You are on page 1of 1

PSC-Flex STYLE 100 SF-M

S/NO 1 2 3

PART NAME Body (Outer Layer) Body (Inner Layer) Reinforcing Fabric Wire Flange

MATERIAL EPDM, NBR CR, EPDM, NBR Nylon Fabric Hard Steel Wire Steel (Galvd) : 10 Bar (see table) : -10 to 80 Deg C : 550 MM/HG : Water, Warm Water, Sea Water, Air & Weak Acid etc.

4
Nominal Pipe Size

4 5

Design Pressure Operating Temperature Vacuum Rating *Applicable Fluids


L

Flanges Standard : DIN, ANSI, JIS & BS Other Flanges materials are available on request. AXIAL ELONGATION MM 10 10 10 10 12 12 12 12 12

NOMINAL PIPE SIZE DN 50 65 80 100 125 150 200 250 300 INS 2 21/2 3 4 5 6 8 10 12

NEUTRAL LENGTH L MM 100 100 100 100 120 120 120 120 120

AXIAL COMPRESSION MM 10 10 10 10 12 12 12 12 12

LATERAL DEFLECTION + OR - MM 10 10 10 10 12 12 12 12 12

ANGULAR DEFLECTION + OR - DEG 10 10 10 10 12 12 12 12 12

OPERATING TEMPERATURE AGAINST OPERATING PRESSURE


OPERATING TEMPERATURE C MAXIMUM OPERATING PRESSURE(bar) AMBIENT 14 50 12 60 10 70 8 80 6

NOTES Higher temperatures affect movement and pressure. As temperature increases, rated values must be reduced accordingly. Test pressure is 1.5 times design pressure. Vacuum rating is based on neutral installed length without external load. Products shall not be installed elongated on vacuum applications. Expansion joints may operate in pipelines or equipments carrying fluids at evaluated temperatures and pressures. Normal precautions shall be taken to make sure these parts are installed correctly and inspected regularly. Precautions shall be taken to protect personnel in the event of leakage or splash. * For other kinds of applicable fluids, except the above, to which the rubber joint becomes applicable, please kindly consult your supplier or manufacturer.

Pump Anchor Anchor

BW-D9911L FIG 92

100SF-M

100SF-M

FIG 977

BW-D9911L

You might also like