You are on page 1of 4

NATURAL

FILLER COATING TYPE F (ED) KOURASANIT

SAFETY DATA SHEET


(According to 453/2010/EU Regulation)

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product description : Recommended use : Company data: Type F(ED) KOURASANIT Filler Coating Filler Coating in dry form for walls and floors KOURASANIT Tratselas Athanasios & Co 14 km Thessaloniki-Exohi P.O. 57010 Thessaloniki Greece Tel. +30 2310358916 Fax. +30 2310358709 E-mail: info@kourasanit.gr www.kourasanit.gr +30 2310358916 E-mail: info@kourasanit.gr

Emergency Telephone number: Info:

SECTION 2. HAZARDS IDENTIFICATION The mixture has been classified in accordance with No. 1272/2008 (EU) on classification, labeling and packaging of substances and mixtures. Product classification:

Xi IRRITANT
Hazard and precautionary phrases:

R43 S2 S22 S28 S36/37/39 S45 Ingredients:

May cause sensitization by skin contact Keep out of the reach of children Do not breathe dust If on skin wash immediately with plenty of water Always wear suitable protective clothing, gloves and eye/face protection In case of accident or if feeling unwell, ask at once for medical advice (read instructions on the label of the product if possible) Portland cement

Special labeling: The product gives a powerful alkaline reaction with water. Thus, protect skin and eyes to avoid dermal and ocular corrosion.

E-mail: info@kourasanit.gr | www.kourasanit.gr Material Safety Data Sheet 1st Edition (January 2011) Product: Filler Coating Type F (ED)

Page 1 of 4

SECTION 3. COMPOSITION/ INFORMATION ON INGREDIENTS Filler coating in dry form, produced mainly from natural aggregates (80 85%w/w), Portland cement and other additives. Component Portland Cement CAS Number 65997-15-1 Classification Xi R36/37/38.R43 Rate % (w/v) 15-19 %

SECTION 4. FIRST AID MEASURES Eye contact : Inhalation : Rinse with plenty of water keeping eyes open. If symptoms persist, ask for prompt medical advice. If breathed in, keep the source of dust away from the exposed person. If symptoms persist, ask for immediate medical advice. If swallowed, rinse mouth with water. Do not induce vomiting. Seek medical advice. Immediately wash with soap and water and then rinse thoroughly. If irritation develops or persists get medical advice.

Ingestion : Skin contact :

SECTION 5. FIRE FIGHTING MEASURES Fire extinguishing agents: Use the appropriate fire extinguishing agents taking into consideration the existing surrounding conditions. Special exposure hazards arising from the product itself: none reported Special fire fighting recommendations: not available. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Prevent skin and eye contact. Keep dust emission levels to the minimum. Ensure appropriate equipment. If necessary, use protection equipment. Environmental Precautions: Eliminate the release and keep the material in dry form, if possible. Prevent uncontrolled seepage into the ground water, drains, sewers, waterways and soil, as it may increase the pH. Cleaning up: Keep material in dry form, if possible and remove it by mechanical means. SECTION 7. HANDLING AND STORAGE Handling precautions: Avoid contact with skin and eyes. Keep dust emission levels to the minimum. Ensure adequate equipment. If necessary, use protection equipment. Storage requirements: Store in closed and dry location under normal temperature conditions. The product should be used within 6 months from the date of the receipt. Specific end use: Consult the relative instruction manual for the product. SECTION 8. EXPOSURE CONTROLS/ PERSONAL PROTECTION Control parameters. None defined. Exposure Controls Personal precautions General protection and hygienic precautions: Keep away from food and drinks. Avoid contact with eyes and skin. Do not eat or drink while at work. In case of accident remove the contaminated clothing.
E-mail: info@kourasanit.gr | www.kourasanit.gr Material Safety Data Sheet 1st Edition (January 2011) Product: Filler Coating Type F (ED) Page 2 of 4

Wash hands thoroughly before eating or drinking before breaks and at the end of the workday. Respiratory protection: Not required under normal use (well ventilated areas). In case of extensive exposure to dust, use filter mask type P2 for single use. Hand protection: Use protective nitrile impregnated gloves bearing the CE labeling. Eye protection: Use face protection. Put on tightly a protective mask safety goggles. Emergency eyewash facilities should be nearby, at workplace Body protection: Use protective work wear. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state Color Odor Danger of explosion Application temperature pH (by adding water) Chloride content Solvent content Powder According to the specifications Not defined No explosion hazard arising from the product itself From +5 C up 25 C 12 0,01% Organic contents: 0% Solids: 100%`
o o

SECTION 10. STABILITY AND REACTIVITY DATA Thermal decomposition /conditions to be avoided: Not observed. If used according to the required specifications the product will not decompose. Dangerous reactions: No dangerous reactions observed Dangerous decomposition products: No dangerous decomposition products known. SECTION 11. TOXICOLOGICAL INFORMATION None toxicological effect on humans according to current data SECTION 12. ECOLOGICAL INFORMATION Persistence and degradability: The product biodegradation is a difficult process. Bioaccumulation: No data available Mobility in soil: No data available Other adverse effects: The product contains substances which alter the pH and possibly have a harmful effect on fish and bacteria. Thus, should not be allowed to reach aquatic environment unneutralized. SECTION 13. DISPOSAL CONSIDERATIONS Product: The end product may be disposed as aggregate-construction waste. Wash thoroughly with water the used tools after finishing the application. Product package Rinse well with water the empty cans and then recycle them. SECTION 14. TRANSPORT INFORMATION The product is not classified as dangerous for shipment by any transportation means, under current provisions of the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) and under the International Rules for Transport of Dangerous Substances by Railway (RID) of the International Maritime Dangerous Goods Code IMDG and of the International Transport Air Association (IATA) regulations.

E-mail: info@kourasanit.gr | www.kourasanit.gr Material Safety Data Sheet 1st Edition (January 2011) Product: Filler Coating Type F (ED)

Page 3 of 4

SECTION 15. REGULATORY INFORMATION The specifications of the product fulfill the requirements of EU directives and harmonized standards: 89/106/EEC Directive on Product Engineering EU as amended by 93/68/EEC and the Hellenic Organization of Standardization EN 998-1 (CE) Safety, health and environmental regulations/legislation: REGULATION (EC) No 1272/2008 on the classification, labeling and packaging of substances and mixtures

SECTION 16. Other information Related R-phrases: R36 R37 R38 R43 Irritating to eyes Irritating to respiratory system Irritating to skin May cause sensitization by skin contact

This safety data sheet has been conducted in accordance with Regulation EC 453/2010

DISCLAIMER OF LIABILITY The safety information herein is based on data considered accurate and reliable to the best of Kourasanit knowledge and experience gained through the on-site application of the product (in vivo) as well as through laboratory research (in vitro). It is to be noted that there are no express or implied warranties from the part of the company for the suggestions and the recommendations related to the use of the product, since they do not keep control of the conditions in each case. Therefore, the buyers, users, appliers are absolutely responsible for the use, application and suitability of the product based on the project specifications and conditions. The company reserves the right to differentiate without any notice the technical features of its products due to the development of the production and the research.

The present safety data sheet does not refer to detailed specifications. Thus you are kindly requested to see the relevant technical data sheet.

Issue Date: January 2011 The present document cancels any other related prior issue and applies till a new one is delivered.

E-mail: info@kourasanit.gr | www.kourasanit.gr Material Safety Data Sheet 1st Edition (January 2011) Product: Filler Coating Type F (ED)

Page 4 of 4

You might also like