Professional Documents
Culture Documents
DSC1211041CE B26
DMC-GH3PC DMC-GH3EB DMC-GH3EC DMC-GH3EE DMC-GH3EF DMC-GH3EG DMC-GH3GC DMC-GH3GD DMC-GH3GH DMC-GH3GK DMC-GH3GN DMC-GH3GT DMC-GH3AEB DMC-GH3AEF DMC-GH3AEG DMC-GH3AGC DMC-GH3AGH DMC-GH3AGK DMC-GH3AGT
DMC-GH3HPU DMC-GH3HEB DMC-GH3HEC
Panasonic Corporation 2012 Unauthorized copying and distribution is a violation of law.
TABLE OF CONTENTS
PAGE 1 Safety Precautions ----------------------------------------------- 4 1.1. General Guidelines---------------------------------------- 4 1.2. Leakage Current Cold Check--------------------------- 4 1.3. Leakage Current Hot Check (See Figure. 1) ------- 4 1.4. How to Discharge the E. Capacitor on Capacitor P.C.B. Unit ------------------------------------- 5 2 Warning -------------------------------------------------------------- 6 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices---------- 6 2.2. How to Recycle the Lithium Ion Battery (U.S. Only) ---------------------------------------------------------- 6 2.3. Caution for AC Cord (For EB/GC/GH) --------------- 7 2.4. How to Replace the Lithium Battery ------------------ 8 3 Service Navigation ----------------------------------------------- 9 3.1. Introduction-------------------------------------------------- 9 3.2. Important Notice ------------------------------------------- 9 3.3. Service Notes----------------------------------------------13 3.4. General Description About Lead Free Solder (PbF)---------------------------------------------------------15 3.5. How to Define the Model Suffix (NTSC or PAL model) -------------------------------------------------------16 4 Specifications ---------------------------------------------------- 20 5 Location of Controls and Components ------------------ 23 6 Service Mode ----------------------------------------------------- 26 6.1. Error Code Memory Function--------------------------26 7 Troubleshooting Guide ----------------------------------------28 7.1. Checking Method of Body and Interchangeable Lens -----------------------------------28 7.2. About Electronic Level ----------------------------------34 7.3. Checking Method of Battery Grip (DMWBGGH3)-----------------------------------------------------36 7.4. Wi-Fi P.C.B. ------------------------------------------------38 8 Service Fixture & Tools ----------------------------------------39 8.1. Service Fixture and Tools-------------------------------39 8.2. Clean Box --------------------------------------------------40 8.3. Service Position-------------------------------------------41 9 Disassembly and Assembly Instructions ---------------42 9.1. Camera Body Part----------------------------------------42 9.2. Disassembly and Assembly Procedure for the Lens (H-HS12035) ---------------------------------------55 9.3. Disassembly and Assembly Procedure for the Lens (H-VS014140)--------------------------------------57 10 Measurements and Adjustments --------------------------- 59 10.1. Matrix Chart for Replaced Part and Necessary Adjustment -------------------------------------------------59 11 Maintenance------------------------------------------------------- 61 11.1. Notice in external cleaning -----------------------------61 11.2. General description (Lens cleaning: Interchangeable Lens/H-HS12035) ------------------62 11.3. General description (Lens cleaning: Interchangeable Lens/H-VS014140) ----------------65 12 Block Diagram ---------------------------------------------------- 69 12.1. Overall Block Diagram ----------------------------------69 12.2. System Control Block Diagram -----------------------70 12.3. Video/Audio Process(1) Block Diagram ------------71 12.4. Video/Audio Process(2) Block Diagram ------------72 12.5. Lens/Hot shoe/Flash Block Diagram ----------------73 12.6. Power Block Diagram -----------------------------------74 PAGE 13 Wiring Connection Diagram --------------------------------- 75 13.1. Interconnection Diagram ------------------------------- 75
1 Safety Precautions
1.1. General Guidelines 1.3.
1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent X-RADIATION, shock, fire, or other hazards. Do not modify the original design without permission of manufacturer. An Isolation Transformer should always be used during the servicing of AC Adaptor whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during servicing. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
2.
3.
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a 1.5 k, 10 W resistor, in parallel with a 0.15 F capacitor, between each exposed metallic part on the set and a good earth ground, as shown in Figure. 1. 3. Use an AC voltmeter, with 1 k/V or more sensitivity, to measure the potential across the resistor. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reverse the AC plug in the AC outlet and repeat each of the above measurements. 6. The potential at any point should not exceed 0.75 V RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 mA. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.
4.
5.
1.2.
1. Unplug the AC cord and connect a jumper between the two prongs on the plug. 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1 M and 5.2 M. When the exposed metal does not have a return path to the chassis, the reading must be infinity.
1.4.
CAUTION: 1. Be sure to discharge the E. Capacitor on Capacitor P.C.B. Unit. 2. Be careful of the high voltage circuit on Capacitor P.C.B. Unit when servicing. [Discharging Procedure] 1. Peel the Battery Case Sheet. 2. Remove the Capacitor Cover. 3. Unscrew the 2 screws (O). 4. Remove the Capacitor P.C.B. Unit. 5. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k /5W). (An equivalent type of resistor may be used.) 6. Put the resistor between both terminals of E. Capacitor on Capacitor P.C.B. Unit for approx. 5 seconds. 7. After discharging, confirm that the E. Capacitor voltage is lower than 10V by using a voltmeter.
Fig. F1
2 Warning
2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices.
The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. CAUTION : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).
2.2.
2.3.
2.3.1.
2.3.2.1.
Important
The wires in this mains lead are coloured in accordance with the following code:
Blue Brown Neutral Live
IMPORTANT Your attention is drawn to the fact that recording of prerecorded tapes or discs or other published or broadcast material may infringe copyright laws. WARNING To reduce the risk of fire or shock hazard, do not expose this equipment to rain or moisture. CAUTION To reduce the risk of fire or shock hazard and annoying interference, use the recommended accessories only. FOR YOUR SAFETY DO NOT REMOVE THE OUTER COVER To prevent electric shock, do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. Under no circumstances should either of these wires be connected to the earth terminal of the three pin plug, marked with the letter E or the Earth Symbol.
2.3.2.
For your safety, please read the following text carefully. This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amperes and it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
2.3.2.2.
Before Use
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampere socket. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
2.3.2.3.
2.4.
2.4.1.
1. Remove the FLASH P.C.B. (Refer to Disassembly Procedures.) 2. Unsolder the each soldering point of electric lead terminal for Lithium battery (Ref. No. B8531 at foil side of FLASH P.C.B.) and remove the Lithium battery together with electric lead terminal. Then replace it into new one. NOTE: The Type No. ML421 includes electric lead terminals.
NOTE: This Lithium battery is a critical component. (Type No.: ML421 Manufactured by Energy Company, Panasonic Corporation.) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in requirement designed specifically for its use. Replacement batteries must be of same type and manufacture. They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed. Do not attempt to re-charge the old battery or re-use it for any other purpose. It should be disposed of in waste products destined for burial rather than incineration.
NOTE: Above caution is applicable for a battery pack which is for DMC-GH3/GH3A/GH3H series, as well.
3 Service Navigation
3.1. Introduction
This service manual contains technical information, which allow service personnels to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
3.2.1. 3.2.1.1.
Important Notice
Camera Body Unit About Mount Box Unit (Ref. 7)
*When servicing, it is recommended dealing with Clean box. (Refer to 8.2. Clean Box section of this service manual for details.)
1. This Service Manual does not contain the following repair service information for MOUNT BOX UNIT(Ref.7), because it requires special facilities and equipment. a. Schematic diagram, Block diagram and P.C.B. layout. b. Parts list for individual parts. 2. If the MOUNT BOX UNIT is confirmed as defective, exchange the MOUNT BOX UNIT as a unit (supplied as service parts size). 3. Before exchanging the MOUNT BOX UNIT, the performances must be carefully checked, by following the 7.Troubleshooting Guide section of this service manual. Important: 1. After replacing the MOUNT BOX UNIT, the mount box data has to be stored to the unit. The mount box unit supplied as service parts has affix the label of own configure data. By inputting these data into the adjustment software and writing these data to FLASH-ROM (IC9999), the shutter adjustment becomes needless. In addition, the adjustment software can read data encoded to QR code by using WEB camera with a close-up function. Refer to the adjustment instruction in the adjustment software for details.
Fig. S1
2. The full adjustment must be performed after replacing the MOUNT BOX UNIT, otherwise picture quality can not be meet with specification.
3.2.1.2.
Important: 1. Before exchanging the MAIN P.C.B., the performances must be carefully checked, by following the 7.Troubleshooting Guide section of this service manual. 2. Before replacing the MAIN P.C.B. and/or Flash-ROM, proceed the EEPROM data backup from the unit. After replacing the MAIN P.C.B. and/or Flash-ROM, overwrite the EEPROM data with backup data from the unit first, then proceed the adjustment /inspection.Refer to the adjustment instruction in the adjustment software for details. 3. The full adjustment must be performed after replacing the MAIN P.C.B. and/or Flash-ROM, otherwise Picture quality can not be met with specification.
3.2.1.3.
2 varistors:VA4403 & VA4404 are installed on the EXT MIC P.C.B. as follows. Please note when they are exchanged.
10
3.2.2. 3.2.2.1.
Lens Unit (Interchangeable Lens: H-HS12035) About Lens Main Block Unit (Ref. 210)
1. LENS MAIN BLOCK UNIT (Ref. 210) is not supplied due to difficulty of the transportation issue (Fragile, Dust-free packing), and requires critical lens adjustments. Therefore, any needs of the LENS MAIN BLOCK UNIT (Ref. 210), carefully confirm its performance in advance. 2. Once LENS MAIN BLOCK UNIT (Ref. 210) is confirmed as defective, place order LENS Unit (Ref. 200) and replace REAR FRAME UNIT, to maintain Serial number of owners original lens.
Fig. S2
11
3.2.3. 3.2.3.1.
Lens Unit (Interchangeable Lens: H-VS014140) About Lens Main Block Unit (Ref. 315)
1. LENS MAIN BLOCK UNIT (Ref. 315) is not supplied due to difficulty of the transportation issue (Fragile, Dust-free packing), and requires critical lens adjustments. Therefore, any needs of the LENS MAIN BLOCK UNIT (Ref. 315), carefully confirm its performance in advance. 2. Once LENS MAIN BLOCK UNIT (Ref. 315) is confirmed as defective, place order LENS Unit (Ref. 300) and replace REAR FRAME UNIT, to maintain Serial number of owners original lens.
Fig. S3
3.2.4.
Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector. Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
12
3.3.
3.3.1.
Service Notes
About Wi-Fi Function
13
3.3.2.
This Camera unit has the personal information of wireless LAN connection the customer has registered. For the protection of private information, please erase the personal information after the completion of repair by INITIAL SETTING. In addition, please print out the following documents, and pass to the customer with the Camera unit. Printing Material [Leaflet for Customer]
[For The Customer] Before using your camera please check the Wi-Fi settings. Depending on what was serviced, the settings may have been reset to the factory defaults.
1. If the settings were reset you will need to reenter your Lumix Club login ID and password. If you have forgotten the login ID and/or Password, please connect to the Lumix Club web site and create a new ones.
2.You may also have to reenter the settings for your local Wi-Fi network settings.
14
3.4.
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30C (86F) more than that of the normal solder. Distinction of P.C.B. Lead Free Solder being used
Service caution for repair work using Lead Free Solder (PbF) The lead free solder has to be used when repairing the equipment for which the lead free solder is used. (Definition: The letter of PbF is printed on the P.C.B. using the lead free solder.) To put lead free solder, it should be well molten and mixed with the original lead free solder. Remove the remaining lead free solder on the P.C.B. cleanly for soldering of the new IC. Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the lead free solder. Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 35030C (66286F). Recommended Lead Free Solder (Service Parts Route.) The following 3 types of lead free solder are available through the service parts route. RFKZ03D01KS-----------(0.3mm 100g Reel) RFKZ06D01KS-----------(0.6mm 100g Reel) RFKZ10D01KS-----------(1.0mm 100g Reel) Note * Ingredient: tin (Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
15
3.5.
There are eight kinds of DMC-GH3 (Camera body unit), regardless of the colours. a) DMC-GH3 (Japan domestic model) b) DMC-GH3P/PC c) DMC-GH3EB/EC/EF/EG/GH/GN d) DMC-GH3EE e) DMC-GH3GK f) DMC-GH3GT g) DMC-GH3GD h) DMC-GH3PU/GC What is the difference is that the INITIAL SETTINGS data which is stored in Flash-ROM mounted on MAIN P.C.B..
3.5.1.
Defining methods:
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
NOTE: After replacing the MAIN P.C.B., be sure to achieve adjustment. Refer to the adjustment instruction in the adjustment software for details.
16
3.5.2.
INITIAL SETTINGS:
After replacing the MAIN P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following procedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, make sure to read the following CAUTION.
2. PROCEDURES: Precautions: Read the above CAUTION carefully. Preparation: Attach the fully charged Battery, and insert the SD memory card. Step 1. The temporary cancellation of INITIAL SETTINGS: Set the [ Drive mode dial ] to SINGLE. While keep pressing [ DISP. ] and [ AF/AE LOCK ] simultaneously, turn the Power on. Step 2. The cancellation of INITIAL SETTINGS: Press the [ PLAYBACK ] button in order to enter the [ PLAYBACK ] mode. Press [ AF/AE LOCK ] and [ UP ] of Cursor buttons simultaneously, then turn the Power off. The LCD displays the ! mark before the unit powers down.
Step 3. Turn the Power on: Set the mode dial to [ P ] (Program AE Mode), then turn the Power on.
17
Step 4. Display the INITIAL SETTING: While keep pressing [ MENU/SET ] and [ RIGHT ] of Cursor buttons simultaneously, turn the Power off. The INTIAL SETTINGS menu is displayed. There are two kinds of INITIAL SETTINGS menu form as follows: [CASE 1. After replacing MAIN P.C.B.] [Except EG, EB, EC and EF models : (VEP56171A is used as a Main P.C.B.)] When MAIN P.C.B. has just been replaced, all of the model suffix are displayed as follows. (three pages in total)
[Only for EG, EB, EC and EF models : (VEP56171B is used as a Main P.C.B.)] When MAIN P.C.B. has just been replaced, only 4 model suffix are displayed as follows.
Step 5. Choose the model suffix in INITIAL SETTINGS: (Refer to CAUTION) [Caution: After replacing MAIN P.C.B.] The model suffix can been chosen, JUST ONE TIME. Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed. Therefore, select the area carefully. Select the area with pressing [ UP ] / [ DOWN ] of Cursor buttons.
18
Step 6. Set the model suffix in INITIAL SETTINGS: - Press the [ RIGHT ] of Cursor buttons. - The only set area is displayed, and then press the [ RIGHT ] of Cursor buttons after confirmation. (The unit is powered off automatically.)
Step 7. CONFIRMATION: Confirm the display of PLEASE SET THE CLOCK in concerned language when the unit is turned on again. When the unit is connected to PC with USB cable, it is detected as removable media. (When the GT or GK model suffix is selected, the display shows PLEASE SET THE CLOCK in Chinese.) 1) As for your reference, major default setting condition is as shown in the following table. Default setting (After INITIAL SETTINGS)
a) b) c) d) e) f) g) h) i) j) k) l) m) n) o) MODEL DMC-GH3 (Japan domestic model) DMC-GH3P DMC-GH3PC DMC-GH3PU DMC-GH3EB DMC-GH3EC DMC-GH3EE DMC-GH3EF DMC-GH3EG DMC-GH3GC DMC-GH3GD DMC-GH3GH DMC-GH3GK DMC-GH3GN DMC-GH3GT VIDEO OUTPUT NTSC NTSC NTSC NTSC PAL PAL PAL PAL PAL PAL NTSC PAL PAL PAL NTSC LANGUAGE Japanese English English Spanish English English Russian French English English Korean English Chinese (simplified) English Chinese (Traditional) DATE Year/Month/Date Month/Date/Year Month/Date/Year Month/Date/Year Date/Month/Year Date/Month/Year Date/Month/Year Date/Month/Year Date/Month/Year Date/Month/Year Year/Month/Date Date/Month/Year Year/Month/Date Date/Month/Year Year/Month/Date REMARKS
19
4 Specifications
The following specification is for DMC-GH3EB/GH3AEB/GH3HEB. Some specifications may differ depending on model suffix.
20
21
22
23
24
25
6 Service Mode
6.1. Error Code Memory Function
1. General description This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred more than 16, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly. (i.e., when the unit is powered on by the battery, the battery is pulled out) The error code is memorized to Flash-ROM when the unit has just before powered off. 2. How to display The error code can be displayed by ordering the following procedure: Preparation Attach the fully charged Battery, and insert the SD memory card. Step 1. The temporary cancellation of INITIAL SETTINGS: Set the [ Drive mode dial ] to SINGLE. While keep pressing [ DISP. ] and [ AF/AE LOCK ] simultaneously, turn the Power on. Step 2. Execute the error code display mode: Press [ MENU/SET ], [ LEFT ] of Cursor buttons and [ AF/AE LOCK ] simultaneously with the step 1 condition. The display is changed as shown below when the above buttons are pressed simultaneously. Normal display Error code display Camera information display Normal display .....
26
Error Code List: The error code consists of 8 bit data and it shows the following information.
Important notice about Error Code List About * indication: The third digit from the left is different as follows. In case of 0 (example: 2B001000) When the third digit from the left shows 0, this error occurred under the condition of INITIAL SETTINGS has been completed. It means that this error is occurred basically at user side. In case of 8 (example: 2B801000) When the third digit from the left shows 8, this error occurred under the condition of INITIAL SETTINGS has been released. (Example; Factory assembling-line before unit shipment, Service mode etc.) It means that this error is occurred at service side. Step 3. How to exit from Error Code display mode: Simply, turn the power off. (Since Error Code display mode is executed under the condition of temporary cancellation of INITIAL SETTINGS, it wake up with normal condition when turn off the power.) NOTE: The error code can not be initialized.
27
7 Troubleshooting Guide
7.1. Checking Method of Body and Interchangeable Lens
28
29
30
31
32
33
7.2.
The unit has the electronic level function using G (3-axis accelerometer) sensor inside the unit. [Principal of Operation] 1. Movement of Weight is detected by capacitance. -------- [A] 2. Each acceleration of the X/Y/Z axis is converted into data and they are output. 3. The VENUS ENGINE converts the data into a horizontal angle and an angle of inclination, and displays them to screen.
[Purpose of the adjustment] Correct the camera as the horizontal angle and an angle of inclination become within 1 degree for a live-view picture. 1. When the mount box unit or IC9999 (or Main P.C.B.) is replaced, readjustment is necessary. 2. When the mount box unit, Main P.C.B. or the exterior of the camera is replaced, please confirm following; a. Switch to display the Guidelines in LCD. b. Confirm that the vertical lines in LCD are parallel with string hanging down perpendicularly. If they are significantly shifted, readjustment is necessary. Refer to the adjustment software for procedure of adjustment. No special fixture is required. The adjustment can be performed with a table as possible horizontal, the string which hanging down perpendicularly and a general-purpose tripod.
34
[Test of the G-Sensor working] G-Sensor working can be confirmed by G-Sensor data change on the Edit Memory. [Operation] (1)-----When you acquire the data of the G-sensor continually, put a checkmark here. (2)-----Raw data of G- sensor is displayed. (3)-----Roll angle (Horizontal Level) and Pitch angle (Tilt) are displayed. (4)-----A posture state of the camera is displayed.
[Confirmation] 1. Put a checkmark in four portions of marked (1) each. 2. Move the camera and confirm the change of each data of (2) and (3). Above value is one example. The value changes according to dispersion of each G-sensor. 3. When the value (3) is matched with the posture of the camera, G-sensor itself is normal. If they are significantly different, G-sensor may be defective.
35
7.3.
36
37
7.4.
7.4.1.
Wi-Fi P.C.B.
How to Remove Wi-Fi Password Protection
To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, this unit protects the Wi-Fi function with a password. It is unable to service with password locked condition. When accepting for repair, the unit has been set the Wi-Fi password by customer, run the [Reset Wi-Fi Settings] for removing Wi-Fi password, then check the operation. [Reset Procedure of Wi-Fi Settings] 1) Press the [ MENU/SET ] button, and select the [ SETUP ] mode by Cursor buttons, then press the [ MENU/SET ] button. 2) Select [ Reset Wi-Fi Settings ] by Cursor buttons, then press the [ MENU/SET ] button. 3) Select [ YES ] and press the [ MENU/SET ] button in several times. (The [ Reset Wi-Fi Settings ] performs not only resetting Wi-Fi Password but also resetting other all Wi-Fi Settings.)
7.4.2.
38
39
8.2.
Clean Box
The repair quality is considered, and it is recommended working in the environment of specified clean level less than class 10,000 (Federal Standard 209D). (When remove the 1st lens frame, it is indispensable.) [NOTE] Work in the environment of specified clean level less than class 10,000 (Federal Standard 209D) when remove the 1st lens frame for cleaning. *Refer to 11.2. General description (Lens cleaning: Interchangeable Lens/H-HS12035), 11.3. General description (Lens cleaning: Interchangeable Lens/H-VS014140) section of this service manual for details.
40
8.3.
No. 1 2 3 4 5 6 7 8 9
Service Position
Table S1 Extension Cable List Parts No. VFK1951 RFKZ0619 RFKZ0583 RFKZ0564 VFK1443 VFK2024 RFKZ0477 VFK1951 VFK1950 Connection FP9002(MAIN) - MAIN - FLASH FPC - FLASH P.C.B. FP9300(MAIN) - HINGE FPC - LCD IF P.C.B. / MR1 SW FPC UNIT FP9007(MAIN) - MOUNT BOX UNIT FP9009(MAIN) - MOUNT BOX UNIT FP9010(MAIN) - REAR OPERATION UNIT FP9001(MAIN) - MOUNT BOX UNIT FP9004(MAIN) - Wi-Fi BG FPC - Wi-Fi P.C.B. FP9005(MAIN) - TOP UNIT FP9302(MAIN) - LVF EYE FPC UNIT Form 39pin/0.3mm FFC 61pin/0.3mm FFC 19pin/0.3mm FFC 23pin/0.3mm FFC 18pin/0.5mm FFC 51pin/0.3mm FFC 45pin/0.3mm FFC 39pin/0.3mm FFC 33pin/0.3mm FFC
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
CAUTION-1. (When servicing CAPACITOR P.C.B. UNIT) 1. Be sure to discharge the E.capacitor on CAPACITOR P.C.B. UNIT. Refer to HOW TO DISCHARGE THE E.CAPACITOR ON CAPACITOR P.C.B. UNIT. The E.capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2. Be careful of the high voltage circuit on CAPACITOR P.C.B. UNIT. 3. DO NOT allow other parts to touch the high voltage circuit on CAPACITOR P.C.B. UNIT.
41
9.1.2.
P.C.B. Location
42
9.1.3.
Disassembly Procedure
Fig (Fig. D1) Removal Card Battery 2 Screws (A) 5 Screws (B) EYE CUP Unit 2 Screws (C) 2 Screws (D) 1 Screw (E) LVF DPT Knob FP9010 (Flex) FP9300 (Flex) Rear Case Unit 2 Screws (F) Battery Contact Cover Unit Water Label FP9001 (Flex) FP9002 (Flex) FP9003 (Flex) FP9004 (Flex) FP9005 (Flex) FP9007 (Flex) FP9009 (Flex) FP9302 (Flex) P9003 (Connector) 2 Screws (G) 1 Screw (H) 2 Locking tabs Main P.C.B. 1 Screw (I) 2 Locking tabs 1 Convex Heat Radiation Plate Unit 1 Screw (J) 1 Screw (K) Grip L Tape Tape 3 Hooking parts Front Grip L Unit 5 Screws (L) 1 Screw (M) P8501 (Connector) Top Unit 2 Screws (N) Battery Case Unit Battery Case Sheet 2 Locking tabs Capacitor Cover 2 Screws (O) 2 Hooking parts Capacitor P.C.B. Unit Water Label 4 Screws (P) Mount Box Unit 1 Screw (Q) 1 Locking tab Connector (A) 1 Screw (R) 1 Locking tab Wi-Fi P.C.B. Wi-Fi Holder
(Fig. D2)
(Fig. D3)
10
LCD IF P.C.B.
Main P.C.B.
(Fig. D4)
(Fig. D5)
11 12
13
Top Unit
14
15
Flash P.C.B.
(Fig. D13)
Wi-Fi P.C.B.
(Fig. D14)
16
Fig Removal (Fig. D15) 2 Screws (S) Hinge Arm Cover Top Hinge Arm Cover Bottom 4 Screws (T) Hinge Packing Cover Unit (Fig. D16) 6 Ribs Connector (B) 2 Solders MR1 SW FPC Unit 2 Ribs Hinge Cushion 4 Hinge Fix Cover 2 Screws (U) LCD Unit (Fig. D17) 2 Screws (V) 4 Screws (W) 6 Locking tabs FP7204 (Flex) LCD Case Bottom (Fig. D18) FP7201 (Flex) LCD Hinge Unit FP7202 (Flex) FP7203 (Flex) 1 Rib 1 Hooking part LCD IF P.C.B. (Fig. D19) LCD Packing (Fig. D20) 8 Screws (X) 1 Screw (Y) 1 Screw (Z) Rear Operation Unit Sheet A 4 Hooking parts Speaker (Fig. D21) When Installing (Fig. D22) 1 Screw (a) 1 Screw (b) LVF Unit 3 Locking tabs LVF Module Holder LVF Module Cushion Connector (C) LVF Module (Fig. D23) 2 Screws (c) 1 Screw (d) FP4401 (Flex) 2 Solders Ext Mic P.C.B. 1 Convex Mic Jack Holder Mic Jack Cover (Fig. D24) 3 Screws (e) FP8502 (Flex) FP8503 (Flex) FP8504 (Flex) P8502 (Connector) 2 Solders Flash P.C.B. (Fig. D25) 2 Screws (f) 2 Convexes Flash Case Top
43
9.1.3.1.
(Fig. D2)
(Fig. D1)
44
(Fig. D3)
9.1.3.2.
(Fig. D5)
(Fig. D4)
45
9.1.3.3.
9.1.3.5.
9.1.3.4.
46
9.1.3.6.
(Fig. D11)
(Fig. D10)
47
9.1.3.7.
(Fig. D13)
(Fig. D12)
48
9.1.3.8.
9.1.3.9.
49
(Fig. D17)
(Fig. D16)
50
(Fig. D18)
(Fig. D19)
51
(Fig. D21)
(Fig. D20)
52
(Fig. D23)
(Fig. D22)
53
(Fig. D24)
(Fig. D25)
NOTE: (When Installing) Make sure to confirm the following points when installing: The Screw is tightened enough. Installing conditions are fine. (No distortion, no abnormalspace.) No dust and/or dirt on Lens surfaces. LCD image is fine. (No dust and dirt on it, and no gradient images.)
54
9.2.
It is recommended dealing with Clean box, to keep maintaining the dustproof environment. (Refer to 8.2. Clean Box section of this service manual for details.) Important: 1. When servicing the enclosure part (refer to Fig. X1), it must be performed inside of specified clean level. (Specified clean level: Less than class 10,000 (Federal Standard 209D)) As for procedure, refer to the 11 Maintenance for details. 2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other than necessary cases. 3. Do not touch the surface of the lens glasses with your fingers. 4. Blow off the dust on the surface of the lens with a blower brush. 5. 5th lens has the Nano Surface Coating. Avoid damage the coating, please DO NOT clean it with cloth. Please keep cleaning 5th lens, blow off the dust with air brush. Proceed disassemble and assemble, by referring the following table Fig. X1. NOTE: 1. When tightening screws, use a torque driver (RFKZ0456) with specified torque mentioned in each step.
55
(Fig. X1)
56
9.3.
It is recommended dealing with clean box, to keep maintaining the dustproof environment. (Refer to 8.2. Clean Box section of this service manual for details.) Important: 1. When servicing the enclosure part (refer to Fig. K1), it must be performed inside of specified clean level. (Specified clean level: Less than class 10,000 (Federal Standard 209D)) As for procedure, refer to the 11 Maintenance for details. 2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front & rear), other than necessary cases. 3. Do not touch the surface of the lens glasses with your fingers. 4. Blow off the dust on the surface of the lens with a blower brush. 5. Use lens cleaning KIT (BK)(VFK1900BK). Proceed disassemble/assemble, by referring the following table and Fig. K1. NOTE: 1. When installing the screws, be sure to use the torque driver (RFKZ0456) and tighten the screws with specified torque, mentioned on the above table.
57
(Fig. K1)
58
*1 Inspect it, not only corresponding part is replaced, but also camera body is shocked and/or dropped. The Panasonic camera body in accordance with the Micro Four Thirds system (DMC-G1 unit, DMC-GH1 unit or DMC-GF1 unit etc. marketed commodity: operates normal) and a standard zoom lens H-FS014045 (marketed commodity: operates normal) is required as a reference machine. Refer to the adjustment instruction in the adjustment software for details. *2 NOTE: (When exchange the MAIN P.C.B.) IMPORTANT NOTICE (After replacing the MAIN P.C.B.) After replacing the MAIN P.C.B., make sure to perform the INITIAL SETTINGS first, then release the INITIAL SETTINGS in order to proceed the electrical adjustment. NOTE: 1. If electrical adjustment or data re-writing is executed before INITIAL SETTINGS, suffix code list is never displayed, and it cannot be chosen suitable suffix code. 2. Never remove the battery during initial setting in process. Correspond by either the following when exchange the MAIN P.C.B. unavoidably by destruction and damage etc. of MAIN
59
P.C.B.. 1. When it can turn on power, and the adjustment software can communicate with the camera body: Before replacing, proceed the Flash-ROM (IC9999) data backup from the unit. After replacing, overwrite the Flash-ROM (IC9999) data with backup data from the unit, before proceeding the main body adjustment. 2. When it cannot turn on power, or the adjustment software cannot communicate with the camera body: The readjustment of mount box unit etc. are necessary. Refer to the adjustment instruction in the adjustment software for details. *3 NOTE: (After exchange the mount box unit) Execute the resolution inspection by the comparison with the standard model (DMC-G1K etc.: operates normal). Refer to the adjustment instruction in the adjustment software for details. *4 Confirm self recording/playback motion picture of AVCHD mode by the LCD. Confirm it on the TV with HDMI socket when repair HDMI relation. * There are no LCD adjustment model.
*5 NOTE: (When AWB adjustment) After change to WB adjustment mode for service with software, the adjustment is executed. After adjusting the AWB adjustment, to cancel the WB adjustment mode for service. Details, refer to the instructions in the adjustment software. *6 About the G sensor adjustment Offset adjustment for built in electronic level (tilt sensor). Refer to the adjustment instruction in the adjustment software for details.
About the 3D interchangeable lens (H-FT012) correspondence This unit has no special structure (circuit or part) for the 3D interchangeable lens correspondence, only by software is processed the 3D interchangeable lens correspondence. Therefore, if taken with other lenses as usual, the 3D interchangeable lens is no problem for operation.
60
11 Maintenance
11.1. Notice in external cleaning
11.1.1. ABOUT THE BODY
NOTE: Before cleaning the camera, remove the battery and/or disconnect power plug from the outlet. Also, remove the SD Memory card and lens unit.
61
11.1.2.
Important: 1. When removing the 1st / 5th lens frame unit, it has to be proceed inside of specified clean level. (Less than class 10,000 (Federal Standard 209D)) As for clean box, refer to the 8.2. Clean Box, in details. 2. When tighten the screws, use torque driver (RFKZ0456) with specified torque. 3. To keep the Lens performance, can only use the original 1st / 5th lens frame unit . So the 1st / 5th lens frame unit is not supplied as spare parts. Also do not exchange the 1st / 5th lens frame unit taking from others. 4. 5th lens has the Nano Surface Coating. Avoid damage the coating, please DO NOT clean it with cloth. Please keep cleaning 5th lens, blow off the dust with air brush.
62
11.2.1.
Important: It must be performed inside of specified clean level. (Specified clean level: Less than class 10,000 (Federal Standard 209D))
63
11.2.2.
1. 2. 3. 4.
Disassembly procedure
11.2.3. 11.2.3.1.
1. Please insert the pins (four places) of the DECO.RING to the hole of the hood adapter. Use new one, do not use the one which is removed. Double-stick tape sticks to the DECO.RING of the repair part. Please remove the old double-stick tape from HOOD ADAPTER. 2. After installing the DECO.RING, use a soft cloth to press it into place.
64
Important: 1. When removing the 1st lens frame unit, it has to be proceed inside of specified clean level. (Less than class 10,000 (Federal Standard 209D)) As for clean box, refer to the 8.2. Clean Box, in details. 2. When tighten the screws, use torque driver (RFKZ0456) with specified torque. 3. To keep the Lens performance, use only the 1st lens frame unit which was fitted as it was. Therefore, the 1st lens frame unit is not supplied as spare parts. Also do not exchange the 1st lens unit taking from others.
65
11.3.1.
Disassembly procedure
Important: It must be performed inside of specified clean level. (Specified clean level: Less than class 10,000 (Federal Standard 209D))
66
11.3.2.
Assembly procedure
2. Tighten the 3 screws (B) by using torque driver with specified torque. (Torque driver : RFKZ0456) (Torque : 9.8 1.0N-cm)
67
2. Tighten the 3 screws (A) by using torque driver with specified torque. (Torque :11.8 1.0 N-cm)
68
12 Block Diagram
12.1. Overall Block Diagram
OVERALL BLOCK DIAGRAM
MOUNT BOX UNIT MOS IMAGE SENSOR 16M (Built in AFE)
X3101 (36MHz) SD CARD
LENS UNIT
ECM(L) ECM(R)
IC9102 SYSTEM IC
MICROPHONE AMP SPEAKER AMP VIDEO OUT
SSWF
IC9105,9106 BUS SW
REMOTE TERMINAL
Q9801, T9801
HDMI TERMINAL
Q8001,8002 QR8001,8002
TOUCH PANEL
FLASH
Q8501,8502 Q8504
IC9307 FPGA IC9310,9311 LVF DRIVER COLOR LVF IC9309 DC/DC INVERTER IC9315 REGULATOR
0.38" PANEL 1700k dots
IC9103 REGULATOR
X9101 (32.72kHz)
IC9102 SYSTEM IC
X6001 (24MHz)
IC1051,1081,9001,9104 IC9034,9201,9305,9314 REGULATOR IC1071 STEP DOWN CONVERTER IC7201 DC-DC CONVERTER
IC1001 POWER
(POWER SUPPLY)
BATTERY PACK
69
FLASH P.C.B.
FP8503 7 FP8503 8 FP8503 9 FP8503 10 FP8503 1 FP8503 2 FP8503 14 FP8503 13 FP8503 12 AD0 IN7 D10 (TOP KEYIN) (TOP KEYIN) FP9002 FP8501 14 15 FP9002 FP8501 15 16 FP9002 FP8501 16 17 FP9002 8 FP9002 9 FP9002 6 FP9002 7 FP8501 9 FP8501 10 FP8501 7 FP8501 8 (CMD DIALF1) (CMD DIALF0) (SHUTTER HALF) (SHUTTER FULL) (CMD DIALR1) (CMD DIALR0) JK8501 AD0 IN6 C10 (AV KEY DET) (AV KEY DET) FP9002 FP8501 3 4 (AV KEY DET) 1 2 X6001 (24MHz) FP8503 11 FP8503 6 FP8503 5 FP8502 2 FP8502 3 FP8502 4 FP8502 5 FP8504 2 FP8504 3
AF LED
IC6001
(VENUS ENGINE) SHUTTERHALF 104 CS 28 SO 24 SCLK 25 X9101 (32.72kHz) 43 OSC IN RL2701 PIOC6 107 (ACCEL IRQ1) RL2702 PIOC7 108 (ACCEL IRQ2) 9 INT2 SCLK 4 11 INT1 SDO 7 SDI 6 NCS 8 SSWF IN 16 SSWF CTL 17 PIOB4 81 PIOA5 63 PIOA4 PIOA6 PIOD2 SSWF1OUT SSWF0OUT 62 64 111 12 11 (SSWF0) (SSWF ON H) (LCD TP RST) (LCD ROTATE2) (LCD ROTATE1) (LCD OPEN H) (LCD EVF SEL) (SSWF OUT1) (SSWF OUT0) (SSWF0) K26 IS1 FCK (SSWF ON H) L24 IS RESET GPIO36 AC14 GPIO37 AF13 4 PW D3.0V 5 SI 27 (SHUT HALF) (S SY CS) (S SY SDIN) (S SY SCK) (S SY SDO) RL9121 RL9102 RL9107 RL9108 RL9101 RL6007 (SHUT HALF) (S SY CS) (S SY SDIN) (S SY SCK) (S SY SDO) B13 AD1 IN5 W4 GPIO76 C13 AD1 IN6 AD13 GPIO39 AF12 GPIO41
MODE DIAL
IC2701
(TILT SENSOR)
IC2702
(OR GATE IC) 1 (S ACCEL CS) 2 3
42 OSC OUT
REMOTE TERMINAL
Wi-Fi BG FPC
BATTERY DRIP TERMINAL FP9004 4 FP9004 3 FP9004 2 FP9004 5 FP9004 6 FP9004 10 FP9004 31 (SHUTTER0) (SHUTTER1) (CMD DIAL VR1) (CMD DIAL VF0) (CMD DIAL VR0) (CMD DIAL VF1) (SW UNREG2) CL6013 AA1 GPIO71
MCK24I H1 (AF DIAL0) MCK24O G1 (AF DIAL1) AD0 IN4 A10 (REAR KEYIN2) (DISP ON L) (SET ON L) (DEL ON L) AC13 GPIO40 AB17 GPIO46 AD12 GPIO53 (FN2 ON L) D14 AD1 IN3 (FN3 ON L) CL6014 AD1 IN0 A14 (CROSS KEYIN) (RIGHT ON L) (UP ON L) (LEFT ON L) AD0 IN3 D11 (REAR KEYIN1) (REC ON L) (AF AE LOCK) FP9010 1 FP9010 2 FP9010 9 FP9010 13 FP9010 18 FP9010 6 FP9010 7 FP9010 3 FP9010 4 FP9010 17 FP9010 11 FP9010 14 FP9010 16 FP9010 8 FP9010 12 FP9010 5,10,15
PW D4.5V
Q9801
2 SSWF OUT To SSWF UNIT UNREG GND 1 6 T9801 3 4 8 7 6 5 1 2 3 4
MR1 SW FPC
PLAY LCD/LVF MR1 MR2 (X PLAY ON) (X LVF LCD ON) (X MR1 SIG) (X MR2 SIG) FP9300 1 FP9300 2 FP9300 13 FP9300 14 (PLAY ON L) (LCD EVF SEL) (LCD OPEN H) FR ALE H23 (LCD ROTATE1) FR CLE G24 (M SHUT2) AB1 GPIO63 GPIO49 AB14 GPIO42 AB21 (CMD DIALT0) (CMD DIALT1) CL9901 (M SHUT1) CL9902
Q9901 IC9901
(MOTOR DRIVE) 18 IN1 17 STBY 19 IN2 RO1 RO2 FO1 FO2 13 14 11 12
CL9903 GPIO77 W3 ( M MOT1) CL9904 FP7201 FP9300 41 58 FP7201 7 FP7201 5 FP7201 4 FP7201 3 FP9300 24 FP9300 20 FP9300 19 FP9300 18 (LCD ROTATE2) GPIO78 W2 GPIO84 H25 (S TP REQ) (S I2C SCK) AB18 GPIO45 (S I2C SDIO) AB16 GPIO47 AD0 IN10 C9 AD0 IN11 B9 GPIO75 Y1 B12 AD2 IN1 (BRUSH1) (BRUSH3) 6 4 1Y 2Y ( M MOT2) (LPSW) (BRUSH2) CL9006
MR3 SW FPC
MR3 FP7204 3 FP7202 1 FP7202 2 FP7202 4 FP7202 5
LCD IF P.C.B.
(X MR3 SIG) (LCD ROTATE2)
FP9007 9 FP9007 12 FP9007 5-8 FP9007 1-4 FP9007 13 FP9007 16 FP9007 15 FP9007 19
CL9303
TOUCH PANEL
1A 2A
IC6003
(DUAL SCHMITT INVERTER)
70
HINGE FPC
CE# A18 A19 A23 A0
FP9300 49 (LCDOUT0-15) FP9300 34 FP9300 29 FP9300 30 FP9300 32 FP9300 25 FP9300 27 FP9300 26 FP9300 24 CL9300 CL9317 PW D3.5V GPIO50 AB13 GPIO48 AB15 (S LCD SDO) (S LCD SCK) CL9318 CL9301 FP9300 54-57 FP9300 50 (PW D3.5V) FP7201 37-40 FP7201 33 DB0-15 FP7201 17 FP7201 12 FP7201 13 FP7201 15 FP7201 8 FP7201 10 FP7201 9 FP7201 7 CL7201 FP7201 32
LCD IF P.C.B.
FP7203 28 DB0-15 FP7203 13 FP7203 33 FP7203 32 FP7203 30 FP7203 37 FP7203 35 FP7203 36 FP7203 38
WE#
E3
G7
A5 G2 F2
OE#
D15
D0
E2
C4 D5
C8
IC6001
(VENUS ENGINE) AF22 AC19 D25 D26 E24 AF18 AD14 Y26 Y23
(LCDVD) (LCDHD) (DOTCLK) (LCD CS) (LCD SDOUT) (LCD SCK) (LCD RESET)
GPIO1
CPUWE2B
FROM CS
CPUREB
GPIO17
GPIO35
GPIO57
FP9001 24 FP9001 25 FP9001 27 FP9001 28 FP9001 30 FP9001 31 FP9001 33 FP9001 34 FP9001 36 FP9001 37 FP9001 10 FP9001 11 FP9001 9 FP9001 7 FP9001 8 FP9001 5 FP9001 3
M26 IS SAB0 P M25 IS SAB0 M M24 IS SAB1 P M23 IS SAB1 M N26 IS SACK P N25 IS SACK M N24 IS SAB2 P N23 IS SAB2 M P26 IS SAB3 P P25 IS SAB3 M CL6005 CL6006 K25 J26 IS0 HD IS0 VD MOS SSG
GPIO61
(IS DLOP0) (IS DLON0) (IS DLOP1) (IS DLON1) (IS DLCKP) (IS DLCKN) (IS DLOP2) (IS DLON2) (IS DLOP3) (IS DLON3)
GPIO16
LCD
GPIO56 AF10
(LCD TP RST)
SDRAM AREA/4G-bit
IC7201
(DC-DC CONVERTER) 11 VINA 12 VINP VMID 3 VO2 9 SWIRE 7 1 LX1 PGND 2 FD 4 AGND 5 GND 11 CL7202 EL VDD EL VSS EL ON
IC9307
PRE PROCESS BLOCK (FPGA)
(LCD POWER)
8 EN
J24 IS0 SDO L26 IS1 CS C11 AD0 IN2 YC PROCESS BLOCK JPEG PROCESS BLOCK VIDEO OUTPUT BLOCK
IC9310
(LVF DRIVER) 9 +IN2 -IN2 10 VOUT2 11 VOUT1 -IN1 +VS GND -VS 1 2 12 T1 4 GREEN FP9302 20 BLUE FP9302 21 PW A3.3V
G12 PR6A N14 PR14B PT17A A7 PL6A F1 PB6B P4 PB6A N3 PL7D H2 PL10B J2 PL10A J1 PL9B H3 PT24D A13
FL2001 1 2 3 4 5 6 7 8 (G HDMI D2+) (G HDMI D2-) FL2002 1 2 3 4 (G HDMI D1+) (G HDMI D1-) (G HDMI D0+) (G HDMI D0-) (G HDMI CK+) (G HDMI CK-) (HDMI CEC) (S HDMI SCL) (S HDMI SDA) (HDMI HPD) U1 T1 R1 P1 N1 M1 L1 K1 AD8 AE7 AF7 AD9 HDMI TX2P HDMI TX2M HDMI TX1P HDMI TX1M HDMI TX0P HDMI TX0M HDMI TXCP HDMI TXCM HDMI CEC HDMI SCL HDMI SDA HDMI HPD GPIO45 AB18 INTERNAL BUS CONTROL GPIO47 AB16 IS SB8CCK P U26 PB9B M5 PT19A C9 (S I2C SCK) (S I2C SDIO) (PHOTO IC OUT) (VCATH PWM) (VCATH EN) C8 PT18C A11 PT22A B8 PT18D
HDMI TERMINAL
IC9311
(LVF DRIVER) VOUT1 1 -IN1 2 +VS 12 GND T1 -VS 4 PW A3.3V RED FP9302 19
PW D3.0V 6 5 4 USB I/F 1 P9201 (SD CARD CONNECTOR) VDD VDD D0 D1 D2 D3 CMD CLK C.DET WP 6 4A 4B 7 8 9 1 2 5 10 12 RL6008 CL9202 RL6009 (PW SD3018V) Y20 VDD SD AA22 VDD SD 2 3
LVF
SCL FP9302 32,33 ENDI FP9302 31 UD FP9302 30 LR FP9302 29 PDN FP9302 28 VSY FP9302 27 HSY FP9302 26 PCLK FP9302 25 TSENSP FP9302 17 TSENSN FP9302 18 VCATH FP9302 12 (OPTICAL SENSOR) 8 SCL 7 SDA 4 VOUT 1 LEDA
Q9201
CL9201
IC9102
QR9201
VIDEOOUT (BUS49 SDDAT0) (BUS49 SDDAT1) (BUS49 SDDAT2) (BUS49 SDDAT3) (BUS49 SDCMD) (CLK49 SDSLK) AA26 AA25 AB25 AB24 AB23 AB26 (SDCD SYS) (SDWP) SD DAT0 SD DAT1 SD DAT2 SD DAT3 SD CMD SD CLK (G VIDEO OUT) A8 RL9103 GPIO0 AD23 RL9110 AUD MCLK AE9 SD CORE RL9104 AUD DCLK AF9 RL9109 AUD DIN AE8 RL9106 AUD DOUT AE10 RL9105 AUD FCLK AF8 RSTB RL9124 AC12 (SYS RESET) (EVF RESET) 54 RESETOUT 87 PIOC2 (AUD WS) (AUD DOUT) 34 4 DA IN PIOB7 84 6 LRCLK 33 CC9301 (FPGA CDONE) (AUD DIN) 4 ADOUT 29 7 SDA (CLK 27AUD) (AUD MCLK) 4 MCLKO 30 (AUD CLK) 4 BCLK 32 PIOC1 86 36 V IN 4 MCLK 31 (LCD POWER) (SYSTEM IC)
IC9312
(TEMPERATURE SENSOR) 8 SCL DXP 2 DXN 3 GND 5
(SDCD)
11
CL9307 SCL FP9302 4 SDA FP9302 5 VOUT FP9302 3 LED ANODE FP9302 1,2
PT19B A9
QR9202
IC9313
(OP AMP) 3 VIN+ VOUT 1 VIN- 4 5 VDD VSS 2
IC9201
(REGULATOR) 1 VOUT VIN 4 2 GND VCNT 3 PW D3.0V
IC9309
(DC-DC INVERTER) CL9309 4 EN 3 VIN 5 IN SW OUT FB GND 6 8 9 2
IC9315
(REGULATOR) 1 VOUT VIN 4 2 VSS CE 3 PW D3.5V
PW A3.3V
71
IC4501 IC6001
(VENUS ENGINE) (DAC&HP AMP)
Wi-Fi BG FPC
Wi-Fi P.C.B.
LRCK 3 BICK 2 SDATA 1 AUDIO INTERFACE LOUT 13
IS SB10DCK P V26 IS SB10DCK M V25 IS SBCD11 P V24 IS SBCD11 M V23 IS SBCD9 M U23 IS SBCD9 P U24
(WIFI DAT0) (WIFI DAT1) (WIFI DAT2) (WIFI DAT3) (WIFI CMD) (WIFI CLK)
IC9001
(REGULATOR) CL9011 PW D3.5V 4 VIN VOUT 1
PW D3.5V PW D3.0V
FP9004 38 FP9004 41 FP9004 40 FP9004 39 FP9004 42 FP9004 44 FP9004 36 FP9004 32 FP9004 35 FP9004 33,34
(SDIO D0) (SDIO D1) (SDIO D2) (SDIO D3) (SD CMD) (SD CLK) (RESETn) (VBAT) (VIO) (PAVDD)
24 23 4
HDP AMP
MUTE
HPL
HEADPHONES TERMINAL
CSN
VCOM
VCOM
15
JK2001 USBUSB+ VIDEO OUT LINE OUT L CABLE DET USB CAB IN A GND
IC9102
(SYSTEM IC) (WIFI RESET) (G LINE OUT L) (G LINE OUT R) (HP AMP PDN) (G VIDEO OUT) (AV CAB DET) (USB CAB DET) CL9102 SPPOS 73 CL9103 SPNEG 76 (G SP POG) (G SP NEG) FP9300 5,6 FP9300 7,8 CL4502
AV OUT/DIGITAL TERMINAL
QR2001
MR1 SW FPC
SPEAKER
RL4405
BUS SW
MICINR2 102
CL9108
QR9101
CL9002
IC9104
(REGULATOR) PIOC3 88 PW D4.5V 1 CNT VOUT 3 4 VDD CL9104
Q9102
PW EXMIC3.5V CL9110
Q9101 QR9102
CL9106
MIC UNIT
(G MIC LIN) FP9005 5 FP9005 6 FP9005 4 FP9005 3 CL9107 (MIC L IN) (MIC GND) (MIC R IN) (MIC GND)
+ + -
ECM(L)
(G MIC RIN)
ECM(R)
(ST-GUN SW) (EXTMIC ON) (EXT MIC DET) (NO GUN DET)
72
Q8002
(XSINGLE)
GPIO44 AB19
(EXSTB OUT)
QR8001
Q8001
(XBURST) (XBRACKET)
(XSELF)
INTSTB POPUP SW
INT STB DET (INT STB DET) (INT STB DET) FP9005 1 FP9005 2 FP9005 22 FP4401 9 FP4401 10
GPIO79 W1
CC9012
(D GND)
GPIO56 AF10
(SSG AESTART)
IC9102
(SYSTEM IC)
PW D3.0V
Q9003
EXT STB TRG 15 PIOD3 112 PIOC5 90 (EXT STB TRG) (EXT STB DET) (EXT STRTTL)
CC9011
FLASH P.C.B.
T8501
(C+) (C-)
CAPACITOR P.C.B.
P8501 2 P8501 1
PIOD5 114
Q8502
RL8505,8506
GPIO55 AE11
IC9101
(SINGLE COMPARATOR)
FP9002 FP8501 22 23
Q8503
1 PWM IN 52 4 3 GPIO54 AF11 AD1 IN4 A13 (STB PWM) (STB CHG LVL) PW A3.1V PW D3.5V FP9002 FP8501 21 22 5 4 5 3 2 1 3 2 1 6 7 8
P8502 1 P8502 2
FLASH UNIT
Q8501
4 FLASH
Q8504
(INT STB TRG) FP9002 FP8501 20 21 (INT STB TRG)
73
TO BATTERY
IC1901
(AND GATE IC) 5 1 2 (BAT1 SEL) (BAT2 ON)
IC1001
(7CH SW REGULATOR)
IC1081
(REGULATOR)
PW D3.0V
Q1903
Q1907
VO1
1 CE
VIN 4 CL1802
62 63 64 59 60
PW M1.8V
Wi-Fi BG FPC
BATTERY DRIP TERMINAL
ERROR AMP1
VREGD DRIVER
VO2
5 HVREG DRIVER CH2 STEP DOWN DC/DC (Current mode) VREGD DRIVER
57
Q9002
58 Lx2
Q9001
56 PGND2 Hx3
ERROR AMP2
VO3
6
Vo3SEL
IC1902
(BAT2 THERMO) 1 (VG KEY IN) 2 3 (AND GATE IC) 5 1 2 (BAT1 ON) (BAT2 SEL) ERROR AMP3
HVREG DRIVER CH3 STEP DOWN DC/DC (Current mode) VREGD DRIVER
54
QR9002
Lx3 PGND3 PGND3 Hx4 Hx4 Lx4 PGND4 Hx5 Hx5 Lx5 Lx5 PGND5 PGND5 Hx6 Hx6 Lx6 Lx6 PGND6 PGND6 Lx7 PGND7 VO7
SOFT START VOUT RAMP CONTROL CURRENT LIMIT COMP. SAWTOOTH GENERATOR 2.25MHz OSC FB 3 CL1051 2 4
55 52 53
QR9001
VO4
SERIAL I/F
IC1071
(STEP DOWN CONVERTER) 5 VIN EN THERMAL SHUTDOWN REFERENCE 0.6V VREF UNDERVOLTAGE LOCKOUT 1.8V CURRENT LIMIT COMP. LIMIT HIGH SIDE GATE DRIVER ANTISHOOTTHROUGH LIMIT LOW SIDE LX 1 PW D1.8V
Q1908
(VG ON DET)
49 50 51 48 44
Q1906
Q1910
VREGD DRIVER
VO5
MODE
45 46 47 42 43
IC9102
(SYSTEM IC) (PW UNREG SYS) PIOD0 109 PIOD1 110 50 POWERSWONL CL9101 EV3 45
VO6
SERIAL I/F
ERROR AMP5
IC9103
(REGULATOR) 1 VIN CE 6 ERROR AMP6
38 39 40 41 36 37
PFM COMP. +1% VOLTAGE POSITIONING FB VREF CONT. +1% ERROR PWM STAGE GND 6 AMP COMP. VREF
CL1071
ON
2 NC VSS 5 3 VOUT NC 4
INV7
FLASH P.C.B.
B8531 BACKUP BATTERY FP8501 FP9002 1 1 (BACK BAT+) 40 BATT
RL9125 (POWER CTL SW) POWER 55 CTL SW (IS PWR ON3) PIOB5 82
CL1002
VREGD DRIVER
35 34 33
0.3V
SERIAL I/F
ERROR AMP7
IC1051
(REGULATOR) 4 VIN VOUT 1
PW A3.1V
SHUTDOWN
IC9305
(REGULATOR) 4 VDD VOUT 1 CL9306 PW A3.3V CL1401 3 CNT GND 2 CL1801 PW HDMI5V PW D3.5V
SS TIMER
To FP9001-40
OVPCOMP PROTECTION
PIOA7 65
IC6001
(VENUS ENGINE) RL9119 (POWER SW IN) IS SB8CCK M U25 RL9124
PIOD4 113
SCP6 TIMER
UVLO 30 LDO 31 22 10 VREGD2 28 25 VINREG VINREG REGOUT VDD VREGD2IN HVREG CPLUS
VBAT VBAT
3 CE VSS 2
SCP TIMER
CL1003
IC9034
(REGULATOR) 4 VDD VOUT 1 6 5 4 3 CNT GND 2 CL9305 PW A2.5V
RSTB AC12 AD1 IN2 C14 AD0 IN5 B10 GPIO62 AA23 AD0 IN0 A11 GPIO45 AB18 GPIO47 AB16 GPIO81 V3 GPIO82 V2 GPIO83 V1 GPIO80 V4 AD0 IN1 B11
(SYS RESET) (VG KEY IN) (BAT2 THERMO) (POWER ON H) (SW UNREG) (S I2C SCK) (S I2C SDIO) (BAT2 SEL) (BAT1 ON) (BAT2 ON) (BAT1 SEL) (BAT THERMO)
54 RESETOUT
CP SW 13 14 16 17 18 19 SERIAL I/F 12 SEQ VO3SEL 11 RT VREGA OSC VREGD 21 VREGD2 26 29 VREGA 27 VREGD ON/OFF LOGIC SCPLDO TIMER CP DRIVER VREGD CP SW
23 2 3 24 1 20
QR1701
1 2 3
IC9314
(REGULATOR) 4 VDD VOUT 1 3 CNT GND 2 CL9304 PW A2.85V
Q1701
3 2 1 4 5 6 1 2 3
Q1702
6 5 4 CL1701 PW -1.1V
74
SPEAKER
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45
MIC UNIT
STEREO MICROPHONE
1 2 3 4 5
INTERCONNECTION DIAGRAM
HINGE FPC
FP7203 41 GND 40 OTPV 39 VCCIO1 38 RESETB 37 CSB 36 SCL 35 SDI 34 GND 33 VSYNC 32 HSYNC 31 GND 30 DOTCLK 29 GND 28 DB7 (Y7) 27 DB6 (Y6) 26 DB5 (Y5) 25 DB4 (Y4) 24 DB3 (Y3) 23 DB2 (Y2) 22 DB1 (Y1) 21 DB0 (Y0) 20 DB15(Cb7/Cr7) 19 DB14(Cb6/Cr6) 18 DB13(Cb5/Cr5) 17 DB12(Cb4/Cr4) 16 DB11(Cb3/Cr3) 15 DB10(Cb2/Cr2) 14 DB9(Cb1/Cr1) 13 DB8(Cb0/Cr0) 12 GND 11 EL ON 10 VCCIO2 9 VCI 8 VCI 7 GND 6 EL VSS(-4.9V) 5 EL VSS(-4.9V) 4 NC 3 EL VDD(4.6V) 2 EL VDD(4.6V) 1 GND
RL4408
RL4407
FP4401 10 SOL PWR(D3R0V) 9 SOL DRV 8 EXT MIC DET 7 EXT MIC GND 6 EXT MIC GND 5 EXT MIC CINA 4 EXT MIC RINA 3 EXT MIC LINA 2 NO GUN DET 1 PW EXMIC3R5V
HOT SHOE
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 X LVF LCD ON D GND G SP POS G SP NEG D GND D3R0V X MR2 SIG GND TPANEL SDA TPANEL REQ OTPV RESETB SCL GND HSYNC DOTCLK DB7 (Y7) DB5 (Y5) DB3 (Y3) DB1 (Y1) DB15 (Cb7/Cr7) DB13 (Cb5/Cr5) DB11 (Cb3/Cr3) DB9 (Cb1/Cr1) LCD POWER VCI RW D3R5V RW D3R5V LCD ROTATE2 GND 2 1
FP9300 X PLAY ON 2 D GND 4 G SP POS 6 G SP NEG 8 D GND 10 D3R0V 12 X MR1 SIG 14 GND 16 GND 18 TPANEL SCK 20 GND 22 VCCIO1 24 CSB 26 SDI 28 VSYNC 30 GND 32 GND 34 DB6 (Y6) 36 DB4 (Y4) 38 DB2 (Y2) 40 DB0 (Y0) 42 DB14 (Cb6/Cr6) 44 DB12 (Cb4/Cr4) 46 DB10 (Cb2/Cr2) 48 DB8 (Cb0/Cr0) 50 VCCIO2 52 VCI 54 RW D3R5V 56 RW D3R5V 58 GND 60 GND
FP9005 39 XSELF 37 XBURST 35 D GND 33 NO GUN DET 31 EXT MIC RINA 29 EXT MIC GND 27 EXT MIC DET 25 SOL DRV 23 SOL PW (D 3V) 21 POP UP DET 19 STRXD 17 (N.C.) 15 (N.C.) 13 STX 11 STX 9 (N.C.) 7 (N.C.) 5 MIC L IN 3 MIC GND 1 INT STB DET
P9003 STX2 NC
SHUTTER FPC
(SHUTTER)
75
SENSOR IF FPC SENSORS P.C.B. MOUNT BOX UNIT
LVF UNIT
LENS UNIT
(SSWF) (LENS CONTACT)
FP9001 1 GND 2 3 IS THERMO 4 5 IS RESET 6 7 S IS CS 8 9 S IS SCK 10 11 IS VD 12 13 GND 14 15 PW IS D1R2V 16 17 PW IS D1R2V 18 19 GND 20 21 PW IS D1R8V 22 23 GND 24 25 IS DLON0 26 27 IS DLOP1 28 29 GND 30 31 IS DLCKN 32 33 IS DLOP2 34 35 GND 36 37 IS DLON3 38 39 GND 40 41 PW -1R1V 42 43 PW D3R0V 44 45 GND 46 47 PW D3R5V 48 49 PW D3R5V 50 51 GND
GND GND GND S IS SDO IS HD GND PW IS D1R2V PW IS D1R2V GND PW IS D1R8V GND IS DLOP0 GND IS DLON1 IS DLCKP GND IS DLON2 IS DLOP3 GND IS PWR ON3 PW D3R0V PW D3R0V GND PW D3R5V PW D3R5V
32 SCL 30 UD 28 PDN 26 HSY 24 VSS (GND) 22 I2CADR 20 GREEN (DAC1) 18 TSENSN 16 SDA 14 VSS (GND) 12 VCATH 10 VCC (D3R0V) 8 D GND 6 VCC (D3R0V) 4 SCL 2 LED ANODE
FP9302 33 SCL 31 ENDI 29 LR 27 VSY 25 PCLK 23 VDD(PW A2R85V) 21 BLUE (DAC2) 19 RED (DAC3) 17 TSENSP 15 VDDA(PW A2R5V) 13 VDDS(PW A3R3V) 11 VCC (D3R0V) 9 D GND 7 VCC (D3R0V) 5 SDA 3 VOUT(H/L OUTPUT) 1 LED ANODE
RL8511
RL8512
FP9009 1 3 5 7 9 11 13 15 17 19 21 23 LSLDP LSCK LSL2B LSRST GND GND GND GND LEN4R2V LEN4R2V LEN4R2V LEN4R2V 2 4 6 8 10 12 14 16 18 20 22 LSB2A LSDIO LSB2L LSDET GND GND GND GND LEN4R2V LEN4R2V LEN4R2V
5 4 3 2 1
FP9003 UNREG GND UNREG GND UNREG GND SSWF OUT SSWF OUT
38 UNREG 36 UNREG 34 UNREG 32 NC 30 UNREG GND 28 UNREG GND 26 UNREG GND 24 UNREG GND 22 D3R5V 20 D GND 18 POWER ON L 16 MODE DIAL0 14 LED PWR OUT 12 D 4R8V 10 CMD DIALF0 8 SHUTTER FULL 6 CMD DIALR0 4 AV KEY DET 2 (N.C.)
FP8501 39 UNREG 37 UNREG 35 UNREG 33 UNREG 31 UNREG GND 29 UNREG GND 27 UNREG GND 25 STB PWN OUT 23 STB CHG LVL 21 INT STB TRG 19 AFLED CATHODE 17 MODE DIAL1 15 TOP KEYIN 13 D 3V 11 LED WIF OUT 9 CMD DIALF1 7 SHUTTER HALF 5 CMD DIALR1 3 D GND 1 BACK BAT+
FP8503
MAIN-FLASH FPC
FP9004
1 VG KEYIN 3 SHUTTER1 5 CMD DIAL VF0 7 VG DET 9 BIAS1 11 BAT2 THERMO 13 UNREG 15 UNREG 17 UNREG 19 UNREG 21 P GND 23 P GND 25 P GND 27 P GND 29 BG COVER DET 31 SWUNREG2(BAT2 AD) 33 PAVDD(3.0V or 2.85V) 35 VIO (3.0V) 37 GND 39 SDIO D3 41 SDIO D1 43 GND 45 GND
2 CMD DIAL VR1 4 SHUTTER0 6 CMD DIAL VR0 8 VG ON DET 10 CMD DIAL VF1 12 UNREG 14 UNREG 16 UNREG 18 UNREG 20 NC 22 P GND 24 P GND 26 P GND 28 P GND 30 BIAS2 32 VBAT (D3.5V) 34 PAVDD(3.0V or 2.85V) 36 RESETN 38 SDIO D0 40 SDIO D2 42 SD CMD 44 SD CLK
38 UNREG 36 UNREG 34 UNREG 32 NC 30 UNREG GND 28 UNREG GND 26 UNREG GND 24 STB PWN OUT 22 STB CHG LVL 20 INT STB TRG 18 AFLED CATHODE 16 MODE DIAL1 14 TOP KEYIN 12 D 3V 10 LED WIF OUT 8 CMD DIALF1 6 SHUTTER HALF 4 CMD DIALR1 2 D GND
FP9002 39 UNREG 37 UNREG 35 UNREG 33 UNREG 31 UNREG GND 29 UNREG GND 27 UNREG GND 25 UNREG GND 23 UNREG GND 21 D3R5V 19 D GND 17 POWER ON L 15 MODE DIAL0 13 LED PWR OUT 11 D 4R5V 9 CMD DIALF0 7 SHUTTER FULL 5 CMD DIALR0 3 REMOTE 1 BACK BAT+
1 AFLED CATHODE 2 D3R0V 3 POWER ON L 4 D GND 5 MODE DIAL1 6 MODE DIAL0 7 LED WIFI OUT 8 D4R8V 9 LED PWR OUT 10 LED VCC(D3R0V) 11 FN1 ON L 12 EXPO ON L 13 ISO ON L 14 WB ON L
Wi-Fi BG FPC
CC1903
FP8504
4 3 2 1
BATTERY
CC1902 CC1901
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
FP9010 AF DIAL0 AF DIAL1 FN2 ON L FN3 ON L GND REC ON L AF AE LOCK CMD DIALT0 DISP ON L GND UP ON L CMD DIALT1 SET ON L LEFT ON L GND DOWN ON L RIGHT ON L DEL ON L
FP8502 1 D GND 2 CMD DIALF1 3 CMD DIALF0 4 SHUTTER HALF 5 SHUTTER FULL 6 D GND 2
EXT MIC
LCD IF
FLASH
MR1 SW FPC
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
F1J1A106A024 F1G1A104A012 F1H1A105A025 F1G0J1050007 F1H1A4750004 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1H1A105A025 F1G0J1050007 F1H1A4750004 F1H1A4750004 F1H1A4750004 F1H1A105A025 F1H1A105A025 F1J1A106A024 F1J1A106A024 F1G1H220A557 F1G1A1040006 F1H1A105A025 F1H1A105A025 F1J1A106A024 F1J0J2260004 F1J1A106A024 F1J1A106A024 F1J1A106A024 F1J1A106A024 F1J0J2260004 F1J1A106A024 F1G1E102A086 F1H0J4750005 F1G1E102A086 F1G1A1040006 F1G1E102A086 F1G1E102A086 F1G1A1040006 F1G0J1050007 F1G1A1040006 F1G1A1040006 F1G1H4710004 F1G1H4710004 F1G1H4710004 F1H0J4750004 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1G1H100A565 F1G0J1050007 F1G0J1050007 F1G0J1050007 F1H0J1060009 F1G1H100A565 F1H1E104A029 F1H1E104A029 F1G1H100A565 F1G1H4710004 F1G1H4710004 F1G1H4710004
Remarks
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
F1G0J1050007 F1G1H101A565 F1G0J1050007 F1G1A1040006 F1G0J1050007 F1G1A1040006 F3E0J106A026 F1G1A1040006 F3F0J107A087 F3E0J106A026 F3F0J107A087 F1H0J1060009 F1G1A1040006 F1J1A106A024 F1G1C1030008 F1J1A106A024 F1J1A106A024 F1H1A105A025 F1G1H3310003 F1G1A1040006 F1G1C1030008 F1G1C1030008 F1G1C1030008 F1G1C1030008 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1G1C1030008 F1G1C1030008 F1G1A1040006 F1G1C1030008 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1G1C1030008 F1G0J1050007 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1G1H100A565 F1G1H100A565 F1G1C1030008 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1G1C1030008 F1J1A106A024 F1H1A4750004 F1H1A4750004 F1J1A106A024 F1J1A106A024 F1J1A106A024 F1G1A1040006 F1G1A1040006
Remarks
CH 10V 0.1U
CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH
6.3V 10U 10V 0.1U 10V 10U 16V 0.01U 10V 10U 10V 10U 10V 1U 50V 330P 10V 0.1U 16V 0.01U 16V 0.01U 16V 0.01U 16V 0.01U 10V 10U 10V 0.1U 10V 0.1U 10V 0.1U 16V 0.01U 16V 0.01U 10V 0.1U 16V 0.01U 10V 0.1U 10V 0.1U 10V 0.1U 10V 0.1U 10V 0.1U 10V 10U 10V 0.1U 10V 0.1U 16V 0.01U 6.3V 1U 10V 0.1U 10V 0.1U 10V 0.1U 10V 0.1U 50V 10P 50V 10P 16V 0.01U 10V 0.1U 10V 10U 10V 0.1U 10V 0.1U 16V 0.01U 10V 10U 10V 4.7U 10V 4.7U 10V 10U 10V 10U 10V 10U 10V 0.1U 10V 0.1U
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
F1H0J4750004 F1H1E105A144 F1G1E102A086 F1G1C1030008 F1K2J333A029 F1K2E2230002 F1K2J102A028 F1H1A105A025 F1J1A106A043 F1G1H101A565 F5A42102A013 F1G1E102A086 F1G1A1040006 F1H1A105A025 F1H1A105A025 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1H1A105A025 F1G1H101A565 F1H1A105A025 F1J1A106A024 F1H1A4750004 F1G0J1050007 F1G1A1040006 F1H1A4750004 F1G1A1040006 F1G0J1050007 F1G1H120A565 F1G1H120A565 F1J1A106A024 F1J1A106A024 F1G0J1050007 F1G0J1050007 F1G1A1040006 F1G0J1050007 F1J1A106A024 F1J1A106A024 F1G0J1050007 F1G0J1050007 F1J1A106A024 F1G1H272A571 F1G1H272A571 F1J1A106A024 F1H1A105A025 F1G0J1050007 F1G0J1050007 F1H1A105A025
Remarks
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 E.S.D.
Part No.
F1H1A105A025 F1J1A106A024 F1J1A106A024 F3E0J106A026 F3E0J106A026 F1J1A106A024 F1G1C1030008 F1H0J1060009 F1H1A105A025 F1H1A105A025 F1G1H100A565 F1G1H100A565 F1G1H100A565 F1G1H100A565 F1G1A1040006 F1G1E472A086 F1J1A106A024 F1H1A4750004 F1H1A4750004 F1H1A105A025 F1H1A105A025 F1H1A105A025 F1H1A105A025 F1H1A105A025 F1H1A105A025 F1H1A4750004 F1H1A4750004 F1J1A106A024 F1G1H1020008 F1G1A1040006 F1H1A4750004 F1H1A4750004 F1G1A1040006 F1G0J1050007 F1G0J1050007 F1G1A1040006 F1G1A1040006 F1G1A1040006 F1J1A106A024 F1G1A1040006 F1J1A106A024 F1G1H100A565 F1G1H221A571 F1G1H1020008 F1H1A4750004 F1H1A4750004 F1H1A4750004 F1H1A4750004 F1J0J2260004 F1J0J2260004 F1J1A106A024 F1H0J4750005 F1G1C104A077 F1G1C1030008 F1L1E103A065 F1L1E103A065 F1L1E103A065 F1L1E103A065 F5A84104A021 F5A84104A021 F5A84104A021 B0JCGD000016
Remarks
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D.
Part No.
B0JDDD000007 B0JCMD000066 B0JCPG000032 B0JCPG000032 B0JCCD000003 DB2S31100L B0BC6R8A0169 B0BC6R8A0169 B0JCGD000016 B0BC8R2A0266 B2ABAP000006 B0ECGP000006 B0HCMP000006 DA2JF8100L B2BBDR000004 B0BD6R800011 B0JCCD000003 B0BD6R800011 B0JCFC000004 B0JCCD000003 B0JCFC000004 ERBRE0R50V ERBRE2R50V K5H1522A0018 K5H1522A0018 EXC28CH900U EXC28CH900U K1MN10BA0108 K1MY45BA0575 K1MY06BA0370 K1MY41BA0575 K1MN05BA0108 K1MY39BA0575 K1MY06BA0370 K1MY14BA0370 K1MY04BA0370 K1MY51BA0575 K1MY39BA0575 K1MN05BA0108 K1MY45BA0575 K1MY39BA0575 K1MY19BA0235 K1MY23BA0575 K1MY18BA0370 K1MY61BA0575 K1MY33BA0235 C1ZBZ0004634 C0DBGYY02024 C0DBAYY01512 C0DBGYY02122 C0JBAA000393 C0JBAA000393 L2EZ00000004 C0JBAE000321 C0BBAA000008 C0ABCA000141 C1AB00003981 VSG1015 C0JBAB001059 N0BB2BB00001 C0DBGYY02518 C0CBCYY00070
Remarks
E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. [SPC] E.S.D. E.S.D. E.S.D. E.S.D.
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D.
Part No.
C0BBAA000008 C1AB00003646 C0DBGYY02368 C0DBGYY02170 C0JBAR000626 C0JBAR000626 C0DBGYY00779 C0CBCYY00086 C1ZBZ0004831 C0DBAYY01514 C0ABBA000298 C0ABBA000298 C0ZBZ0002037 C0ABGA000104 C0CBCYY00077 C0CBCYY00086 AN41400A-PB RS10373 K1FB108E0008 K2HC106E0009 K1FA119E0022 K2HC106E0009 K2HD104D0002 G1C100MA0461 G1C4R7MA0024 G1C150MA0477 G1C100MA0328 G1C150MA0477 G1C4R7MA0477 G1C4R7MA0450 J0ZZB0000142 G1C4R7MA0584 G1C100MA0584 G1C1R0MA0172 G1C4R7MA0392 J0JGC0000038 J0JBC0000107 J0JBC0000107 J0JBC0000107 J0JBC0000107 J0JBC0000107 J0JBC0000107 J0JBC0000107 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JCC0000408 J0JHC0000032 J0JHC0000032 K1KA02B00292 K1KA02ZA0001 K1KA02BA0014 K1NA09E00153 B1HDCFA00004 B1HFCFA00005 FK3503010L B1CHPB000008 FK3503010L
Remarks
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D. E.S.D.
Part No.
FK3503010L B1CHPB000008 B1CHPB000008 FK3503010L FK3503010L B1ABDF000017 FK3503010L B1ABCF000103 B1JBLP000037 B1CFQG000003 DMG904010R DSC300100L B1CFQC000004 B1CFQC000004 B1CFJD000006 B1ABDF000017 B1ABDF000017 B1CHMB000007 B1MBCGA00004 B1HBCFA00034 B1GKCFGN0003 B1GBCFNL0020 B1GBCFJJ0064 B1GBCFJJ0064 B1GKCFEN0001 B1GBCFGA0030 B1GBCFNN0015 B1GBCFNN0015 B1GDCFNN0033 B1GBCFNL0020 B1GBCFNL0020 B1GBCFJJ0064 B1GDCFGN0024 ERJ2RHD473X D0GA102JA023 D0GA102JA023 D0GA102JA023 D0GA103JA023 ERJ2RKD364X ERJ2RKD184X ERJ2RHD512X ERJ2RKF1541X D0GA332JA023 D0GA393JA023 D0GA393JA023 D0GA393JA023 ERJ2RKD684X ERJ2RKD304X D0GA105JA023 D0GA474JA023 D0GA474JA023 D0GA473JA023 D0GA105JA023 D0GA104JA023 D0GA474JA023 D0GA474JA023 D0GA104JA023 D0GA104JA023 D0GA104JA023 D0GA102JA023 D0GA561JA023 D0GA273JA023
Remarks
47K
680K 300K
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EG,EC,EF,EB 1 1 1
Part No.
D0GA750JA023 D0GA682JA023 D0GA102JA023 D0GA202JA023 D0GA202JA023 D0HB562ZA002 D0HB562ZA002 D0HB562ZA002 D0HB331ZA002 D0GA473JA023 D0HB223ZA002 D0HB223ZA002 D0GA102JA023 D0GA223JA023 D0GA222JA023 D0GA222JA023 D0GA222JA023 D0GA153JA023 D0GA153JA023 D0GA153JA023 D0GA102JA023 D0GAR00J0005 ERJ2RHD683X ERJ2RHD113X D0GA101JA023 D0GA153JA023 D0GA104JA023 D0GA104JA023 D0GA104JA023 D0GA100JA023 D0GA100JA023 D0GA100JA023 ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD511X ERJ2RHD561X ERJ2RHD222X ERJ2RHD122X ERJ2RKF1183X ERJ2RKF2800X ERJ2RHD241X D0GA103JA023 ERJ2RKF6201X D0GA681JA023 D0GA105JA023 D0GA473JA023 D0GA470JA023 D0GA473JA023 ERJ2RHD103X D0GA101JA023 D0GA102JA023 ERJ2RKF1000X ERJ2RKF1000X ERJ2RKF1000X
Remarks
CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
510 510 510 510 510 510 510 510 510 510 510 560 2.2K 1.2K 118K 28 240
CH 1/16W 6.2K
CH 1/16W 10K
Parts List
Q'ty Remarks
Part No.
ERJ2RKF1000X ERJ2RKF1000X D0GA181JA023 D0GA150JA023 D0GA150JA023 ERJ2RHD511X ERJ2RHD511X ERJ2RKF2800X ERJ2RHD241X D0GA222JA023 D0GA222JA023 D0GA103JA023 D0GAR00J0005 D0GAR00J0005 D0GAR00J0005 D0GA223JA023 D0GA223JA023 D0GA103JA023 D0GA102JA023 ERJ6GEYJ106V ERJ6GEYJ106V ERJ8GEYJ104V D0GA104JA023 D0GA330JA023 D0GA680JA023 ERJ6RED914V ERJ6RED914V ERJ2RKD304X ERJ2RHD163X D0GA181JA023 D0GA153JA023 ERJ8GEYJ753V D0GA220JA023 ERJ8GEYJ472V D0GA103JA023 D0GA103JA023 D0GA392JA023 D0GA392JA023 D0GA103JA023 D0GA102JA023 D0GA330JA023 D0GA221JA023 D0GA103JA023 ERJ2RKD304X D0GA473JA023 D0GA473JA023 D0GA474JA023 D0GA104JA023 D0GA474JA023 D0GB8R2JA065 D0GB8R2JA065 D0GA105JA023 D0GA392JA023 D0GA392JA023 D0GA103JA023 D0GAR00J0005 D0GAR00J0005 D0GA472JA023 ERJ2RKD684X ERJ2RKD394X D0GA102JA023 ERJ2RHD223X
CH CH CH CH
CH 1/16W 300K
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PU,P,PC,EE,GC,GH,GT,GK,GN,GD 1 EG,EC,EF,EB 1 1 1 1 1
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
ERJ2RKD114X D0GA332JA023 D0GA101JA023 D0GA151JA023 D0GA471JA023 D0GA431JA023 D0GA103JA023 ERJ2RKD105X ERJ2RKD244X D0GA472JA023 D0GA472JA023 D0GA104JA023 D0GA330JA023 D0GA152JA023 D0GA152JA023 D0GA102JA023 D0GA102JA023 D0GA102JA023 D0GA822JA023 D0GA330JA023 D0GA330JA023 D0GA822JA023 ERA3YED392V ERA3YED392V D0GA470JA023 ERJ2RKD684X D0GA103JA023 ERJ2RKD304X D0GA104JA023 D0GA103JA023 D0GA103JA023 ERJ2RKF1780X ERJ2RKF1780X ERJ2RKF3160X ERJ2RKF3160X ERJ2RKF3160X ERJ2RHD104X ERJ2RKD100X ERJ2RKF7502X D0GA560JA023 D0GA560JA023 D0GA332JA023 D0GA103JA023 D0GA103JA023 D0GA222JA023 D0GA332JA023 D0GA103JA023 D0GA103JA023 D0GA103JA023 ERJ2RKD100X ERJ2RHD102X ERJ2RHD102X ERJ2RHD102X ERJ2RHD271X ERJ2RHD271X ERJ2RHD271X D0GA103JA023 D0GA680JA023 D0GA470JA023 D0GA680JA023 ERJ2RKF1780X ERJ2RKD100X
Remarks
CH CH CH CH CH CH CH CH
CH CH CH CH CH CH CH
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
ERJ2RKD100X ERJ2RHD104X D0GA101JA023 ERJ6GEYJ6R8V D0GA102JA023 D0GA102JA023 D0GA182JA023 D0GA182JA023 D1H81034A042 D1H81034A042 D1H81034A042 D1H84734A042 D1H81504A042 EXB28V181JX D1H81514A042 D1H81514A042 D1H81514A042 D1H81514A042 D1H83314A042 EXB24N202JX D1H81014A042 D1H81014A042 EXB28V392JX D1H81034A042 EXB28V392JX D1H81034A042 EXB28V392JX D1H81034A042 EXB28V392JX D1H81044A042 D1H81024A042 D1H81034A042 D1H81034A042 D1K10014A006 D1K10014A006 D1K10014A006 D1K10014A006 D1K10014A006 D1K10014A006 D1K49904A006 D1K49904A006 D1K49904A006 D1K49904A006 D1K49904A006 D1K49904A006 EXB28V472JX G5DYA0000143 G5DYZ0000028 D4ED18R00008 D4ED18R00008 D4ED1120A002 D4ED1120A002 D4ED18R00008 D4ED18R0A014 H0J240500053 H0J327200085
Remarks
Parts List
Q'ty Remarks
Part No.
VEP56171B VEP56171A
VGQ0P93
TAPE
3 4 5 6 7 7-1 7-2 8 9 10 12 13 14 15 16 17 17-1 17-2 18 19 20 21 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 44-1 44-2 45 45-1 45-2 45-5 45-7 46 47 48
VGQ1F66 VGU0M80 VKF5101 VYK6B41 VXQ2350 VMD6702 VMG2060 VYK6B42 VYK6B43 N5HBZ0000098 VGQ1F60 VGQ1L06 VKF5104 VWJ2369 VYF3508 VYK6J98 VKF5102 VKF5103 VYK6F54 K0RB01500003 L0AA01A00137 VEP50134A VGQ1F53 VGQ1F73 VGQ1F77 VGQ1L75 VGQ1L75 VGQ1F84 VGQ1F95 VGQ1J67 VGU0M72 VGU0M73 VGU0M74 VGU0M75 VGU0M76 VGU0M77 VGU0N08 VKM0C55 VKM0C56 VKW3535 VMB4668 VYF3509 VYK6J99 VGU0M78 VGU0M79 VYK6B48 VEP59122A VGQ1F96 VYK6B49 VKM0C58 VYK6F57 VGQ1F76 VGQ1J68
BG CONTACT HOLDER LVF DPT KNOB DC COVER HEAT RADIATION PLATE UNIT MOUNT BOX UNIT B MOUNT B MOUNT RING BATTERY CONTACT COVER UNIT EYE CUP UNIT Wi-Fi P.C.B. Wi-Fi HOLDER SHEET BG CONTACT COVER Wi-Fi BG FPC BATTERY DOOR UNIT FRONT CASE UNIT JACK COVER A JACK COVER B TRIPOD REAR OPERATION UNIT SPEAKER MR1 SW FPC UNIT SHEET A REAR BUTTON PACKING C HINGE FIX COVER REAR BUTTON PACKING D REAR BUTTON PACKING D REAR BUTTON PACKING B HINGE CUSHION 4 REAR CUSHION G [PLAYBACK] BUTTON [LVF]/[Fn5] BUTTON [DELETE/CANCEL]/[Fn4] BUTTON [DISP.] BUTTON [AUTO FOCUE MODE]/[Fn3] BUTTON [Q. MENU]/[Fn2] BUTTON MOTION PICTURE BUTTON HINGE ARM COVER BOTTOM HINGE ARM COVER TOP EYE SENSOR WINDOW LCD LOCK SPRING SD DOOR UNIT REAR CASE UNIT AF/AE LEVER [AF/AE LOCK] BUTTON LCD UNIT LCD IF P.C.B. LCD PACKING LCD HINGE UNIT LCD CASE BOTTOM LVF DPT BASE UNIT FPC TAPE LCD LOCK HOLDER
1 (RTL) E.S.D. EG,EC,EF,EB (RTL) E.S.D. PU,P,PC,EE,GC,GH,GT, G 1 K,GN,GD GH3EG,GH3P,GH3PC,GH3EC,GH3EF, GH3EB ,GH3EE,GH3GC,GH3GH,GH3GT, GH3GK,GH3 GN,GH3GD,GH3AEG,GH3AEF, GH3AEB,GH3A 1 GC,GH3AGH,GH3AGT, GH3HPU,GH3HEG,GH3 HEC,GH3HEF, GH3HEB,GH3HEE,GH3HGC,GH 3HGH, GH3HGT,GH3HGN,GH3HGD 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (RTL) E.S.D. 1 1 1 1 1 1
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
VGQ1J69 VGQ1K15 XUC12VW VYK6F59 VGQ1F98 VYK6B51 VYQ8074 VYK6B52 ML-421S/DN VEP58185A VKF5107 VEP54035A VKM0C63 L5ZZ00000173 VEP59123A VGQ0J40 VGQ0Q18 VGQ1H12 VGQ1K74 VGQ1L59 VYQ8075 VYK6F63 K4ZZ03000347 VGQ1G90 VGQ1M13 VKF5108 VGQ9405 VGQ9405 VEP50135A VGQ1F76 VHD1919 VHD1919 VHD1919 VHD1919 VHD2149 VHD2149 VHD2166 VHD2166 VHD2166 VHD2166 VHD2166 VHD2166 VHD2166 VHD2342 VHD2438 VHD2438 VHD2438 VHD2438 VHD2438 VHD2438 VHD2438 VHD2124 VHD2124 VHD2190 VHD2190 VHD2179 VHD2179 XQN14+BJ4FJK XQN16+B4FN XQN16+B4FN XQN16+B4FN VHD1924
Remarks
(ZB1901)
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
VHD2200-B VHD2200-B VHD2333 VHD2333 VHD2333 VHD2333 VHD2367 VHD2367 VHD2149 VHD2149 VHD2149 VHD2149 VHD2337 VHD2337 XQN14+BJ4FJK XQN14+BJ4FJK XQN14+BJ4FJK XQN14+BJ4FJK XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+B3FJ XQN16+BJ65FC XQN16+BJ65FC XQN16+B3FJ XQN16+B3FJ VHD2342 VHD2342 VHD2342 VHD2342 XQN16+BJ3FJK XQN16+BJ3FJK XQN14+BJ6FJK XQN16+B2FJ XQN16+B4FN XQN16+B4FN XQN16+B4FN XQN16+B4FN XQN16+B4FN XQN16+B4FN XQN16+BJ4FN VHD2149 VHD2149 VHD2342 VHD2438 XQN14+BJ4FJK XQN14+BJ4FJK VHD2436 VHD2459 VXW1447 P127HJ0 P12F010 P12F350 P12F320 P1279H0 P128H50 9630230 -----
Remarks
(GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)(NOT SUPPLIED)[SPC]
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
0242050 0242050 9580270 0B44035 0242070 0242070 0242070 0242070 0554020 0HF4025 0HF4025 0HF4025 0254035 0254035 0257060 0257060 0257060 0257060 VXW1042 P05F340 P05F020 P05C010 P057H00 P04F370 P04F370 P04F370 P0579H0 P058H50 9630060 --------0HF4025 0HF4025 0HF4025 0242100 0242100 0242100 0557025 0557025 9580270 0B44035 0257050 0257050 0257050 0257050 0257050 0254030 0254030 0254030 0554055 0554055 0554055 VPF1501 VKF4971 K1HY08YY0025 K2CQ2YY00082 K2CA2CA00025 K2CT3YY00034 K2CA2YY00129 K2CA2YY00130 K2CJ2YY00052 K2CR2YY00026
Remarks
(GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3A)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)(NOT SUPPLIED)[SPC] (GH3H)(NOT SUPPLIED)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3H)[SPC] (GH3) (GH3) (GH3) GH3EG,GH3EC,GH3EF,GH3EE,GH3GC GH3P,GH3PC GH3EB,GH3GC,GH3GH GH3GT GH3GK GH3GN GH3GD
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
VFC4908 VFF1067 VFF1066 VFF1068 VFF1069 VFF1070 VFF1074-C VFF1075-C ----VSK0794 VSK0793 VSK0795 VSK0796 VPK5445 VPK5444 VPK5446 VPN7493 VPN7494 VQT4M50 VQT4S38 VQT4S39 VQT4S40 VQT4S33 VQT4S34 VQT4S35 VQT4M49 VQT4S41 VQT4S42 VQT4S43 VQT4S44 VQT4M51 VQT4S45 VQT4S46 VQT4S47 VQT4S48 VQT4S49 VQT4S50 VQT4M55 VQT4M56 VQT4M57 VQT4M58 VQT4U63 VQT4U64 VPF1100 VQL2C67-2A VQL2C68-1A VQL2J61 VYF3522 VPF1501 VKF4971 K1HY08YY0025 K2CQ2YY00082 K2CT3YY00034 K2CA2YY00129 K2CA2YY00130 VFC4908 VFF1067 VFF1068 VFF1069 VFF1070 VFF1074-C
Remarks
(GH3) GH3EG,GH3EC,GH3EF,GH3EB GH3P,GH3PC GH3EE,GH3GC,GH3GH,GH3GN GH3GT,GH3GD GH3GK (EXCEPT GH3GK) GH3GK (GH3) GH3EG,GH3EC,GH3EF,GH3EB,GH3EE GH3P,GH3PC GH3GC,GH3GH,GH3GK,GH3GN,GH3GD GH3GT GH3EG,GH3EC,GH3EF,GH3EB,GH3EE, GH3G C,GH3GH,GH3GT,GH3GN,GH3GD GH3P,GH3PC GH3GK (GH3) (GH3) GH3EG,GH3EF GH3EG GH3EG GH3EG GH3P,GH3PC GH3P GH3PC GH3EC GH3EC GH3EC GH3EC GH3EC GH3EB GH3EE GH3EE GH3GC GH3GC GH3GC GH3GC GH3GT GH3GK GH3GN GH3GD GH3GH GH3GH (GH3) GH3PC GH3GT GH3GD (GH3) (GH3A) (GH3A) (GH3A) GH3AEG,GH3AEF,GH3AGC GH3AEB,GH3AGC,GH3AGH GH3AGT GH3AGK (GH3A) GH3AEG,GH3AEF,GH3AEB GH3AGC,GH3AGH GH3AGT GH3AGK (EXCEPT GH3AGK)
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Part No.
VFF1075-C ----VSK0794 VSK0795 VSK0796 VPK5449 VPK5450 VPN7496 VPN7497 VPN7499 VYC1084 VYF3480 VFC4605 VQT4M50 VQT4S38 VQT4S39 VQT4S40 VQT4M51 VQT4S47 VQT4S48 VQT4S49 VQT4S50 VQT4M55 VQT4M56 VQT4U63 VQT4U64 VPF1100 VQL2C68-1A VPF1318 VYF3522 VPF1501 VKF4971 K1HY08YY0025 K2CQ2YY00082 K2CA2CA00025 K2CT3YY00034 K2CA2YY00129 K2CA2YY00130 K2CJ2YY00052 K2CR2YY00026 VFC4908 VFF1067 VFF1066 VFF1068 VFF1069 VFF1070 VFF1074-C VFF1075-C ----VSK0794 VSK0793 VSK0795 VSK0796 VPK5453 VPK5454 VPN7496 VPN7497 VPN7500 VYC0997
Remarks
GH3AGK (GH3A) GH3AEG,GH3AEF,GH3AEB GH3AGC,GH3AGH,GH3AGK GH3AGT GH3AEG,GH3AEF,GH3AEB,GH3AGC, GH3AGH ,GH3AGT GH3AGK (GH3A) (GH3A) (GH3A) (GH3A)[SPC] (GH3A)[SPC] (GH3A) GH3AEG,GH3AEF GH3AEG GH3AEG GH3AEG GH3AEB GH3AGC GH3AGC GH3AGC GH3AGC GH3AGT GH3AGK GH3AGH GH3AGH (GH3A) GH3AGT (GH3A)[SPC] (GH3A) (GH3H) (GH3H) (GH3H) GH3HEG,GH3HEC,GH3HEF,GH3HEE,GH3HGC GH3HPU GH3HEB,GH3HGC,GH3HGH GH3HGT GH3HGK GH3HGN GH3HGD (GH3H) GH3HEG,GH3HEC,GH3HEF,GH3HEB GH3HPU GH3HEE,GH3HGC,GH3HGH,GH3HGN GH3HGT,GH3HGD GH3HGK (EXCEPT GH3HGK) GH3HGK (GH3H) GH3HEG,GH3HEC,GH3HEF,GH3HEB,GH3HEE GH3HPU GH3HGC,GH3HGH,GH3HGK,GH3HGN,GH3HGD GH3HGT GH3HPU,GH3HEG,GH3HEC,GH3HEF, GH3HEB ,GH3HEE,GH3HGC,GH3HGH, GH3HGT,GH3HG N,GH3HGD GH3HGK (GH3H) (GH3H) (GH3H) (GH3H)[SPC]
Parts List
Q'ty
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (GH3H) (GH3H)[SPC] (GH3H)[SPC] GH3HPU GH3HPU GH3HEG,GH3HEF GH3HEG GH3HEG GH3HEG GH3HEC GH3HEC GH3HEC GH3HEC GH3HEC GH3HEB GH3HEE GH3HEE GH3HGC GH3HGC GH3HGC GH3HGC GH3HGT GH3HGK GH3HGN GH3HGD GH3HGH GH3HGH (GH3H) GH3HGT GH3HGD (GH3H)[SPC] (GH3H)
Part No.
VPF1483 VYF3250 VFC4315 VQT4S36 VQT4S37 VQT4M50 VQT4S38 VQT4S39 VQT4S40 VQT4M49 VQT4S41 VQT4S42 VQT4S43 VQT4S44 VQT4M51 VQT4S45 VQT4S46 VQT4S47 VQT4S48 VQT4S49 VQT4S50 VQT4M55 VQT4M56 VQT4M57 VQT4M58 VQT4U63 VQT4U64 VPF1100 VQL2C68-1A VQL2J61 VPF1262 VYF3522
Remarks