You are on page 1of 2

******************************************************************

OMS Front End Management System Release Notes August, 2013


******************************************************************
OMS v9.5 build 9.5.16
Copyright (c) 2013 OTN Systems n.v.
******************************************************************
The N50/N70 series nodes are non-modular nodes with a network card
functionality and an extended Layer2/Layer3 Ethernet interface.
The OMS Front End Manager or OMS-FEM is an OMS extension and
necessary to configure that extended Layer2/Layer3 Ethernet interface.
The OMS-FEM is a Server/Client environment, where the client provides
a GUI environment.
--------
CONTENTS
--------
1. FIXED AND VERIFIED DEFECTS
2. KNOWN BUGS, LIMITATIONS, AND WORKAROUNDS

******************************************************************
1. FIXED AND VERIFIED DEFECTS
******************************************************************
Most important fixed and verified defects in OMS-FEM version 9.5
================================================================
A. Software
- Defect 13355: IP ACL - Add rule with LAG fails, DD-MIB corrupt.
Workaround: Delete every ACL rule and recreate, but the
rule with LAG should be created first.
- Defect 13517: Creation of N50/N70 node with existing X3M node number
fails correctly, but node is still created in OMS-FEM.
Workaround: You cannot delete this node anymore in OMS-FEM. You
have to create a new database.
B. Loadware
- Defect 11137: Traffic loop of a few seconds in LAG after reconnecting
link.
- Defect 12543: PoE - Node delivers always power when Class 4 equipment
is connected, no matter how PoE is configured
******************************************************************
2. KNOWN BUGS, LIMITATIONS, AND WORKAROUNDS
******************************************************************
A. Sofware
- Defect 11456: VLAN name may not contain the character /
otherwise the OMS-FEM gui will crash.
- Defect 12686: PoE on ports will be set to class 4 when migrating to
OMS 9.2.x, due to the use of PoE enhanced in OMS 9.2.x

Workaround: Change PoE classes manually per port after
migration.
- Defect 13358: IP ACL - delete LAG not possible when used before in IP
ACL rule
Workaround: Delete every ACL rule and then you can delete
the LAG. Afterwards you have to recreate the other ACL rules.
- Defect 13381: Cursor stuck on hourglass after error in wizards.
Workaround: You can continue working. The hourglass disappears
with the next action.
B. Loadware
- PIM performance indications:
* PIM: number of registrations per node is tested up to 1000 entries.
* The number of simultaneous PIM joins/leaves is tested upto 500 with
a rate of 200 packets/second.
******************************************************************
Copyright (c) 2013 OTN Systems n.v.
All rights reserved.
******************************************************************

You might also like