You are on page 1of 2

13 06 2012

Maryland Metrics Technical Data Chart: General Tolerances to DIN ISO 2768

THINK!- MARYLAND METRICS - The One-Stop Source For Metric And British Sized Fasteners, Wrenches, Cutting, & Measuring Tools, Metal Shapes, Oil Seals, O-Rings, Mechanical Power Transmission Equipment, Bearings, Hydraulic And Pneumatic Fittings & Tubing, Workholding Components, Plumbing Fittings, & Some Electrical & Electronic Components. Click to go to Maryland Metrics home page

Maryland Metrics Technical Data Chart: General Tolerances to DIN ISO 2768 T1 and T2
The latest DIN standard sheet version applies to all parts made to DIN standards. Variations on dimensions without tolerance values are according to "DIN ISO 2768-mk".
GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS (DIN ISO 2768 T1) LINEAR DIMENSIONS: Permissible deviations in mm for ranges in nominal lengths 0.5 up to 3 over 3 up to 6 over 6 up to 30 over 30 up to 120 over 120 up to 400 over 400 up to 1000 over 1000 up to 2000 over 2000 up to 4000

Tolerance class designation (description)


f (fine) 0.05 0.05 0.1 0.15 0.2 0.3 0.5 m (medium) 0.1 0.1 0.2 0.3 0.5 0.8 1.2 2.0 c (coarse) 0.2 0.3 0.5 0.8 1.2 2.0 3.0 4.0 v (very coarse) 0.5 1.0 1.5 2.5 4.0 6.0 8.0

EXTERNAL RADII AND CHAMFER HEIGHTS Permissible deviations in mm for ranges in nominal lengths 0.5 up to 3 over 3 up to 6 over 6

Tolerance class designation (description)


f (fine) 0.2 0.5 1.0 m (middle) 0.2 0.5 1.0 c (coarse) 0.4 1.0 2.0 v (very coarse) 0.4 1.0 2.0

ANGULAR DIMENSIONS Permissible deviations in degrees and minutes for ranges in nominal lengths up to 10 over 10 up to 50 over 50 up to 120 over 120 up to 400 over 400

Tolerance class designation (description)


f (fine) 1 030' 020' 010' 05' m (middle) 1 030' 020' 010' 05' c (coarse) 130' 1 030' 015' 010' v (very coarse) 3 2 1 030' 020'

mdmetric.com/tech/DINISO1302extract.htm

1/2

13 06 2012

Maryland Metrics Technical Data Chart: General Tolerances to DIN ISO 2768

GENERAL TOLERANCES FOR FORM AND POSITION (DIN ISO 2768 T2) STRAIGHTNESS AND FLATNESS Ranges in nominal lengths in mm up to 10 over 10 up to 30 over 30 up to 100 over 100 up to 300 over 300 up to 1000 over 1000 up to 3000 Tolerance class H 0.02 0.05 0.1 0.2 0.3 0.4 K 0.05 0.1 0.2 0.4 0.6 0.8 L 0.1 0.2 0.4 0.8 1.2 1.6

PERPENDICULARITY Ranges in nominal lengths in mm up to 100 over 100 up to 300 over 300 up to 1000 over 1000 up to 3000 Tolerance class H 0.2 0.3 0.4 0.5 K 0.4 0.6 0.8 0.8 L 0.6 1 1.5 2

SYMMETRY Ranges in nominal lengths in mm up to 100 over 100 up to 300 over 300 up to 1000 over 1000 up to 3000 Tolerance class H 0.5 0.5 0.5 0.5 K 0.6 0.6 0.8 1 L 0.6 1 1.5 2

RUN-OUT Tolerance class H 0.1 K 0.2 all dimensions in mm L 0.5

THINK!- MARYLAND METRICS - The One-Stop Source For Metric And British Sized Fasteners, Wrenches, Cutting, & Measuring Tools, Metal Shapes, Oil Seals, O-Rings, Mechanical Power Transmission Equipment, Bearings, Hydraulic And Pneumatic Fittings & Tubing, Workholding Components, Plumbing Fittings, & Some Electrical & Electronic Components. Click to go to Maryland Metrics home page
Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time. Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime. Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM. [ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ] Please note that all Trademarks and Tradenames are the property of their respective owners. copyright 2004, 2006, 2011 maryland metrics -- all rights reserved -- ver gg22aCD DINISO1302extract.htm

mdmetric.com/tech/DINISO1302extract.htm

2/2

You might also like