You are on page 1of 10

74AC04, 74ACT04 Hex Inverter

74AC04, 74ACT04 Hex Inverter


Features
ICC reduced by 50% on 74AC only Outputs source/sink 24mA ACT04 has TTL-compatible inputs

September 2007
tm

General Description
The AC/ACT04 contains six inverters.

Ordering Information
Order Number
74AC04SC 74AC04SJ 74AC04MTC 74AC04PC 74ACT04SC 74ACT04MTC 74ACT04PC

Package Number
M14A M14D MTC14 N14A M14A MTC14 N14A

Package Description
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Device also available in Tape and Reel. Specify by appending suffix letter X to the ordering code. (PC not available in Tape and Reel.) All packages are lead free per JEDEC: J-STD-020B standard.

Connection Diagram

Logic Symbol
IEEE/IEC

Pin Description
Pin Names
An On

Description
Inputs Outputs

FACT is a trademark of Fairchild Semiconductor Corporation.


2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com

74AC04, 74ACT04 Hex Inverter

Absolute Maximum Ratings


Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Symbol
VCC IIK Supply Voltage DC Input Diode Current VI = 0.5V VI = VCC + 0.5V VI IOK DC Input Voltage DC Output Diode Current VO = 0.5V VO = VCC + 0.5V VO IO TSTG TJ DC Output Voltage

Parameter

Rating
0.5V to +7.0V 20mA +20mA 0.5V to VCC + 0.5V 20mA +20mA 0.5V to VCC + 0.5V 50mA 50mA 65C to +150C 140C

DC Output Source or Sink Current Storage Temperature Junction Temperature PDIP

ICC or IGND DC VCC or Ground Current per Output Pin

Recommended Operating Conditions


The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings.

Symbol
VCC Supply Voltage AC ACT VI VO TA V / t V / t Input Voltage Output Voltage Operating Temperature

Parameter

Rating
2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC 40C to +85C 125mV/ns 125mV/ns

Minimum Input Edge Rate, AC Devices: VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices: VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 2

74AC04, 74ACT04 Hex Inverter

DC Electrical Characteristics for AC


TA = +25C Symbol
VIH

TA = 40C to +85C Units


V 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.46 3.76 4.76 0.1 0.1 0.1 0.44 0.44 0.44 1.0 75 75 A mA mA A V V V

Parameter
Minimum HIGH Level Input Voltage

VCC (V)
3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5

Conditions
VOUT = 0.1V or VCC 0.1V VOUT = 0.1V or VCC 0.1V IOUT = 50A

Typ.
1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 2.1

Guaranteed Limits
3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86

VIL

Maximum LOW Level Input Voltage

VOH

Minimum HIGH Level Output Voltage

VIN = VIL or VIH: 3.0 4.5 5.5 VOL Maximum LOW Level Output Voltage 3.0 4.5 5.5 VIN = VIL or VIH 3.0 4.5 5.5 IIN
(3)

IOH = 12mA IOH = 24mA IOH = 24mA(1) 0.002 0.001 0.001 IOL= 12mA IOL = 24mA IOL = 24mA(1) VI = VCC, GND VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND IOUT = 50A

0.1 0.1 0.1 0.36 0.36 0.36 0.1

Maximum Input Leakage Current Minimum Dynamic Output Current(2) Maximum Quiescent Supply Current

5.5 5.5 5.5 5.5

IOLD IOHD ICC


(3)

2.0

20.0

Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 3

74AC04, 74ACT04 Hex Inverter

DC Electrical Characteristics for ACT


Symbol
VIH VIL VOH

Parameter
Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage

VCC (V)
4.5 5.5 4.5 5.5 4.5 5.5

TA = +25C Conditions
VOUT = 0.1V or VCC 0.1V VOUT = 0.1V or VCC 0.1V IOUT = 50A VIN = VIL or VIH:

TA = 40C to +85C Guaranteed Limits Units


V V V 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 1.0 1.5 75 75 A mA mA mA A V

Typ.
1.5 1.5 1.5 1.5 4.49 5.49 2.0 2.0 0.8 0.8 4.4 5.4 3.86 4.86 0.001 0.001 0.1 0.1 0.36 0.36 0.1 0.6

4.5 5.5 VOL Maximum LOW Level Output Voltage 4.5 5.5

IOH = 24mA IOH = 24mA(4) IOUT = 50A VIN = VIL or VIH:

4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input Minimum Dynamic Output Current(5) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 5.5

IOL= 24mA IOL= 24mA(4) VI = VCC, GND VI = VCC 2.1V VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND

4.0

40.0

Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time.

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 4

74AC04, 74ACT04 Hex Inverter

AC Electrical Characteristics for AC


TA = +25C, CL = 50pF Symbol
tPLH tPHL

TA = 40C to +85C, CL = 50pF Min.


1.0 1.0 1.0 1.0

Parameter
Propagation Delay Propagation Delay

VCC (V)(6)
3.3 5.0 3.3 5.0

Min.
1.5 1.5 1.5 1.5

Typ.
4.5 4.0 4.5 3.5

Max.
9.0 7.0 8.5 6.5

Max.
10.0 7.5 9.5 7.0

Units
ns ns

Note: 6. Voltage range 3.3 is 3.3V 0.3V. Voltage range 5.0 is 5.0V 0.5V.

AC Electrical Characteristics for ACT


TA = +25C, CL = 50pF Symbol
tPLH tPHL

TA = 40C to +85C, CL = 50pF Min.


1.0 1.0

Parameter
Propagation Delay Propagation Delay

VCC (V)(7)
5.0 5.0

Min.
1.0 1.0

Typ.
6.0 5.5

Max.
8.5 8.0

Max.
9.0 8.5

Units
ns ns

Note: 7. Voltage range 5.0 is 5.0V 0.5V.

Capacitance
Symbol
CIN VCC

Parameter
Input Capacitance Power Dissipation Capacitance

Conditions
VCC = OPEN VCC = 5.0V

Typ.
4.5 30.0

Units
pF pF

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 5

74AC04, 74ACT04 Hex Inverter

Physical Dimensions
Dimensions are in millimeters unless otherwise noted.

Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 6

74AC04, 74ACT04 Hex Inverter

Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted.

Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 7

74AC04, 74ACT04 Hex Inverter

Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted.

Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 8

74AC04, 74ACT04 Hex Inverter

Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted.

Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 9

74AC04, 74ACT04 Hex Inverter

TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Build it Now CorePLUS CROSSVOLT CTL Current Transfer Logic EcoSPARK

Fairchild Fairchild Semiconductor FACT Quiet Series FACT FAST FastvCore FPS FRFET Global Power ResourceSM

Green FPS Green FPS e-Series GTO i-Lo IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MillerDrive Motion-SPM OPTOLOGIC OPTOPLANAR

PDP-SPM Power220

Power247 POWEREDGE Power-SPM PowerTrench Programmable Active Droop QFET QS QT Optoelectronics Quiet Series RapidConfigure SMART START SPM STEALTH SuperFET SuperSOT-3 SuperSOT-6

SuperSOT-8 SyncFET The Power Franchise TinyBoost TinyBuck TinyLogic TINYOPTO TinyPower TinyPWM TinyWire SerDes UHC UniFET VCX

DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only.
Rev. I31

2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

No Identification Needed

Full Production

Obsolete

Not In Production

2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0

www.fairchildsemi.com 10

You might also like