Professional Documents
Culture Documents
S H E E T
ADD A BATTERY
DUAL CIRCUIT SYSTEM
SIMPLIFIES SWITCHING AND AUTOMATES CHARGING OF TWO BATTERY BANKS
Inattention to proper selector switch position can result in the potentially dangerous situation of a dead starting battery. The ADD A BATTERY Dual Circuit System is as simple to operate as an ON/OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source. Dual Circuit Plus Battery Switch
Simplies switching Isolates engine and house circuits Combines batteries for emergency starting Tin-plated copper studs for maximum conductivity and corrosion resistance Blue Sea Systems one-piece terminal stud design never loosens over time
ADD A BATTERY
DUAL CIRCUIT SYSTEM
Specications
SI ACR 7610 Continuous Rating Maximum Cable Size Terminal Stud Size Maximum torque Relay Contact Position combine (30 sec.) (2min.) open low (10 sec.) (30 sec.) open high
Regulatory
E marked Meets ISO 8846, UL 1500, and SAE J1171 external ignition protection requirements 67 IP67Protected against immersion up to 1 meter for 30 minutes
12V 120A 1/0 AWG 3/8(M10) 140 in-lb 13.6 V 13.0 V 12.35 V 12.75 V 16.0 V
Easy operation Worry free Works with 12V or 24V systems Switch set to ON BATTERIES ISOLATED
Specications subject to change. See www.bluesea.com for additional information and specications.
6833 Rev.001
425 Sequoia Drive Bellingham, WA 98226 USA 800-222-7617 (USA and Canada) Phone: 360-738-8230 Fax: 360-734-4195 www.bluesea.com