Professional Documents
Culture Documents
Foreword
Eva Lou and Barbara taught together at Westlake High School in Austin from 1982 –
1993. They team taught chemistry. They developed many labs and teaching ideas. They
gave many workshops together. They continue to give workshops together.
In their early years of teaching together Eva Lou and Barbara started a demo club. They
had a student named Robbie. He was a member of the demo club. Barbara taught him
one semester and Eva Lou the other. He named them the “Dynamic Duo”. He gave them
Tee shirts for Christmas with the “Dynamic Duo” lettering on them. The name stuck.
They still have those shirts.
Eva Lou has taught physical science, chemistry and AP chemistry for 26 years in the
Waco, Texas Public Schools, Houston, Texas Public Schools, and at Westlake High in
Austin, Texas before retiring in 1993. She also has worked in the analytical chemistry lab
for Shell Development Company’s Research Lab in Houston. For the past seven years
she has worked as an Independent Representative for George Seidel and Associates rep-
resenting Flinn Scientific.
Eva Lou has attended many NSF summer institutes including the AP Chemistry Workshop
at Hope College, the Woodrow Wilson Chemistry Institute at Princeton in 1986, the ICE
Institute at Berkeley, and the ICE Institute at the University of Arizona. She received the
Texas Excellence Award for Outstanding High School Teachers from the University of
Texas in 1987, the Outstanding Chemistry Teacher Award from the Central Texas Section
of the ACS in 1988 and was named as a Life Time Honorary Member of the Texas Chem-
istry Teachers organization in 1994. She has presented over seventy-five workshops at
the local, state and national levels.
Barbara J. Schumann
She attended many NSF summer institutes including the Woodrow Wilson Institute at
Princeton in 1989, the ICE Institute at Berkeley, the ICE Institute at the University of Michi-
gan at Ann Arbor, Frontiers in Science at Tufts University, and was trained in Teaching
Science with Toys at the University of Ohio at Miami of Ohio. She was trained by the
American Chemical Society in Operation Chemistry at the University of Wisconsin and
Purdue University. She was a member of the Central Texas Operation Chemistry team
for several years.
Foreword
She was selected by the Central Texas Region of the American Chemical Society as the
Chemistry Teacher of the year in Travis County in 1989, nominated for the Presidential
Award in Teaching in 1989, selected at the Chemistry Teacher of the year in the state of
Texas by the Associated Chemistry Teachers of the State of Texas in 1997 and received
the Spirit of Education Award at Westlake High School in 1998. She was awarded an
honorary membership in the Associated Chemistry Teachers of the State of Texas. She
has served for several years as the historian of that organization.
Since 1998 she has worked as an independent representative for George Seidel and As-
sociates representing Flinn Scientific. She has presented over 100 workshops.
Contents
A. Order of Teaching
First Semester Objectives A-2
Second Semester Objectives A-4
Calendar A-7
B. Basic Information
Element List B-2
Relative Atomic Mass of Chemical Elements B-3
Formula Weight Reference B-6
Oxidation Numbers B-7
Periodic Table B-9
C. Teaching Aids
Acids & Bases (pH) C-2
Covalent Nomenclature C-3
Conversions C-4
Solving Density Problems C-5
Significant Digits C-6
Redox Equations C-7
Combined Gas Laws C-8
Acid Formulas C-9
Balancing Equations C-10
Oxidation Numbers for Polyatomics C-12
Flow Chart for Formula Writing C-13
Flow Chart for Naming Compounds C-14
Chem Country Hall C-15
Sodium Chloride Dialog C-16
Atomic Theory Poems C-18
D. Mini Labs
Just How Many in a Mole? D-2
Molarity D-3
Massing Moles D-4
Rainbow Tube D-6
Types of Reactions D-8
Boiling Water in a Syringe D-9
Experiencing a Chemical Reaction D-10
Boiling Water in a Paper Cup D-11
The Dynamic Duo
5
Contents
Voice Activated Chemical Reaction D-12
Soda Can Crunch D-13
Marshmallow in a Syringe D-14
E. Labs
Electroplating Copper E-2
Testing Antacid Tablets E-3
Vitamin C Content of Fruit Juices E-6
Boyles Law E-12
Acid Decomposition E-13
Electrolysis E-18
Micro Mixture Separation E-19
Making Strawberry Soda E-21
CO2 (g)/CO2 (aq) Equilibrium E-23
Molar Mass of Butane E-25
Composition of Hydrates E-27
Journey into the Atom E-32
Mole & Mass Relationships E-33
Relative Strengths of Acids & Bases E-35
How Do you Know a Chemical Reaction is Happening? E-39
Qualitative Polymer Lab E-44
Acid Rain Project E-50
Half Life Simulation E-52
Colligative Properties E-55
Micro Titration Apparatus E-58
Top Secret—For Your Eyes Only E-59
F. Lab Management
Check List F-2
Chemistry Pledge & Songs F-3
Safety Test Lab Practical F-4
Putting Polyvinyl Alcohol into Solution F-5
Relative Strength of Acids & Bases Inventory F-6
Money Saving Tips F-7
G. Teaching Demos
Determination of the Molar Volume of Carbon Dioxide G-2
Strong Acid & Strong Base G-6
Contents
Weak Acid & Strong Base G-7
Weak Base & Strong Acid G-8
Rainbow Cylinder G-9
Determination of the Molecular Weight of CO2 G-12
Can Shaker G-15
Shaving in a Vacuum G-16
Hints for Demos & Demo Shows G-17
H. Ways to Teach Topics
Rules for Writing Equations H-2
Dimensional Analysis Problems H-4
Periodic Table with Electron Configurations H-7
Given equipment or supplies, the student will be able to identify or demonstrate the correct
safe use of the equipment or supply. (1a)
• The student will be able to identify matter and energy and heterogeneous and homo-
geneous substances. (7b, 8a)
• The student will be able to identify examples of physical and chemical properties. (6a,
6b, 7b, 10b)
• The student will be able to classify changes which occur in matter as physical, chemi-
cal or nuclear changes. (2a, 2b, 4a, 5a, 6b, 7a,8a,19a)
• The student will be able to classify matter as element, compound or mixture. (2a, 7b,
8a)
The student will be able to write chemical formulas for elements, ionic compounds and
covalent compounds. (4a, 4b)
Unit 4: Nomenclature
The student will be able to name compounds given the formula. (4b)
Unit 5: Equations
• The student will be able to verify the law of conservation of matter by balancing equa-
tions. (4a, 4b, 6b}
• Given the reactants and products, the student will be able to write an equation to rep-
resent chemical change. (3a, 4a, 4b,5a, 9b)
• Given the reactants, the student will be able to classify as to type of reaction, predict
products, and write a balanced equation for the four basic types of chemical reactions.
(2a, 3a, 4a, 4b, 5a, 7b, 9b)
• The student will be able to perform accurate measurements in the metric system using
the units of length, temperature, mass and volume to the correct number of significant
figures. (5a)
• The student will be able to solve problems involving the addition, subtraction, multipli-
cation, and division of numbers written in scientific notation; measurements made to
the correct number of significant figures; density, mass and volume; and percent rela-
tive error in data. (5a, 9a)
• The student will be able to use the factor-label method to make conversions between
any units of measure, given the quantitative relationship between the units. (4b)
• Given data, the student will be able to plot the data on a graph. (5b)
Unit 8: Stoichiometry
• The student will be able to compare properties of protons, neutrons and electrons. (4b,
7c, 7b)
• The student will be able to describe two isotopes of an element in terms of the number
of protons, electrons and neutrons. (4b, 7b, 7c)
• The student will be able to diagram an atom giving the spdf electron configuration
when given the atomic number and atomic mass of the element. (4b, 7b, 7c)
• The student will be able to draw an electron dot diagram for an atom with atomic num-
ber given. (4b, 7b, 7c)
• The student will be able to use the periodic table to classify elements as metals, metal-
loids, nonmetals or noble gases; predict oxidation numbers of common elements; pre-
dict chemical and physical properties of elements; predict principal quantum numbers
for electrons in a specific atom; list specific similarities and differences of properties
within families of elements in groups IA to VIIA with emphasis on trends in properties;
and trace periodic trends in ionization energy, electron affinity, electronegativity, and
bond character of elements in the periodic table. (4b, 3a, 7b, 7c)
• The student will be able to describe ionic, covalent and metallic bonds and to compare
properties associated with each of the bond types. (7c, 7b)
• The student will be able to predict whether a specific bond will be predominantly polar
covalent, nonpolar covalent or ionic using a table of electronegativities. (7a, 7b, 7c, 6b)
• The student will be able to draw dot diagrams for simple compounds, predict shape,
• The student will be able to list the three basic assumptions of the kinetic theory. (4B)
• The student will be able to define the general characteristics of the three states of mat-
ter and distinguish plasma as a special state. (3B, 7A, 8A))
• The student will be able to compare and contrast crystalline and amorphous solids.
(8A)
• The student will be able to list factors which affect solution rate. (4A, 6A, 9A, 9A)
• The student will be able to calculate the percent solute, molarity, and molality of a so-
lution given the mass of solute dissolved in a known quantity of water. (4A, 6A)
• The student will be able to list and describe the factors affecting solubility. (4A, 6A, 9A)
• The student will be able to use the colligative properties of a substance to determine
its boiling point, and freezing point in a water solution. (6A, 10A, 9A, 9B)
• The student will be able to explain the ionization process and write equations which
represent these reactions. (4A, 4B)
• The student will be able to write net ionic equations for a reaction. (4A, 4B)
• Given a solution the student will be able to outline the procedure to identify the ions by
using the qualitative analysis flow chart. (3B)
• The student will be able to explain factors which influence reaction rate. (1A, 2A, 2B,
5A, 5B)
• The student will be able to describe a catalyst and the concept of activation energy.
(8A, 10 A)
• The student will be able to write the equilibrium expression for a given reversible reac-
tion, calculate the value of Keq and explain the significance of the numerical value of
Keq. (4A, 4B, 5A, 5B)
• The student will be able to predict the effect of applying stress to a system at equilib-
rium according to LeChatelier's Principle. (6A, 6B, 9A, 9B)
• The student will be able to describe and identify acids and bases according to the Ar-
rhenius, Bronsted-Lowery, and Lewis acid-base theories. (3A)
• The student will be able to list the properties (chemical and physical) of acids and
bases according to the Arrhenius definition. (8A)
• The student will be able to differentiate between strong acids and weak acids and be-
tween strong bases and weak bases. (8A)
• The student will be able to describe the pH scale, give the approximate location on the
scale of some common substances, solve for the pH of a solution of known (H+) em-
ploy Kw to solve for (OH-) when {H+) is known in an aqueous solution, explain hy-
drolysis and describe a buffer solution and its use. (4A, 4B 8A)
• The student will be able to use titration procedures in volumetric analysis and use the
data obtained to calculate either volume or concentration of one factor. (2A, 6B. 9A.
9B)
• The student will be able to use indicators to determine the pH of an unknown solution.
(2A, 5A. 8A)
• The student will be able to assign oxidation numbers to elements in a compound and
identify the substance being oxidized, the substance being reduced, the oxidizing
agent, and the reducing agent in the reaction. (4A, 4B, 7A, 7B, 8A)
• The student will be able to balance the equation for a given oxidation-reduction reac-
tion by the electron transfer method or the half reaction method. (4A, 4B)
• The student will be able to compare and contrast an electrochemical and electrolytic
reaction, write equations for the half-cell reactions at the anode and cathode and give
practical examples of electrochemical tells. (7A, 7B, 10A)
• The student will be able to recognize; name, give empirical formulas and draw struc-
tural formulas for these types of hydrocarbons: alkanes, alkenes, alkynes and aromat-
ics. (3A, 4A, 4B, 7B)
• The student will be able to identify the functional group associated with alcohols, ac-
ids, esters, aldehydes, and ketones. (3A. 4A, 4B. 7B)
• The student will be able to recognize, name and draw structural formulas for these
types of hydrocarbon derivatives: alkyl halides, alcohols, ethers, aldehydes, ketones,
acids, esters, amines, amino acids. (3A, 4A, 4B, 7B)
• The student will be able to classify and describe chemically the nature and structure of
polymers, fats, carbohydrates and proteins and distinguish between soaps and deter-
gents. (3A. 4A, 4B, 1B, 10A)
alpha particles or beta particles and for atoms being bombarded by alpha particles,
neutrons and protons. (2B, 4A, 7A, 10A)
• The student will be able to compare fission and fusion and their uses in the everyday
world. (9A, 9B. 10A)
• The student will be able to explain the concept of half life. (2B. l0A)
• The student will evaluate career implications of chemistry and of nuclear principles by
reporting on science current events (10B)
Calendar
12 13 14 15 16
A Classes Begin E Assign Groups & E Pre-lab I Finish Lab 1-1& C Quiz Math
YEA! Gp. Exer. I Do Lab 1-1 Tech- Post Lab Skills (after test)
E Hand outs & E Safety Rules & niques L Learn Symbols K Test Unit 1
Safety Equipment O Test Unit 1 Fri- by 8/20 L PR 2-1 Read
G Demos E Video Safety (?) day 8/16 O Test tomorrow pp24-6, 38-50,
O Signature form L PR 1-1 HOut incl. practical 80-82
due Wed. Safety Questions
19 20 21 22 23
E Physical & C QZ 2-1 Symbols I Lab 2-2 Iron- C QZ 2-2 Symbols K Test Unit 2
Chemical Change I Lab 2-1 Know Sulfur I Minilab 2-1 Chro- L Learn Polya-
E Video Elements, Chern. Change O Test Unit 2 Fri- matography tomic Ions by 8/27
Cmpds. & Mixtures L PR 2-3 HOut + day E Unit 2 Re- O Test tomorrow L PR 3-1 Rd &
G Demo Sugar & Classify + p49 #1- view 8/23 Unit 2 notes pp50-70
H2S04; Candle 9
L PR 2-2 Phys &
Chern Prop HOut
26 27 28 29 30
E Assign Perm. A Open House A Faculty Meeting E Binary Covalent C QZ 3-3 Acid &
Groups; Activity C QZ 3-1 Formula C QZ 3-2 Ionic & Elem. Formulas Polyatomic Ions E
E Ions & Ionic For- Chart Formula L PR 3-5 HOut Mixed Formulas
mulas E Ionic Formulas E Acid Formulas Covalent G Demo Zinc &
L PR 3-2 HOut from Names G Demo Acid Rain Iodine L PR 3-6
Formula Chart L PR 3-3 HOut L PR 3-4 Hout HOut
Ionic Formula from Acid-Salt O Progress reports
Name
Element List
Notes:
The relative atomic masses of many elements are not invariant, but depend on the origin
and treatment of the material. The footnotes elaborate the types of variation to be ex-
pected for individual elements. The values given here apply to elements as they exist
naturally on earth and to certain artificial elements. When used with due regard to the foot-
notes they are considered reliable to +/- 1 in the last digit (or +/- 3 when followed by an
asterisk). Values in parentheses are used for certain radioactive elements whose relative
atomic masses cannot be quoted precisely without knowledge of origin; the value given is
the atomic mass number of the isotope of that element of longest known half-life. These
values are scaled to the relative atomic mass of 12C as exactly twelve.
(a) Element for which the value given is that of the radioisotope of longest half-life.
(b) Elements for which known variations in isotopic composition in normal terrestrial mate-
rial prevent a more precise relative atomic mass being given; values should be applicable
to any "normal" material.
(c) Element for which geological specimens are known in which the element has an
anomalous isotopic composition, such that the difference in relative atomic mass of the
element in such specimens from that given in the table may exceed considerably the im-
plied uncertainty.
(d) Element for which substantial variations from the value given can occur in commer-
cially available material because of inadvertent or undisclosed change of isotopic compo-
sition.
Oxidation Number
Oxidation Number
Periodic Table
From: http://
www.dayah.com
/periodic/
Note: This is a
dynamic periodic
table on the
web. Each ele-
ment links to its
properties.
H+ 100 10-1 10-2 10-3 10-4 10-5 10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 10-14
H+
A B
C A
I S
D E
OH-
10-14 10-13 10-12 10-11 10-10 10-9 10-8 10-7 10-6 10-5 10-4 10-3 10- 2 10-1 100
OH-
H+ 100 10-1 10-2 10-3 10-4 10-5 10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 10-14
H+
A B
C A
I S
D E
OH-
10-14 10-13 10-12 10-11 10-10 10-9 10-8 10-7 10-6 10-5 10-4 10-3 10- 2 10-1 100
OH-
H+ 100 10-1 10-2 10-3 10-4 10-5 10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 10-14
H+
A B
C A
I S
D E
OH-
10-14 10-13 10-12 10-11 10-10 10-9 10-8 10-7 10-6 10-5 10-4 10-3 10- 2 10-1 100
OH-
Covalent Nomenclature
1. Diatomic Elements:
2. Silicon Dioxide
3. Carbon Dioxide
4. Diphosphorous Pentoxide
5. Sulfur Dioxide
6. Iodine
7. Carbon Monoxide
8. Nitrogen Trichloride
9. Carbon Tetrachloride
14. Oxygen
16. Silver
Conversions
Mass-Mass
Mass to Moles
Multiply By Mole Ratio
Change Moles Back to Grams
That's Mass-Mass, If You Say So
Mass-Volume
Grams to Liter
Mass to Moles
Multiply By Mole Ratio
Change Moles to Liters
That's Mass-Volume, If You Say So.
Liters to Grams
Liters to Moles
Multiply By Mole Ratio
Change Moles to Grams
That's Mass-Volume, If You Say So.
Volume-Volume
M
Put finger over what you are solving
for. The formula you need will magi-
cally appear.
D V
Examples:
• D=M/V
• D=6.0 g/3.0 cm3
•
D=2.0 g/cm3
• V=M/D
• V=20.0 g/(2.0 g/ml)=20.0 g x ml/2.0 g=10 ml
• M=DV
• M=(6.0g/ml)x(5.0 ml)
• M=30.0 g
Significant Digits
The accuracy of the final answer to a problem depends upon the accuracy of the numbers
used to express each measurement used. The accuracy of any measurement depends
upon the instrument which is used and upon the observer. The digits in an answer which
imply more accuracy than the measurements justify are not significant and should be
dropped so that those digits which remain truly imply the accuracy of the original measure-
ments. The remaining digits are called significant digits. Significant digits consist of the
definitely known digits plus one estimated digit.
Zeros used solely for spacing the decimal point are not significant.
Redox Applications
Leo Ger
(Leo The Lion Goes Ger)
1. All Reactions
3. Electrochemical (Voltaic - V N A)
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
Acid Formulas
Rules:
Salt Acid
Negative Ion
ide Hydro___ic
ate ic
itc ous
Per___ate Per___ic
Hypo___ite Hypo___ous
Practice:
Acid Salt
Sulfuric
Hydrochloric
Nitrous
Perchloric
Hypoclorite
Balancing Equations
1. Balance the equation. There must be the same number of atoms of each element on
both sides of the equation; they are just arranged differently in molecules. The num-
bers of atoms are balanced by putting numbers, called coefficients, in front of the
molecules. You may never put coefficients in the middle of a formula. Do not change
the subscripts!
2. Equations are easier to balance if the oxygen atoms are left to the last to be balanced
and the hydrogen atoms next to last.
4. Water can be written either H2O or HOH. When water is on one side and an oxide is
on the other, write water H2O. When water is on one side and a hydroxide is on the
other, write water HOH.
Aluminum hydroxide + nitric acid gives aluminum nitrate + water
5. If you find yourself going from one side of the equation to the other using increasingly,
larger numbers, you probably have a formula wrong. Erase all the coefficients in front
of the molecules and check each formula carefully.
Balancing Equations
6. f all the elements are balanced except one and there is an even number of atoms of
that element on one side and an odd number on the other, double the first factor and
rebalance.
As written, the copper and sulfur atoms are balanced with one each but there
are two oxygen atoms in the factors and three in the products. Put a 2 in
front of the CuS and balance the equation.
Try this technique on the equation for the burning of acetylene, C2H2.
7. Remember that an equation can never be correct if there is a wrong formula written in
it.
8. Always us the smallest possible whole numbers to balance the equation.
TeO4-2 IO3-1
Matter
No Yes No Formula
Dia-
No Yes Binary
Acid in
Use Number
Use Oxida- Prefixes in
tion Memorize
Name as
# Chart Subscripts
and 5
Steps for
On one particular night, 80 boys and 60 girls arrive as singles. After a bit,
the dance floor is filled to its capacity of 45 couples and equilibrium is
established. When a couple stops dancing, it goes back to the reception room through the
revolving door to take their place. A dynamic equilibrium is established.
He: About the same, thank you. It must be the season for unstableness, I guess.
She: I guess so. My chemist said I might feel more stable if I would fill up my outer
shell.
He: Really? That’s what Argon said to me the other day. He has a full outer shell you
know.
She: Yes I know. He’s just like that noble Miss Neon. You know, they hardly ever asso-
ciate with the rest of us.
He: Not only that, but those inert nobles just don’t realize how hard it is to pick up even
just one electron these days. And I need seven!
She: Really? Gee, seven is a lot. I’m luckier I guess because I only need one.
He: What?
She: If you wouldn’t mind, you could give me your one lone outer electron; and then I
could be stable.
He: Big deal!! It helps you but what about me? Do you plan on giving me all eight?
She: No..but..well, your next closest shell would become your outer shell and its already
full.
He: That makes sense (thoughtful). That’s a great idea (excited). Let’s try it!!
(overjoyed) (Exchange electron, he drops outer shell, then show charge signs.)
She: Now that you mention it, neither do I. I feel sort of (pause) charged up.
She: I guess my idea for becoming stable wasn’t so good, Now what do we do?
He: I don’t mean to be forward but do you notice how the charged feeling leaves as
we……..well……..(embarrassed)………move closer?
(He atom moves toward she atom, then atoms touch and signs disappear)
She: Hey, it worked! The charged feeling is gone but now we can’t break away!
He: I guess we will stay together like this for a long time.
THE END
Rutherford (1911)
The following song, with lyrics by JJ Thomson was uncovered by Bruce Berman. The
tune is “Darling Clementine.
Ions Mine
Fill a paper cup with water. Wipe off the outside. Find the mass and record. Drink one
mouthful of water. Wipe off the outside. Reweigh the paper cup and water and record its
mass. Throw away the cup.
Data:
Mass of paper cup and water before drinking _________
Calculations:
Tare a condiment cup. Add an aspirin and reweigh. Record the mass. Return the aspirin
to the container.
Data:
Calculations:
Molarity
This Group Is To Make A _______ Molar Solution Of NaCl And Water.
__________Grams Of NaCl
Teacher: Each lab group had a different container to use instead of a volumetric. We
used recycled plastic bottles. We measured the desired volume of water and poured into
bottle. A mark was made at this point with a permanent marker
Massing Moles
1. Weighing A Mole: Name Of Substance
Go to your lab station and mass out a formula weight of your substance into given paper
cup. Pour into Zip-lock bag and label. Show your calculation. Show Work Here:
At your lab station there is a bag with a substance In It. The weight of the bag is given.
Using the balance determine the weight of the substance In the bag and the number of
moles of substance.
3. Calculating Mass From Density, Moles And Molecules In your basket are num-
bered graduated cylinders containing liquids. They are labeled.
Show Work:
Massing Moles
Read Volume.
Show Calculations:
Mass:___________
Calculate the number of molecules in the compound and number of carbon atoms. Show
Work:
Teacher:
Ideally you would set up 12 different lab stations so that each lab group would have differ-
ent substances. You would want to use both elements and compounds.
Chalk (calcium carbonate), salt (sodium chloride), sand (silicon dioxide), sulfur, aluminum
Foil (Aluminum), table sugar (glucose), copper, iron (steel wool) baking soda (sodium bi-
carbonate)
Examples of liquids:
Rainbow Tube
Background:
This activity can be used to introduce the concept of pH indicators. Vinegar is a dilute so-
lution of acetic acid (HC2H3O2). Sodium Carbonate (washing soda) has a pH greater than
7. The indicator used is a universal indicator. It is which is a mixture of indicators and
has a distinctive color at each pH. The sodium carbonate is more dense than the vinegar.
It sinks and neutralizes the vinegar as it moves down the column. The indicator in the
vinegar indicates how the pH is changing.
Materials:
Clear plastic straw glued at one end with hot glue gun, dilute vinegar + indicator solution,
sodium carbonate (washing soda solution), 96-well plate
Safety:
Wear Goggles. Sodium carbonate has a pH greater than 7. Keep away from eyes and
skin. Tube can be discarded in regular trash after a few days.
Directions:
1. Write initials on prepared straw (glued shut on one end) with permanent pen. Set
upright in 96-well plate.
2. Fill the straw nearly full of the vinegar-indicator solution with thin-stem Beral Pi-
pette. Vinegar is dilute acetic acid (HC2H3O2).
3. Deliver the solution down the side of the straw so that no air bubbles form.
Add 2 to 3 drops of the Na2CO3 solution to the straw with thin-stem Beral pipette.
Wait 10 to 15 seconds for this dense solution to sink, then add 2 to 3 drops more. Then
add 3 more drops. Na2CO3 has a pH > 7. It is more dense than the vinegar solution, so it
sinks to the bottom of the tube.
6. The indicator used is a mixture of many indicators. The color change is indicated
as follows:
We will use Yamada's Universal Indicator It exhibits the ROY G BIV color sequence in the
pH range 4-10
7. Have the teacher glue the other end. Store upright and observe over a week.
Rainbow Tube
Questions:
3. After the prepared straw sits for awhile, how does it look?
Materials:
1. Transparent plastic straws – Sam’s is a good source. Glue at one end with hot
glue gun. Let it sit for a few days.
Dissolve 0.005 g thymol blue, 0.012g methyl red, 0.060g bromthymol blue, and 0.10g phe-
nolphthalein in 100 ml ethyl alcohol. Add 0.01M sodium hydroxide until the solution is
green and dilute to 200 ml with distilled water.
Types of Reactions
1. Place two small pieces of zinc in a Petri dish. Add one dropper full of 0.1 M lead ace-
tate. Observe. Let stand until the end of the period. Observe. Empty into colander in
sink. Rinse Petri dish with tap water and then with distilled water.
Observation:
_______________________________________________________________________
_______________________________________________________________________
Equation: _______________________________________________________________
Demonstrations:
2. Heat a beaker containing one to two centimeters of water to boiling. Cover with a glass
plate and boil until beaker is filled with steam. Inset a burning splint into the steam and
observe the reaction.
Observations: ___________________________________________________________
3. Ignite a small piece of magnesium ribbon over a Bunsen Burner until it ignites. Do not
look at the flame.
Equation: _______________________________________________________________
4. Immediately transfer the product into the steam and return the glass cover. Add several
drops of phenolphthalein solution to the water.
Observations: ___________________________________________________________
Equation: _______________________________________________________________
5. React sodium bicarbonate (baking soda) with acetic acid (vinegar) in beaker. Cover..
Equation: _______________________________________________________________
Observations: ___________________________________________________________
7. Ignite another small piece of magnesium ribbon with Bunsen burner holding with tongs
as before.
Equation: _______________________________________________________________
Observations: ___________________________________________________________
Equation: _______________________________________________________________
Directions:
1. Have a member of each team come up and pull about 5 ml warm water into syringe.
2. Cover the end with stopper.
3. Pull the plunger out being careful not to pull entirely out.
4. Remove stopper.
5. Push the plunger back in.
6. This may cycle can be repeated.
7. Discuss what is happening and how this relates to Gay Lussac's Law.
Discussion:
Procedure:
Observations:
Conclusions:
Equation:
Demo: Take an empty unwaxed paper cup and heat In the flame of a Bunsen burner.
Directions:
• Take an unwaxed paper cup and fill 1/4 full of tap water.
• Put on wire gauze on ring and heat until water bolls.
Observations:
2. Paper Is a flammable substance which has to be heated to Its kindling temperature be-
fore It burns In air. It has a low heat capacity. It requires little heat to raise the tempera-
ture. Is the heat capacity of water high or low?
3. When there Is water In the cup, what Is the highest temperature the cup can be?
4. Therefore you know that the kindling temperature of the cup Is above what tempera-
ture?
5. When the temperature of a substance Increases the motion of Its particles Increases.
Intermolecular forces must be overcome. What kind of Intermolecular forces does water
have? Strong or weak?
Materials:
Procedure:
Add two drops of phenol red indicator to 250 mL water. Add 1M NaOH a drop at a time
until it turns red.
Pass flask around the room and have students talk into the flask. Have a story about the
person with the sexiest voice, etc wilI ,affect the magic water.
Discussion:
Eventually the CO2 from the student's breath will produce enough acid in the solution to
cause the color of the indicator to change.
This activity can be used to introduce the concept of acids and bases. The intended audi-
ence is the 5th grade through high school.
Reference:
Materials: aluminum soda can, tongs, Bunsen Burner, Large pan cool water, striker, 10
ml graduated cylinder
Safety: Be careful with Bunsen Burner and holding the soda can with tongs to heat.
Procedure:
Questions:
1. What phase changes (from what to what) did the water go through?
2. What happened to the volume of the gas in the can?
3. What happened to the pressure in the can? (increase or decrease?
4. Was energy taken in or given off?
5. How did the pressure cause the dramatic end?
Explanation:
When the can is heated the water turns to steam. It is a gas. It fills up the entire can.
When the can is suddenly cooled the steam turns to water – a phase change.
The water has occupies much less volume. The volume decreased. The pressure in the
can decreased. The pressure in the can is now less than the pressure outside the can.
Marshmallow in a Syringe
Materials: 60 ml syringe with Luer Lock, a mini-marshmallow
Procedure:
1. Remove the Luer lock from the syringe and pull out the plunger.
2. Put the marshmallow on top of the plunger and insert back into the syringe. Do not
mash marshmallow.
3. Put Luer Lock on tip of syringe.
4. Gently pull the plunger back and forth and observe the marshmallow.
5. BE CAREFUL NOT TO PULL THE SYRINGE APART.
Explanation:
The marshmallow is filled with air. When you decrease the volume, you increase the
pressure. – Boyles Law
Electroplating Copper
Materials:
200g of CuSO4. 5H2O, 17.2 ml of conc. H2SO4, 8.25 ml of 0.1M HCI. Dilute to 1 liter.
Safety:
Wear safety goggles and aprons. The plating solution is very acidic. Neutralize with bak-
ing soda if spilled.
Stabilize the film canister by using Buret clamp to attach to ring stand. Use acetone to
clean nail in well -ventilated area, under hood if possible. Reuse acetone.
Procedure:
1. Clean object to be plated with acetone under the hood. This can be a nail or another
metal object.
2. Assemble lid of cell. Plastic strip is in middle and copper strip to one side and nail or
object in the other.
3. Attach bottom of film canister to ring stand with Buret clamp.
4. Fill canister 3/4 full of copper sulfate solution and tightly seal with assembled lid.
5. Connect battery to cell with leads. Connect the object to be plated to the positive
terminal of the battery and the copper strip to the positive terminal of the battery.
6. Wait 1 minute. Carefully disconnect battery and remove lid of cell. Observe object
(nail) plated. Record
Observations: Remove plated object. Rinse lid with distilled water in water bottle. Pour
back copper plating solution into original container for recycling.
Recently there have been numerous advertisements for antacids on television. These
products are used to neutralize stomach acids. How do these antacids work? Most ant-
acids usually contain carbonates, bicarbonates, or hydroxides. All act as bases and have
a neutralizing effect on acids. The carbonates and bicarbonates also produce CO2 when
they react with acids. This buildup of gas in the stomach causes the expulsion of the gas,
the burp. This also provides relief. Many antacids contain calcium compounds are not
very soluble in water. This increases the possibility of an antacid being absorbed into the
bloodstream. If too much base is absorbed into the bloodstream a condition called alkalo-
sis occurs.
In this experiment, you will use HCl to neutralize the antacids. You will determine which
antacid is most effective in neutralizing the acid. Real stomach acid is HCl with a pH
range of 0.9 to 1.5. We will use 1.0 M HCl in this lab.
The process of gradually adding an acid to a base or a base to an acid until neutralization
occurs is called titration. The number of milliliters it takes to neutralize the acid or base is
carefully measured. An indicator is used to show the endpoint, the point at which neutrali-
zation occurs. Indicators are organic compounds, which may be different colors at a dif-
ferent pH. The colors at a different pH vary according to the indicator. It is important that
the color change in the indicator can be detected when the pH is changed. Crystal Violet
has been chosen for this titration. Below pH 0.8 it is yellow. Between pH 0.8 and pH 1.1 it
is green. Above pH of 1.1 it is blue. Since the pH range of the stomach is 0.9 to 1.5, this
is a good indicator to use. What you are trying to do with the antacids is to get the pH of
the stomach back to a normal pH range of 0.9 to 1.5.
In this lab, the more milliliters of HCl it takes to neutralize the antacid, the more effective
the antacid is in neutralizing the acid in the stomach.
Materials:
1.0 M HCl, water bottle filled with distilled water, 0.04 gram samples powdered antacids, 1
ml syringe, microstopcock (Flinn # AP9159), microtip Beral-type pipet, scissors, condiment
cup for waste, 50 ml Erlenmeyer flask, crystal violet indicator in pipet, stirring rod, weigh-
The Dynamic Duo
E—4
Safety: Wear goggles at all times. HCl is corrosive. If spilled, neutralize with baking
soda.
Procedure
1. Mass 0.04 gram sample of powdered antacid in weighing dish or 1 oz condiment cup.
2. Transfer dry powder to a 50 ml Erlenmeyer flask or leave in condiment cup
3. Add a few ml of water from water bottle to rinse the weighing dish and add this to the
Erlenmeyer flask. Repeat rinsing a second time. All of the solid may not dissolve.
The antacid contains some “fillers” that may be insoluble. All of the active ingredients
will dissolve as HCl is added.
4. Add 3 drops of crystal violet indicator. Note the color. This is a basic solution.
5. Cut off the tip and the top of the microtip Beral-type pipet to form a funnel.
6. Put tip of microtip Beral-type pipet on the end of the microstopcock and attach the
stopcock to the bottom of the syringe.
7. Remove the plunger from the syringe and put the funnel you formed from the microtip
pipet on top of syringe.
8. Steps 5 ,6,and 7 may have been done for you. Attach the syringe to ring stand with the
clothespin holder.
9. Close stopcock. Place waste condiment cup underneath syringe.
10. Fill the red dot syringe buret with 1M HCl with a thin-stem pipette. Check to see that
there are no bubbles. Allow some of the solution to drain into the waste container to
fill the stopcock and the tip with solution. Refill the syringe buret until the HCl level is
at or just below the 1.00ml mark. Record the initial reading of HCl .
11. Place the Erlenmeyer flask or condiment cup with the antacid and indicator beneath tip
of stopcock. Open stopcock so that one drop of acid comes out at a time. Gently swirl
Erlenmeyer flask. Add HCl until the color remains a definite blue with a tinge of green.
Immediately close stopcock and take reading. Record as final reading of acid.
12. Empty contents of Erlenmeyer flask into waste container. Rinse several times with
distilled water until clean.
13. Repeat procedure with another antacid.
Data Table
Initial volume of
acid ml ml ml
Final volume of
acid ml ml ml
Volume of acid
reacted ml ml ml
Questions:
What was the color of the indicator in the basic solution? __________________________
Which antacid was the best acid neutralizer and why? ____________________________
_______________________________________________________________________
_______________________________________________________________________
Vitamin C, ascorbic acid, is produced naturally by plants and animals except for humans.
A deficiency in Vitamin C causes a disease known as scurvy, the symptoms of which are
bleeding, spongy gums and a tendency to bruise easily. Because our body has a limited
ability to store Vitamin C, it is necessary to eat foods, which contain Vitamin C as part of
our daily diet. Foods that contain significant amounts of Vitamin C include citrus fruits and
some green plants such as spinach and green peppers. The recommended Dietary Al-
lowance of vitamin C is 60 mg per day.
Fruit juices naturally contain other acids such as citric acid in addition to ascorbic acid;
therefore, an acid-base titration cannot be used to determine the amount of ascorbic acid,
Vitamin C. In this lab you will determine the amount of Vitamin C (ascorbic acid) in 1
serving (6 oz) of orange juice, apple juice or other Vitamin C containing juices by titration
of the ascorbic acid in the juice with an iodine solution. The chemical reaction involved is
the oxidation of ascorbic acid by iodine to dehydroascorbic acid. The end point of the ti-
tration will be determined by the formation of the starch-iodine blue-black complex when
an excess of iodine becomes present. As long as ascorbic acid is present, the iodine is
converted to the colorless iodide ion. Once the ascorbic acid has all reacted, the iodine
forms the blue-black complex with the starch indicator.
The micro-scale titration will be done using 1 ml syringes as burets. The concentration of
the iodine solution will be determined by titrating a standard solution of ascorbic acid,
which contains 1 mg ascorbic acid per ml of solution. From this titration’s data, you will
calculate the mg Vitamin C equivalent to one ml of the iodine solution. Calculations are
simplified because iodine and ascorbic acid react in a 1:1 mole ratio. If 0.72 ml iodine
were used to titrate 0.85 ml Vitamin C then:
(equation 1)
Safety Precautions:
Goggles and aprons must be worn. The iodine solution may stain hands or clothing and
can irritate skin. Ascorbic acid is not considered hazardous, however, students should
wash their hands thoroughly after handling. Food items, once brought into a lab, are con-
sidered chemicals and, as such, should not be ingested.
Disposal:
The small amounts of the solutions may be disposed of down the drain. Any left over io-
dine solution should be saved for use in future labs.
Procedure
1. Fill the green dot syringe with the standard ascorbic solution. Set the waste container
under the syringe and dispense the solution into the waste container until the liquid
level is on or just below the 1.00 mark. Read the volume of ascorbic acid solution and
record it in the data table as the initial volume of ascorbic acid.
2. Place the 25 ml flask under the ascorbic acid syringe. Allow about 0.70-0.80 ml of the
solution to flow into the flask. Read the level of the solution in the syringe and record
as the final volume of ascorbic acid.
3. Place the microchem support in a corner well of the 96 well reaction plate. Place the
syringe buret (purple dot) in the support. Another option, attach clothespin microchem
support to normal ringstand. Refer to photographs in handout.
4. Place the syringe buret (purple dot) in the microchem support. Fill the syringe with the
iodine solution using a thin-stem pipet. Check to see that there are no bubbles. Al-
low some of the solution to drain into the waste container to fill the stopcock and tip
with the solution. Refill the syringe with iodine so the level is on or just below the 1.00
mark. Read the volume of iodine and record in the data table as the initial volume of
iodine.
5. Add 2 drops of starch to the ascorbic acid in the flask. Swirl to mix.
6. Place the flask under the iodine (purple dot) syringe buret. Add iodine drop by drop
with swirling to mix until the solution turns blue-black and remains blue-black after mix-
ing. Read the level of the solution to the nearest 0.01 ml and record as the final vol-
ume of iodine.
The Dynamic Duo
E—8
Initial volume
Ascorbic acid ml ml ml
Final volume
Ascorbic acid ml ml ml
Volume ascorbic
Acid used ml ml ml
Initial volume
Iodine solution ml ml ml
Final volume
Iodine solution ml ml ml
Volume iodine
Solution used ml ml ml
mg Vitamin C
equivalent to 1 ml I2
Calculations:
1. Calculate the mg Vitamin C equivalent to 1 ml of the Iodine solution. (See equation 1.)
Show work below for each trial and place your answer in the data table above. Calcu-
late the average for the 3 trials and place your answer in the data table above.
Initial volume
Juice ml ml ml
Final volume
Juice ml ml ml
ml juice used ml ml ml
initial volume
iodine ml ml ml
Final volume
Iodine ml ml ml
ml iodine used
ml ml ml
mg Vitamin C
per 6 oz serving mg mg mg
2. Calculate the mg of Vitamin C found in a 6 oz. Serving of each juice. (See equation # 2) Show
work below and place your answers in the data table above.
4. Was this your expected result?______ Explain why this might be true. (Hint: Read the label on
the juice container.)
Standard ascorbic acid solution: Dissolve 0.10 grams of ascorbic acid in enough dis-
tilled water to make 100 ml of solution. This solution should be made fresh each day. An
alternative method is to make the ascorbic acid by crushing a 100 mg Vitamin C tablet
and adding enough water to make 100 ml of solution. One ml of these solutions will con-
tain one milligram of ascorbic acid.
Iodine solution: Fill a 250 ml volumetric flask about ½ full with distilled water. Dissolve
0.10 g potassium chlorate and 10.00 g of potassium iodide in this water. Add 25 ml 1M
sulfuric acid. Swirl to mix. Then add 0.10 g of iodine crystals and dissolve. Add enough
distilled water to make 250 ml of solution. The iodine is slow to dissolve. Don’t plan to
make it at the last minute.
Starch solution: Place about 100 ml of distilled water in a beaker. Generously spray
with spray starch (from the grocery store) for a minute or so. Stir and allow foam to dis-
perse. The solution should be translucent or milky looking. If necessary spray a second
time. (An alternative is to boil water, make a paste of powered starch and cold water and
stir the paste into the boiling water.)
Teaching Tips:
1. Remove the plunger from the syringe. Fit the stopcock on the bottom of the syringe.
Cut the tip from a microtip pipet about 0.5 cm above the tapered end and fit the tip on
the end of the stopcock.
2. The amounts of Vitamin C in different kinds of juice may prove to be the same be-
cause of the addition of ascorbic acid as an ingredient. Read the labels and chose
those which do not have added Vitamin C.
3. The orange juice used should be low pulp or strained so that the pulp does not clog
the stopcock. Baby food juices provide a convenient source of no pulp juice: however
most have added ascorbic acid causing the various juices to have approximately the
same amount of Vitamin C.
4. Juices other than apple, orange, or lemon can be used in this experiment provided
they are light in color. Using darker colored juices, such as grape juice, will make it
difficult to determine the end point of the titration.
5. The Vitamin C content of foods decreases if stored uncovered at room temperature or
higher temperatures. Vegetables cooked in water lose much of their Vitamin C con-
tent.
6. An extension of this experiment could study and graph the decline in Vitamin C con-
centration left open in the classroom for a period of days.
7. Another extension could compare the Vitamin C content in canned, frozen, bottled and
fresh squeezed orange juice.
8. The cost of Vitamin C from different sources could be studied.
Boyle’s Law
Purpose:
In this lab you will measure the volume of a confined gas in a closed syringe inside a 0.5
liter plastic soft drink bottle. Pressure will be increased by using a Fizz-Keeper©. .
Materials:
Directions:
1. Remove the plunger from the syringe and apply a thin application of silicone lubricant
to the black part of the plunger. Reinsert the plunger into the syringe.
2. Adjust the position of the plunger to the 3.0 ml mark.
3. Place the syringe cap on the syringe trapping 3.0 ml of air in the syringe.
4. Place the syringe in the soft drink bottle and screw the Fizz-Keeper © on the bottle.
Record the beginning volume as 3.0 ml.
5. Increase the pressure in the bottle by pumping the Fizz-Keeper © 10 times. Read the
volume of the air in the syringe.
6. Pump 10 more times and record the volume. Continue pumping 10 time and reading
the volume for a total of 10 volume readings.
7. Plot a graph of pressure (# of strokes) vs. volume.
Data Table:
PRESSURE (#STROKES) 0 10 20 30 40 50 60 70 80 90 100
VOLUME OF AIR 3.0
Teachers Guide
Scope & Sequence: Can be used to 1ntroduce Boyle’s Law in the unit on gas laws or to
follow - up shortly after the textbook introduction.
Preparation & Tips: Cut off the “wings” at the top of each syringe. Fizz-Keepers may be
purchased at discount stores. They are also available from Flinn.
Hazards: Release pressure by twisting the cap slowly at end of the measurements.
Disposal: None. Keep syringes & syringe caps for next year.
This lab provides students the opportunity to observe noxious oxides that are a major fac-
tor in pollution that otherwise could not be observed in a high school laboratory. Optional
exercises permit the student to design his ova environment and to be able to observe fac-
tors that effect pollution.
The atmosphere is a warm blanket that helps to maintain conditions suitable for life as we
know it. Oxygen is one of the most important elements in the atmosphere because organ-
isms need oxygen to stay alive. Oxides are binary (two elements) compounds containing
oxygen and one other element. They are abundant in the earth's crust.
Three major categories of oxides that are also air pollutants are:
Carbon dioxide and carbon monoxide are produced by the combustion of organic materi-
als, primarily gasoline and other fossil fuels.
Sulfur compounds, mostly S02, are among the most unpleasant and harmful of the com-
mon pollutant gases. About 80 % of all the S02 generated comes from the combustion of
fossil fuels. They are also produced by burning coal and from oil refineries. These com-
pounds form acids in moist air.
3. Oxides of nitrogen (NO2, etc.) come from fuel burning (power plants and automobiles).
In all combustion reactions in the air, nitrogen combines with the oxygen.
Nitric oxide (NO) reacts readily with O2 to form NO2 when exposed to the air.
The combustion in the automobile is the worst offender. At the high temperatures of the
automobile engine NO is formed. NO acts as a catalyst for ozone destruction and is in-
volved in the production of smog in addition to the acid rain production. The amounts of
nitrous oxides can range from 1 gram per km (kilometer driven) for a new passenger car
to over 20 grams per km (kilometer driven) for an old diesel truck. The anthropegenic
(man-made) nitrous oxides are large amounts compared with the natural emissions such
as those from forest fires. Amounts are increasing as the global consumption of fossil fu-
els and the number of cars, trucks and SUVs increase. The geographic distribution of ni-
trous oxide emissions reflects large power plants and population density in the northeast-
ern United States and California. Nitrogen dioxide (NO2), the brownish-yellow gas in pol-
luted air, causes respiratory distress and reacts with substances in the atmosphere to
form toxic compounds.
Purpose:
Using methods of small -scale chemistry demonstrated by Dr. Steven Thompson of the
Department of Chemistry of Colorado State University, noxious oxides of sulfur and nitro-
gen will be generated and their contribution to acid rain will be observed.
Equipment:
Two polystyrene Petri dishes with access port sealed with scotch tape, white grid paper
Precautions/Hazards:
Goggles and aprons should be worn when using chemicals. Since trace amounts of
SOx and NOx gases will be generated Petri dishes should be opened and closed only
according to directions. Be sure to terminate the NOx and SOx gases, as directed with
ammonia when finished. Care should be taken when using solutions of acids and am-
monia.
Procedure:
1. Prepare each Petri dish by heating the tip of a triangular file, glass rod or nail, or heat
an old soldering iron. Use to melt a hole (access port) about 1 cm from the outside rim of
the Petri dish. THIS MAY BE DONE BY THE TEACHER. Seal the port with scotch
tape. Place two clean dry Petri dishes with sealed access ports on the grids. At the po-
sitions indicated drop the following solutions:
KNO2 KNO2
Na2SO3
Na2SO3
Bromcresol Bromcresol
2. In dish 1 and dish 2 add drops of Na2SO3, KNO2 and bromcresol where indicated.
3. In dish 2 generate SOx and NOx by adding 2 drops of 2M H2SO4 first to Na2SO3 and
then to KNO2 by rotating hole in top of petri dish and removing tape and replacing tape
first over Na2SO3, and then KNO2.
4. Observe the acidity probe. What color does bromcresol green turn in the presence of
an acid? Compare with Control. What acids do you think were formed?
5. Stop the reaction by lifting the portal tape and adding 1 drops of ammonia.
Disposal:
Use a wash bottle to flood the system with water at the sink. Rinse Petri dish with distilled
water and dry with paper towel.
You are a research scientist preparing studies of acid rain. In Petri dishes prepared like
the ones above, design experiments using what you have learned from this lab and using
chemicals from this lab to (1) compare the rates of transport of SO2 compared to NOx
<Hint: use a succession of acidity probes radiating out from the source noxious gases to
determine the rate of transport (how fast it moves). (2) Prepare a graph to show the aver-
age of several experiments (3) Set up sinks, chemical barriers that might affect the move-
ment. This could include sandy areas, grasslands, golf courses, styrofoam or different
rock like limestone or quartz, lakes. Keep the area under the port in the Petri dish clear so
you can add more acidity probes to monitor acidity over a period of time. Record your
data and compare with other microenvironments to draw conclusions. Write a short ab-
stract and summary for your project. Write a short hypothesis for each attempt and a con-
clusion based on your experimentation. Include what areas are in most danger by acid
deposition.
1. Write the equations for the oxidization of sulfur dioxide to sulfur trioxide and for the
formation of the acid when the sulfur trioxide comes in contact with water.
2. From the results of the acidity probe after the addition of aqueous ammonia to the
above reaction, explain why aqueous ammonia can terminate the production of sulfu-
ric acid.
7. What are natural buffers present in lakes that can neutralize acid deposition?
1. 2 SO2 + O2 → 2 SO3
SO3 + H2O → H2SO4
2. Aqueous ammonia is basic.
3. Unpolluted rain is saturated with atmospheric carbon dioxide and thus has a pH of
5.6.
4. Oxidation of carbon, nitrogen, and sulfur causes acid reposition.
5. Anthropogenic pollution is of a much greater magnitude and is increasing. Also, the
atmosphere is more sensitive because it is a much smaller reservoir than the litho-
sphere or hydrosphere.
6. Key atmospheric pollutants are sulfur and nitrous oxides.
7. Buffers in lakes are calcium and magnesium bicarbonate and organic acids entering
from the watershed.
8. Highest emissions of nitrous oxides occur in northeastern. US population density is
greater as is use of the automobile.
9. 1 gram nitrous oxide per km (kilometer) driven.
References:
Electrolysis
Introduction:
Materials:
Battery, 0.1M Na2SO4 with Bromothymol Blue indicator to produce a green color,
phenophthalein, 600 ml beaker or cut off 2 or 3 liter bottle with flat bottom, 2 small test
tubes(75 x 100 mm), 9 V battery.
Procedure:
Fill the 600 ml beaker about 3/4 full with Na2SO4. Take 2 small test tubes and fill with
solution in beaker allowing them to stay under solution. Set the wax coated 9 V battery on
bottom of the beaker of Na2SO4 with bromothymol blue indicator. The solution should b
green in color. Carefully move the test tubes into an upside down vertical position over
battery terminals without losing liquid. Note which test tube is over which terminal. Allow
some metal of each terminal to be exposed. As soon as you can see a difference in color
and water level in test tubes, put a finger over the end of each tube and lift each out. Re-
cord color of tubes and ratio of gas in tubes. Remove battery and rinse with water. Return
Na2SO4 to the wand Na2SO4 container to be recycled.
Questions:
1. Compare the volume of gas collected at the (+) electrode to the volume of gas col-
lected at the (-) electrode.
2. What color is the solution at (-) electrode? What does this indicate about the pH of the
solution is this test tube? Is this the anode or the cathode?
3. What color is the solution at (+) electrode? What does this indicate about the pH of the
solution in this test tube? Is this the anode or the cathode?
4. Write balanced equations for the two half reactions and the overall equation for the
electrolysis of water.
Micro-Mixture Separation
Introduction:
Nature provides us with elements and compounds; however, they are seldom found in
their pure forms. Most often these substances are part of a mixture. The substances in a
mixture are not chemically bound to each other — sort of like the parts to a puzzle —but
are scrambled around like a handful of different coins. To make use of these substances it
is necessary to separate them from each other. This separation process requires knowl-
edge of the physical properties of these elements and compounds, such as density, solu-
bility, melting point, and so on. This process requires knowledge of laboratory separation
techniques, too. For example, to recover a dry solid, it is necessary to evaporate the liquid
from the filtrate.
In this experiment you will be asked to separate a micro-mixture of salt, sand, iron filings,
sawdust, and benzoic acid (a white solid that is soluble in hot water, but relatively insolu-
ble in cold water). No procedure will be given; it will be up to you to devise one. You are
to design an experimental procedure that will separate the mixture, and recover all five
components in their natural states (all are dry, granular solids).
Materials:
You will be given five small test tubes (four, empty and clean, the fifth, containing your
mixture). All five must be returned empty and clean when you are finished. The compo-
nents of the mixture should be retained in small cellophane baggies, taped closed, If there
are any questions regarding the safety of any of your procedures, ask the instructor first.
Procedure:
1. In this experiment, you are to provide the procedure. To obtain any laboratory equip-
ment, see your instructor first.
2. Some suggested equipment: beaker, condiment cup, filter paper, evaporating dish, test
tube, stirring rod, magnet, wax paper, heat source, funnel, Beral pipet, paper towel, dis-
tilled water, apron, goggles and graduated cylinder
Caution: For your own protection as well as your neighbor’s, before beginning the
laboratory work, submit your procedure to the teacher for approval.
Data:
Micro-Mixture Separation
5. Discussion of the sources of error in your separation and recovery techniques. Also
indicate how you might do things differently to eliminate these errors.
Teachers’ Guide
Filter paper
Small funnels
Distilled water
Bunsen burners or hot plates
Wax paper
Magnet
Beaker
Condiment cup
Evaporating dish
Paper towel
Apron, goggles
Stirring rod
Ice water
Graduated cylinder
Hints:
1. Writing up of the procedure and performing the actually laboratory work ought to take
place on different days. This will give the teacher time to properly check each proce-
dure.
2. Do not be afraid to try this experiment. The ingenuity of the students can be amazing.
They are excited and felt good when one of their separation techniques worked and
they recovered one of the materials in their mixture.
3. A lab penalty could be assessed to those students who absolutely had to have a new
set of materials.
Background Information:
Gases dissolve better in cold water. Gases dissolve better under pressure. Agitation
makes them come out of solution. Carbon dioxide is very soluble in water. Lowering the
temperature and increasing the pressure makes it more soluble.
CO2 (g) + H2O (l) ↔ CO2 (aq) + H2CO3 (aq) ↔ H+ (aq) + HCO3- (aq)
Precautions:
Materials:
Procedure:
1. Generate 60 ml carbon dioxide in syringe using Chemistry of Gases method.
2. Push out 20 ml. Leave 40 ml of carbon dioxide in syringe.
3. Put about 25 ml deionized water into plastic cup. Add a few drops of red food color-
ing. ( Bromcresol Purple)
4. Take the syringe of carbon dioxide.
5. Remove Luer Lock.
6. Pull up 10 ml of colored water (Indicator Water)
7. Push plunger forward and place nail across barrel and through plunger.
8. Place in prepared ice-salt-water bath for fifteen minutes.
9. Remove from bath and wipe dry with paper towel.
10. Place across overhead turned on for a few minutes. Pull out plunger to increase vol-
ume. Place nail through top hole in plunger only.
Questions:
1. What are you observing happening in the syringe when it is on the overhead?
2. Write the equation.
9-ounce (250 ml) plastic cup, special syringe with nail hole
Chemicals:
Instructions:
Transfer 40 ml CO2 (g) into the special syringe. Pull 10 ml water into the syringe and install
the syringe cap. Push the plunger inward until the nail can be inserted into the middle
hole in the plunger as shown in the figure. Place the syringe into a large container of
crushed ice and water. Allow the system to come to equilibrium over the next hour. Re-
move from the ice and allow to warm to room temperature for 15 minutes. Next pull the
plunger up to the 50 ml mark and insert the nail in the hole near the seal. Tap the syringe
on the countertop. You will see bubbles of CO2 swirling out of solution. The equilibrium
involves CO2 as the primary aqueous species. Approximately 1 CO2 in 600 exists as
H2CO 3 (aq):
CO2 (g) + H2O (l) ↔ CO2 (aq) + H2CO3 (aq) ↔ H+ (aq) + HCO3-(aq)
Sublimation point -78.5°C, colorless, odorless, sharp sensation to the nose when inhaled.
Industrial Production:
Industrial Uses:
Refrigerant (accounting for over 50%), fire extinguishers, the soft drink industry, chemical
reagent to make other compounds.
Solubility of CO2:
The solubility of CO2 (g) in water is 3.48 g per L at 0°C and 1.45 g/L at 25°C.
Instructions:
To determine the molar mass, simplest formula and molecular formula of butane
Background Information:
Avogadro’s Hypothesis states that equal volumes of 2 gases at the same temperature and
pressure contain equal numbers of molecules. For example: The molar mass of hydrogen
is 2.0 g. If a sample of hydrogen gas has a mass of 4.00 g and a same volume of gas X
has a mass of 60 g, then by a simple ratio we can find the molar mass of gas X. In this
lab, the same idea is used where you will find the masses of 2 equal volumes of 2 different
gases, air (molar mass = 28.9 g) and butane (molar mass to be found.) Using a syringe,
one can measure the volume of a gas very accurately. In this lab we will use a can of bu-
tane used to refill lighters as the source of butane. We used Ronson brand from Wal-
Mart. You may have to ask for it.
By measuring the temperature, the pressure of the butane and the mass of the butane,
the Molar Mass of the Butane can be calculated using the Ideal Gas Law. PV = nRT.
Precautions:
Dispense and dispose of butane under hood. Wear goggles and apron. No open flames.
Use the same syringe and Luer cap
Materials:
Refill can of butane, 60 ml syringe lubricated with silicone lubricant, analytical balance ac-
curate at least to .01 of gram, piece of plastic or rubber tubing 1/8 ID 2 cm long icemaker
tubing), thermometer, barometer
Procedure:
Find the mass of the empty syringe with Luer cap on.- Zero volume
Using the same syringe, take the cap off and fill the syringe with 60 ml of air. Put on cap.
Find the mass. Record.
Empty the syringe of air. Working in the hood, fill the same syringe with 60ml butane by
attaching the piece of tubing to the end of the butane can. Place the other end of the tub-
ing on the tip of the syringe. Push down on the syringe until you have 60ml of butane in
the syringe. Recap the syringe. Find the mass of the capped syringe which is filled with
butane and record.
Calculations:
1. From your data find the mass of air and the mass of butane.
2. If the molar mass of air is 28.9 g, find the molar mass of butane.
3. If butane is 82.8 % carbon and 17.2 % hydrogen, find the simplest formula of butane.
4. Find the molecular formula of butane.
5. Using the mass of the butane, the barometric reading, volume of butane and the tem-
perature and the Ideal Gas Law, calculate the Molecular Mass of the butane.
Use the Molar Mass calculated from atomic weights to determine the % error in the molar
mass of butane calculated in calculation # 4 and Calculation # 5.
Questions:
Reference:
Composition of Hydrates
Introduction:
Hydrates are ionic compounds (salts) that have a definite amount of water as part of their
crystal structure. This water of hydration is released as water vapor when the hydrate Is
heated. The remaining solid is known as the anhydrous salt. Many compounds contain
water in specific molar proportions compared to the non water part of the compound. The
weight proportion of water in the compound is thus a constant for the compound. Copper
(II) sulfate is one of these compounds. Usually, as in the case of hydrated copper (II) sul-
fate, this water will be lost if the substance is gently heated. It is then possible to deter-
mine the proportion of water present in the compound, by weight, and thus the number of
water molecules per formula unit of the hydrated copper (II) sulfate.
The change from copper II sulfate hydrate to anhydrous salt is accompanied by a change
In color.
CuSO4·xH2O → CuSO4 + x H2O
blue white
Safety:
Wear goggles and aprons. Soluble copper compounds are poisonous. Wash hands etc.
if you get on body. Clean up spill with damp paper towel.
Materials:
Balance, ring stand, ring, bunsen burner, lighter, curved wire gauze, powered CuSO4,
straw, dessicator ( you can make one out of coffee can), test tube holder, Beral Pipette,
water
Procedure:
1. Obtain 3 (10 x 75 mm) Pyrex test tubes. Make sure they are clean and dry.
2. Using a sharp pencil, mark the test tubes 1 through 3 on the white label surface.
3. Carefully weigh each test tube as precisely as you can and record the weights Imme-
diately In your data table.
4. Using the end of a clean straw, add a small pea size quantity of the hydrated copper
(II) sulfate to each test tube.
5. Weigh each test tube again and record the weight Immediately In the appropriate
space on the data table. The weight of the copper sulfate + the test tube should be
between at least 0.2 grams more than the weight of the empty test tube but not more
than 0.5 grams more than the weight of the empty test tube. If necessary add more
copper sulfate or take out part of the copper sulfate using the straw and reweigh the
test tube.
6. If you have spilled any of the compound on the balance or on the table top you must
Composition of Hydrates
IMMEDIATELY clean It up with a damp paper towel. SOLUBLE COPPER COM-
POUNDS ARE POISONOUS.
7. Set up a ring stand, a ring, a ceramic centered wire gauze and a Bunsen burner. Place
the 3 test tubes, side by side, on the wire gauze so that they will not roll off.
8. Light the Bunsen burner and adjust it to get a hot flame. Place the burner under the
wire gauze so that the tip of the flame is about one inch below the wire gauze
9. After heating for about 30 seconds, carefully grasp the base of the burner and move It
back and forth under the five test tubes. This Is to prevent any one test tube from get-
ting too hot. (If the compound Is heated too strongly, the water will be driven off and
then the anhydrous compound will begin to decompose, giving off sulfur oxides, which
are hazardous gases.)
10. When the color of the residue in each test tube has lost its blue color and appears to
have a uniform grayish white, turn off the Bunsen burner.
11. Using a test tube holder, remove each test tube from the wire gauze and place imme-
diately into a dessicator. (As the residue cools down, It will begin to absorb water from
the humidity In the air. Placing the test tubes in the dessicator will prevent this.)
12. Allow the test tubes to remain in the dessicator for ten minutes to cool. The balance
will not operate properly if the test tubes are still hot. During this time be sure that all
weights have been entered in the computer.
13. Remove each test tube, in turn, from the dessicator and weigh it. Record each weight
in the appropriate space in your data table and enter the weights in the computer.
14. After you have weighed each test tube, and when you are sure that it has cooled suffi-
ciently to handle, stand one in your hand so that the bottom of the tube is cupped in
your palm. Drop one or two drops of water from a pipette onto the solid and observe
what happens.
15. Dispose of the chemical remaining In the test tubes In the container marked "used
copper sulfate. Wash the test tubes and rinse them.
16. When the ring clamp and ceramic centered wire gauze have cooled, disassemble the
heating apparatus and return each Item to Its appropriate location
Composition of Hydrates
Report Page
% Water
What is the color of the copper(II) sulfate compound before It is heated and after It is
heated ?
Before After
What happens when water is added to the anhydrous copper (II) sulfate?
Composition of Hydrates
4. Calculate the average weight percent of water in the five samples. Show work.
5. Suppose one of the samples was not heated sufficiently to drive off all of the water.
How would the weight percent of water calculated for this sample from the lab data
compare to the true value for the weight percent of water in hydrated copper (II) sul-
fate ?
_______________________________________________________________________
_______________________________________________________________________
8. The true value for the percent of water of water in this hydrate is 36.0 %. Calculate
your % error. Show work. and place your answer In the blank below.
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
Optional
9. Calculate the coefficient for the water of hydration, x, in the formula CuSO4 xH2O. Show
all work.
Composition of Hydrates
Teacher’s Guide
Soluble copper compounds should not be flushed down the drain unless municipal. Water
system is designed to treat for such ions. (Lots of soluble copper compounds go into the
system in an effort to clear tree roots from clogged pipes.)
This laboratory was adapted by Eva Lou Apel and Barbara Schumann from a lab scaled
down from a similar lab found in CHEMISTRY IN THE LAB by Masterson, Slowinski and
Walford, 1987 and Woodrow Wilson National Fellowship Foundation Institute in Chemis-
try.
Located at each lab station are 16 different zip lock bags. Without opening the bags
(16 atom containers) you must count the subatomic particles and record all of the statis-
tics. Then determine which isotope of an atom that you have.
Questions:
_______________________________________________________________________
Reference:
In a balanced chemical equations all reactants and products must be represented by sym-
bols or formulas. The total number of atoms of each element must be the same on each
side of the equation to satisfy the Law of Conservation of Mass.
NaHCO3(s)+HCI(aq) → NaCI(aq)+CO2(g)+H2O(g)
A known mass of sodium hydrogen carbonate will be reacted with excess hydrochloric
acid. Knowing the mass of NaHCO3(s) that reacts, we can determine from the balanced
equation the mass of NaCl that should be produced. We compare this theoretical value
with the actual experimental mass of NaCl produced.
This experiment should aid In the understanding of the mole-mass relationships that exist
in a chemical reaction and in the Interpretation of a balanced chemical equation.
Purpose
Compare the experimental mass of a product of a chemical reaction with the mass pre-
dicted for that product by calculation.
Safety
Materials
Evaporating dish, sodium hydrogen carbonate, 6M HCl, spoon, Beral Pipette for acid, bal-
ance, ring stand, ring, wire gauze, Bunsen burner, lighter, tongs or damp paper towel, wa-
ter bottle distilled water
Procedure
1. Find the mass of the evaporating dish. This is mass (a) In your data table. Be
sure to record the proper number of significant figures.
3. Add between 1/3 and 1/2 spoon of sodium hydrogen carbonate (NaHCO3) to
evaporating dish. Record this mass as (b) in your data table.
5. Set up the ring stand, ring, and wire gauze. Place the dish on the wire gauze.
6. Holding the burner in your hand, gently heat -the evaporating dish. Use a low
flame- and move the burner back and forth to avoid spattering. When almostt all the liquid
Is gone, heat gently by moving the burner back and forth until no liquid remains. Allow the
dish to cool for 10 minutes.
7. Find the combined mass of the evaporating dish and its contents (NaC]).
Record this mass (c) in your data table.
8. Rinse the evaporating dish. Wash It with detergent and water, rinse with tap water
and then with distilled water. Then flame dry the clean evaporating dish by putting on wire
gauze and heating it in the hot part of a burner flame for about 5 minutes. Leave for next
group.
1. According to the balanced equation for the reaction used in this experiment, what is the
ratio of moles of NaHCO3 reacted to moles of NaCl produced?
2. What is the ratio of moles NaHCO3 actually reacted to moles of NaCl actually produced
in your experiment? (Use the information on moles produced from calculations 3 and 4
above. Divide numbers of moles. Do not leave as 2 decimal fractions.)
3. Using the balanced equation, calculate the mass of NaCl you would expect to get when
the amount of NaHCO3 you used in the lab are reacted with HCI.
4. Compare the amount of NaCl actually produced In your experiment with the amount
5. If the masses of all but one of the substances that take part in a chemical reaction are
known, explain why it is possible to determine the unknown mass by subtraction.
Introduction:
All strong acids have approximately the same acid strength in water solution since they
are highly ionized. Their ionization reaction with water is almost 100/% even in fairly con-
centrated solutions. Strong bases behave the same way. In aqueous solutions of weak
acids, the concentration of the hydronium ion is quite low even in dilute solutions. In aque-
ous solutions of weak bases, the hydroxide ion concentration is also very low. Since all of
the solutions to be used are the same concentration, the varying pH values (which are
H3O+) can be used to estimate the relative % ionization or the strength of the acids and
bases.
Materials:
Spot plate; distilled water; 0.1 M solutions of hydrochloric acid, sodium hydroxide, oxalic
acid, boric acid, ammonium hydroxide, acetic acid, sodium bicarbonate, nitric acid, sodium
hydrogen sulfate, sodium phosphate; saturated solutions of H2S and CO2; indicators:
bromthymol blue, methyl orange, phenolphthalein, alizarin yellow, bromcresol purple, cys-
tal violet.
Procedure:
Part 1: Add about 5-6 drops of one of the solutions to 6 spots on the spot plate. Add only 1
micro drop of each indicator using Beral pipette to the separate spots. Record the color
that each indicator produces on the correct line of the data table. Repeat this procedure
with each of the solutions. When cleaning the spot plate between uses, be sure to rinse it
thoroughly and use distilled water for the final rinse.
Make sure the spot plate is clean. Rinse with deionized water.
0.1 M Crystal Methyl Or- Bromcresol Bromthy- Phenopthal- Alzarin Yel- Approxi-
Solution Violet ange Purple mol Blue ein low mate
0.8—1.1 3.2—4.4 6.0—6.8 6.0—7.6 8.2—10 10.5—11.4 pH
HCl
NaOH
H 2C 2O 4
H3BO3
NH4OH
HC2H3O2
H2CO3
H 2S
NaHCO3
NaHSO4
HNO3
Distilled
H 2O
Na3PO4
Conclusion Questions:
Materials:
Cassette with set of chemicals “A”, “B”, “C”, “D” in plastic pipets and solid “E” , 24 well re-
action plate or a 96 well reaction plate
Procedure:
1. Record the number of your cassette in the proper place on your report page.
2. In your reaction plate, mix all possible combinations of chemicals “A”, “B”, “C”, “D”
and “E” using 6 drops of each solution if using a 24 well plate and a small piece of
solid. (If using a 96 well plate, use 3 drops of each solution and a small piece of solid.)
3. Make careful observations for all reactions and record the observations in ink in the
following data table.
4. When you have completed the experiment, dump the contents of your reaction plate in
the waste container specified by your teacher and clean your reaction plate. Rinse it
with distilled water. Return all chemicals to the cassette.
Solution A B C D
E
(1 )
(2 )
(3 )
3. What is a precipitate?
6. List procedures and techniques that a good laboratory chemist should follow.
7. If you had the opportunity to do this lab again, what would you do differently?
8. What are the 3 most important things you learned from this lab?
Materials:
The following should provide stock solutions for 5 classes. Use distilled H20 for all solu-
tions.
bromcresol green solution—- Add 0.05 gram of brorncresol green powder to 13 ml of 0.01
NaOH. Add drops of this solution to 125 ml water until the
color matches that of the CuSO4 solution.
0.1 M CuSO4 solution----- Add enough water to 3.1 g of CuSO4.5H20 to make 125 ml. of
solution.
0.1 M AgNO3 -------------------- Add enough water to 2.9 g AgNO3 to make 125 ml. of solution.
Be sure to check the HCI solution to see if the color change occurs with the copper sulfate
solution. If not add more acid to the stock solution.
Label the cassettes. It Is suggested that different types of cassettes be used for the odd
and even sets. Cut Beral pipettes to fit in cassette. Label odd numbered sets with one
color permanent marker and the even numbered sets with a different color permanent
marker and place tape over label to protect it. Fill pipettes and place In cassette. Labeled
small bottles are convenient to use to fill the pipettes with the solutions. Containers for the
zinc can be made from the cut off bulbs of 2 pipettes.
Suggestions:
1. Hand out odd and even numbered sets alternate lab stations.
2. Although the 2 sets are not identical, they will LOOK Identical. DO NOT call attention to
the differences between the two sets. Let the students assume they are all the same.
Hazards:
Wear goggles & aprons. Students should be warned to avoid getting the solutions on their
hands or clothing. Skin irritation and/or stains could result.
References:
Marian Hart, How Do You Know A Chemical Reaction Is Happening’, Microscale Chemis-
try, The Woodrow Wilson National Fellowship Foundation Chemistry Institute 1987 Cur-
riculum Module.
‘Blazing Test Tube Lab Manual’, Jean Dean, Bartlesville High School
Results:
Solution A B C D
E Bubbles on Black, brown No change No change
metal coating
B Clear, green
solution
Solution A B C D
E Bubbles on No change No change Black
metal
C No change No change
B Clear, yellow
solution
Recycling has become an important part of our lives. We have recycled paper and glass.
Now more and more we can recycle plastic. There are many types of plastic. The plastics
industry has voluntarily coded plastic so that it can be recycled. The ways that plastic has
been coded is listed below. This lab will point out the differences in some of the most ~
types of plastics, why they can be separated, and why not all plastics can be recycled in
the same manner.
Materials:
6 density solutions
Tongs
Tweezers
Bunsen burner
Acetone
Copper wire
Striker
Boiling water
Hole punch
Tap water
Six samples of different polymers
Distilled water
Paper towels
Procedure:
Part 1: Physical Characteristics
Part 2: Density
When changing from one density solution to another, rinse with distilled water. Then pat
dry with paper towel.
1. Drop the sample into water. Be sure air bubbles are not trapped underneath.
• If it floats in water, check the density in the alcohol solution of density 0.940 g/
cm3
3
• If it floats in this solution, place it in alcohol solution with density 0.925 g/cm
2. If it sinks in water, check its density in saturated salt water solution of density 1.20 g/
cm3
3
• If it sinks in this solution, place it in corn syrup of density 1.40 g/cm to identify
Part 3: Copper Wire Flame Test - Do Under the Hood over Aluminum Foil
1. Using the tongs, hold a piece of copper wire in the flame of a Bunsen burner until red
hot. Remove from the flame and carefully push the hot wire through the sample.
2. Place the wire back in the flame. Observe the color of the flame that comes from the
wire. Note: the halogens (fluorine, chlorine, bromine and iodine) will react with copper
to create copper (II) ions which will give off a green flame. The absence of copper (II)
ions will result in a yellow flame. Use the polymer names to explain the color of the
flame and narrow your polymer choice.
PET (1) will show some reaction. The others will not.
1. Place the sample in acetone for about 5 seconds. Remove and press between fingers.
2. The polymer chains from styrene will “1oosen up” in acetone. The surface will become
soft. The other chains will not.
Teachers' Information:
Density Proportions
Solutions
g/cm3
0.87 4 parts ethyl alcohol to 1 part water
0.925 10 part ethyl alcohol to 7 parts water
0.94 1 part ethyl alcohol to 1 part water or
3 part isopropyl alcohol to 1 part water
1.00 distilled water
1.07 10% NaCl - water
1.20 saturated NaCl solution
1.40 White Karo Syrup
Type:
Type Density
poly-4 methyl-1 pentene 0.83
polypropylene 0.90 – 0.91
low density polyethylene 0.92 – 0/94
high density polyethylene 0.95 – 0/97
polystyrene 1.04 – 1.07
polyvinyl chloride 1.30 – 1.34
polyethylene terephthalate 1.38 – 1.39
polytetrafluoroethylene 2.2
PP is insoluble in acetone and is stronger than high or low density polyethylene. It is used
is aerosol caps. PET is transparent and tough making is good for beverage containers.
Questions:
1. Your boat is sinking and you are not a good swimmer. You notice 6 solid plastic blocks
labeled 1-6. Having only two arms, which ones should you grab and why?
____________________________________________________________________
____________________________________________________________________
2. You wish to make a handle for a cooking pan out of plastic. Which type would you use
and why?
____________________________________________________________________
____________________________________________________________________
3. If a person wishes to transfer fingernail polish to a plastic container, which type should
they avoid and why?
____________________________________________________________________
____________________________________________________________________
4. Why wouldn't polystyrene be good for 2 liter soda bottles?
____________________________________________________________________
____________________________________________________________________
5. If plastics were all mixed together, what would be a good way to separate them?
____________________________________________________________________
____________________________________________________________________
Reference:
Adapted from two labs published in Chem 13 News In 1994. These labs contained Infor-
mation from an NSTA publication: Polymer Chemistry.
To measure the pH of local rainwater over a period of time and present results.
Background:
It is important to keep track of the pH of local rain because of the environmental problems
caused by acid deposition. Although it might seem a simple task, the accurate measure-
ment of the pH of rain is not easy. Water dissolves carbon dioxide from the air and addi-
tion or the loss of this gas can produce sizable changes in the pH of the sample. For best
results, the rainwater should be tested soon after its collection. Acid indicators will work for
this application since they can be transported to field sites or used at home.
Description:
They will design a collector for acid rain and collect rain and test with pH meter or com-
parison to indicators for a minimum of 5 times. The results will be displayed in the form of
a graph. At the end of the project the collector or a picture of the collector must be turned
in along with a description of where the collector was located and why. All member. of the
same group will receive the same grade. All of the report will be displayed on a large
poster board.
Tips:
1. A zip-lock bag should be a part of the collector design. The rain samples should be
collected soon after the rainfall. Squeeze excess air out of bag and seal. Refrigerate.
Bring to school the next day to test before school.
2. Do not collect acid rain when there is a threat of lightning.
(This project counts as two lab grades. All persons in the same group get the same
grade.)
Name _________________________________________________________________
Name __________________________________________________________________
Name _________________________________________________________________
This report should be presented on a large poster board with this page attached. It will be
graded as follows:
1. A photograph or photographs of your rain collector and the surroundings and reason
for location. (20pt.)
2. Data Table of at least five samples.(20pt.)
3. Graphing of Data (10pt)
4. Computer Graphing of Data ( 10 pt.)
5. Explanation of how acid rain is formed. Include three different acid rain causing com-
pounds. You must show equations. (15 pt.)
6. Explanation of destruction caused by acid rain. (15 pt.)
7. Appearance of Report. Is it easy to understand and neat? (10 pt.)
Bonus 5 points
Half-Life Simulation
Background:
The rate of decay of radioisotopes is measured in half-lives. One half-life is the time it
takes for one half-life of atoms in a sample of radioactive material to decay. In this experi-
ment you will use pennies to simulate the relationship between the passage of time and
the number of radioactive nuclei that will decay. As with real nuclei the passage of times
will be measured
in half-lives.
Suppose that the Lincoln side of the penny represents a radioactive isotope of the element
pennium called Lincolnium. The product of this isotope's decay is the back side called
backonium.
You will place 160 pennies in a pizza box with the Lincoln side up. This means that it all
starts out radioactive. Every time you shake the box side to side a half-life has passed. All
of the pennies that are not Lincoln side up will be removed. They have decayed. The box
will be shaken again simulating another half-life.
After you have completed six half-lives of decay, you will share your data with the class.
The data will be graphed. The curve that you construct applies to the decay of every radio-
active isotope. The only difference is that the half-life is a different time period for each
isotope. A half-life can be a very long period measured in years or a very short period
measured in minutes. Your curve will also show the rate of decay expressed n6' only in
numbers of nuclei, but in masses.
Objective:
Materials:
Procedure:
1. Place the 160 pennies in pizza box with Lincoln sides up.
2. Start out with zero decayed and 160 radioactive when you record.
3. Close the container and shake gently from side to side.
4. Open the container and remove the pennies which do not have the Lincoln side up.
5. Record the number of decayed as back side up and the radioactive as Lincoln side up.
6. Repeat steps 3-5 five more times. At this point you will have 6 half-lives.
7. You should have seven numbers in your final column, representing atoms remaining
8. after zero, one, two, three, four, five and six half-lives.
9. Pool your data by finding total number of atoms decayed for total class after each half-
life.
10. Each group is to record data on overhead.
Half-Life Simulation
11. Prepare a graph by plotting the number of half-lives on the X-axis and the number of
un-decayed atoms remaining for each half life on the Y-axis.
Half-Life Simulation
Data Table 1:
Data Table 2:
Half Lives
Lab Pair 1 2 3 4 5 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Total
Colligative Properties
Purpose:
To study on of the colligative properties, ie, freezing point, of a salt water solution
Materials:
rock salt (NaCl), crushed ice, custard (6 cup milk, 1 cup sugar, 1 tablespoon vanilla), plas-
tic bucket, small plastic cup, plastic spoon, thermometer, balance
Introduction:
Colligative properties are those properties of solutions which are determined by the num-
ber of particles in solution. Freezing point and boiling point are examples of colligative
properties.
The addition of a nonvolatile solute affects the freezing point and boiling point of a solution
by lowering the vapor pressure of the solvent. Vapor pressure depends on the number of
surface particles which attain enough kinetic energy to escape the liquid state. Since the
presence of solute particles decreases the number of solvent particles on the surface,
fewer particles attain the energy to escape, and thus the vapor pressure is lowered. The
boiling point and the freezing point are both functions of the vapor pressure and conse-
quently are affected by this change in vapor pressure. For water, it has been found experi-
mentally that one mole of nonvolatile solute particles will raise the boiling point of 1000 9
by 0.512 degrees Celsius and lower the freezing point by 1.86 degrees Celsius. One mole
of solute dissolved in 1000 g of solvent is called a one molal solution.
Since ionic solutes dissociate in solution, a one molal solution of these solutes provides
two or three times the number particles per mole and this the boiling point elevation and
the freezing point depression is doubled or tripled accordingly. This is true only of dilute
solutions due to the re-association of particles when their concentration increases.
In this experiment we will investigate the affect of rock salt (NaCl) on the freezing point of
water. Since our solution will not be dilute, the experimental freezing point will deviate con-
siderably from the theoretical freezing point.
Explanation:
Adding salt to water lowers the temperature at which it will freeze. A saturated salt water
solution will freeze at about -20 degrees Celsius. The salt interferes with the crystalline
structure of ice. When .you put ice cream batter in the cup or in a freezer in contact with
the ice-salt solution, heat flows from the warm batter to the solution. The heat will go to
melt the ice before it raises the temperature of the ice-salt solution. If enough heat is lost
by the batter, it will freeze at about 0 degrees Celsius.
Colligative Properties
Procedure:
Reference:
Colligative Properties
Data Table:
Micro-Titration Apparatus
Clue One – There are many ways to begin the arrangement. You could try grouping the
“people” using ways in which they are alike. Or, you might find this gets you where you
want to go the fastest. Or, you might begin sequencing the pictures. Here’s an example.
If you were given 100 slips of paper with the numbers 0 to 99 written on them, you could
put them in a long row by sequencing them. That is, each number would be one more
than the last. Once you had them in a long row, you could then break the sequence to
create columns without changing the original order. Your new arrangement would look
like this.
Notice that each row has something in common. The first row has all the single digit num-
bers. The other rows all begin with the same number. Also, notice that each column has
something in common. They all end in the same number. If one of the numbers is miss-
ing, you can easily figure out which one it is by looking at the row and column it is in. The
missing number must begin with a 3 and end with a 5.
This is the idea of what you must do with the “secret agents”. But how cah you sequence
things that are not numbers? Notice that you can identify certain properties or characteris-
tics on each picture. They have hair, button or body designs, fingers, arms, facial expres-
sion and bodies. The second clue is that each
“secret” agent is different from every other one in two of those properties. In other words,
no tow pictures have exactly the same of these properties. If you find either one of those
two, you can sequence the pictures because the properties change in some regular way.
When you are finished you should have three rows. The rows do not necessarily have the
same number of pieces as they do in the example above. Remember, the goal is that all
members of a row have something in common and all members of a column have some-
thing in common. That will let you identify the “missing agent”.
When you have finished the final arrangement, answer the following questions on another
sheet of paper. Put your set number on your paper.
(If you do not accomplish this task in 30 minutes, this envelope will self-destruct, taking
you with it. (Well, maybe not.) Good luck. If you get stuck, the Agency will disavow any
knowledge of your actions. However, you may be able a little (very little) from you
teacher. Go for it.
TEACHER:
Cut apart one page of the figures. Put into envelopes or zip-lock bag. Number envelopes
or bags. Remove one figure from each set. Keep track of which one you remove from
each set.
Credit:
I do not remember where I got this. I think it is from the Frontiers in Science Program from
a lady who taught at a private school in Dallas.
Goggle Songs
48
49
50
1 96-well spotplate
Water bottle with distilled water
Become a smart shopper. Learn which stores in your area have the best prices.
Find out which stores in your area accept purchase orders. Ask to be able to use these
for science purchases. If you find a good price on a needed item, check with the store
management to see if they will accept P.O.‘s. Also, check to see if you can get reim-
bursed for cash purchases of items at super discount stores such as Sam’s Clubs or Dol-
lar Stores.
Substitute free and recycled materials as well as consumer chemicals for traditional lab
materials. Students appreciate the use of recycled materials.
Use muriatic acid (approximately 8 M hydrochloric acid) instead of reagent grade hydro-
chloric acid in all labs except for high level quantitative work and procedures which need
12 M HCl. Muriatic acid can be purchased at grocery stores, discount stores or pool sup-
ply stores.
Use baby food jars to dispense and store non corrosive dry chemicals for labs. These can
also be used in place of 60 ml beakers when Pyrex is not needed for heating purposes.
Use 10-12 oz throw away glass soft drink bottles (when you can find them) instead of re-
agent bottles.
Use soup cans for hot water baths and cut off 2 liter soft drink bottles for ice baths.
Be very careful about using 2 or 3 liter soft bottles or water bottles or milk bottles for stor-
ing chemicals. These types of plastic are not resistant to most chemicals. If you decide to
use them be sure that you have taken the food label completely off the bottle and have
labeled the bottle with a proper chemical label. Solutions of bases or salt solutions such
as copper sulfate or sodium carbonate will develop leaks over a period of time in these
bottles. One gallon heavy plastic vinegar bottles do work for storage.
Recycle empty bottles you purchase chemicals in such as acid bottles, alcohol bottles,
etc. Be sure to completely remove the original label and properly label the solution you
are storing in the bottle.
If you do not have how water piped into your lab, buy a 30 cup coffee pot with a spigot to
use as a source of hot water.
Make coffee can or peanut butter jar desiccators by putting the desiccant in the bottom
with a square of metal screen to top to set the test tubes or crucibles on.
Substitute paint thinner for solvents such as trichloro-trifluoroethane. This works well to
Use strawberry baskets, margarine tubs etc to help organize and store lab materials.
Plastic dish pans (such as Rubbermaid) make ideal lab trays and are much cheaper than
the traditional lab trays.
Substitute 5 gallon water coolers with spigots for carboys to dispense distilled water.
One ounce and two ounce condiment cups from Sam’s are good weighing cups and also
measuring devices for approximate amounts of liquid.
Plastic stirrers from airlines or fast food restaurants make ideal micro spatulas..
Plastic tennis cylinders can substitute for graduate cylinders in many demonstrations ex.
Density cylinders.
Two electronic balance (.01 g approximately $300 to $400 or ,001 g approximately $800)
serve a class of 24 better than 12 centigram balances (approximately $ 200 each).
Page protectors or acetate transparency sheets can substitute for micro well plates for
many reactions.
Lengths of clear plastic tubing attached to a wood block with a rubber band can be used
as a U-tube.
The top third of a 2 liter soft drink bottle can be used as a large funnel.
Hand held vacuum pumps and or aspirators on faucets can substitute for vacuum pumps
in many experiments.
Use large glass fruit juice bottles with sand in the bottom to demonstrate the burning of
steel wool in oxygen.
If your shop teacher has an oxygen or hydrogen cylinder with gauges you may be able so
share the use and cost of having them filled. This is much cheaper than buying lecture
bottles of gases.
Use drug store peroxides (from a discount store) for 3 % hydrogen peroxide. Clairoxide
from the hair coloring section of the discount store is 6 % hydrogen peroxide as is “20 vol-
ume” peroxide from a beauty supply store. “40 volume” peroxide is approximately 12 %
peroxide.
Use large syringes for reduced pressure reaction. Your veterinarian might donate some
of these especially if you have a dog and give him a lot of business.
Buy dry cells at Sam’s or other discount stores or join the radio Shack battery club.
Used disposable communion cups can be collected and used as micro beakers.
Paper cups, plastic bags, toothpicks, batteries, detergent, sponges, etc are usually much
cheaper at the discount store or dollar store than the grocery store.
Description:
Demonstration:
PV=nRT
Pressure = Barometer
C=2πd
Volume= 4/3πr3
Materials:
Equipment:
15-inch round balloons *
#5 solid rubber stoppers
small beaker (100-mL or I50-mL)
platform or top-loading centigram
thermometer
barometer or source of barometric pressure*
hammer
Towel
See Modifications/Substitutions
Hazards:
Dry ice should not be touched with the bare hands; tissue damage can result. The recom-
mended I5-inch balloons can hold up to about 1 mole of carbon dioxide gas; if a different
size balloon is used, its capacity should be checked.
1. Dry ice is available from ice companies or from an ice cream distributor or store.
2. Round balloons are available from a drugstore or party store.
3. The barometric pressure can be obtained by calling the number listed for weather in
most telephone directories.
Procedure:
1. Mass a balloon and rubber stopper to the nearest hundredth of a gram and record.
2. While one student holds the mouth of the balloon open, another student should add
approximately 5-8 g of small pieces of dry ice to the balloon from a beaker and insert
the stopper.
3. Quickly mass the balloon, stopper and dry ice as soon after assembling the system as
possible.
4. Agitate the balloon and contents gently to vaporize the carbon dioxide. Dry the exterior
of the balloon. Mass the balloon, stopper and gaseous carbon dioxide after the con-
tents have reached room temperature.
5. Record the temperature of the room and the atmospheric pressure.
6. Calculate the mass of dry ice used.
7. Calculate the moles of carbon dioxide used.
8. Determine the mass of air displaced by the inflated balloon.
(Mass of balloon, stopper, and C02 (s) - Mass of balloon, stopper, and CO2 (g)) / (Mass of
displaced air)
9. Determine the volume of air displaced, using the density • of air at the temperature
and pressure in the room.
9. Volume of air displaced = (mass of air displaced / Density of air at room conditions)
10. Determine the volume of the carbon dioxide (volume of stopper is small enough com-
pared to the volume of the gas, that it can be ignored).
11. Calculate the volume of carbon dioxide gas per mole of dry ice used.
11. Molar volume of CO2 (g) = (Volume of CO2/Mass of CO2) x (44 g CO2/Mole of CO2)
12. If it is assumed that the pressure of C02(g) in the balloon equals the atmospheric
pressure, the molar volume of CO2 can then be corrected to STP.
Carbon dioxide gas presents no disposal problems; it can be expelled from the balloons
into the room.
Discussion:
When the apparent mass of the balloon, stopper and carbon dioxide gas is determined, it
is much less than the mass of the system determined when the carbon dioxide was a
solid. Because the volume of the balloon and gaseous contents is large compared to its
mass, the mass of the displaced air, pushing against the balloon and buoying it up, is a
significant fraction of the mass of the balloon and contents. The difference between the
true mass of the balloon and contents and the apparent mass (when the carbon dioxide is
a gas) is equal to the mass of the displaced air (the buoyancy correction). Using the mass
of the displaced air and the density of air at room conditions (obtained from a handbook),
students can calculate the volume of displaced air. The volume of displaced air is, to a
good approximation, the volume of the carbon dioxide gas.
Tips:
1. As part of the pre-activity discussion, show students the approximate volume of one
mole of gas by placing 44 g of dry ice in a IS-inch balloon and setting the balloon
aside at the beginning of the period. By the end of class, the dry ice will have vapor-
ized.
2. Students will need an understanding of buoyancy to understand this activity. It is sug-
gested that teachers demonstrate buoyancy in water and discuss buoyancy in air as
part of the pre-activity discussion. These ideas might be reinforced again while stu-
dents are waiting for the dry ice to vaporize.
3. It is important that the massing of the balloon, stopper and dry ice be done as quickly
as possible to minimize the buoyancy factor at this point. While waiting for the dry ice
to vaporize,' students should be careful not to rub the balloon excessively; if the bal-
loon picks up a static charge, it may interfere with the determination of the mass.
4. If 5-8 g of dry ice are vaporized in a I5-inch balloon attached to a manometer, the
pressure exerted by the balloon fabric is 12-14 mm Hg. Since this pressure represents
only about 1.5% of the total pressure, it is possible to approximate the pressure of the
carbon dioxide with the atmospheric pressure without introducing substantial error.
5. If 5-8 g of carbon dioxide is placed in a 15-inch balloon, the measured molar volume is
within 5% of the accepted value. Determining the volume of the balloon by measuring
the circumference is not practical. Even if two or three circumference measurements
are averaged, there is a 15-20% error in the molar volume because any error in the
circumference is compounded when the radius is cubed to calculate the volume of the
balloon.
Reference:
"Handbook of Chemistry and Physics," The Chemical Rubber Publishing Co., Cleveland,
OH. Use this reference to find the density of air at the temperature and pressure in the
laboratory. Look up Density of Air in the index.
Submitted by Eva Lou Apel, Michael Bannon, Joseph Baron, John Brodemus, and Elna
Clevenger, Consumer Chemicals, The Woodrow Wilson National Fellowship Foundation,
Chemistry Institute, 1986 Curriculum Module
Na+ H+
Na+ H+ H2O
H+
Na+ OH-
+
[H+] = [OH-]
Na
OH- Cl- OH-
Cl- Cl-
H2O H2O
C2H3O2-
C2H3O2-
H+
H+ H+
OH-
OH- OH-
NH4+ NH4+
NH4+
Cl-
NH4+
H+
Cl-
NH4+
H+ H+ Cl-
H+
H2O OH-
H2O
Rainbow Cylinder
Description:
Materials:
(To make Yamada’s Universal Indicator Dissolve 0.0025 g of thymol blue powder, 0.6 g of
methyl red powder, 0.030 g of bromthymol blue powder and 0.05 g of phenolphthalein
powder in 50 ml of 95 % ethanol. Add 0.1 N NaOH until the mixture is green and dilute
the resulting solution to 100 ml with distilled water,)
Procedure:
Solution # 3: Add enough Yamada’s indicator to 300 ml of 0.2 M acetic acid to produce a
red-orange solution. Dissolve approximately 4 grams of ammonium acetate
to this solution.
Solution # 4: Add enough Yamaha’s indicator to the HCl to produce a bright red solution.
Add enough solid NaCl to make a near saturated solution.
Rainbow Cylinder
Assembling the Rainbow Cylinder:
Pour Solution # 1 into the graduate cylinder. Carefully insert the funnel with rubber tubing
into the cylinder so that the bottom of the tubing is at the bottom of the cylinder. Slowly
pour Solution # 2 through the funnel into the cylinder. Next slowly pour Solution # 3
through the funnel. Finally, pour Solution # 4 through the funnel. Carefully remove the
tubing. If necessary carefully add a few drops of 6M NaOH to the very top of the cylinder
with a Beral pipette to make the top a violet color. Using a long stirring rod, slightly stir
the contents of the cylinder to achieve a “ROYGBIV” cylinder. Cover the top of the cylin-
der with plastic film and set it where it will not be disturbed.
Suggestions:
With a little practice and slight adjustment of the amounts of NaOH and HCl solutions, a
beautiful rainbow results. Remember to add indicator and salt to the solutions in the lower
part of the cylinder to increase the density of Solution # 4. Avoid over mixing the solutions
at the beginning so that the cylinder will last longer. If possible, set the cylinder where
light from a window shines through it.
Hazards:
Acetic acid, hydrochloric acid, sodium hydroxide and ammonium hydroxide are all corro-
sive the pH at the top will be >10 and at the bottom will be <4.
Disposal:
The final solution is approximately pH 7 and can be flushed down the drain with water.
Discussion:
This demonstration is truly one that lasts and last. I usually make it early in the year for
open house. The colors gradually change to give more of one color and a more complete
rainbow. It usually takes approximately two months for the cylinder to become all one
color. I do not explain what it is to the students when if first appears. By the time we dis-
cuss density, the students usually realize the solutions are of different densities. I also
use this as a reference during the study of acids, bases and buffers. The differences in
density cause the diffusion to be slow but the changes are also slowed by the buffering
produced by the acetic acid-ammonium acetate and by the ammonium hydroxide-
ammonium acetate interfaces. The ammonium acetate solution will have a pH of 7
(green) because the acetic acid Ka equals the Kb of ammonium hydroxide. When study-
ing weak acids, weak bases and buffers, a good question for an AP class would be to ex-
plain why the final color is green.
Reference:
Adapted from a demonstration presented by Roy D. Caton at the Woodrow Wilson Chem-
Rainbow Cylinder
istry Institute, Princeton University, 1986.
Gunther, W.B. “Density Gradient Columns for Chemical Displays”, Journal of Chemical
Education, Easton PA, 1986 Vol. 62, p148. This reference describes several long-lasting
colorful displays.
The purpose of this demonstration is to quickly show that the molecular weight of a gas
can be determined by using the ideal gas law. The source of the gas is dry ice. The dem-
onstration can be started at the beginning of the lesson and completed at the end of the
lesson. The time for the demonstration takes less than 15 minutes.
Materials:
16 inch round balloons – yellow works best Top – loading centigram balance
# 5 solid rubber stopper Barometer or source of baro
metric pressure
dry ice thermometer
hammer Large powder funnel
gloves Long piece of string
towel Meter stick
paper cup Overhead transparencies and over
head projector
Procedure:
2. Crush a small piece of dry ice into small pieces using hammer and gloves.
3. Tare a bathroom paper cup on the balance. Add small pieces of dry ice until you get a
mass of 8 to 10 grams to approximate the mass of CO2 .
4. Place a large powder funnel into the opening of the balloon and push pieces of dry ice
into the balloon through the funnel and quickly stopper the balloon.
5. Immediately mass the balloon containing the dry ice with the stopper in place. Record
the mass.
6. Proceed with the lesson until all of dry ice has sublimed. Yellow balloons are easy to
see through. You may agitate or put in pan of warm water to speed up sublimation.
7. Have a student help you place a string around the balloon to measure the circumfer-
ence. Place the string on the meter stick to get the measurement. Measure both di-
rections and average circumference to eliminate error.
8. Record the barometric pressure and the room temperature or the temperature of the
water bath.
9. Calculate the Molecular Weight of CO2 using the ideal gas formula. See transparency
Suggestions:
Blow up the balloon and let the air out before class to stretch the rubber. Lower percent
errors have been found then the sample size is between 8 and 10 grams. A 15 or 16 inch
balloon should be used.
Hazards: Dry ice should not be touched with bare hands. Tissue damage can result.
Disposal: Allow excess dry ice to sublime in a hood or well ventilated area.
Discussion:
It is assumed that the pressure of CO2 gas in the balloon equals the atmospheric pres-
sure. It is best to use a balloon that has been completely blown up and stretched. If 5-8
grams of dry ice are vaporized in a 15 inch balloon and attached to a manometer, the
pressure exerted by the balloon fabric is 12-13 mm Hg. Since the pressure represents
about 1.5 % of the total pressure, it is possible to equate the atmospheric pressure with
the pressure of CO2. It is important to weigh the balloon, stopper and dry ice as quickly as
possible before a significant amount of the dry ice has sublimes. This is a simplified ver-
sion of a lab described in the reference.
Reference:
Eva Lou Apel, Michael Bannon, Joseph Baron, John Brodemus and Elna Clevenger.
“Determination of the Molar Volume of Carbon Dioxide,” CONSUMER CHEMICALS, the
Woodrow Wilson National Fellowship Foundation Chemistry Institute 1986 Curriculum
Module.
R=0.0821l L-atm/mole-°K
MW=
% error =
Can Shaker
Context: Carbonated drinks are under pressure. They have a gas, carbon dioxide, dis-
solved in them. Releasing the pressure, agitation and heating make the gas come out of
solution. Opening the can releases the pressure.
Procedure:
Questions:
Explanation:
The carbon dioxide comes out of solution when the can is shook. By tapping on the can
with the ruler you bring the bubbles to the top of the can. When the can is opened, the
gas is released first. Usually when a can is shaken the gas in the bubbles is throughout
the can. When the can is opened and the pressure is released the
Gas is the bubbles rushes out and takes the soda with it.
Shaving in a Vacuum
Context: Boyles Law
Materials: Vacuum pump and bell jar, shaving cream, blown-up balloon, Peeps candy
Procedure:
Questions:
Explanation:
The shaving cream, balloon and Peeps Candy contain air – a gas.
1. THINK SAFETY. Is the room ventilated? What hazards are involved? Does the audi-
ence need to wear safety goggles? Is it a demo that should be done outside with stu-
dents at a safe distance away? Are proper disposal methods available? Is a safety
shield available? Is the teaching value or show value worth the risk involved? Some
demos in reliable books such as Shakhashiri and Sumerlin and even in text books are
too hazardous to do in a large group setting in our opinion.
2. Is the demo relatively easy to do? How many solutions and what quantities are in-
volved? Is it important that solutions be measured with extreme accuracy? Must solu-
tions be made at the last minute? Are the solutions shelf stable? Can the demonstra-
tion be done in disposable plastic or does it require a lot of cleanup and a lot of glass-
ware?
4. Can it be adapted to the theme of the show? Many demos lend themselves to differ-
ent themes for different seasons of the year.
5. Does the demo have eye appeal? Is it one that is particularly “exocharmic”?
6. Does the demo use methanol or ethanol? If so, the large bottle of alcohol must not be
nearby or accessible to students. A student deciding to add more alcohol is one of the
greater dangers for burns.
1. Pick a theme for the show and develop a script which ties the demos together and to
the theme.
2. Pack a box for each demo which contains everything needed for that demo. If possi-
ble, measure solutions ahead of time and place them in small bottles ready to use.
The box should have a checklist of things needed and instructions for performing the
demo. Number the boxes in the order they will occur in the show.
3. The demo should be done in a large enough scale to be visible in the room. An ele-
vated box sometimes makes the demo more visible. Light boxes can easily be con-
structed to aid in visibility. A white background or a dark background sometimes aid
visibility.
4. Keep the demo table uncluttered. Do not set the box on the table. Only the necessary
materials should be on the table. Remove all glassware, etc for each demo as it is
finished before starting the next demo.
6. Begin and end the show with a demo which is spectacular orattention getting. Mix
slower reactions with high interest reaction.
7. Be sure that you and your students model safety by wearing goggles, scissors, etc.
8. Take along containers for liquid and solid waste, paper towels, extension cords, extra
distilled water, tape, magic markers, scissors, etc.
Example 1:
Solid sodium + liquid water yields sodium hydroxide (aq.) plus hydrogen gas.
Example 2:
Iron (III) oxide reacts with carbon monoxide to give iron and carbon dioxide
Example 3:
Example 4:
Example 6:
Example 7:
Aqueous beryllium iodide plus aqueous tin (II) nitrate yields aqueous beryllium nitrate and
solid tin (II).
Example 8:
Aqueous ammonium sulfate plus aqueous lead (II) chlorate yield aqueous ammonium
chlorate and solid lead (II) sulfate.
• Find a relationship between the two units, using a reference table. For example, if
asked to convert between pressures in atmospheres and millimeters of mercury, you
first locate in a reference table the relation: 1 atm = 760 mm Hg.
• Translate this relationship into a conversion factor. The relationship 1 atm: 760 mm Hg
gives you two conversion factors: 1 atm/760 mm Hg and 760 mm Hg /1 atm.
• Multiply the original quantity by a conversion factor that cancels the unit you want to
get rid of. If asked to convert a pressure in atmospheres, for example 3.5 atm, to milli-
meters of mercury, you multiply by 760 mm Hg/1 atm so as to cancel the unit "atm."
• If necessary, repeat this process, using successive conversion factors, until you obtain
the quantity in the desired units.
•
Reference Table for Problems:
1 hogshead = 7 firkins 1 mole = 6.02 x 1023 molecules 8 lardos = 7 fleas
70 miles/hr = ? ft/sec
Show all work in dimensional analysis for the following problems. Do work on your own
paper. Draw a box around your answer.
1. 752 torr = ? atm
2. 752 atm = ? torr
3. 251 calories = ? J
4. 345 J = ? BTU
5. 27 pecks = ? bushels
6. 345 J = ? erg
7. 25 grunts = ? groans
8. 221 yd = ? furlongs
9. 42.0 potties = ? puncheons
10. 8.00 tun = ? potties
11. 144 hogshead = ? firkins
12. 455 tuns = ? puncheon
13. 6.51 lb = ? drams
14. 785 drams = ? pennyweight
15. 21 nookes = ? hides
16. 545 fardells = ? yards
Show all work in dimensional analysis for the following problems. Do work on your own
paper. Draw a box around your answer.
Show all work in dimensional analysis for the following problems. Do work on your own
paper. Draw a box around your answer.
1. 35 vum = ? fot
2. 55 bef = ? fot
3. 333 cm = ? mile
4. 345 liter = ? bushel
5. 32 tolls = ? sacks
6. 0.25 lardos = ? sacks
7. 49 fleas = ? tolls
8. 12 bips = ? fleas
9. pains = ? groans
10. 25 sop = ? bef
11. 88.0 km/hr = ? ft/sec
12. 186,000 miles/sec = ? miles/year
13. 2 moles = ? molecules
14. 5.4 x 109 molecules = ? moles
15. 240 BTU = ? erg
16. 15 km/liter = ? miles/ gallon
ns
1 1 2
1s1 1s2
2 3 4 (n-1)d 5 6 7 8 9 10
2s1 2s2 2p1 2p2 2p3 2p4 2p5 2p6
3 11 12 13 14 15 16 17 18
3s1 3s2 3p1 3p2 3p3 3p4 3p5 3p6
4 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
4s1 4s2 3d1 3d2 3d3 3d4 3d5 3d6 3d7 3d8 3d9 3d10 4p1 4p2 4p3 4p4 4p5 4p6
5 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
5s1 5s2 4d1 4d2 4d3 4d4 4d5 4d6 4d7 4d8 4d9 4d10 5p1 5p2 5p3 5p4 5p5 5p6
6 55 56 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
6s1 6s2 5d1 5d2 5d3 5d4 5d5 5d6 5d7 5d8 5d9 5d10 6p1 6p2 6p3 6p4 6p5 6p6
H-8
7 87 88 103 104 105 106 107 108 109 110 111 112
7s1 7s2 6d1 6d2 6d3 6d4 6d5 6d6 6d7 6d8 6d9 6d10
(n-2)f