Professional Documents
Culture Documents
CUSTOMER
M/s. ITC LIMITED-PSPD, UNIT: BHADRACHALAM, ANDHRA PRADESH NEW RECOVERY BOILER - 400TDS/D TECHNICAL SPECIFICATIONS FOR AMT AGITATOR
PROJECT SUBJECT
: :
1.
INTRODUCTION
Ash mixing tank agitator specified below is required for operation in chemical recovery boiler.
2. SCOPE OF SUPPLIES
i.
Complete agitator with supports, Worm gearbox, Coupling etc., as per the enclosed specification.
3.
SPECIFIC ASPECTS
i.
SITE CONDITIONS: a.) Mill site is situated 60 m above the MSL and temperature varies +20 to 51 OC. b.) Seismic area classification equals to zone III as per IS 1893 c.) Power supply: 415 V +10 %, 3 Phase 50 Hz + 3 %. Motor drive power to be selected with adequate margin over the power absorbed. Motor is not in supplier s scope. Please quote for spares for 2 years operation with item wise price.
ii.
iii.
4.
Sl. No.
1. 2. 3. 4. 5. 6.
DETAIL PERFORMANCE DATA DETAIL DIMENSIONAL DATA / CATALOGUES ARRANGEMENT DRAWINGS MATERIAL TEST CERTIFICATE PERFORMANCE TEST, GUARANTEE CERTIFICATE INSTALLATION, OPERATION & MAINTENANCE MANUAL
--
--
01 Rev
25.03.10 Date
SMR
Name
BB 290 M J/BB290M/SPECN/15 01
Description
Sheet 1 of 3
AMT AGITATOR ASSEMBLY To mix ESP ash with Black liquor Black liquor 1.4 10-11 Cp Deg C m 250 105 15 (Approx)
Application Fluid Specific gravity pH Viscosity Temperature Tank capacity Tank size Dia Height Baffles Type of agitator Material of construction Shaft Impeller Rotation speed Blade dia Shaft length Motor Power Motor Speed Torque required at the agitator Gear box model ,type, torque rating Dimensions of tank Specific requirement Painting Quantity
Name SMR SMR NAP Date 05.01.10 05.01.10 05.01.10
mm mm
2770 2800 2 nos. Vertical mounted propeller with foot mounted motor and worm reduction gear box AISI 304 AISI 304
rpm mm mm kW rpm
Supplier to specify Supplier to specify Supplier to specify Supplier to specify 1500 / 1450 Supplier to specify Supplier to specify Attached Propeller blades to be removable inside the tank. Agitator to have bottom guide arrangement. For Carbon steel parts like drive support etc. 1 (One)
Job Code : Doc No. : Rev No. : BB 290 M J/BB290M/SPECN/15 01
No.
01 Rev
25.03.10 Date
SMR
Name
Description
Sheet 2 of 3
ESP ash characteristics a) Bulk density - 80 to 100 kg/m3 b) Particle size 5micron to 100 micron c) Ash flow - 4.2 T/hr (approx) d) Ash composition Na2SO4 NaCl Na2CO3 - 75% -15% - 10%
- 55
m3/hr
01 Rev
25.03.10 Date
SMR
Name
BB 290 M J/BB290M/SPECN/15 01
Description
Sheet 3 of 3