You are on page 1of 8

140K Motor Grader

The K Series Motor Grader is the machine you can count on when you need to get work done. Cat motor graders help you make the most of your investment by delivering maximum productivity and durability. The Cat C7 engine, direct-drive power shift transmission and load sensing hydraulics work together to ensure the power and precision you need to work in demanding conditions. And Cat motor graders are backed by the world-class Catdealer network to keep you up and running. Cat C7 Engine
Optimum power and fuel efficiency, combined with Power Management and Electronic Throttle Control, assure maximum productivity.

Balanced Hydraulics
Proportional hydraulic flow gives operators outstanding feel and predictable movements.

Machine Safety
Cat machines are designed with features to help protect the operator and others around the job site.

Serviceability
Grouped service points make daily maintenance easier and faster, while enhanced diagnostics and monitoring help reduce downtime.

Power Train
The Power Shift transmission features direct drive and electronic control for smooth, powerful shifts at any speed.

140K Motor Grader Specifications


Engine
Engine Model Base Power (1st gear) Net Base Power (1st gear) Net (Metric) VHP Range Net VHP gears 1-2 Net 3 Net 4-8 Net 1-2 Gross 3 Gross 4-8 Gross Displacement Bore Stroke Torque Rise Maximum TorqueNet Speed @ rated power Number of cylinders Derating altitude Fan Speed Maximum High Ambient Capability Cat C7 ACERT 128 kW 171 hp 174 hp 128-143kW 171-191hp 128 kW 135 kW 143 kW 140 kW 147 kW 155 kW 7.2 L 105 mm 127 mm 46% 996 Nm 2,000 rpm 6 3048 m 1,925 rpm 50 C 171 hp 181 hp 191 hp 188 hp 198 hp 208 hp 439 in3 4.1 in 5 in 735 lb ft

Operating Specifications
Top Speed forward reverse Turning Radius, outside front tires Steering Range left/right Articulation Angle left/right Forward 1st 2nd 3rd 4th 5th 6th 7th 8th Reverse 1st 2nd 3rd 4th 5th 6th 47.3 km/h 29.4 mph 37.4 km/h 23.2 mph 7.5 m 24 ft 9 in 47.5 Degrees 20 Degrees 4.1 km/h 5.5 km/h 8.0 km/h 11.0 km/h 17.4 km/h 23.6 km/h 32.5 km/h 47.3 km/h 3.2 km/h 6.0 km/h 8.7 km/h 13.7 km/h 25.7 km/h 37.4 km/h 2.5 mph 3.4 mph 5.0 mph 6.9 mph 10.8 mph 14.7 mph 20.2 mph 29.4 mph 2.0 mph 3.7 mph 5.4 mph 8.5 mph 16.0 mph 23.2 mph

10,000 ft 122 F

Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000rpm, measured at the flywheel when engine is equipped withfan, air cleaner, muffler and alternator. Maximum torque measured at 1,000 rpm in gears 4-8.

Maximum travel speeds calculated at high idle on standard machine configuration with 17.50-25 12PR (G-2) tires.

Hydraulic System
Circuit Type Load Sensing, Closed Center, Proportional Priority Pressure Compensating System Variable Piston 159.1 L/min 42 gal/min 210.5 L/min 55.6 gal/min 25 500 kPa 3,698.5 psi 3600 kPa 522.1 psi 55 L 14.5 gal

Power Train
Forward/Reverse Gears Transmission Brakes Service Service, surface area Parking Secondary 8 forward/6 reverse Direct drive, Power shift Air actuated, multiple oil-disc 23 948 cm2 3,712 in2 Air actuated, multiple oil-disc Dual circuit

Pump Type Pump Output Standard Pump Optional High Output Pump Maximum System Pressure Standby Pressure Reservoir Tank Capacity Pump output measured @ 2,150 rpm.

Brakes meet the following standards: SAE J/ISO 3450 JAN 98.

140K Motor Grader Specifications


Moldboard
Blade Width Moldboard height thickness Arc Radius Throat Clearance Cutting Edge width thickness End Bit width thickness Blade Pull base GVW maximum GVW Down Pressure base GVW maximum GVW 3.7 m 610 mm 22 mm 413 mm 120 mm 152 mm 16 mm 152 mm 16 mm 9108 kg 13 379 kg 7278 kg 13 963 kg 12 ft 24 in 0.9 in 16.3 in 4.7 in 6 in 0.6 in 6 in 0.6 in 20,080 lb 29,496 lb 16,044 lb 30,784 lb

Ripper
Ripping depth maximum Ripper shank holders, quantity Ripper shank holder spacing Penetration force Pryout force Machine length increase, beam raised Scarifier shank holder quantity 462 mm 5 533 mm 8694 kg 11 673 kg 970 mm 9 18.2 in 21 in 19,166 lb 25,735 lb 38.2 in

Scarifier
Mid, V-Type Working width Scarifying depth, maximum Scarifier shank holders quantity Scarifier shank holder spacing Rear Working width Scarifying depth, maximum Scarifier shank holders quantity Scarifier shank holder spacing 1184 mm 229 mm 11 116 mm 2300 mm 266 mm 9 267 mm 46.6 in 9 in 4.6 in 90.6 in 10.5 in 10.5 in

Blade Pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Vehicle Weight (GVW).

Blade Range
Circle Centershift right 728 mm left 752 mm Moldboard Sideshift right 663 mm left 512 mm Maximum Blade Position Angle 90 Degrees Blade Tip Range forward 40 Degrees backward 5 Degrees Maximum shoulder reach outside of tires right 1978 mm left 1896 mm Maximum lift aboveground 480 mm Maximum depth ofcut 735 mm 28.7 in 29.6 in 26.1 in 20.2 in

The mid-mount scarifier is positioned under the drawbar between the moldboard and front axle.

Frame
Circle diameter blade beam thickness Drawbar height width Front axle height to center wheel lean, left/right total oscillation Front-top/bottom plate width thickness Front-side plates width thickness Front-linear weights minimum maximum Front-section modulus minimum maximum 1530 mm 35 mm 127 mm 76.2 mm 628 mm 18 Degrees 32 Degrees 305 mm 25 mm 242 mm 12 mm 165 kg/m 213 kg/m 2083 cm3 4785 cm3 60.2 in 1.4 in 5 in 3 in 24.7 in

77.9 in 74.6 in 18.9 in 28.9 in

12 in 1 in 9.5 in 0.5 in 112 lb/ft 144 lb/ft 127 in3 291 in3

140K Motor Grader Specifications


Tandems
Height Width Sidewall thickness inner outer Drive chain pitch Wheel axle spacing Tandem oscillation front up front down 506 mm 201 mm 16 mm 18 mm 51 mm 1522 mm 15 Degrees 25 Degrees 19.9 in 7.9 in 0.6 in 0.7 in 2 in 59.9 in

Weights
Gross Vehicle Weight Base total 14 292 kg front axle 4172 kg rear axle 10 120 kg Gross Vehicle Weight Typically Equipped total 17 510 kg front axle 5053 kg rear axle 12 457 kg Gross Vehicle Weight Maximum total 22 870 kg front axle 8005 kg rear axle 14 866 kg 31,508 lb 9,197 lb 22,311 lb 38,603 lb 11,140 lb 27,463 lb 50,420 lb 17,647 lb 32,773 lb

Service Refill
Fuel Capacity Cooling system Engine Oil Transmission/Differential/FinalDrives Tandem housing (each) Front wheel spindle bearing housing Circle drive housing 305 L 40 L 18 L 60 L 64 L 0.5 L 7L 80.6 gal 10.6 gal 4.8 gal 15.9 gal 16.9 gal 0.1 gal 1.9 gal

Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, full fuel tank, coolant, lubricants andoperator. Typical operating weight calculated on standard machine configuration with Cab High Profile ROPS, rear ripper, push block, 14.00-24 12PR (G-2) tires, full fuel tank, coolant, lubricants and operator. Maximum Vehicle Weight includes all compatible attachments with Cab High Profile ROPS, 17.50-25 12PR (G-2) tires, full fuel tank, coolant, lubricants and operator.

Standards
ROPS/FOPS Steering Brakes Sound ISO 3471:1994/ ISO 3449:2005 ISO 5010:2007 ISO 3450:1996 ISO 6394:2008 ISO 6396:2008

These standards are met when the machine is equipped with a cab. The static operator sound pressure level is 77dB(A) when ISO6394:2008 is used tomeasure the value for an enclosed cab. Themeasurement was conducted with the cab doors and the cab windows closed. Thecab was properly installed and maintained.

140K Motor Grader Specifications


Dimensions
All dimensions are approximate.

10

8 11 12 13 7 6 3 5 4

1 Height ROPS Cab Height Non-ROPS Cab Height ROPS Canopy 2 Ground Clearance Center Front Axle 3 Length Between Tandem Axles 4 Length Front Axle to Moldboard 5 Length Front Axle to Mid Tandem 6 Length Front Tire to Rear of Machine 7 Length Counterweight to Ripper 8 Ground Clearance, Trans. Case 9 Height Top of Cylinders 10 Height to Exhaust Stack 11 Width Tire Center Lines 12 Width Outside Rear Tires 13 Width Outside Front Tires

mm 3354 3348 3354 626 1523 2598 6086 8504 10 013 362 3049 2895 2065 2452 2481

in 132.0 131.8 132.0 24.6 60.0 102.3 239.6 334.8 394.2 14.3 120.0 114.0 81.3 96.6 97.7

140K Motor Grader Standard Equipment


Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
ELECTRICAL Alternator, 115 Ampere Backup alarm, reversing lights Batteries, maintenance free 750 CCA Electrical system, 24 volt Horn, electric Lights, stop and tail Motor, starting Product Link Ready Working lights OPERATOR ENVIRONMENT Accelerator Control console, adjustable Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level) Guard rails, operator station Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation) Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift) Key start/stop switch Meter, hour Power steering, hydraulic Seat, vinyl-covered static Seat belt Steering wheel, tilt, adjustable Storage area, cooler/lunch box Throttle, electronic control POWER TRAIN Air cleaner, dry type radial seal with service indicator and automatic dust ejector Air to air after cooler (ATAAC) Blower fan Brakes, oil disc, four-wheel air actuated Differential with lock/unlock Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control. Meets non-current U.S. EPA Tier 2 and EU Stage II emission standards. Fuel water separator Muffler, under hood Parking brake, multi-disc, sealed and oil cooled Prescreener Priming pump, fuel, resiliently mounted Sediment drain, fuel tank Tandem drive Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection VHP (Variable Horse Power) OTHER STANDARD EQUIPMENT Bumper, rear CD ROM Parts Book Circle drive slip clutch Cutting edges, 152 mm 16 mm (6 in 5/8 in) curved DH-2 steel Doors, Engine compartment Drawbar, 6 shoe replaceable nylon composite wear strips Endbits, 16 mm (5/8 in) DH-2 steel Frame, articulated with safety lock Fuel tank, 305 L (80.6 gal) Ground level engine shutdown Link bar, 7 position Moldboard, 3658 mm 610 mm 22 mm (12 ft 24 in 7/8 in) blade with hydraulic sideshift and mechanical tip SOS ports, engine, hydraulic, transmission and cooling Toolbox with padlock Vandalism protection including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes. ANTIFREEZE Extended Life Coolant to 35 C (30 F)

140K Motor Grader Optional Equipment


Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
kg GUARDS Guard, transmission OPERATOR ENVIRONMENT Air conditioner with heater Heater, cab CAB/CANOPY Cab, ROPS* Cab, Non-ROPS* Canopy, ROPS* Seat, vinyl adjustable Seat, cloth, contour Fan, defroster, frontwindow Fan, defroster, rearwindow Sun shade, rear Wiper/washer, rear Wipers, intermittent front Mirrors, dual inside Mirrors, outside mounted Power port, 12V accessory Radio ready entertainment Tachometer/ Speedometer 98 lb 216 kg RIPPER/SCARIFIER Ripper/Scarifier, 961 rear mounted* Scarifier, mid mounted, 845 V-type LIGHTS Bar mounted, low, 13 directional and headlights Cab and bar mounted, 22 high, directional, headlights and worklights POWER TRAIN Autoshift OTHER ATTACHMENTS Product Link Snow Wing Mounting, frame-ready AccuGrade ARO Dryer, air Push plate, counterweight* Accumulator, blade lift Battery, extreme duty (1400 CCA) Ether, starting aid Heater, engine coolant, 220V lb 2,119 1,862 kg HYDRAULICS Pump, hydraulic, 2 high capacity (210 L/min 55.7 gal/min) Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing. BLADES, MOLDBOARDS Moldboard Blade, 4267 mm 610 mm 22 mm (14' 24" 7/8") Blade, front Cutting edge, 203 mm 19 mm (8" 3/4"). For use with 14' blade Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges lb 4

91 14

201 31 29

0 182 118 14 11 2 2 3 7 1 1 8 2 5 1

0 401 260 31 24 4 4 7 15 2 2 18 4 11 2

49

93

205

1180 50

2,601 110

5 91 10 13 907 77 14 1 1

10 201 22 29 2,000 170 31 2 2

11

24

* Weights represent changes to TypicallyEquipped machine weights.

140K Motor Grader

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com 2013 Caterpillar Inc. All Rights Reserved. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Product ID: 140K

AEHQ6975 April 2013

You might also like