You are on page 1of 2

WALLMOUNT TM 400 LUMINAIRE

APPLICATIONS
•  Building perimeter security, high-activity entrances, loading docks and small
work  areas adjacent to buildings
•  Wall mounted luminaire applications where high light levels and low costs are  required

SPECIFICATION FEATURES
•       /    1598 Listed to-dawn  operation. Field installed (Non-UL
•  Suitable for Wet Locations Listed) PE  kit is optional
•  Die-cast aluminum housing means •  Enclosed and gasketed borosilicate glass 
rugged,  long-lasting construction refractor provides long-lasting,  
•  Dark Bronze polyester powder paint finish non-yellowing  optics with high thermal and
is  standard. Provides corrosion resistant impact  resistance.
finish •  Mogul base porcelain lamp socket –
•  Easily removable, side-hinged, gasketed door E39  standard
•  Complete front access to lamp and ballast •  Improved packaging design keeps glass 
for  easy maintenance and relamping refractor and die-cast housing separate
•  Multiple threaded conduit entrances to  significantly reduce chances of glass
•  Factory-installed UL Listed internal fracture  during shipment
button  photoelectric control provides dusk-
The Energy Independence and Security Act of 2007 (EISA) affects Metal Halide (MH) and Pulse Metal Halide
(PMH) wattages from 175W to 450W and for domestic usage, the new digit is “E = EISA-compliant PMH” which
has a minimum efficiency of 88%. In many cases, the lumen value and lamp life of a lesser wattage meets or
exceeds the former MH ballast/lamp system. For 175W applications, where 175W E-PMH is not available, 150W
PMH may be an acceptable substitute. 150W PMH is medium base socket unless otherwise listed or requested.
ORDERING NUMBER LOGIC
WMTS 40
40 SS 00 DB PE
PRODUCT WATTAGE LIGHT VOLTAGE COLOR* OPTIONS*
IDENT SOURCE
XX XX X X XX XXX
WMTS = 17 = 175 E = Energy Act Compliant Pulse 60 Hz DB = Dark Bronze PE =  Factory-installed
Wallmount 400 Lumi- 25 = 250 MH (EPMH) 0 = 120/208/ (standard) button ­photoelectric
naire 40 = 400 S = HPS 240/277/ control. Discrete
Multivolt *NOTE: Factory voltage required —
Standard: Lamp not included 1 = 120 installed PE require specify 120, 208, 240,
2 = 208 longer lead times. 277 or 347 volt.
3 = 240 Contact factory.
4 = 277 *NOTE: Not available in
5 = 480 120x347 or 480 volt.
D = 347
F = 120x347

BALLAST AND PHOTOMETRIC SELECTION TABLE


All light sources are clear unless otherwise indicated.
Light Ballast Type/Voltage (60Hz) Photometric Curve
Wattage Source Multivolt 480 120X347 Number 35-45 - - - -
250 HPS A A A 1134 
400 HPS A A A 1133
175 EPMH A A A 1137
250 EPMH A A A 1135
250 EPMH (Coated) A A A 1136
400 EPMH A A A 1131
400 EPMH (Coated) A A A 1132

GE Lighting Systems, Inc.


www.gelightingsystems.com
A-90/2008
WALLMOUNT TM 400 LUMINAIRE

FIXTURE DIMENSIONS

DATA
Approximate Net Weight 25-40 lbs 11-18 kgs
Suggested Mounting Height 8-20 ft. 2-6 M

ACCESSORY DIMENSIONS

PHOTOELECTRIC CONTROL KIT WIRE GUARD WG-WMTS POLYCARBONATE VANDAL SHIELD


LVS-WMTS

REFERENCES 
See Page A-97 for start of Accessories. 
See Page A-101 for Explanation of Options and Other Terms Used.

GE Lighting Systems, Inc.


www.gelightingsystems.com
2008/ A-91

You might also like