You are on page 1of 1

HEALTH, SAFETY AND ENVIRONMENT (CCB 2012) UNIVERSITI TEKNOLOGI PETRONAS ASSIGNMENT 3 This is a Group Assignment based on the

same group from Assignment 1 and 2. You are requested to identify one case study : 1. Write the back ground of the case study including from Industries in detail for example, if you are working in the lab, you must relate the activities (the equipment, chemical, exhaust fan etc.) with the people working in the area. What are the potential sources of hazard Generate a complete scenario of detail hazard analysis using either fault tree analysis, event tree or HAZOP analysis to describe the scenario of the event. 2. Identify and assess the possible risk associated with the hazards What are the consequences if an accident occurs? Suggest method of controlling the risk Recommend ONE solution to minimize the risk. 3. Conclusion Your report must include the following format. 1. 2. 3. 4. 5. Title summary Introduction of case study Develop risk scenario Justification of the method used and must be supported with the weakness and advantages. 6. Procedure of the method 7. Draw the fault tree or event tree diagram. For HAZOP use table. 8. Identify and assess the possible risk associated with the hazards. 9. The consequences if an accident occurs 10. Suggest method of controlling the risk 11. Recommend ONE solution to minimize the risk 12. Conclusion Content : 20-30 pages. Submission to : AP Dr Mohamed Hasnain Isa (14-03-06) (Office : ext 7346; E-mail: hasnain_isa@petronas.com.my ) Due Date : TUESDAY, 16TH APRIL 2013, 12 noon

You might also like