You are on page 1of 5

SK FORMULATIONS

(An ISO 9001-2000 Certified Company)

POLYMERIC BASED
SPECIALITY SURFACE COATINGS

Office & Worksk


R-406 , TTC Industrial Area, MIDC, Rabale, Navi Mumbai-400701 Tel : (022) 27691959/1874

COMPANY PROFILE

COMPANY SK Formulations
ADDRESS

R-406, TTC Industrial Area, M.I.D.C., Rabale, Navi Mumbai 400701

PHONE

(022) 2769 1959 / 1874

WEBSITE

www.skformulations.com

PROMOTERS:
Dr. Kusum Joshi Ph.D (Polymer )
Sachin Joshi- BE (Polymer Engineering)

PRODUCT RANGE
1. Anticor SK-03 -Anticorrosion Coatings for Ferrous & Non-Ferrous Metals.
2. Insulect SK-03- Electric Insulation Coatings
3. Heat Seal - Heat Resistant / Heat Conductive coatings
4. Aquaproof /PMT/ AquaSeal / Aquashield - Waterproofing Coatings

ANTICOR SK-03
ANTI CORROSION COATING

ANTICOR SK-03 - ANTI CORROSION COATING


PRODUCT

ANTICOR SK-03

FUNCTION

Single component, air drying, Self-Priming,


Anti corrosion coatings for ferrous and non ferrous metals

CHEM.COMP. Thermoplastic copolymer


COLOUR

As desired

FEATURES:
1. One Component, Ready to Use System
2. Excellent Water repellency and lowest moisture absorption
3. Resistance to Acids, Alkalies, and Chemicals
4. Good abrasion and scratch resistance
5. Thermally Stable up to 2000 C
6. Quick drying at room temperature
7. Good U.V. Radiation resistance.
8. Greater surface coverage.

UNIQUE ADVANTAGES:
1. Single Pack Ready to Use System- No mixing operation
2. Quick Drying at Room Temp.- No need of Oven Baking
3. Self Priming No need to Apply Primer

BENEFITS:
1. Saves Cost - Economical Than Conventional, Protective paint systems, No Wastage of paint
2. Saves Labor Speedy Operation
3. Saves Time Quick Drying Properties, Reduces Delivery Time, Increases Production
4. Increases Safety with Flame Proof Grades

APPLICATION:
Protective paint for Equipments, Structural Steel, Machinery, Industrial Valves, Motors, Pumps,
Control Panels, Transformers, Solar Systems, Pipelines, Storage Tanks, Thermal Power Complexes,
Refineries, Thermal Power Plants and related applications.

COMPARISON CHART
No.

Parameters

Syn. Enamel

Epoxy

Anticor SK - 03

Base

Alkyd Resin base

Epoxy based

Thermoplastic Co - polymer

System

Single Pack

Double Pack

Single Pack

Mixing

Thinning with the


help of Thinner
necessary

Mixing of two
Ready to use system
components is very
critical

Necessity of
Primer

Red oxide Primer


necessary

Primer necessary

Self Priming Paint ( No need


of primer Application )

Drying Period

4 - 5 hours

48 - 96 hours.

10 min. for Touch Dry 24 hrs.


for Hard dry

Possibilities of
Adulteration

Possible

Possible

Not Possible

Acid, Alkali &


Chemical
resistance

No resistance

Good chemical
resistance

Excellent acid, Alkali,


Chemical resistance

U.V. Resistance

Poor

Poor

Excellent

Heat resistance

Poor

Poor

Stable up to 200 deg. Cel.

10 Life
(Performance)

6 Months

4 - 5 years

4 - 5 years.

11 Shades

All I.S. Shades

Limited shades

All I.S. Shades

12 Salt spray
resistance

Non performance;
decorative paint

96 hours

300 hours

You might also like