You are on page 1of 8

TECHNICAL-BUILDING SOLUTIONS

Our retractable tribunes are designed and produced on customers request.


Trolleys allowing the opening operations realised with uprights and feet in 120x60x3 mm. closed profiles or
equivalent according to your carrying capacity needs.
Each trolley is provided with 4 wheels in polyamide with rolling bearings of 100 mm. of diameter, 40 mm. of
width. On customers request, we can supply some other types of wheels.
Wheels incorporated inside the foot profile by means of proper holes.
Each trolley is provided with a proper anti-skidding system realised with U profiles and anti-friction rolling
bearings. Control of parallelism obtained thanks to the trolley guides and to the guides placed under the
decks. In this manner parallelism is controlled both at the base and in height, obtaining thus one of the most
precise solutions existing nowadays on the market of know-how.
Each trolley is provided with an automatic locking/unlocking system for the opening and closing operations,
consisting in mechanical locking devices by gravity. This system also allows a partial opening at any levels.
As an option, it will be possible to install the wheels on special shock-absorbers which make the wheels enter
inside the trolley. This device allows a better charge distribution (not only on wheels but on the whole carrying
surface of the trolley), a better structure stability, avoiding thus any possibilities of damaging the flooring.
Metal surface isolated from the flooring by means of proper rubber.
Decks realised in fireproof and waterproof multi-layer wood (11 layers) covered with a phenolic film on both
sides, 18 mm. thick, anti-slip surface. On request, these wooden panels can be covered in rubber, aluminium,
linoleum or carpeted.
As an option, in case of big tribunes and tribunes composed of multiple modules, it will be possible to supply
motors with a proper encoder.
Control of each encoder carried out through PLC, a proper PC which analyses and controls the speed of each
motor automatically so to keep the average tolerance to grant parallelism on all modules during the opening
and closing operations.

Pag. 1

SIDE BARRIERS
Side barriers folding onto the trampling areas by means of a special folding bayonet device (optional)

Pag. 2

PARALLELISM
Double control of parallelism by means of rolling bearings placed on all levels and on the base trolleys

Pag. 3

LOCKING SYSTEM
Locking and unlocking system of each block of tribune for partial moving (optional)

Pag. 4

MOTORIZATION
Power-operated motorization with anti-trace wheels in rubber (optional)

Pag. 5

SPECIAL MECHANISM
Special shock-absorbers mechanism which make the wheels enter inside the trolly allowing a better charge
distribution, not only on wheels but on the whole carrying surface of the trolley (optional)

Pag. 6

You might also like