Professional Documents
Culture Documents
PAGES
Construction of the fabric The lot size for processing Dyeing machine/liquor volume
Warp :- 50/36 Bright Size Beam / Weft :- 150/36 Crepe Reed 80-84 / Pick 60- 62 2000 mtrs. - (10 kgs. / 100 mtr.) U - Jet Dyeing machine / 600 ltr.capacity
The Process sequence of Polyester Royal Crepe fabric from grey to the finished stage Desizing / Scouring Sodium Hydro Sulphite Caustic Soda Levocol TFL Levocol NID Temperature Sodium Hydro Sulphite Caustic Soda Levocol SCR Temperature Acetic Acid Oxalic Acid Temperature White R Coralene Dyes Levocol DFT Levocol PB Levocol PB Levocol WS Temperature Levocol DFT Temperature Pad in Levocol PB Heat set @ Coralene Dyes Levocol PB Levocol KBI Levocol HTS Soft Water Printex CT-50 500 gms. 500 gms. 1500 gms. 500 gms. 950C./60 mins. 500 gms. 1000 to 5000 gms. 1500 gms. 1300C./30 mins. 1000 gms. 500 gms. 80C.-900C./15 mins. X% OWF X% 1-2 gpl. 1.0 gpl 0.5 gpl. 1.0 gpl 1300C./30 mins. 0.25 gpl 1300C./30 mins. 0.3% - 0.5% and 1800C / 30 sec. X% 1.0 % 0.5 % . 0.75 % Y% (8% Stock Paste)
Weight Reduction
EXECUTIVE
Print - Dry - High Temp. Steaming at 1700C./8 mins Cold Wash - R. C. - Cold Rinse - Neutralization - Dry
Finishing at 1750C Silicon Softener (12%-14%) Soln Epoxy base/Carboxyl base Softener (43% - 45%) Shrinkage - Approx Final width 2% - 3% 0.25% 12%-14% 107-112cm.
This process may be modified to suit customer requirement of fabric body and feel
This information is provided in good faith, to the best of our knowledge and without liabilities.
This page is sponsored by : Colourtex Pvt. Ltd.
Email : pradeep.mistry@colourtex.co.in
NCM-NOVEMBER 2011 32