Professional Documents
Culture Documents
---------------------------SDCCH CHANGE(Stand-alone Dedicated Control Channel)--------------------------------------------------------------------------ACL: Alarm class Identifier: A1=CRITICAL,A2=MAYOR or A3=MINOR.
PL: Supervision period length in hours Numeral: 1-24,48,72.
RLVAP;
!Muestra los canales TCH alarmados (BLOC) en la BSC por cong
estion continua!
RLVAR:chtype=tch; !Dar reset a la supervision de alarmas de TCH!
RLVAR:chtype=sdcch; !Dar reset a la supervision de alarmas de SDCCH!
RLVLP;
!Muestra parametros ACL,PL y ESTATUS. INCLUDED/NOT I
NCLUDED!
RLVLE:CHTYPE=sdcch; !Detiene la supervision!
RLVLI:CHTYPE=SDCCH; !Activa la supervicion!
RLVLI:CELL=ri0007c,CHTYPE=TCH;
RLVLC:CHTYPE=SDCCH,PL=48,ACL=A3;
RLCFP:CELL=RO0034D&RO0034E;
RLSLP:cell=RO0034D&RO0034E;
ma SDCCH!
RLCCC:CELL=RO0034E,CHGR=0,SDCCH=2,TN=2&3;
RLSLE:CELL=JI0058F,SCTYPE=UL;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=SDCCH,LVA=8;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=FR,SPV=1,LVA=23;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=FR,SPV=2,LVA=23;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=FR,SPV=3,LVA=23;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=FR,SPV=5,LVA=23;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=HR,SPV=1,LVA=46;
RLSLC:CELL=JI0058F,SCTYPE=UL,CHTYPE=TCH,CHRATE=HR,SPV=3,LVA=46;
RLSLI:CELL=JI0058F,SCTYPE=UL;
RLSLE:CELL=JI0058F,SCTYPE=OL;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=SDCCH,LVA=15;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=FR,SPV=1,LVA=5;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=FR,SPV=2,LVA=5;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=FR,SPV=3,LVA=5;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=FR,SPV=5,LVA=5;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=HR,SPV=1,LVA=10;
RLSLC:CELL=JI0058F,SCTYPE=OL,CHTYPE=TCH,CHRATE=HR,SPV=3,LVA=10;
RLSLI:CELL=JI0058F,SCTYPE=OL;
RLSLC:CELL=ms0031f,SCTYPE=oL,CHTYPE=cbch,LVA=1;
RLSLC:CELL=as0006f,SCTYPE=ol,CHTYPE=bcch,LVA=1;
-----------------------------CHEQUEO DE UNA CELDA--------------------------------------------------------------------------------------RXMOP:MOTY=RXOTRX;
----VER EL TG(Transceiver Group) DEL SITIO:
rxtcp:moty=rxotg,cell=ES0009A;
----MUESTRA LOS ID DE LAS CELDAS ASOCIADAS A ESE TG:
rxtcp:mo=rxotg-83;
rxasp:mo=rxotg-83; !Alarma situation!
----MUESTRA EL ESTADO DEL E1 (OPERATIVO O DESACTIVADO):
RXMSP:MO=RXOTG-83;
----MUESTRA EL ESTADO DE LOS TS DE CADA RADIO (OPERATIVO O BLOQUEADO):
rxmsp:mo=rxotg-83, subord;
----MUESTRA TODAS LAS ALARMAS INTERNAS DE UNA BSC:
rxasp:moty=rxotg;
----MUESTRA LAS ALARMAS QUE HAYAN EN LA RBS:
rxmfp:mo=rxotg-83,SUBORD,FAULTY;
RXMFP:MOTY=RXOCF,faulty;
!TODAS LAS ALARMAS DE LAS CELDAS EN LA BSC!
RXAPP:MO=RXOTG-83;
RXCDP:MO=RXOTG-83;
RXMOP:MO=RXOTG-83,SUBORD;
para saber si el radio es EDGE-----------------------------------------------------------------------------------------------------------------------------------------rxmfp:mo=rxotrx-83-0&&-9;
DEVICE STATE DETAILS
STDEP:DEV=RBLT2-2625&&-2655;
---------------------SECUENCIA DE COMANDOS PARA INCREMENTAR CAPACIDAD DE CANALES
DEDICADOS A GPRS------------Si el medio de Tx es por IP, entonces basta solo agregar la cantidad de numreqeg
prsbpc directamente.
rxtcp:moty=rxotg,cell=ES0009B;
rxtcp:mo=rxotg-82;
rxapp:mo=rxotg-82;
rxape:mo=rxotg-82,dcp=40&&55;
rxapi:mo=rxotg-82,dcp=40&&55,dev=RBLT2-2952&&-2967,res64k;
rlbdc:cell=ES0009B,chgr=0,NUMREQEGPRSBPC=4;
rlbdp:cell=ES0009B;
rxasp:mo=rxotg-82; !Alarma situation!
rlcrp:cell=ES0009B;
rxcdp:mo=rxotg-82;
rxmsp:mo=rxotg-82, subord;
----MUESTRA LOS dTRUs QUE TIENE EL SITIO Y A QUE SECTOR, BANDA Y POTENCIA MPWR E
STA ASIGNADO A CADA RADIO:
rxmop:mo=rxotx-248-0&-1&-2&-3&-4&-5;
rxmop:mo=rxotx-248-4&-5&-6&-7;
rxmop:mo=rxotx-82-8&-9;
----MUESTRA LAS CANTIDAD DE ANTENAS INSTALADAS PARA CADA RAMA DE FEEDERS POR SEC
TOR:
rxmop:mo=rxorx-82-0&-1&-2&-3;
rxmop:mo=rxorx-82-4&-5&-6&-7;
rxmop:mo=rxorx-82-8&-9;
rxmop:mo=RXOTRX-82-0&&-3;
rxmop:mo=RXOTRX-82-4&&-7;
rxmop:mo=RXOTRX-82-8&&-9;
----MUESTRA A QUE SITIO PERTENECE ESE E1 Y LAS ALARMAS DEL E1:
rxasp:mo=rxotg-82;
RXMSP:MO=RXOTS-82-11-0&&-7;
!ESTATUS DE LOS TS EN EL RADIO!
----MUESTRA LAS ALARMA DE CADA TG EN UNA BSC:
RXMFP:MOTY=RXOCF,faulty;
----MUESTRA LOS TG DE LAS RBS EN LA BSC:
RXTCP:MOTY=RXOTG;
!IMFI!
rlcrp:cell=mn0049d;
rlcrp:cell=mn0049a,detail;
----DISTRIBUCION DE BCCH, HOPPING, SDCCH, TCH EN LOS TS DE CADA RADIOS y TFMODE=
SLAVE o MASTER:
rxcdp:mo=rxotg-23;
----------------------------MUESTRA PARAMETRO TSC----------------------------------------------SE DEBE HALTEAR EL CHGR DE INTERES PARA EJECUTAR EL CAMBION DEL TSC Y LUEGO ACTI
VARLO NUEVAMENTE.
RLDEP:CELL=mn0068a;
RLDTP:CELL=mn0068a;
RLSTC:CELL=ca0003a,CHGR=0,STATE=HALTED;
RLDTC:CELL=ca0003a,CHGR=2,TSC=7;
RLSTC:CELL=ca0003a,CHGR=0,STATE=ACTIVE;
RLSTP:CELL=ca0003a;
----------------------------CAMBIO DHASS=ON/OFF----------------------------------------------------------------------------DHASS is used to turn the signal strength check for DHA and the DHA part of Abis
Triggered
HR Allocation ON or OFF. The parameter is set per cell.
RLCSP:CELL=mn0009d;
RLCSC:CELL=as0022f,DHASSTHRASS=96,DHASSTHRHO=98,DHASS=ON;
rlcsc:cell=as0009d,dhass=on;
----------------------------CAMBIO DE AMR------------------------------------------------RLDHP:CELL=mn0007d;
RLDHC:CELL=mn0111b,
RLDHC:CELL=ca0010f,
RLDHC:CELL=mn0303c,
dha=on;
dthamr=70;
dthnamr=15;
RLDHC:CELL=SJ0002F, DTHAMR=95,DHPRL=1&&15;
2E)!
RXMOP:MOTY=RXOTRX;
!PRINT LOS DCP DE TODA LA BSC!
RXTCP:MOTY=RXOTG,CELL=gr0001d;
rxmop:mo=RXOTRX-82-0&&-4;
RXMOC:MO=RXOTRX-212-0,DCP1=178,DCP2=179&&186,TEI=0; !PARA ASIGNAR LOS DCP!
RLBDP:CELL=ca0017f;
RLGSP:CELL=mt0005b;
RLGRP:CEll=mt0015c;
!MUESTRA EL TRAFICO DE DATOS Y CANT DE CANALES (FIJOS/E
NDEMANDA)OCUPADOS!
RLGSC:CELL=ca0017d,FPDCH=5;
RLCRP:CELL=mt0003a;
rxtcp:moty=rxotg,cell=ca0017d; !MUESTRA EL TG!
rxapp:mo=rxotg-155;
!MUESTRA RECURSOS DE LA CELDA Y SI TIENE RECURSO
S LIBRE PARA AMPLIAR NUMREQEGPRSBPC!
rlcrp:cell=ri0037d;
RLDGP:CELL=ri0037f;
!MUESTRA LA ASIGNACION DE LOS CHGR POR CAPA Y BANDA!
RLGSP:CELL=mn0004a;
RLGSC:CELL=mn0004a,pdchpreempt=8,primplim=8,flexhighgprs=0,chcsdl=cs2;
RLBDC:CELL=NS0001B,CHGR=0,TN7BCCH=EGPRS,EACPREF=YES;
RLDGC:CELL=ro0003a,chgr=0,sctype=ol;
RLGQC:CELL=mn0287b,STREAMSUP=YES,EITEXCLUDED=2;
RLGQC:CELL=ca0017e,STREAMSUP=YES,BPDCHBR=8,GPDCHBR=16,EPDCHBR=32;
!PDCHPREEMPT
(Packet Data Channels (PDCHs) preemptability)!
This parameter indicates which on-demand PDCHs are possible to preempt to be use
d for circuit switched calls. The availability of
this parameter depends on commercial agreements relating to optional feature Fle
xible Priority Handling of PDCH.
0: All on-demand PDCHs are possible to preempt.
1: On-demand PDCHs not used for Dual Transfer Mode (DTM) are possible to preempt
.
2: On-demand PDCHs not used for Streaming are possible to preempt.
3: On-demand PDCHs not used for DTM nor for Streaming are possible to preempt.
4: On-demand PDCHs that are not essential are possible to preempt.
5: On-demand PDCHs that are not essential nor DTM PDCHs are possible to preempt.
6: On-demand PDCHs that are not essential nor Streaming PDCHs are possible to pr
eempt.
7: On-demand PDCHs that are not essential nor DTM nor Streaming PDCHs are possib
le to preempt.
8: Idle on-demand PDCHs are possible to preempt.
!FLEXHIGHGPRS (Abis resource allocation handling for EGPRS capable channels)!
This parameter indicates how to handle Abis resource allocation on Enhanced GPRS
(EGPRS) capable
channels with flexibly allocated Abis path for non-EGPRS capable Mobile Stations
(MSs).
0: 64k resources is not allocated.
1: 64k resources is allocated when available.
!PRIMPLIM (Primary PDCH Set (PSET) limit)!
This parameter ind
icates the
maximum number of GPRS dedicated and semi-dedicated channels allowed in the pri
mary PSET.
Numeral 1 - 8
---------------------SECUENCIA DE COMANDOS PARA INCREMENTAR CAPACIDAD DE CANALES
DEDICADOS A GPRS------------Si el medio de Tx es por IP, entonces basta solo agregar la cantidad de numreqeg
prsbpc directamente.
rxtcp:moty=rxotg,cell=ES0009B;
rxtcp:mo=rxotg-82;
rxapp:mo=rxotg-82;
rxape:mo=rxotg-82,dcp=1&&3;
rxapi:mo=rxotg-82,dcp=1&&3,dev=RBLT2-2625&RBLT2-2626&RBLT2-2627,res64k;
rxapi:mo=rxotg-82,dcp=46&&48,dev=RBLT2-7758&RBLT2-7759&RBLT2-7760;
rlbdc:cell=ca0017d,chgr=1,NUMREQEGPRSBPC=2;
rlbdp:cell=mt0007f;
rxasp:mo=rxotg-82; !Alarma situation!
rlcrp:cell=ca0003d;
rxcdp:mo=rxotg-155;
rxmsp:mo=rxotg-27, subord;
-------------PROCEDIMIENTO PARA REASIGNAR LOS CANALES EN 64K a ONDEMAND (TCH_VOZ
)------------RXAPP: MO=RXOTG-48;
!Imprimo Configuracin de la trama de Recursos de vos y Dat
os!
RXAPE: MO=RXOTG-48,DCP=36; !Retiro de la trama los dispositivos del E1 desde el
14 hasta el 18!
RXAPI: MO=RXOTG-48,DCP=36,DEV= RBLT-1572; !Los asigno nuevamente, esta vez solo
para el servicio de voz!
RXAPP: MO=RXOTG-48;
!Imprimo Configuracin de la trama de Recursos de vos y Dat
os!
------------------------RESET A LOS RP---------------------------------------------RP: Regional Processor
BLRPI:RP=422,FORCED;
!BLOQUEA EL RP!
BLRPE:RP=422;
!DESBLOQUEA EL RP!
DIRRP:RP=422;
!Printout of the RF event log !
DIRRP:RP=422,COM;
!Printout of the event log of RP and the system
global event log!
DIRRP:RP=ALL;
!Printout of the event log of all existing RPs and the s
ystem global event log!
--------------------------HALTED-ACTIVE CELL------------------------------------------------------------------------------------rlstp:cell=mn0283a&mn0283b;
rlstc:cell=mn0283a, chgr=all,state=halted;
rlstc:cell=mn0283b, chgr=all,state=active;
--------------------------MAXTA-TALIM--------------------------------------------------------------------------------------------(Condicion para el DropCall una vez que el movil supero su umbral=63TA)
RLLDP:CELL=mn0068a;
RLLDC:CELL=ca0003f, MAXTA=63;
RLLDC:CELL=gr0018a, RLINKUP=32;
(Condicion de urgencia para que la BSC busque y force el HO de la llamada con un
a vecina antes del DropCall. Su umbral=62)
RLLUP:CELL=mn0068a;
RLLUC:CELL=ca0003f, TALIM=62;
-------------------------CAMBIO DE ACCMIN Y CRH PARA MINIZAR LOCATION AREA UPDAT
E EN BORDE DE LA CELDA---------------------------------------------------RLSSP:cell=ro0052d;
RLSSC:CELL=ro0052d, ACCMIN=102;
RLSSC:cell=ro0052d, CRH=;
RLSSC:CELL=mn0191b,NCCPERM=0&1&2&3&4&5&6&7;
RLSSC:CELL=MT0065E,CCHPWR=23,CRH=10,DTXU=2;
RLSSC:CELL=gr0018a, NCCPERM=0&1&2&3&4&5&6&7,RLINKT=20,RLINKTAFR=22,RLINKTAHR=22;
rlssc:cell=ri0025e,dtxu=1;
-------------------------CAMBIAR POTENCIAS BSPWR/BSTPWR_BSPWRT/BSPWRB-----------------------------------------------------------------------BSPWR: Base Station ERP(Effective Radiated Power) power for BCCH frequency.
BSTXPWR: Base Station ERP power for non-BCCH frequency.
BSPWRB: Base Station (BS) output power in dBm, for Broadcast Control Channel (B
CCH) Radio Frequency (RF) channel number.
BSPWRT: BS output power in dBm, for non-BCCH RF channel numbers.
rllop:CELL=AN0004B;
rlloc:cell=AN0004E,SCTYPE=ALL,bspwr=39,bstxpwr=39;
rlloc:cell=AN0004E,bspwr=39,bstxpwr=39; !CELDA EXTERNA!
rlcpp:cell=AN0004B;
rlcpc:cell=AN0004E,bspwrb=39;
rlcpc:cell=AN0004E,bspwrt=39, sctype=all;
rlcpc:cell=ES0048D,MSTXPWR=33, sctype=all;
rlcpc:cell=ES0048E,MSTXPWR=33, sctype=all;
rlcpc:cell=ES0048F,MSTXPWR=33, sctype=all;
-------------------------CAMBIO DE CRO y T3212-----------------------------------------------------------------------------------------CRO:
0 (0dB)
1 (2dB)
2 (4dB)
.
.
63(126dB)
RLSBP:CELL=AN0004D&AN0004E&AN0004F;
RLSBC:CELL=AN0058F,CRO=0;
RLSBC:CELL=mt0049d,MAXRET=4,TX=32,PT=0,TO=0;
RLSBC:CELL=MT0065E,T3212=6;
***T3212 time-out value***
This parameter indicates the time-out value, Es el intervalo de tiempo que usa l
a BSC para monitorear la ubicacion del MS, y asi actualizar
su tabla de Location Area Update para el HLR. Asi cuando la BSC busque al MS par
a establecer un llamada lo pueda encontrar y no se genere un Drop
de sdcch. A este proceso se le llama PAGING. Alta utilizacion de PAGING afecta l
a accesibilidad de una BSC. La congestion de PAGIN depende de la
cantidad de LACs que haya en la red.
0: Infinite time-out
1: 0.1 hours
2: 0.2 hours
3: 0.3 hours
.
.
255: 25.5 hours
--------------------------CAMBIO DE LAYERTHR--------------------------------------------------------------------------------RLLHC:CELL=MN0017A,LAYER=1,LAYERTHR=20,LAYERHYST=30,PSSTEMP=17,PTIMTEMP=40;
RLLHP:CELL=AN0004B&AN0004E;
RLLHC:CELL=AN0058F, layerthr=85;
rllhc:cell=ro0046b,layer=2;
-------------------------RADIO CONTROL CELL, LOCATIONG HIERARCHICAL DATA, CHANGE
-----------------------------------HCS threshold is the minimum required SS for the cell to be in HCS ranking list.
handover in threshold
0
handover out threshold
100
threshold: control coverage
in: control congestion/traffic
out: control handover
%
%
RLLCP:CELL=mt0007c&mt0007f;
RLLCI:CELL=mt0007c;
RLLCE:CELL=CH0033C;
RLLCC:CELL=ca0019b,CLSLEVEL=25,CLSACC=44,HOCLSACC=ON;
RLLCC:CELL=mt0007d,CLSLEVEL=13,CLSACC=22,HOCLSACC=ON;
RLLCC:CELL=ca0003c,CLSLEVEL=20,CLSACC=40,HOCLSACC=ON;
RLLCC:CELL=ca0003f,CLSLEVEL=20,CLSACC=40,HOCLSACC=ON;
!VALORES CDD!
!VALORES CDD!
RLIHC:CELL=
;
RLIHC:CELL=
;
RLIHC:CELL=
;
RLIHC:CELL=
;
RLIHC:CELL=
;
RLIHC:CELL=
;
RLIHC:CELL=
;
mn0048a,
SCTYPE=ALL,
SSOFFSETDLAFRP =
mn0048a,
SCTYPE=ALL,
QOFFSETULAFRP
10
mn0048a,
SCTYPE=ALL,
QOFFSETULAFRN
mn0048a,
SCTYPE=ALL,
QOFFSETDLAFRP
10
mn0048a,
SCTYPE=ALL,
QOFFSETDLAFRP
mn0048a,
SCTYPE=ALL,
QOFFSETULN
10
mn0048a,
SCTYPE=ALL,
QOFFSETDLN
--RLCFP:CELL=mn0085d;
RLCFI:CELL=mn0085d,CHGR=1,DCHNO=222;
RLCFE:CELL=mn0085d,CHGR=1,DCHNO=228;
rlncp:cell=mn0162e;
RLACP:CELL=ns0005a&ns0005b&ns0005c;
----------------------CHEQUEO DE INCONSISTENCIAS:----------------------------------------------------------------------------rlstp:cell=ri0025e;
rldep:cell=ri0025e;
rlmfp:cell=ri0025e;
rlncp:cell=ri0025e;
rlhpp:cell=ri0025e;
rlcfp:cell=ri0025e;
rlbdp:cell=ri0025e;
rlchp:cell=ri0025e;
rlcrp:cell=ri0025e;
rllop:cell=ri0025e;
rlcpp:cell=ri0025e;
rlgsp:cell=ri0025e;
rlgrp:cell=ri0025e;
rldtp:cell=ri0025e;
rlihp:cell=ri0025e;
rlssp:cell=ri0025e;
rlsbp:cell=ri0025e;
rlimp:cell=ri0025e;
rlnrp:cell=ri0025e,cellr=all;
---------------------DESBLOQUEO--------------------------------------------------------------------------------RXESI:MO=RXOTS-TG-TRX-TS;
RXBLE:MO=RXOTS-TG-TRX-TS;
---------------------CONFIGURACION DE TRANSCODERS--------------------------------------------------------------------------RRTPP:TRAPOOL=ALL;
rrmap:trapool=all,detailed; !Muestra alarmas en los transcoders device!
---------------------PARA SABER No.TRXs en un BSC--------------------------------------------------------------------------saaep:sae=1153;
---------------------PARA VER LOS APNs HABILITADOS EN UN NUMERO CELULAR-----------------------------------------------(COMMAND HANDLING)
HGSDP:MSISDN=50588528627,ALL;
HGAPP:APNID=ALL;
---------------------PARA SABER LA VELOCIDAD DE CONEXION DEL APN----------------------------------------------------NGEQP:EQOSID=4095;
---------------------COMANDOS DE MSC-------------------------------------rcortez@mas1o> eaw MSSSE01
mgcep:cell=all;
!MUESTRA LOS DATOS CGI!
mgocp:cell=all;
!MUESTRA LAS CELDAS EXTERNAS EN LA MSC!
MGOCI:CELL=ba0020d,CGI=710-21-43-10707,MSC=MSSES01;
MGOCI:CELL=ba0020e,CGI=710-21-43-20707,MSC=MSSES01;
MGOCI:CELL=ba0034D,CGI=710-21-471-10535,MSC=MSSVF01;
MGOCI:CELL=ba0034E,CGI=710-21-471-20535,MSC=MSSES01;
mglap;
!MT LOCATION AREA DATA!
mgbsp:bsc=all;
!MT BASE STATION CONTROLLER DATA!
mgcap;
!MT OWN CALLING ADDRESS DATA!
quit
--------------------CREAR UNA CELDA O CAMBIAR EL VALOR DEL CGI EN LA CENTRAL MSC
---------------------Se elimina la celda con el cgi actual malo y luego se crea la misma celda con en
nuevo cgi.
MGCEP:CELL=ba0020d;
MGCEE:CELL=ca0004e;
MGCEI:CELL=ba0020d,CGI=710-21-43-10707,BSC=BSCVF01;
--------------------OBTENER TIPO DE GABINETE DE LAS RBS DE TODA LA RED--------------------------bsm_hw_export -a rulogicalid
TODA LA RED!
rrsgi
rrsgp
rxmop print data TG
RXMOP:MOTY=RXOTRX;
para saber si el radio es EDGE-----------------------------------------------------------------------------------------------------------------------------------------rxmfp:mo=rxotrx-83-0&&-9;
RXTCP:CELL=mn0016d,MOTY=RXOTG;
rxmfp:mo=rxocf-243,SUBORD,FAULTY;
rlcrp:cell=ES0002A;
RXTCP:CELL=mn0020d,MOTY=RXOTG;
rxmop:mo=rxotg-82,SUBORD;
rxmop:mo=rxotf-220;