You are on page 1of 3

Tablet PC Supplier!

Use LiveSuite to install driver and upgrade firmware


Preparation:
1. Required files: Firmware image Upgrade tool (LiveSuit.exe) Windows USB drivers

Upgrade Steps: 1. Unzip the upgrade tool and USB drive to your hard driver Double-click the LiveSuitPack105_english.exe file, it will automatically install the driver files. Click OK to complete the driver installation. 2. Open LiveSuit.exe Double-click to open the upgrade tool LiveSuit.exe 3. Select the firmware Click the SelectImg button (the first button from the left) to select the firmware .img file. 4. Turn off your tablet
1/3

Tablet PC Supplier!
5. Press the key combination to start it in the upgrade mode a. Press the Vol - key, then press the Power button, hold two buttons at the same time b. Connect the USB cable to tablet and computer c. After connecting the USB cable, press the power button 6 times quickly or hold the Vol - keys and the Power button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning) d. DONT release the Vol - button till the LiveSuit window pops up e. You can now release the Vol - button (Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts). You should see LiveSuit window pops up; otherwise, you didnt do it correctly, you have to repeat step 4 and 5. 6. Select the format to force upgrade Livesuit prompt force format, click Yes (Y). All of the original apps installed will be removed.

2/3

Tablet PC Supplier!
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! ! 7. Upgrade begins Pop-up OK to force format dialog box, select Yes, the upgrade begins: 8. The upgrade is complete Firmware download process last about three and a half minutes or so, please wait until the prompt upgrade successful. 9. Automatic restart After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable. Slow start-up for the first time, please be patient. If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet. 10. Congratulations! You have flashed the firmware.

3/3

You might also like