Professional Documents
Culture Documents
Section 1.2
ISO LF Flanges
DN320LF
HV Series
Figure 1 Claw-clamp style
261 318 Seal side Air side 267 12 275 285 290 324 355 17
ISO LF Flanges
DN250LF
HV Series
Seal side
Air side
ISO LF
ISO LF
365 370
Features
Retaining ring I I I 310 16 I I I 335 I
HV rated to 1x10-8 mbar High-temperature rated to 200C Symmetric and non-rotatable geometry Rotatable bolt ring available Elastomer O-ring seal Claw-clamp style or bolt style fastening ISO-compatible design
Features
HV rated to 1x10-8 mbar
Retaining ring
395 425
20
ISO-compatible design
Specifications
11 - 12 places
Specifications
Seal side
M12, (8-12 required) Hexagonal head, M12 Hexagonal Bolts: 9-14 Nm 1x10-8 mbar
Vacuum range
1x10-8 mbar
Spacer ring
Spacer ring
318
Centring ring
Weight
34 kg maximum
Tube OD nominal Reference L250-B L250-W L250-BB L250-BW 102 246 285 142 6.0 1.4 2.0 4.3
Figure
Flange reference
Fastening method
Wt kg
Part number
Figure 1 1 2 2
Part number
Blank
Claw-clamp
267
Weld
Claw-clamp
Blank
Bolt
267
Weld
Bolt
Wt kg Reference
Part number
94 13 141 20
Wt kg 5.4 0.2
Part number
205 21 308 32
A rotatable bolt ring assembly is used to add bolt holes to a standard claw-clamp style ISO LF flange. An assembly consists of one aluminium bolt ring and one retaining ring. The retaining ring fits into a groove on a claw-clamp style flange and holds the bolt ring onto the flange. Replacement retaining rings are also available separately.
7853004 7853024
A rotatable bolt ring assembly is used to add bolt holes to a standard clawclamp style ISO LF flange. An assembly consists of one aluminium bolt ring and one retaining ring. The retaining ring fits into a groove on a claw-clamp style flange and holds the bolt ring onto the flange. Replacement retaining rings are also available separately.
Retaining ring
7853005 7853025
All dimensions are nominal in millimetres unless specified Weights given are approximate
All dimensions are nominal in millimetres unless specified Weights given are approximate