Professional Documents
Culture Documents
After firmware update is completed, start MMI and wait for about 2 minutes until its full loaded.
Insert the appropriate MMI \RNS Activation SD card into slot 1, and the following screen will appear
automatically.
NOTE: If the above screen doesnt appear, just eject and re-insert the SD card.
To continue just press any key, you can do just one turn with big round knob.
Now you will get Stage 2 screen, again just one turn with big round knob:
Now you should get Stage 3, again just one turn with big round knob:
NOT: Every time you turn round knob, the white screen will go away and the normal MMI \ RNS screen will be
back on display, this is expected just wait few minutes and the next stage will make its way.
After waiting for about 1-2 minutes on Stage 3 now you should get the final screen:
Press any key to go back to the normal MMI \ RNS standard view.
Now please reboot the MMI \ RNS unit by pressing the combination of 3 restart buttons together.
NOTE: To roll back from this patch you just need to re-install the firmware.