You are on page 1of 26

LONGITUDINAL DIELECTRIC WAVES IN A TESLA COIL AND QUATERNIONIC MAXWELLS EQUATIONS

Revised and enlarged

Roberto Handwerker (Dr.Eng.) DELTA Ingegneria - March 2011, Milan, Italy deltaavalon.com

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. Revised and enlarged
Roberto Handwerker (Dr.Eng.) DELTA Ingegneria - March 2011, Milan, Italy deltaavalon.com
Abstract
The electrical transformer known as the Tesla Coil with all its peculiar characteristics has always been officially considered only as an electrotechnics device, a pure and simple transformer, and as an apparatus for producing sparks, lightning-like discharges, high voltages and impressive electric effects. By closer scientific investigation of the device it is however possible to throw new light on some aspects of the coil invented by Nikola Tesla more than a century ago, in particular regarding the emission of powerful dielectric longitudinal waves. An analysis supported by a physics/mathematics approach which recalls the original quaternionic notation of Maxwells equations which involves the prediction of the existence of dielectric scalar fields and longitudinal waves and which is also supported by empirical experimentation and research on the device itself is made. This new point of view discloses some new and striking facts regarding the coil and the related energy field, which leads to a completely new and surprising realm. However, it seems puzzling that the possibility of existence of dielectric scalar fields and of related dielectric longitudinal waves is still not accepted by the Academic World, which in turn gives neither sufficient justification nor proves to support its sceptical position which excludes the existence of said waves. In particular, to this revised and enlarged edition is added a general physics explanation of powerful natural occurring phenomena related to longitudinal waves: for instance sound, tsunami and seismic waves are briefly illustrated in order to better understand their common characteristics and the their basic principles, which are also related to dielectric longitudinal waves. Last but not least, a few notes about some considerations made by Nikola Tesla and about his peculiar concepts on radio broadcast and wave propagation through surrounding media are included, which also allow a brief scientific reflection about some natural phenomena as seen from a different point of view; this facts help remember that Gods Creation is vast and there is still a lot to explore.

HIGH VOLTAGE HAZARD

DISCLAIMER: WARNING ! THE FOLLOWING EXPERIMENTS AND TESTS MAKE USE OF HIGH FREQUENCY RADIO WAVES AND HIGH VOLTAGE (POSSIBLE EMISSION OF X-RAYS, UV AND OTHER HARMFUL RAYS): PLEASE DONT TRY TO REPLICATE THESE UNLESS YOU ARE WELLEXPERIENCED AND SKILLED IN HIGH-TENSION ELECTROTECHNICS AND RADIO-TECHNOLOGY: DANGER OF SERIOUS AND EVEN FATAL INJURIES TO PERSONS, DAMAGE TO PROPERTY BY MISUSE !

RADIO WAVES HAZARD

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

Summary

1. Introduction4 2. Maxwells equations5 3. Dielectric induction phenomena and dielectric longitudinal waves9 4. Transmission of energy through air and related measured values11 5. Notes on Tesla Coil tuning16 6. Streams, brushes, discharges and effects in Tesla Coils lamp bulbs17 7. Analogy between electrotechnics and fluidics18 8. Conclusion24 9. Legenda25 Bibliography and references26

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

1. Introduction It is well known that J.C. Maxwell issued in 1873 his A treatise on electricity & magnetism[1] where he presented in an elegant form the results of his studies, writing some 20 E.M. equations; in the beginning he thought to make use of quaternions[8], whose calculation was but not quite simple, later Heaviside and Gibbs introduced the vector notation, in order to simplify the equations. It will be useful to remember that quaternion numbers consist in four terms, whereas vectors consist only in three terms as in following example:

= a + bi + cj + dk V = ax + by + cz
The two systems follow different calculation rules, for instance the former has anticommutative property, the latter on the contrary has commutative property.

50

TESLA COIL XMTR

Sec. 250 Fig.1 210 Pri. G 200 4

Fig.1: Tesla coil Transmitter (XMTR) used in laboratory during tests; the particular design utilized in the investigation is called Extra Tesla Coil, having cylindrical form and being mainly constituted by a primary coil (Pri.), a secondary coil (Sec.), top capacitance (bulb) and a high frequency-high voltage generator (G). Measures are in [mm]. Regarding the existence of longitudinal dielectric waves, there are two possible explanations about why these do not appear in the wellknown todays Maxwells equations, which are the fundament of modern electromagnetism: a) Todays vector notation was introduced, after the death of J.C. Maxwell, by Heaviside and Gibbs who simplified the original quaternionic[8] notation proposed by Maxwell; therefore the actual set of equations would be partially incomplete, thus not including longitudinal waves.

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

b) J.C. Maxwell first issued his set of equations in 1865 including electromagnetism related phenomena which has been observed or at least which he reported, that he judged to be fundamental; but N. Tesla discovered new dielectric induction phenomena only later, in 1892. Anyway, the two above possibilities does not exclude each other. 2. Maxwells equations The (Heavisides) commonly adopted vector equation in differential form is following: notation of Maxwells

. B = 0 . E = /o x E + B/t = 0 c2 x B - E/t = J/o

(Magnetic flux theorem) (Gausss Law-Dielectric flux)

(Faradays

law)

(Ampres law)

where: E = dielectric field; B = magnetic field; = charge density; 0 = dielectric constant in vacuum; /t = time partial derivative; J = current intensity.

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

XMTR

RCVR

GND Fig.2
Fig.2: Two flat spiral Tesla coils or pancake coils: a Transmitter (XMTR) and a Receiver (RCVR) both connected to the ground as described in Teslas Patent n.649621 from May 1900. The employ of quaternions by informatics increases computer calculation speed and allows memory space spare up to 55%, which is a great advantage for instance in aerospace navigation (typically in inertial platforms)[5]; their application to Maxwells equations reveals some unexpected elements. Starting from another point of view it would be possible to write the Maxwell set of equations by the quaternion notation, which even if it is more complicated on one hand, on the other hand it leads to some unexpected and striking results which in particular involve the prediction of the existence of longitudinal dielectric waves; this fact was already claimed by other Authors (for example Ignatiev G.F. & Leus V.A.)[10] and on the basis of some R.F. (= Radio Frequency) experiments by the employ of transmitting and receiving devices with ball-shaped antennas even from others. Besides this, if the claimed possibility by some physics (see appendix: Arbab A. & Satti Z.[6]) of deriving Maxwells equations from only one wave quaternion vector potential or:

= (i/c , A)
where:

= o J

J = (ic, J)

by respect of the Lorenz gauge will be considered as accepted, so it will be possible to take into account an extended result of todays Maxwells vector form. This imply the existence, besides the wellknown E.M. Transverse waves (T.E.M.= Transverse Electro-Magnetic), also of Longitudinal waves (L.M.D.= Longitudinal Magneto-Dielectric), whose scalar potential is related to its dielectric field E by following equation:

E =

This theoretical result was also supported from experimental laboratory investigation which made use of Tesla Coils which are, as it will be readily seen, not only transformers for high frequency

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

i[mA] 200

: measure with inductance : measure with photomultiplier

L LEDs 50 0,5 Fig.3 1 1,5 2 2,5 x[m] Fig.4

Fig.3: Diagram shows the relationship between energy field intensity and distance of the photomultiplier (type 931-A) from the XMTR Tesla coil as a function of current values read by quantitative measuring device (M); the dots shows normalised measured values whereas the dotted line shows the expected quadratic diminishing curve for waves by increasing distance (x) from the Transmitter. Fig.4: Small wire loop (L) series connected with two LEDs of different colour and slightly different sensibility was used as a detector for resonance frequency and as an auxiliary qualitative measuring device of the Tesla coil field intensity for tuning purposes. low voltage into high frequency (= HF) high voltage (= HV) or devices for creating spectacular lightning-like electric discharges, but are also a useful means to show the existence of the dielectric longitudinal field, which is generated by the peculiar design and construction of the coil itself. In fact, it will be shown the capability of this kind of field of transmitting electrical energy and not only weak signal in the surrounding medium, and to drive not only light bulbs and neon tubes as commonly thought, but even common DC electric motors under proper conditions (see Fig.17). The investigation has been conducted by means of empirical observation, experiments and tests with the help of basic electrotechnics measuring devices as oscilloscope, analogic multimeter (having more inertia due to internal coil and indicator, so being less affected by fluctuations), small pocket AM radio receiver device, brass metal plates, copper wire loops with LEDs as detectors and other rather common devices to detect and analyse E.M. (= Electro-Magnetic) fields and waves: it was avoided the use of complicated systems according to the keep it simple philosophy also in order to make following experiments and tests fully replicable, which is of course the main requirement of scientific investigation and research. For the complete calculation reference is made to Arbab A. & Satti Z.[6], and it will be readily shown that according to their work, Maxwells equations could be simply expressed in the quaternionic form by the following two equations:

1/c2 2E/t2 -

E = -1/o (
2

+ 1/c2 J/t) x J)

(1) (2)

1/c2 2B/t2 -

B = o (

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

x Er XMTR ELMD

V M C i(t) M GND M

GND Fig.5

Fig.5: Suspended insulated metal plate (P) (dimension: 120x130mm) series connected to a quantitative measuring device (M) and to ground; the plate acts as a receiver of energy, which gives rise in the plate to a comparatively strong current that flows through the device into the ground; a vacuum tube device (V) type 931-A (see picture) was then connected to the measuring device (M) instead of the metal plate (P) in order to further analyse the dielectric field. An iron cored coil (C) was also connected to device (M) to analyse magnetic field. The generic scalar field was introduced and consequently also the current intensity can be written as J = , the following new gauge transformation can be considered:

'= + 1/c2 /t

and

J= J -

(3) and (4)

it is then noted that the scalar satisfies the wave equation:

1/c2 2 /t2 -

= -(

.J + /t)

(5)

Further, from the above mentioned work it would descend that the charge density and the current intensity J would travel at the speed of light; so Maxwells equations could be seen as a special case of equations (1) and (2). Then, this implies that the scalar wave distribution would therefore induce a charge density:

= -1/c2 /t
and a current intensity:

(6)

J =

(7)

even if charge and current J were not present in a particular zone. This aspect could help explain for example the working principle of an electric condenser (capacitor), otherwise stated why metal plates which are separated by a dielectric non-conductive material, therefore not in direct contact between them, do conduct an electrical current: it is
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

fluids

solids

ETEM x T.E.M.

ELMD

ELMD x L.M.D.

Fig.6
Fig.6: The two wave components of the energy field known as the T.E.M. (= Transverse Electro-Magnetic, ETEM) and the L.M.D. (= Longitudinal Magneto-Dielectric, ELMD) have the same propagation direction (x). Recalling the hydrodynamic analogy between electrotechnics and fluidics, sea waves visualize, at least ideally, an example of T.E.M. (surface waves) and L.M.D. (deep tsunami pressure waves). then noted that commonly alleged theories of displacement currents phenomena do not constitute a really convincing explanation, in particular it is not clear how an electron current could freely pass or jump through the dielectric according to common theories; an interesting hint to this is given by Steinmetz C.P.[7] if the possibility is considered, that by electrostatic (i.e. dielectric) fields charges are not only confined on the surface of the charged conductors, but are even present in the surrounding space, just in a similar way as it happens for magnetic fields. This is a physical and mathematical approach and also a possible explanation to the question marked as a) in the introduction. 3. Dielectric induction phenomena and longitudinal dielectric waves The second question set in the introduction and marked as b) departs from mere mathematical/physical calculation and is rather related to the researches and experiments of Dr. N. Tesla, which in 1892 observed what he often used to call curious and striking phenomena of electricity, which he described in his writings or during his academic lectures delivered before the Scientific Community[3],[4], and that made him practically abandon his studies on high frequency alternating currents and start exploring a new realm. The phenomena referred to have yet partially been observed for example in 1872 by Elihu Thomson[9] during a lesson at the Philadelphia High School, where he was a teacher. By doing a demonstration with a Ruhmkorff induction coil and willingly to better show the effects to the students sitting far from the device, he made some changes in the circuit obtaining, instead of the normally displayed purplish-blueish sparks, impressive big and white electric discharges, and metal objects in the room became strangely electrified and kept throwing sparks in the surrounding space as the device was turned on. This effect could have been due to a new and peculiar form of dielectric induction. Tesla realised a number of devices in order to better investigate the matter and at the end perfected his particular Coil, a seemingly simple device but hiding many peculiar characteristics as regards the transmission of energy and signal through the natural medium, which will not be discussed here, and last but not least, to
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations.

N ELMD XMTR A D AM-RCVR Fig.7


Fig.7: Neon tube (N) in the XMTRs energy field lit to its full brightness without any energizing wire connected to it nor other energy supply; a double copper wire loop (A) antenna series connected to a small DC electric motor (D) could be tilted up to an angle = 90 with respect to a horizontal axis without affecting the energy transmission to the motor. investigate the existence besides of a Transverse Electro-Magnetic, of a strong Longitudinal Magneto-Dielectric field in the medium around it. It is convenient at this point to shortly illustrate the construction of a typical Tesla transformer by its main components: 1234The The The The generator (H.V. & H.F.) primary (coil) circuit secondary (coil) circuit top spherical inductance (lamp bulb / metal sphere)

The generator is designed to provide currents of high frequency and high voltage to the primary circuit, which is basically constituted by a coil and a capacitor (which will be called here a condenser as used by Tesla time) and a spark-gap forming an oscillator; the primary is coupled to another coil without any iron core, on the top of which is another condenser, this time of spherical form, together forming the secondary of the transformer. The secondary coil can be connected or not to the ground. The above described coils with the related suitable generator constitute the XMTR (= Transmitter), whereas a similar device also comprising a primary and a secondary, but without the generator, constitutes the RCVR (= Receiver). The connection between the two devices can be made by a single wire, by the ground or by water, however here will be only discussed the XMTR with respect to the generation of longitudinal dielectric waves; of course the device emits also usual T.E.M. waves because of the solenoid form of its coils. It is to be noted that the capacitance on the top of the secondary coil has a spherical form; when the generator energizes the oscillator in the primary, energy transfer occurs to the secondary of the transformer by dielectric induction without the presence of any iron core in the coils. The energy of the primary is inducted to the secondary where the voltage is greatly increased to huge values depending from the construction parameters of the device as material, components, dimensions, proportions etc., even if it can be stated that already a few turns of wire in the secondary coil could give rise to hundreds and even to millions of Volts without any difficulty as it should be for well-tuned Tesla Coils. The HF-HV is maximum on the top of secondary corresponding to the sphere capacitance/condenser (in this case an argon lamp bulb because of the small dimension of the
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 10

Et XMTR Er ELMD ETEM

i(t)

M GND

Fig.8
Fig.8: A brass metal plate (P) connected by only one wire to an analogic multimeter and then series to ground was used to analyse the field around the XMTR; by rotating the plate (P) around its vertical axis, the received energy varied as shown in diagram of Fig.9. device) which together with the secondary acts as an antenna; it is useful to remember again that in Nature waves can exist in the transverse form, that is having direction perpendicular to the propagation direction, and in the longitudinal form, that is having direction parallel to the propagation direction. Transverse waves are, as is well known, typically generated by antennas such as conducting dipoles or even in general by AC electrified wires, but in the present case in addition to the cylindrical solenoid coils (the primary and the secondary) also a spherical antenna is present which cannot emit transverse waves because of its form which mathematically annuls the opposing components of the transverse E.M. waves, therefore only allowing the emission of longitudinal MD (Magneto-Dielectric) waves. As already stated, even if components of usual transverse E.M. waves are also present because of said cylindrical/solenoidal wire coils, however the latter are not the cause of the effects below described, which are not magnetic in their nature but dielectric. The term electric field comprises here both dielectric and magnetic fields, as referred to by Steinmetz[7]: dielectric will not also encompass the magnetic part of the E.M. field. According to the hydrodynamic analogy between fluidics and electrotechnics, as in the former example of sea surface waves and deep tsunami waves (pressure or compression waves) are ideally observed, for the analogys completeness the same should be for electric waves with transverse and longitudinal components otherwise said analogy would be invalidated. 4. Transmission of energy through air and related measured values Tests: in the laboratory several test were performed to investigate the emission of L.M.D. waves from the Tesla coil transmitter, even if it was quite not a simple thing to do. Qualitative measurements: First a rather simple and crude but clear test was readily made by keeping in the hand a common neon (fluorescence) tube without any

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 11

i[mA] 100 75 50 25
Fig.9: Diagram shows the relationship between the angle formed by the brass plate probe (P) and the propagation direction of the waves (versor Er): it is noted from the dotted line (a cosine function curve) that when = 0 (0) (or of course even when = 2 (360)) that is by versor Er parallel to plate, the measured value of current i or, in other words, the energy received from the brass plate (P) was at its minimum, while it was at its maximum by = /2 (90) and = 3/2 (180)(by versor Er perpendicular to brass plate), showing that no transverse E.M. waves components play a relevant role but L.M.D. waves do. This polarization test measure shows that plate rotation around its axis in the vertical plane is indifferent to the vertical T.E.M. Et field, but not to L.M.D. Er field. connected energizing wires and by simply approaching it to the XMTR (see Fig.n.7): when the tube was moved to the Tesla coil i.e. it was set in its energy field, the neon tube amazingly lighted up, at first only faintly, until it came to its full brightness as it was moved closer to the coil (note that this result is very difficult if not impossible to achieve by magnetic fields, but not difficult at all by dielectric fields of well-tuned Tesla Coils). - second, in order to exclude any relevant action due to the presence of magnetic fields, a normal compass has been moved in the energy field of the transmitter: the compass nail indicator stood still, never showing any kind of movement; on the contrary, when it was set on a normal small transformer its indicator immediately started to move (see Fig.n.10). - and third, as a further qualitative detector of the field intensity of the XMTR was employed a common PVC insulated copper wire loop (square section: S=2,5mm2, with wire loop diameter D= 100mm,inductance value L= 0,001mH) series connected with two oppositely paralleled LEDs, by different colours (yellow and blue), lighting up approximately in the range: : measure with metal plate

Fig.9

3/2

/2 [rad]

Umin= 0,6 Umax= 2V

(t1)

and having a slightly different sensibility; this detecting device was moved in the Tesla Coil field in the horizontal plane i.e. in an unfavourable position for T.E.M. waves so to detect mostly L.M.D. waves. It was also employed for tuning purposes as it readily and precisely detected the presence of resonance by voltage rise in the Tesla coil oscillator, therefore indicating when the intensity of the energy field was greater as the LEDs were at maximum brightness and beyond, as some of them did burn out due to excessive voltage.
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 12

compass sphere cap ELMD I nail Fig.10


Fig.10: A Coil: its the same indicator field. normal compass was set in the energy field of the Tesla nail indicator (I) showed no movement, on the contrary when compass was approached to a normal E.M. transformer the immediately started to move, thus detecting a magnetic

BTEM TR

The energy field of the transmitter had not only the effect of lighting up neon tubes and LEDs but was used, always within the near field, for energizing a small DC electric motor (D) to drive an electric vehicle (model) in the range of the XMTR, which was of small power. The receiving antenna was constituted by a double turn of two coarse copper wire loops, series connected with a small electronic rectifying circuit and with the DC electric motor in order to transform the HV and HF received power into DC (rectified) low voltage; to prove that in the energy transmission no T.E.M. waves were involved, the double loop antenna was tilted from the vertical plane to the horizontal: the result was the same, i.e. energy transmission within said range from XMTR occurred by L.M.D. induction, By T.E.M. waves as a matter of fact, a receiving antenna must, in order to achieve maximum efficiency, always stand with its axis perfectly vertical to the ground just like the direction of (T.E.M.) vector Et. In the present case however, the antenna loop could without any problem be tilted to the ground that is to the horizontal plane and still continued to receive energy from the XMTR, proving that T.E.M. waves were here not mainly involved in driving the DC motor, which requires of course power and not only weak signal to run. - A common small pocket AM/FM radio receiver was used to detect R.F. emitted from the Tesla Coil by moving the device away from the coil axis to a distance, to investigate the field of the XMTR itself, which generated an audible signal to about the range reported in Fig.n.3., so not very far from the AM-RCVR itself. Quantitative measurements:

- An iron cored inductance (C) (a cylindrical copper wire coil with a ferrite core and with its coil terminals connected by two wires to the multimeter instrument), was employed to detect the magnetic field: the measurements were taken by moving the inductance away from the Tesla coil, at first with the iron core inserted in the same coil (having thereby an inductance of L= 10mH), then without the iron core (thus having an inductance reduced to L= 6mH): the normalised results of the test are illustrated in diagram of Fig.3, thus showing that there was no difference between values measured with or without the iron core because relevant magnetic induction on the coil was absent, but evident dielectric induction was present and preponderant.
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 13

ELMD sphere cap P B

Fig.11
Fig.11: A suspended insulated brass metal plate (P) set in the energy field of the Tesla Coil became dielectrically charged and threw off sparks to approached objects, for instance to a small metal plate (B). - Another test with related measurements was made by connecting by a single wire the analogic multimeter (used as a milliamperometer) to a photomultiplier vacuum tube (V) type 931-A from R.C.A.-U.S.A (to its pin n.11 - cathode); then by moving the phototube away from the XMTR axis, the energy field was again measured giving similar results (normalised values) as regards to inverse square decrease with distance from the coil axis, once more showing that a dielectric field was involved (see Fig.n.3). In addition, the phototube device was rotated around its three axis in different positions but this didnt affect the results in a relevant way. - Moreover, a further investigation of the energy field around the XMTR was made also by use of a suspended insulated metal plate made of brass, as well-known a non-magnetic material, which was connected in series by a single wire to a measuring device, in this case an analogic milliamperometer with a scale range of current i(t) = 0 100 mA, which in turn was connected to ground. The comparison of this feature with the one described in Teslas patent n.685957 of 1901, which illustrates an (apparent) puzzling use of a similar insulated metal plate for utilizing radiant energy also in association with other auxiliary devices, is remarkable. A quantitative measure of the (infinitesimal) absorbed power by the plate, i.e. received from the XMTR, could be made as follows with a plate of dimension S = B x H (surface=width x height) and the angle between plate and versor Er

dP= dV2/dR
being R: ohmic resistance in a conductor, so

(t2)

dR= dx/dS
where S= surface of brass plate conductor) and being:

(t3)

dV= Eo cos()dx

(t4)

the voltage in the infinitesimal part dx (being dx an infinitesimal depht element) of the receiving brass plate, so its infinitesimal absorbed dielectric power is then a function of cosine:

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 14

ELMD

i(t) M M

Fig.12

Fig.12: A common condenser (capacitor) (K): an electric current flows through opposite conducting plates even when separated from a dielectric; the plates could be separated and moved to a comparatively considerable distance, however a connected impedance-meter instrument (M) kept reading an impedance value: the plates felt one another. and by mathematical integration it comes to the absorbed energy A from the plate itself: dP= f((cos2())dx (t5) so it becomes:

A =f(cos())

(t6)

- At the end of the investigation one more last test, but not least, was performed: a suspended (by a non-conducting wire) insulated small (about 120x130mm as before) thin brass metal plate (P) which was set in the energy field of the Tesla Coil became strongly charged by dielectric induction from the coil: as a smaller (about 50x50mm) metal plate (B) was approached to the first plate (P), the (big) brass plate threw off sparks to the small one and even to an approached hand (see Fig.n.11). These experiments and tests could be useful to better understand the working principle of a common condenser: how an electrical current can pass or jump through the dielectric non-conducting material between the opposite metal plates ? According to the accepted theory, this would be caused by displacement currents on the surfaces of the plates. Therefore, a simple tests would made by positioning two parallel opposite condenser plates (square dimension: 40x40mm of very thin brass) with air as dielectric, each connected to one terminal of an impedance-meter (type MK5540 from Mitek). At first the plates were set at a distance of 1mm from one another, then these were moved apart to more than d= 1m but kept always connected to the impedancemeter: the instrument read a capacitance value of C=0,040mH for near plates and of C=0,012mH for far plates. Even if the distance between opposite condenser plates was increased up to >1000 times, or equal to >25 times the plate dimension, the instrument did anyway read a value, so despite of distance the plates felt one another; according to

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 15

XMTR

RCVR

G D

GND Fig.13 N

Fig.13: Two flat spiral Tesla coils or pancake coils connected through the ground; the XMTR with its (H.V., H.F.) generator and the RCVR with its electric utilities: a neon tube and a DC motor. C.P.Steinmetz[7] this phenomenon could be better explained as follows: the dielectric field is not only confined on the surfaces of the conductors but is also present in the surrounding space in a similar way as for the magnetic field. The dielectric field issues from the conductors and the related lines of force pass from one conductor to the other (see Fig.n.12). The commonly accepted theory of the charge displacement seems here to be a rather weak explanation with respect to the dielectric field and related lines of force. 5. Notes on Tesla Coil tuning All these test were performed in order to investigate nature and intensity of the energy field around the Tesla coil, which was stronger when resonance in the device was present or, in other words, when the coil was well-tuned. To precisely detect the main frequency fo of the Tesla coil XMTR, a digital oscilloscope GDS-820-S series from GW-Instek was used and the related wired probe was placed about d= 2m from the XMTR: the main resonance frequency was confirmed to be fo= 2,755 MHz with another main frequency at f= 1,810 MHz; it is noted that the relationship between said main frequencies is: fo / f= 1,527 MHz (/2)f. As it is: o= c / fo (where c: speed of light in vacuum) (t8)

said frequency corresponds to a wave length of o= 113,64m or to o/4= 28,41m (or quarter wave-length), this means that the tests were performed in the so-called near field; regarding this aspect it could be objected that it would invalidate the experiment but, on the contrary, just by keeping the distance d from the XMTR much smaller than a quarter wave-length or /4, the T.E.M. components of the wave had less possibility of influencing the test, thus allowing the L.M.D. components to mainly play.
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 16

Fig.14 a) b) c)

Fig.14: Light streams, brushes and discharge effects in Tesla coils lamp bulbs (secondary top capacitance); pictures shows streams as illustrated in (a) and brushes as in (c) respectively. 6. Streams, brushes, discharges and effects in Tesla Coils lamp bulbs Beyond scientific investigation, well-tuned Tesla Coils shows curious effects: beautiful light streams or brushes are emitted when the secondary coil top capacitance is a lamp bulb instead of a metal sphere, for example an argon gas bulb[11]; when the coil is running, depending of the driving generator employed, strange light streams fill the bulb itself varying very much in the form with the coil design and also with voltage, frequency and a number of other parameters. For instance, the streams filling the bulb of the Extra Tesla Coils used by the present investigation looks more like plasma effects and have different colours among which mainly yellow, orange pink and violet. When the two Tesla Coils (XMTR and RCVR) are connected through only one wire or through the earth conductor (or even water) and they are well-tuned, they both show streams in their own bulbs. These coils really communicate with one another as it is fairly clear by just approaching a hand to the XMTR bulb: if its streams become weaker, on the contrary the streams in the RCVR bulb become stronger and vice-versa. It is not here a mere question of wave transmission from the XMTR to the RCVR as it happens for usual socalled T.E.M. radio broadcasting, whereby the transmitter cannot be influenced in any way from the receiver, but a peculiar energy interaction between the two Tesla coils occurs, as true conduction phenomena were involved. Moreover, the movement of the streams is peculiar, as these sometimes even show at first a rotation around their axis, then they stop rotating and tend to establish a rather stable flux pattern issuing from the lamp filament to the glass bulb, depending of the adjusting of several parameters, and is also due to electrostatic or dielectric action according to the definition given by C.P.Steinmetz[7]; as before stated, brushes or streams may change very much even in their nature, from smooth and widening plasma flux spreading to the bulb (see Fig.n.14.a) to soon become a violent electric discharge (see Fig.n.14.b) when an object is moved close to the bulb. By higher pressures in the Tesla coil, the streams can turn into brushes of even strong discharge of blue, purple or of other colours (see Fig.n.14.c). These remarkable features should be closer investigated, as the sphere capacitance also emits L.M.D. waves, which as already stated are dielectric. Fig.n.15 shows two energized flat spiral pancake Tesla coils with streams in their top capacitance lamp bulbs; on left is the RCVR drives a small DC motor with a green LED connected to show it works by energy transmission[12].
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 17

Fig.15
Fig.15: Two energized flat spiral or pancake Tesla coils showing yellow/orange streams in the top spherical capacitance lamp bulbs and the same bulb type being hold in hand showing pink/violet discharges. By adjusting some parameters in the Tesla coil, curious effect of repulsion and attraction were then observed[11]: if a hand was approached to the lamp bulb, under certain conditions, a kind of pressure was felt by the hand; on the contrary, if a small suspended metal strip was approached to the same bulb, the conducting material was attracted to it. This repulsion and attraction effects are evidently due to dielectric (electrostatic) action. 7. Analogy between electrotechnics and fluidics As well known there is in physics a nice analogy between electricity and hydraulics (as well as between mechanics/construction science and hydraulics), that implies that laws and equations which rules them are similar or analogous; this fact implies that, so to speak, there is a parallel of, for instance, tension and pressure, flow of current and of fluid etc. . To make the similarity more clear it can be stated that transverse and longitudinal wave forms as observed in ocean water respectively ideally resemble surface waves and effectively represent high pressure waves (longitudinal) in the deep, in a similar way should it be in an electric conductor; as the analogy is yet accepted from physics, there is no reason to deny the validity of the similarity for the above mentioned waves: in other words, why dielectric longitudinal waves should not exist ? In such a case, this would automatically imply that the analogy referred to would be incomplete or false. As a matter of fact, the existence of longitudinal dielectric waves in an electric, typically copper, conductor is well supported from some wire fragmentation test conducted by J.Nasilowsky[13] and also other Authors, where wires were exploded by means of the application of huge electrical currents that caused the wires to break by stress, which clearly manifested itself by parallel break stripes perpendicular to wire axis, showing in addition that no material melting was involved in the process but just material stress. This stress occurred, as this was evident from the fragmentation characteristics in wires, in zones of charge density variation (alternate rarefaction and compression), meaning that a true pressure waves phenomenon (longitudinal) had taken place in the wire resulting in excessive tensile stress in the material and its consequent break due to override of material tensile limit (i.e. mechanical resistance). Maxwell wrote that the alleged dielectric longitudinal waves would theoretically only have been possible in cases of variation of charge density in the direction of
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 18

S-waves Earth Seismic epicenter P-waves

Fig.16
Fig.16: A cross section of earth is showed, where seismic primary waves pass through core and travel faster than secondary waves, moreover the latter cannot pass through it as it is partially fluid. propagation (so not at right angles to it), and therefore concluded that this condition was not possible to achieve; on the other hand must be noted that he wrote his Treatise in the 1800s, that is quite two hundreds years ago: for instance, Maxwell didnt predict neither laser, nuclear energy, solar panels nor space travel but this evidently doesnt mean that all these things are not possible at all ! Longitudinal waves are due to alternate compression and expansion (i.e. density variation of electrical charge) occurring in the same direction vector of wave propagation, which implies the presence of a time dependent dielectric scalar field and not of a vectorial one. To better understand the behaviour of an electrical conductor, for instance in a copper wire, under action of electric waves, maybe could help to bring one more example: be it considered a steel spring which is held between two hands and in which the opposite ends are: a) alternatively compressed and relaxed in the axis direction b) alternatively bent up and down around a perpendicular axis c) alternatively shifted up and down at right angles to axis these three situations corresponds to the following type of waves: a) longitudinal waves (oscillation in the propagation direction) b) standing waves (oscillation at right angles to propagation dir.) c) transverse waves (oscillation at right angles to propagat. dir.) so these mechanical vibration modes of a spring will help to better explain and clarify how the different wave types act in a conductor. Besides tsunami waves in the sea, there are in Nature several other examples of longitudinal waves: maybe the most common at all are sound waves, that is pressure variations in a medium such as a solid, a liquid or a gas; in these various media the propagation speed of these powerful waves is obviously different, and the related formulae for sound speed are following in media such as: solids:

VL = (E/)

where E > G (always)

(8) (9)

VT = (G/)

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 19

XMTR

RCVR electric motor

Fig.17
Fig.17: A Tesla coil with a spherical antenna as top capacitance on its secondary can energize in his field not only neon tubes but also electric motors, for instance to drive a small electric vehicle.

liquids:

VL = (Ea/)

where : density

(10) (11)

VT = 0
gases:

VL = (RT/M)

where RT/M:

gas constant

(12) (13)

VT = 0

It will be then easily noted that in the case of solid media the value of VL is always greater than the value of VT, as the elasticity normal modulus E is always greater than the elasticity tangential modulus G; moreover, it is VT=0 for fluids and gases, which implies that transverse waves doesnt propagate through them. To give an indication, the speed of sound in some media is reported in the table: Sound speed in different materials at 20C Medium Air Water Glass Ether (*) Speed in [m/s] 343 1.480 5.300 c (**)

(*) according to Dr. Nikola Teslas writings[12] (**) where c ( 3.108 m/s) is the speed of light. Other well known longitudinal waves in Nature are earthquake or seismic waves, that is the so-called primary seismic waves, which are shape compression waves in earth, as secondary seismic waves are shear waves of the transverse type, in this case acting on earths surface:
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 20

wire

L.M.D. waves

break pattern (parallel stripes) x

Fig.18
Fig.18: Electrical conductor wire fragmentation tests: break pattern clearly showed that wire destruction was due to waves propagated by alternate compression and expansion, i.e. dielectric longitudinal waves, therefore not caused by material heat/fusion, but to excessive tensile (mechanical) stress (see parallel stripes perpendicular to wire axis). To recall some general theory about seismic (or earthquake) primary and secondary waves it will be here sufficient to note that the respective propagation speeds are given by the following equations:

VP =((k + 4/3)/) VS = (/)

(14) (15)

where k: elast. norm.modulus, : elast. tang.mod, : density of medium The first equation (14) contains the term k which is due to bulk elasticity modulus; this term is but not present in the second equation (15), moreover the term has only factor 1 in equation (14) whereas it has a greater factor 4/3 in equation (15), so that otherwise stated it must always be:

VP > VS
This relationship implies that seismic/earthquake primary waves (longitudinal or compression waves) always propagate faster through the planet that secondary waves (transverse or shear waves), the latter by the way do not propagate neither through fluids nor gases as equations (11) and (13) clearly showed, but only through solids as it is already well known. Seismic phenomena are of course much more complicated than here described, but the present explanation gives an indication in order to better understand and clarify the matter. A field where the above equations could for instance also be useful is electromagnetism and wave propagation through natural media, if particular reference is made to the writings[2],[12] of Dr. N. Tesla and to his curious statements regarding electric sound waves[14], as well as Hertz waves, besides the related opinion held and expressed by Lord Kelvin as he personally visited N. Tesla in his New York laboratory in 1897[15]. Nikola Tesla believed that only longitudinal waves could propagate through the universal gaseous ether medium just as light would do, but not transverse waves; therefore he also criticized the principle of the so-called common radio broadcast by transverse electromagnetic waves (which he named Hertzian waves) and compared it to an ether whistle[12]. However, this matter would be too vast and complex indeed to be treated here and would also go
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 21

air ether

Fig.19: Hypothetical composition of air as a mixture of gases owing different atomic mass; proposed according to N. Tesla, D. Mendeleev, E. Thomson and other great scientists of the time, even the ether model could be a mixture of different gases having exceedingly small atomic mass, about one millionth of the one of hydrogen, pervading everything i.e. from air to outer space. A single gas atom is able to move and rotate around its axis. beyond the aim of this writing, taking the reader much too far from the main argument dealt herein. At this point it is important to recall the wave equation which satisfies a generic scalar function u(x,t):

1/v2 2u/t2 =
where the propagation velocity is:

v = (k/)

always keeping in mind the true physical meaning of the scalar function u(x,t), for example as in the case of sound propagation in solid and in fluid mediums: sound waves in solid mediums can be o both transverse and longitudinal type, whereas sound waves in fluids as for instance gases can only be of the longitudinal type or compression waves, as it is obvious because in gases no shear phenomena can take place because of the lack of matter continuity, but just compression due to pressure variations. Therefore, if the term ether was referred to an universal pervading gaseous medium, a mixture of inert gases having atomic mass exceedingly smaller than that of hydrogen (in the order of about one millionth of its atomic mass, just to give an idea) composed by at least two gases, if not more, for which D. Mendeleev proposed the two element names X and Y and put them before the position of hydrogen in his periodic table of elements, but subsequently removed them). The concept of gaseous medium where only longitudinal waves could propagate was adopted by a number of great scientist during the Victorian age and beyond (J.C. Maxwell, Nikola Tesla, Elihu Thomson, Dimitri Mendeleev, Lord Kelvin and others) in their writings by the end of the 1800s up to the beginning of 1900s, but the concept of ether as an interstellar gaseous medium seems at present days to have been forgotten and abandoned from modern science, and only the following expression still survives, which was used in the early radio times: transmitting through the ether. The fact that those gases
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 22

would be inert is a justification of the fact that they dont react with other elements. Anyway, after the erasing of the concept of ether from official science, curiously enough, todays scientists at a certain point in the last years started seeking for an alleged dark matter and a dark energy, evidently because they must have begun to suspect or even maybe they could have recognized that something were missing: this peculiar fact seems only to be the prelude to a kind of rediscover of ether under a different name, similarly to what already happened a number of times with many discoveries of Dr. Nikola Tesla (see for instance the so-called Schumann resonance, or the radio emissions from planets and stars as pulsars, or even with some of his radio circuitry etc.). In other words, when in science such things occur to happen, it usually means simply that something that was accepted in previously postulated theories was left unclear or was incorrect so that, slowly but definitely, confusion grows to the point that this leads to revision of accepted theories about the matter, as it often occurred in Science, and introduction of new elements until correctness is finally reached and occurring problems are at last clarified.

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 23

8. Conclusion As expected, because of the comparatively moderated main resonance frequency of the Tesla coil (XMTR) itself, a limited aerial wave irradiation was obtained; the coil was in fact originally mainly designed for other purposes and not specifically to transmit energy through the air irradiating the surrounding medium with waves. Of course, a different design and construction with an eventual increase to higher levels of the main resonators frequency would cause even a bigger amount of radiated energy in the air and a stronger energy field which however was not, as said, the aim of Nikola Teslas project, whose ultimate target seemed rather to be the wireless transmission of energy through the earth/ground (see also his article[2]). In any case it is useful to remember that any scientific theory is valid as long as it will not be contradicted by empirical observation, experiment or research, and this must also be true for Teslas Wireless System. The above experiments, tests and measurements performed with the Extra Tesla Coil XMTR together with other devices clearly showed that a number of anomalous E.M. phenomena did occur, indicating that a strong dielectric energy field was present around the coil itself, which could be ascribed to the action of L.M.D. waves rather than to T.E.M. waves. Not surprisingly these empirical results could, according to other Authors, be supported from a physics and mathematical point of view by the introduction, instead of todays (Heaviside) vector form, of the (original) quaternionic form of Maxwells E.M. equations which, as could be clearly seen, do predict the possibility of the existence of scalar dielectric fields and of longitudinal dielectric waves besides the well-known transverse E.M. waves. From the above illustrated theory it descends that the scalar field has the form of an electroscalar wave, which does no work to move free charges, and which has energy flow in the propagation direction, however without converting E.M. energy into neither mechanic nor heat, and having no magnetic component. A curious aspect is that said wave has the dimension unit of a magnetic field intensity, or otherwise stated seems to be a kind of magnetic scalar. As stated, longitudinal waves belong to the most powerful expressions of energy among natural phenomena such as sound, seismic, tsunami waves etc. So further scientific investigation is needed: the position of the part of the Academic World who still excludes the existence of L.M.D. waves should also be supported by proves as it has, at the moment, neither theoretical nor experimental fundament. Anyway, officially at present everything regarding L.M.D. and ether theory seems only to belong to the realm of curious physics phenomena.

Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 24

9. Legenda: U or V : tension [Volt] I : current [A] P : power [W] F : force [N] : angle [rad] : 2 f [rad/s] : wave length [m] x : distance [m] c : 1/ (oo) speed of light in vacuum [m/s] v : speed [m/s] : scalar potential [V/m2] A : vector potential [A/m2]

: scalar wave [H]

E : dielectric field [V/m] B : magnetic field [A/m] : charge density [As/m3] J : current intensity [A/m2] 0 : dielectric constant in vacuum [As/Vm] o : magnetic permeability constant [Vs/Am] : dielectric constant [As/Vm] : magnetic permeability constant [Vs/Am] /t : time partial derivative d/dt : time derivative d/dx : space derivative : Nabla operator : quaternionic vector potential

~ : quaternionic DAlembertian operator


(The bold notation represents a vector).
Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 25

Bibliography and references:


[1] J.C. Maxwell, A treatise on electricity & magnetism, N.Y., 1873. [2] Nikola Tesla, The True Wireless, Electrical Experimenter, May 1919. [3] Nikola Tesla, Experiments with alternate currents of very high frequency and their application to methods of artificial illumination, 1891. [4] Nikola Tesla, On light and other high frequency phenomena, delivered before the Franklin Institute, Philadelphia, February 1893. [5] Roberto Handwerker et al.,Rotazione di solidi mediante quaternioni(*), for Elements of informatics-Faculty of Engineering of Milan Polytechnic, Milan, 1990 (in italian) (*) [6] Arbab I.A. & Satti Z.A. On the generalised Maxwell equations and their prediction of electroscalar waves, Omdurman University, April 2009. [7] Steinmetz C.P., Electric waves, discharges etc. , N.Y., 1914 [8] W.R. Hamilton, Elements of quaternions, Chelsea, 1866. [9] Elihu Thomson, On a new connection for the induction coil, Franklin Institute of Philadelphia, Vol.LXI, n.6, July 1871. Smithsonian Institution, 1913. [10] G.F. Ignatiev & V.A. Leus, Instantaneous action at a distance in modern physics: pro and contra, Hauppage (N.Y.), 1990. [11] Roberto Handwerker, Tesla and cold electricity, videos on www.YouTube.com, Milan,2010. [12] N. Tesla, Nikola Tesla tells of new radio theories, Interview with N. Tesla in New York Herald Tribune, September 22, 1929 [13] J. Nasilowski: Phenomena connected with the disintegration of conductors, Przeglad Elektrotechniczny, 1961 (in polnish). [14] N.Tesla, On dissipation of electrical energy of the Hertz resonator, The Electrical Engineer, December 21, 1892. [15] N. Tesla, Famous scientific illusions, Electrical Experimenter, February 1919. [16] Prof. D. Mendeleev: An attempt towards a chemical conception of the ether (trans. from Russian by G. Kamensky (Imperial Mint, St. Petersburg), Longmans, Green & Co. N.Y.,1904. (*) English translation: Rotation of solids by quaternions

This publication, dedicated to Nucci & Karl, was issued on 03-03-2011

by:

DELTA Ingegneria

Dr. Eng. Roberto Handwerker Milan, Italy

- all rights reserved.

e-mail: info@deltaavalon.com web: www.deltaavalon.com


Roberto Handwerker. Longitudinal dielectric waves in a Tesla coil and quaternionic Maxwells equations. 26

You might also like