You are on page 1of 1

Telescoping AC Voltage Detector

Non-contact detection of AC Voltage up to 1000VAC


With telescoping probe giving a total reach of 39” (1m) for hard-to-reach areas

Features:
• Non-Contact Detection of AC Voltage
from 5VAC to 1000VAC (50/60Hz)
• Telescoping probe extends to a
reach distance of 39" (1m)
• Red and Green LED indicators and switch-
controlled On/Off Audible beeper
• Sensitivity adjustment increases or reduces
sensor trigger threshold
• Locate difficult to reach live wires and
potentially dangerous manhole covers
and breaks in overhead lighting
• Dimensions: 7.7x2.4x1.2" (195x62x30mm)
Weight: 5.2oz (148g)
• Complete with two LR44 button batteries

Applications:
Detecting live AC Voltage on manholes
with convenient telescoping probe.
When Voltage is detected, audible
beeper will sound and the red LED will
flash on the probe tip.

✓ ✗ ✓ ✗
Telescoping feature provides the Probe extends to 0.9m with reach
convenience of easy reach by distance of 1m allows you to take
eliminating the hassles of bending measurements in hard to access areas
down without the use of a ladder.
Storage Position Sensor Tip Probe extends 36" (0.9m)
allowing 39" (1m) total reach

Ordering Information:
61326 61326
DV50 ............Telescoping AC Voltage Detector

www.extech.com Specifications subject to change without notice. 6/23/09 - R1


Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.

You might also like