Professional Documents
Culture Documents
Typical Environmental Properties Biodegradation Aerobic Aerobic Aerobic Aerobic Anaerobic (BBR#1 = 2.4) Water Column Toxicity Pimephales promelas Daphnia Magna Sediment Toxicity Leptocheirus plumulosus (STR#2=13) PAH (as Phenanthrene, HPLC/UV)
%m %m %m %m %m
37 BOD 28-d 40 BOD 62-d 58 OECD 306 28-d 40-55 Strum CO2 evolution 28-d 70 Modified ISO11734 275-d 1000 1000
mg/L mg/L
mg/kg mg/kg
220 5
EPA 1654A
Typical product data are given. They do not constitute a supply specification. #1. BRR = biodegradation rate ratio (% biodegradation of C1618 internal olefin reference/% biodegradation of test material) #2. STR = sediment toxicity ratio (C1618 internal olefin reference LC50/test material LC50)
Safety
Bio-Base Products have been demonstrated to have a relatively low order of toxicity by the routes of exposure (oral, dermal, inhalation) encountered in normal handling. Like many hydrocarbon liquids, olefins will dry and de-fat the skin on prolonged contact and will result in skin irritation and dermatitis. Also, like other hydrocarbons, this product can be dangerous when aspirated or ingested. Before handling the product, refer to the Material Safety Data Sheet that is available from Shrieve Chemical Products. Additional information can be found in the Material Safety Data Sheet section.
Limitation on Use
WARNING: FOR PARAFFIN BASE FLUIDS OFFSHORE DISCHARGE Do not use this product for drilling operations involving marine discharge of cuttings containing this product. Do not discharge this product or drill cuttings containing this
DSBB300- Printed March 22, 2005 2
product into environments that may be or may become anaerobic (absent of oxygen). Anaerobic conditions are likely to exist at the seafloor and within cuttings piles in certain conditions. Testing jointly developed by the E&P industry and the US EPA indicates that this product does not biodegradable anaerobically. LAND DRILLING AND ZERO DISCHARGE OPERATIONS This product should only be used for land drilling operations and zero discharge operations where drill cuttings are managed via accepted cuttings management practices such as injection, thermal treatment, land farming, or composting. Similar to diesel cuttings, if drill cuttings containing this product are discharged to or placed in the environment, best cuttings management practices should be used.
Warranty
All products purchased from or supplied by Shrieve Chemical Products are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of lading. Shrieve Chemical Products warrants only that its product will meet those specifications designated as such herein or in other publications. All other information, including that herein, supplied by Shrieve Chemical Products is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shrieve Chemical Products makes no other warranty either express or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any products shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent.
Shrieve Products International Ltd. Suite3, 10 Churchill Square, Kings Hill, West Malling, Kent Great Britain ME19 4DU
Shrieve Chemical Products Company 1755 Woodstead Court The Woodlands, TX 77380 - USA (800) 367-4226 (281) 367-2014 (fax)
E-mail: SCP-cust-serv@shrieve.com (Customer Service)