Professional Documents
Culture Documents
December 2012
SESSION 2012-2013
Mr S S Rathore, FIE, President Dr K Venkatasubbaiah, Chairman Council Members Mr Chandrakant Raipat Mr K C Sethi
Technical Editors Dr A K Gupta Mr Alok Basu
Prof (Dr) D L Shah Mr Sreekantha G Mr Umasankar J Maj Gen R K Sanan, VSM (Retd) Ex-Officio
Members-Elected Mr Shoukkathali P Mr Bhola Nath Karmarkar Mr Syed Mishal P N
CONTENTS
Contingent Irrigation Management in Rainfed Areas N D Korpe, Former Technician Member Examination Re- registration after Expiry of Six Years in Winter 2012 Examination Premature Re-registration for Examination Presentation of Trophies, Prizes and Awards at the Twentieth IEI Convocation Presentation of NDRF Awards at the Twentieth IEI Convocation Report on Twentieth IEI Convocation and Technicians/Students Convention Application Format for Examination Re-registration / Premature Re-registration News from IEI Technicians Chapters Programme of Summer 2013 Examination IEI Examination Centres Revised Proforma for Registration of Section B Re-conduct of Section B Examination in Architectural Engineering 6 6 7 8 9 12 13 15 18 20 21 3
and its untimely distribution, which results in the rapid depletion of water-table of the area, the people of India are facing an unprecedented water crisis. With a view to save the standing orchards and gardens, following areas ought to be implemented: Removal of Cracks from Soil Surface: The residual moisture from the soil escapes from cracks in the soil to the environment. To retain the moisture in the soil, it is necessary to cover up the cracks formed in the soil during cultivation and tillage practices. Protection from Hot Winds: Wind brakes are to be erected from available material to stop the flow of hot winds from southern and western sides of the fields. As such the plants are protected from ill-effects of hot winds and water requirement of the crop is lowered down. Constant Mulching: If some amount of agro-based residues, such as, straws, leaves and harvest residue are spread over the area to be watered/irrigated permanently, then the evaporation of water as well as that of soil moisture is directly controlled. Training and Pruning of Trees: On pruning of trees, there is reduction in the number of leaves as also of the surface area exposed and this situation leads automatically to reduction in the amount of water vapour lost to the environment. As the rate of evaporation is controlled, the water requirement is also consequently reduced. Scheduling Irrigation at Evening Time: There is reduction in evapo-transpiration when plants are irrigated at evening time. The water so given is easily assimilated, absorbed and collected by the sub-soil during night time. Irrigation during night time provides a conducive atmosphere for growth of plants. Moisture Level at Soil Field Capacity: The roots of plants along with micro-organisms need constant aeration. Thus, saturation of water near the trees should not occur under
any circumstances. If the moisture in the soil is maintained at field capacity level, there is good growth of plants which are pest and disease-resistant and these results in high quality yields. Irrigation not too Close to the Trunk of Trees: The roots of trees absorb water around the circumference of the roots and this extends generally up to the shadow which falls when the sun is directly overhead the tree, ie, at noon. The range of circumference is around two metre. Over and above this range, the water is sucked up even more efficiently. As far as possible, watering should be done in between two rows by means of a single channel. The absorbed water can be attracted by the roots of plants from a distance of up to two metre. Irrigation at Half Furrow Level: Instead of irrigation through big basins either a small basin or half filled alternate furrow save the plants in chronic situation. Also, this minimum exposure of water to the environment will automatically reduce evaporation and will serve to increase utility of resources available. Irrigation through Alternate Furrows: Keeping in view the storage of water and to provide the essential amount of water required to keep the plants alive, water should be applied through alternate furrows. This will serve to maximize the area under irrigation. Conveyance through Pipes: When water is conveyed through open channels, there is loss of water through evaporation and deep percolation. Therefore, wherever possible, water should be conveyed through closed conduits. Gated Pipe and Valve Arrangement: The flow of water in pipes should be regulated through means of valves or gates so as to ensure optimum supply of water at appropriate place and avoid wastage. Micro or Drip Irrigation: Keeping in mind the shortage of water, the irrigation should be scheduled at an interval of 2-3 days through drip irrigation. The irrigation is to be done
at the evening time to maximize water application efficiency. Semi-portable Drip Irrigation: If the area to be irrigated is big and the irrigation sets are limited in number, then the main high density polyethylene (HDPE) pipe is to be used as sub-mains along with the laterals and is to be shifted as a whole from place to place as per convenience so as to irrigate the whole of the area3. Sprinkler Irrigation: The sprinkler is ideal for irrigation for nurseries and orchards where the distance between plants as well as rows is less. The irrigation is to be done when there is no winds and after sunset4. CONCLUSION The improved methodology suggested helps the grower as contingent irrigation scheduling for survival of the orchard as well as for timely fruiting and development of quality fruits during stress period if the rainfall received in the area is deficient and its distribution is improper. Thus, sustainable horticulture can be suitably developed in rainfed conditions in the Vidarbha region of the state of Maharashtra. REFERENCES 1. A M Bathikhi and A H Abu Hammad. Comparison between Efficiencies of Surface and Pressurised Irrigation System in Jardon Irrigation and Drainage System. vol 19, no 2, 1980, p 109. 2. I Vermeiren and G A Jobling. Localized Irrigation, Irrigation and Drainage Paper. FAO, 1980, Rome, p 34. 3. Vikas Kumar and Poonam Kumari. Development of Semiportable Multi-irrigation System. B Tech Thesis, P D K V, 2005, Akola. 4. I M Khan. Comparison of Sprinkler and Surface Irrigation Method on Cumulative Pan Evaporation. M Tech Thesis, P D K V, 1986, Akola. 5. S S Hiwase. Proceedings of Technologies for Sustainable Horticulture in Rainfed Areas. Dr Panjabrao Deshmukh Krishi Vidyapeeth, 2005, Akola.
IMPLEMENTATION OF IVRS AT IEI HQS In order to give better and prompt service to our T/ST and other members, the Institution has implemented Interactive Voice Response System (IVRS) at its Headquarters. Existing T/ST/Corporate members of the Institution interested to know the roll number/examination results/ payment details or any other queries related to Examination/Membership may dial the number 033 4015 5400. Members are to key-in 7 digit membership number and first 11 digits of the reference number received through sms or letter from IEI (as applicable) and follow the instruction as sounded by the system.
IEI Journal-TC
* Revision of Examination Fee, from US $ 120 to US $ 150, for overseas candidates is effective from Winter 2011 Examination.
T 154601- 9
ST 540330- 3
T 154453- 9
T 154526- 8
T 154571- 3
ST 420726- 8
ST 498458- 2
ST 516671- 9
ST 462278- 8
Mr Mahesh Kumar Soni Highest (Chemical Engineering) Section B Institution Prize- S11
Ms Madhusmita Samantaray Highest (Elec & Commn Engineering) Section A (Non-Diploma) Suman Sharma Award- W11
ST 396483- 9
ST 420784- 5
Mr Shahu Ashish Kumar Mithailal Highest (Mat & Metallurgical Engineering) Section A (Diploma) Suman Sharma Award- W11
Mr Sujeet Bharti Highest (Mining Engineering) Section A (Diploma) Suman Sharma Award- W11
ST 313989- 7
ST 155962- 5
ST 155055- 5
ST 456171- 1
Mr Sailesh V Mapuskar Highest (Textile Engineering) Section A (Diploma) Suman Sharma Award- W11
Ms Ranjitha Raj P Highest (Chemical Engineering) Section A (Diploma) Suman Sharma Award- W11
ST 363237- 2
T 150900- 8
ST 475785- 3
ST 545748- 9
ST 563425- 9
ST 549210- 1
ST 368434- 8
T 152191- 1
AEROSPACE ENGINEERING
Bronze Medal VIT, Vellore, TN
AEROSPACE ENGINEERING
AGRICULTURAL ENGINEERING
VIT, Vellore, TN Gold Medal Silver Medal
AGRICULTURAL ENGINEERING
AGRICULTURAL ENGINEERING
Bronze Medal
Bronze Medal
Gold Medal
Seby Antony
Aswini A
Aditya Venkatesh
ELECTRONICS & TELECOM. ELECTRONICS & TELECOM. ELECTRONICS & TELECOM. ENGINEERING ENGINEERING ENGINEERING
Muthayammal Engg.College Namakhal, TN Sri Siddartha Inst. of Tech Tumkur, Karnataka Sri Shakthi Inst of Engg & Tech, Coimbatore, TN Vitam College of Engg Visakhapatnam, AP Bronze Medal Gold Medal Silver Medal Gold Medal
Sree Vidyani Kethan Engg College, Chittoot, AP Velammal College of Engg & Tech, Madurai, TN
Silver Medal
Prasant Tripathi
Ankan Guria
Peddinti Ramcharan
P Karthik
In addition to all above awardees, a host of Technicians/Senior Technicians were also honoured, the details of which are given here, during the Twentieth IEI Convocation held at Bengaluru on November 04, 2012. Mr Jineesh Shoukath V P (S11), Second Highest Marks [Section A (Non-diploma), Institution Prize] and S N Ghosh Memorial Prize; Mr Perumalla V Sai Gowtham (S11), Second Highest Marks [Section A (Diploma), Institution Prize]; Ms Bijila K K, Ms Akhila E S and Ms Jasly G S (S11), jointly Third Highest Marks, Suman Sharma Award [Section A, (Diploma)]; Ms Asha Sreedharan (S11), Highest Marks in Computer Science and Engineering [Section B, Institution Prize]; Mr Alok Anusha R Kumar Panda (S11), Highest Marks in Electrical Engineering [Section B, Institution Prize]; Mr Ebin P S (S11), Highest Marks in Mechanical Engineering [Section B, Institution Prize]; Mr Shinoj K (S11), Highest Marks in Production Engineering [Section B, Institution Prize];Mr Mithun Kumar T P (S11), Highest Marks in Civil Engineering [Section B and Bhupesh Nandi and Rekha Nandi Award]; Ms Hasna V A (W11), Highest Marks [Section A (Non-Diploma), Institution Prize] and Suman Sharma Award; Mr Ashis Sharma (W11), Highest Marks [Section A (Diploma), Institution Prize]; Mr Nand Kishor Gupta (W11), Second Highest Marks [Section A (Diploma), Institution Prize]; Ms Sunayane Subodh Gharat (W11), Highest Marks [Section A (Diploma), Suman Sharma Award]; Ms Sworna Prava Das (W11), Second Highest Marks [Section A (Diploma), Suman Sharma Award]; Mr Gopa Kumar N G (W11), Highest Marks in Computer Science and Engineering [Section B, Institution Prize]; Mr Pramod Kumar Padhy (W11), Highest Marks in Electrical Engineering [Section B, Institution Prize]; Ms Reshma K R (W11), Highest Marks in Electronics and Communication Engineering [Section B, Institution Prize]; Mr Sabyasachi Mohanty (W11), Highest Marks in Materials and Metallurgical Engineering [Section B, Institution Prize]; Mr Rohit Sudhir Patankar (W11), Highest Marks in Production Engineering [Section B, Institution Prize];Ms Kalaiselvi D (W11), Highest Marks in Textile Engineering [Section B, Institution Prize]; Mr Pradip Roy (S11), Highest Marks in Quality Engineering and Management (PGDM) (Glasgow Auld Students Award).
IEI Journal-TC
The inaugural lamp being lit by the Governor to mark the inauguration of the Convocation
The Chief Guest then presented the Institution Trophy to the Nashik Technicians' Chapter as Second Best Technicians' Chapter amongst all the Technicians' Chapters of IEI for the year 2011-12. The Chief Guest also presented Dr Amitabha Bhattacharyya Memorial Trophies to Mepco Schlenk Engineering College (Department of Electrical and Electronics Engineering), Sivakasi (Tamilnadu); Sri Krishna College of Technology (Department of Mechanical
The Convocation was held at Jnana Jyoti Auditorium in Bangalore University, Bengaluru, where Mr Hans Raj Bhardwaj, Governor of Karnataka, was the Chief Guest. Addressing the gathering, Mr Bhardwaj said Engineers have to strive for achieving high quality in their chosen fields of engineering. Calling upon young engineers to dedicate themselves in the progress of the country, the Governor quoted the example of various works undertaken by the National Highway Authority of India and the State Government in upgrading motorable roads. He paid rich tributes to the brilliance of renowned engineer, Sir M Visvesvaraya, and his great achievements. Referring to bridges that collapsed recently in Mumbai, Goa and Punjab, the Governor said, "It is not ethical on the part of engineers to compromise on quality. In an age when the service industry is prominent, Indian products have to be equal or better than the best". He made a fervent appeal to all pass-out students and also to other engineering professionals, who attended the Convocation, to put their best technical inputs selflessly for the growth of engineering skills in the country. He opined that, with the addition of such technical inputs by the young
The Second Best Technicians' Chapter Award being presented to the representative of the Nashik Technicians' Chapter by the Governor of Karnataka
Engineering), Coimbatore (Tamilnadu); and Shrinathji Institute of Technology and Engineering (Department of Electronics and Communication Engineering), Nathdwara (Rajasthan) as the Best, Second Best and Third Best Engineering College Students' Chapter, respectively. He also presented Dr Amitabha Bhattacharyya Memorial Trophies to PAC Ramaswamy Raja Polytechnic College, Coimbatore
(Tamilnadu); Government Polytechnic, Nashik (Maharashtra) and Periyar Centenary Polytechnic College, Thanjavur (Tamilnadu) as the Best, Second Best and Third Best Polytechnic Students' Chapter, respectively. Dr H Maheshappa, Vice-chancellor of Visvesvaraya Technological University was the Guest-of-Honour on the occasion. While delivering his thought-provoking Convocation Address, Dr H Maheshappa congratulated the Institution for providing an alternative and cheaper mode of technical education to weaker sections of the society, who was otherwise not getting the opportunity to the formal education system. He felt that the active support of academicians, researchers and education planners of this country could
provide a sustainable road map of Indian education in the long-run.Dr Maheshappa made a fervent plea to students to be innovative in their own fields of education and put their best in the form of knowledge-sharing in their professional arena so that a sense of technical belongingness prevail in the homogeneous society, which would ultimately unfold a greater horizon of technological superiority over other developing countries, thereby India could progress much faster in the frontier areas of energy, education, manufacturing and social empowerment. Dr H Maheshappa also emphasized the need to inculcate professional ethics among engineering students. He also spoke about the need for a multidisciplinary approach to the engineering syllabi so as to render students 'industry-ready'. He called upon the engineering Institutions to ensure engineering education that translates into the betterment of human lives. Mr S S Rathore, President-elect of IEI, pronounced the exhortation to newly-admitted graduates. In his lucid presentation, Mr Rahtore appealed to all pass-out students to dedicate themselves for the development of engineering profession selflessly and also with ethical standards. Mentioning the need of introducing Sections A&B examinations for practicing engineers in way back 1928, Mr Rathore observed that the Institution has been keeping the standard of its examinations comparable with the requirements of the profession on the changing global
scenario for the last eight decades. The syllabi introduced in 1928 was revised several times to embrace technological changes and to meet modern societal needs with the pace at which Indian engineering profession marching toward self-reliance. The examinations of The Institution of Engineers Mr S S Rathore presenting (India) are recognized in the his address professional circles as high achievement for future career prospects and have become popular. While dwelling on the central theme for the Seminar 'Technological Innovations for Societal Applications', Mr Rathore mentioned that the topic was apt in today's context. It is a subject of worldwide interest now. "Science, technology and innovation can drive the economic growth, help solve social and environmental problems, and reduce poverty. All countries need to develop capacity to produce and use the fruit of scientific developments clubbed with technological breakthroughs, and thus adopt knowledge to their needs and contexts. Societies also need to understand both the benefits and risks of emerging technologies, such as digital ones, in order to maximize their benefits. Technological expertise plays a significant role in the global economy. Combination of technology and innovation could lead to inclusive growth. Though several technological inventions are made, the intention of inclusive growth across the globe probably remains unachieved. Unless existing social settings that restrict the participation of some social groups in societal life are not transformed, achieving social well-being is going to remain a difficult task", opined Mr Rathore. He also felt that service delivery has to be innovative. It needs to focus on three major areas, namely, (a) new technologies capable of producing new products in a cost-effective manner; (b) social innovation that ensures distribution of goods and services; and (c) adoption of change in order to integrate the goods and services to the local settings. Hence, technology and innovation should, therefore, play complimentary roles in the process of social change. Given the significance of this domain, there is an inherent need for effective discussion and debate on aspects related to the discourse of social
10
IEI Journal-TC
change by absorbing the state-of-the-art technologies keeping in view the minimal disorder of eco-system and livelihood. Earlier, Dr L V Muralikrishna Reddy, Chairman of the Organising Committee, welcomed the dignitaries, students and other delegates present on the occasion. Maj Gen R K Sanan, VSM (Retd), Secretary and Director General, proposed a vote of thanks. Besides the Convocation, the apex technical activity of the Students'/Technicians' members included a colourful feature, namely, All-India Technicians'/Students' Seminar on 'Technological Innovations for Societal Applications'. This platform provided Students'/Technicians'/Senior Technicians members to share their knowledge in the contemporary engineering disciplines and also suggested the road map of engineering pedagogy which would ultimately develop their innovative skills in the long-run resulting to more mature path to empower society and profession simultaneously. The inauguration of Seminar/Technical Session was commenced with a befitting session inaugurated by Padmashree Prof R M Vasagam, Chairman, Board of Governors, National Design and Research Forum (NDRF), followed by a keynote address delivered by Dr N Ramani, Principal of NTTF School of Postgraduate Studies. Both the addresses were highly thought-provoking, apt and above all nearer to the hearts of all present on the occasion. In the inaugural address, Prof R M Vasagam mentioned the successful history of the indigenous technologies in various fields of engineering, including aviation, rocketry and space research of India. He underscored the need of such zeal to be energized further in the hearts of scientists and engineers in the country in their day-to-day functioning in general and advanced research in particular. He complimented the role of pass-out students of the Institution in various fields of engineering during the early stage of development of space
audience while presenting the successful stories of indigenous technologies at the dire need of the country. Starting with 3M, followed by the success of TVS cycle and Titan brand, he unfolded the success stories of these brands to the people present on the occasion. The inherent stories, as presented by Dr Ramani, became the case studies and the entire presentation was enjoyed by the audience. This session was interesting and informative as well. Both the experts, in their chosen fields of engineering, had contributed immensely in the country and in their presentation, they appeal to all budding engineers to put their best for the progress of engineering in the long-run that would ultimately benefit the country's development index of engineering and technology. Both of them made clarion call to all budding engineers to dedicate themselves to pay more attention to the cause of engineering education in general and research and development in particular, so that India become a vibrant engineering force in the comity of nations in near future. The entire programme was chaired by Dr S Nagabhushana Rao, Chairman of All-India
Technicians' Committee and the Council Member, in which six technical papers were presented and discussed. Based on the laid down guidelines for finalization of awards out of all presentations, a panel of judges, comprising Dr N S Kumar, Mr C J Jagadeesha, Prof S Parthan, and Dr K Ramachandra adjudged the following papers, which were endorsed by the Chairperson of the Seminar Session as the winners of the competition in various categories:
Seminar Session/Technical Session Group II : Engineering College Students' Chapter Name(s) Amit Kumar Title of the Paper Solar-based Dry and Wet Control for Agriculture Irrigation System Magnetic Computers Category of Prize First
Second
Group III : Polytechnic Students' Chapter Name R Manoj Kumar and T Subash Title of the Paper Modern Machining Process Category of Prize First
Prof R M Vasagam delivering his address during the inauguration of the Seminar
research in India after independence. This route of non-formal education has time-tested and provided yeomen contribution in the development of engineering progress in the country. Dr Ramani, in his keynote address, mesmerized the entire
The above session was attended by a large number of Students/Technicians/Senior Technicians members of IEI/ Council Members and educationists. The session witnessed the presentation of technical papers on contemporary engineering topics as well as on various emerging areas of engineering interest with possible suggestions of application of knowledge presented in the papers to combat the problems being faced by mankind in the society. The session was highly interactive and evoked keen interest amongst all participants present on the occasion.
11
12
IEI Journal-TC
September 01, 2012. Mr S Gorai and Mr B N Karmakar were elected as Chairman and Honorary Secretary, respectively for the session 2012 - 2013. The Chapter also organized six committee meetings, six short-term courses, one technical visit to 'Indian Air Force' besides four film shows. The technical programmes were informative and members were highly satisfied. Jamshedpur During the period April - September 2012, the Jamshedpur Technicians' Chapter conducted the election of the executive
Annual General Meeting of the Technician Chapter of Kota Local Cente in progress
13
Public Utility Online Services on Internet' delivered by Mr Narendra Jain, Senior Lecturer, Government Polytechnic College, Kota, was also organized on the occasion. Orissa During the period April - September 2012, the Orissa Technicians' Chapter conducted the election of the executive committee and also the annual general meeting on September 29, 2012, wherein Mr Balakrushna Das and Ms Sangita Badajena were elected as Chairman and Honorary Secretary, respectively for the session 2012 - 2013. The Chapter also organized four committee meetings and four lectures namely, (i) 'Construction of Concrete Pavements A Working Approach to Supervision and Quality Control' (ii) 'Powering Indian Telecom Towers with Photovoltaic Cells - A Step Towards Sustainable Telecommunication' (iii) 'WTO and Indian Technical Education' (iv) 'Energy Change and Its Impact on Water Resources in Indian Scenario : Experiences of Odisha' delivered by Mr T C Patra, Dr S M Ali, Dr Dulu Patnaik, Mr K Biswal and Dr L K Bisoyi, respectively. Each of the above-mentioned lectures was highly informative and evoked keen interest amongst the participants.
Maharashtra During the period April - September 2012, the Maharashtra Technicians' Chapter conducted the election of the executive committee and also the annual general meeting on September 23, 2012. Mr Kathe Abhishek Arvind and Mr Sodha Kamlesh Prabhudas were elected as Chairman and Honorary Secretary, respectively for the session 2012 - 2013. The Chapter also organized two committee meetings and one lecture on 'Scientific Aspects of Indian Traditional Diet', delivered by Mr S Kumar, Director, Appropriate Diet Therapy Centre, Mumbai besides the conduct of one film show during the period. Nashik During the period April - September 2012, the Nashik Technicians' Chapter conducted the election of the executive committee and also the annual general meeting on September 28, 2012, wherein Mr Shaikh Mohammed Farhan and Ms Gaikwad Vishakha Keshavrao were elected as Chairman and Honorary Secretary, respectively for the session 2012 - 2013. Rajasthan The Rajasthan Technicians' Chapter conducted election of the executive committee along with the annual general meeting on August 29, 2012, wherein Mr Bhoori Singh and Mr Rajendra Singh were elected as Chairman and Honorary Secretary, respectively for the session 2012 - 2013. West Bengal During the period April - September 2012, the West Bengal Technicians' Chapter conducted the election of the executive committee and also the annual general meeting on September 18, 2012. Mr Sourav Dasgupta and Mr Tridip Chowdhury were elected unanimously as Chairman and Honorary Secretary, respectively for the session 2012 - 2013.
A view of audience attending the Annual General Meeting of the Technicians Chapter of Orissa
Reports for the perod April-September 2012, received at Headquarters up to November 30, 2012 are included above.
Conduct of Section A (Non-diploma) and Section B Examination at Haryana State Centre( Karnal), and Belapur and Kanpur Local Centres It has been decided to conduct section A (Non-diploma) and Section B Examinations at Karnal (centre code 132), Belapur (centre code 407) and Kanpur (centre code 208),in addition to Section A (Diploma ) examination, with effect from Winter 2012 Examination. Candidates interested to appear in Section A (Non-diploma) or Section B examination at any one of the aforesaid centres must mention code of the centre accordingly while submitting their examination application form for Summer 2013 Examination with requisite fee. Conduct of Section A (Non- diploma) Examination at Kozhikode The Council at its 673rd meeting held at Kolkata decided to conduct Section A (Non-diploma) examination, in addition to Section A (Diploma) examination at Kozhikode (centre code 673) with effect from Summer 2013 Examination. Candidates interested to appear in Section A (Non-diploma) examination at Kozhikode in Summer 2013 examination must mention the centre code of Kozhikode while submitting their examination application form with requisite fee.
14
IEI Journal-TC
FN
AN
FN
AN
AN
AN
AN 206 Engineering Physics and Chemistry AN 207 Engineering Drawing and Graphics
AR 406 CH 406 Surveying, Building Chemical Process Principles Construction and Materials CH 414 AR 414 Fluid Mechanics Prestressed and Precast CH 424 Concrete Structures Chemical Process Technology AR 434 CH 434 Computer Graphics Fertilizer Technology AR 415 Structural Design AR 407 Architectural Design CH 415/425/435 Instrumentation and Control CH 407 Chemical Engineering Equipment Design
CV 406 Principles of Geoinformatics CV 414 Structural Dynamics CV 424/434 Design of Water and Wastewater Treatment Systems CV 415 Seismic Design of Structures CV 435 Construction Management Systems CV 407 Analysis and Design of Structures
15
FN
EL 414 Power System Performance EL 424 Electrical Power Utilisation EL 434 Instrumentation Systems
IC 402 Engineering Management CP 412/422 Computer Networks CP 432 Theory of Computation CP 403 Data Structures CP 404 Programming Languages EC 413 Microwave Engineering EL 412/422/432 Power Electronics EC 423 IC Design Techniques EC 433 Biomedical Electronics EL 403 Power Systems EL 404 Circuit and Field Theory EL 413 High Voltage Engineering and Power Apparatus EC 403 Communication Engineering EC 404 Circuit Theory and Control MC 412 Power Plant Engineering MC 422 Optimisation-Theory and Applications MC 432 Computer Aided Manufacturing MC 403 Mechanics of Solids MC 434 Manufacturing Automation
FN AN
EC 412 Radar and Antenna Engineering EC 422 Pulse and Digital Circuits EC 406 Electronic Circuits EC 405 Microprocessors and Microcontrollers EC 414 Optical and Satellite Communication EC 424 Solid State Physics and Semiconductor Devices EC 434 Signal Processing
MC 415 Turbomachinery MC 425 Computer Aided Engineering Design MC 435 Production Management MC 406 Manufacturing Technology MC 405 Thermal Science and Engineering MC 414 Internal Combustion Engines MC 424 Design of Machine Tools
FN
AN
CP 414 Artificial Intelligence SEVENTH DAY (FRIDAY) 07.06.2013 CP 407 Systems Analysis and Design EL 407 Design of Electrical Systems FN CP 424/434 Computer Graphics
AN
16
IEI Journal-TC
FN
AN
MM 432 Welding and Allied Processes MM 412 Fuels, Furnaces and Refractories MM 422 Electrometallurgy and Corrosion
FN
AN FN
IC 402 Engineering Management TX 412 Modern Yarn Production and Control Systems TX 422 Non-woven, Knitting and Industrial Fabrics TX 432 Garment Technology TX 403 Textile Fibres and Testing TX 404 Yarn Manufacture TX 413/423 Engineering Design of Textile Structures TX 433 Chemistry and Technology of Man-made Fibres TX 405 Fabric Manufacture and Design TX 406 Chemical Processing and Finishing
THIRD DAY (MONDAY) 03.06.2013 AN MM 421/431 Polymer Materials and Technology MN 414/434 Mine Surveying
FN
MN 403 Mining Geology and Development of Mineral Deposits MN 404 Exploitation of Mineral Deposits MN 413 Electrical Equipment and Instrumentation in Mines MN 423 Geostatistics MN 433 Mine Planning and Excavation MN 405 Mining Machinery and Material Handling MN 406 Mine Ventilation and Environmental Hazards
AN
FN
AN
MM 405 Mechanical Behaviour of Materials MM 406 Physical Metallurgy MM 414 Non-ferrous Extractive Metallurgy MM 424 Materials Characterisation MM 434 Foundry Engineering MM 415 Instrumentation and Control MM 425 Ceramic Materials MM 435 Mechanical Working Processes MM 407 Metallurgical Design
TX 414/424 PR 415 Textile Machinery and Maintenance Inspection and Product Control TX 434 PR 424/434 Operations Research Energy Conservation, Environmental and Pollution Control TX 415/425/435 Mill Organisation, Process Economics and Quality Control TX 407 Design and Mechanisms of Textile Machines
FN
MN 415/425/435 Mine Management and Legislation MN 407 Geomechanics and Mine Design
PR 414 Design of Machine Tools PR 435 Operations Planning and Control PR 407 Design of Machine Elements
AN
17
Section A means both the Diploma and the Non-Diploma Streams; Section AD means Section A (Diploma Stream); All Schemes mean both Section A and Section B.
18
IEI Journal-TC
.................................................................................................. Pin :
19
dated
(To be filled-in by the Engineer under whom the candidate is working) 1. Name of the organization (in BLOCK letters) 2. Address of the organization (in BLOCK letters) 3. Nature of the organization (mark in the relevant box) : Company Firm Statutory Body Govt. Deptt. Public Sector Undertaking Research Organisation Statutory Body 4. Nature of activities of the organization 5. No of Employees I certify that Shri/Ms who has passed Section A Examination of The Institution of Engineers (India), is engaged/receiving training in this organization under me since.............. as................................................ (designation). His date of appointment is........................... ..................................................................................................................................... Full Signature of the Certifying Engineer & Date Designation................................................... Membership No. FIE/MIE/AMIE/AIE................. .............................................................................. (DO
NOT TEAR).............................................................................
The signature should not touch the box (Use black ink only) Name (in Capital Letter) Membership No. Signature (preferably in English) with date
Note : The photograph and signature are to be verified by the supporter, who must be a Corporate Member in the grade of FIE/MIE/AMIE only
20
IEI Journal-TC
Re-conduct of Section B Examination in Architectural Engineering Pursuant to the decision of the Council, it has been decided to conduct Section B Examination in Architectural Engineering with effect from Summer 2012 Examination. The examination will be conducted as per approved syllabi of Architectural Engineering by the Ministry of Human Resource Development, Government of India, vide its notification dated 16 Jan 2006. Eligibility Criteria 1. B.E./B.Tech. degree holders in Civil, Electrical and Mechanical Engineering disciplines may apply to become Associate/Corporate member to become eligible to appear in additional branch in Architectural Engineering. After their election as Associate/Corporate member, they will be exempted to appear in Section A examination and would be eligible to submit their application for registration of Section B examination with requisite fee. 2. Associate/corporate members interested to appear in additional branch in Architectural Engineering would be exempted to appear in Section A examination of the Institution and eligible to register for Section B Examination. 3. Diploma holders in Architectural Assistantship/Civil/Electrical/ Mechanical Engineering are eligible to become Senior Technician members provided they studied Physics, Chemistry, Mathematics, English, and Engineering Drawing and Graphics in the diploma courses approved by AICTE. After their election as Senior Technician members and passing Section A (Diploma) examination, they would be eligible to opt Architectural Engineering in Section B examination. 4. ST/T members, already pursuing Section B examination in any other branch of engineering, can apply for change of registration of Section B in Architectural Engineering. They will get six years period afresh to pass Section B Examination. The filled-in proforma for registration of Section B, available on IEI website, with a demand draft of ` 3000.00 (US $ 200 for overseas candidates) be sent so as to reach in the Headquarters office at Kolkata by 21 Sep 2012. 5. ST/T members, who will pass Section A examination in Summer 2012 Examination, can opt Architectural Engineering for Section B while submitting their Section B Registration Form with requisite fee of ` 3000.00. Rules, Syllabi, Examination Forms, etc. A copy of Rules & Syllabi (Vols. 1 & 2), of IEI examination and other examination-related forms may be obtained by writing a letter, with complete mailing address and membership number to Director (Finance) with a demand draft of ` 600/- (US $ 60 for overseas candidates) in favour of The Institution of Engineers (India) payable at Kolkata. Other Relevant Information Passout candidate in Architectural Engineering will be eligible to practice as an Architectural Engineer not as an Architect, registered with the Council of Architecture. Therefore, approval of the course by the Council of Architecture does not arise. The duration of examination for the subject Architectural Design will be of three hours only.
21
TECHNICIANS JOURNAL SUBSCRIPTION APPLICATION The Secretary & Director General The Institution of Engineers (India) 8, Gokhale Road Kolkata 700 020 Sir, I have gone through the decision of the Council, as stated above, in respect of availability of Technicians Journal on web and agree to subscribe the Technicians Journal for which I forward herewith my application with the demand draft as follows: NAME (in capital letters)
Membership no. T/ST
E-mail Id:
I enclose a demand draft of ` 100/- / ` 500/- (strike out the non-required item) bearing no. ......... drawn on........................................................................ for one year/six years with effect from June 20 to June 20 .
22
IEI Journal-TC