You are on page 1of 7

BIBLIOGRAPHY

[1]

Kerr, H. W. and Kurz, W., Int. Mater. Rev., 1996, 41, 129.

[2]

Fredriksson, H. and Nyln, T., Met. Sci., 1982, 16, 283.

[3]

St John, D. H., Acta Metall. Mater., 1990, 38, 631.

[4]

Titchener, A. P. and Spittle, J. A., Met. Sci., 1974, 8, 112.

[5]

Uchida, S., Systematik and Kinetik Peritektischer Umwandlungen, PhD


thesis, Technical University, Stuttgart, 1980.

[6]

Exner, H. E. And Petzow, G., in Metals handbook, 9th edn, Vol.9, 675-680,
1985, Metals Park, OH, ASM.

[7]

Wagner, C., Acta Metall., 1969, 17, 99.

[8]

St John, D. H. and Hogan, L. M., Acta Metall., 1987, 35, 171.

[9]

Lopez, H. F., Acta Metall. Mater., 1991, 39, 1543-1548.

[10]

St John, D. H. and Hogan, L. M., Acta Metall., 1977, 25, 77.

[11]

Scheil, E., Zeitschrift fur Metallkunde, 1942, 34, 70.

[12]

Uhlmann, D. R. and Chadwick, G. A., Acta Metall., 1961, 9, 835.

[13]

Shcherbakov, G. I., David, S. A. and Brody, H. D., Scripta Metall., 1974, 8,


1239.

[14]

Barker, N. J. W. and Hellawell, A., Met. Sci., 1974, 8, 353.

[15]

Boettinger, W. J., Metall. Trans., 1974, 5, 2023.

[16]

Titchener, A. P. and Spittle, J. A., Acta Metall., 1975, 23, 497.

[17]

Brody, H. D. and David, S. A., in Solidification and casting of meals, 144151, 1979, London, The Metals Society.

[18]

Ostrowski, A. and Langer, E. W., in Solidification and casting of metals, 139143, 1979, London, The Metals Society.

[19]

Trivedi, R., Metall. Mater. Trans., 1995, 26A, 1583.

[20]

Kurz, W. and Fisher, D. J., Fundamentals of solidification, 133-135, 1989, 3rd


edn, Aedermannsdorf, Switzerland, Trans Tech Publications.

[21]

Perepezko, J. H. and Boettinger, W. J., Mat. Res. Soc. Symp. Proc., 1983, 19,
223.

188

[22]

Hultgren, R., Desai, P. D., Hawkins, D. T., Glesier, M., Kelley, K. K. and
Wagman, D. D., Selected values of thermodynamic properties of the
elements, ASM, Metals Park, Ohio, 1973.

[23]

Cech, R. E., J. Metals, 1956, 206, 585.

[24]

Borromee-Gautier, C., Giessen, B. C. and Grant, N. J., J. Chem. Phys., 1968,


48, 1905.

[25]

Cisse, J., Kerr, H. W. and Bolling, G. F., Metall. Trans., 1974, 5, 633.

[26]

Hall, E. L. and Huang, S. C, Acta Metall. Mater., 1990, 38, 539.

[27]

Lser, W., Volkmann, T. and Herlach, D. M., Mater. Sci. Eng., 1994, 178A,
163.

[28]

Shih, C. H. S., Molian, P. A., McCallom, R. W. and Balachand-Ran, U., J.


Mater. Sci., 1994, 29, 1629.

[29]

Umeda, T., Okane, T. and Kurz, W., Acta Metall. Mater., 1996, 44, 4209.

[30]

Fredriksson, H., Metals handbook, Vol. 15, ASM, Metals Park, OH, 1988, p.
125.

[31]

Jackson, K. A., Trans. Am. Inst. Min. Engnrs., 1968, 242, 1275.

[32]

Gill, S. C. and Kurz, W., Acta Metall., 1995, 43, 139.

[33]

Kurz, W. and Gilgien, P., Mater. Sci. Eng., 1994, 178A, 171.

[34]

Boettinger, W. J. and Coriell, S. R., in Science and technology of the


undercooled melt, ed. Sahm, P. R. et al, NATO ASI Series E, No. 114, 81108, 1986, Dordrecht, Martinus Nijhoff.

[35]

Aziz, M. J., J. Appl. Phys., 1982, 53, 1158.

[36]

Kurz, W., Giovanola, B. and Trivedi, R., Acta Metall., 1986, 34, 823.

[37]

Burden, M. H. and Hunt, J. D., J. Crystal Growth, 1974, 22, 109.

[38]

Vandyoussefi, M., Microstructure selection during directional solidification


and solid-state transformation in Fe-Ni alloys, Ph.D thesis, Swiss Federal
Institute of Technology, Lausanne, 1997.

[39]

Vandyoussefi, M., Kerr, H. W. and Kurz, W., in SP97, Proceedings of the 4th
Int. Conf. on Solidification Processing, ed. Beech, J. and Jones, H.,
Department of Engineering Materials, University of Sheffield, UK, 1997,
p.564.

[40]

Hunziker, O., Vandyoussefi, M. and Kurz, W., Acta Mater., 1998, 46, 6325.

189

[41]

Tiller, W. A., Jackson, K. A., Rutter, J. W. and Chalmers, B., Acta metall.,
1953, 1, 428.

[42]

Chalmers, B., Physical Metallurgy, 271-272, 1959, New York, John Wiley
and Sons.

[43]

Livingston, J. D., Mater. Sci. Eng., 1971, 7, 61.

[44]

Flemings, M. C., Solidification processing, 177-180, 1974, New York,


McGraw-Hill.

[45]

Jackson, K. A. and Hunt, J. D., Trans. AIME, 1966, 236, 1129.

[46]

Vandyoussefi, M., Kerr, H. W. and Kurz, W., Acta mater., 2000, 48, 2297.

[47]

Laraia, V. J. and Heuer, A. H., Scripta Metall. Mater., 1991, 25, 2803.

[48]

Trivedi, R. K., in Lectures on the theory of phase transformation, ed.


Aaronson, H. I., A.I.M.E., New York, 1975, 51-82.

[49]

Lee, J. H. and Verhoeven, J. D., J. Crystal Growth, 1994, 144, 353.

[50]

Hunt, J. D. and Chilton, J. P., J. Inst. Met., 1963-64, 92, 21.

[51]

Busse, P. and Meissen, F., Scripta Mater., 1997, 36, 653.

[52]

Nagashio, K., Takamura, Y. and Kuribayashi, K., Scripta Mater., 1999, 41,
1161.

[53]

Zimmermann, M., Karma, A. and Carrard, M., Phys. Rev., 1990, 42B, 833.

[54]

Kaur, I., Mishin, Y. and Gust, W., Fundamentals of grain and interphase
boundary diffusion, p.307, 1995, Chichester, West Sussex, Wiley.

[55]

Williams, D. B. and Butler, E. P., Int. Metals Rev., 1981, 3, 153.

[56]

Porter, D. A. and Edington, J. W., Proc. R. Soc., 1977, A358, 335.

[57]

Zieba, P., Acta Mater., 1998, 46, 369.

[58]

Tu, K. N. and Turnbull, D., Acta Metall., 1967, 15, 369.

[59]

Tu, K. N. and Turnbull, D., Acta Metall., 1967, 15, 1317.

[60]

Fournelle, R. A. and Clark, J. B., Metall. Trans., 1972, 3, 2757.

[61]

Gust, W., Predel, B. and Diekstall, K., Z. Metallk., 1977, 68, 619.

[62]

Bee, J. V., Ralph, B., Soffa, W. A. and Ecob, R. C., in Phase transformations,
Vol. 2, II-19, 1979, London, The Institution of Metallurgists.

[63]

Gupta, S. P. and Parthiban, G. T., Z. Metallk., 1985, 76, 505.

190

[64]

Hillert, M. and Purdy, G. R., Acta Metall., 1978, 26, 333.

[65]

Vijayalakshmi, M., Seetharaman, V. and Raghunathan, V. S., Acta Metall.,


1982, 30, 1147.

[66]

Afanasyev, N. I. and Yelsukova, T. F., Phys. Me. Metallorg., 1981, 52, 83.

[67]

Williams, D. B. and Edington, J. W., Acta Metall., 1976, 24, 323.

[68]

Purdy, G. R., in Materials Science and Technology, ed. Cahn, R. W., Hansen,
P. and Krammer, E. J., Vol.5, 306-338, 1991, VCH, Weinheim

[69]

Baumann, S. F., Michael, J. and Williams, D. B., Acta Metall., 1981, 29, 1343.

[70]

Frebel, M. and Schenk, J., Z. Metallk., 1979, 70, 230.

[71]

Gust, W., Chuang, T. H. and Predel, B., Decomposition of alloys: The early
stages, ed. Hansen, P. et al, 208-213, 1984, Oxford, Pergamon Press.

[72]

Zener, C., Trans. AIME, 1946, 167, 550.

[73]

Turnbull, D., Acta Metall., 1955, 3, 55.

[74]

Aaronson, H. I. and Liu, Y. C., Scripta Metall., 1968, 2, 1.

[75]

Petermann, J. and Hornbogen, E., Z. Metallk., 1968, 59, 814.

[76]

Lcke, K., Z. Metallk., 1961, 52, 1.

[77]

Doherty, R.D., in Physical Metallurgy, ed. Cahn, R. W. and Hoasen, P.,


p.1002, 1983, North-Holland Physics, Amsterdam.

[78]

Mukhopadhyay, P. and Raman, V., Metallography, 1978, 11, 481

[79]

Chuang, T. H., Fournelle, R. A., Gust, W. and Predel, B., Scripta metal., 1986,
20, 25.

[80]

Manna, I. and Pabi, S. K., J. Mater. Sci. Lett., 1990, 9, 1226.

[81]

Manna, I., Pabi, S. K. and Gust, W., J. Mater. Sci., 1991, 26, 4888.

[82]

Manna, I., Pabi, S. K. and Gust, W., Acta metal. mater., 1991, 39, 1489.

[83]

Howe, J. M., Interfaces in Materials, pp. 297-469, 1997, New York, Wiley.

[84]

Murr, L. E., Interfacial Phenomena in Metals and Alloys, pp.165-251, 1975,


London, Addison-Wesley.

[85]

Massalski, T. B., Binary Alloy Phase Diagrams, American Society for Metals,
1986.

[86]

Zimmermann, M., Carrard, M. and Kurz, W., Acta metal., 1989, 37, 3305.

191

[87]

Juarez-Islas, J. A., Warrington, D. H. and Jones, H., J. Mater. Sci., 1989, 24,
2076.

[88]

Rosolowski, J. H., Phy. Rev., 1961, 124, 1828.

[89]

H. Y. Liu and H. Jones, Acta Metall. Mater., 40 (1992) 2003.

[90]

Rappaz, M., Gremaud, M., Dekumbis, R. and Kurz, W., Proc. Europ. Conf.
Laser Treat. Of Materials, ECLAT, Bad Nauheim DGM, p.43, 1987.

[91]

Pantelis, D. J. and Vonatsos, K. N., Applied Physics, 67A, 1998, 435.

[92]

Charles T. Lynch, Practical Handbook of Materials Science, 1989, Boca


Raton, Fla., CRC Press.

[93]

Smithells, C. J., Smithells metals reference book, ed. Brandes E.A. and Brook
G.B., 1998, 7th edn., Oxford ; Boston : Butterworth-Heinemann.

[94]

Akdeniz, M. V. and Wood, J. V., J. Mater. Sci., 1996, 31, 545.

[95]

Walton, D., Tiller, W. A., Rutter, J. W. and Winegard, W. C., Trans. AIME,
1955, 203, 1023.

[96]

Tiller, W. A. and Rutter, J. W., Can. J. Phys., 1956, 34, 96.

[97]

Morris, L. R. and Winegard, W. C., J. Crystal Growth, 1969, 5, 361.

[98]

Sato, T. and Ohiro, G., Trans. JIM, 1971, 12, 285.

[99]

S. N. Tewari and M. A. Chopra, J. Crystal Growth 118 (1992) 183.

[100] A. Ludwig and W. Kurz, Mater. Sci. Forum 215-216 (1996) 13.
[101] Ludwig, A. and Kurz, W., Acta mater., 1996, 44(9), 3643.
[102] A. Ludwig, R. Schadt and P. R. Sahm, Mater. Sci. Eng. A226-228 (1997) 124.
[103] Tokieda, K., Yasuda, H. and Ohnaka, I., Mater. Sci. Eng., A262 (1999) 238.
[104] Trivedi, R. and Park, J. S., J. Cryst. Growth, 235 (2002) 572.
[105] Trivedi, R. and Park, J. S., J. Cryst. Growth, 2002, 235, 572.
[106] Mullins, W. W. and Sekerka, R. F., J. Appl. Phys., 1963, 34, 323.
[107] Mullins, W. W. and Sekerka, R. F., J. Appl. Phys., 1964, 35, 444.
[108] Kurz, W. and Trivedi, R., Metall. Mater. Trans., 1996, 27A, 625.
[109] Trivedi, R. and Kurz, W., Int. Mater. Rev., 1994, 39, 49.
[110] Hunt, J. D. and Lu, S. Z., Metall. Mater. Trans., 1996, 27A, 611.

192

[111] David, S. A. and Vitek, J. M., Int. Mater. Rev., 1989, 34, 213.
[112] McCartney, D. G. and Hunt, J. D., Acta metal., 1981, 29, 1851.
[113] Kim, H. K., Earthman, J. C. and Lavernia, E. J., Acta metal. mater., 1992, 40,
637.
[114] Pryds, N. H., Juhl, T. W. and Pedersen, A. S., Metall. Trans., 1998, 30A, 1817.
[115] Pan, Q. Y., Huang, W. D., Lin, X. and Zhou, Y. H., J. Crystal Growth, 1997,
181, 109.
[116] Somboonsuk, K., Mason, J. T. and Trivedi, R., Metall. Trans., 1984, 15A, 967.
[117] Esaka, H. and Kurz, W., J. Crystal Growth, 1985, 72, 578.
[118] Esaka, H. and Kurz, W., Z. Metallkd., 1985, 76, 127.
[119] Eshelman, M. A., Seetharaman, V. and Trivedi, R., Acta metal., 1988, 36,
1165.
[120] Hunt, J. D., in Solidification and casting of metals, 1979, p. 3-9, London, The
Metals Society.
[121] Kurz, W. and Fisher, D. J., Acta metall., 1981, 29, 11.
[122] Hunt, J. D. and Lu, S. Z., Metall. Mater. Trans., 1996, 27A, 611.
[123] Ma, D. X. and Sahm, P. R., Metall. Mater. Trans., 1998, 29A, 1113.
[124] Kattamis, T. Z. and Flemings, M. C., Transactions of the Metallurgical Society
of AIME, 1965, 233, 992.
[125] Feurer, U. and Wunderlin, R., DGM Fachbereicht, Oberursel, 1977.
[126] Gill, S. C. and Kurz, W., Acta metal. mater., 1993, 41, 3563.
[127] Patchett, J. A., Ph.D. thesis, University of Florida, 1988.
[128] Kucherenko, L. S., Russ. Metall., 1985, 6, 63.
[129] King, A. H., Int. Mater. Rev., 1987, 32, 173.
[130] Yoon, D. Y., Int. Mater. Rev., 1995, 40, 149.
[131] Manna, I., Interface Sci., 1998, 6, 113.
[132] Martin, J. W., Doherty, R. D. and Cantor, B., Stability of Microstructure in
Metallic Systems, pp. 14-15, 1997, Cambridge University Press.
[133] Dyment, F. and Iribarren, M. J., Phil. Mag. A, 1991, 63, 959.

193

[134] Machlin, E. S., Thermodynamics and kinetics relevant to materials science,


pp. 309-336, 1991, New York, GIRO Press.
[135] Kattamis, T. Z. and Flemings, M. C., Trans. AIME, 1965, 233, 992.
[136] Flemings, M. C., Poirier, D. R., Barone, R. V. and Brody, H. D., J. Rion Steel
Inst., 1970, 208, 371.
[137] Flemings, M. C., Solidification Processing, 1974, McGraw-Hill, New York.
[138] Shewmon, P. G., Trans. Metall. Soc. AIME, 1965, 233, 736.
[139] Manna, I., Jha, J. N. and Pabi, S. K., J. Mater. Sci. 34 (1999) 773.
[140] Purdy, G. R. and Lange, N., in Decomposition of Alloys, The Early Stages,
ed. Haasen, P., Gerold, V., Wagner, R. and Ashby, M. F., pp. 214-220, 1984,
Pergamon, Oxford.
[141] Furuhara, T. and Aaronson, H. I., Acta metall., 1991, 39, 2887.
[142] Furuhara, T. and Maki, T., Phil. Mag. Lett., 1994, 69, 31.
[143] Aaronson, H. I. and Pande, C. S., Acta mater., 1999, 47, 175.
[144] Shapiro, J. M. and Kirkaldy, J. S., Acta metal., 1968, 16, 579.
[145] Shapiro, J. M. and Kirkaldy, J. S., Acta metal., 1968, 16, 1239.
[146] Manna, I., Jha, J. N., Pabi, S. K. and Gust, W., Mater. Res. Soc. Symp. Proc.,
1992, 238, 517.

194

You might also like