You are on page 1of 6

HYBRID AIR HANDLING UNIT with Refrigeration Unit

HEAT RECOVERY DEHUMIDIFIER


HUMIDITY CONTROL UNIT
HEAT RECOVERY UNIT

AL-KO + HRDe

AL-KO AHU Showing Service Doors

AL-KO AHU Internal View

AL-KO AHU Showing Process of Dehumidification

Entering Wet
Fresh Air

Leaving Dry
Fresh Air

Mode of Operation:
1. Fresh air enters the AHU and flows through the filter banks
2. The air is pre-cooled and dehumidified before it further cooled by the chilled water coil.
3. The chilled water coil cools the air to the required dew-point (DP) temperature
4. The air is finally conditioned to the desired humidity level through the Reheat Coil
5. HEPA filters are optional to clean the air from solid particles before it enters the space.

Built into one skid

No remote components

Control panels are optional

Control valves are optional

No external piping

No remote condenser

Other Products:

Water to Water Heat Pumps


Water Cooled Chillers
5 to 1000 kW

Ultra High Efficiency Air Cooled


Condensing Units
5 to 1000 kW

Ultra High Efficiency Air Cooled


Chillers
5 to 1000 kW

You might also like