You are on page 1of 2

SR NO.

OBJECT Fan

FOR SINGLE SKIN AIR HANDLING UNIT [FDVS-FDVE] Make:Kruger,Nicotra or Approved Equivalent. Type:Forward Curved Fan Drive:Dynamically Balanced,Direct Driven interlocked with door. Velocity: Not More Then 10 mt/second. Make:NGEF,B.B,Crompton or Approved Equivalent. Type:TEFC,IP:55,Foot Mounted. Poles: 4 RPM:1400 Volts:3,415 M.O.C:Heavy Duty Hollow Extruded Aluminum sections rested on GI/AL/MS "C" Chenel MOC-Pre coated 18 SWG G.I. Sheet Colour:Deep Blue or Approved Equivalent. Hardware:.S.S or Galvenised,DiecasteAl.Hinges with Nylone Colour:Deep Blue or Approved Equivalent. Size: Indicte L x W x H &internal arrengement of components.

#Approve the drg. Before taken t

Motor

BODY

FILTERS WITH FILTER SECTIONS

Fresh Air[EU-2]: Box type,Al. const.,Washable HDPE,85% down to 20 With Mixing box & VCD. Pre Air[EU-4]:AHU mounted Flange type,Al. const.,Washable HDPE, 95% down to 10.

VOLUME CONTROL DAMPER

Type:Box,Aerofoil profile opposed blade,Gear driven,Nylone bush MOC: 18 swg Aluminum. Other:Marked for Open & Closed. SUBMIT FOLLOWINGS 1.G.A.Drawing before Manufacturing. 2.Fan Performance Curve 3.Motor Testing certificate. 4.IQ,DQ,PQ.of total installation. 5.Inspection:At Manufacturers work. 6.Noice level Testing certificate.

OTHERS

ANNEXURE-A

TUBE EXIAL FLOW FAN


We design and manufacture a wide spectrum of Tube Axial Flow Fans and Induced Draft Fans. The direct-driven axial fan offers an impeller mounted on the motor shaft. This is attached to the belt-driven axial fan and subsequently to the bifurcated fan range, thereby completely isolating the motor from the air stream. Feature:* Wheel Sizes: From 200mm- 1500mm * Volume: Flow from 800 m3/hr- 100,000 m3/hr * Pressure: From more...

TUBE AXIAL (All fans are Working at Normal & Fire Mode)

EXHAUST

FAN

UNIT

The fan shall be with necessary GI casing, Flanges, suitable adjustable pitch impellers, motor, GI Bird screen, Fan vertical Mounting brackets etc.,

Motor shall be of air over cooling type with IP-55 protection, Class 'H' insulation, suitable for 3phase, 415volts, 50hz power supply. The motor shall be of High efficiency-EFF2 class of motor.

Toilet and Pantry ventilation with propler exhaust fan :- will be available as per the standard size available in market any reputed make.

Thanks With Best Regards For Iskon Air Flow Systems

Yogesh Dakoria

You might also like