You are on page 1of 58

eNodeB LTE FDD V100R006 Product Description

eNodeB LTE FDD V100R006 Product Description


www.huawei.com

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Reference
eRAN6.0 Product Documentation http://support.huawei.com

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page1

eNodeB LTE FDD V100R006 Product Description

Contents
1. System Overview 2. System Structure 3. Auxiliary Devices 4. Typical Configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page2

eNodeB in LTE/SAE Network

E-UTRAN: Evolved UMTS Terrestrial Radio Access Network EPC: Evolved Packet Core network MME: Mobility Management Entity S-GW: Server Gateway
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page3

eNodeB LTE FDD V100R006 Product Description

Features
Flexible Modular Design Fast and Easy Deployment
Highly integrated software commissioning Light hardware for easy transportation BBU, RRU, and RFU can be flexibly combined.

Good Compatibility
Shared network for 2G/3G/LTE Future-oriented software design Smooth evolvement

Environmental Protection
Innovative environment-friendly delivery powered by energy saving scheme

IndustryIndustryLeading LTE Base Station


High Throughput
2*2MIMO at the uplink and downlink 4*2MIMO at the downlink 2*2 or 2*4 MU-MIMO at the uplink 2/4-antenna receive diversity at the uplink

Large Capacity
Supporting up to 18 cells at a single base station Supporting up to 10800 users in activate state at a single base station Supporting flexible frequency bandwidths: 1.4/3/5/10/15/20MHz

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page4

Huawei eNodeB Base Station Description


Indoor eNodeB BTS3900 Distributed eNodeB DBS3900 Outdoor eNodeB BTS 3900AL Micro- eNodeB BTS3202E

Outdoor eNodeB BTS3900A Indoor eNodeB BTS 3900L RFU RRU

All-in-one design. Compact, light weight. Support on

Multimodal RRU CDMA/WCDMA/LTE, or GSM/UMTS//LTE

BBU

Multimodal BBU 2U 19-in rack mount design Simultaneous 2G/3G/4G operation

wall / on pole installation.

Huawei SingleBTS Base Stations meet diversified MBB Site Scenarios. Three standardized modules shared by all eNodeB portfolio
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page5

eNodeB LTE FDD V100R006 Product Description

eNodeB Modules

Baseband Unit BBU3900

CPRI

RF Unit RFU/RRU

Cabinet

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page6

Capacity Specification
Item Maximum cells Maximum throughput per cell (20 MHz) Maximum throughput per eNodeB Specification 2 x 2 MIMO: 18 cells (1.4 MHz/3 MHz/5 MHz/10 MHz/15 MHz/20 MHz) Downlink rate at the Media Access Control (MAC) layer: 150 Mbit/s(2*2MIMO,64 QAM) Uplink rate at the MAC layer: 70 Mbit/s(2*2MIMO, 16QAM) UMPT: Downlink and Uplink data rate at the MAC layer: 1500 Mbit/s LMPT: Uplink data rate at the MAC layer is 450 Mbit/s; Downlink data rate at the MAC layer is 300 Mbit/s

Maximum UEs in 3 LBBPc: 3024 (bandwidth of 1.4 MHz) RRC_CONNECTE 3 LBBPd3: 6480 (bandwidth of 3 MHz) D mode in an 3 LBBPd1/2/3: 10,800 (bandwidth of 10 MHz/15 MHz/20 MHz) eNodeB Maximum concurrent Data Radio Bearers (DRBs) per UE 8

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page7

eNodeB LTE FDD V100R006 Product Description

Capacity Specification --See

Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page8

Contents
1. System Overview 2. System Structure 3. Auxiliary Devices 4. Typical Configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page9

eNodeB LTE FDD V100R006 Product Description

Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction 2.2 RF Unit(RFU, RRU) Introduction

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page10

BBU3900

Dimensions: 86mm x 442mm x 310mm (H x W x D) Power consumption: 132 W (3 x 10 MHz) ~300 W (3 x 20 MHz) Weight: 12 kg
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page11

eNodeB LTE FDD V100R006 Product Description

Physical Modules of the BBU3900


Slots for BBU3900 boards and modules

3 x 20MHz 2T2R typical configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page12

Logic Structure of BBU3900

The BBU3900 consists of four logical subsystems: control, transport, baseband, and power and environment monitoring

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page13

eNodeB LTE FDD V100R006 Product Description

Logic Structure of BBU3900--See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page14

LMPT (LTE Main Processing & Transmission Unit)

Mandatory without UMPT, maximum 2 boards, hold in slot 7(default) or 6. Function:


Performs configuration management, equipment management, performance monitoring, signaling processing, and radio resource management Controls all boards in the system Provides the system clock and transmission ports
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page15

eNodeB LTE FDD V100R006 Product Description

LMPT--See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page16

The type of The UMPT


UMPTa2 UMPTa6 UMPTb1 UMPTb2

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page17

eNodeB LTE FDD V100R006 Product Description

UMPT (Universal Main Processing & Transmission Unit )

Mandatory without LMPT, maximum 2 boards, hold in slot 7(default) or 6 Functions:


Performs configuration management, equipment management, performance monitoring, signaling processing, and radio resource management Controls all boards in the system Provides the system clock and transmission ports
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page18

Indicators on the UMPT--See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page19

10

eNodeB LTE FDD V100R006 Product Description

Indicators on the UMPT--See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page20

UMPT DIP Switch

Two DIP switches on the UMPT have the SW1 and SW2 silkscreen Each DIP switch has four bits The DIP switches have the following functions
SW1 is used to select the E1/T1 mode SW2 is used to select the grounding mode of E1/T1 transmission.
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page21

11

eNodeB LTE FDD V100R006 Product Description

Local O&M Connection Based on UMPT


The USB port with the USB silkscreen is used for the software upgrade of a base station using a Universal Serial Bus (USB) flash drive. This port also functions as a commissioning Ethernet port An adapter is used for local maintenance connects the USB port on the UMPT to an Ethernet cable during local maintenance

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page22

LBBP (The LTE Baseband Processing Unit)


LBBPc

LBBPd

Mandatory, maximum 6 boards, hold in slot 0, 1, 2, 3 (default),4, or 5. The LBBP is installed, in descending order of priority, in slot 3, 1, 2, 0, 4, or 5. Function: Processes uplink and downlink baseband signals Provides CPRI ports for communication with RF modules Achieves BBU baseband resource sharing
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page23

12

eNodeB LTE FDD V100R006 Product Description

LBBP PortsSee Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page24

Specification of LBBP
Boar Cell Bandwidth d Cell and Antenna Configuration Maximum Throughout
LBBP 1.4 MHz, 3 MHz, 5 3 x 10 MHz, 4T4R channel Downlink:300 Mbit/s c MHz, 10 MHz, 15 3 x 20 MHz, 2T2R channel Uplink:100 Mbit/s MHz, and 20 MHz 1 x 20 MHz, 4T4R channel LBBP 1.4 MHz, 3 MHz, 5 3 x 20 MHz, 2T2R channel Downlink:450 Mbit/s d1 MHz, 10 MHz, 15 Uplink:225 Mbit/s MHz, and 20 MHz LBBP 1.4 MHz, 3 MHz, 5 3 x 20 MHz, 2T2R channel Downlink:600 Mbit/s d2 MHz, 10 MHz, 15 3 x 20 MHz, 4T4R channel Uplink:225 Mbit/s MHz, and 20 MHz LBBP 1.4 MHz, 3 MHz, 5 6 x 20 MHz, 2T2R channel Downlink:600 Mbit/s d3 MHz, 10 MHz, 15 Uplink:300 Mbit/s MHz, and 20 MHz

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page25

13

eNodeB LTE FDD V100R006 Product Description

FAN
Mandatory, maximum 1 module The FAN unit has two types, FAN and FANc
FANc is adopted in high power consumption mode

Function:
Monitors the temperature and Dissipates heat for boards and modules of the BBU3900 Controls the fan speed and reports the status of fans to the LMPT

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page26

UPEU (The Universal Power and Environment interface Unit)


a b (1) BBU power switch (2) 7W2 conne ctor

(1) (2) 3V3 connec BBU power tor switch

Mandatory, maximum 2 modules, hold in slot 18 and slot 19.


Converts -48 V DC or +24 V DC power into +12 V DC power Provides ports for transmission of two RS485 signals and eight dry Boolean signals
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page27

14

eNodeB LTE FDD V100R006 Product Description

UEIU(The Universal Environment Interface Unit )


EXT-ALM1 EXT-ALM0 MON1 MON0

Dry contact Signal

RS 485 Signal

Sersor1

Sersor2

Sersor3

Sersor4

PDF

Provides two ports with each transmitting one RS485 signal Provides two ports with each transmitting four Boolean signals. The Boolean signals can only be dry contact or OC signals Transmits monitoring signals and alarm signals from external devices to the main control board
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page28

UTRP (The Universal Transmission Processing unit )


UTRPb4

UTRPc

Optional, maximum 2 modules. The UTRP is installed, in descending order of priority, in slot 4, 5, 0, or 1. The UTRP performs the following functions,
Provides extended E1/T1 ports to connect to transmission equipment, supporting ATM, TDM, and IP Provides electrical and optical transmission ports to connecting to transmission equipment Supports cold backup
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page29

15

eNodeB LTE FDD V100R006 Product Description

UTRP--See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page30

DIP switches on the UTRPb4

There are three DIP switches on the UTRPb4


SW1 and SW2 are used to set whether to ground the receiver end of the E1 SW3 is used to set the impedance of the E1 cable
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page31

16

eNodeB LTE FDD V100R006 Product Description

USCU (The Universal Satellite card and Clock Unit )


USCUb11 /USCUb12 (1) GPS port (2) RGPS port (3) TOD port (4) M-1PPS port (5) BITS port USCUb21
The USCUb11 provides ports to communicate with the RGPS (for example the reused equipment of the customer) and BITS equipment. It does not support GPS signals The USCUb12 performs time synchronization or obtains accurate clock signals from the transmission equipment. It does not support RGPS signals The USCUb21 provides ports to communicate with the BITS and TOD equipment. It supports GPS and GLONASS signals but does not support RGPS signals
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page32

Clock Synchronization Modes


An eNodeB supports the following types of external clock sources:
Global Positioning System (GPS) clock IEEE 1588 V2 clock 1PPS+TOD clock
PPS is short for pulse per second, and TOD is short for time of day.

If an eNodeB fails to obtain clock signals, it works in free-run mode for a certain period of time

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page33

17

eNodeB LTE FDD V100R006 Product Description

Clock Synchronization Modes


eNodeBs support multiple types of external reference clock sources, including,
E1/T1 line clock IP clock synchronous Ethernet building integrated timing supply (BITS) clock Global Positioning System (GPS) clock Remote Global Positioning System (RGPS) clock Global Navigation Satellite System (GLONASS) clock 1PPS+TOD clock (PPS is short for pulse per second, and TOD is short for time of day)

If an eNodeB fails to obtain clock signals, it works in free-run mode for a certain period time Co., Ltd. All rights reserved. Copyright 2013 Huawei of Technologies
Page34

Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction 2.2 RF Unit(RFU, RRU) Introduction

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page35

18

eNodeB LTE FDD V100R006 Product Description

RF Unit Category
Two kinds of RFU in eNodeB
RFU, adopted in BTS3900, BTS3900A, BTS3900L, BTS3900AL RRU, adopted in DBS3900, BTS3900, BTS3900A, BTS3900L, BTS3900AL

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page36

FDD RFU Types


Types RFU Name TX/R X FRE. Band Outpu t Power 2*60W 2*40W 2*60W G/U/L L L eRAN version eRAN3.0 eRAN2.0

RFU

AWS LRFU 2T2R 2.6G/AW S LRFUe 2T2R DD 800 MRFU 1T2R 1.8G/900 M 1.8G/900 MRFUd 2T2R M MRFUe 1T2R 1.8G/900 M

CRFUd 2T2R

L eRAN2.0 G/U/L/GU/ 1*60W eRAN2.0 GL G/U/L/GU/ 2*60W eRAN2.0 GL G/U/L/GU/ 1*60W eRAN2.0 GL

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page37

19

eNodeB LTE FDD V100R006 Product Description

Logical Structure of RFU

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page38

LRFU
LTE Radio Frequency Units (LRFUs) work in Frequency Division Duplex (FDD) mode The LRFU processes uplink and downlink services and controls and monitors internal boards or modules LRFU is RF unit which adopted by BTS3900, BTS3900A, BTS3900L, BTS3900AL

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page39

20

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page40

MRFU

One Multi-Mode Radio Frequency Unit (MRFU) supports a maximum of six carriers, which support GSM/UMTS/LTE The MRFU processes uplink and downlink services and controls and monitors internal boards or modules MRFU is RF unit which adopted by BTS3900, BTS3900A, BTS3900L, BTS3900AL
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page41

21

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page42

FDD RRU Types


Type s RRU Name TX/RX FRE. Band Output Power G/U/L eRAN version

RRU

RRU3201 RRU3203 RRU3220 RRU3221 RRU3222 RRU3229 RRU3240 RRU3808 RRU3841 RRU3908 RRU3928

2T2R 2T2R 2T2R 2T2R 2T2R 2T2R 2T4R 2T2R 4T4R 2T2R 2T2R

700M/2.6G 2*40W 700M 2*40W 800M 2*40W 2.6G 2*40W 800M 2*40W 2.6G 2*60W 2.6G 2*40W 2.1G/AWS 2*40W AWS 2*60W /4*30W 1.8G/900M 2*30W/2*40W 1.8G/900M 2*40W 1.8G/900M 1900M 900M/800 M 2*60W 2*60W 2*40W

RRU3929 2T2R RRU3942 2T4R RRU3961 2T2R

L L L L L L L L L G/U/L/GU/GL G/U/L/GU/GL G/U/L/GU/GL/ UL G/U/L/GU/GL/ UL G/U/L/GU U/L/UL


Page43

eRAN2.0 eRAN2.0 eRAN2.0 eRAN2.0 eRAN2.0 eRAN2.0 eRAN3.0 eRAN2.0 eRAN3.0 eRAN2.0 eRAN2.0 eRAN2.0 eRAN3.0 eRAN6.0 eRAN6.0 eRAN6.0

RRU3821 2T2R 1800M 2*5W E Huawei Technologies Co., Ltd. All rights reserved. Copyright 2013 RRU3829 2T2R 2100M 2*60W

U/L

22

eNodeB LTE FDD V100R006 Product Description

Logical Structure of RRU

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page44

RRU3201 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page45

23

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page46

Specifications of RRU3201
Item Frequency Band/ Bandwidth (FDD) Frequency band 700 MHz (Band 13) 2.6 GHz (Band 7) Dimensions (H x W x D) Weight Maximum output power Specification RX band (MHz) 777 to 787 TX band (MHz) 746 to 756 Supported bandwidth (MHz) 5, 10, 15, or 20 5, 10, 15, or 20

2500 to 2620 to 2570 2690

485 mm (19.09 in.) x 285 mm (11.22 in.) x 170 mm (6.7 in.) (23.5 L, with a housing) Not greater than 19 kg (41.9 lb) (with a housing) 2 * 40 W

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page47

24

eNodeB LTE FDD V100R006 Product Description

RRU3220 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page48

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page49

25

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3220
Item Frequency Band/ Bandwidth (FDD) Frequen cy band DD 800 MHz Specification RX band (MHz) 832 to 847 842 to 862 TX band (MHz) 791 to 806 801 to 821 Supported bandwidth (MHz) 5, 10, 15, or 20

Dimensions (H x W x D) Weight Maximum output power Power consumption

400 mm (15.75 in.) x 240 mm (9.45 in.) x 160 mm (6.3 in.) (15 L, with a housing) Not greater than 15 kg (33.08 lb) (with a housing) 2*40 W 290 W (2*40 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page50

RRU3222 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page51

26

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page52

Specifications of RRU3222
Item Frequency Band/ Bandwidth (FDD) Dimensions (H x W x D) Weight Maximum output power Power consumption Frequenc y band FDD 800 MHz Specification RX band (MHz) 832 to 862 TX band (MHz) Supported bandwidth (MHz)

791 to 821 5, 10, 15, or 20

485 mm (19.09 in.) x 300 mm (11.81 in.) x 170 mm (6.7 in.) (24 L, with a housing) Not greater than 15 kg (33.08 lb) (with a housing) 2*40 W 300 W (2*40 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page53

27

eNodeB LTE FDD V100R006 Product Description

RRU3808 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page54

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page55

28

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3808
Item
Frequency Band/ Bandwidth (FDD) Frequency band 2100 MHz AWS Dimensions (H x W x D) Weight Maximum output power

Specification
RX band (MHz) 1920 to 1980 1710 to 1755 TX band (MHz) 2110 to 2170 2110 to 2155 Supported bandwidth (MHz) 5, 10, 15, or 20

480 mm x 270 mm x 140 mm (without a housing or connector) 485 mm x 285 mm x 170 mm (with a housing) 17 kg (without a housing) 19 kg (with a housing) 2*40 W

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page56

RRU3908 DC V1 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page57

29

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page58

Specifications of RRU3908 DC V1
Item Frequency Band/ Bandwidth (FDD) Dimensions (H x W x D) Weight Input power Maximum output power Power consumption Frequency band 1800 MHz (Band 3) Specification RX band (MHz) 1710 to 1785 TX band (MHz) 1805 to 1880 Supported bandwidth (MHz) 5, 10, or 20

485 mm (19.09 in.) x 380 mm (14.96 in.) x 170 mm (6.7 in.) (31.3 L, with a housing) Not greater than 26 kg (57.33 lb) (with a housing) -36 V DC to -57 V DC when -48 V DC power is used 2*30 W 320 W (2*30 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page59

30

eNodeB LTE FDD V100R006 Product Description

RRU3908 DC V2 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page60

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page61

31

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3908 DC V2
Item Frequency Band/ Bandwidth (FDD) Dimensions (H x W x D) Weight Input power Maximum output power Power consumption Frequency band 900 MHz (Band 8) Specification RX band (MHz) 880 to 915 TX band (MHz) 925 to 960 Supported bandwidth (MHz) 5, 10, 15, or 20

485 mm (19.09 in.) x 380 mm (14.96 in.) x 170 mm (6.7 in.) (31.3 L, with a housing) Not greater than 26 kg (57.33 lb) (with a housing) -36 V DC to -57 V DC when -48 V DC power is used 2*40 W 350 W (2*40 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page62

RRU3908 AC V1 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page63

32

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page64

Specifications of RRU3908 AC V1
Item Frequency Band/ Bandwidth (FDD) Input power Maximum output power Power consumptio n Frequency band 1800 MHz (Band 3) Specification RX band (MHz) 1710 to 1785 TX band (MHz) 1805 to 1880 220AC 2*30 W Supported bandwidth (MHz) 5, 10, or 20

320 W (2*30 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page65

33

eNodeB LTE FDD V100R006 Product Description

RRU3908 AC V2 Exterior

With housing

Without housing

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page66

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page67

34

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3908 AC V2
Item Frequency Band/ Bandwidth (FDD) Input power Maximum output power Power consumptio n Frequenc y band 900 MHz (Band 8) Specification RX band (MHz) TX band (MHz) Supported bandwidth(MH z) 5, 10, 15, or 20

880 to 915 925 to 960 220AC 2*40 W

350 W (2*40 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page68

RRU3240

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page69

35

eNodeB LTE FDD V100R006 Product Description

Specifications of an RRU3240
Item Specification

Frequency Band/ Bandwidth (FDD) Dimensions (H x W x D) Weight Input power Maximum output power

Frequency band 2.6 GHz

RX band (MHz)

TX band (MHz)

Supported bandwidth (MHz)

2500 to 2570 2620 to 2690 5, 10, 15, or 20

480 mm x 270 mm x 140 mm (18 L, without the housing) 485 mm x 300 mm x 170 mm (25 L, with the housing) 20 kg (without the housing) 22 kg (with the housing) -48 V DC; voltage range: -57 V DC to -36 V DC 2*40 W

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page70

RRU3240-- Method of Using RF Ports


Product TX/RX Version Channel Quantity of Used RF Ports Method

V1R4 later than V1R4

One 2T2R One 1T2R

2 2 2

Two 1T2R One 2T2R

ANT_TX/RXA is used with ANT_TX/RXB. ANT_TX/RXA is used with ANT_RXC ANT_TX/RXB is used with ANT_RXD ANT_TX/RXA is used with ANT_RXC, and ANT_TX/RXB is used with ANT_RXD ANT_TX/RXA is used with ANT_TX/RXB
Page71

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

36

eNodeB LTE FDD V100R006 Product Description

RRU3961 Exterior

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page72

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page73

37

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3961
Item Frequency Band/ Bandwidth (FDD) Input power Maximum output power Power consumption Frequenc y band 800 MHz Specification RX band (MHz) 832 to 862 TX band (MHz) 791 to 821 Supported bandwidth (MHz) 10, or 20

-48V DC 2*40 W 1336W (2*20 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page74

RRU3821E Exterior
RRU3821EDC

The RRU 3821E is classified into AC RRUs and DC RRUs. The only difference is power port.
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page75

38

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page76

Specifications of RRU3821E
Item Frequency Band/ Bandwidth (FDD) Input power Maximum output power Frequency band 1800 MHz Specification RX band (MHz) 1744.9 to 1764.9 TX band (MHz) 1839.9 to 1859.9 Supported bandwidth (MHz) 5, 10, 15, or 20

-48 V DC or 100 V AC to -240 V AC 2*5W

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page77

39

eNodeB LTE FDD V100R006 Product Description

RRU3829 Exterior

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page78

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page79

40

eNodeB LTE FDD V100R006 Product Description

Specifications of RRU3829
Item Frequency Band/ Bandwidth (FDD) Input power Maximum output power Power consumptio n Frequency Band 2100 MHz Specification RX band (MHz) 1920 to 1980 TX band (MHz) 2110 to 2170 Supported bandwidth (MHz) 5, 10,15, or 20

-48 V DC 2*60 W

460W (2*60 W, 100% load)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page80

RET Modes

STMA Mode

SBT Mode

Direct Connection Mode


Page81

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

41

eNodeB LTE FDD V100R006 Product Description

SBT Mode RET Antenna Connection

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page82

Contents
1. System Overview 2. System Structure 3. Auxiliary Devices 4. Typical Configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page83

42

eNodeB LTE FDD V100R006 Product Description

Mapping between eNodeB Models and Cabinets


eNodeB Model BTS3900 LTE BTS3900L LTE BTS3900A LTE BTS3900AL LTE DBS3900 LTE Cabinet Used BTS3900 LTE cabinet BTS3900L LTE cabinet APM30H Ver.B, RFC, TMC11H Ver.B, and IBBS200D or IBBS200T Ver.B cabinets BTS3900AL cabinet with IBBS700D or IBBS700T cabinet, and TMC11H (Ver.C) cabinet APM30H Ver.B, TMC11H Ver.B, and IBBS200D or IBBS200T Ver.B cabinets

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page84

BTS3900 LTE Auxiliary

BTS3900 cabinet (-48 V) V/110V)

BTS3900 cabinet (+24 V)

BTS3900 cabinet (220

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page85

43

eNodeB LTE FDD V100R006 Product Description

Indoor eNodeB BTS3900L Cabinet


The indoor macro cabinet BTS3900L LTE houses the BBU3900 and RFUs. BTS3900L provides the functions such as power distribution, heat dissipation, and surge protection. A single BTS3900L LTE can be installed with a maximum of 12 RFUs.

-48V Cabinet

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page86

DBS3900 LTE Auxiliary


APM30H : Advanced Power module with heat exchanger IBBS200D: Integrated Battery Backup System with direct ventilation IBBS200T: Integrated Battery Backup System with TEC cooler TMC11H : Transmission Cabinet of 11 U high with heat exchanger IFS06 OCB

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page87

44

eNodeB LTE FDD V100R006 Product Description

APM30H (Advanced Power Module)


DC power supply Battery management Power system monitoring Power distribution Surge protection Temperature control Power backup Accommodation of customer equipment

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page88

Structure of the APM30H Cabinet

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page89

45

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page90

Structure of the IBBS200D Cabinet


Integrated Battery Backup System with direct ventilation (IBBS200D) provides long-duration backup power for a base station

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page91

46

eNodeB LTE FDD V100R006 Product Description

Structure of the IBBS200T Cabinet


Integrated Battery Backup System with TEC cooler (IBBS200T) provides long-duration backup power for a base station

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page92

Structure of the TMC11H Cabinet


Transmission Cabinet of 11 U high with heat exchanger provides space for customer equipment

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page93

47

eNodeB LTE FDD V100R006 Product Description

See Remarks

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page94

BBC (Battery Cabinet)


48 V DC 184 Ah backup power

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page95

48

eNodeB LTE FDD V100R006 Product Description

IFS06
An Indoor Floor installation Support (IFS06) is used for installing indoor RRUs
(1) Upper adjustable beam (2) Main frame (3) Lower adjustable beam (4) Front foot (5) Rear foot (6) Cable tray

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page96

OCB
An Outdoor Cable Conversion Box (OCB) interconnects cables of different core diameters

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page97

49

eNodeB LTE FDD V100R006 Product Description

BTS3900A LTE Auxiliary


Advanced Power module with heat exchanger (APM30H) Radio Frequency Cabinet (RFC) Integrated Battery Backup System with direct ventilation (IBBS200D) Integrated Battery Backup System with TEC cooler (IBBS200T) Transmission Cabinet of 11 U
Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page98

high with heat exchanger

Structure of the RFC Cabinet


Radio Frequency Cabinet (RFC)

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page99

50

eNodeB LTE FDD V100R006 Product Description

Contents
1. System Overview 2. System Structure 3. Auxiliary Devices 4. Typical Configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page100

Hardware Quantities in Typical Configurations (example)


Configuratio n 3 x 15 MHz/20 MHz, 2T2R 3 x 5 MHz/10 MHz, 4T4R 1 x 15 MHz/20 MHz, 4T4R Quantity of LMPT Quantity of LBBP Quantity of RRUs (2TX2RX) or RFUs 3 Quantity of Antennas 3 (dualpolarized antennas) 3 (antennas with four ports) 1 (antennas with four ports) 6 (dualpolarized antennas) Page101

LBBPc:1

LBBPc:1

LBBPc:1

6x20 MHz, 1 LBBPd3:1 6 2T2R Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

51

eNodeB LTE FDD V100R006 Product Description

Typical Configurations of BTS3900 LTE

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page102

Typical Configurations of BTS3900L LTE

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page103

52

eNodeB LTE FDD V100R006 Product Description

Typical Configurations of BBU3900 in GL/G*L Base Station


Typical Configurations of BBU in GL

Typical Configurations of BBU in G*L

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page104

Typical Configurations of BBU3900 in UL/U*L Base Station


Typical Configurations of BBU in UL

Typical Configurations of BBU in U*L

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page105

53

eNodeB LTE FDD V100R006 Product Description

Typical Configurations of BBU3900 in Triple-mode Base Station


Typical Configurations of BBU in G[U*L]

Typical Configurations of BBU in G*U*L

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page106

RF Connection

3 x 15 MHz/20 MHz, 2T2R

6 x 5 MHz/10 MHz, 2T2R


Page107

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

54

eNodeB LTE FDD V100R006 Product Description

RF Connection

3 x 5 MHz/10 MHz, 4T4R


Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved. Page108

eNodeB CPRI-based Topologies

Star Topology

Chain Topology

Intra-board Loadsharing Topology

Inter-board Loadsharing Topology

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page109

55

eNodeB LTE FDD V100R006 Product Description

eNodeB Transport Network Topologies

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page110

Common Transmission with IP (Front Plane)


An FE port on the GTMU board is connected to an FE port on the LMPT or UMPT board

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page111

56

eNodeB LTE FDD V100R006 Product Description

Working Principle of Route Backup

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page112

Hybrid Transmission
The UMTS traffic is transmitted on different paths whereas the LTE traffic is transmitted on one path

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page113

57

eNodeB LTE FDD V100R006 Product Description

Summary
LTE-SAE Network Architecture LTE eNodeB Capacity Baseband Unit and Components Specifications of RF Units LTE eNodeB Typical Configuration

Copyright 2013 Huawei Technologies Co., Ltd. All rights reserved.

Page114

Thank you
www.huawei.com

58

You might also like