You are on page 1of 7

NOISE VIBRATION CONTROL GENERATOR VIBRATION MOUNTS

Engine driven generators are known to produce undesirable vibrations and unwanted noise, as a result of moving and rotating of its various parts. The transmission of these vibrations should be minimized to prevent physical damage to the generator set itself due to self generated resonant frequencies and the surrounding structures supporting the generator set. Noise Vibration Control needs to be achieved through the use of anti vibration mounts to ensure reliable power delivery.

Noise Vibration Control Generator Mountings Thus, vibratory frequencies induced in the surrounding building structure through generators adversely affect nearby situated sensitive testing, measuring equipments and cause undue stress due to vibration and noise nuisance. Minimizing generator set vibration through the use of noise vibration control generator mountings can

both reduce the transfer of energy to building structures and ensure longer life for generator set components. Dynemech noise vibration control anti vibration generator set mounts (AVMs) are the structures used to absorb the vibrations and dampen the harm causing vibratory shocks and disturbing forces.

Noise Vibration Control Flexifoot Machine Mounts

Elastomeric Generator Mounts Elastomeric noise vibration control mounts like DLC,DML,DLK, have been used to reduce the transmission of noise and vibration from mechanical equipment onto a building structure, support, isolate and suspend mechanical equipment, and to protect equipment from damage from travelling vibrations. These vibration noise control products consist of the elastomeric compound sandwiched between the two metal cover plates to enhance lateral stiffness and to protect the elastomeric compound from oil, solar or chemical harm. These metal covers also provide varied generating sets installation configurations of these noise vibration control mounts based on the foot design. The elastomer used leads to development of nonlinear behavior of the noise vibration control generator mounts. The ability of an elastomer of the generator vibration dampers to convert energy to motion allows it to absorb vibration. An elastomeric noise vibration isolator between the generator foot

and the base minimizes the transfer of energy to the base.

Insulation Plate for Vibration Damping in Gensets Dynemech Insulation Plate or rubber pad are also effective in damping high frequency vibrations and containing unanticipated upward forces generated in generating sets. These noise vibration control insulation plate protect the generator sets and surroundings from unwanted vibrations by absorbing them and hence, ensuring smooth and quiet operation of the engine generators.

Spring Noise Vibration Control Genset Mountings Dynemech Spring Mountings and Viscous Dampeners with vibration absorbing viscous component are most useful for absorbing low frequency loads such as a single large impact to ensure efficient noise vibration control. Concurrently, the viscous component can return the noise vibration control mounts quickly to its original state, ready for the next cycle of deformation, and thus allowing it to cope with low to higher frequency loads. Hospitals, data centers, rooftop installations , large, multi-genset installations, hotels, resorts,cinemas are examples of applications that require higher-than-normal levels of vibration attenuation and noise control.

Metallic Spring Genset Mountings

DYNEMECH Spring Isolators, isolate high dynamic vibrations generated by floor-mounted industrial equipments such as compressors, blowers, generators which are prone to frequent start up and shut down, and equipment that is slow to reach operating speed. A spring isolator gives desired natural frequency to obtain phase difference in the frequencies for a rotating machine. In many cases viscous damping is required to limit excessive movement which could occur as a machine operates at a speed near to, or coinciding with the resonant frequencies of the system. They provide vibration isolation of 80-95%.
FOR FURTHER DETAILS on Generator Mounts: Dynemech Systems Pvt. Ltd. Email: sales@dynemech.com Phone: +(91)-9810760131, +(91)-9911145131, +(91)-7503004224 www.vibrationmountsindia.com; www.dynemech.com

You might also like