You are on page 1of 11

StoreJet ToolBox

User Guide

(v1.0)
1

Contents

Hardware Requirements...................................................................................................................... 3
Supported Operating Systems ........................................................................................................... 3
What is Low Level Format................................................................................................................... 3
What is StoreJet Format Tool ............................................................................................................. 3
How to use Low Level Format ............................................................................................................ 4
1.

Click Scan Device button and search StoreJet Drive...................................................... 4

2.

Select a device that you want to format. .............................................................................. 5

3.

Click Low Level Format button. .......................................................................................... 5

4.

Press Start to run process. Or press Cancel to exit...................................................... 6

5.

Wait the process finish............................................................................................................ 6

How to use StoreJet Format Tool ...................................................................................................... 8


1.

Click Scan Device button and search StoreJet Drive...................................................... 8

2.

Select a device that you want to format. .............................................................................. 9

3.

Click StoreJet Format Tool button...................................................................................... 9

4.

Confirm the selection as below. .......................................................................................... 10

5.

Press Start to start formatting StoreJet ........................................................................... 10

6.

Press OK to continue format process .............................................................................. 10

7.

You should see status message Finish or O.K. .......................................................... 11

8.

Safety remove StoreJet From your PC .............................................................................. 11

Hardware Requirements
1. Transcend StoreJet Portable Hard Drive
2. Desktop or Notebook computer with an available USB port

Supported Operating Systems


StoreJet ToolBox supports the following operating system.
 Windows XP
 Windows Vista
 Windows 7

What is Low Level Format


Low Level Format Tool re-initializes the StoreJet Hard Drive. The
main reason to do this is attempt to revitalize your infected or corrupted
hard drive.

All data will be fully and irreversibly erased from your Hard Disk.
Please back up the data before doing the Low Level Format Tool.

What is StoreJet Format Tool


The StoreJet Format Tool provides to reformat your StoreJet Hard
Drive.

Please backup all of the data on your StoreJet drive before


running this tool.

How to use Low Level Format


1. Click Scan Device button

Note:
1. Support Transcend StoreJet only.
2. Check the device4is connected to PC correctly.

2. Select a device that you want to format.

3. Click Low Level Format button.

Note:
1. During the Low Level Format Process. All data will be fully
and irreversibly erased.
2. Please back up the data before doing the Low Level Format
Tool.
5

4. Press Start to run start. Or press Cancel to exit

Note:
1. During the Low Level Format Process. All data will be fully
and irreversibly erased.
2. Please back up the data before doing the Low Level Format
Tool.

5. Wait the process finish.

Note:
1. Press Stop button can interrupt the process.
2. Once the process stop or finish. Please use StoreJet
Format Tool to format it again. (See page11)

How to use StoreJet Format Tool


1. Click Scan Device button and search StoreJet Drive.

Note:
1. Support Transcend StoreJet only.
2. Check the device8is connected to PC correctly.

2. Select a device that you want to format.

3. Click StoreJet Format Tool button.

4. Confirm the selection as below.


A.
B.
C.
D.

USB Device : StoreJet Transcend


Drive To Format : Whole Hard Disk
Capacity : Check if the capacity is right
File System : NTFS or FAT32

5. Press Start to start formatting StoreJet


6. Press OK to continue format process

10

7. You should see status message Finish or O.K.

8. Safety remove StoreJet From your PC

11

You might also like