Professional Documents
Culture Documents
A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any Exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Skills Exam, you will: configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN
Addressing Table
Device Interface Fa0/0.10 Fa0/0.20 Router1 Fa0/0.43 Fa0/0.67 Internet WRS Wireless SW DS1 SW AC2 SW AC3 PC1 PC2 PC3 PC4 VLAN 43 VLAN 43 VLAN 43 NIC NIC NIC NIC 172.16.100.1 172.16.43.11 172.16.43.12 172.16.43.13 172.16.10.10 172.16.20.10 172.16.10.11 DHCP assigned 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 n/a 172.16.43.1 172.16.43.1 172.16.43.1 172.16.10.1 172.16.20.1 172.16.10.1 172.16.100.1 172.16.43.1 172.16.67.1 172.16.67.10 255.255.255.0 255.255.255.0 255.255.255.0 n/a n/a 172.16.67.1 Address 172.16.10.1 172.16.20.1 Subnet Mask 255.255.255.0 255.255.255.0 Default Gateway n/a n/a
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Switch>enable Switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#hostname SW AC2 SW AC2(config)#
The privileged EXEC mode uses the following encrypted password: class
Enable Telnet and console line login using the following password: cisco
SW AC2(config-line)#password cisco SW AC2(config-line)#exit Configure the banner message-of-the-day as Authorized access only!
SW AC2(config)#banner motd # Enter TEXT message. End with the character # . Authorized access only!# SW AC2(config)#
b.
To configure the switches for remote management access, create and enable interface VLAN 43 on all three switches.
SW DS1(config)#interface vlan 43 SW DS1(config-if)#ip address 172.16.43.11 255.255.255.0 SW DS1(config-if)#no shutdown SW DS1(config-if)#exit SW DS1(config)#ip default-gateway 172.16.43.1
SW AC2(config)#interface vlan 43 SW AC2(config-if)#ip address 172.16.43.12 255.255.255.0 SW AC2(config-if)#no shutdown SW AC2(config-if)#exit SW AC2(config)#ip default-gateway 172.16.43.1
SW AC3(config)#interface vlan 43 SW AC3(config-if)#ip address 172.16.43.13 255.255.255.0 SW AC3(config-if)#no shutdown SW AC3(config-if)#exit SW AC3(config)#ip default-gateway 172.16.43.1 SW AC3(config)#
SW AC2(config-if-range)#end SW AC3(config)#interface range fastEthernet 0/19-24 SW AC3(config-if-range)#switchport mode trunk SW AC3(config-if-range)#switchport trunk native vlan 43 SW AC3(config-if-range)#no shutdown SW AC3(config-if-range)#end
SW DS1(config)#vtp mode server Setting device to VTP SERVER mode. SW DS1(config)#vtp domain CCNA Changing VTP domain name from NULL to CCNA SW DS1(config)#vtp password cisco Setting device VLAN database password to cisco
b.
Create and name the following VLANs on SW DS1. VLAN 10: Student VLAN 20: Faculty VLAN 43: Management VLAN 67: Wireless
SW DS1(config)#vlan 10 SW DS1(config-vlan)#name Student SW DS1(config-vlan)#vlan 20 SW DS1(config-vlan)#name Faculty SW DS1(config-vlan)#vlan 43 SW DS1(config-vlan)#name Management SW DS1(config-vlan)#vlan 67 SW DS1(config-vlan)#name Wireless SW DS1(config-vlan)#end
c.
Step 2: Configure SW AC2 and SW AC3 as VTP clients to participate in the CCNA VTP domain.
SW AC2(config)#vtp mode client Setting device to VTP CLIENT mode. SW AC2(config)#vtp domain CCNA Domain name already set to CCNA. SW AC2(config)#vtp password cisco
SW AC3(config)#vtp mode client Setting device to VTP CLIENT mode. SW AC3(config)#vtp domain CCNA Domain name already set to CCNA. SW AC3(config)#vtp password cisco Setting device VLAN database password to cisco SW AC3(config)#end
d.
SW AC2#show vtp status SW AC3#show vtp status or SW AC2#show vlan brief SW AC3#show vlan brief
Step 1: Configure access ports on access layer switches. Configure the appropriate interfaces on SW AC2 and SW AC3 for static access. Assign VLANs according to the port assignments table.
SW AC2(config)#interface range fastEthernet 0/1-17 SW AC2(config-if-range)#switchport mode trunk SW AC2(config-if-range)#no shutdown SW AC2(config-if-range)#exit
SW AC2(config)#interface range fastEthernet 0/1-10 SW AC2(config-if-range)#switchport access vlan 10 SW AC2(config-if-range)#no shutdown SW AC2(config-if-range)#exit
SW AC2(config)#interface range fastEthernet 0/11-17 SW AC2(config-if-range)#switchport access vlan 20 SW AC2(config-if-range)#no shutdown SW AC2(config-if-range)#exit --------------------------------------------------- -
SW AC3(config)#interface range fastEthernet 0/1-18 SW AC3(config-if-range)#switchport mode trunk SW AC3(config-if-range)#no shutdown SW AC3(config-if-range)#exit
SW AC3(config)#interface range fastEthernet 0/1-10 SW AC3(config-if-range)#switchport access vlan 10 SW AC3(config-if-range)#no shutdown SW AC3(config-if-range)#exit
SW AC3(config)#interface range fastEthernet 0/11-17 SW AC3(config-if-range)#switchport access vlan 20 SW AC3(config-if-range)#no shutdown SW AC3(config-if-range)#exit
b.
SW DS1(config)#spanning-tree vlan 1 priority 4096 SW DS1(config)#spanning-tree vlan 10 priority 4096 SW DS1(config)#spanning-tree vlan 20 priority 4096 SW DS1(config)#spanning-tree vlan 43 priority 4096 SW DS1(config)#spanning-tree vlan 67 priority 4096
Using a priority of 8192, set SW AC2 as the backup root bridge for all VLANs.
SW AC2(config)#spanning-tree vlan 1 priority 8192 SW AC2(config)#spanning-tree vlan 10 priority 8192 SW AC2(config)#spanning-tree vlan 20 priority 8192 SW AC2(config)#spanning-tree vlan 43 priority 8192 SW AC2(config)#spanning-tree vlan 67 priority 8192
b.
SW AC3(config-if)#switchport port-security maximum 2 SW AC3(config-if)#switchport port-security mac-address sticky SW AC3(config-if)#switchport port-security violation shutdown SW AC3(config-if)#exit
b.
b.
c.
d.
Configure PC4 to access the wireless network that is provided by WRS. PC4 uses DHCP to obtain addressing information. Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.
DS1 can ping Router1. AC2 can ping Router1. AC3 can ping Router1. can ping PC2. can ping PC3. can ping PC1.
version 1.0 Created in Packet Tracer 5.2.1 and Marvel 1.0.1 All contents are Copyright 1992 - 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.