZS
ISO/IEC 19761, AS/NZS ISO/IEC 20926, AS/NZS ISO/IEC 23026, AS/NZS ISO/IEC 24570, AS/NZS ISO/IEC 25000, AS/NZS
ISO/IEC 25051, AS/NZS ISO/IEC 25062, AS/NZS ISO/IEC 90003
guide, AS/NZS 4598
life cycle process, AS/NZS ISO/IEC 12207, AS/NZS 15271
measurement, AS/NZS 14143, AS/NZS 15939
Petri nets, AS/NZS 15909
product evaluation, AS/NZS 14598
quality
- product quality, AS/NZS 9126
- requirements & testing, AS/NZS 4366, AS/NZS ISO/IEC 25062
Soil, fill for residential development, NZS 4431
Soil conditioners, NZS 4454
Soil testing, civil engineering, NZS 4402
Solar collectors, AS/NZS 2535
Solar water heaters
installation, NZS 4614
performance rating, AS/NZS 4445.1
specification, AS/NZS 2712, NZS 4613
Solaria for cosmetic purposes AS/NZS 2635
Soldering irons, electric, AS/NZS 3350.2.45, AS/NZS 60335.2.45
Solderless crimped connections, AS/NZS 4437
Solid fuel heaters
domestic, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- installation, AS/NZS 2918
with electrical connections, AS/NZS 60335.2.102
Solvent cement
for PVC (uPVC) pipes, AS/NZS 3879
Sound measurement (see also Acoustic measurement)
methods, NZS 6801, NZS 6802, AS/NZS 2499
Sound signals, distribution, NZS 6603
Spa pools
fences for, NZS 8500
water quality, NZS 5826
electrical equipment, safety, AS/NZS 3136
Spa-baths, electrical equipment, safety, AS/NZS 3350.2.60, AS/NZS 3136, AS/NZS 60335.2.60
Space heaters
electric, safety, AS/NZS 3102, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
secondary guards AS/NZS 2286
solid fuel, AS/NZS 2918, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- with electrical connections, AS/NZS 60335.2.102
thermal storage, AS/NZS 3350.2.30, AS/NZS 60335.2.30, AS/NZS 3350.2.61, AS/NZS 60335.2.61
unit, testing, NZS/BS 4856
Spectacles
fashion spectacles, AS/NZS 1067
lens materials, NZS/BS 3062
Speed, of traffic, Bylaw, NZS 9201.28
Spin extractors, AS/NZS 3350.2.4
Spools for electric winding wires, NZS/AS 1005
Sport & recreation
risk management, SNZ HB 8669
symbols, NZS 8603
Spray extraction appliances, AS/NZS 60335.2.68
Spray painting booths, AS/NZS 4114
Sprinkler systems
automatic, NZS 4541
fire, residential, NZS 4515, NZS 4517
irrigation, design & installation, NZS 5103
SQL database language, AS/NZS 3968
Stairways, ladders, etc, fixed, NZS/AS 1657
Standard Generalized Markup Language (SGML), NZS/ISO 8879
Standards magazine, see introductory pages
Standards
abbreviations used, NZMP 8201
rules of procedures for council meetings, NZMP 103
writing of, NZMP 104
Standing orders
boards, councils, committees, NZMP 9204
territorial authorities, bylaw, NZS 9202
Static electricity, control of, AS/NZS 1020
Stationery and printing (see Paper)
Stationary source emissions, AS/NZS 4323
Steam cleaners, AS/NZS 3350.2.79, AS/NZS 60335.2.79
Steel
casting testing, AS/NZS 2574
colour coding of steel product, AS/NZS 4496
conductors & stays, NZS/AS 1222
construction
- code for design, NZS 3404
- metal-arc welding, AS/NZS 1554, NZS 4702
- methods of test, AS/NZS 2098
- safe erection, SAA/SNZ HB 62
- structural steel, AS/NZS 3679
- structural steel, welding, AS/NZS 1554, NZS 4702
flanges, AS/NZS 4331.1
methods of analysis, AS/NZS 1050
pipes
- corrugated, NZS 4405
- epoxy coatings, AS/NZS 3862
- gas, NZS/AS 2885
- hdp coatings, AS/NZS 1518
- liquid petroleum, NZS/AS 2885
- specification, NZS/BS 3601
- welded, NZS 4442
reinforcing materials, AS/NZS 1554.3, AS/NZS 4671
structures
- paints for, AS/NZS 3750
- safe erection of, SAA/SNZ HB 62
- studs, welded, AS/NZS 1554.2
Steels & wrought products
bars
- concrete reinforcement, NZS 4671
- hot-rolled structural, AS/NZS 3679.1
fencing wire, NZS 3471
hot-rolled plates, floorplates and slabs, AS/NZS 3678, AS/NZS 1594
- tolerances, AS/NZS 1365
pipes (see Pipes & fittings, and Tubes)
plates, AS/NZS 1594
- tolerances, AS/NZS 1365
sections
- hot-rolled, structural, NZS/BS 4848, AS/NZS 3679.1
sheet, AS/NZS 1594
- cold-rolled, unalloyed, AS/NZS 1595
stainless
- cold formed structures, AS/NZS 4673
- welded sections, AS/NZS 3679.2
tubes
- carbon steel (pressure), NZS/BS 3601
- for screwing, NZS/BS 1387
wire
- concrete reinforcement, NZS 4671
Sterilizing, reusable medical & surgical instruments, AS/NZS 4187, AS/NZS ISO 11137, AS/NZS 4815
Stock crates, NZS 5413
Stop light, high level, NZS 5461
Storage
cabinets
- biological safety, AS/NZS 2647
- refrigerated food cabinets, AS/NZS 60335.2.89
- strength & durability, AS/NZS 4790
CNG, NZS 5425
dangerous goods & articles, AS/NZS 4681, AS/NZS 2022
explosives, NZS 4403
liquefied chlorine gas AS/NZS 2927
liquids, NZS 3106
LPG, AS/NZS 1596
oil fuel, steel tanks for, NZS/API 650
tanks, polyethylene, AS/NZS 4766
toxic substances, AS/NZS 4452
Step-down convertors for ELV lamps, AS/NZS 4879
Storage water heaters, AS/NZS 3350.2.21, AS/NZS 60335.2.21
composite shells, NZS 4606.3
energy consumption calculations, AS/NZS 1056.4
energy efficiency, NZS 4305, AS/NZS 4692
general requirements, NZS 4606.1
single shells, NZS 4606.2
Stormwater
accessories and fasteners, AS/NZS 2179
drainage, AS/NZS 3500.3
pipes & fittings, AS/NZS 1254
Stoves (see Cookers, Space heaters)
Street lighting (see Road lighting)
Strength of soils, tests, NZS 4402.6
Stretchers, ambulance, NZS 1057
Strongrooms, AS/NZS 3809, AS/NZS 3810
Structural bolts, AS/NZS 1252
Structural concrete (see Concrete)
Structural engineering drawing practice, NZS/AS 1100
Structural laminated veneer lumber, AS/NZS 4357
methods of sampling, AS/NZS 2097
methods of test, AS/NZS 2098
Structural steels
hot-rolled sections, AS/NZS 3679.1
welded sections, AS/NZS 3679.2
Subdivision
for people & environment, SNZ HB 44
urban land, NZS 4404
Substations, electricity supply, NZS 6108
Sulphate content, test for soils, NZS 4402.3.2
Sun, protective clothing, AS/NZS 4399
Sunglasses, AS/NZS 1067
Sunscreen products, AS/NZS 2604
protective clothing, AS/NZS 4399
Surface cleaning appliances, electrical safety, AS/NZS 3350.2.54, AS/NZS 60335.2.54
Surfacing for playgrounds, NZS 5828, SNZ HB 5828
Surge suppression devices, telecommunications, HB 219, AS/NZS 3835, AS/NZS 4117
Surgical electrical equipment, AS/NZS 3200.2.2
Surgical implants, orthopaedic, AS/NZS 2817
Surveying, laser safety, AS/NZS 2211
Suspended ceilings, design and installation, AS/NZS 2785
Swimming pools, NZS 4441
electrical equipment, AS/NZS 3136
fences for, NZS 8500
premoulded fibre-reinforced plastics, AS/NZS 1838, AS/NZS 1839
safety barriers for, NZS 8500
water quality, NZS 5826
Switches
air-break AS/NZS 3133
appliances, AS/NZS 3139, AS/NZS 61058
cord line, AS/NZS 3127
high voltage, AS/NZS 60265
Switchgear
assemblies, low voltage, general requirements, NZS/AS 1136
low voltage
- controller-device interfaces, AS/NZS 62026
- general rules, AS/NZS 3947.1
- particular requirements, AS/NZS 3439
Swivel chairs, height adjustable, AS/NZS 4438
Symbols
disabled persons, for access to buildings, NZS 4121
electrical products, marking, AS/NZS 4417
graphical
- electrical power & communications, NZS/IEC 617
- electrotechnology, AS/NZS 1102
- medical electrical equipment, AS/NZS 4334
outdoor recreational, NZS 8603
Synthetic resins, low styrene emission, AS/NZS 4585
Syringes, user-applied labels, AS/NZS 4375
System life cycle processes (IT), AS/NZS 15288, AS/NZS ISO/IEC 19760

Tableware, ceramic, AS/NZS 4371


Tactile ground surface indicators, AS/NZS 1428.4
Tampons, AS/NZS 2869
Tanks
pressure, fusion welded, NZS 1841
septic, household, AS/NZS 1546.1, AS/NZS 1547
storage (see also Cylinders)
- polyethylene, AS/NZS 4766
- welded steel, oil fuel storage, NZS/API 650
Tape, adhesive,
packaging, AS/NZS 1599
pressure sensitive, AS/NZS 1635
Tapes, measuring, for construction, NZS 6504
Taps
for screwthreads, NZS/BS 949
water, AS/NZS 3718
Technical drawing, NZS/AS 1100
for students, SAA/SNZ HB 1
Telecommunications
cabling systems
- for commercial premises, AS/NZS 3080
- for small office/home office, AS/NZS ISO/IEC 15018
- industrial premises, AS/NZS ISO/IEC 24702
- testing, AS/NZS IEC 61935, AS/NZS 14763
DTE data link procedures, AS/NZS 3512, AS/NZS 3621, AS/NZS 4157
earth potential rise, protection against, HB 219, AS/NZS 3835
extra low voltage installations, AS/NZS 3015
mobile communication equipment
- installation in vehicles, AS/NZS 4346
optical fibre cabling acceptance testing, AS/NZS ISO/IEC 14763
pathways and spaces for commercial buildings, AS/NZS 3084
private integrated services network, AS/NZS 14475
- advice of charge, AS/NZS 15049, AS/NZS 15050
- basic call/connection control, AS/NZS 13247
- call interception, AS/NZS 15053, AS/NZS 15054
- call intrusion, AS/NZS 14845, AS/NZS 14846
- call offer supplementary services, AS/NZS 14841, AS/NZS 14843
- call transfer supplementary services, AS/NZS 4337
- circuit switched call control at Q, AS/NZS 11572
- do not disturb override, AS/NZS 14842, AS/NZS 14844
- inter-exchange signalling protocol, diversion, AS/NZS 4342
- message waiting, AS/NZS 15505, AS/NZS 15506
- name identification services, stage 3, AS/NZS 4329
- name identification services, stages 1 and 2, AS/NZS 4336 (Int)
- numbering and sub-addressing, AS/NZS 4134
- path replacement additional network feature, AS/NZS 4335 (Int)
- path replacement additional network feature, procedures, AS/NZS 4328
- PINX clock, AS/NZS 15507
- recall supplementary, AS/NZS 15051, AS/NZS 15052
- reference configurations, AS/NZS 4136
- route restriction, AS/NZS 13241, AS/NZS 13242
- service description, diversion supplementary services, AS/NZS 4341
- service description, functional capabilities, AS/NZS 4135
- signalling protocol, ATM, AS/NZS 13246
- signalling protocol, call completion supplementary services, AS/NZS 4340
- signalling protocol, call transfer supplementary services, AS/NZS 4339
- synchronization methods, AS/NZS 4138
- transit counter, AS/NZS 15055, AS/NZS 15056
private telecommunications networking, AS/NZS 4064
surge suppression devices, AS/NZS 4117
Teleconferencing, SAA/SNZ HB 75
Telephones, cordless, radiocommunication requirements for, AS/NZS 4281
Teletext, broadcast, NZS 6606
Television
antennae, NZS 6603
cabling, AS/NZS 1367
ghost-cancelling reference signal, AS/NZS 4414
receivers
- immunity, AS/NZS CISPR 20
- installation, NZS 6603
reception, NZS 6605
sites, electrical safety, AS/NZS 4249
transmission, digital, NZS 6610
Tempering valves, NZS 4617
Terminations for electric cable and wire
flat, quick-connect, AS/NZS 61210
low voltage circuits, AS/NZS 60998
Terminology (see Glossary)
Territorial authorities standing orders, model bylaw, NZS 9202
Test fingers for testing electrical hazards, NZS 1582
Testing (see also Chemical analysis and testing)
concrete, NZS 3112
fire extinguishers, portable, AS/NZS 1850
fire tests, AS/NZS 1530, NZS/BS 476, NZS/ISO 834, AS/NZS 60694
grout, NZS 3112
kitchen assemblies, AS/NZS 4387
paint, methods of test, AS/NZS 1580
PVC pipes and fittings, AS/NZS 1462
qualifications for welders, NZS 4711, AS/NZS 2980
road aggregates, NZ 4407
soils, civil engineering, NZS 4402
thermal resistance of buildings, NZS 4214
water and aggregates for concrete, NZS 3111
windows, NZS 4211
Text and office systems
document filing and retrieval, AS/NZS 4167
testing methodology, AS/NZS 4225
Text telecommunications, textphones, AS/NZS 4277
Textile floor coverings
cleaning, AS/NZS 3733
informative labeling, AS/NZS 2914
installation practice, AS/NZS 2455
metric units, AS/NZS 1385
tests and measurements, AS/NZS 2111
test specimens, AS/NZS 2119
tolerances, AS/NZS 1385
Textiles (see also Fabrics)
care labelling, AS/NZS 1957
floor coverings
- cleaning, AS/NZS 3733
- installation practice, AS/NZS 2455
- labeling, AS/NZS 2914
- metric units, AS/NZS 1385
- tests & measurements, AS/NZS 2111
- test specimens, AS/NZS 2119
labelling, AS/NZS 2392
methods of test, AS/NZS 2001
natural and man-made fibres, generic names, AS/NZS 2450
selection of care labelling instructions, AS/NZS 2621
upholstery, cleaning, AS/NZS 4849
Textphones
for people with hearing disabilities, AS/NZS 4277
Theatres, fire precautions, NZS 9232
Therapy equipment
diagnostic ultrasonic, AS/NZS 4194
radiotherapy simulators, AS/NZS 3200.2.29, AS/NZS 4213
Thermal
insulating materials, NZS 4222, AS/NZS 4859, NZS/BS 5422
- lightweight concrete, NZS 3152
- urea-formaldehyde (U) foam systems, NZS 4235
insulation, buildings, NZS 4222, NZS 4218, AS/NZS 4859, SNZ PAS 4244
- installation of, NZS 4246
resistance, buildings, NZS 4214
storage heaters (see Space heaters, Water heaters)
Thermostats, AS/NZS 3161
thermal storage water heaters, NZS 6214
Text communication, information technology, AS/NZS 4033
Third-party certification & accreditation, guidelines, SANZ/SAA HB 18, AS/NZS ISO/IEC 17020, NZS ISO/IEC 17025
Threads (see Screw threads)
Ties, wall, NZS 3604
Tiles
concrete, interlocking, for roofing, NZS 4206
flooring
- laying, NZS/AS 1884
pressed metal for roofing, NZS 4217
Timber (see also Plywood, Wood)
assessment of drying quality, AS/NZS 4787
classification and grading, NZS 3631
design, NZS 3603
dimensions, metric, NZS 3601
exterior, AS/NZS 2271
fence posts, NZS 3607
finger jointed, structural, AS/NZS 1491
framing, light frame buildings, NZS 3604
glossary of terms, AS/NZS 4491
grading, NZS 3631
grain, slope of, AS/NZS 1080
ladders, NZS 3609
laminated, AS/NZS 1328
mechanical stress grading, NZS 3618, AS/NZ 1748, AS/NZS 4490
methods of test
- density, AS/NZS 1080.3
- moisture content, AS/NZS 1080.1
- slope of grain, AS/NZS 1080.2
names, AS/NZS 1148
piles and poles, load bearing, NZS 3605
plywood construction, AS/NZS 2269
preservation, NZS 3640, AS/NZS 1605
- plant safety, AS/NZS 2843
profiles of mouldings and joinery, NZS 3610
profiles of weatherboards, fascia boards, flooring, NZS 3617
sampling and analysis, AS/NZS 1605
specification, preservative treatment, AS/NZS 1604
specifying in building, NZS 3602
strength groups, AS/NZS 2878
stress graded, AS/NZS 1748, AS/NZS 4490, AS/NZS 4063
structural, adhesives for
- aminoplastic, AS/NZS 4364(Int)
- for plywood and LVL, AS/NZS 2754
- phenolic, AS/NZS 4364(Int)
verification of properties, NZS 3622
windows, NZS 3619
Toasters, electric, domestic, AS/NZS 3350.2.9, AS/NZS 60335.2.9
Toilet chairs, AS/NZS 3973
Toilets
waterless composting, AS/NZS 1546.2
electrical safety, AS/NZS 3350.2.84, AS/NZS 60335.2.84
public, NZS 4241
Toll collection, electronic, NZS 6906
Tools, hand-held
electric, portable, AS/NZS 3160, AS/NZS 60745
powder-actuated (PA), AS/NZS 1873
Touch current, AS/NZS 60990
Towel rails, AS/NZS 3350.2.43, AS/NZS 60335.2.43
Towels, single-service cloth, AS/NZS 4286
Towing connections, drawbar trailers, NZS 5446
Toys
electric, safety of, AS/NZS 62115
inhalation and ingestion hazards, prevention, NZS 5822
safety requirements, NZS 5820, AS/NZS ISO 8124
Tracks, SNZ HB 8630
Tractors, agricultural, safety frames & cabs, NZS 5101, AS/NZS 2153
Trade waste
discharge to sewer, AS/NZS 4494
model bylaw, NZS 9201.23
Traders, travelling, model bylaw, NZS 9201.4
Traffic
Bylaw, NZS 9201.25
control devices, AS/NZS 1906, AS/NZS 4192
hazard lamps, NZS 5415
signals, NZS 5431
- cables, AS/NZS 2276
- lanterns, AS/NZS 2144
signs, AS/NZS 4192, NZS 5414
speed Bylaw, NZS 9201.28
Trailers
couplings, NZS 5232
drawbar, towing connections, NZS 5446
electrical connectors, NZS/AS 2513
light, NZS 5467
load door dimensions for meat transporters, NZS 5412
Trampolines, NZS 5855
Transcutaneous partial pressure monitors, AS/NZS 3200.2.23
Transformers
for ELV lamps, AS/NZS 4879
for tubular discharge lamps, AS/NZS 61050
Transmission, digital television, NZS 6610
Transmission equipment, AS/NZS 4771
safety requirements, IEC 215
Transport industry, road freight, quality system guidelines, AS/NZS 3905.7
Transportation and merchandise handling
hazardous liquids, NZS 5418
hazardous substances on land, NZS 5433, SNZ HB 77
initial emergency response guide, SNZ HB 76
labels for hazardous substances, NZS 5433
meat, loading door dimensions, NZS 5412
pallets, NZS 2010
Trolley jacks, AS/NZS 2615
Trolleys, for shopping, AS/NZS 3847
Trucks, forklift
fuels, NZS 5422
loading door dimensions for meat transporters, NZS 5412
powered, NZS/AS 2359
rough terrain, NZS/ASME/ANSI B56.6
Trunking systems, electric cables, AS/NZS 4296
Tuatua, processing of, NZS 8405
Tubes (see also Pipes & fittings)
copper & alloys
- airconditioning and refrigeration, AS/NZS 1571
- water, gas, sanitation NZS 3501
for pressure purposes, NZS/BS 3601
for screwing, NZS/BS 1387
steel (see Pipes & fittings, and Steel, tubes)
Tubs, laundry, AS/NZS 1229
Tumble dryers, AS/NZS 3350.2.11, AS/NZS 60335.2.11
Tyres
inflation pressure, AS/NZS 1268
new, for passenger vehicles, NZS 5453
pneumatic, new, truck and bus, AS/NZS 2230
retreading, AS/NZS 3889, NZS 5423

Ultrasonics
continuous-wave doppler systems, AS/NZS 4188
fields, AS/NZS 4190
hand-held probe doppler foetal heartbeat detectors, AS/NZS 4188
pressure pulse lithotripters, AS/NZS 4511
pulsed doppler diagnostic systems, AS/NZS 4966
surgical systems, AS/NZS 4512
therapeutic equipment, AS/NZS 3200.2.5, AS/NZS 4194, AS/NZS 4713
Ultrasound measurement, AS/NZS 4714
UN/LOCODE, SAA/SNZ MP 73
Undercoating paint (see Paints)
Underground marking tape, AS/NZS 2648, AS/NZS 4275
Underground mining, shaft equipment, AS/NZS 3785
Underground pipes
potable water, NZS 7610
sewers and drains, AS/NZS 1260
Unified hexagon bolts, screws and nuts, AS/NZS 2465
Unit coolers & heaters, fan coil units, testing & rating, NZS/BS 4856
Units, measurement, NZS 6501
Universal multiple-octet coded character set (UCS), AS/NZS 4189
Upholstered furniture
burning behaviour, AS/NZS 4088
cleaning, AS/NZS 4849
ignitability, AS/NZS 3744
Urban land, subdivision, NZS 4404
Urea-formaldehyde (U) foam systems for thermal insulation, NZS 4235
Urinals, AS/NZS 3982
Used, recycling electrical appliances, AS/NZS 4701

Vacuum cleaners, AS/NZS 3350.2.2, AS/NZS 60335.2.2, AS/NZS 60335.2.69, AS/NZS 60335.2.100
Value management, AS/NZS 4183
Valves, engineering
control, hot water systems, NZS 4608
gate
- cast iron, NZS/BS 5163
- resilient seated, NZS/AS 2638.2
globe & globe stop, cast iron, NZS/BS 5152
mixing, shower, NZS 4611
tempering, NZS 4617
thermal-bonded coatings, AS/NZS 4158
Vaporizers, electrical safety, AS/NZS 60335.2.101
Varnishes, application, NZS 2239
Vegetables, grading, NZS 8441
Vehicle
alarm systems, AS/NZS 3749
brake testing equipment, AS/NZS 4613
engine coolant, AS/NZS 2108
hoists, AS/NZS 1418.9
immobilizers, AS/NZS 4601
jacks, AS/NZS 2693
light trailers, NZS 5467
ramps
- disabled persons, AS/NZS 3856
- portable, AS/NZS 2640
support stands, AS/NZS 2538
Vehicle users' helmets, NZS 5430, AS/NZS 1698
methods of test, AS/NZS 2512
Vehicles
installation of mobile communication equipment, AS/NZS 4346
passenger, new tyres NZS 5453
Vending machines, AS/NZS 3350.2.75, AS/NZS 4864, AS/NZS 60335.2.75
Veneer
structural laminated veneer lumber, AS/NZS 4357
- methods of test, AS/NZS 2098
Ventilation for acceptable indoor air quality, NZS 4303
fire and smoke control, AS/NZS 1668
Ventilators, natural, AS/NZS 4740
VHF-FM compatibility, NZS 6602
Video
apparatus, AS/NZS 60065
digital, SAA/SNZ MP74
power consumption, AS/NZS 62087
sites, electrical safety, AS/NZS 4249
Violence, family, risk assessment, NZS 8006
Visibility garments, road users, NZS 5839
Vocabulary, quality, AS/NZS ISO 9000
Voice response systems, interactive, AS/NZS 4263
Voltages, IEC standard, NZS/IEC 38

Walking aids for the disabled, NZS 5831


Walking sticks, NZS 5831
Walkways, fixed, NZS/AS 1657
Wall cladding materials, AS/NZS 4236, AS/NZS 4256, AS/NZS 4257, AS/NZS 1562
resistance to impact, AS/NZS 4040
Wall tiles, NZS 3604
Wallboard (see Boards)
Warming plates, AS/NZS 3350.2.12, AS/NZS 60335.2.12
Washbasins, AS/NZS 1730
Washers, structural, AS/NZS 1252
Washing machines, AS/NZS 3350.2.7, AS/NZS 60335.2.7
energy consumption, AS/NZS 2040
Waste
and ventilating pipes, AS/NZS 1260
discharge to sewer, AS/NZS 4494
disposers, AS/NZS 3350.2.16, AS/NZS 60335.2.16
industrial, AS/NZS 4494
management of
- glossary of terms, AS/NZS 3831
- health care, NZS 4304
Wastewater, model bylaw
drainage, NZS 9201.22
onsite disposal systems, NZS 9201.27
Water and aggregate, for concrete, NZS 3121
testing NZS 3111
Water
disinfection tablets, iodine, AS/NZS 4609
drinking water treatment units, AS/NZS 3497
efficient products, AS/NZS 6400
examination of
- legionellae, AS/NZS 3896
jetting systems, AS/NZS 4233
microbiology examination, AS/NZS 4276
sampling, AS/NZS 5667
- model bylaw, NZS 9201.22, NZS 9201.23, NZS 9201.7
taps, AS/NZS 3718
treatment systems, AS/NZS 1546.3
Water-bed heaters, AS/NZS 3350.2.66, AS/NZS 60335.2.66
Water content, test for soils, NZS 4402.2.1
Water heaters
domestic
- composite shells, NZS 4606.3
- general requirements, NZS 4606.1
- low pressure, NZS 4602
- single shells, NZS 4606.2
electric
- energy efficiency, NZS 4305, AS/NZS 4692
- fixed, immersion, AS/NZS 3350.2.73, AS/NZS 60335.2.73
- instantaneous, AS/NZS 3350.2.35, AS/NZS 60335.2.35
- portable, immersion type, AS/NZS 3350.2.74, AS/NZS 60335.2.74
solar
- installation, NZS 4614
- performance rating, AS/NZS 4445.1
- specification, NZS 4613
thermal storage
- control valves, NZS 4608
- dairy type, NZS 4604
- installation, NZS 4603
- thermostats, NZS 6214
- valve vented systems, NZS 4607
Water pipes (see Pipes & fittings, and Tubes)
Water quality
materials in contact with potable water, AS/NZS 4020
sampling, AS/NZS 5667
Water safety, signage, NZS 8690
Water suction cleaning appliances, AS/NZS 3350.2.2
Water supply
acceptable solutions, AS/NZS 3500.1
backflow prevention, AS/NZS 2845
domestic type water treatment appliances, AS/NZS 4348
firefighters, SNZ PAS 4509
flexible tube connectors, AS/NZS 3499
model general bylaw, NZS 9201.7
Water systems, microbial control in buildings, AS/NZS 3666
Waterproofing, structures, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
Waterway firefighting equipment, SNZ PAS 4505
Weather seal gaskets for buildings, NZS/BS 4255
Weatherboarding profiles, NZS 3617
Webbing
car seat belts, AS/NZS 4475, NZS 5432/AS 1753
load restraint assemblies, AS/NZS 4380
Weeds, risk management, HB 294
Welded
pressure tanks, NZS 1841
steel pipes
- water, sewage, medium pressure gas, NZS 4442
steel sections, AS/NZS 3679.2
Welders, qualification tests for, NZS 4711, NZS 4703, AS/NZS 2980
Welding
aluminium structures, AS/NZS 1665
arc
- determination of hydrogen, AS/NZS 3752
brazing, AS/NZS 1167
cables, AS/NZS 1995
consumables
- covered electrodes, AS/NZS 4855
- for build-up & wear resistance, AS/NZS 2576
- procurement guidelines, AS/NZS ISO 14344
- technical delivery conditions, AS/NZS ISO 544
- tubular cored, AS/NZS 17633
electrodes
- covered, AS/NZS 4855, AS/NZS 4856, AS/NZS 4857
- metal arc, AS/NZS 2717, AS/NZS 4854, AS/NZS ISO 14343, AS/NZS ISO 18273
- tubular cored, AS/NZS ISO 17632, AS/NZS ISO 17633, AS/NZS ISO 17634, AS/NZS ISO 18276
filler metal, AS/NZS 1167
light-transmitting screens & curtains, AS/NZS 3957
metal-arc, NZS 4702
- steel structures, AS/NZS 1554
quality, AS/NZS ISO 3834
reinforcing steel, AS/NZS 1554.3
safety, NZS 4781
steel wire fabric for concrete reinforcement, NZS 4671
structural steel, AS/NZS 1554, NZS 4702
Wells, deep geothermal, NZS 2403
Wheelchairs
manually operated, NZS 5226
test methods, AS/NZS 3696
Wheels, road, light alloy NZS 5419
Whirlpool baths, AS/NZS 3350.2.60, AS/NZS 60335.2.60
Whitworth thread, bolts, screws and nuts, AS/NZS 2451
Wind loading on buildings, NZS 4203, AS/NZS 1170
Wind turbines, acoustics, NZS 6808
Windows
aluminium, NZS 3504
fire, NZS 4232
glazing in buildings, NZS 4223, AS/NZS 2208
performance, NZS 4211
ships', NZS 5238
timber, NZS 3619
Windscreen repair, automotive, AS/NZS 2366
Wire, steel
for concrete reinforcement, NZS 4671S 3422
galvanized, AS/NZS 4534
Wiring systems
in furniture, AS/NZS 4703
installation, plugs and socket outlets, AS/NZS 3131
fire and mechanical performance, AS/NZS 3013
supplemental handbook, SNZ HB 30
Wood (see Timber)
Wood-based panels, AS/NZS 1859, AS/NZS 4266
Woodburning stoves, (see also Heaters), AS/NZS 3869
Wool
calculation of yield, AS/NZS 1362
colour measurement, NZS 8707
core test regulations, AS/NZS 4447
determination of
- staple length and strength, AS/NZS 2810
- vegetable matter base, AS/NZS 1134
fibre determination
- IWTO certificates, AS/NZS 1362
- mean fibre diameter, AS/NZS 1133
- measurement of fibre after carding, NZS 8719
fleece testing, AS/NZS 4492
grab sampling, greasy wool, AS/NZS 1363
IWTO test regulations, AS/NZS 3829, AS/NZS 3849
measurement
- bulk of raw wool, NZS 8716
- fibre properties, AS/NZS 4844
- fleece testing, AS/NZS 4492
preservation, AS/NZS 1809
subsampling staples from grab samples, AS/NZS 2721
Workstations, office, AS/NZS 4443
Woven woolpacks, AS/NZS 4546
methods of test, AS/NZS 4547
Wrought copper and copper alloys, AS/NZS 1567, AS/NZS 1568
Wrought steel for mechanical and allied engineering, NZS/BS 970
Writing of Standards, NZMP 104

X-25
connection-mode network internal layer service, AS/NZS 4217
DTE conformance testing, AS/NZS 4157, AS/NZS 3621, AS/NZS 3512
logical link control protocol, AS/NZS 4166
network service over telephone line, AS/NZS 4224
provision of OSI network service via X.21/X.21.bis, AS/NZS 4232
X-ray
assemblies, AS/NZS 3200.2.28
associated equipment, AS/NZS 3200.2.32
dento-maxillofacial, AS/NZS 3200.2.201
electro-optical image intensifiers, characteristics of, AS/NZS 4356
equipment for tomography, AS/NZS 3200.2.44
fixed diagnostic equipment, AS/NZS 4358
generators
- capacitor discharge, AS/NZS 3200.2.15
- diagnostic, AS/NZS 3200.2.7, AS/NZS 4358
- therapeutic, AS/NZS 3200.2.8
medical imaging, AS/NZS 4188, AS/NZS 4190, AS/NZS 4358
radiation protection, AS/NZS 3200.1.3
radiotherapy
- dosemeters, AS/NZS 3200.2.9
- equipment, AS/NZS 4495
- simulators, AS/NZS 3200.2.29, AS/NZS 4213
tube
- anode, rotating, characteristics, AS/NZS 4394
- assemblies, AS/NZS 4274
XLPE cables, AS/NZS 5000
Xmas tree lighting sets, AS/NZS 60598.2.20

Zinc coatings, steel wire, AS/NZS 4534

You might also like