Professional Documents
Culture Documents
Revision 1
0-2
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory,
The following paragraph does not apply to any countries where such provisions are
installation, maintenance, and repair of products. This manual covers all localities where the
products are sold. For this reason, there may be information in this manual that does not
apply to your locality.
Trademarks
The product names and company names used in this manual are the registered trademarks
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements
or changes in products. When changes occur in applica0-1le products or in the contents of
Copyright
this manual, Canon will release technical information as the need arises. In the event of major
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
changes in the contents of this manual over a long or short period, Canon will issue a new
not be copied, reproduced or translated into another language, in whole or in part, without the
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential
information.
0-2
0-3
Contents
Specifications
Specifications-------------------------------------------------------------------1-2
Functions
Basic Function------------------------------------------------------------------2-2
FTP Printing-------------------------------------------------------------------------- 2-2
Up to 50 mm of Gutter------------------------------------------------------------Print Pause--------------------------------------------------------------------------Format Settings--------------------------------------------------------------------Staple & Group---------------------------------------------------------------------Custom Paper Size Settings Unit(Millimeter-Inch)------------------------IPPS Print ----------------------------------------------------------------------------
2-5
2-5
2-6
2-7
2-7
2-8
Trapping------------------------------------------------------------------------------2-13
Setting Procedure--------------------------------------------------------------------------2-13
Service Mode UI----------------------------------------------------------------------------2-13
Combination of Trapping and other functions---------------------------------------2-14
Restrictions-----------------------------------------------------------------------------------2-14
Kyuanos------------------------------------------------------------------------------2-15
Matching Mode: Setting [Kyuanos] of Driver----------------------------------------2-15
Setting [Kyuanos] of User Mode--------------------------------------------------------2-16
Installation
Installation Procedure---------------------------------------------------------3-2
Maintenance
Related Service Mode--------------------------------------------------------4-2
Invalidating the License for Transfer to a Different Device (Level 2)--- 4-2
#853-------------------------------------------------------------------------------4-5
Imaging(error)-------------------------------------------------------------------4-6
Initialization error ------------------------------------------------------------------- 4-6
0-3
0-4
Work Memory full ------------------------------------------------------------------ 4-6
Invalid data -------------------------------------------------------------------------- 4-6
Processing error -------------------------------------------------------------------- 4-6
0-4
0-5
The following rules apply throughout this Service Manual:
Explanation of Symbols
The following symbols are used throughout this Service Manual.
Symbols
1. Each chapter contains sections explaining the purpose of specific functions and the
Explanation
relationship between electrical and mechanical systems with reference to the timing of
Using it for general attention, warning, a notice of the danger that does not specify.
operation.
In the diagrams,
represents the path of mechanical drive; where a signal name
accompanies the symbol, the arrow
indicates the direction of the electric signal.
The expression "turn on the power" means flipping on the power switch, closing the front
Using the possibility of the electric shock for notice to be careful to.
door, and closing the delivery unit door, which results in supplying the machine with power.
2.In the digital circuits, '1' is used to indicate that the voltage level of a given signal is "High",
Mention about written item in the copier BASIC series to understand mention
contents.
while '0' is used to indicate "Low". (The voltage value, however, differs from circuit to
circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on
T-0-1
when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked in
the field. Therefore, the operations of the microprocessors used in the machines are not
discussed: they are explained in terms of from sensors to the input of the DC controller
PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service
Manual and all relevant Service Information bulletins and be able to identify and isolate faults
in the machine.
0-5
Specifications
Specifications
Specifications
1-2
Specifications
The Direct Print from Web browser becomes enabled when PS Unit is connected.
Attention:
PS Print kit and the Direct Print Kit(for PDF) of the exclusion is related.
The installation back cannot install a Direct Print Kit(for PDF) with PS Print kit.
Since every printer accessory is a license accessory, it is necessary to follow the LMS
instructions, obtain the number of license information, and enter it into the host machine.
Direct
Print
(XPS)
Direct
Print
(PDF)
PS
PS Direct
UFR II
NW-SCAN
TIFF, Jpeg
PCL
BarDIMM
F-1-1
UFR II,
Direct Print Kit PS Printer Kit Direct Print Kit
PCL Printer Kit
XPS
PDF
RUI
File TIFF(JPEG)
PDF
XPS
PS
Web browser File TIFF(JPEG)
content print
PDF
XPS
OK
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OK
N/A
N/A
N/A
N/A
N/A
OK
N/A
OK
N/A
N/A
OK
N/A
OK
N/A
N/A
N/A
OK
N/A
T-1-1
1-2
Specifications > Specifications > License configuration of the printer option > How to confirm the activated printer option license:
Replacement of BOOT ROM is not required for addition of the printer option.
Ex.2
The host machine A is a copier-only machine. The UFR II option was purchased to register
the license information.
1-3
Required function
UFR II
UFR II + PCL
UFR II + PCL + PS
Want to change the host machine B to a printer model by transfer inactivation of UFR II
license in the host machine A.
->In this case, as there is a transfer inactivation information in the host machine A, the license
T-1-2
In order to use UFR II, PCL, the memory capacity must be SOC:1025MB.
In order to use PS the memory capacity must be SOC:1536MB.
[Invalidating the License for Transfer to a Different Device] can only license option.
Ex.1
The host machine A is the one which employs UFR II as a standard.
The newly-purchased host machine B is a copier-only one.
Want to change the host machine B to a printer model by transfer inactivation of UFR II
Specifications > Specifications > License configuration of the printer option > How to confirm the activated printer option license:
1-3
Specifications > Specifications > PCL Printer Driver > Effective print area of PCL
1-4
Paper Size:
Paper Name
Width(mm)
length(mm)
A3
B4
A4
B5
297.0
257.0
210.0
182.0
420.0
364.0
297.0
257.0
A5
11 x 17
LEGAL
LETTER
Statement
EXECUTIVE
12 x 18
SRA3
Envelope Monarch
Envelope DL
Envelope C5
Envelope B5
Custom Paper Size Minimum
148.0
279.4
215.9
215.9
139.7
184.2
304.8
320.0
98.4
110.0
162.0
176.0
210.0
431.8
355.6
279.4
215.9
266.7
457.2
450.0
190.5
220.0
229.0
250.0
PCL5
HP-GL/2 Mode
Texts are handled in the PCL mode, or in the HP-GL/2 mode if:
1.Characters are clipped.
2.Characters are rotated.
Supported typefaces include:
1. Standard
2. Italic
3. Bold
4. Bold Italic
Raster Mode
Use of a device font is determined by the driver setting.
99.0 x 139.7
320.0 x 1200.0
If a device font is used, the Raster Mode will handle data the same as the HP-GL/2 Mode.
If not, the following restrictions will be imposed.
T-1-4
*GDI Raster Fonts unavailable 1 byte fonts such as Courier, MS Sans Serif, MS Serif, etc.
*GDI Vector Fonts available 1 byte fonts such as Modern, Roman, Script, etc.
*TrueType Fonts available
Roman, etc.
NOTE:
GDI Vector Fonts and TrueType Fonts become available only after added to Windows.
Main scaning
Custom Size
Minimum
Custom Size
Maximum
SRA3
12x18
Sub scaning
Main scaning
Sub scaning
90.53
131.53
4.23
4.23
*305.00
448.73
7.50
4.23
*305.00
296.33
441.53
448.73
7.50
4.23
4.23
4.23
T-1-5
* : out of a guarantee
The printable area of the host machine is shown.
The host machine print guarantee area narrows more than this.
Specifications > Specifications > PCL Printer Driver > Effective print area of PCL
1-4
Specifications > Specifications > PCL Printer Driver > Supported operating systems
1-5
Data prossessing
PCL 5c 600dpi
PCL 6 600/1200dpi
Specifications > Specifications > PCL Printer Driver > Supported operating systems
1-5
Functions
Functions
Function
Basic
Function
New
Functions > Basic Function > FTP Printing > Number of Connections and Used Ports
Basic Function
2-2
This function is featured mainly to print prn files output from PDL drivers. The device
processes text files and the like as it receives data in LPR (and does not properly print
depending on settings.) The device of PostScript-compatible model can print PDF files.
FTP Printing
The following shows a command specification example, which you will connect the device of
This device provides a FTP server for receiving print data. The device can accept print jobs
sent in FTP from client PCs. This is called FTP printing, a new feature first employed on iRC
6800. To use this feature, the FTP Print option must be selected. It is selected by default.
You can access the option by pressing Ad Func, System Settings, Network Settings, TCP/
IP Settings, and FTP Print Settings buttons. In FTP Print Settings screen, only one pair of a
user name and password can be entered for the user who can log in to the FTP server. No
settings are made for both of the fields by default.
the IP address "172.16.181.131" in FTP with the user name "test" and the password "test"
and print the file "test.prn" in the root directory of the drive C on the client PC.
C:\>ftp 172.16.181.131
Connected to 172.16.181.131.
220 Connection established.
User (172.16.181.131:(none)): test
331 Password required to login.
Password: Note: The password is not displayed.
230 User test logged in.
ftp> bin
200 Type set to IMAGE (binary).
ftp> put c:\test.prn
200 PORT command successful.
150 Opened BINARY data connection for file transfe
226 Transfer complete.
ftp: 15871 bytes sent in 0.00Seconds 15871000.00Kb
ftp> bye
221 Server closing down connection.
F-2-1
Commands
The FTP server complies with the RFC 959 -- File Transfer Protocol -- but provides only
printing function. Thus the server does not support other functions required as a RFC 959
compliant server. The commands available for the FTP client are "user," "password," "bin,"
"put," "bye," "hash," and "help." There is no use of other commands since the server does
not provide functions other than printing. The following lists the notes to use the commands.
To send print data with the command "put," set the mode to the binary mode using the
command "bin." In the ascii mode, the data cannot be sent with the command "put."
If the user and password fields are blank, any user with any password can log in. If the
C:\>
user name "anonymous" is used, any character string can be entered as the password.
The device displays the string in User filed of Log screen.
Functions > Basic Function > FTP Printing > Number of Connections and Used Ports
2-2
Functions > Basic Function > Secured Print Jobs > Overview:
2-3
by operating from the status screen of the print job. Regarding these operations, the device
side does not distinguish from operations of the normal PDL job. That is, the password entry
is required only when the job is output. If you interrupt or restart the job during outputting, the
password setting and matching are not conducted.
f) Automatically delete of Secured Print Jobs
When Secured Print Job is continuing being suspended for a long time, apparatus deletes a
job automatically.
There are options for automatic job deletion time -- 1, 2, 3, 6, 12, and 24 hours. With a view of
security and memory usage, no option longer than 1 day is available. The elapsed time starts
after all the processes for the PDL data and the rendering for all the image data, for which
Secured Print is specified, are finished.
g) Specifications and Limitations on Secured Print Jobs
The limitations on Secured Print jobs are listed as follows.
Once data of a Secured Print job is printed, it is immediately deleted and cannot be printed
any more.
If the power for the controller is shut down, unprinted data of a Secured Print job is deleted
from the printer.
All the job information, represented by the paper source and output information, information
of the number of copies, and finishing information, cannot be changed on the printer.
If the entire raster information for a Secured Print job cannot be stored in the image server
(hard disk drive) due to insufficient memory, the job results in an error, to be deleted.
Up to 50 Secured Print jobs of image data being rendered and left unprinted can be stored.
priority means that if the jobs can be changed in priority order, the Secured Print job can
be prioritized. This job is proceeded according to all job information specified by the printer
driver, etc., such as paper supply/output, the number of copies and finishing information.
When the processing is completed and all documents are output, the documents and job
information stored in the image server are deleted.
e) Operations for Secured Print jobs
Like other print jobs, Secured Print jobs can be deleted, interrupted, restarted and promoted
Functions > Basic Function > Secured Print Jobs > Overview:
2-3
Functions > Basic Function > Secured Print Jobs > Overview:
2-4
F-2-2
F-2-3
F-2-4
Functions > Basic Function > Secured Print Jobs > Overview:
2-4
2-5
Up to 50 mm of Gutter
Up to 50 mm of the gutter can be specified. The gutter can be adjusted within a range from 0
mm to 50 mm in 1 mm increments. The local UI and the print driver have the controls for the
gutter settings.
The image is shifted to the width value specified for gutter, making a margin. If the shift
causes the image to overflow from the printable area, the overflowing area is missing from
the print results. The overflowing image will not be reduced to fit into the printable area.
F-2-6
F-2-5
Print Pause
You can suspend ongoing printing of all jobs from the control panel. Likewise, you can
resume the printing working from the control panel. There will be no suspension of data input
for the network or PDL processing. To enable Print Pause, use the following service mode:
COPIER>OPTION>USER>PR-PSESW
0: disable (do not indicate)
1: enable (indicate)
(default: '1')
2-5
2-6
Format Settings
A function to enable the selection of the following will be added in regard to the text used to
print the result of a job and the following notations to the lead or trail edge: Print Date, Print
User Name, Print Page Number:
Font
Style
Size
Color
A change made to Format Settings will affect the following in common, and individual
selection will not be possible: Print Date, Print User Name, Print Page Number.
F-2-8
F-2-7
F-2-9
2-6
Functions > Basic Function > Custom Paper Size Settings Unit(Millimeter-Inch)
2-7
You can use it to enable the selection of stapling when printing in Group mode. Staple &
Paper size was displayed in millimeter or inch depending on the destinations concerning the
custom paper size settings. The printer driver enables users to select the unit (Millimeter or
Inch).
F-2-11
F-2-10
If 'Store' is selected as 'Output Method' on the Finishing tab, [Staple & Group] will be grayed
out, not permitting selection.
If 'Store' is selected as 'Output Method' while selecting [Staple & Group], a switchover will
take place for [Finishing] so that [Staple & Group] will be [Collate].
Functions > Basic Function > Custom Paper Size Settings Unit(Millimeter-Inch)
2-7
Functions > Basic Function > IPPS Print > Setup example of printer's property:
2-8
IPPS Print
There is a security risk in the current IPP (Internet Printing Protocol), as the print data to be
sent on the Internet is not encrypted. In IPPS, the data is encrypted by SSL (Secure Sockets
Layer) and the reliability is enhanced.
Supported OS:
Windows 2000 / Windows XP / Windows2003 Server / Windows Vista / Windows 7
Restrictions
It is impossible to use IPPS and IPP together.
When User Mode > Top > Preferences > Network > TCP/IP Settings > IPv4 Settings > Use
IPv4 is set to 'ON', printing is available only from the PC with valid address.
F-2-13
How to setup:
Press the button of Start > Control Panel > Hardware and Sound > Add a printer. Select 'Add
In User Mode > Top > Preferences > Network > TCP/IP Settings > IPP Print Settings and set
a network, wireless or Bluetooth printer' and press the Next button. Select 'The printer that I
F-2-12
In the case of IPPS print from Windows Vista, the Common Name should be the IP address
of the host machine when generating SSL key.
User Mode > Top > Management Settings > Device Management > Certificate Settings >
Generate Network Communication key
Functions > Basic Function > IPPS Print > Setup example of printer's property:
F-2-14
2-8
2-9
Advanced Smoothing
This model adopts 'Advanced Smoothing' as the smoothing method instead of current
'Supper Smoothing'.
F-2-16
How to setup:
Printer settings-> Quality -> Advanced Settings -> image compression:image priority,
standard, speed priority
F-2-15
How to setup:
Printer Default
Quality>Detailed Settings
Image Priority
Standard
Printer Default
Speed Priority
Off
Smooth1
Smooth2
Image Compression
The PDL data sent to the iR C host machine from the printer driver on the PC is converted
into the image data by page and stored in HDD.
At this time, the images are compressed so as to shorten the internal processing time.
The high compression ratio enables the rapid processing, as the higher the data compression
ratio the lighter the amount of load for processing.
The low compression ratio enables the reproduction close to the original.
This compression method can be selected from the printer driver.
2-9
2-10
F-2-18
F-2-17
How to setup:
Quality>Advaced Settings>Density Fine Adjustment
Use Creep[Displacement]Correction
This function enables that the images on all pages are rendered in a certain distance from the
side edge by means of shifting the amount of margin (set by paper type) in each page at the
time of bookbinding and cutting unnecessary portions using a trimmer and the like.
This becomes enabled when 'Booklet Printing' is selected in 'Print Style'.
Booklet..>Detailed Settings for Booklet
If 'In Device' in 'Booklet Printing Process' is selected, 'Use Creep [Displacement] Correction'
becomes selectable.
2-10
2-11
WSD
WSD(Web Services on Devices)
WSD is supported on Windows Vista by default.
It is the protocol to control devices via Web service.
The major features are:
1. Printer driver auto-installation
Can install a printer driver by getting the device ID through device search on network using
Vista's standard tool (NetworkExplore/AddPrinterWizard).
2. End job notification
When the device receives a print job, it issues the event notification upon completing paper
delivery. Vista can detect End job with this notification so that Canon utility is no longer
needed.
F-2-20
Operation on Vista
Transmission of print job.
Search devices.
WSD settings:
User Mode > Top > Preferences > Network > TCP/IP Settings > WSD Print Settings
Use WSD
Use WSD Browsing
F-2-19
2-11
Functions > Basic Function > PDL Selection (PnP) > Setting is available in the following:
2-12
F-2-21
Functions > Basic Function > PDL Selection (PnP) > Setting is available in the following:
2-12
2-13
Trapping
Trapping is the processing to prevent the image deterioration due to
plate displacement by overlapping the surrounding color of target pixel
on the target pixel.
The setting of the trapping is possible from LUI.
Setting Procedure
1. In user mode: [Printer Settings] > [Quality] > [Advanced Settings] > [Trapping]
(It is set to OFF in default. When it is set to ON, initial setting value is Trapping Width 1
Trapping Density 100%.)
F-2-23
3. Set Trapping Density (Trapping Density is decided evenly for C, M, Y and K). It can be
specified from 25, 50, 75 or 100%.
F-2-22
2. Set Trapping Width (Trapping Width is decided evenly for right to left and up and down).
Pixel can be specified from 1, 2 or 3 pixels.
F-2-24
Service Mode UI
Following settings are possible in service mode.
Threshold value of target pixel density that Trapping is executed for per C,M,Y,K. [maximum
13 bit (0-4096)].
Trapping Density per C,M,Y,K [maximum 6 bit (0-16)].
2-13
2-14
Restrictions
Since the registration displacement differs depending on the product device, even though
the same pixel width and pixel density are specified and print is output, effects will differ
depending on devices.
Moreover, since the time, environment and registration width on image differ even on the
same product, effects will differ in each case when Trapping processing is executed.
2-14
Functions > New Function > Kyuanos > Matching Mode: Setting [Kyuanos] of Driver
2-15
New Function
Kyuanos
This Kyuanos function is an image function. Kyuanos function is the Canon new color
management technology and performs monitoring under the users environment light and
high accuracy color matching for print result.
Depending on PDL type, there is a case to select Kyuanos or to select Device Link Profile as
a matching mode.
Printer driver is corresponding to Kyuanos.
NOTE:
From this version, imageRUNNER ADVANCE C5051 has same Kyuanos function as
imageRUNNER ADVANCE C9075.
F-2-25
2. Monitor setting
- sRGB
Matching is performed in accordance with sRGB display monitor.
- Adobe RGB
Matching is performed in accordance with Adobe RGB display monitor.
F-2-26
Functions > New Function > Kyuanos > Matching Mode: Setting [Kyuanos] of Driver
2-15
Functions > New Function > Kyuanos > Setting [Kyuanos] of User Mode
2-16
Restriction
Following is the restrictions regarding the environment light and the color space of monitor.
- They are enabled only when [Kyuanos] is selected in [Matching Mode].
F-2-27
F-2-28
Functions > New Function > Kyuanos > Setting [Kyuanos] of User Mode
F-2-30
2-16
Functions > New Function > Kyuanos > Setting [Kyuanos] of User Mode
2-17
F-2-31
F-2-32
Functions > New Function > Kyuanos > Setting [Kyuanos] of User Mode
2-17
Installation
Installation
procedure
Installation
Installation Procedure
Overview of the Installation Procedure
As a rule, the user is expected to obtain a license key and register it to the device. Detailed
instructions are found in the User's Guide. The following is an outline of the instructions:
1. Using the following URL, access the LMS, and obtain the license key by following the
instructions shown on the screen:
http://www.canon.com/lms/license/
3-2
>> Make sure that the number has been correctly typed in.
>> Make sure that the license key is the correct one.
"The function has already been enabled."
>> Make sure that the Kit has not already been enabled.
4. Hold down the control panel power switch for 3 sec or more. Follow the instructions shown
on the screen for shut-down sequence so that the main power switch may be turned off. Turn
off the main power switch, wait for 10 sec, and turn it back on.
5. The registered license will become valid when the device is turned back on. When it has
started normally, press the Counter key, and click the Device Configuration button to make
sure that the Kit is indicated as part of the options.
Memo
A license key is issued in exchange for the 16-digit number indicated on the License
Access Number Certificate and the serial number of the device (e.g., ABC01234)
to which the license will be registered. The device serial number will be indicated in
response to a press on the Counter key on the iR device (under [Serial Number]).
2. Copy the 24-digit number shown on the Web browser screen in the space given for the
purpose on the License Access Number Certificate sheet.
Important
Be sure to double-check the number to avoid an error. Be sure that the user is aware
of the importance of the License Access Number Certificate and that it must be stored
away in a safe place.
3. Make the following selections: user mode>system control setup>license control. Then, type
in the 16-digit number, and click [Execute]. In response, the license key will be registered and
the appropriate functions will be enabled. Otherwise, any of the following error messages will
appear:
"The number of the license key is not correct. Check the license key."
>> Make sure that the license key is not issued for a different device.
3-2
Maintenance
Service Mode
Related
Error code
Related
Maintenance
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
4-2
Service Mode Item Used to Invalidate a License for Transfer to a Different Device (Level 2)
Possible Situation
A license may be used on a different device through transfer, as when replacing the device
at the end of a lease agreement. To do so, the user must first invalidate the existing license
by performing a set of steps referred to as "invalidation of a license" using service mode. At
times, both source and target of transfer may be the same device, and a license therefore
may also be invalidated only temporarily. It is important to note that the user must contact
the Sales Company to make a license good regardless of whether it has been invalidated
intentionally or inadvertently.
F-4-1
Screen Design:
Invalidation Procedure
Invalidation consists in invalidating the license in service mode and generating an invalidation
certificate that proves the completion of invalidation. Invalidation may take place for individual
optional functions, and a specific function becomes no longer available as soon as an
invalidation certificate is issued. The user contacts the Sales Company and provides the
following: the invalidation certificate, the device serial number of the source of transfer, the
device serial number of the target of transfer, reason of transfer. In response, the Sales
SET-xxxx: indicates the license status. If installed, the option is identified as '1' under A.
To invalidate an option for transfer, select it, and type in '0' under B; then, click [OK] so that
the option will be invalidated and an invalidation certificate will be issued.
TR-xxxx: indicates any invalidation certificates that have been generated under C.
xxxx may be any of the following:
Company may issue a license key for new installation on a different device. The user must
TR-XXXX
SEND
Detail
SEND function
take note of the new license key in writing, and keep it as a record after registering it to the
ENPDF
Encrypted PDF
target device.
SPDF
Searchable PDF
EXPDF
PDF Expansion
PDFDR
Installation Procedure
SCR
1. Start service mode, and activate Level 2 so that the following is true:
HDCLR
COPIER>OPTION>LCNS-TR
BRDIM
The following screen appears, showing the current status of various options:
VNC
WEB
HRPDF
WTMRK
Secure Watermark
TSPDF
USPDF
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
4-2
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
TR-XXXX
DVPDF
Detail
Device Signature PDF
SCPDF
Searchable PDF
AMS
ACQ
ERDS
PS
PS function
PCL
PCL function
PSLI5
LIPS5
LIPS4
PSPCL
PS/PCL function
PCLUF
PCL/UFR II function
PSLIP
PSPCU
LXUFR
UFR II function
HDCR2
USB-M
MOBIL
JBLK
AFAX
Remote Fax
REPDF
OOXML
XPS
4-3
in response, may issue a new license key that may be registered on the target device.
6. Register the new license key to the target device, and check to make sure that the function
has been enabled.
T-4-1
MEMO
Not all foregoing options are available in all countries and regions.
2. If an option has already been installed, '1' will be indicated under A. If you want to invalidate
it, select it, and type in '0' so that the indication under B will change to '0'.
3. Thereafter, when [OK] is pressed, the indication under A will change to '0' and, at the same
time, an invalidation certificate will be indicated in the form of a number. Take note of it in
writing together with the serial number of the target device.
4. When the target device is ready, check its serial number.
5. Contact the Sales Company, and provide the following: invalidation certificate for transfer,
serial number of the source device, serial number of the target device. The Sales Company,
Maintenance > Related Service Mode > Invalidating the License for Transfer to a Different Device (Level 2) > Screen Design:
4-3
Maintenance > Related Error Code > Confirm method of error code
4-4
F-4-2
F-4-3
Maintenance > Related Error Code > Confirm method of error code
4-4
#853
4-5
#853
Some jobs entered by the iR host machine may be cancelled even if the printing instruction is
given to the iR host machine from the PC.
If you check the error code in the following operations, you can obtain the reference
State
32 Job cancel due to spool
over of CPCA Send data
(Job type: Print job, PCFAX job)
Cause
When 'Spool' is set to 'ON',
the data received from the
Host cannot be spooled
completely because the
spool area (HDD) of the
received data is full.
Remedy
Use Spool function under
System Control Setup >
Network Setup in service
mode.
Re-send the data after the
Spool function is set to 'OFF'.
The error code "#853" (An error or non-support function is detected in the host machine and
the job is canceled) has 30 or more causes. It has been difficult to specify the cause, as 30
or more causes are lumped together as #853.
The details of the cause of Job cancel are shown in the list below.
First, codes: #xxx shown in the attachment list, are allocated to the causes that are lumped
together as #853 in Job history on the UI screen.
Select FUNCTION > MISC-P > PJH-P-1/2, then detailed codes in the list below are displayed.
T-4-2
A detailed history report is output so that users can check the internal (CPCA job log) detailed
cause in service mode, since detailed causes are grouped to some extent on the UI display.
But, this report shows only PDL print job.
FUNCTION > MISC-P > PJH-P-1 (Latest 100 jobs)
FUNCTION > MISC-P > PJH-P-2 (Max. 5,000 jobs)
4-5
Imaging(error)
4-6
Invalid data
When an error is detected in TIFF or JPEG image except PDF while the direct print function
works, it conducts error processing.
This error occurs when invalid data, which is impossible to be analyzed, is detected during
data analysis of JPEG or TIFF. When the direct print function detects invalid data, it prints
pages that have already been rendered and executes either of the followings. After that, if
Initialization error
impossible to continue the processing, it skips importing the remaining data in printing job and
it is possible to continue the processing, printing job of the remaining data is done. If it is
ends.
If [Warning display] is set to 'ON', it displays an error message and moves to error state.
Invalid data
Processing error
If [Warning display] is set to 'OFF', it does neither display any message nor move to error
Initialization error
This error occurs when specified memory cannot be allocated at the startup of direct print
function. When initialization error is detected, the function prints pages that have already
been rendered and executes the following processing.
Regardless of [Warning display] setting in IMAGING set up menu, it displays an error
message on the panel and moves to error state.
After moving to the error state, turning the power on/off by user operation is the only way to
return the function to the normal operating state.
state.
Processing error
This error occurs when something abnormal is detected while the direct printing function
works. For example, an error that occurs when the function is importing data from receiving
buffer, or an error that occurs when the function is accessing to hard disk. When this
translator detects a processing error, it prints pages that have already been rendered and
executes the following.
Regardless of [Warning display] setting in IMAGING set up menu, it displays an error
message on the panel and moves to error state.
After that, if the job is canceled by user operation, it returns to normal, skips importing the
remaining data, and ends.
full error is detected, the function prints pages that have already been rendered and executes
the following processing.
Regardless of [Warning display] setting in IMAGING set up menu, it displays an error
message on the panel and moves to error state.
After moving to the error state, if the job is canceled by user operation, it returns to normal,
skips importing the remaining data, and ends.
4-6