Professional Documents
Culture Documents
D D D D D
150-mA Load Current Without External Power Transistor Adjustable Current-Limiting Capability Input Voltages up to 40 V Output Adjustable From 2 V to 37 V Direct Replacement for Fairchild A723C
description
The A723 is a precision integrated-circuit voltage regulator, featuring high ripple rejection, excellent input and load regulation, excellent temperature stability, and low standby current. The circuit consists of a temperature-compensated reference-voltage amplifier, an error amplifier, a 150-mA output transistor, and an adjustable-output current limiter. The A723 is designed for use in positive or negative power supplies as a series, shunt, switching, or floating regulator. For output currents exceeding 150 mA, additional pass elements can be connected as shown in Figures 4 and 5. The A723C is characterized for operation from 0C to 70C.
AVAILABLE OPTIONS PACKAGED DEVICES TA 0C to 70C PLASTIC DIP (N) A723CN SMALL OUTLINE (D) A723CD CHIP FORM (Y) A723Y
1 2 3 4 5 6 7
14 13 12 11 10 9 8
The D package is available taped and reeled. Add the suffix R to the device type (e.g., A723CDR). Chip forms are tested at 25C.
Current Source
VCC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Regulated Output
VZ
schematic
CC+ to V CC
. 8VC
JA, A. a T n h d e T m
CC+ CC
ge from V
R Z C CO CC+V C
U e
Ts
Pi
2 U s
T t
aA
JAZ
Input regulation
Ripple rejection Output regulation Reference voltage, Vref Standby current Temperature coefficient of output voltage Short-circuit output current Output noise voltage
NOTES: 3. For all values in this table, the device is connected as shown in Figure 1 with the divider resistance as seen by the error amplifier 10 k. Unless otherwise specified, VI = VCC+ = VC = 12 V, VCC = 0, VO = 5 V, IO = 1 mA, RSC = 0, and Cref = 0. 4. Pulse-testing techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.
NOTES: 3. For all values in this table, the device is connected as shown in Figure 1 with the divider resistance as seen by the error amplifier 10 k. Unless otherwise specified, VI = VCC+ = VC = 12 V, VCC = 0, VO = 5 V, IO = 1 mA, RSC = 0, and Cref = 0. 4. Pulse-testing techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.
APPLICATION INFORMATION
Table 1. Resistor Values (k) for Standard Output Voltages
OUTPUT VOLTAGE (V) 3.0 3.6 5.0 6.0 9.0 12 15 28 45 75 100 250 6 (see Note 7) 9 12 15 28 45 100 250 APPLICABLE FIGURES (SEE NOTE 5) 1, 5, 6, 9, 11, 12 (4) 1, 5, 6, 9, 11, 12 (4) 1, 5, 6, 9, 11, 12 (4) 1, 5, 6, 9, 11, 12 (4) 2, 4, (5, 6, 9, 12) 2, 4, (5, 6, 9, 12) 2, 4, (5, 6, 9, 12) 2, 4, (5, 6, 9, 12) 7 7 7 7 3, 10 3, 10 3, 10 3, 10 3, 10 8 8 8 FIXED OUTPUT 5% R1 (k) 4.12 3.57 2.15 1.15 1.87 4.87 7.87 21.0 3.57 3.57 3.57 3.57 3.57 3.48 3.57 3.57 3.57 3.57 3.57 3.57 R2 (k) 3.01 3.65 4.99 6.04 7.15 7.15 7.15 7.15 48.7 78.7 105 255 2.43 5.36 8.45 11.5 24.3 41.2 95.3 249 OUTPUT ADJUSTABLE 10% (SEE NOTE 6) R1 (k) 1.8 1.5 0.75 0.5 0.75 2.0 3.3 5.6 2.2 2.2 2.2 2.2 1.2 1.2 1.2 1.2 1.2 2.2 2.2 2.2 P1 (k ) 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 10 10 10 10 0.5 0.5 0.5 0.5 0.5 10 10 10 P2 (k ) 1.2 1.5 2.2 2.7 2.7 3.0 3.0 2.0 39 68 91 240 0.75 2.0 3.3 4.3 10 33 91 240
NOTES: 5. The R1/R2 divider can be across either VO or V(ref). If the divider is across V(ref), use the figure numbers without parentheses. If the divider is across VO, use the figure numbers in parentheses. 6. To make the voltage adjustable, the R1/R2 divider shown in the figures must be replaced by the divider shown below. R1 P1 R2 Adjustable Output Circuit 7. For Figures 3, 8, and 10, the device requires a minimum of 9 V between VCC+ and VCC when VO is equal to or more positive than 9 V.
APPLICATION INFORMATION
Table 2. Formulas for Intermediate Output Voltages
OUTPUTS FROM 2 V TO 7 V SEE FIGURES 1, 5, 6, 9, 11, 12 (4) AND NOTE 5 VO OUTPUTS FROM 4 V TO 250 V SEE FIGURE 7 AND NOTE 5 CURRENT LIMITING V [ 0.65 R
SC
+V
R2
(ref)
R1
) R2
+ V2 R3 + R4
VO
(ref)
R2 R1 R1
I (limit)
VO
+V
R1
(ref)
R2
) R2
+ V2 R3 + R4
VO
(ref)
R1
R1
) R2
I (knee) I OS
[V
OR3
V [ 0.65 R
SC
) R4
NOTES: 5. The R1/R2 divider can be across either VO or V(ref). If the divider is across V(ref), use figure numbers without parentheses. If the divider is across VO, use the figure numbers in parentheses. 7. For Figures 3, 8, and 10, the device requires a minimum of 9 V between VCC+ and VCC when VO is equal to or more positive than 9 V. VI
VC
RSC
Regulated Output, VO
NOTES: A. R3
for a minimum
aV
B. R3 can be eliminated for minimum component count. Use direct connection (i.e., R3 = 0).
APPLICATION INFORMATION
VI
VCC+
VC
OUTPUT A723 REF VZ CURR LIM CURR SENS IN+ IN FREQ COMP VCC 100 pF
RSC
Regulated Output, VO R1 R2
NOTES: A. R3
B. R3 can be eliminated for minimum component count. Use direct connection (i.e., R3 = 0).
R2 + R1 R1 ) R2
for a minimum
aV
VI
R2
2 k VC OUTPUT A723 VZ REF CURR LIM VCC+ CURR SENS IN IN+ VCC FREQ COMP Regulated Output, VO
2N5001
R4 = 3 k
R3 = 3 k
R1
100 pF
APPLICATION INFORMATION
VI
VCC+ REF
VC 2N3997
IN+
OUTPUT A723 VZ CURR LIM CURR SENS IN FREQ COMP 1000 pF RSC Regulated Output, VO
APPLICATION INFORMATION
VI
VCC+
VC
RSC R3
R1
OUTPUT A723 REF VZ CURR LIM CURR SENS IN+ IN VCC FREQ COMP 1000 pF
Regulated Output, VO
R4
IOS VO lknee IO
R2
2 k VCC+ 1N1826 VC
VI
2N2580
R4 = 3 k R3 = 3 k
OUTPUT A723 REF VZ CURR LIM R1 CURR SENS IN+ IN R2 VCC FREQ COMP 500 pF
RSC = 1
Regulated Output, VO
APPLICATION INFORMATION
10 k VCC+ 1N759 R3 = 3 k VC 10 k 2N5287 VI
R2
OUTPUT A723 REF VZ CURR LIM CURR SENS IN VCC FREQ COMP IN+
R1
R4 = 3 k
500 pF
Regulated Output, VO
VI
2N5153
1N4005
NOTE A: L is 40 turns of No. 20 enameled copper wire wound on Ferroxcube P36/22-3B7 potted core, or equivalent, with a 0.009-inch air gap.
APPLICATION INFORMATION
VI
VC 1 k
100
2N3997
Regulated Output, VO
11
4-Jun-2007
PACKAGING INFORMATION
Orderable Device UA723CD UA723CDE4 UA723CDG4 UA723CDR UA723CDRE4 UA723CDRG4 UA723CJ UA723CN UA723CNE4 UA723CNSR UA723CNSRE4 UA723CNSRG4
(1)
Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Package Type SOIC SOIC SOIC SOIC SOIC SOIC CDIP PDIP PDIP SO SO SO
Package Drawing D D D D D D J N N NS NS NS
Pins Package Eco Plan (2) Qty 14 14 14 14 14 14 14 14 14 14 14 14 25 25 50 50 50 Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
Lead/Ball Finish CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU
MSL Peak Temp (3) Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Call TI N / A for Pkg Type N / A for Pkg Type Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) TBD Pb-Free (RoHS) Pb-Free (RoHS)
2000 Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br) 2000 Green (RoHS & no Sb/Br)
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1
4-Jun-2007
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
Device
SPQ
Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 330.0 330.0 16.4 16.4 6.5 8.2
UA723CDR UA723CNSR
2500 2000
Pack Materials-Page 1
Package Drawing D NS
Pins 14 14
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as components) are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TIs terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TIs goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or enhanced plastic are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Audio Amplifiers Data Converters DLP Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID OMAP Applications Processors Wireless Connectivity www.ti.com/audio amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/omap TI E2E Community e2e.ti.com www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2012, Texas Instruments Incorporated Applications Automotive and Transportation Communications and Telecom Computers and Peripherals Consumer Electronics Energy and Lighting Industrial Medical Security Space, Avionics and Defense Video and Imaging www.ti.com/automotive www.ti.com/communications www.ti.com/computers www.ti.com/consumer-apps www.ti.com/energy www.ti.com/industrial www.ti.com/medical www.ti.com/security www.ti.com/space-avionics-defense www.ti.com/video