Professional Documents
Culture Documents
established 1834
Henry Taylor Tools Ltd. The Forge, Peacock Estate, Livesey Street, Sheffield S6 2BL, England.
Tel: (0114) 234 0282 & 234 0321 Fax: (0114) 285 2015. E-mail: sales@henrytaylortools.co.uk Web Site: www.henrytaylortools.co.uk
In the furnace, after being tanged and bolstered, prior to drawing out to length.
The blade being drawn out to size and length under the spring hammer.
contents
WOODCARVING TOOLS
Amateur & Professional How to Order Cutting Edge Profiles Sculpture Tools Unshouldered Print & Blockcutters Cogelow Skew Gouges
Final blade shaping - willow twigs, a natural shock absorber, hold the punch. Wet grinding operations giving an individual profile to every blade.
2 3 4-5 6 6 7 7 8 9 10 10 11 11
Michael Painter Carving Tools Carving Tool Sets Selected Sets Micro Carving Tools Rifflers Woodcarver s Punches Accessories
12 12-13 13 14 14 14 15 15-19 19 20 21
Turning Scrapers Beading Tools Parting Tools H.S.S. Woodturning Tools Supertip 2000 Woodturning Tool Sets Hints on Sharpening
Straight Tools
These tools are straight along the length of the blade but vary from flat across the blade up through very shallow sections to deep V shapes.
Chisels
The first tools in the range are 2411 amateur and 3701 professional, which somewhat resemble an ordinary straight chisel but with rounded bevel on each side of the cutting edge. The second tools in the range are 2412 amateur and 3702 professional, which are the same as 2411 and 3701 except that the cutting edge is skewed to facilitate cutting into very sharp corners. Available in product numbers: Straight 3701 and 2411 Skew 3702 and 2412
Gouges
The first gouges listed are the 2413 and 3703 which exhibit a very shallow curve across the blade and so on to 2421 and 3711 which have a very deep U section. All of these tools with a curve or U across the blade are called gouges, they are the most used carving tools and are suitable for heavy stock removal with the wider tools having the advantage of not splitting the wood along the grain as would a flat chisel, or for cutting grooves or C cuts when used vertically. Gouges are available for both amateur and professional, up to 11/2" wide in the shallower sections and 11/2" wide in the medium and deeper shapes. Available in product numbers: 3703 to 3711 and 2413 to 2421 inc.
Parting Tools
These are straight tools exactly as the previous category. but are V shaped in section. Three different angles of V are available in both amateur and professional ranges up to 3/4" wide in the deepest V , 3/4" in the medium and 1" in the shallowest. Additionally the winged parting tool - a very shallow V with curved sides in the professional style only is available. and is used mainly for cutting V grooves, outlining letterwork etc. Available in product numbers: 3745, 3739, 3741, 2455, 2449, 2451 and 3747
Veiners
Veiners are deep narrow gouges which are used for fine lines, lettering, detail, etc. Available in product number 3748 up to 11/2".
How to order
Read the following text and quote: EXAMPLE: - Professional Ref 37 1. STYLE (Amateur or Professional) - Pau Marfin 2. TYPE OF HANDLE (Beech or Pau Marfin) - Straight Gouge 3. DESCRIPTION - 06 4. CUTTING EDGE SHAPE - 3/8" 5. SIZE Check individual tool shapes chart (centre spread) and ensure size required is available.
Fishtail Tools
These tools are longitudinally straight and have a straight shank which widens out progressively to the cutting edge resembling a fish s tail. Made only in the professional form, but the full range of straight and gouge sections up to 1". V s are not available. The particular benefit of these tools is that, mainly in the larger sizes, the shank does not interfere when cutting deeper areas in the carving and visibility is improved. Available in product numbers: 5001 to 5011 inclusive
Allongee Tools
Again somewhat similar to the fishtails and long pod tools except there is no parallel shank at all the cutting form tapering back to the bolster. These tools are very robust and have the advantage of good visibility around the tool and the ability to cut without damaging the foreground. Available only in the professional style and in the straight, shallow and medium gouge sections, but up to 2" wide. These are the tools for heavy work. Available in product numbers: 3791 to 3799 inclusive
Cutting Edge
Black outside Straw colour inside A quarter inch tool is 4 1/4" long from shoulder
AMATEUR TOOLS
Straw colour all over A half inch tool is 3 1/2" long from shoulder
PROFESSIONAL TOOLS
Black outside Straw colour inside A half inch tool is 4 3/4" long from shoulder
No.s for straight tools 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2455 2449 2451
No.s for No.s for spoon bent back tools bent tools 2431 2432 2433
R.H. CORNER L.H/ CORNER
No.s for No.s for spoon bent back tools bent tools 3721 3722 3723
R.H. CORNER L.H/ CORNER
No.s for long pod tools 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 -
No.s for allongee tools 3791 3792 3793 3794 3795 3796 3797 3798 3799 Available up to 2" (50mm)
5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5045 5039 5041
2422 2423 2424 2425 2426 2427 2428 2429 2430 2456 2450 2452
2434 2435 2436 2437 2438 2439 2440 2441 2455 2453 2454
3724 3725 3726 3727 3728 3729 3730 3731 3732 3743 3744
3704 3705 3706 3707 3708 3709 3710 3711 3745 3739 3741
3713 3714 3715 3716 3717 3718 3719 3720 3746 3740 3742
Profiles
2
1/16
3
1/8
5
3/16
6
1/4
10
3/8
13
1/2
16
5/8
20
3/4
22
7/8
26 1
30 11/16
32 11/4
38 mm 11/2 inch
CURVED
SPOON BENT
5mm 3/16"
6mm 1/4"
10mm 3/8"
13mm 1/2"
16mm 5/8"
3750 3752
No. 3780 Side Chisel
Sculpture Tools
These tools were created especially for sculptors who work in large sections of timber. They are beautifully balanced to handle heavy duty cuts as required and are fitted with heavy duty double hooped handles with shock absorbing leather washers.
Product Description Allongee Gouge Allongee Gouge Allongee Gouge Allongee Gouge Allongee Gouge Curved Gouge
Product Description Spoon Bit Gouge Straight Gouge Curved Gouge Allongee Chisel Straight V Parting Tool
SKEW GOUGES
A new generation of woodcarving tools
Fred Cogelow has gained a considerable reputation in North America over the last decade, having won more best of show awards in recent years than any other carver. Our first introduction to Fred was at the Davenport Congress in 1982 when his carving Hunts the Crying Bear won the Henry Taylor $5000 best of show award. Since that time we have maintained friendly and regular contact with him. Combining his years of experience and natural talent for woodcarving together with his broad knowledge of engineering, Fred has innovated a range of carving tools which offer the decreased resistance of the skew (the same principal as that of the guillotine) in combination with the control and contouring capabilities of the gouge. In addition, a variety of new bends and lengths allow greater accessibility and greatly improved ergonomic performance. The tools have been selected for production based on their individual merits and suitability to a wide variety of carving products and styles.
Available individually and in sets as detailed below. Set of 7 tools Comprising of: C1, C2, C7, C8, C13, C14, C17 Set of 10 tools Comprising of: C3, C4, C5, C6, C9, C10, C11, C12, C15, C16 Set of 17 tools Comprising of: C1-C17 inclusive Introductory Set Comprising of: C21, C22, C23, C24, C27, C28, C29, C32, C43
Standard Range
REF. No. C1 3/8" LH C2 3/8" RH C3 7/8" LH C4 7/8" RH LTH: 8" DES: SHALLOW LIFT C5 1/2" LH C6 1/2" RH LTH: 5 1/2" DES: EXTENDED SHORT BENT C7 3/8" LH C8 3/8" RH
LTH: 4 1/2" DES: OFFSET FOREBENT No.7
Introductory Set
SWEEP No.4 REF. No. C28 5/8" RH SWEEP No.7
LTH: 5 3/8" DES: GOUGE
No.9
C9 3/4" LH C10 5/8" RH LTH: 7 3/4" DES: STANDARD FOREBENT C11 7/8" LH C12 3/4" RH LTH: 7 1/2" DES: BACK BENT C13 1/2" LH C14 3/8" RH C15 3/4" LH C16 5/8" RH LTH: 7 3/4" DES: BACK BENT
No.3
No.3
No.2
No.39
C17 1/4" LTH: 4 1/4" DES: BENT SKEW Chisels are available with STANDARD FINISH - uniform black non-reflective finish except on the insides which have ground surfaces. ALL BRIGHT FINISH - bright ground all over. Chisels are supplied sharpened to the correct recommended cutting edge and require final honing only.
Michael Painter
Michael recommends two sets of three and six professional woodcarving tools for the beginner who needs an introduction to their first choice of Carving Tools. Both of these combinations will provide a variety of cuts for the small and medium sized projects together with the knowledge that they have chosen a good foundation for a growing tool kit.
6mm 10mm 3/16" 5mm 1/8" 3mm 3/8" 10mm 1/4" 6mm
3/8"
Straight chisel Skew chisel Straight gouge Straight gouge Straight gouge Straight gouge
Straight gouge Veining tool Bent tool Spoon bit chisel Spoon bit chisel Straight V tool
The make-up sets detailed below permit the Beginner or Starter Sets to be added to or converted into complete sets as desired:
Supersharp
Carving tools selected for delicate and detailed wood carving, linoleum & wood block cutting.
Selected Sets
Sets of tools consisting of 6, 9, 12 and 18 pieces are available with a choice of either professional or amateur styles. The tools can be purchased loose or in canvas rolls.
Skew Chisel 02
3/8
Straight Gouges 03
1/4
Curved Gouges 08
1/4
Parting Tool 39
1/4
04
5/16
05
3/8
06
1/2
06
3/4
07
3/8
09
1/8
10
3/16
11
1/32
13
1/4
15
1/8
21
3/16
27
3/8
Skew Chisel 12
1/4
Straight Gouges 14
3/16
Curved Gouges 17
1/16
Parting Tool 49
1/4
11
3/8
12
3/8
14
3/8
15
1/8
15
3/8
16
1/4
18
1/4
21
1/16
25
1/8
28
5/16
37
1/4
50
1/8
WOODCARVING TOOLS 3701 1/2" 3704 5/16" 3706 3/4" 3/8" 3/8" 3702 3705 3707 3/8" 1/4" 3703 3706 1/2" 3708 1/4"
BEECH MALLETS, SLIPSTONES, 1 large and 1 small and full sharpening instructions, carded.
Can be supplied in any sweeps up to 1/4" (6mm wide) All blades 80mm long Overall Length: 182mm
Rifflers
These much sought after items are available in various cross sections to facilitate cleaning up in awkward spots. All approximately 8" long, double ended and bastard cut for sculptors and marble workers. They are available singly or as a set of 8 in a plastic wallet (ref. PWB18). Single product numbers B1 to B8 inclusive.
B1
B5
B2
B6
B3
B7
B4 10
B8
Woodcarver's Punches
Where a textured surface or background treatment is required, the only real answer is found in our range of woodcarvers punches. The punch number must be prefixed by the product number. 6050, followed by the required punch number.
l0
11 12
13 14
15 16
17 18
19
20
21
22
23
24
25 26
27
28 29 30
31
32
33 34
35 36
37 38
39
40 41
Accessories
Adzes These tools have been developed following extensive research and study into the many traditional styles and museum pieces available. They are intended for single handed use and remove wood at a fantastic rate - ideal for roughing out, particularly on large carvings. The two patterns are identical except that one has a blade with a straight cutting edge whereas the other is a gouge adze which is curved across the blade. In each case: Handle (shaft) length: 10 1/2" (25cms) blade length: 7" (17.5cms) width of blade: 2" (5cms) weight: 2lbs (0.91kg) Mallets Traditionally wood carving mallets are always of wood and with a round head, giving the excellence of balance required for continuous use without undue fatigue and offering a large working surface to reduce wear. Only wooden mallets should be used with carving tools. Mallets have ash handles and a 3 1/2" Beech head. Chip Knives
Essential equipment for whittling but also indispensable for all carving whether for stop cutting or fine detail. These fine quality Knives are also ideal for cutting mounts for photos or artwork. Product numbers: 6019 curved blade, 6014 straight blade.
Slipstones
For sharpening, available in two sizes: Large - 4 1/2" x 1 3/4" x 1/2" x 3/16" Small - 2 1/4" x 7/8" x 3/16" x 1/16"
127 - 3/8"
1/2"
129 - 3/4"
7/8"
131 - 1 1/4"
11
AN INTRODUCTION TO
HSS Steel
The Craftsman Woodturner a complete guide to using all woodturning tools. Obtained from bookshops or from Peter Child. The Old Hyde, Little Yeldham, Halstead, Essex CO9 4QT.
Gouges
12
Square End Chisels MT4 HS8 H186 H187 HS21 H187 1" 1 1/4" HS22 HS9 H187 H188 Size Prod. Ref. Handle
1/2" HS23 H187 3/4" HS24 H187
Chisels are used for convex, conical and cylindrical features in spindle turning, they are also used for cleaning up end grain and vee cuts. Oval section skews are easier to use and offer enhanced sensitivity and precise handling, they are more stable on the rest and less prone to dig-ins . Standard skews are stronger and heavier and less prone to vibration. Square end chisels are the traditional choice for planning cuts on cylinders and tapered forms. Used correctly they give a wonderful finish even on difficult wood. Planning cuts can also be done with a skew chisel.
Long & Strong T3 H173 1" T4 H173 1 1/4" T5 H174 Size Prod. Ref. Handle
1/4" T20 H172 1/2" 3/4" T21 T22 H173 H173
T1 H172
T2 H172
Long & Strong 1" T9 H173 1 1/4" T10 H174 Size Prod. Ref. Handle
1/4" T64 H172 1/2" T26 H173 3/4" 1" 1 1/4" T27 T28 T29 H173 H173 H174
T6 H172
T7 H172
T8 H173
Carbon Steel Extra Heavy Long & Strong 1 1/2" T47 H177
T50 H172
13
Scrapers
Square End Scrapers
For finishing flat surfaces e.g. wine table top or convex surfaces and the outside of bowls. Also for hollowing and finishing flat bottom holes in chuck work e.g. turned containers.
High Speed Steel Size Prod. Ref. Handle
1/4" HS37 H186 1/2" HS28 H187 3/4" HS29 H187
Beading Tools
For forming beads, rounding off or cleaning up the ends of cylinders, forming short straight sections, cutting straight bottom notches, turning spigots and for vee cuts.
High Speed Steel Size Prod. Ref. Handle
1/4" HS11 H186 3/8" HS12 H187
14
Parting Tools
Parting tools are for cutting deep grooves and for separating finished work from the waste. NB. Fluted parting tools should be used flute down on the rest. Sharpen by grinding the bevel only and maintaining the 45 bevel angle.
1/2"
3/8" 1/2
" 5/8"
1"
Detail Gouge
Designed for detail work primarily on spindle work, the shallow flute and heavy cross section make it stable and easy to control. Ground with a "fingernail" grind. Useable blade length 7".
HS138
1/2"
Shallow Gouge
For roughing down stock or turning large spindles. Designed by Rude Osolnik. Useable blade length 9". HS152 1 3/4"
Ellsworth Gouge
This tool was developed in conjunction with David Ellsworth well known U.S. woodturner. It is made from 16mm round bar with a 7 1/2" flute. The special feature of this gouge is a side grind which enables roughing, and fine cuts can be achieved on bowls. HS165
1/2"
15
HS150 HS151
1" LH 1" RH
HS145 HS146
3/4" 1 1/2"
Dovetail Scraper
This tool is specially designed for making accurate recesses to accommodate the jaws of an expanding dovetail chuck.
HS163
1/2"
Beading Tools
These tools will produce beads quickly and consistently and are wonderful for small detail in dense, close grained woods, plastics, bone, etc. They are sharpened by grinding or honing the bevelled edge, and can be used until the flute is gone. Unhandled. Useable blade length 5" HS140 HS141 HS142
5/16"
5/16"
Square Stock for l/16" Bead Square Stock for l/8" Bead 5/16" x 1/2" Stock for 3/16" Bead
HS143 HS144
5/16" 3/8"
x 1/2" Stock for 1/4" Bead x 1/2" Stock for 5/16" Bead
Coving Tool
This tool makes it possible to cut coves with speed and consistency. The shearing cut produces a smooth surface and the flat bevel is easy to sharpen. Can make many sizes of coves. Useable blade length 7" HS139
3/8"
Pyramid Tool
This unique multi purpose tool is ideal for beginners and experienced woodturners alike. When used as a skew the problems of digging are greatly reduced. Suitable for both spindle and face plate. Able to cut beads and shoulders. HS166
HS 164
16
Mini Sq. End Scraper Mini Skew Chisel Mini Oval Skew Chisel Mini Sq. End Scraper Mini Parting Tool
Mini Rd. Nose Scraper Mini Side Scraper 5/32" Mini Gouge 13/64" Mini Gouge
HS125 HS126
Overall Handle Length Length 341/2" 311/2" 341/2" 36" 331/2" 24" 24" 24" 24" 24"
Description Raffan Curved Scraper 10" Blade Skew Chisel 10" Blade Rd. Nose Scraper 10" Blade Hollowing Tool Rd. Bar 12" Blade
Overall Handle Length Length 34" 341/2" 34" 351/2" 24" 24" 24" 24"
17
1. Designed by Richard Raffan. Richard began woodturning in 1970 and can be described as one of the world s foremost authorities on this craft. Drawing on his vast experience Richard has designed a range of tools which are produced from heavy section materials, with particular attention given to the curved cutting edge shapes. The tools are safe to use because the thick material does not flex thus reducing the chance of catches. The curved cutting edges are less prone to catches and much enhance the versatility and controlled performance of the tools.
Raffan books and videos describing and demonstrating his techniques and tool section are available world wide. Bowl Scrapers Size Ref. Handle
3
Curved Skews 1 1/4" x 3/8" HS67 H188 1" x 3/8" HS83 H187
1
Side Scraper
3
2. Designed by Rude Osolnik. Mr. Woodturner in America", Rude Osolnik has been involved in all aspects of woodturning for nearly 50 years. As a result of his teaching workshops around the U.S.A., there is an increasing demand for the innovative tools which Rude designed and made for his own use.
Ref. HS70 HS71 HS72 Description No.2 Flat Gouge No.3 Flat Gouge No.4 Flat Gouge Handle H187 H187 H187 Size
1/2" 5/8" 3/4"
Size
5/8" 1/2" 5/8"
3a. Parting Tool developed by Kip Christensen. This narrow parting tool is ideal for working with the hard dense woods used in boxes and tops. It produces a shearing cut and a flat smooth surface. 3b. Beading Tools re-introduced by Dale Nish. These traditional tools overcome the problems of forming precise and consistent beads on small boxes, bases etc. The top of the tool only should be honed to preserve the shape.
Beading Tools Size Prod. Ref. Handle
1/4"
5/16"
1/2"
4. Euro - Set. A set of high speed steel turning tools designed by Rudolph Dercks to meet the special requirements of woodturners in Europe. 4.
Ref. HS86 HS87 HS88 HS89 Description Euro Turning Gouge Forged Bar Euro Turning Gouge Forged Bar Euro Turning Gouge Forged Bar Euro Roughing Out Gouge Size Ref.
3/8" 1/2" 3/4"
Description HS90 HS91 HS92 HS93 Euro Roughing Out Gouge Euro Chisel Skew End Euro Parting Tool Euro Round Sided Cutting Scrape
1"
5.
5. H.S.S. Turning Tools by Ray Key. - 3/8" & 1/2" H.S.S. Modified Spindle Gouges. Used mainly for making boxes, from hard dense end grain material. Internal hollowing from the centre is made easy with the short stubby 60/65 angle, this allows for a strong vibration free pivot cutting action, as the bevel can be rubbed for much of the time. For outside shaping the long side grind is used with the bevel rubbing, the tool is pulled along the material. Quality of surface obtained is the equivalent of a skew chisel, but is much better than a skew on difficult woods. This tool is also used for refined shaping of the outside of small bowls. Used correctly the bevel rubs with a slicing cut action and leaves a very clean tool finish, no scraping is required. End grain hollowing on softer woods and larger work is best done with the 1/2" gouge. The end/side cutting scraper is made from a 3/4" square end scraper. This is used to true up gouge ripples in the base of flat bottomed boxes and to true up the side walls. The 1/2" skew is one that has a much longer angle than normal, it is used more like a sheer scraper on end grain and for cutting the dovetail undercut on bowls and platters required by many of todays chucks. The 3/4" round side scraper is used for the truing up of gouge ripples in the base of soft curved boxes, goblets, egg cups etc. The modified straight across the grind make it much easier to remove the nipple or pimple often found in such items when the rounded end ones are used.
Ref. HS102 HS103 HS104 Description R. Key Skew Chisel R. Key Round Side Cutting Scraper R. Key Square End/Side Cutting Scraper Size 1/2" 3/4" 3/4" Ref. HS105 HS106 Description R.Key Spindle Gouge R. Key Spindle Gouge Size 3/8" 1/2"
6. 6. Miniature Set by Bonnie Klein. This miniature set of eight tools was designed by Bonnie Klein of U.S.A. for miniature turning such as goblets, tops, tagua nuts and jewellery.
Ref. HS94 HS95 HS96 HS97 Description Gouge Gouge Gouge Gouge Size
5/32" 13/64" 1/4" 5/16"
Description Parting Tool Skew Chisel Radius Scraper Square End Scraper
Size
3/32" 3/8" 3/8" 3/8"
18
C B
Supertip 000
The ultimate bowl turning & hollowing tool
MANY TIPS AVAILABLE - all are made from 16mm round bar M2 HSS
Tips can be freely interchanged or replaced when worn. Tool stays virtually its full length in use. Shank is stronger
and more rigid than a conventional gouge. Shank cannot snap. Extra long shanks available.
This works like a ring tool but has superior clearance for shavings and - because it has a smaller working radius is much easier to control. Gives an excellent finish and can hollow into deep and awkward places where a ring tool could not reach. Also good for deep straight sided hollows. It has two cutting edges with different bevel angles.
* Starter kit consists of 300mm long x 16mm round bar holder fitted with a 300mm long handle with two tips of your choice.
19
Square End Chisel Skew Chisel Gouge Round Nose Scraper Parting Tool
x 1/8"
High Speed Steel HSDM Set of Five (Loose) 4 mm 6 mm 9 mm 13 mm 13 mm Gouge Gouge Gouge Skew Chisel Parting Tool
Carbon Steel Standard Merchandiser Ref T2 T5 T13 T32 T34 T37 T44 T48 Description Skew Chisel Skew Chisel Square End Scraper Gouge Gouge Roughing Gouge L & S Deep Fluting Gouge Parting Tool Size 1/2" 1 1/4" 1" 1/4" 1/2" 3/4" 3/8" 1/4"
High Speed Steel Merchandiser Ref HS3 HS5 HS7 HS8 HS9 HS13 HS30 HS40 Description Deep Fluting Gouge Gouge Gouge Skew Chisel Skew Chisel Parting Tool Square End Scraper L & S Deep Flute Gouge Size 3/4" 1/4" 1/2" 1/2" 1 1/4" 3/4" x 1/8" 1" 3/8"
20
Woodworking Chisels
Cranked Paring Gouges. Long narrow blades with cranked neck, allowing the chisel blade to be used flat on work surface. Cutting edge ground on inside giving an outside cut. Blade about 8" long. F1 1/4" x 1/4" F2 1/2" x 5/8" F3 3/4" x 7/8" F4 1" x 1 1/4" F5 1 1/2" x 1 3/4" Incannel Paring Gouges. Long narrow blades used for deep section profiles, or precisely controlled fluting. Blade about 8" long. F6 1/4" x 1/4" F7 1/2" x 5/8" F8 3/4" x 7/8" F9 1" x 1 1/4" F10 1 1/4" x 6" Incannel and Outcannel Firmer Gouges. Standard length carpenters chisels with gouge shaped blades. Incannel gouges are ground inside giving an outside cutting edge. Outcannel gouges are ground outside giving an inside cutting edge. Blade about 4" long. Incannel Gouges - F11 1/4" F12 3/8" F13 1/2" F14 5/8" F15 3/4" F16 1" Outcannel Gouges - F17 1/4" F18 3/4" F19 1/2" F20 5/8" F21 3/4" F22 1" Registered Mortice Chisel. A specialist chisel designed for chiselling mortices but which can also be used for heavy duty work. Blade about 4 1/2" long. F23 1/4" F24 1/2" F25 3/4" F26 1" Cranked Bevel Edge Paring Chisels. The bent, or cranked neck design of these special paring chisels allows the craftsman to use the chisel with the blade absolutely flat on the stock at all times. Blade about 8 3/4" long. F27 1/4" F28 1/2" F29 3/4" F30 1" F31 1 1/4" Long Thin Bevel Edge Paring Chisels. These chisels with relatively thin blades taper towards the cutting edge. Blade about 8 3/4" long. F32 1/4" F33 1/2" F34 3/4" F35 1" F36 1 1/4" Bevel Edge Socket Chisels. The strength of the blade and socket forging is unequalled for paring and prying. Leather tipped ash handle. Blade about 7 1/4" long. F37 1/4" F38 3/8" F39 1/2" F40 5/8" F41 3/4" F42 1" F43 1 1/2" Heavy Duty Socket Firmer Chisel. These chisels have a thicker and longer socket than our bevel edge model for added strength and durability. Blade about 8" long. F44 1/2" F45 3/4" F46 1" F47 1 1/2" F48 2" Offset Sockets. These heavy duty offset socket chisels are used for getting into awkward corners which you cannot reach with straight chisels. F65 1/2" F66 3/4" F67 1" F68 1 1/2" F69 2" Short Cranks. These shorter 41/2" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier. F61 1/4" F62 1/2" F63 3/4" F64 1" Swan Necks. A swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck. The 1/4" size can be used to clean other sizes of mortices. Also available in sizes 5/16" & 3/8". F70 1/4" F71 5/16" F72 3/8"
21