You are on page 1of 96

PREFERRED MAKERS LIST

Danish Export Association


Dansk Eksportforening
Tvrgade 15A
DK-8600 Silkeborg
+45 86 81 38 88
+45 86 81 31 14
export@dk-export.dk
www.dk-export.com
www.dk-danishmarine.com
Layout & Graphics
Danish Export Association
PrinfoHobro A/S
Printed by
PrinfoHobro A/S
DK-9500 Hobro
www.prinfohobro.dk
T
F
3
The reputation of Denmark as a leading
maritime nation has evolved from tradition
over many centuries
Danish Marine Group
As the centre of gravity in the shipbuilding industry has moved to East Asia,
Danish maritime companies has managed to move with it. By being foresighted and
innovative the Danish Marine Group has succeeded in maintaining a strong position
in the maritime world. This fact, combined with competitive prices and in all aspects
aiming for high standards, has placed the Danes on numerous Preferred Makers List
around the globe.
With more than a 120 companies, the Danish Marine Group is a strong and very active
section within the Danish Export Association, representing a variety of companies,
from some of the largest in the world within their respective business areas, to
some of the smallest specialised niche companies, covering almost every aspect and
requirement of the maritime world.
Jens Hammer Srensen
Chairman of the
Danish Marine Group
4
5
AABEnrAA MoTorfABriK . . . . . . . . . . . . . . . . . . . . 6
AALBorG inDuSTriES . . . . . . . . . . . . . . . . . . . . . 7
ALfA LAvAL coPEnHAGEn . . . . . . . . . . . . . . . . . . . 8
ALfA LAvAL TAnK EquiPMEnT . . . . . . . . . . . . . . . . . 9
AcTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
AMETEK cALiBrATion inSTruMEnTS . . . . . . . . . . . . . 11
AMPLiDAn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
APi MArinE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
APv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ATLAS incinErATorS . . . . . . . . . . . . . . . . . . . . . . 15
BLuE WATEr SHiPPinG . . . . . . . . . . . . . . . . . . . . . 16
BLcHEr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
c.c. JEnSEn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
c.c. JEnSEn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
cALLEnBErG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
cLoriuS conTroLS . . . . . . . . . . . . . . . . . . . . . . . 21
DAMcoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DAMPA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DAnELEc ELEcTronicS . . . . . . . . . . . . . . . . . . . . . 24
DAnfoSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
DAnfoSS SEMco firE ProTEcTion. . . . . . . . . . . . . . 26
DAniSH inTErior . . . . . . . . . . . . . . . . . . . . . . . . 27
DAnLAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
DAnSK WiLTon . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DAnTEc DYnAMicS . . . . . . . . . . . . . . . . . . . . . . . . 30
DEif . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DELTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DEn-JET MArinE. . . . . . . . . . . . . . . . . . . . . . . . . . 33
DESMi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
E. vEJvAD HAnSEn . . . . . . . . . . . . . . . . . . . . . . . . 35
ELLEHAMMEr . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
EMco conTroLS . . . . . . . . . . . . . . . . . . . . . . . . . 37
forcE TEcHnoLoGY. . . . . . . . . . . . . . . . . . . . . . . . 38
fuELSAMPLEr.coM . . . . . . . . . . . . . . . . . . . . . . . . 39
GErTSEn & oLufSEn . . . . . . . . . . . . . . . . . . . . . . . 40
GrEnAA MoTorfABriK . . . . . . . . . . . . . . . . . . . . . 41
GrunDfoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
HAMWorTHY SvAnEHJ . . . . . . . . . . . . . . . . . . . . 43
HEnninG frKJr . . . . . . . . . . . . . . . . . . . . . . . 44
HYDrA TEcH . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
iBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
inExA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
inSTruMATic . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
content
ironPuMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
iSic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
KnuD E. HAnSEn . . . . . . . . . . . . . . . . . . . . . . . . . 51
LinDAB vEnTiLATion . . . . . . . . . . . . . . . . . . . . . . 52
LoGSTor MArinE . . . . . . . . . . . . . . . . . . . . . . . . . 53
LYnGS MArinE . . . . . . . . . . . . . . . . . . . . . . . . . 54
LGSTruP-STEEL . . . . . . . . . . . . . . . . . . . . . . . . . 55
MAn DiESEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
MArinE ALiGnMEnT . . . . . . . . . . . . . . . . . . . . . . . 58
MArinE TEcHnic . . . . . . . . . . . . . . . . . . . . . . . . . 59
MAriTEAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
MEKAnorD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
METALocK DEnMArK . . . . . . . . . . . . . . . . . . . . . . . 62
norDHAvn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
novEnco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
orSKov YArD . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
oSK-SHiPTEcH . . . . . . . . . . . . . . . . . . . . . . . . . . 66
oxYMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
PrES-vAc EnGinEErinG . . . . . . . . . . . . . . . . . . . . . 68
rocKWooL MArinE & offSHorE . . . . . . . . . . . . . . . 69
ro-cLEAn DESMi . . . . . . . . . . . . . . . . . . . . . . . . . 70
SAinT-GoBAin MArinE APPLicATionS . . . . . . . . . . . . 71
ScAnDinAviAn BoiLEr SErvicE . . . . . . . . . . . . . . . 72
ScAnEL inTErnATionAL . . . . . . . . . . . . . . . . . . . . 73
ScAn-STEErinG . . . . . . . . . . . . . . . . . . . . . . . . . . 74
SELco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SEnMATic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
SHiPSErv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
SiKA DAnMArK . . . . . . . . . . . . . . . . . . . . . . . . . . 78
STEncA TrADinG . . . . . . . . . . . . . . . . . . . . . . . . . 79
SunTExT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SvEnDBorG BrAKES . . . . . . . . . . . . . . . . . . . . . . . 81
SfArT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
TDc, LYnGBY rADio . . . . . . . . . . . . . . . . . . . . . . . 83
TEMPrESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
THErKiLDSEn MArinE . . . . . . . . . . . . . . . . . . . . . . 85
uni-SAfE ELEcTronicS . . . . . . . . . . . . . . . . . . . . . 86
vESTErGAArD MArinE SErvicE . . . . . . . . . . . . . . . . 87
viKinG LifE-SAvinG EquiPMEnT . . . . . . . . . . . . . . . 88
WrTSiL DAnMArK . . . . . . . . . . . . . . . . . . . . . . 89
YorK MArinE . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
r THE MAriTiME iSLAnD AEroE . . . . . . . . . . . 91
DEGAArD & DAnnESKioLD-SAMSE . . . . . . . . . . . . 92
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
6 | AABEnrAA MoTorfABriK
See this catalogue as a pdf-le
at www.dk-danishmarine.com/catalogue
AABENRAA MOTORFABRIK
T
F
P R O D U C T S
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Naestmark 30, PO Box 79
6200 Aabenraa, Denmark
+45 74 62 20 88
+45 74 62 74 07
E-mail: bukh@bukh.dk
www.bukh.dk
Contacts:
Henning Joergensen
Sales Manager
Mail: bukh-steyr@post.tele.dk
Direct tel. +45 59 52 65 20
mobile: +45 21 78 70 12
Engine Sales
Sven Jacobsen
Technical & Quality Manager
Mail: sven.jacobsen@aabenraa
motorfabrik.dk
Direct tel. +45 73 33 10 45
mobile: +45 40 55 23 08
Technical issues, quality assurance,
engine sales
Lifeboat Diesel Engines
-SOLAS approved
Water-Jets
High-performance engines
for Fast Rescue Boats
T
H
E

O
R
IG
IN
A
L
BUKH Marine engines
- When safety
is the keyword!
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Nstmark 30, PO Box 79, 6200 Aabenraa,
Tel: +45 74 62 20 88 Fax: +45 74 62 74 07
E-mail: bukh@bukh.dk www.bukh.dk
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
naestmark 30, Po Box 79
DK-6200 Aabenraa
T +45 74 62 20 88
F +45 74 62 74 07

bukh@bukh.dk
www.bukh.dk
See this catalogue as a pdf-le
at www.dk-danishmarine.com/catalogue
AABENRAA MOTORFABRIK
T
F
P R O D U C T S
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Naestmark 30, PO Box 79
6200 Aabenraa, Denmark
+45 74 62 20 88
+45 74 62 74 07
E-mail: bukh@bukh.dk
www.bukh.dk
Contacts:
Henning Joergensen
Sales Manager
Mail: bukh-steyr@post.tele.dk
Direct tel. +45 59 52 65 20
mobile: +45 21 78 70 12
Engine Sales
Sven Jacobsen
Technical & Quality Manager
Mail: sven.jacobsen@aabenraa
motorfabrik.dk
Direct tel. +45 73 33 10 45
mobile: +45 40 55 23 08
Technical issues, quality assurance,
engine sales
Lifeboat Diesel Engines
-SOLAS approved
Water-Jets
High-performance engines
for Fast Rescue Boats
T
H
E

O
R
IG
IN
A
L
BUKH Marine engines
- When safety
is the keyword!
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Nstmark 30, PO Box 79, 6200 Aabenraa,
Tel: +45 74 62 20 88 Fax: +45 74 62 74 07
E-mail: bukh@bukh.dk www.bukh.dk
See this catalogue as a pdf-le
at www.dk-danishmarine.com/catalogue
AABENRAA MOTORFABRIK
T
F
P R O D U C T S
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Naestmark 30, PO Box 79
6200 Aabenraa, Denmark
+45 74 62 20 88
+45 74 62 74 07
E-mail: bukh@bukh.dk
www.bukh.dk
Contacts:
Henning Joergensen
Sales Manager
Mail: bukh-steyr@post.tele.dk
Direct tel. +45 59 52 65 20
mobile: +45 21 78 70 12
Engine Sales
Sven Jacobsen
Technical & Quality Manager
Mail: sven.jacobsen@aabenraa
motorfabrik.dk
Direct tel. +45 73 33 10 45
mobile: +45 40 55 23 08
Technical issues, quality assurance,
engine sales
Lifeboat Diesel Engines
-SOLAS approved
Water-Jets
High-performance engines
for Fast Rescue Boats
T
H
E

O
R
IG
IN
A
L
BUKH Marine engines
- When safety
is the keyword!
AABENRAA MOTORFABRIK
Heinrich Callesen A/S
Nstmark 30, PO Box 79, 6200 Aabenraa,
Tel: +45 74 62 20 88 Fax: +45 74 62 74 07
E-mail: bukh@bukh.dk www.bukh.dk
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
AALBorG inDuSTriES A/S | 7
AAlBORg INduSTRIES A/S
Gasvaerksvej 24
P.o. Box 844
DK-9100 Aalborg
T +45 99 30 40 00
F +45 98 16 83 16

aal@aalborg-industries.com
www.aalborg-industries.com


conTAcTS:
Marine boilers:
marine-boilers@aalborg-industries.com

Heat exchangers:
heaters@aalborg-industries.com

After Sales service/repair:
repair-marine@aalborg-industries.com

After Sales spare parts:
spares-marine@aalborg-industries.com

Service/equipment for fPS:
fps@aalborg-industries.com
Steam, heat & safety
solutions
On the basis of world lea-
ding technology, we provi-
de our customers with re-
liable, innovative and
optimal steam, heat and
safety solutions that are
environmentally friendly
and ensure the lowest pos-
sible life cycle costs.
Continuous research and
development and experien-
ce from 40,000 boiler plants
delivered since 1919 form
the basis of the most com-
plete range of marine boi-
lers in the market today.
Our boilers are supplied as
complete units with burner
and control system. This
makes them easy to install
and safe to operate. Our
boiler plants and inert gas
systems can be delivered on
skids for practical installa-
tion on board FPS units.
Aalborg Industries' product
range covers steam and
hot-water boilers, waste
heat recovery units after
diesel engines and gas tur-
bines, thermal fluid heating
systems, oil/gas-fired bur-
ners, control/safety systems,
heat exchangers and inert
gas systems.
The Aalborg Industries
Group provides world-wide
After Sales service that
includes commissioning of
equipment, training of
operators, supply of spare
parts and prebent tubes, as
well as maintenance, ser-
vice and repairs during
voyage.
Your Preferred Partner
140x240mm_APR_2007.qxd 16/04/2007 09:21 Page 1
P R O d u C T S
Machinery outside
engine spaces
Main and auxiliary
machinery components
boilers
heat exchangers
burners
inert gas systems
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
8 | ALfA LAvAL coPEnHAGEn A/S
AlFA lAvAl COPENHAgEN A/S
Maskinvej 5
DK-2860 Sborg

T +45 39 53 60 00
F +45 39 53 65 50
alfalaval@alfalaval.com
www.alfalaval.com
Leadership on
the seven seas
www.alfalaval.com
Message in a bottle:
More than half of the ships in the world are equipped
with Alfa Laval products and solutions. For the benefit
of the ship itself: cleaning, conditioning and handling
of fuel and lube oil. For the benefit of passengers and
crew: purification of sea water, and air-conditioning
systems to create the perfect climate on board. For
the benefit of the environment: effective tank cleaning,
advanced waste management, and economies in the
use of energy. But our involvement in the marine
industry goes further than that. We have a worldwide
network for marine service in all major ports and
provide the necessary assistance for ship owners
who want their fleet to be moving full steam ahead.
Ad_flaskskepp_140x190.qxd 06-05-11 13.43 Sida 1 www.fotoskrift.se
Alfa Laval
Te genuine Fresh water generator
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
ALfA LAvAL TAnK EquiPMEnT AB | 9
P R O d u C T S
Tank equipment
Tank cleaning machines
Gas freeing fans
G-Pass 3D shadow
calculation tools
Gunclean Toftejorg
Tank cleaning solutions
from Alfa Laval
As a part of your cargo operations, tank cleaning is important
for effective turnaround in port. Getting it right takes not only
quality machines, but also a well-designed installation.
Besides the machines and their positions, your tank design,
pumps, heaters, boiler and pipes each have an impact on
cleaning performance. For peak operation and economy, your
system should be designed with all of them in mind a process
Alfa Laval is well equipped to handle.
Alfa Lavals more than 50 years of Gunclean Toftejorg cleaning
experience result in xed or portable solutions with top exibility
and performance. Behind them all are three important factors
ensuring the highest level of tank cleaning optimization.
Optimized
in three
dimensions
T HE F I RST DI MENSI ON
Understanding
A true tank cleaning solution involves much more than a
piece of paper. While shadow diagrams can provide a good
start, they alone do not ensure a working installation. An in-
depth knowledge of the goals and potential problems is
essential for thorough cleaning.
T HE SECOND DI MENSI ON
Tools
Alfa Laval can prepare tank cleaning solutions with G-Pass,
a unique software tool that visualizes your tanks angles and
obstructions in 3D. By specifying an Alfa Laval installation
created with G-Pass, you ensure high-quality diagrams that
will be matched by real-world results.
T HE T HI RD DI MENSI ON
Technology
Alfa Laval leads the way in tank cleaning innovation. Our
latest tank cleaning machine, the Gunclean Toftejorg i65 S,
introduces new benets to our robust and reliable Gunclean
Toftejorg solutions. Most important is the hysterisis clutch,
a soft starter that eliminates the slippage and false starts
of magnetic clutches.
The single-
nozzle Gunclean
Toftejorg i65 S.
G-Pass creates a three-dimensional view of your tank that
can be rotated in any direction. All obstructions are present
and areas not hit by the cleaning jets are clearly shown.
In the hysterisis clutch, a hysterisis plate
and multiple magnets create an even
magnetic eld that needs no synchronization
eliminating slippage and false starts.
www.alfalaval.com
Ad_Tankcleaning_140x240.qxd 07-02-15 16.26 Sida 1 www.fotoskrift.se
AlFA lAvAl TANK EquIPMENT AB
P.o.Box 1149
Baldershj 19
DK-2635 ishj
T +45 43 55 86 00
F +45 43 55 86 01
tankequipment.info@alfalaval.com
www.alfalaval.com/marine
contacts:
Danny ingemann olsen
Danny.olsen@alfalaval.com
Portfolio Manager
christian Mathiasen
christian.mathiasen@alfalaval.com
Project Department
ronni Palmqvist
ronni.palmqvist@alfalaval.com
Project Engineer
Annette Damm
Annette.damm@alfalaval.com
Project coordinator
Jens Mondrup
Jens.mondrup@alfalaval.com
Project coordinator
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
10 | AcTA A/S
ACTA A/S
industrivej 9
DK-5260 odense S
T +45 63 17 61 00
F +45 66 15 35 57
www.acta.dk
contacts:
claus Bondo
Global Sales Manager
cbo@acta.dk
P R O d u C T S
Ship outft and equipment
cargo handling outft and
equipment
Cranes customized for each specifc
application and customers requirements
Engineering and producing cranes to the
highest quality standards
ACTA A/S is one of the worlds leading engineer-
ing and production companies for cranes and life-
saving equipment for use on large ships, ofshore
platforms and industrial applications.
While our head-ofce is located in Denmark, our
service reaches world-wide through an extensive
network of agents and service partners.
It is our aim to help our customers avoid of-hire
periods by providing a high quality product and
supporting it with a worldwide afer-sales service.
We are known by ship owners for a non-com-
promising attitude towards product quality and
service.
Customized cranes for all applications
We are specialized in providing customized solu-
tions for every application. In our co-operation
with ship owners, ship consultants and shipyards
we are focussed on providing a unique customer
service that anticipates our customers needs
and requirements all through the life-time of the
crane.
In every single project, we take care of all steps
in the process from needs analysis, design and
construction to manufacturing, delivery and com-
missioning.
Global manufacturing philosophy
ensures competitiveness
Our production philosophy is based on utilizing
the global manufacturing possibilities. We manu-
facture products both in Denmark, Central Eu-
rope and the Far East to ensure our fexibility and
our competitiveness at the same time.
ACTA can supply many types of cranes:
Hydraulic hose cranes
Hydraulic stores cranes
Electronic and hydraulic gantry cranes
Provision cranes
Hydraulic stores cranes - telescopic
Hydraulic stores cranes knuckable boom type
Lifesaving equipment
Liferaf davits
Combined type cranes
Avoid of-hire caused by malfunctioning cranes
choose ACTA as your partner!
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
Temperature calibrators
Pressure calibrators
Signal calibrators
Temperature sensors
AMETEK | 11
AMETEK Calibration Instruments
is one of the worlds leading manufac-
turers and developers of calibration in-
struments for temperature, pressure and
process signals both from a commercial
and a technological point of view.
We have R&D, production, sales and
service facilities in Denmark, and
operates through a world-wide network
of Sales & Service offces as well as
through distributors in more
than 50 different countries.
JOFRA Temperature Calibrators
Portable precision thermometers.
Dry-block and liquid bath calibrators:
4 series, with more than 25 models
- featuring speed, portability, accuracy
and advanced documenting functions
with JOFRACAL calibration software.
JOFRA Pressure Calibrators
Convenient electronic systems ranging
from -1 to 1000 bar (25 inHg to 14,500
psi) - multiple choices of pressure
ranges, pumps and accuracies, fully
temperature- compensated for
problem-free and accurate feld use.
JOFRA Signal Calibrators
Process signal measurement and
simulation for easy control loop
calibration and measurement tasks
- from handheld feld instruments for
multi or single signals to laboratory
reference level bench top instruments.
JOFRA / JF Marine Calibrators
A complete range of calibration
equipment for temperature, pressure
and signal, approved for marine use.
FP Temperature Sensors
A complete range of temperature
sensors for industrial and marine use.
AMETEK Calibration Instruments offers a
complete range of calibration equipment
AMETEK
CAlIBRATION INSTRuMENTS
Gydevang 32-34
DK-3450 Allerd
T +45 48 16 80 00
F +45 48 16 80 80
ametek@ametek.dk
www.ametekcalibration.com
www.jofra.com
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
12 | AMPLiDAn A/S
AMPlIdAN A/S
Lyngs Alle 2
DK-2970 Hrsholm
T +45 45 16 62 01
F +45 45 16 62 76

info@amplidan.com
www.amplidan.com

contact:
Hans Kristensen
sales@amplidan.com


C
o
m
m
u
n
a
l
A
e
r
ia
l
S
y
s
t
e
m
s


A
u
t
o
m
a
t
ic

T
e
le
p
h
o
n
e

S
y
s
t
e
m
s
Fog, Bell & Gong Systems
S
ou
n
d
S
u
rveillan
ce S
ystem
s


R
a
d
i
o

B
e
a
c
o
n
s

(
N
D
B
)
S
elf P
ow
ered
Telep
h
on
e S
ystem
s


P
u
b
l
i
c

A
d
d
r
e
s
s

S
y
s
t
e
m
s


T
a
l
k

B
a
c
k

S
y
s
t
e
m
s


A
l
a
r
m

C
a
l
l




S
y
s
t
e
m
s
Safe and Sound
Communication and Safety Solutions
for any type of ship...
P R O d u C T S
Internal Communication
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
API Marine is a house of competence, where development, design and pro-
duction processes are united in unique products for tank installations within
marine and industry. Entire liquid cargo control systems can be supplied from
sensors in the tank and operators stations to the calculation software.
The API Marine systems are approved according to IMO and the US Coast Guard.
Certified according to ISO 9001 and ATEX PQAN, API Marine fulfils all inter-
national requirements for tank installations carrying hazardous goods.
The API Marine tank measuring solutions can operate in any liquid, in extreme
temperatures and in any shape of tank. Using state-of-the-art technology and
modern methods, the API Marine solutions ensure fast and reliable liquid cargo
handling as well as safe storage during voyages.
API Marine products will be onboard the worlds first LPG tankers designed
with an IMO Green Passport, fulfilling the IMO environmental friendly require-
ments.
Sensors
For measurements of level, temperature and density of the cargo and inert gas
pressure of the cargo tank
Liquid Level Switches
Designed for precise measuring in harsh environments and heavy conditions for
all types of liquids
MasterLOAD
Designated software for onboard calculation of Safe Operation Parameters
Integrated Smart Cargo Control Systems for Tankers
Multifunctional Integrated Automation System
API Marine Innovators
in advanced tank technology
Range of products
API MARINE APS
Troensevej 12
DK-9220 Aalborg oest
T +45 96 34 50 70
F +45 96 34 01 70
info@api-marine.com
www.api-marine.com
contact:
Sven Egelund rasmussen
P R O d u C T S
Cargo handling outft
& equipment
Automation systems
Onboard calculation
software
Level switches
Level, temperature, pressure
& density sensors
APi MArinE APS | 13
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
14 | APv
Since its foundation in 1923, APV has de-
veloped from being a local supplier of heat
exchangers to being a worldwide and inter-
nationally recognized supplier of high quality
plate heat exchangers to marine applications
and has continuously extended its product
range to match customer requirements.
The APV global Marine Division is representing
a range of high quality plate heat exchangers
and fresh water generator for a multitude of
marine applications such as central and l.o.
coolers, jacket water preheaters & cooling,
cargo heating, and steam dump condensers.
The product portfolio comprises a wide range
of plate heat exchangers, including the Quasar
APV ParaFlow plate heat exchangers, which are
especially designed for water and oil cooling
on board vessels. The Quasar family of plate
APV Global Marine Division
heat exchangers are characterized by offer-
ing a multitude of plate designs and having
patented corner locks and easy-clip gaskets as
well as a highly advanced distribution area de-
sign and in-line flter securing high effciency.
For water de-salination APV offers units, which
can provide up to 60 t/day of fresh water us-
ing waste heat from the main engine, and
cooled by seawater. The packaged units are
available in single stage plate type, stainless
steel vessel, steam injection and UV and re-
hardening flters.
APVs global network of sales affliates and
partners, means that qualifed expertise and
support are always at hand. Manufacturing
sites are found in the USA, Brazil, Denmark,
Germany, Poland, China and South Korea.
APv
Platinvej 8
DK-6000 Kolding
T +45 70 27 84 44
F +45 76 32 41 56
marine.kolding@invensys.com
www.apv.com
P R O d u C T S
Ship outft and equipment
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
ATlAS INCINERATORS A/S
Masnedoevej 73
DK-4760 vordingborg
T +45 55 34 66 55
F +45 55 37 66 33
atlas@atlasinc.dk
www.atlasinc.dk
contacts:
Erik vilhelmsen
Tine Kaalund Jensen
Pierre naaman
Application:
ATLAS Incinerators for shipboard, Ofshore,
and Power Plant installations.
ATLAS Incinerators for Industrial Waste
ATLAS Containerized Incinerators for ship-
board, Ofshore and Power Plants.
Characteristics:
For simultaneous burning of oil sludge and
solid waste.
Multiple Chambered Incinerator with a three
chamber design meets the tough emission
limits issued by environmental authorities
and classifcation societies.
An efcient induced draught air ejector
creates vacuum in the combustion chambers
and evacuates the fue gas.
MED Certifcate meeting the requirements in
IMO RESOLUTION MEPC 76 (40) adapted
on 25 September 1997 - Tested acc. to Stand-
ard Specifcation for Shipboard Incinerators
- adapted on 26 September 1997, and in ac-
cordance with the Guidelines for the Imple-
mentation of Annex V of MARPOL 73/78, as
well as fulflling MARPOL Annex VI.
USCG Type Approved
Approval by all major classifcation societies
Containerized or skid mounted on request.
P R O d u C T S
Main and auxiliary
machinery components
ATLAS incinErATorS A/S | 15
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
16 | BLuE WATEr SHiPPinG A/S
BluE WATER SHIPPINg A/S
Trafkhavnskaj 11
P.o. Box 515
DK-6701 Esbjerg v.
T +45 79 13 41 44
F +45 79 13 46 77
bwsebj@bws.dk
www.bws.dk
P R O d u C T S
Worldwide shipping and
freight forwarding.
Blue Water provides all
transport and logistic related
services by sea, air, road and
rail - from small courier pack-
ages up to heavy projects.
International & all-round
transport, shipping &
freight forwarding com-
pany.
Established in Esbjerg,
Denmark in 1972.
44 offces in 24 countries.
700 employees.
Turnover EUR 270 million.
500 trucks in Western and
Eastern Europe

YOUR WORLDWIDE
TRANSPORT PARTNER
Blue Water Shipping
Global trade is in constant motion and
the need for safe and reliable transport is
bigger than ever.
Being one of the most all-round transport
companies in the world, we are proud
to offer all forms of transport solutions:
from the smallest day-to-day courier
parcel to project forwarding of giant drill-
ing rigs, transport by road all over Europe
- of industrial cargo as well as chilled
and frozen products, container traffc to
and from all continents - both full loads
and general cargo, sea and airfreight to
and from the North Atlantic - the Faroe
Islands, Iceland and Greenland - and
cruise logistics.
In short; any transport solution by sea,
road and air - truck, rail, plane, vessel.
With 44 offces in 24 countries all over the
world, we are always close to our clients
and suppliers and our staff consisting of
700 skilled employees are working proac-
tively to take care our the clients transport
needs. Effcient communication via online
booking systems or custom-designed IT
solutions ensure that the goods are being
tracked from door to door.
To cut a long story short;
Blue Water Shipping is
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
BLcHEr | 17
BlCHER
Pugdalvej 1
DK-7480 vildbjerg
T +45 99 92 08 00
F +45 99 92 08 30
www.blucher.com
marine@blucher.dk
contacts:
Allan falkesgaard
marine sales manager
Arndt Sndergaard
marine sales manager
Per rasmussen
exports sales manager
P R O d u C T S
Machinery piping
and fttings
BLCHER, manufacturer of stainless steel drainage
systems, installs its BLCHER

EuroPipe stainless
steel sanitary pipework system to wastewater
systems onboard all kinds of vessels.
The BLCHER

EuroPipe is interchangeable
between gravity and vacuum discharge systems,
and it is suitable for black and greywater
discharge, scupper lines, central vacuum cleaning
systems and garbage disposal systems among
others.
The benefts of BLCHER

EuroPipe include the


speed and ease of installation and its lightweight
properties. For the shipyard, the same product
range can be used for either blackwater system
or greywater system. From the owner side, the
beneft is the long lifetime of the system, its
reliability, no leaking, no corrosion and minimum
maintenance requirements.
BLCHER

EuroPipe is freproof and does not


release any toxic gases in case of fre. When
penetrating fre divisions in bulkheads and decks,
pipe penetrations have been fre tested and
MED approved according to IMO Res. A 754(18)
approval class A0 to A60.
The BLCHER

EuroPipe system can be installed


in all types of black and greywater discharge
systems, working perfectly with all recognised
vacuum toilet systems and in gravity systems.
BLCHER

EuroPipe is available in stainless steel


grade AISI 316L or optionally grade AISI 304, in
outside diameters 50, 75, 110, 125, 160 and 200
mm in standard lengths from 0.15 m to 6 m and
with a wide range of fttings.
BLCHER also produces drains for shower
cabins, bathrooms, galleys and other deck areas.
Among recent product news are drains and pipe
penetrations with fanges in combined stainless
steel and aluminium, enabling welding of the
stainless steel drains and pipe penetrations
directly into aluminium structures.
BLCHER stainless steel
sanitary discharge systems
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
18 | c.c. JEnSEn A/S
C.C. JENSEN A/S
Lvholmen 13
DK-5700 Svendborg
T +45 63 21 20 14
F +45 62 22 24 50
windows@cjc.dk
www.cjc.dk
contacts:
Bjarne B. christensen
bbc@cjc.dk
P R O d u C T S
Glass and frame constructions.
fire rated products.
Straight or curved
sliding doors.
repair and maintenance.
Accessories.
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
c.c. JEnSEn A/S | 19
C.C. JENSEN A/S
Lvholmen 13
DK-5700 Svendborg
T +45 63 21 20 14
F +45 62 22 46 15
cjc@cjc.dk
www.cjc.dk
contacts:
Lars Bo Andersen
P R O d u C T S
Main and auxiliary
machinery components
c.c.JEnSEn design and manufacture oil and fuel fl-
ters, separators and desorbers as well as oily water
separator for all kinds of marine applications
The cJc
TM
fine filters are 3 micron depth flters for
hydraulic and lubricating oils. The filter Separators
combine depth fltration with water separation and
are used for diesel fuels and for water contaminated
lubricating and hydraulic oils.
The oily water separator - called oilAbsorb ensures
that the oil content in bilgewater is less then 5 ppm.
Products: fine filters, filter Separators, Desorbers
oilAbsorb and Diesel Engine units.
What does a breakdown in your systems cost?
Breakdowns in oil and fuel systems are often related to
contamination - and can be avoided!
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
20 | cALLEnBErG A/S
CAllENBERg A/S
Svendborgvej 226
DK-5260 odense S
T +45 70 26 35 01
F +45 70 26 35 02
info@callenberg.dk
www.callenberg.dk
contacts:
Hans Henrik Hoffmann
Sales Manager, callenberg A/S
When you are looking for one partner
for all your electrical marine installation
and service needs
- Callenberg A/S is the right choice
Callenberg A/S is known worldwide as a specialist
in turnkey projects for electrical marine applica-
tions on all types of ships.
Tree business areas that cover all
maritime electrical installations
End-to-end turnkey projects for main, distri-
bution and emergency switchboards, control
consoles, motor control centres, motor start-
ers as well as test panels - brand named Semco
Switchboards.
Installation services by qualifed electrical engi-
neers and electro-technicians for complete in-
stallation or conversion of electrical systems.
Marine service and repair provided around the
world, including the availability of experienced
manpower and mobile equipment within 24 hours.
In-house stock of 4000+ items readily available.
Your guarantee of a high quality is our ISO9001:
2000 certifcate and our close co-operation with
classifcation societies around the world.
A tradition of customer service
Te Customer Relationship Management process
includes everything from technical specifcation
and contract negotiation to classifcation, com-
missioning and afer sales service. It ensures
a smooth process and is closely linked to our
ISO9001 certifcation.
Te company was founded in 1911. Today we are
owned by the Callenberg Group in Sweden, which
has ofces around the world.
Te combined forces in the Callenberg Group
make us even more interesting as partners for ship
owners, shipyard and ship consultants.
A wide range of Semco Switchboards
Main switchboards
Emergency switchboards
Distribution switchboards
Control consoles
Motor control centres
Motor starters
Test panels
P R O d u C T S
consultants
Ship outft and equipment
Electrical and automation
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
cLoriuS conTroLS A/S | 21
ClORIuS CONTROlS A/S
Tempovej 27
DK-2750 Ballerup
T +45 77 32 31 30
F +45 77 32 31 31
mail@cloriuscontrols.com
www.cloriuscontrols.com
contacts:
Torben Laursen
casper Kehlet
Sren christensen
P R O d u C T S
Ship outft and equipment
Eleclronic conlrollers
Eleclric volve molors
Sell-ocling lhermoslols
Conlrol volves
Now 3-woy volves up lo
0N 500
NW5
C|cr|us Ccntrc|s
ensures re||ob|e
ccntrc| |n sh|ps
Mcre thon 00 yeors cf exper|ence
Clorius Conlrols A/S is speciolized in lhe
developmenl ond produclion ol equipmenl
lor moniloring, conlrolling ond reguloling
heoling, cooling ond venlilolion. Pelying on
our experlise ol lhis oreo, we oller complele
series ol volves, sell-ocling lhermoslols,
elec lro nic conlrollers ond eleclric volve
molors. These con be used lor engine jockel
cooling woler syslems, lubricoling oil coolers,
hol woler lonk heoling, heoling syslems lor
lresh woler ge ne rolors ond heoling syslems
lor oir condilioning plonls, elc.
Our long-slonding service ond our relioble
producls wilh high quolily hove esloblished
our well-known brond.
Todoy, we de liver up-lo-dole equip menl
lo vorious induslries oll over lhe world,
porliculorly lo lhe morili me induslry.
Our prolessionol engineer leom con oller
24 hours service. Our vision is lo ensure lhe
mosl relioble ond economic conlrol syslems
lor our cuslomers.
C|cr|us Ccntrc|s A/5 |s ycur best chc|ce
ond ensures ycur sh|p runn|ng o|| yeors!
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
22 | DAMcoS A/S
dAMCOS A/S
Aaderupvej 41
DK-4700 naestved
T +45 55 78 72 00
F +45 55 78 72 72
damcos@damcos.com
www.damcos.com
P R O d u C T S
Ship outft and equipment
Machinery outside
engine spaces
Electrical and automation
New name business as usual
Marine Tank Management
Tank Measurement Valve Actuation
www.damcos.com
Damcos is a comprehensive global sup-
plier of management and control solu-
tions for marine applications. The
company name was recently changed
from Danfoss Marine Systems to
Damcos due to new ownership but apart
from that everything remains the same.
The companys core competencies are
marine tank management, valve actu-
ation and tank measurement, intended
for use on ships and in the oil and gas
industry. And every solution be it a de-
livery of single components or the de-
sign of a complete management system
is backed by expert know-how and a
strong passion for the marine business.
Please, visit www.damcos.com to learn
more about customized management
and control solutions at sea.
Former DanFoss mari ne systems
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
DAMPA APS | 23
P R O d u C T S
fire rated ceilings
Decorative c-class ceilings
DAMPA is internationally renowned as one of the world's most
innovative and well-proven ceiling supplier for all type of marine
and offshore applications.
The World Leading Marine Ceiling Systems
We offer a wide range of functional and fre classifed
light weight ceilings for all areas. The ceiling systems
are suitable for both accommodation and public
areas.
Our philosophy is to offer pre-planned constructions
to reduce labour costs, installation time and on-site
wastage. Alternative supply possibilities range from
individual product deliveries to fully pre-manufac-
tured, logistically integrated ceiling concepts.
DAMPA's engineering service includes assistance with
design implementation, ceiling layout CAD drawings
and a full material take-off and specifcation.
Idea & Vision
The DAMPA idea and vision is to design, develop and
manufacture, technically and functionally innovative
marine ceiling systems to provide a safe and pleasant
environment at sea and allow:
Designers to utilise the advantage of style and
fexibility
Shipyards to take advantage of the rational out-
ftting principles together with our fast and reliable
deliveries
Owners to cherish the functionality and durability
Long Standing Customer ReIations
DAMPA has always been committed to teamwork,
and we see ourselves more as a co-producer than
a traditional sub-supplier.
We are privileged to have enjoyed a long and
established relationship with the majority of our
customers, in some instances going back over
25 years.
Fast and ReIiabIe DeIivery
Fast and reliable delivery is the trademark of
DAMPA's modern and fexible production facilities.
We have many years of extensive experience
from truck deliveries all over Scandinavia and Europe,
as well as with international shipping to clients both in
Middle East, Asia Pacifc, Australia and USA.
QuaIity Assurance
DAMPA's Quality Management System is approved
and certifed according to SO 9001 by Lloyd's LRQA
Ltd - ensuring all DAMPA Marine Ceiling systems
are manufactured to the highest standards, within
close tolerances to guarantee an accurate, fast and
reliable installation.
WorId Wide Organisation
DAMPA is a 100% owned subsidiary of Chicago
Metallic Corporation, USA. The company is employing
over 1,000 people worldwide, with approx. 400 based
in Europe.
DAMPA is one of the companies constituting the
European Division and is specialised in ceiling systems
for the international building and ship-building
industries.
DAMPA_ad 2006 press.indd 1 06/02/06 15:49:37
dAMPA APS
Hjelkkevej 4a
DK-5690 Tommerup
T +45 63 76 13 20
F +45 63 76 13 99
dampa@dampa.dk
www.dampa.com
contacts:
Sales Manager Lars nyberg
for local reprensentatives please
refer to www.dampa.com
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
24 | DAnELEc ELEcTronicS A/S
dANElEC ElECTRONICS A/S
Blokken 44
DK-3460 Birkeroed
T +45 45 94 43 00
F +45 45 94 43 01
sales@danelec.dk
www.danelec.dk
P R O d u C T S
Ship outft and equipment
Machinery outside
engine spaces
Electrical and automation
Company Profle
Danelec Marine was founded in 1982, and is a
Danish company that is located just north of Co-
penhagen.
For more than 20 years Danelec has been closely
related to the Royal Danish Navy (RDN), as both
a supplier of specialized industrial products as
well as partner in several larger computer based
projects.
In 2001 the RDN chose Danelec as designer and
supplier of several computer based products as
part of an upgrade of 31 major vessels where the
NAVY VDR was an integrated part.
Te real break-thru came in 2003, when
Danelec developed and sold the 1st generation
VDR (Voyage Data Recorder) that was an IMO
carriage requirement.
Having a solid background in the maritime indus-
try, longstanding employees with great experience
and a dynamic team, Danelec values good quality
and outstanding support.

Products
Danelec is proud and pleased to introduce the new
and 2nd generations of VDR products which ofers
state-of-the-art technology, and which is designed
with a high focus of fexibility and reliability.
Te S-VDR and G2VDR solutions are extremely
compact and light weight solutions, and are sim-
ple and cost-efective to install and maintain.
Te systems meet the requirement of IMO per-
formance standard MSC.163(78) and complies
with IEC standards IEC 61996-1/2 and IEC 60945,
and is fully approved by Bundesamt fr Seeschif-
faahrt und Hydrographie (BSH).
Finally the products are of a modular and fexile
design, where the S-VDR can be to a fully IMO
A.861(20) compatible VDR by adding only an
interface box.
Te Danelec S-VDR will be serving the
international retroft market for vessels above
3000 gross tons constructed before July 1st, 2002.
Te products are fully supported by the Danelec
Marine worldwide distribution network.
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
DAnfoSS A/S | 25
dANFOSS A/S
DK-6430 nordborg
T +45 74 88 22 22
F +45 74 49 09 49
Danfoss@danfoss.com
www.danfoss.com/ia
contacts:
Per Snderriis
E-mail: PrS2@danfoss.com
Danfoss G.m.b.H.
Siemensstrasse 25
D-70825 Korntal-Mnchingen
GErMAnY
T +49 (0)7150 953-0
F +49 (0) 7150 953-255
vertrieb@danfoss-sc.de
www.Danfoss.com/germany
P R O d u C T S
Pressure Transmitters
Temperature Sensors &
Transmitters
Temperature & Pressure
Switches
Solenoid valves
1BSUOFSTIJQCBTFEPOBDDPVOUBCJMJUZ
) . $ 5 3 4 2 ) ! , ! 5 4 / - !4 ) / .
As a global enterprlse ln the hlghly com-
petltlve marlne and englne sectors, Danfoss
|ndustrlal Automatlon brlngs together a wealth
of talent and a strong commltment to provld-
lng our customers wlth a competltlve advan-
tage through lndustrlal control solutlons that
make a dlfference to the bottom llne.
we alm to measurably lmprove the perform-
ance and rellablllty of your monltorlng and
control systems. And wlth a proven track
record throughout the world, we have the
experlence to prove lt.
&YQFSULOPXMFEHFPGNBSJOFBQQMJDBUJPOT
Marlne appllcatlons are often crltlcal appllca-
tlons wlth essentlal elements. |f they go down,
so do your proflts. we deslgn our pressure
and temperature controls to maxlmlze uptlme
and mean tlme to repalr. They provlde safe,
efflclent operatlons to ensure that your equlp-
ment - and your proflts - stays up.
we have 60- plus years of experlence, and lev-
erage thls knowledge to posltlvely lmpact your
operatlons.
Our marlne controls offerlng ls one of the
world's best, as proven ln compressors, gear
boxes, englne and propulslon systems, englnes
and countless other appllcatlons around the
globe. Our people have the experlence to pro-
vlde control solutlons and servlce.
MAK|NG MODLPN L|v|NG POSS|8LL
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
26 | DAnfoSS SEMco A/S
dANFOSS SEMCO A/S
FIRE PROTECTION
Svendborgvej 253
DK-5260 odense S
T +45 70 26 38 01
F +45 70 26 38 02
semsafe@danfoss-semco.com
www.danfoss-semco.com
contacts:
Palle Madsbjerg
Truels Jepsen
Danfoss Semco A/S
fire Protection
Stamholmen 111
2650 Hvidovre
T +45 36 34 47 10
F +45 36 34 47 11
freprotection@danfoss-semco.com
www.danfoss-semco.com
contacts:
flemming Damsgaard
P R O d u C T S
co
2
High pressure systems
co
2
Low pressure systems
Water Mist High pressure systems
fine Water spray systems
Low pressure sprinkler systems
Deck foam systems
Dry chemical powder systems
HvAc systems
Water mi st
system
Foam Fi re exti ngui shi ng
system
Dry Chemi Cal PoWDer Fi re
exti ngui shi ng system
Fi re Fi ghti ng at sea
Safety at Sea is an important issue and the international maritime organizations
have laid down new and more stringent specifcations for reliable fre protection
systems. for many years, Danfoss Semco a/S fire Protection has been an active player
in this positive process and has committed major resources to the development and
approval of efective systems.
Danfoss Semco a/S fire Protection has considerable expertise within design, produc-
tion, installation and service of fxed fre fghting systems with CO
2
, other gasses, powder,
foam and Sem-Safe water mist. We supply both individual systems and complete
packages.
hi gh & loW Pres sure
Co
2
systems
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
DAniSH inTErior A/S | 27
Design & Interior Outtting
dANISH INTERIOR A/S
Troensevej 16
DK-9220 Aalborg
T +45 98 15 98 88
F +45 98 15 98 84
info@danishinterior.dk
www.danishinterior.dk
contact:
ren fich Jespersen,
Managing Director
rfj@danishinterior.dk
carsten Meyer, Sales Director
cm@danishinterior.dk
Branch offce:
Danish interior uS
2300 E. Las olas Blvd. 2nd floor
ft. Lauderdale
33301 florida, uSA
contact:
David Weisberg
dw@danishinterior.com
P R O d u C T S
Turnkey interior projects:
Design
outftting
installation
Project Management
Supervision
Material Supply
DANISH INTERIOR is your best choice when selecting partner in
large-scale turnkey projects.
Our competencies are implementation of projects with complicated
architectural design elements and integrated decorative alignments,
which require high demand for quality within a short period of time.
Our team of in-house designers and project managers will cooperate
closely with you from initial project conception to fnal successful delivery.
DANISH INTERIOR is among the most experienced turnkey suppliers
in the world for public areas on cruise vessels and passenger ships.
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
28 | DAnLAMP AS
Nygade 12
DK-6200 Aabenraa
Tel.: +45 74 62 22 66
www.danlamp.com
Since 1931 in Denmark we have developed, produced and marketed incandescent lamps to far-reaching places,
to customers who demand quality and accuracy in the use of artifcial light. Our aim is to maintain and develop the
special and individual incandescent lamps which our company has come to be known for.
It is RIGHT that SM Navigation is a world
famous trademark. Our products are
handmade incandescent lamps of the highest
quality. Each lamp is tested manually before
it is set out to sea.
It is RIGHT that the navigation lamp is a
vital part of a ships security system,
where lifetime and reliability are
important.
It is RIGHT that all SM Navigation lamps
are approved according to international
standards: DIN 49 841, NS 2785 and UL
1104.
It is RIGHT that our lamps cost a little
more than some others, but their
long lifespan makes them more cost
effective in the long run.
Probably, it is WRONG not to choose
SM Navigaton lamps.
Whats
right or wrong?
dANlAMP AS
nygade 12A
DK-6200 Aabenraa
T +45 74 62 22 66
F +45 74 62 80 69
info@danlamp.dk
www.danlamp.dk
P R O d u C T S
navigation lamps
Boat lamps
Signal lamps
rough-service lamps
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
DAnSK WiLTon A/S | 29
dANSK WIlTON A/S
Hjskolevej 3
Birk
DK-7400 Herning
T +45 97 12 33 66
F +45 97 12 59 71
dw@dansk-wilton.dk
www.dansk-wilton.com
contact:
Bjrn Sadolin
Jacob rskov
P R O d u C T S
contract colorTec
contract Axminster
contract Graffc
contract Handtuft
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
dANTEC dYNAMICS A/S
Tonsbakken 16-18
DK-2740 Skovlunde
T +45 44 57 80 00
F +45 44 57 80 01
info@dantecdynamics.com
www.dantecdynamics.com
contacts:
Jrgen frandsen
Sales Manager
joergen.frandsen@
dantecdynamics.com
Know your turbochargers
speed and rotation at a glance!
DISATAC is a series of rugged, non-contact electronic
tachometers.
DISATAC monitors rotational speed in all types of high-
speed turbochargers and all kinds of rotating machinery.
Facts about DISATAC:
Ensures optimal, reliable and long-lasting performance
Lloyd's Register Type Approval Certificate for marine,
offshore and industrial applications
More than 25,000 systems delivered worldwide
Easy to install
P R O d u C T S
Electronic tachometers
Meters - analog and digital
Pickups and magnets
Electronic limit switches
Pickup selector switches
- 2, 4 or 8 input channels
30 | DAnTEc DYnAMicS A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Company name |
COMPANY NAME
adress
City
T +45 99 99 99 99
F +45 99 99 99 99
mail-adress
Web-adress
Contacts:
Contact-name
mail-adress
P R O D U C T S
products
products
products
products
products
Format
140 x 240 mm
Logo (eps-format)
At sea
in control
DEIF is an experienced player in the international markets for ma-
rine bridge instrumentation, engine & gen-set controls and switch-
board instrumentation. Since 1933, we have given our customers a
competitive edge by delivering state-of-the-art solutions based on
superior product quality, fexible functionality, service and commit-
ment.
We take pride in cooperating with our customers to develop the
necessary solutions. Solutions which one can rely on, even un-
der the harshest weather conditions. That is the very meaning of
Power in Control it characterises everything we do.
P R O d u C T S
illuminated bridge indicators
Switchboard instrumentation
Wind measuring systems
Power Management solutions
dEIF A/S
frisenborgvej 33
DK-7800 Skive
T +45 96 14 96 14
F +45 96 14 96 15
deif@deif.com
www.deif.com
DEif A/S | 31
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
dElTA
dANISH ElECTRONICS
light & Acoustics
venlighedsvej 4
DK-2970 Hrsholm
T +45 72 19 45 00
F +45 72 19 40 01
customercentre@delta.dk
www.delta.dk

P R O d u C T S
Specifcation of requirements
Design review
Prototype testing
EMc, climatic, mechanical
and acoustic consultancy
Type approval testing
We help ideas meet the real world
Test and
consultancy
32 | DELTA
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
DEn-JET MArinE PTE LTD. | 33
dEN-JET MARINE PTE lTd.
10 Tractor road #W2-M6B
Singapore 627971
Singapore

T +65 62 68 12 38
F +65 62 68 22 70

denjetmarine@denjet.com
www.denjet.com

contact:
Lars K. nielsen
P R O d u C T S P R O d u C T S
Ship outft and equipment
Why Water Blasting :
Vessel owners spent millions of dollars on marine coating systems in
order to protect the steel against corrosion - despite that many
vessels only get a hammer or a pneumatic tool for surface
preparation Does that make any sense!!!
The water blasting equipment provides fast/effective and
environmentally safe removal of any deposits from steel structures
on deck, hatch covers, top side, ballast tanks and pipes. The user
friendly design and features makes it easy for the crew or riding
squad to maximize the surface preparation during voyage.
is manufacturing in Denmark and has full facilities in
Singapore. We are ready to assist you 24/7.
Den-Jet
Den-Jet
DEN-JET - WATER BLASTING MADE EASY
DEN-JET WATER JETTING EQUIPMENT
WATER BLASTERS
FOR THE MARINE
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
dESMI
MARINE & OFFSHORE
Tagholm 1
DK-9400 nrresundby
T +45 96 32 81 11
F +45 98 17 54 99
marine@desmi.com
www.desmi.com
contacts:
Henrik Mrkholt
Direct phone: +45 96 32 81 28
hms@desmi.com
P R O d u C T S
Ship outft and equipment
Machinery outside
engine spaces
Main and auxiliary
machinery components
cargo handling outft and
equipment
DESMI pumps
integrate
knowledge & technology
Vertical in-line centrifugal
pumps - type NSL & SL
Capacity range: 10-1400 m/h
Pressure range: 5-220 mWC
Horizontal gear pumps - type ROTAN
ED/GP/HD
Capacity range: 1-170 m/h
Differential pressure: Up to 16 bar
DESMI Marine Pumps -
The Naturel Choice for high quality
pumps
Thousands of DESMI marine pumps at work on the
Seven Seas have proved our customers satisfaction
with the performance of our pumps.
Having supplied marine pumps for decades we know the
owners demands for many years of trouble-free opera-
tion. We offer +100 different types and designs which
ensure the right pump to t the job.
We offer global service from 50 dis-
tributors all over the world. Spare parts
are available from stock at resonable
costs.
Cargo pumps - submerged deepwell pumps,
booster and horizontal cargo pumps - type
DESWELL, DESBOOST and DESCARGO
Capacity range: 20-1000 m/h
Pressure range: 50-200 mLC
Temperature: -104C - +150C
34 | DESMi
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
HANSEN CHAIRS
E. vEJvAd HANSEN
Darumvej 145 B
DK-6700 Esbjerg
T +45 75 13 19 44
F +45 75 13 43 13
mail@hansenchairs.com
www.hansenchairs.com
P R O d u C T S
Ship outft and equipment
Wheelhouse Chairs type BX 502/Lif with Deck Track R 205/1
E. vEJvAD HAnSEn | 35
EllEHAMMER A/S
Ejby industrivej 70
DK-2600 Glostrup
T +45 43 45 50 55
F +45 43 45 57 06
ellehammer@ellehammer.dk
www.ellehammer.dk
contacts:
Bruno Wigandt
President
T +45 43 45 50 55
wigandt@ellehammer.dk

fie Hjlmhof
Marketing Manager
T +45 43 24 50 56
hjaelmhof@ellehammer.dk
P R O d u C T S
Ejector Pumps
Emergency fire Pumps
%LLEHAMMEREJECTORPUMPS are able to
bllge unoer all conoltlons. Tbls makes an ejector
pump tbe sa|e solutlon.
Wltb an ejector pump tbe rlsk o| blocklng ls
close to be ellmlnateo, because tbe partlcles
ls slmply olscbargeo wltb tbe water. 8esloes
belng sa|e tbe ejector pumps are etremely
robust ano tbey are oeslgneo to meet tbe
tougb marltlme oemanos. |nltlal ano operatlng
costs o| ejectors are low ano rellablllty ls very
blgb. Tbey requlre no malntenance, as tbey
oon't contaln any movlng parts.
Tbere are more tban 50.000 Lllebammer
ejectors ln servlce ln tbe marlne sector all
over tbe worlo. Many more are on tbelr way.
:/./, /a // /ar./ /ro
Ljector
Pumps
Lmergency
Flre Pumps
%LLEHAMMEREMERGENCYlREPUMPS are
etremely rellable wltb a wloe capaclty range
ano sa|e, e||ectlve suctlon ano prlmlng. Furtber-
more tbe pumps bave a sel|-oralnlng |unctlon,
wblcb means tbat |rost oamages are avoloeo.
Tbls ls an aooeo sa|ety bonus, because tbe
pump wlll work unoer all conoltlons, sboulo
an emergency occur.
An Lllebammer emergency re pump
ls a very e||ectlve ano sa|e re gbtlng
oevlse ano ls tbere|ore essentlal on
many sblps.
Tbe re pump systems are especlally
sultable |or large re water capacltles.
Lllebammer re pumps are oeslgneo
especlally |or tbe lnolvloual customer
to sult tbe speclc neeos ano oemanos.
/||.|:oo.r //../r /ao/ :a4
/o.r.a., //r. /ao/
/a.. I+
36 | ELLEHAMMEr A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
EMco conTroLS A/S | 37
EMCO CONTROlS A/S
dalsvej 50
DK-2970 Hrsholm
T +45 45 76 94 00
F +45 45 76 94 01
emco@emco.dk
www.emco.dk
P R O d u C T S
Level Switches
Emco Liquid Level Switches
EMCO level switches have a modular design
which ofers excellent fexibility to suit the many
diferent applications within the marine industry.
Among the many advantages is the all-stainless
steel construction.
Te EMCO level switches have been thoroughly
tested by an independent accredited testing com-
pany.
Te level switches are type-approved by major
classifcation societies.
Controls
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
FORCE TECHNOlOgY
Division for Maritime industry
Hjortekrsvej 99
DK-2800 Kgs. Lyngby
T +45 72 15 77 00
F +45 72 15 77 01
dmi@force.dk
www.force.com
contacts:
christian Schack
Head of Department
Hydro & Aerodynamics
Peter Krogsgaard Srensen
Head of Department
Training, Ports and Human factors
Bo caspersen
Sales Manager
Training, Ports and Human factors
Henrik Hassing
Head of Department
industrial Processes
cathrine M. Steenberg
Head of Department
Simulation and iT
P R O d u C T S
consultants
Electrical and automation
FORCE Technology
Provider of Maritime Technology and know-how
FORCE Technology is an international know-
ledge and technology-based service provider. Our
customer base is wide and consists amongst others
of the oil and gas industry and the maritime
industry.

In total FORCE Technology employs more than
1,100 highly qualifed employees in Denmark, Swe-
den, Norway, Russia, Holland, USA, and Brazil.

Te Division for Maritime Industry provides:
- Initial design studies utilizing CFD and simula-
tion techniques
- Advanced RANS based CFD calculations
- Towing tank tests
- Wind tunnel tests
- Crew simulator training
- Human factors management
- Port engineering studies

Our clients are leading consultants, shipyards, and
ship owners all over the world. Our know-how
and expertise includes virtually all types of vessels
such as container vessels, tankers, bulk carriers,
tugs, passenger vessels, ofshore vessels, ofshore
platforms, etc.

Furthermore, we provide the following products
to ship owners, operators, and maritime training
organizations:
- Loading computers
- Onboard decision support tools
- Full-mission simulators

Our services and products have always been ori-
ented towards market needs and requirements.
We constantly strive to develop our skills, facilities
and test methods to meet the challenges presented
by our clients.
Detailed visual model
38 | forcE TEcHnoLoGY
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
fuELSAMPLEr.coM APS | 39
FuElSAMPlER.COM APS
Tinvej 16
DK-3060 Espergrde
T +45 49 13 69 00
F +45 49 13 69 02
denmark@fuelsampler.com
www.fuelsampler.com
contacts:
Poul rasmussen
John Knudsen
P R O d u C T S
MArPoL AnnEx vi
Automatic and Manual
fuELSAMPLEr.
We have the widest range of automatic fuel bunker samplers available today, from the fuel sampler
MO 5051 to the fuel sampler MO 7014, suitable for most applications.
All fuel samplers comply with MARPOL 73/78 ANNEX VI, 4.2 MECP96/47.
All fuel samplers are made in AISI 316 stainless steel.
All our bunker samplers are automatic continuous drip samplers of the time proportional type
If you have any questions or need any assistance fnding the right fuel sampler for your needs; please do
not hesitate to contact us.
Fuelsampler.com ApS is the designer and manufacturer of the only true automatic fuel- and drip sampler.
MOT 5051 Mobile Fuel Sampler
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
G & O Micro-
bac Biologi-
cal Sewage
Treatment
Plant
Te G & O Bio-
reactor is ofering
full treatment of
both Grey & Black
water. It is deliv-
ered in stainless
steel (including
Duplex & Titanium)
and in mild steel coated
with phenolic epoxy. Te G & O MBR Bioreactor is a Fixed
Film Matrix system that provides major advantages for the
operators. It is twice as efective as the traditional types of
active sludge plants, and is tested with the use of UV light
for sterilisation eliminating any use of chemicals. It has
low maintenance requirements. Te system is delivered as
a standard unit or as designed to meet customer specifc
requirements. Te system is ideal for installation on sailing
vessels and Of-Shore Rigs and is fully approved by DNV,
ABS, USCG according to IMO regulations MEPC (VI)
Annex IV and the NIAG standard.
gERTSEN & OluFSEN AS
Savsvinget 4
DK-2870 Hrsholm
T +45 45 76 36 00
F +45 45 76 17 73
mdc@gertsen-olufsen.dk
www.gertsen-olufsen.dk
contact:
Michael D. christensen
Jens ulrik nielsen
T +45 45 16 41 91
F +45 45 76 17 73
P R O d u C T S
Main and auxiliary
machinery components
Machinery piping
and fttings
GERTSEN & OLUFSEN AS Denmark
We supply systems that ensures safe & constant
operation of any ship or of-shore installation
G & O Vibration Compensator
Gertsen & Olufsen and their moment compensators are
world leaders in eliminating unwanted vibrations and
improving the performance and comfort of ships, power
plants and of shore steel structures.
Te company has specialized in the development, production,
installation and sale of electrically driven moment compensa-
tors. Te product has got an extensive reference list which can be
sent upon you request.
Gertsen & Olufsen, has its of ces north of Copenhagen, and has since 1945 been one
of the biggest suppliers of equipment and systems to the Danish Marine Industry. With
the introduction of the below products, Gertsen & Olufsen has become a new dedi-
cated world-wide supplier of specialized products to the international marine markets.
G & O SafePage 3000(TM)
Wireles Paging, Informa-
tion and Alarm System
is providing true two-way wireless
communication on-board between
a number of Handsets and a Master
Unit installed on the Bridge or in
the Engine/Cargo Control Room.
It ofers paging and information
transfer including interfaces to
telephone system and other systems
on-board including alarm list etc.
Also a Dead Man timer is installed
and an Emergency Button.
G & O Survey Water (in oil) Monitor
which provides a continuous and accurate monitoring of
water contamination in fuel oils, lub oils & hydraulic oils.
By detecting water content down to as low as 0,03% the G &
O Surver Water Monitor prevents malfunctions and abrupt
break-downs of Engines, Trusters, Azipods, Gears & Sta-
bilizers and thereby ensuring a safe operation of any vessel.
Te Survey Water Monitor system is now being launched in
2 base models, which covers almost any type of application
on any type of vessel or Oil platform.
40 | GErTSEn & oLufSEn AS
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
GrEnAA MoTorfABriK A/S | 41
gRENAA MOTORFABRIK A/S
Sdr. Kajgade 1-5
DK-8500 Grenaa
T +45 86 32 06 66
F +45 86 32 63 90
info@grmo.dk
www.grmo.dk
P R O d u C T S
Diesel Engines
reduction gears
cP-propeller systems
Grenaa Marine Systems
Products to last a lifetime
For more than a century
A/S Grenaa Motorfabrik has
been manufacturing high
quality marine systems. Our
philosophy is to incorporate
the highest reliability into the
design of all equipment.
True heavy duty
equipment
Diesel engines
Reduction gears
CP-propeller systems
Full propulsion systems
Service intervals are long
and all units can be cost
effectively refurbished to as-
new standard. Even design
of new components is done
bearing retrots in mind so
owners can update their
equipment if desired.
We believe in solid engi-
neering and classic craft-
manship.
Grenaa Diesel engines
The Grenaa Diesel engines are built with a
keen dedication to the nest of mechanical
engineering. Our diesels are non-electronic
and uncomplicated yet very efciently
performing machines. A/S Grenaa Motor-
fabriks century long experience in building
long lived difcult-to-break and simple to
repair engines is our trademark.
Reduction gears
Reduction gears for medium speed Grenaa
Diesel engines and CP-propellers are
manufactured. The Grenaa Diesel reduc-
tion gears are designed for medium speed
engines combined with CP-propeller sys-
tems. The gears are delivered with built-in
CP-propeller controls and with reduction
ratios of 1:2,14, 1:2,64 and 1:3,22 and
with PTOs if required.
CP-propeller systems
Grenaa CP-propeller systems are supplied
for operation with any high-speed or me-
dium speed engine. The propellers have op-
timized designs for vessels with speed up to
20 knots. All propeller systems are designed
so that they can be overhauled to as-new
standard without exchange of major compo-
nents. Computer analysis of the propulsion
characteristics and shaft vibrations are per-
formed for each system delivered.

Grenaa complete propulsion systems
Complete propulsion systems with engine,
reduction gear and CP-propeller is our typ-
ical supply. This ensures a perfect match
with optimum operating economy. Further,
all propulsion equipment from one source
ensures high quality and cost savings in
service works.
GRENAA MARINE SYSTEMS
Heavy duty propulsion equipment
GRENAA DIESEL
Diesel Engines : Range 600-1630 HP at 500-1000 rpm
Reduction gears : Range 500-1500 HP at 500-1000 rpm (input)
CP-propeller systems : Range 150-2200 HP
Diametres 1100-3000 mm with or without nozzles
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
gRuNdFOS A/S
Poul Due Jensens vej 7
DK- 8850 Bjerringbro
T +45 87 50 14 00
F +45 87 50 14 02
contacts:
Peter rsted
Product and Application Specialist
poersted@grundfos.com
To learn more, please visit:
www.grundfos.com
Crundfos pumps
offer peace-of-mind at sea
- and signihcanI savings
SS1LM kWh]year LUkO
(0.08 LUk]kWh)
ConvenIional 993,S00 t 79,480
GrundIos Rydro S79,8S0 t 46,388
Annual savings 413,6S0 t 33,092
GrundIos Rydro pressure boosIer
sysIems are virIually mainIenance-Iree
and oIIer reliabiliIy second Io none.
1he exIremely energy-eIhcienI boosIer
sysIem always adapIs iIs ouIpuI Io Ihe
immediaIe demand, and never wasIes
unnecessary energy. ln addiIion, iI is
one oI Ihe mosI exible and compacI
sysIems on Ihe markeI.
GrundIos is one oI Ihe world's leading pump manuIacIurers. As a Iull-line supplier oI innovaIive
pump sysIems Ior Ihe marine indusIry, GrundIos has exacIly Ihe sysIem you require, whenever and
wherever. Our global presence means IhaI Ihe nexI GrundIos service cenIre or parIner is never Iar
away.
8ased on a real cruise ship case, Ihe calculaIion
below can give you an idea oI Ihe poIenIial savings
wiIh a GrundIos L-pump soluIion.
P R O d u C T S
Portable water /
Water Treatment
Steam and hot water
boiler feed
Seawater cooling side
HvAc
fresh Water Low temp
& High temp.
42 | GrunDfoS A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
HAMWorTHY SvAnEHJ A/S | 43
Reliability of Cargo
pumping system is important
Hamworthy Svanehj A/S long presence in this field is proof of high
quality and dependable products.
Svanehj's technologically advanced deepwell cargo pumps for product,
chemical, and gas tankers are known world-wide.
The first ones were installed in the late sixties, and since then there has
been a rapid development. Today a large part of the world fleet is equip-
ped with our pumping systems.
The Svanehj range of deepwell cargo pumps includes designs for:
Product tankers
Chemical tankers
LPG, ethylene, ammonia, and ethylene/chemical tankers
Molten sulphur tankers
Coastal tankers
Barges
Environmentally
friendly Deepwell
Cargo Pumps
Electric driven Deepwell Cargo Pumps
from Svanehj is the best solution for
tanker operators to meet the
requirements for a safer environment.
Lower NO
X
emission.
No hydraulic oil spillage.
No noise when discharging.
Lower fuel oil consumption.
HAMWORTHY SvANEHJ A/S
fabriksparken 6
DK-9230 Svenstrup J
T +45 96 37 22 00
F +45 98 38 31 56
svanehoj@hamworthy.com
www.svanehoj.com
contact:
Erik Lindkvist
elindkvist@hamworthy.com
P R O d u C T S
Deepwell cargo Pumps
Deepwell Ballast Pumps
Switchboard for cargo Pumps
Booster Pumps
Hydraulic Driven Portable pumps
Automatisk Stripping Systems
Selfpriming Ejector units
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Te A/S Henning Frkjr Marine Division is re-
sponsible for the installation and refurbishment of
teak decks on cruise ships.
Teak decks
Teakwood is very well-suited to ship decks due to
its hardness, resistance to wind, weather and seawa-
ter, and good working properties. It is beautiful and
easy to maintain, as well as comfortable to walk on
in both warm and cool weather.
Luxury parquet oors
A/S Henning Frkjr has many years experience
with manufacturing and ftting luxury parquet
foors in restaurants and discos, on dance foors
and stages.
Our parquet foors are made of teak, merbau, bell-
inga, ash, or other wood types. Te wood is always
of the highest quality, and only the imagination sets
the limits for the possible decorative patterns.
Other products in teak
Teakwood is not just used for ship decks and foor-
ing, but also for steps, grates, benches and rails.
A/S Henning Frkjr is a leader on the world market
when it comes to teak decks for cruise ships
Laminated teakwood is used for arched or curved
surfaces. We manufacture steps, rails, benches, etc.
in our own workshop in Denmark, according to
your specifcations.
Refurbishment/repair work
Even the most solid teak deck can be damaged,
especially in busy places. A/S Henning Frkjr
repairs damages to decks and joints both decks
we have ftted ourselves and decks ftted by other
companies.
We can also polish the surface so the teak deck
looks like new.
Our service team consists of qualifed and experi-
enced staf who are ready to travel to shipyards all
over the world and work on the ships.
Our teak decks signal exclusivity and luxu-
ry down to the smallest detail.
A/S HENNINg FRKJR
Lillebaeltsvej 7
DK-6715 Esbjerg n
T +45 75 14 11 22
F +45 75 14 52 52
hf@hf-esbjerg.dk
www.hf-esbjerg.dk
contacts:
Johnny freund
jf@hf-esbjerg.dk
Local info:
A/S Henning frkjr
P R O d u C T S
Teak decks
Luxury parquet foors
Teak handrails
Teak gratings
Teak steps
44 | A/S HEnninG frKJr
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
HYDrA TEcH A/S | 45
P R O d u C T S
Teak decks
Luxury parquet foors
Teak handrails
Teak gratings
Teak steps
HYDRA tech cylinders are key components in
a vast number of marine/offshore operations
involving transfer of power and movement.
The quality of these cylinders is thus crucial in
ensuring a satisfactory functioning of a wide
range of different equipment. Marine/Off-
shore environment involves a demanding test
of reliability, where hydraulic cylinders often
have to work under extreme loadings and in
unpredictable and harsh conditions.
Hydraulic cylinders for use in conjunction
with installations are distinctive as they are
often specially designed for one-off assign-
ments. The marine/offshore industry is also
known for their stringent quality and docu-
mentation requirements in order to meet the
classifcation society requirements. HYDRA
tech focuses on:
Traceability of all designs and components
Full documentation for manufacture, installa-
tion and operation
fully certifed welding procedures
ongoing monitoring of manufacturing pro-
cesses
full documentation of admini-strative proce-
dures, as well as all testing and approval
ISO 9001, ISO 14001, DNV - MSA agreement.
Part of HYDRA techs fexibility comes from
our focus on innovation, particularly in the
areas of:
Use of new materials, such as ceramics and
composites
Electronic sensor systems
New products
New surface treatments
Whether you need a standard marine quality
cylinder, or customized products such as
compensators or accumulators, we are able to
assist you.
We look forward to seeing you at our stand
No. xx:
HYDRAULIC CYLINDERS
HYdRA TECH A/S
Sigenvej 2
DK-9760 vraa
T +45 98 98 02 00
F +45 98 98 02 10
info@hydratech.dk
www.hydratech.dk
contacts:
Jesper S Srensen
jss@hydratech.dk
Bent Srensen
bs@hydratech.dk
HYDrA TEcH, Suzhou, china
contacts:
Su-Yong chong
chong@hydatech.com.cn
Bent Srensen,
bs@hydratech.dk
P R O d u C T S
Ship outft and equipment
Main and auxiliary
machinery components
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
IBM
Lyngbyvej 2
DK-2100 copenhagen
T +45 45 23 30 00
F +45 45 24 27 13
www.ibm.com
contacts:
Lars A. naef
Account Manager
lan@dk.ibm.com
Sren Schledermann
Sales Manager
schleder@dk.ibm.com
info:
if you would like more
information about specifc
options or a demo of our solutions,
please contact our team at;
LoADSTAr@dk.ibm.com
crewmail@dk.ibm.com or
crewmanager@dk.ibm.com
P R O d u C T S
Loadstar
crew Mail
crew Manager
IBM Marine Solutions
IBM Marine Solutions is a total provider to ship-
ping companies. We take responsibility for all IT-
related tasks - including development, implemen-
tation, facility management and maintenance.
Our services may be combined with advice for
instance on the interaction between technology
and business procedures.
We have more then 30 years experience as a pro-
vider for the shipping industry. We have extensive
knowledge of a shipping companys daily work
and its business challenges. Our solutions cover
most aspects of shipping operations.
Our experience includes solutions within supply
chain management, cargo handling, equipment
management, customer service, sales and market-
ing, overland transport, operation of terminals,
management of containers and vessels as well as
fnance.
Te major part of our solutions is used by ship-
ping ofces on shore. But we also develop solu-
tions to be used on board the vessels solutions
that can be integrated with IT-systems on shore.
IBM Marine Solutions ofers several sofware
solutions for use onboard vessels - CREW MAIL,
CREW MANAGER and LOADSTAR.
CREW MAIL - cost efective and complete e-mail
system designed specially for seafarers - inde-
pendent of satellite vendors.
CREW MANAGER a fexible and comprehen-
sive administration solution managing admin-
istrative tasks of the vessel: Crew management,
payroll, vessels account, radio counts, port call
administration, vessel certifcates, rest hour regis-
trations etc. Te solution is used on more than 300
vessels globally.

LOADSTAR - a fexible and efcient loading
computer system enabling ofcers onboard the
vessels to reduce the workload and improve deci-
sion making. LOADSTAR not only meets all Clas-
sifcation Society requirements. It ofers strength
and stability calculations, cargo planning and a
wide range of unique vessel management facilities
in a single program.
46 | iBM
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
inExA A/S | 47
P R O d u C T S
Ship outft and equipment
INExA A/S
Hovedgaden 483
DK-2640 Hedehusene
T +45 46 56 37 00
F +45 46 56 04 66
info@inexa.dk
www.inexa.com
The Worlds leading
brand in
marine interiors
With production plants in Hedehusene, Denmark and in Nantong, China we cover world wide
the demands for high quality interior accommodation to commercial ships, offshore platforms,
navy ships, luxury yachts, ferries and cruise ships.
TNF Interiors are specialized in superior technology products for the interior accommodation,
which can be manufactured individually according to your specific requirements. We have
global resources to service you, and we will be there when you need us anywhere in the
world, speaking your language, understanding your situation. We make no compromises in
product quality and customer service.
After more than 30 years of experience, we posses in our company the best standards, know how
and technology, and our products are of the highest quality and precision.
TNF is the most famous brandname in the world within interior accommodation products, and
the TNF name has over the years become an institution in the business. TNF stands for: Thermal,
Noise and Fire Resistance. These are extremely important standards, which we of any fully
understand and are responsible for.
Our products can be delivered with pvc foil, painted surface or in the Award-winning surface,
TNF Magic which is the safest surface for interior accommodation in the world.
TNF wall panels
TNF ceilings
TNF door s
TNF wet units
TNF inspection hatches
TNF JIT Kit
TNF JIT Cabin
TNF Magic
INEXA A/S, Hovedgaden 483, DK-2640 Hedehusene, Denmark
Tel: +45 46 56 37 00, Fax: +45 46 56 04 66, Mail: info@inexa.dk, Website: www.inexa.com
Annonce 30012006.pmd 31-01-2006, 09:31 1
The Worlds leading
brand in
marine interiors
With production plants in Hedehusene, Denmark and in Nantong, China we cover world wide
the demands for high quality interior accommodation to commercial ships, offshore platforms,
navy ships, luxury yachts, ferries and cruise ships.
TNF Interiors are specialized in superior technology products for the interior accommodation,
which can be manufactured individually according to your specific requirements. We have
global resources to service you, and we will be there when you need us anywhere in the
world, speaking your language, understanding your situation. We make no compromises in
product quality and customer service.
After more than 30 years of experience, we posses in our company the best standards, know how
and technology, and our products are of the highest quality and precision.
TNF is the most famous brandname in the world within interior accommodation products, and
the TNF name has over the years become an institution in the business. TNF stands for: Thermal,
Noise and Fire Resistance. These are extremely important standards, which we of any fully
understand and are responsible for.
Our products can be delivered with pvc foil, painted surface or in the Award-winning surface,
TNF Magic which is the safest surface for interior accommodation in the world.
TNF wall panels
TNF ceilings
TNF door s
TNF wet units
TNF inspection hatches
TNF JIT Kit
TNF JIT Cabin
TNF Magic
INEXA A/S, Hovedgaden 483, DK-2640 Hedehusene, Denmark
Tel: +45 46 56 37 00, Fax: +45 46 56 04 66, Mail: info@inexa.dk, Website: www.inexa.com
Annonce 30012006.pmd 31-01-2006, 09:31 1
TNF Interiors, the worlds leading brand in ma-
rine interior systems, is established with pro-
duction sites in Hedehusene, Denmark and in
Nantong, China. In our companies we have
implemented the absolute latest technology
and together with strong investments, we are
offering the absolute best quality in the world
to fully satisfy you and your customers by us-
ing TNF Interior Accommodation Systems.
INEXA was established in 1973, and is today
the leading supplier of marine accommo-
dation systems worldwide, and recognized
through our TNF as being the world leading
brand name. TNF is not only our brand name.
It is an institution in the shipbuilding industry.
Being a dedicated and innovative company
and using strong resources on R&D, we are
known in the market for being the FIRST.
Milestones where TNF has been FIRST:
1973 First with TNF sandwich wall panel
with closed joints
1976 First with the TNF Modular System
1982 First with 44 dB noise reduction wall
panel
1989 First with advanced CAD System
for interior design
1990 First with the halogen free and non toxic
surface TNF Pacifc
1990 First with ISO 9001 approval
1997 First with the halogen free and non toxic
surface TNF Magic
2000 First with TNF JIT Cabins
2000 First with TNF JIT Kit System
2004 First with Safety Award of TNF Magic from
Lloyds Register and Royal Institution of
Naval Architects
2005 First with two complete production sites
in Europe and Asia
As TNF Interiors is now operating from two
production sites with identical technology,
products and high quality, the shipbuilding
industry in your country will be able to enjoy
global advanced products and service at
home without going through complicated
importing procedure. We can offer specifc to
you the best quality of
TNF Interior Accommodation Systems within:
TNF Wall Panels TNF Ceilings
TNF Marine Doors TNF Inspection Hatches
TNF KIT System TNF JIT Cabins
TNF Bathrooms TNF Window Boxes
TNF Accessories TNF Magic
We welcome each and every one of you
to take part in our new exciting journey by
bringing us to you.
We wish you a very welcome to TNF Interiors!
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
INSTRuMATIC A/S
Ellemosen 5
DK-8680 ry
T +45 86 89 09 11
F +45 87 88 07 40
info@instrumatic.com
www.instrumatic.com
P R O d u C T S
Ship outft and equipment
Main and auxiliary
machinery components
Electrical and automation
IMO MARPOL 73/78 Annex
VI is a major issue for the ship-
ping industry. Marine diesel
engines must now meet the
testing, surveying and certif-
cation procedures required to
comply with Oxides of Nitro-
gen (NOX) emission require-
ments. Various Procedures
for demonstrating compliance
are possible but the direct
measurement and monitoring
method is the easiest way for
the shipowner to show current
compliance test data.
Te ability to measure oxygen
(O2) and other factors to in-
dicate engine performance is
an important consideration.
Other pollutant gases will
come under MARPOL regulation in the near
future and a way for ship owners to meet present
and future demands is needed. A safe and reliable
system with minimal maintenance requirements is
available using EZNO
X
Chemiluminescence NOx
monitoring probe.
INSTRUMATIC was founded in 1977, and has
since then accumulated experience in exhaust gas
measurements, developing various components
and systems, specially designed for marine use.
INSTRUMATIC manufacture its own produc-
trange under the registarted trademarks OX-
YTRON, OXYDAN and EZNOx.Te products are
manufactured to meet the highest quality stand-
ards, and are recognized by long lifetime and the
lowest cost of ownership.
Te EZNOx II On-board NOx Monitoring &
Verifcation system has been approved by DNV
(Type Approval Cert. No. A-10306) and (Type
Examination Cert. No. A-10324) to show full
compliance according to IMO MARPOL ANNEX
VI & MEPC103.49
A safe and reliable system with minemal main-
tenance requirements is available using EZNOx
II On-board NOx monitoring and verifcation
system.
INSTRUMATIC On-board NOx monitoring ex-
perience started in end 1980s and has since then
sold several systems for commercial, ferries and
cruise ships applications. And is today the leading
manufacture of NOx monitoring equipment for
marine use.
INSTRUMATIC product range is world wide rep-
resented via authorized distributors, system inte-
gration companies and engine manufactures.
Approvals
EZNOx II On-board DNV type approved/type
examinated NOx monitoring and
verifcation system.
DNV Type Approval Certifcate No. A-10306
DNV Type Examination Certifcate No. A-10324
Products
EZNO
X
On-Board NOx monitoring probe
for Diesel engines
OXYTRON Oxygen monitors for Inert gas and
combustion control
OXYDAN Stack Gas Dilution Probes
48 | inSTruMATic A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
ironPuMP A/S | 49
IRONPuMP A/S
Generatorvej 10
DK-2730 Herlev
T +45 44 91 67 88
F +45 44 91 16 44
iron@ironpump.dk
www.ironpump.com
contact:
Allan Kierkegaard
Sales Director
carsten Engel Andersen
Area Sales Manager
P R O d u C T S
Main and auxiliary
machinery components
Pumps for installation in the engine rooms of ships have ever
since the foundation of IRON been of prime importance for
the companys production and product development. In
addition to the many different types of centrifugal pumps, this
marketing area has seen the development of a number of
special pumps for specifc maritime uses, i.e. bilge pumps with
large suction capacity, hydrophore pumps, lubricating and fuel
transfer pumps, heeling pumps and ballast pumps with various
selfpriming devices, cooling water pumps, and fre-fghting
pumps.
Pump BD(H)V...
Pump BC...
BD(H)V. Vertical two-cylinder, double-acting piston pump with
built-on reduction gear, valve arrangement, air vessel and
safety valve.
BC. Horizontal single cylinder, double-acting piston pump,
V-belt driven incl. built-in valves, air vessel and safety valve.
The large suction capacity of the pumps makes them very suitable
as bilge and stripping ballast pumps, but as they are also able to
produce a relatively high pressure, they are often used as
combined bilge and fre pumps.
Capacity range: BD(H)V 25...300 m3/h
Capacity range: BC 0,5... 25 m3/h
Pump QVP...
Vertical selfpriming
double suction axial
splitcasing centrifugal
pump with manual
connection and
disconnection of the
forced traction priming
pump.
Pump QVEA...
Same pump with
pressure-
air operated priming
ejector - manual or
automatic operation.
This pump is mainly used
as ballast and bilge
pump. Capacity range:
40...3500 m3/h.
Pump CVLS...
Vertical submerged turbine pump
designed for a wide range of applications.
The construction is based on a modular
concept.
Number of column pipes and stages, types
of impellers and bowls, sealing systems,
bearing arrangements and the material
selection will meet any requirement within
its working range.
Capacity range: 25...5000 m3/h.
Pump QT...
Horizontal propeller pump
with reversible rotation,
used for trimming of ships,
e.g. multitrack train ferries,
Ro-Ro, cargo and container
vessels.
Capacity range:
200...1800 m3/h.
CN(L), (LB), (HB)
Horizontal & Vertical
end suction & in-line
centrifugal pumps.
Models for close rigid-,
fexible- and spacer
coupling. Used in
marine and industrial
applications: General
Fresh and Sea Water,
Fire Fighting and
District Heating.
Capacity range:
5.1000 m3/h
DHBF/DHBS centrifugal pumps for
marine application.
A new series of pumps has been
developed to serve the maritime
industry. This range covers all duties
on-board sea-going vessels and
marine structures.
Capacity range: 51000 m3/h
Pump CHV...
Horizontal single and
multistage centrifugal
pumps. Can also be
mounted vertically on the
bulk head.
Used as fre, boiler feed
and generally in the
engine room for both
fresh and sea water as
the pumps are in bronze
as well as cast iron.
Capacity range:
1...400 m3/h.
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
Marine & offshore Design
Engineering
Project Management
ISIC A/S
Edwin rahs vej 54
DK-8220 Brabrand
T +45 70 20 70 77
F +45 70 20 79 76
www.isic.dk
contact:

Soeren Kraemmergaard
Director Marketing & Sales
skr@isic.dk

Jens-Jrgen Sumborg
Manager Sales & class certifcation
jjs@isic.dk

Bjrn Ahrensbach
Manager Sales Military & naval
bja@isic.dk

Tommi naukkarinen
Manager Sales
ton@isic.dk

iben Jungersen
Manager customer relations
ibj@isic.dk
ISIC A/S is a leading OEM supplier of marine and
naval PC hardware and marine monitors comply-
ing with IEC 60945, IACS E10, ECDIS, RADAR
and various MILL. graded standards. Holding all
appropriate marine and naval certifcates ISIC A/S
ofers OEM standard products as well as custom
designed products. ISIC A/S is part of Lagercrantz
group listed on the Swedish stock exchange.
Applications
50 | iSic A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
Marine & offshore Design
Engineering
Project Management
KnuD E. HAnSEn A/S | 51
KNUD E. HANSEN A/S is a project-oriented
company. Te organization is dynamic and is con-
stantly under revision in order to serve our clients
On Site on the projects around the world and in
our ofce in Denmark. Our ambition is to be the
best in our market and to be a company that at-
tracts the best of employees due to our business
philosophy and company culture.
Our team has many years of experience in the
business, and we have skilled engineers ready to
give you the service needed.
You can also visit our homepage on the Internet
WWW.KNUDEHANSEN.COM
where a description of our company is available.
KNUD E. HANSEN A/S is a Naval Architect com-
pany specialized in Marine Design & Engineering for
all types of vessels incl. Cruise and Ferry.
Reference for recently executed projects:
STENA BRITANNICA conversion
STENA BALTICA conversion
1800 LM RORO for Seatruck at Huelva
HVAC Design on cruise vessel AIDA SPHINX
at Meyer Werf
HVAC Design on cruise vessel MSC at
Chantier de lAtlantique
Fishery Inspection Vessel for the Danish
Directorate of Fisheries
New ferries for Sundbusserne A/S
New SMYRIL for Strandfaraskip
KNud E. HANSEN A/S
islands Brygge 41-43
DK-2300 copenhagen S
T +45 32 83 13 91
F +45 32 83 13 94
keh@knudehansen.com
www.knudehansen.com
contact:
finn Wollesen Petersen
wollesen@knudehansen.com
cell. +45 40 84 25 75
skype: fWP-KEH
Key values:
innovative
customized
Design
Global
Proven
Experience
P R O d u C T S
Marine & offshore Design
Engineering
Project Management
Naval architects desigNers mariNe eNgiNeers
SINCE 1937
Te ShipPax Award for
Outstanding Ferry Exterior of 2005:
SMYRIL
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
52 | LinDAB vEnTiLATion A/S
lINdAB vENTIlATION A/S
Langkr 20
DK-6100 Haderslev
T +45 73 23 23 23
F +45 73 23 23 24
www.lindab.dk
nc@lindab.dk
contact:
niels christensen
Lindab is an international group which develops,
manufactures and markets sheet metal products
and system solutions in the Ventilation and
Profle business areas.
The Ventilation business area focuses on the
ventilation industry, offering everything from ventilation
components to complete indoor climate solutions.
A special product programme for the marine industry
includes ductwork and diffusers for marine and off-
shore installations and software tools for sketching,
dimensioning and documentation of the complete system.
The Lindab group has approx. 4,900 employees in 29
countries and generated sales of SEK 7,609 M in 2006.
Its head offce is in Grevie near Bstad on the beautiful
Bjre peninsula in southwestern Sweden.
Lindab is represented in more than hundred locations
within Europe and USA.
Product range Marine:
LindabSafe
Complete programme in circular spiral-seamed ducts
and fttings for industrial, comfort and Marine ventilation.
Patented system for factory-assembled sealing strip.
Type-approved. Conforms to leackage Class D.
Lindabisol
Circular spiral-seamed ducts and fttings, double-jacket-
ed and insulated with mineral wool. Conforms to a wide
range of Regulations/Standards.
LindabComfort
Air valves for exhaust and supply. Special diffusers for
marine installations.
Lindab brings
air to sea...
Our experienced staff is
ready to take your call.
Design and function, two
important issues on a
modern ship.
All products are tested in
our laboratories.
P R O d u C T S
- Ductwork for ventilation
systems
- Diffusers for air distribution
- Mounting accessories
- full Scale tests
- Documentation
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Watertight, corrosion-proof design
make pre-insulated pipes the obvious
choice for all vessels, and flexibility
follows in the wake.
LOGSTOR Marine supplies pre-insulated 100%
watertight pipes which withstand all the rigours of
service at sea and require no extra insulation on site.
Te advantages are particularly apparent for
above-deck piping systems since the pipes are
impervious to the impact of human trafc across
them as well as salt water wave impact, wind,
beating rain, heat and cold etc.
Te pipes are ideal for both new vessels and ret-
roftting of older ones and can even be installed
at sea during voyage to minimize valuable down-
time.
We also supply special cryogenic insulation for
use in LNG, LEG and LPG carriers.
Manufacturing takes place in Denmark, China
and Korea.
Product benefts
1. Carrier pipe fully protected against
external corrosion
2. 100% waterproof insulation system
3. Minimal thermal loss
4. Salt, chemical and UV resistant jacket
material
5. Solid construction, high mechanical
strength
6. S ervice temperatures from 200C to
+315C
7. Fast and easy installation
8. Optimum insulation capacity
throughout the service life.
9. Low maintenance cost
10. Long service life
LOGSTOR Marine
lOgSTOR MARINE
Danmarksvej 11
DK-9670 Lgstr
T +45 99 66 10 00
F +45 99 66 15 50
marine@logstor.com
www.logstor.com
P R O d u C T S
Machinery piping
and fttings
LoGSTor MArinE | 53
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
54 | LYnGS MArinE A/S
lYNgS MARINE A/S
Lyngs All 2
DK-2970 Hrsholm
T +45 45 16 62 00
F +45 45 16 62 62
sales@lyngsoe.com
www.lyngsoe.com
contacts:
niels otto Wind-Jensen
Esben Leer Jrgensen

For Peace of Mind
Automation and Navigation Solutions
for any type of ship...
D
ata for S
h
ip
M
an
ag
em
en
t


B
u
n
k
e
r
s
,

b
a
l
l
a
s
t

a
n
d

b
i
l
g
e

c
o
n
t
r
o
l
C
arg
o M
on
itorin
g
&
C
on
trol
Power Management


E
m
e
r
g
e
n
c
y

M
a
n
a
g
e
m
e
n
t


M
a
c
h
in
e
r
y

A
la
r
m

&

M
o
n
it
o
r
in
g

P
r
o
p
u
l
s
i
o
n

C
o
n
t
r
o
l


C
a
m
e
r
a

S
u
r
v
e
i
l
l
a
n
c
e
P R O d u C T S
Alarm monitoring systems,
Remote control systems
and Navigation systems
for cargo and passenger
ships. Newbuildings and
retroft projects
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Switchboards,
Consoles for Bridge
& Engine Rooms
A/S Logstrup-Steel is an international
organisation engaged in the
manufacture of the original modular
switchgear and controlgear systems
supplied in loose parts worldwide.
Since 1958 the company has been a
leading innovative force in this
industry. The system covers the
whole spectrum of low voltage
applications from the main
switchboard down to the smallest
distribution board and process panel.
The switchboard system is type
tested up to 8500A, ICW 130kA 1sec.
IPK 300kA, according to EN 60439-1,
IEC 60439-1, as well as it has been
approved by Det Norske Veritas,
Germanischer Lloyd, Lloyds
Register, Bureau Veritas and The
Russian Maritime Register of
Shipping.
The Logstrup modular system has
due to its superior strength, flexible
bus bar system and high quality been
a strong player in the marine marked
for more than 30 years. The
combination of Fixed, Removable
and Withdrawable Units in the same
modular system makes the product
unique for all marine applications.
Our reference list covers the
complete range of vessels, from the
strongest dredger vessel to the most
high-tech luxury yacht, made in
co-operation with our partners all
over the world.
The latest Logstrup switchgear and
controlgear system is the Omega, a
unique, innovative draw-out solution
which enables reconfigurations and
repairs while the panel is live. This
allows for an absolute minimum of
downtime which ensures maximum
safety.
Please visit www.logstrup.com for
further and detailed information.
A/S Logstrup Steel
T: +45 49 12 75 00
F: +45 49 12 75 01
E: info@logstrup.dk
W: www.logstrup.dk
Lgstrup Sweden AB
T: +46 40 36 32 00
F: +46 40 36 32 21
E: info@logstrup.se
W: www.logstrup.se
Logstrup (Ireland) Ltd.
T: +353 93 70900
F: +353 93 70901
E: info@logstrup.ie
W: www.logstrup.ie
Logstrup (U.K.) Ltd.
T: +44 161 788 9811
F: +44 161 789 0063
E: info@logstrup.co.uk
W: www.logstrup.co.uk
P R O d u C T S
Switchboards
consoles
A/S lgSTRuP-STEEl
Egeskovvej 18
DK-3490 Kvistgrd
T +45 4912 7500
F +45 4912 7555
www.logstrup.com
A/S LGSTruP-STEEL | 55
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
The Danish company MAN Diesel A/S is, together
with its German parent company, MAN Diesel SE,
in Augsburg, one of the companies of the German
industrial giant, the MAN Group. The Danish com-
pany has units in Copenhagen, Frederikshavn
and Holeby.
The staff in Copenhagen develops, designs and
sells two-stroke diesel engines for marine and sta-
tionary application. Sales and production of engine
components and spare parts are also located here.
MAN B&Ws two-stroke engines are global
market leaders.
The two-stroke engines are produced in Frederiks-
havn and by a global network of licensees.
The Frederikshavn works also produces four-stroke
engines for propulsion, Generating Sets for gene-
rating electricity on board ships and for power
plants, as well as gears and propeller equipment.
The sales and service organisation for the Genera-
ting Sets is situated in Holeby.
In Augsburg, MAN Diesel SE develops turbocharg-
ers, medium-speed four-stroke diesel engines with
large and medium bore and builds engines in the
power range from 3,000 to 21,600 kW.
The organisation encompasses a worldwide net-
work of service centres and offces in the worlds
most important shipping hubs.
MAN Diesel is a leading supplier
of large diesel engines
for ship propulsion systems
and stationary power supply
MAN dIESEl A/S
Teglholmsgade 41
DK-2450 copenhagen Sv
Denmark
T +45 33 85 11 00
F +45 33 85 10 30
manbw@dk.manbw.com
www.manbw.com
MAn Diesel A/S
niels Juels vej 15
DK-9900 frederikshavn
T +45 96 20 41 00
F +45 96 20 40 30
alpha@dk.manbw.com
www.manbw.com
MAn Diesel A/S
stervej 2
DK-4960 Holeby
T +45 54 69 31 00
F +45 54 69 30 31
gensetmarine@dk.manbw.com
www.manbw.com
P R O d u C T S
Main and auxiliary
machinery components
Electrical and automation
56 | MAn DiESEL A/S
MAN dIESEl A/S
Teglholmsgade 41
DK-2450 copenhagen Sv
Denmark
T +45 33 85 11 00
F +45 33 85 10 30
manbw@dk.manbw.com
www.manbw.com
MAn Diesel A/S
niels Juels vej 15
DK-9900 frederikshavn
T +45 96 20 41 00
F +45 96 20 40 30
alpha@dk.manbw.com
www.manbw.com
MAn Diesel A/S
stervej 2
DK-4960 Holeby
T +45 54 69 31 00
F +45 54 69 30 31
gensetmarine@dk.manbw.com
www.manbw.com
P R O d u C T S
Main and auxiliary
machinery components
Electrical and automation
MAn DiESEL A/S | 57
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
MARINE AlIgNMENT A/S
farum Gydevej 63
DK-3520 farum
T +45 44 95 13 21
F +45 44 95 17 23
easeacon@easeacon.com
www.easeacon.com
Marine Alignment A/S is a Danish company specializing in software programs to be used primarily
on board ocean going vessels. We have 20 years of experience in developing loading and planning
software and can count close to 1,000 installations today. Our brand Easeacon is approved by
all the major Classifcation Societies and has proven to be a reliable tool for contemporary effcient
ships operation. Our strengths are our high-quality products, fexibility, quick feed-back time and our
great expertise within our line of business. We consider ourselves a reliable and professional supplier
of strength and stability calculations and cargo planning software.
u Damage & Intact Stability
u Full Strength Assessments
u Trim Optimization
u Water Ballast Optimization
u Water Ballast Management Plans
u Tank Level Interface
u Shore Communication Interface
u Comprehensive Cargo Handling
u Dangerous Cargo Checking
u Breakbulk & Container Securing
u Crane Simulation
u Loading & Discharging Reports
u LPG/LNG Gas Reports
u Database Interface
CARGO PLANNING +
LOADING COMPUTER
SYSTEMS
Unique customer support
Flexible to any ship
Cross-platform interaction
An expert business partner
Always on time
A tradition
- based on knowledge...
58 | MArinE ALiGnMEnT A/S
P R O d u C T S
Ship outft and equipment
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
MARINE TECHNIC
Depotvej 3
DK-4700 naestved
T +45 55 70 06 99
F +45 55 70 08 40
sales@marinetechnic.com
www.marinetechnic.com
contacts:
Henrik nielsen
Kuno Madsen
P R O d u C T S
oil filter Systems
Engine part cleaners
cleaning bars
Recycling is good business
Eighty percent of all component failures in hy-
draulic systems can be traced back to contaminat-
ed oil. By implementing a Filmax Filtration system
you will contribute to reduce this amount down
to zero percent. Purchasing a Filmax Unit is not a
cost, but an investment.
While you are reducing your machineries down-
time, reducing purchases of spare parts, system
flters and new oil you will for yourself see how
fast your investment pays of.
Environmental benefts. By reducing oil purchas-
ing, you are also reducing oil waste, which is one
of the worlds largest pollution sources today.
Save man hours and improve
the working environment
Te Engine part cleaner from Marine Technic are
special designed and developed for maritime use.
Tis machine is able to accommodate and clean
the most comment auxiliary engine spare parts,
flters, pump parts, tools, cylinder covers etc.
MArinE TEcHnic | 59
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
MARITEAM
- we break the waves...
MARITEAM
- we break the waves...
Lifesaving
Appliances and
Ships Equipment
MERMAN lifejackets Infatable Lifejackets Lights for Lifejackets
and Lifebuoys Lifebuoys Refective Tapes Lifejacket Boxes and
Deckbenches Deck Furniture Immersion Suits Flotation Suits
Liferafts MES-Systems Lifeboats Freefall Lifeboats Davits
Pyrotechnics Marine Accommodation Systems Fire Doors Pneumatic/
Electric Door Systems Marine Floorings Pilot Ladders Spare parts for
Davits, Liferafts, Lifeboats etc. Service for Liferafts, Lifejackets etc.
www.mariteam.dk
MERMAN 16 A lifejacket
P R O d u C T S
Lifejackets
Lights for Lifejackets and
Lifebuoys
immersion Suits
Pyrotechnics
Pilot Ladders
Service for Liferafts and
Lifejackets etc.
MariTeaM a/S
Marielundvej 17
DK-2730 Herlev
T +45 39 18 66 44
F +45 39 18 07 57
permich@mariteam.dk
www.mariteam.dk
60 | MariTeam A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
500HS gearbox
For commercial ships
Twin in single out
gearbox type 1400/450HS
Compact gearbox
type 200HSC
For fastrunning vessels
Mekanord is an established manufacturer of marine
propulsion and auxiliary gearboxes.
Our propulsion gearboxes program covers power
range from approx 200 kW to approx 4000 kW.
Tey can be delivered with integrated servo sys-
tem for CPP propulsion systems or prepared for
OD-boxes for CPP system with servo cylinder in
propeller hub. With a wide range of standard com-
ponents and know-how from previously deliveries,
our customized gearboxes are available with vari-
ous options of PTOs, PTO/PTI and main clutch.
With our worldwide service and sales network,
Mekanord is the safe choice for your next gearbox.
For further information on our marine transmis-
sions in various designs please contact Mekanord
or your nearest Mekanord agents.
MEKANORd A/S
Sandholm 7
DK-9900 frederikshavn
T +45 96 20 14 00
F +45 96 20 14 14
mekanord@mekanord.dk
www.mekanord.dk
MEKAnorD A/S | 61
P R O d u C T S
c.P. Gearbox
front P.T.o.s
P.T.o. Gearboxes
c.P. Propeller and remote
control System
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
METAlOCK dENMARK A/S
industrivangen 16
DK-2635 ishj
copenhagen
T +45 43 73 66 20
F +45 43 73 66 25
info@metalock.dk
www.metalock.dk
contacts:
Kenneth christensen
Jimmi Esmann
Approved Supplier of
On-Site Machining
24 Hour service world wide of
On-Site Machining to Offshore Industry - Marine
P R O d u C T S
Ship outft and equipment
62 | METALocK DEnMArK A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
norDHAvn A/S | 63
NORdHAvN A/S
fiskerivej 2
P.o.Box 449
DK-8100 Aarhus c
T
+45 70 21 34 00
F
+45 70 21 34 11
nordhavn@nordhavn.dk
www.nordhavn.dk
contacts:
Jan Laustsen
Kent Johnsen
NORDHAVN A/S has more than 50 years of expe-
rience in design and production of marine gener-
ating sets and complete propulsion engines/plants.
Our customers include some of the largest ship-
yards and shipowners in the world, and we supply
to all types and sizes of vessels from fshing boats
to super tankers.
NORDHAVN A/S specialises in solutions for
demanding customers and readily takes on the re-
sponsibility for total solutions. All assignments are
completed in accordance with the high demands
for quality and operational reliability.
Our Products
NORDHAVN A/S manufactures and sells:
Marine Generating Sets (27-500 KW)
Complete Propulsion Plants for light, medium
or heavy duty
Portable Power Packs
Each individual task is tailored according to the
needs and specifcations of our customers.
NORDHAVN supplies everything from single
genset to complete packages, the extent of which
our customers decide themselves.
We work with the best
NORDHAVN A/S has been general agent for
marine engines from SCANIA since 1959 and for
SISU DIESEL (VALMET) since 1970.
Afer sales
NORDHAVN A/S exports worldwide and has
agents in many countries.
As part of our eforts to secure optimum service,
we ensure that our sales and service staf are spe-
cialists.
NORDHAVN
- a partner for demanding customers
P R O d u C T S
Main and auxiliary
machinery components
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
consultants
Ship outft and equipment
Machinery piping
and fttings
Electrical and automation
NOvENCO
industrivej 22
DK-4700 naestved
T +45 70 12 42 22
F +45 55 78 65 50
info@novenco.biz
www.novenco.biz
contact: fire fighting:
Sales Manager
Europe & America
Kim Holm Joergensen
kj@novenco.biz

Sales Manager
far East
Henrik Byskov
hfb@novenco.biz

contact: HvAc:
Sales Manager
Merchant ships
Gyrd Mortensen
gdm@novenco.biz

Sales Manager
Yachts, cruise and ferry
Jytte Sundahl
jts@novenco.biz

Sales Manager
navy ships
Tore Korsmo
tk@novenco.no
NOVENCO
NOVENCO
NOVENCO
Industrivej 22
DK-4700 Naestved
T +45 70 12 42 22
F +45 55 75 65 50
info@novenco.biz
www.novenco.biz
China Ofce:
Fire Fighting:
NOVENCO APAC
Flat J, 23/F Huadu Mansion
838 Zhangyang Road
Shanghai, P.R.C. 200122
China
T +86 21 58 20 74 11
F +86 21 58 20 38 37
Contact Person:
Fire Fighting:
Henrik Byskov
Sales Manager
hfb@novenco.biz
HVAC:
Gyrd Mortensen
Sales Manager
gdm@novenco.biz
P R O D U C T S
Consultants
Ship outft and equipment
Machinery piping
and fttings
Electrical and automation
NOVENCO:
Novenco is one of the worlds leading suppliers of
fre fghting, heating, ventilation, air conditioning
and refrigeration equipment.
Te company was founded in Denmark in 1947
and has become one of the world-leading sup-
pliers. Novenco symbolizes quality and environ-
mentally safe products. Te company is certifed
according to ISO 9001 and ISO 14001.
Te headquarter is located in Naestved, Denmark.
HI-PRES MARINE & OFFSHORE:
Novencos ventilation and air conditioning prod-
ucts are marketed and distributed world-wide
through Hi-Pres Marine & Ofshore. We have
more than 50 years of experience in producing, de-
signing, installing and commission systems for the
marine market.
Hi-Pres Marine & Ofshore provides a wide range
of ventilation and air conditioning systems for mer-
chant vessels, work boats, cruise liners, navy ships,
yachts and ofshore rigs.
FIRE FIGHTING:
With more than 1,000 installed XFlow Water
Mist Systems, XFlow is a familiar name within
fre fghting solutions for the maritime industry.
Te XFlow systems ofer total as well as local pro-
tection for machinery spaces and accommodation
areas. Te Danish developed and manufactured
technology ofers faster and safer fre extinguish-
ing than any other system, and with low installa-
tion and maintenance costs it also ofers a better
economy.
Since the beginning of year 2000 Novencos Fire
Fighting Division has expanded rapidly. Today the
Fire Fighting Division employs 45 people at the
ofces in Denmark and China and has world-wide
representation.
York Fire Fighting |
NOVENCO:
Novenco is one of the worlds leading suppliers of
fre fghting, heating, ventilation, air conditioning
and refrigeration equipment.
Te company was founded in Denmark in 1947
and has become one of the world-leading sup-
pliers. Novenco symbolizes quality and environ-
mentally safe products. Te company is certifed
according to ISO 9001 and ISO 14001.
Te headquarter is located in Naestved, Denmark.
HI-PRES MARINE & OFFSHORE:
Novencos ventilation and air conditioning prod-
ucts are marketed and distributed world-wide
through Hi-Pres Marine & Ofshore. We have
more than 50 years of experience in producing,
designing, installing and commissioning systems
for the marine market.
Hi-Pres Marine & Ofshore provides a wide range
of ventilation and air conditioning systems for
merchant vessels, work boats, cruise liners, navy
ships, yachts and ofshore rigs.
FIRE FIGHTING:
With more than 1,000 installed XFlowWater Mist
Systems, XFlow is a familiar name within fre
fghting solutions for the maritime industry. Te
XFlow systems ofer total as well as local protec-
tion for machinery spaces and accommodation
areas. Te Danish developed and manufactured
technology ofers faster and safer fre extinguish-
ing than any other system, and with low installa-
tion and maintenance costs it also ofers a better
economy.
Since the beginning of year 2000 Novencos Fire
Fighting Division has expanded rapidly. Today the
Fire Fighting Division employs 45 people at the
of ces in Denmark and China and has world-wide
representation.
64 | novEnco
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
orSKov YArD A/S | 65
The Best Repair Center in Northern Europe
www.scanel.dk www.orskov.dk
SHIP REPAIR
AND -CONVERSIONS
4 docks up to 215 x 34 m.
Cranes up to 100 tonnes
Ro-Ro pier with crane for
mobilisation of all vessel types
No requirement for use of
either tug or pilot
Top quality, competitive prices
and delivery on time
www.vms.dk
Frederikshavn - An Easy Solution
for Superintendents
NEWBUILDING
AND REPAIR
Electrical Installation
Design and Engineering
Interior Lighting
Electromechanical Services
Navigation og communication
Ventilation
Sprinkler og Sanitary Installation
Spare parts
Supervisor/man-power
VDR and ECDIS installation
ENGINE AND
PROPELLER REPAIR
Diesel engines overhaul/repair
2 and 4 stroke
Propeller repair, straightening
and balancing
Spare parts
new and reconditioned
Special welding,
arc/thermal spraying
Laser alignment: Coupling,
shaft and line bore
Turbocharger service
Worldwide service
Frederikshavn - An Easy Solution
for Superintendents
ORSKOv YARd A/S
Havnepladsen 12
DK-9900 frederikshavn
T +45 96 20 85 00
F +45 96 20 85 85
orskov@orskov.dk
www.orskov.dk
P R O d u C T S
Shiprepair
conversions
The Best Repair Center in Northern Europe
www.scanel.dk www.orskov.dk
SHIP REPAIR
AND -CONVERSIONS
4 docks up to 215 x 34 m.
Cranes up to 100 tonnes
Ro-Ro pier with crane for
mobilisation of all vessel types
No requirement for use of
either tug or pilot
Top quality, competitive prices
and delivery on time
www.vms.dk
Frederikshavn - An Easy Solution
for Superintendents
NEWBUILDING
AND REPAIR
Electrical Installation
Design and Engineering
Interior Lighting
Electromechanical Services
Navigation og communication
Ventilation
Sprinkler og Sanitary Installation
Spare parts
Supervisor/man-power
VDR and ECDIS installation
ENGINE AND
PROPELLER REPAIR
Diesel engines overhaul/repair
2 and 4 stroke
Propeller repair, straightening
and balancing
Spare parts
new and reconditioned
Special welding,
arc/thermal spraying
Laser alignment: Coupling,
shaft and line bore
Turbocharger service
Worldwide service
Frederikshavn - An Easy Solution
for Superintendents
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Te company of Consulting Naval Architects Ole
Steen Knudsen A/S, which was founded in 1966,
provides consultancy assistance within the follow-
ing wide range of maritime related areas:
- Ship design & construction
- Repair and conversion
- Intact and damage stability calculations
- Advanced FEM calculations
- Inspection services
- Plan approval
- Marine survey and expert witness
- Procurement assistance and technical services
OSK-ShipTech A/S aims to provide clients with
confdential, personalised assistance and this is
achieved by means of a close dialogue with the
client in order to identify his needs and provide
optimal, tailor-made solutions.
OSK-ShipTech A/S has the professional approach
needed for solving both time-critical and compli-
cated technical problems, and has carried out de-
manding tasks for such challenging clients as the
American company, Clipper Cruise Line, Moby
of Italy and well as the Danish companies A.P
Moller and DFDS.
Our products cover the full range of vessels and
include some outstanding Mega Yachts, Ro-Pax
ferries and Cruise Vessels. We have also the privi-
lege of assisting customers with more cargo-ori-
entated vessels.
OSK-ShipTech A/S has extensive experience in
designing vessels for Arctic areas and our knowl-
edge is updated regularly through our assign-
ments as technical manager for vessels operating
in severe arctic conditions.
OSK-SHIPTECH A/S
OSK-SHIPTECH A/S
rolighedsvej 30-32
DK-8240 risskov
T +45 86 17 80 99
F +45 86 17 52 88
contact:
Anders Hansen, Managing Director
naval@osk.dk

Branch offce:
482/62c3
Le quang Dinh Street
Binh Thanh District
Ho chi Minh city
vietnam

contact: Gunnar Lage,
naval Architect
F + 0084 829 42950
M + 0084 (0) 918770412
gunnar@gunnar-vn.com
www.osk.dk
P R O d u C T S
Ship design & construction
repair and conversion
Advanced stability calculations
Advanced fEM calculations
inspection services
Plan approval
66 | oSK-SHiPTEcH A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
oxYMAT A/S | 67
Fasanvej 18-20 DK-3200 Helsinge Tel. +45 48 79 78 11 Fax +45 48 79 78 13 www.oxymat.dk
Oxymat is one of the world leaders in the
field of onsite nitrogen generation systems.
These non-cryo units are extremely cost
effective and have fast payback periods.
Our PSA generators are operating in extreme
conditions, it being in zone 1 offshore, on
Gas tankers, at field hospitals in Afghanistan
or supplying fish farms in Chile.
PSA-PLANTS vs MEMBRANES
PSA-plants are consuming the same amount
of compressed air at 5-7 % Oxygen content,
but at 0,1 % Oxygen, the PSA plants produc-
es 6 times more Nitrogen pr m
3
feed air.
NEW INSTALLATIONS
Very compact solution without large buffer
tanks.The plant is delivered on skids for easy
assembly.The plant is tested and Class appro-
ved at the factory prior to transportation.
Onsite commissioning by our service dept.
SERVICE
Oxymat has its own service department with
highly educated marine specialists.
We can travel with short notice WW.
ONSITE NITROGEN GENERATION SYSTEMS.
m
3
/hr
O
x
y
g
e
n

c
o
n
t
e
n
t
membranes
PSA
RETROFITTING
The plants are delivered in smaller
parts or on skids.When the parts
have been pre-welded, the piping
is installed enroute to next port.
Normally, the vessel will be idle
for maximum 12-18 hrs.
HAZARDOUS AREAS
The plants can be designed to run in Ex-areas
OxYMAT A/S
fasanvej 18-20
DK-3200 Helsinge
T +45 48 79 78 11
F +45 48 79 78 13

sales@oxymat.dk
www.oxymat.dk

contact:
Marine:
Thomas Billeschou-Hansen

industry:
Pernille Heimann
P R O d u C T S
onsite nitrogen
generation systems.
PSA-plants.
P R O d u C T S
Ship design & construction
repair and conversion
Advanced stability calculations
Advanced fEM calculations
inspection services
Plan approval
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
PRES-vAC ENgINEERINg APS
Svanevang 3-5
DK-3450 Allerd
T +45 48 17 40 55
F +45 48 17 17 88
presvac@pres-vac.com
www.pres-vac.com

P R O d u C T S
Ship outft and equipment
Machinery piping
and fttings
cargo handling outft
and equipment
68 | PrES-vAc EnGinEErinG APS
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
ROCKWOOl MARINE & OFFSHORE
Hovedgaden 501
DK-2640 Hedehusene
T + 45 46 56 16 16
F + 45 46 56 16 04
export@rockwool.dk
www.rockwool-marine.com
Local info:
Hong Kong offce
Suite 805, Asia orient Tower
Town Place
33 Lockhart road, Wanchai
Hong Kong
T + 852 2866 6180
F + 852 2866 9555
Hong Kong offce contacts:
Leif Holm nielsen
Business Executive far East
Tony Leung
Sales Manager
P R O d u C T S
Ship outft and equipment
ROCKWOOL Marine & Ofshore manufactures
a wide range of products for all kinds of insula-
tion purposes, e.g. insulation for the marine and
ofshore sector. On account of the unique proper-
ties of the ROCKWOOL insulation and specially
developed products, ROCKWOOL insulation can
be used everywhere. Tis applies e.g. to:
H and A constructions
Deck and bulkhead constructions
Engine rooms
Pipe and air ducts
Doors and panels
Floating foors
Sub sea pipe lines
Fire properties
Te ROCKWOOL products are based on stone
wool, which cannot burn and which will withstand
temperatures up to 1000 degrees C without melting.
Tus ROCKWOOL stone wool provides the best
guarantee for an efective fre protection on board
ships and ofshore platforms.
Approvals
All ROCKWOOL Marine & Ofshore products
and constructions have been tested according to
the latest IMO regulations, just as ROCKWOOL
Marine & Ofshore is certifed according to the lat-
est MED directive. As Notifed Body ROCKWOOL
Marine & Ofshore has chosen Det Norske Veritas,
which consequently guarantees our quality.
ROCKWOOL insulation worldwide
ROCKWOOL Marine & Ofshore is part of the
ROCKWOOL group, which is the worlds largest
manufacturer of stone wool with over 20 factories
and representation in numerous countries all over
the world. Tis means that ROCKWOOL can of-
fer a solution worldwide.
www.rockwool-marine.com
ROCKWOOL Marine & Ofshore web site has
now existed for several years and is every day used
by many people all over the world. Our web site is
regularly updated so that you will always here fnd
the latest information about products, construc-
tions and approvals.
ROCKWOOL fre safe insulation
for the marine and ofshore sector
rocKWooL MArinE & offSHorE | 69
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
RO-CLEAN DESMI A/S has responded to this
risk and has been developing equipment with
great success over the last 25 years to help me-
chanically recover oil from the sea, rivers and
lakes. Our equipment has been used in many ma-
jor oil spill response operations around the world.
We produce an extensive range of oil skimmers
including disc, mop, weir, belt, brush and vacuum
systems. Each of these skimmer types is available
in a number of sizes. Tis enables us to provide
the ideal skimmer for any application.
In addition our highly experienced engineering
staf are able to custom design and fabricate sys-
tems for most applications including ship, boom
and skimmer installations. Tis vast experience
combined with top quality manufacturing facili-
ties has resulted in some of the most well-known
and proven oil spill control devices in the world
today!
Products:
RO-BOOM
Troilboom
Weir Skimmers
Disc, Brush, Belt Skimmer
Power Pack
Vacuum Units
Absorbents
Consultancy & Training
Looking afer our waters marine and
industrial oil spill products and services
by RO-CLEAN DESMI
P R O d u C T S
ro-BooM
Troilboom
Weir Skimmers
Disc, Brush, Belt Skimmer
Power Pack
vacuum units
Absorbents
consultancy & Training
RO-ClEAN dESMI A/S
Hestehaven 21B
DK-5260 odense S
T +45 65 91 02 01
F +45 65 90 88 77
www.ro-cleandesmi.com
contact:
Henrik Jensen
hj.ro-clean@desmi.com
70 | ro-cLEAn DESMi A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SAINT-GOBAIN MARINE APPLICATIONS | 7
Saint-Gobain
Marine Applications
Jlicher Strae 495
D-52070 Aachen
T +45 62 24 48 48
M +45 21 45 45 48
F +49 241 516 901 281
marine@saint-gobain.com
www.saint-gobain-marine.com
Contacts:
Hans Juul Jacobsen
Head of Marine Business
P R O D U C T S
Ship outfit and equipment,
e.g. glazing, insulation
and climate control
Five specialists, one all-round
advisor
Five renowned specialists have
combined their experience,
knowledge and expertise to
form the Saint-Gobain Marine
Applications and Halton partner-
ship. Five companies active in
glazing, insulating glass, re
resistant glass, heatable glass,
high security glass, glass
specialities, high performance
mineral wool insulation and
climate control. Five specialized
companies, one all-round advisor.
The bright new vision, the bright
new efciency.
FULL INTEGRATION OF GLAZING (HIGH SECURITY, INSULATION, FIRE PROTECTION,
SPECIALITIES), HIGH PERFORMANCE MINERAL WOOL INSULATION AND CLIMATE CONTROL
THE
BRIGHT
NEW
VISION
Adv Marine tbv Danish Marine Gro1 1 19-12-2006 16:20:18
SAinT-GoBAin MArinE APPLicATionS | 71
SAINT-GOBAIN MARINE APPLICATIONS | 7
Saint-Gobain
Marine Applications
Jlicher Strae 495
D-52070 Aachen
T +45 62 24 48 48
M +45 21 45 45 48
F +49 241 516 901 281
marine@saint-gobain.com
www.saint-gobain-marine.com
Contacts:
Hans Juul Jacobsen
Head of Marine Business
P R O D U C T S
Ship outfit and equipment,
e.g. glazing, insulation
and climate control
Five specialists, one all-round
advisor
Five renowned specialists have
combined their experience,
knowledge and expertise to
form the Saint-Gobain Marine
Applications and Halton partner-
ship. Five companies active in
glazing, insulating glass, re
resistant glass, heatable glass,
high security glass, glass
specialities, high performance
mineral wool insulation and
climate control. Five specialized
companies, one all-round advisor.
The bright new vision, the bright
new efciency.
FULL INTEGRATION OF GLAZING (HIGH SECURITY, INSULATION, FIRE PROTECTION,
SPECIALITIES), HIGH PERFORMANCE MINERAL WOOL INSULATION AND CLIMATE CONTROL
THE
BRIGHT
NEW
VISION
Adv Marine tbv Danish Marine Gro1 1 19-12-2006 16:20:18
SAINT-gOBAIN
MARINE APPlICATIONS
rosevej 15
DK-5762 v. Skerninge
marine@saint-gobain.com
www.saint-gobain-marine.com
contact:
Hans Juul Jacobsen
Head of Marine Business
T +45 62 24 48 48
M +45 21 45 45 48
F +49 241 516 901 281
P R O d u C T S
Ship outft and equipment,
e.g glazing, insulation
and climate control
SAINT-GOBAIN MARINE APPLICATIONS | 7
Saint-Gobain
Marine Applications
Jlicher Strae 495
D-52070 Aachen
T +45 62 24 48 48
M +45 21 45 45 48
F +49 241 516 901 281
marine@saint-gobain.com
www.saint-gobain-marine.com
Contacts:
Hans Juul Jacobsen
Head of Marine Business
P R O D U C T S
Ship outfit and equipment,
e.g. glazing, insulation
and climate control
Five specialists, one all-round
advisor
Five renowned specialists have
combined their experience,
knowledge and expertise to
form the Saint-Gobain Marine
Applications and Halton partner-
ship. Five companies active in
glazing, insulating glass, re
resistant glass, heatable glass,
high security glass, glass
specialities, high performance
mineral wool insulation and
climate control. Five specialized
companies, one all-round advisor.
The bright new vision, the bright
new efciency.
FULL INTEGRATION OF GLAZING (HIGH SECURITY, INSULATION, FIRE PROTECTION,
SPECIALITIES), HIGH PERFORMANCE MINERAL WOOL INSULATION AND CLIMATE CONTROL
THE
BRIGHT
NEW
VISION
Adv Marine tbv Danish Marine Gro1 1 19-12-2006 16:20:18
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SBS
SCANdINAvIAN
BOIlER SERvICE A/S
industrivej 12
DK-9490 Pandrup
T +45 70 27 10 00
F +45 70 27 10 01
sbs@sbs-eu.com
www.sbs-international.com
contact:
Allan Bech
Zitta Srensen
ulrich Schulz
David May

Local info:
Scandinavian Boiler Service A/S
is the European Head offce of
the SBS Group with sister
companies in America and Asia.
P R O d u C T S
Boiler repair
Burner Service
inspections
Spare Parts
inert Gas Analyzer
nox Monitor
Smoke Density Monitor
72 | ScAnDinAviAn BoiLEr SErvicE A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SCANEl INTERNATIONAl A/S
Havnepladsen 12, Bygn. 10
DK-9900 frederikshavn
+45 96 22 32 42
+45 96 22 32 50
www.scanel.dk
info@scanel.dk
contacts:
Area Sales Manager:
ivan nrgrd
in@scanel.dk
Head of Division, interior
claus nielsen
cn@scanel.dk
Manager sprinkler, HvAc
and Sanitary installation
claus Boddum
crb@scanel.dk
T
F
P R O d u C T S
Transas EcDiS
rutter vDr
Sat. communication
The Best Repair Center in Northern Europe
www.scanel.dk www.orskov.dk
SHIP REPAIR
AND -CONVERSIONS
4 docks up to 215 x 34 m.
Cranes up to 100 tonnes
Ro-Ro pier with crane for
mobilisation of all vessel types
No requirement for use of
either tug or pilot
Top quality, competitive prices
and delivery on time
www.vms.dk
Frederikshavn - An Easy Solution
for Superintendents
NEWBUILDING
AND REPAIR
Electrical Installation
Design and Engineering
Interior Lighting
Electromechanical Services
Navigation og communication
Ventilation
Sprinkler og Sanitary Installation
Spare parts
Supervisor/man-power
VDR and ECDIS installation
ENGINE AND
PROPELLER REPAIR
Diesel engines overhaul/repair
2 and 4 stroke
Propeller repair, straightening
and balancing
Spare parts
new and reconditioned
Special welding,
arc/thermal spraying
Laser alignment: Coupling,
shaft and line bore
Turbocharger service
Worldwide service
Frederikshavn - An Easy Solution
for Superintendents
ScAnEL inTErnATionAL A/S | 73
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
SCAN-STEERINg
Mamrelund 6
DK-6960 Hvide Sande
T +45 97 31 15 22
F +45 97 31 12 47
info@scan-steering.com
www.scan-steering.dk
P R O d u C T S
Steering gear systems
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
Products:
Scan-Steering is manufacturer of several kinds of
complete steering gear systems and we can make
with one, two or three rudders, electronic or
mechanical synchronised and with all electronic
equipment which is necessary for a complete
steering system and it can be mounted on all kind
of vessels in the world.
Information:
1. Te company was founded in 1960 so we have a
lot of experience.
2. Scan-Steering is capable to deliver steering
gears with cap. up to 750 KNm.
3. All steering gears are made according to any
classifcation authoritys requirements.
4. With our steering gear system you will always re-
ceive a total system created afer your demands.

With only one supplier it will beneft you in
several ways:
total comp ability
easy installation
easy maintenance
easy service
quick support
tested/approved systems
P R O D U C T S
SCAn-STEErInG | 57
Scan-Steering
Mamrelund 6
DK-6960 Hvide Sande
+45 97 31 15 22
+45 97 31 12 47
info@scan-steering.com
www.scan-steering.dk
T
F
Scan-Steering
WorldWide
P R O D U C T S
Steering gear systems
Scan-Steering
WorldWide
74 | ScAn-STEErinG
Scan-Steering
WorldWide
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
Generator Protection and
control.
Arc Detecting relays.
Engine Start and Management.
Power Management.
Alarm Annunciators and
indicators.
SElCO A/S
Betonvej 10
DK-4000 roskilde
T +45 70 26 11 22
F +45 70 26 25 22
selco.dk@selco.com
www.selco.com
SELco A/S | 75
Scan-Steering
WorldWide
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
76 | SEnMATic A/S
SENMATIC A/S
industrivej 8
DK-5471 Snders
T +45 64 89 22 11
F +45 64 89 33 11
dk@senmatic.com
www.senmatic.com

contact:
Gunner Srensen
T +45 63 89 22 22
gus@senmatic.com
P R O d u C T S
resistance thermometers
Thermocouples
Thermistors
Mineral-insulated sensors
Transmitters
Multi-spot sensors
Humidity sensors
Sensors for detection and
recording of co
2
/o
2

Thermowells
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SHiPSErv | 77
SHIPSERv
Hauser Plads 32, 3.
DK-1127 copenhagen K
T +45 33 32 31 20
F +45 33 41 10 99
info@shipserv.com
www.shipserv.com

contact:
freddy ingemann
vice President Sales
T: +45 33 32 31 20
fngemann@shipserv.com

other offces:

ShipServ
Head offce
international House
26 creechurch Lane
London Ec3A 5BA
united Kingdom

ShipServ
21f, fairmont House
8 cotton Tree Drive
Hong Kong

ShipServ
1090 King Georges Post road
Suite 802
Edison, nJ 08837
P R O d u C T S
ShipServ Pages
- the online sourcing tool
for the maritime industry
ShipServ Tradenet
- the worlds largest
e-marketplace for ship
supplies trading
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
78 | SiKA DAnMArK A/S
SIKA dANMARK A/S
Praestemosevej 2-4
DK-3480 fredensborg
T +45 48 18 85 85
F +45 48 18 84 96
sika@dk.sika.com
www.sika.dk
contacts:
Per Eskildsen
eskildsen.per@dk.sika.com
finn ipsen
ipsen.fnn@dk.sika.com
carsten Brutus Jrgensen
brutus.carsten@dk.sika.com
P R O d u C T S
- customized high perform-
ance acoustic fooring
solutions
- Sound reducing systems
- visco-elastic vibration
dampening systems
- A-60 fre rated systems
- Thermal insulation systems
- Levelling compounds
- Epoxy foors
- Sealants and adhesives
- Direct glazing
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
STEncA TrADinG A/S | 79
STENCA TRAdINg A/S
vrtfvej 9
DK-9000 AALBorG
T +45 96 32 48 12
T +45 96 32 48 11

www.stenca.dk

contacts:
Sten nielsen
sn@stenca.dk
Thger Jokumsen
ctj@stenca.dk
P R O d u C T S
Apterings dre -
Accommodations door
(Alvedoor).
Prefab. rrisolering -
Perfab. Pipe insulation.
Apteringspaneler -
Accomodationpanels
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SuNTExT APS
roskildevej 53
DK-3600 frederikssund
T +45 47 31 55 35
F +45 47 38 37 97
sg@suntext-graphic.com
www.suntext-graphic.com
contact:
Arvid Malmgren
Export manager
P R O d u C T S
Directional Signage
facility Signage
commercial Signage
Safety Signage
Suntext
points the way
Turnkey Solutions
from a Single Source
Safety and Decorative Signage
- for more than 25 years
Suntext produces Commercial Signage
ranging from standard Signs to individual Signs
according to Architects design.
After installation, Suntext provides Sign Manual
with plans and prints of the actual Signs used,
thus making it easy to maintain the Signage on board.
80 | SunTExT APS
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SvEnDBorG BrAKES A/S | 81
P R O d u C T S
Performance benefts from
using our products include:
- Safety
- Precision
- control
- Effciency
- Durability
- reliability
SvENdBORg BRAKES A/S
Jernbanevej 9
DK-5882 vejstrup
T +45 63 25 52 55
F +45 62 28 10 58
sb@svendborg-brakes.dk
www.svendborg-brakes.com
Contacts:
nikolai Jrgensen
nij@svendborg-brakes.dk
Svendborg Brakes - Hydraulic Braking Systems
Svendborg Brakes is one of the leading and most innovative manufacturers of hydraulic braking systems for
heavy industry in the world. We employ technological expertise, market intelligence and highly competent
personnel to meet customer requirements for reliable, cost-efective and intelligent braking systems.
Furthermore, our braking solutions are customised to precisely match the customers requirements and ap-
plications and we can provide complete brake solutions for new applications - and retroftting. Solutions which
combine hydraulics, electronics and highly advanced brake engineering must operate if other parts fail - when
lives are at stake.
Marine applications for Svendborg Brakes include:
Propulsion systems
Winches
Drawworks
Maritime winches
Ship loaders & unloaders
BRAKING UNDER CONTROL
Svendborg Brakes brake systems meet the demand for maintenance free and completely reliable systems, due
to the ofen remote locations and harsh weather conditions we work in.
We want to be the preferred supplier of braking systems - providing a complete solution. We intend to identify,
develop, and serve new markets with new applications. Our policy of building expert design teams and estab-
lishing a presence on our key markets is designed to ofer our customers full support whenever needed.
With production facilities in Denmark and Germany, we are totally fexible and always able to deliver.
Key benefts for our brakes are:
- Few moving parts - easy maintenance - reduced maintenance costs
- Small air-gap and few moving parts - short response time - fast braking
- Two diferent types of spring packages available - reducing loss of force - higher safety
- Drain ports for hydraulic oil leakage - prevents oil on brake disc - higher safety
FOCUS ON CONSTANT TESTING
Safety is the key to success in our industry, and Svendborg Brakes has worked for many years to test and docu-
ment the performance of our products to provide a level of safety our customers can depend on.
We have the facilities for dynamic testing in Denmark and static testing in Germany, and run a program of
continuous testing on our products at both sites under conditions that are as realistic as possible.
Our test centre in Denmark is one of the biggest in Europe, and can apply extreme loads to thoroughly test
our brakes. Everything is carefully monitored and documented by our engineers, which means that Svendborg
Brakes can prove how our brakes will perform under conditions similar to those they will operate in.
P R O d u C T S
Directional Signage
facility Signage
commercial Signage
Safety Signage
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
SFART
Seapress ApS

Box 288
DK-8100 Aarhus c

T +45 86 25 89 00
F +45 86 25 89 99

red@soefart.dk
www.soefart.dk

contacts:
Editor-in-chief:
Mr. Erik Brandt-Jensen
erik@soefart.dk
Sales Manager:
Mr. Kim E. Thgersen
kim@soefart.dk
For more lhon 5O yeors lhe weekly
Donish shipping publicolion, Soforl,
hos been o solid ond repuled source
of informolion ond is lherefore lhe
perfecl medio lo gel in louch wilh lhe
enlire Donish morilime induslry.
0ver lhe yeors Soforl hos grown ond
developed olong wilh lhe Donish mori-
lime induslry, which hos o very slrong
posilion inlernolionolly ond ploys o
signifconl role for lhe Donish nolionol
economy.
Yeor 2OO5 we corried oul o compre-
hensive survey, which showed lhol our
reoders - bolh lrode professionols ond
privole - ore very solisfed wilh Soforl.
0enerolly, lhey ore exlremely lhorough
spending o lol of lime reoding lhe
orlicles ond lhe reoders olso cleorly
indicoled lhol lhey inlend lo be reod-
ing Soforl o yeor from now.
You ore olso welcome lil click on
www.soeforl.dk - Here you will fnd
more informolion oboul Soforl - ond
you will fnd our F-poper lin DonishI
version of Soforl.
f you hove ony queslions or wish lo
discuss how we con besl ossisl you
reoching lhe enlire Donish morilime
induslry, pleose do nol hesilole lo
conlocl us.
www.soeforl.dk
#ALL3ALES-ANAGER
Mr. Kim F. Thogersen, 0ffce no.. - /5 8 25 8 OO
Direcl line. -/5 8 2O 58 or moil lo. kimOsoeforl.dk
4!2'%44(%$!.)3(
-%2#(!.4.!69
For more lhon 5O yeors lhe weekly
Donish shipping publicolion, Soforl,
hos been o solid ond repuled source
of informolion ond is lherefore lhe
perfecl medio lo gel in louch wilh lhe
enlire Donish morilime induslry.
0ver lhe yeors Soforl hos grown ond
developed olong wilh lhe Donish mori-
lime induslry, which hos o very slrong
posilion inlernolionolly ond ploys o
signifconl role for lhe Donish nolionol
economy.
Yeor 2OO5 we corried oul o compre-
hensive survey, which showed lhol our
reoders - bolh lrode professionols ond
privole - ore very solisfed wilh Soforl.
0enerolly, lhey ore exlremely lhorough
spending o lol of lime reoding lhe
orlicles ond lhe reoders olso cleorly
indicoled lhol lhey inlend lo be reod-
ing Soforl o yeor from now.
You ore olso welcome lil click on
www.soeforl.dk - Here you will fnd
more informolion oboul Soforl - ond
you will fnd our F-poper lin DonishI
version of Soforl.
f you hove ony queslions or wish lo
discuss how we con besl ossisl you
reoching lhe enlire Donish morilime
induslry, pleose do nol hesilole lo
conlocl us.
www.soeforl.dk
#ALL3ALES-ANAGER
Mr. Kim F. Thogersen, 0ffce no.. - /5 8 25 8? OO
Direcl line. -/5 8 2O 58 ?? or moil lo. kimOsoeforl.dk
4!2'%44(%$!.)3(
-%2#(!.4.!69
P R O d u C T S
Danish shipping
publication
82 | SfArT
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
TDc, LYnGBY rADio | 83
TDC Lyngby Radio
- Satellite & Coast Radio Service
TDC, Satellite & Coast Radio Service has joined forces at Lyngby Radio, and ofer
maritime wireless communication to meet any requirements.
We ofer a wide product range, consisting of
Inmarsat, mobile satellite communication
VSAT, permanent broadband connections
Iridium, global telephony via satellite
Coast Radio Service, radio communication at competitive prices
We also ofer a variety of value added services
Safety and Communiation - an efcient maritime solution
P R O d u C T S
vSAT
inmarsat
iridium
coast radio Service
TdC, lYNgBY RAdIO
Bagsvrd Mllevej 3
DK-2800 Kgs. Lyngby
T +45 666 34800
F +45 44 49 53 35
lyngbyradio@tdc.dk
www.tdc.dk/lyngbyradio
contacts:
Henrik nykvist Svendsen
Knut Skjrven
P R O d u C T S
Danish shipping
publication
Instrumentation
One for all
P R O d u C T S
Exhaust gas thermometers
Mechatronic exhaust gas
thermometers
Pressure gauges
Pressure transmitters
Pressure switches
Temperature sensors: Thermo-
couples and PT100 sensors
Bimetal thermometers
inDuPEc sensors
capacitate level sensors
Tempress A/S is Scandinavias leading producer of
mechanical and electronic instruments for meas-
uring pressure, temperature and level. Relying on
50 years of experience Tempress has gathered a
unique know-how within the marine industry.
To fnd the best solution Tempress customizes and
ofers great fexibility to its customers. In close
cooperation with leading engine builders and ship
owners we have achieved a large base of applica-
tion know-how and therefore are capable of ofer-
ing a comprehensive instrumentation solution.
Specifcally, we have developed the following in-
struments to the marine industry:
Exhaust gas thermometers
Mechatronic exhaust gas thermometers
Pressure gauges
Pressure transmitters
Pressure switches
Temperature sensors: Termocouples and
PT100 sensors
Bimetal thermometers
INDUPEC sensors
Capacitate level sensors
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
TEMPRESS A/S
nordlandsvej 64-66
DK-8240 risskov
T +45 89 32 52 10
F +45 89 32 52 13
sales@tempress.dk
www.tempress.dk
Key contacts:
Bjrn Sahl
Managing Director
bs@tempress.dk
Lars Brath
r&D Manager
lb@tempress.dk
84 | TEMPrESS A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
THErKiLDSEn MArinE APS | 85
THERKIldSEN MARINE APS
5A Bjergvangen
DK-3060 Espergaerde
T +45 70 20 43 75
F +45 70 20 44 30
info@therkildsenmarine.com
www.therkildsenmarine.com
Terkildsen Marine was established in 1988, and
has since been operating in the marine industry
and doing purchasing management for a number
of shipowners worldwide. Further we are having
clients in the of-shore industry, shipyards and in
the Danish and Scandinavian fshing feet.
Besides we are general agents in Denmark to the
following companies:
GUASCOR SA. SPAIN (marine - gas engines,
gearboxes)
DUAP SA. SWITZERLAND (fuel injection
systems)
MARINE PARTS Int. ITALY (Separators and
spare parts for same)
Terkildsen Marine is an independent company,
having own storage facilities and we are used to
collect spares from suppliers and arrange packing,
handling and documentation and worldwide for-
warding to our clients of shipowners by air - and
seafreight, courier service or by special trucking..
We are at your disposal for any further informa-
tion or references about our company you might
need, and look forward hearing from you.
ANY QUESTIONS? ANSWERS ARE FREE,
GIVE US A CALL OR E-MAIL US TODAY
P R O d u C T S
- Marine- and gas engines
- Marine gearboxes
- fuel injection systems
- Separators and spare parts
for same
THERKILDSEN
M A R I N E
M
T
THERKILDSEN
M A R I N E M
T
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
uNI-SAFE ElECTRONICS A/S
Amager Strandvej 124
DK-2300 copenhagen S
T +45 32 86 05 25
F +45 32 58 13 30
info@unielec.dk
www.unielec.dk
contacts:
name: Torben f. Thorsen
Mail: tft@unisafe.dk
P R O d u C T S
Salinometers
Bridge Watch Alarm BW-700
communication equipment
Headsets
custom-made solutions
UNI-SAFE ELECTRONICS A/S IS A LEADING SUPPLIER OF MARINE SAFETY EQUIPMENT AND ELECTRONICS
EXPORTING TO MORE THAN 35 COUNTRIES WORLDWIDE. WE MARKET A WIDE RANGE OF HIGH-QUALITY
PRODUCTS AND WE OFFER PACKAGE- OR CUSTOM-MADE SOLUTIONS ADAPTED TO THE NEEDS AND
REQUIREMENTS OF THE INDIVIDUAL CUSTOMER.
High service level and prompt delivery
Even high-quality products require service and spare parts. Recognising the importance of high operational reli ability,
Uni-Safe Electronics assigns a high priority to good service. Being a very exible organisation, we act promptly and
deliver at short notice when required. We stock most spare parts, and often we can even supply spare parts to equip-
ment delivered many years ago.
The only thing constant is change
To ensure that we are continuously on the leading edge of development, Uni-Safe Electronics closely observe all new
trends in the maritime world. Our products and organisation are undergoing constant development.
FRESH
WATER
SALINOMETERS
Freshwater Salinometers
Our salinometers are used by the
worlds leading manufacturers of
fresh-water generators. Measuring
the salinity of distilled sea water;
the device is capable of measuring
the range of salinity as low as 5-10
ppm on one or more measuring
points. Our salinometers SL6000
and SL6005 are DNV approved, and
we guarantee high operational reli-
ability.
Removable electrode unit (New)
The electrode unit has been con-
structed so that by means of a gate-
valve, the electrode can be removed
for inspection and cleaning purpos-
es without closing for the water. In
addition, the new electrode makes
it possible to increase the length
of the cable between the electrode
and the salinometer with up to 100
meters.
Bridge watch
greater safety at sea
BW-700 is a new bridge watch alarm
system complying with all interna-
tional IMO requirements. The three-
step alarm features motion sensors,
which will trigger the alarm, if the
sensor does not detect any motion
on the bridge within 3-15 minutes.
The alarm can also be connected to
the ships general alarm system or
to alarm units in the crew area.
070117_ann_140x240.indd 1 17/01/07 13:42:50
86 | uni-SAfE ELEcTronicS A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
vESTErGAArD MArinE SErvicE A/S | 87
The Best Repair Center in Northern Europe
www.scanel.dk www.orskov.dk
SHIP REPAIR
AND -CONVERSIONS
4 docks up to 215 x 34 m.
Cranes up to 100 tonnes
Ro-Ro pier with crane for
mobilisation of all vessel types
No requirement for use of
either tug or pilot
Top quality, competitive prices
and delivery on time
www.vms.dk
Frederikshavn - An Easy Solution
for Superintendents
NEWBUILDING
AND REPAIR
Electrical Installation
Design and Engineering
Interior Lighting
Electromechanical Services
Navigation og communication
Ventilation
Sprinkler og Sanitary Installation
Spare parts
Supervisor/man-power
VDR and ECDIS installation
ENGINE AND
PROPELLER REPAIR
Diesel engines overhaul/repair
2 and 4 stroke
Propeller repair, straightening
and balancing
Spare parts
new and reconditioned
Special welding,
arc/thermal spraying
Laser alignment: Coupling,
shaft and line bore
Turbocharger service
Worldwide service
Frederikshavn - An Easy Solution
for Superintendents
The Best Repair Center in Northern Europe
www.scanel.dk www.orskov.dk
SHIP REPAIR
AND -CONVERSIONS
4 docks up to 215 x 34 m.
Cranes up to 100 tonnes
Ro-Ro pier with crane for
mobilisation of all vessel types
No requirement for use of
either tug or pilot
Top quality, competitive prices
and delivery on time
www.vms.dk
Frederikshavn - An Easy Solution
for Superintendents
NEWBUILDING
AND REPAIR
Electrical Installation
Design and Engineering
Interior Lighting
Electromechanical Services
Navigation og communication
Ventilation
Sprinkler og Sanitary Installation
Spare parts
Supervisor/man-power
VDR and ECDIS installation
ENGINE AND
PROPELLER REPAIR
Diesel engines overhaul/repair
2 and 4 stroke
Propeller repair, straightening
and balancing
Spare parts
new and reconditioned
Special welding,
arc/thermal spraying
Laser alignment: Coupling,
shaft and line bore
Turbocharger service
Worldwide service
Frederikshavn - An Easy Solution
for Superintendents
vESTERgAARd
MARINE SERvICE A/S
Havnepladsen 12, Bygning 14
DK-9900 frederikshavn
T +45 96 22 11 00
F +45 98 42 47 67
vms@vms.dk
www.vms.dk
P R O d u C T S
Ship outft and equipment
P R O d u C T S
Liferafts, evacuation slides
and chutes, lifejackets,
immersion suits and fre suits, other
maritime life-saving
equipment and personal
protective equipment
vIKINg lIFE-SAvINg
EquIPMENT A/S
Saedding ringvej 13
DK-6710 Esbjerg v
T +45 76 11 81 00
F +45 76 11 81 01
viking@viking-life.com
www.viking-life.com
Mass evacuation systems
n Chute based evacuation systems
n Slide based evacuation systems
n Direct boarding liferafts
Liferafts
n Standard liferafts
n Self-righting liferafts
n Davit-launched liferafts
n Special liferafts
n Davits
Protective clothing
n Immersion suits
n Work and constant wear suits
n Pilot and transportation suits
n Lifejackets
n Fire protective clothing
Rescue boats
n MOB boats
n Rigid and semi-rigid fast rescue boats
n Davits
Complete package of life-saving
appliances e.g.
n Lifebuoys
n Ladders
n Distress signals and communication
equipment
n Cabinets
n Medical equipment
Offshore evacuation and
embarkation systems
n Chute based evacuation systems
n Stair based embarkation systems
When you choose VIKING life-saving equipment you choose a sound
long term investment
VIKING provides a wide range of essential safety equipment for the maritime industry.
The unique VIKING network of 40 branches, agents, 270 authorised servicing stations and
worldwide stock points makes us a truly global provider offering cost-effective and
convenient service when and where you need it.
The VIKING advantage
See our full range of maritime life-saving equipment on
www.VIKINGsafetyshop.com or contact one of our worldwide offces.
88 | viKinG LifE-SAvinG EquiPMEnT A/S
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
WrTSiL DAnMArK A/S | 89
WRTSIl dANMARK A/S
Jens Munksvej 1
DK-9850 Hirtshals
T +45 99 56 99 56
F +45 98 94 39 20
dkinfo@wartsila.com
www.wartsila.dk
Wrtsil Danmark A/S
Axeltorv 8, 1. foor
DK -1609 copenhagen v.
Wrtsil Danmark A/S
Myhlenbergvej 62
DK-9510 Arden
P R O d u C T S
Engine supplier
Ship repair &
Marine Service.
Propeller repair
Alignment
Total Service Provider
Wrtsil Danmark A/S with approx. 150
employees performs a wide range of assignments
in the marine sector. With Wrtsil Corporation,
one of the worlds largest organiszations within
marine supplies, behind us our products and
quality set an extremely high standard.
Ship Repair
Our covered foating dock constitutes the basis
for a wide range of ship repairs and conversions.
Irrespective of weather and season we are able to
carry out repairs and maintenance work according
to the terms agreed upon.
Repair and production of propeller shafs
and rudder stocks
Te Propeller Department of Wrtsil
has developed a unique technique of cold
straightening that permits straightening of shafs
of virtually most sizes and executions. We also
produce new shafs at competitive prices and
delivery times.
Marine Service
We do all kinds of repairs to propeller and rudder
equipment all over the world e.g. boring of stern
tubes, sterring gears, drawing of shafs etc.
Our specially trained service mechanics are
very competent and used to working under
international conditions.
Wrtsil provides service and reconditioning
for ship machinery. We carry out all varieties of
overhauls and repairs of all engine types either
in our workshops, at the quay or by sailing
worldwide with the ship in question.
Alignment
Wrtsil Services specialises in propulsion
system services, using the latest advanced laser/
gyro technology for measuring, straightening
and supporting engines and shaf systems all
over the world. Wrtsil use our own set-up of
instruments to ensure a fast and precise result.
We carry out on-site adjustments of crankshafs.
Wrtsil Services has developed own sofware
and hardware for measuring of vibrations and
monitoring temperatures.
Ship Power
Wrtsil ofers sale, installation and service of
complete propulsion systems, main and auxiliary
engines for the fshing, shipping and ofshore
industry.
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
P R O d u C T S
Liferafts, evacuation slides
and chutes, lifejackets,
immersion suits and fre suits, other
maritime life-saving
equipment and personal
protective equipment
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
90 | YorK MArinE
YORK MARINE
Jens Juuls vej 28
DK-8260 viby J
T +45 87 36 35 00
F +45 87 36 35 01
cG-Eur-DK-vibyMarine@jci.com
www.yorkref.com
www.myrefcon.com
contacts:
John Worsoe
Sales Manager controls Ships
Peter Heisenberg
Sales Manager controls Terminals
Anders Steen Soerensen
Sales Manager HvAc refrigeration
P R O d u C T S
Ship outft and equipment
Machinery outside
engine spaces
Electrical and automation
cargo handling outft and
equipment
For over a century, YORK Marine has been a world
leading supplier of refrigeration solutions for air
conditioning and provision stores. Today YORK
Marine supplies refrigeration solutions for more
than 400 merchant vessels every year. Most of
them are standard confgurations, while others are
tailor-made. All solutions feature integrated, YORK
Marine designed computer control systems.
Te Controls division which develops these
systems is also the leading supplier of control
systems for boilers, global monitoring and con-
trolling of reefer containers. Te global monitor-
ing system monitors the conditions of the cargo
in reefer containers, no matter where they are
located in the Intermodal chain. Using remote
monitoring modems (RMM) and a RefBox/Ref-
Line or REFCON system, the operators can access
their containers locally or even globally through a
Web server, regardless of time and place.
With the most comprehensive global marine
service set-up in the world YORK Marine is able
to ensure maximum operating ef ciency through-
out the working life of all YORK solutions and
products.
YORK Marine
Marine screw chiller
Remote monitoring modem
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
r THE MAriTiME iSLAnD AEroE | 91
SBY VRFT AS
Building on Partnerships
Phone: +45 62 58 11 23
www.shipyard.dk
We specialize in engine and ship repair,
surface treatment, electricity work and
new buildings. We have 3 docks up to 115 m. in
length, 24 m. in breadth and 6 m. in depth.
GJ TEKNIK A/S Industri & Marine
Phone: +45 62 53 23 46
mail@gjteknik.dk
Maritime repairs - service and installation of fre
extinguishing systems
SEAINSURANCE AEROE
Phone: +45 62 53 10 73
mail@soassurancen.dk
SEAINSURANCE AEROE has developed from
being a local Danish Hull-Club to an interna-
tional and competitive company within ship
insurance.
MARSTAL NAVIGATIONSSKOLE
Phone: +45 62 53 19 68
kursus@marnav.dk
Te short course department gives:
mandatory STCW-courses for all
types of tankers.
follow up courses: chemical tankers,
dangerous goods
MARPOL refresher
full mission simulator
ISPS
heavy lif and lashing
JENS KRISTENSEN
Consulting naval architect
Pho: +45 62 53 37 20
jkr@mail.dk
Construction, Calculation, Drawings
Documentation, ISM, ISPS.
R THE MARITIME
ISlANd AEROE
The Danish island r,
located in the southern part
of Denmark (33 nautical miles
from the Kiel-canal) has for
hundred of years had a big
maritime tradition.
Today the island has a lot of
modern companies offering
a great number of services
within the shipping industry.
The island is served by four
ferry connections to the main
land and furthermore airport
with fight service on request.
3"962&4!3
www.shipyard.dk
Dokve| 5, DK 5985 Soby ro
tlf. +45 62 58 ll 23 - fax +45 62 58 l4 42
P R O d u C T S
Ship outft and equipment
Ship repairs and new
buildings
Ship construction and
documentation
Ship insurance
Ship crew courses
R Te Maritime Island Aeroe
See this catalogue as a pdf-fle
at www.dk-danishmarine.com/catalogue
dEgAARd &
dANNESKIOld-SAMSE A/S
Titangade 15
DK-2200 coPEnHAGEn n
T +45 35 31 10 00
F +45 35 31 10 01
ods@lr-ods.com
www.odegaard.dk
contacts:
John degaard
uffe Degn
P R O d u C T S
consultants
92 | DEGAArD & DAnnESKioLD-SAMSE A/S
Problems with:


Vibration?
Mechanical
failures?
We measure, predict
and propose a solution!
MER June 2006.indd 1 01-05-2006 11:47:11
Acoustics?
Noise?
Problems with:


Vibration?
Mechanical
failures?
We measure, predict
and propose a solution!
MER June 2006.indd 1 01-05-2006 11:47:11
Acoustics?
Noise?
93
94
AABEnrAA MoTorfABriK www.bukh.dk bukh@bukh.Dk +45 74 62 20 88
AALBorG inDuSTriES A/S www.aalborg-industries aal@aalborg-industries.com +45 99 30 40 00
Aco MArinE A/S www.acomarine.com acomarine@acomarine.com +45 45 76 94 38
AcTA A/S www.acta.dk cbo@acta.dk +45 63 17 61 00
ALfA LAvAL coPEnHAGEn A/S www.alfalaval.com alfalaval@alfalaval.com +45 39 53 60 00
ALfA LAvAL TAnK EquiPMEnT AB www.alfalaval.com/marine tankequipment.info@alfalaval.com +45 43 55 86 00
AMETEK DEnMArK A/S www.ametekcalibration.com ametek@ametek.dk +45 48 16 80 00
AMPLiDAn www.amplidan.com info@amplidan.com +45 45 16 62 01
APi MArinE APS www.api-marine.com info@api-marine.com +45 96 34 50 70
APv ProDucTS A/S www.apv.com marine.kolding@invensys.com +45 70 27 84 44
ATLAS incinErATorS A/S www.atlasinc.dk atlas@atlasinc.dk +45 55 34 66 55
BAc corroSion conTroL APS www.bacbera.dk info@bacbera.dk +45 70 26 89 00
BLuE WATEr SHiPPinG A/S www.bws.dk bwsebj@bws.dk +45 79 13 41 44
BLcHEr www.blucher.com marine@blucher.dk +45 99 92 08 00
BoLAco vALvES APS www.bolaco.com fje@bolaco.com +45 66 11 81 88
c.c. JEnSEn A/S www.cjc.dk windows@cjc.dk +45 63 21 20 14
c.c. JEnSEn A/S www.cjc.dk cjc@cjc.dk +45 63 21 20 14
cALLEnBErG A/S www.callenberg.dk info@callenberg.dk +45 70 26 35 01
cArL Bro AS www.carlbro.com cbg@carlbro.com +45 43 48 60 60
cArL f inTErnATionAL www.dline.com td@carlf.dk +45 45 33 33 33
cLoriuS conTroLS A/S www.cloriuscontrols.com mail@cloriuscontrols.com +45 77 32 31 30
DAMcoS A/S www.damcos.com damcos@damcos.com +45 55 78 72 00
DAMPA A/S www.dampa.com dampa@dampa.dk +45 63 76 13 20
DAnELEc ELEcTronicS A/S www.danelec.dk sales@danelec.dk +45 45 94 43 00
DAnfoSS A/S www.danfoss.com/ia danfoss@danfoss.com +45 74 88 22 22
DAnfoSS SEMco A/S firE ProTEcT www.danfoss-semco.com semsafe@danfoss-semco.com +45 70 26 38 01
DAniSH inTErior A/S www.danishinterior.dk info@danishinterior.dk +45 98 15 98 88
DAniSH MArinE SYSTEM A/S www.dmsystem.dk dms@dmsystem.dk +45 70 23 43 43
DAnLAMP A/S www.danlamp.com info@danlamp.dk +45 74 62 22 66
DAnSK WiLTon www.dansk-wilton.dk dw@dansk-wilton.dk +45 97 12 33 66
DAnTEc DYnAMicS A/S www.dantecdynamics.com info@dantecdynamics.com +45 44 57 80 00
DEif A/S www.deif.com deif@deif.com +45 96 14 96 14
DELTA www.delta.dk customercentre@delta.dk +45 72 19 45 00
DEn-JET MArinE A/S www.denjet.com denjetmarine@denjet.com +65 62 68 12 38
DESMi DAnMArK A/S www.desmi.com marine@desmi.com +45 96 32 81 11
E. vEJvAD HAnSEn APS www.hansenchairs.com mail@hansenchairs.com +45 75 13 19 44
ELLEHAMMEr A/S www.ellehammer.dk ellehammer@ellehammer.dk +45 43 45 50 55
EMco conTroLS A/S www.emco.dk emco@emco.dk +45 45 76 94 00
EMErSon ProcESS MAnAGEMEnT www.emersonproces.com/ damcos@damcos.com +45 55 78 72 00
EMri A/S www.emri.dk sales@emri.dk +45 44 91 82 04
forcE TEcHnoLoGY www.force.dk dmi@force.dk +45 72 15 77 00
fuELSAMPLEr.coM APS www.fuelsampler.com denmark@fuelsampler.com +45 49 13 69 00
fYnS KrAn uDSTYr A/S www.fyns-kran.com kra@fyns-kran.dk +45 87 12 42 00
GABriEL A/S www.gabriel.dk mail@gabriel.dk +45 96 30 31 00
GErTSEn & oLufSEn AS www.gertsen-olufsen.dk mdc@gertsen-olufsen.dk +45 45 76 36 00
GrEnAA MoTorfABriK www.grmo.dk info@grmo.dk +45 86 32 06 66
GruMSEnS MASKinfABriK A/S www.grumsen.dk grumsen@grumsen.dk +45 75 12 54 22
GrunDfoS A/S www.grundfos.com poersted@grundfos.com +45 87 50 14 00
HAMMEr TPPEr A/S www.taeppe.dk ht@hammertaepper.dk +45 96 27 00 00
HAMWorTHY SvAnEHJ A/S www.svanehoj.com svanehoj@hamworthy.com +45 96 37 22 00
HAnS JEnSEn LuBricATorS A/S www.hjlubri.dk hjl@hjlubri.dk +45 98 57 19 11
HEco fiLTrATion A/S www.heco-fltration.dk fltration@heco.dk +45 76 74 16 60
HEco inTErnATionAL A/S www.Heco.dk Heco@Heco.dk +45 75 89 21 22
HEMPEL A/S www.hempel.com jka@dk.hempel.com +45 45 93 38 00
HEnninG frKJr A/S www.hf-esbjerg.dk hf@hf-esbjerg.dk +45 75 14 11 22
HYDrATEcH A/S www.hydratech.dk info@hydratech.dk +45 98 98 02 00
iBM DAnMArK A/S www.ibm.com lan@dk.ibm.com +45 45 23 30 00
inExA A/S www.inexa.com info@inexa.dk +45 46 56 37 00
inSTruMATic A/S www.instrumatic.com info@instrumatic.com +45 86 89 09 11
ioP MArinE A/S www.obel-p.dk obel-p@obel-p.dk +45 44 98 38 33
iron PuMP A/S www.ironpump.com iron@ironpump.dk +45 44 91 67 88
MEMBErS of THE DAniSH MArinE GrouP
95
iSic A/S www.isic.dk skr@isic.dk +45 70 20 70 77
KE-BurGMAnn BrEDAn A/S www.bredan.com bredan@bredan.dk +45 96 74 28 00
KnuD E. HAnSEn A/S www.knudehansen.com keh@knudehansen.com +45 32 83 13 91
KorSr ProPELLEr A/S www.propeller.dk kmf@propeller.dk +45 58 37 09 34
KvADrAT A/S www.kvadrat.dk kvadrat@kvadrat.dk +45 89 53 18 66
LinDAB vEnTiLATion A/S www.lindab.dk nc@lindab.dk +45 73 23 23 23
LoGiMATic www.logimatic.dk lmc@logimatic.dk +45 96 34 70 00
LoGSTor MArinE www.logstor.com marine@logstor.com +45 99 66 10 00
LYnGS MArinE A/S www.lyngsoe.com sales@lyngsoe.com +45 45 16 62 00
LGSTruP-STEEL A/S www.logstrup.com info@logstrup.dk +45 49 12 75 00
MAn DiESEL A/S www.manbw.com manbw@dk.manbw.com +45 33 85 11 00
MAn DiESEL A/S www.manbw.com alpha@dk.manbw.com +45 96 20 41 00
MAriMATEcH A/S www.marimatech.com mail@marimatech.com +45 86 91 22 55
MArinE ALiGnMEnT A/S www.easeacon.com easeacon@easeacon.com +45 44 95 13 21
MArinE conTrAcTinG inTL. A/S www.mci-grp.com mci@mci-grp.dk +45 47 33 78 00
MArinE TEcHnic - DEnMArK www.marinetechnic.com sales@marinetechnic.com +45 55 70 06 99
MAriTEAM A/S www.mariteam.dk permich@mariteam.dk +45 39 18 66 44
MArSTAL nAviGATionSSKoLE www.marnav.dk marnav@marnav.dk +45 62 53 10 75
MEKAnorD A.S. www.mekanord.dk mekanord@mekanord.dk +45 96 20 14 00
METALocK DEnMArK A/S www.metalock.dk info@metalock.dk +45 43 73 66 20
MSr-conSuLT APS www.Msr-consult.com erik.bastiansen@msr-consult.com +45 45 81 04 85
norDHAvn A/S MASKinfABriK www.nordhavn.dk nordhavn@nordhavn.dk +45 70 21 34 00
norDMArK MASKinfABriK A/S www.nordmark-maskinfab ej@nordmark-maskinfabrik.dk +45 98 46 98 00
norTH invEnT A/S www.northinvent.com info@northinvent.com +45 70 11 11 00
novEnco A/S www.novenco.biz info@novenco.biz +45 70 12 42 22
oDEnSE STEEL SHiPYArD LTD. www.oss.dk marketing@oss.dk +45 63 97 12 34
orSKov YArD A/S www.orskov.dk orskov@orskov.dk +45 96 20 85 00
oSK-SHiPTEcH A/S www.osk.dk naval@osk.dk +45 86 17 80 99
oxYMAT A/S www.oxymat.dk sales@oxymat.dk +45 48 79 78 11
PrES-vAc EnGinEErinG APS www.pres-vac.com presvac@pres-vac.com +45 48 17 40 55
rESon A/S www.reson.com reson@reson.dk +45 47 38 00 22
rocKWooL A/S DEnMArK www.rockwool-marine.com export@rockwool.dk +45 46 56 16 16
ro-cLEAn DESMi A/S www.ro-cleandesmi.com hj.ro-clean@desmi.com +45 65 91 02 01
SAinT-GoBAin MArinE APPLicATio www.saint-gobain-marine.com marine@saint-gobain.com +45 62 24 48 48
ScAnDinAviAn BoiLEr SErvicE A/ www.sbs-international. sbs@sbs-eu.com +45 70 27 10 00
ScAnEL inTErnATionAL A/S www.scanel.dk info@scanel.dk +45 96 22 32 42
ScAn-STEErinG APS www.scan-steering.com info@scan-steering.com +45 97 31 12 47
SELco A/S www.selco.com selco.dk@selco.com +45 70 26 11 22
SEnMATic A/S www.senmatic.com dk@senmatic.com +45 64 89 22 11
SHiPSErv www.shipserv.com info@shipserv.com +45 33 32 31 20
SiKA DAnMArK A/S www.sika.dk sika@dk.sika.com +45 48 18 85 85
SonDEx A/S www.sondex.dk info@sondex.dk +45 76 30 61 00
STEncA TrADinG A/S www.stenca.dk ctj@stenca.dk +45 96 32 48 12
SunTExT APS www.suntext-graphic.com sg@suntext-graphic.com +45 47 31 55 35
SvEnDBorG BrAKES A/S www.svendborg-brakes.c sb@svendborg-brakes.dk +45 63 25 52 55
SfArT www.soefart.dk red@soefart.dk +45 86 25 89 00
TDc ToTALLSninGEr A/S www.tdc.dk/lyngbyradio lyngbyradio@tdc.dk +45 66 63 48 00
TEMPrESS A/S www.tempress.dk sales@tempress.dk +45 89 32 52 10
THrAnE & THrAnE A/S www.tt.dk cj@thrane.com +45 39 55 88 00
TM THErKiLDSEn MArinE APS www.therkildsenmarine.com info@therkildsenmarine.com +45 70 20 43 75
uni-SAfE ELEcTronicS A/S www.unielec.dk info@unielec.dk +45 32 86 05 25
vESTAS AircoiL A/S www.vestas.biz va@vestas.biz +45 97 34 18 00
vESTErGAArD MArinE SErvicE A/S www.vms.dk vms@vms.dk +45 96 22 11 00
viKinG LifE-SAvinG EquiPMEnT www.viking-life.com viking@viking-life.com +45 76 11 81 00
WEncon APS www.wencon.com wencon@wencon.com +45 64 81 10 10
WESTruP A/S www.westrup.com info@westrup.com +45 58 52 25 64
WiLLY HAnSEn willyhansen@elektronik.dk +45 86 22 33 68
WrTSiL DAnMArK A/S www.wartsila.dk dkinfo@wartsila.com +45 99 56 99 56
YorK MArinE www.yorkref.com cG-Eur-DK-vibyMarine@jci.com +45 87 36 35 00
DEGAArD & DAnnESKioLD-SAMSE www.odegaard.dk ods@lr-ods.com +45 35 31 10 00
PREFERRED MAKERS LIST

You might also like