Professional Documents
Culture Documents
Drill-Thin Thinner
Version 1.4
:
:
Drill-Thin Thinner
1016816
Use
Company
Emergency telephone:
Health:
866.442.9628 (North America)
1.832.813.4984 (International)
Transport:
North America: CHEMTREC 800.424.9300 or 703.527.3887
Asia: +800 CHEMCALL (+800 2436 2255)
EUROPE: BIG +32.14.584545 (phone) or +32.14583516 (telefax)
South America SOS-Cotec Inside Brazil: 0800.111.767 Outside Brazil: +55.19.3467.1600
Responsible Department
E-mail address
Website
:
:
:
Color: Brown
Odor: Odorless
: Carcinogen
:
Carcinogenicity, Category 1A
Acute aquatic toxicity, Category 3
Chronic aquatic toxicity, Category 3
GHS-Labeling
MSDS Number:100000014172
1/11
Drill-Thin Thinner
Version 1.4
Symbol(s)
Signal Word
Danger
Hazard Statements
Precautionary Statements
Prevention:
P202: Do not handle until all safety precautions have been
read and understood.
P273: Avoid release to the environment.
P280: Wear protective gloves/ eye protection/ face protection.
Response:
P305 + P351 + P338: IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
P308 + P313: IF exposed or concerned: Get medical advice/
attention.
Storage:
P405: Store locked up.
Disposal:
P501: Dispose of contents/ container to an approved waste
disposal plant.
Carcinogenicity:
IARC
NTP
ACGIH
Molecular formula
Mixture
Component
Methyl ester of sulfonated tannin
Ferrous Sulfate
Stannous Sulfate
Crystalline Silica
CAS-No.
79770-92-6
17375-41-6
7488-55-3
14808-60-7
Weight %
80
9
10
1
General advice
MSDS Number:100000014172
Drill-Thin Thinner
Version 1.4
If inhaled
If swallowed
Not applicable
Autoignition temperature
No data available
Unsuitable extinguishing
media
Special protective
equipment for fire-fighters
Further information
Hazardous decomposition
products
Personal precautions
Environmental precautions
MSDS Number:100000014172
3/11
Drill-Thin Thinner
Version 1.4
Advice on protection
against fire and explosion
Storage
Requirements for storage
areas and containers
a
A2
b
e
Basis
Value
Control parameters
Note
CAS-No.
Stannous Sulfate
7488-55-3
Crystalline Silica
14808-60-7
Control parameters
Immediately Dangerous to Life or Health
Concentration Value
100 milligram per cubic meter
Immediately Dangerous to Life or Health
Concentration Value
50 milligram per cubic meter
Update
1995-03-01
1995-03-01
Engineering measures
Adequate ventilation to control airborned concentrations below the exposure guidelines/limits.
MSDS Number:100000014172
4/11
Drill-Thin Thinner
Version 1.4
Consider the potential hazards of this material (see Section 2), applicable exposure limits, job
activities, and other substances in the work place when designing engineering controls and selecting
personal protective equipment. If engineering controls or work practices are not adequate to prevent
exposure to harmful levels of this material, the personal protective equipment listed below is
recommended. The user should read and understand all instructions and limitations supplied with
the equipment since protection is usually provided for a limited time or under certain circumstances.
Personal protective equipment
Respiratory protection
Hand protection
Eye protection
Eye wash bottle with pure water. Tightly fitting safety goggles.
Hygiene measures
: Solid
: Brown
: Odorless
Safety data
Flash point
: Not applicable
: Not applicable
: Not applicable
MSDS Number:100000014172
5/11
Drill-Thin Thinner
Version 1.4
Oxidizing properties
: no
Autoignition temperature
: No data available
Molecular formula
: Mixture
Molecular Weight
: No data available
pH
: No data available
Freezing point
: No data available
Pour point
No data available
: Not applicable
Vapor pressure
: Not applicable
Relative density
Water solubility
: Completely Soluble
: No data available
: Not applicable
Evaporation rate
: Not applicable
: Not applicable
Chemical stability
: No data available.
Materials to avoid
Other data
Drill-Thin Thinner
Acute oral toxicity
Drill-Thin Thinner
Version 1.4
Stannous Sulfate
:
Species: rabbit
Stannous Sulfate
Drill-Thin Thinner
Skin irritation
Drill-Thin Thinner
Eye irritation
: Eye irritation
Drill-Thin Thinner
Aspiration toxicity
Drill-Thin Thinner
Further information
: No data available.
Toxicity to fish
Methyl ester of sulfonated
tannin
Ferrous Sulfate
Ferrous Sulfate
Toxicity to algae
Methyl ester of sulfonated
tannin
MSDS Number:100000014172
: EL50: 79 mg/l
Exposure time: 72 h
Species: Desmodesmus subspicatus (green algae)
7/11
Drill-Thin Thinner
Version 1.4
Ferrous Sulfate
EL50: 45 mg/l
Exposure time: 72 h
Species: Skeletonema costatum (Marine Algae)
: Not applicable
Additional ecological
information
Contaminated packaging
8/11
Drill-Thin Thinner
Version 1.4
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 12 (40 CFR 61).
MSDS Number:100000014172
9/11
Drill-Thin Thinner
Version 1.4
US State Regulations
California Prop. 65
Ingredients
Notification status
Europe REACH
United States of America TSCA
Canada DSL
Australia AICS
New Zealand NZIoC
Japan ENCS
Korea KECI
Philippines PICCS
China IECSC
:
:
:
:
:
:
:
:
:
NFPA Classification
: Health Hazard: 1
Fire Hazard: 1
Reactivity Hazard: 0
1
1
Further information
Legacy MSDS Number
315030
Significant changes since the last version are highlighted in the margin. This version replaces all
previous versions.
The information in this MSDS pertains only to the product as shipped.
The information provided in this Material Safety Data Sheet is correct to the best of our
knowledge, information and belief at the date of its publication. The information given is designed
only as a guidance for safe handling, use, processing, storage, transportation, disposal and
release and is not to be considered a warranty or quality specification. The information relates
only to the specific material designated and may not be valid for such material used in
combination with any other materials or in any process, unless specified in the text.
Key or legend to abbreviations and acronyms used in the safety data sheet
ACGIH
American Conference of
MSDS Number:100000014172
LD50
10/11
Drill-Thin Thinner
Version 1.4
CNS
CAS
EC50
Effective Concentration
NOAEL
EC50
EGEST
NOEC
OSHA
GHS
>=
IC50
STEL
SARA
IARC
TLV
TWA
TSCA
UVCB
<=
WHMIS
LC50
AICS
DSL
NDSL
EOSCA
EINECS
MAK
IECSC
ENCS
KECI
MSDS Number:100000014172
LOAEL
NFPA
NIOSH
NTP
NZloC
PEL
PICCS
Philippines Inventory of
Commercial Chemical Substances
Presumed Not Toxic
PRNT
RCRA
11/11