Professional Documents
Culture Documents
AutoPIPE
Applies To
Product(s): AutoPIPE,
Version(s): 2004, XM, & V8i
Environment: N/A
Area:
Subarea:
Original Author: Bentley Technical Support Group
Design Factor:
Load effect Factors are used to multiply the indicated load case in the respective combination
created by the "Category Components" settings below. .
ALS Category:
Functional = Grt1p1 x (ALS Functional Factor)
Environmental = W1 x (ALS Environmental Factor)
Interference = U1 x (ALS Interference Factor)
Accidental = S1 x (ALS Accidental Factor)
Combinations created: GrT1P1+W1+U1+S1, GrT2P2+W1+U1+S1,....GRTnPn+W1+U1+S
Review the code calculations created under Tools> Combinations> Code Comb tab...
General tab:
The Specific gravity and External water surface can be changed under Load> Buoyancy
Per code definition: "Local incidental - I relation to pipelines, this is the internal pressure at any
point in the pipeline system or pipe line section for the corresponding design pressure,
incidental pressure or test pressure adjusted for the column of weight, see Sec.4 B200"
This dialog provide values used in the Incidental pressure calculation, per DNV -2012 sec 4, B202
Select the pressure Case that will be updated per this calculation.
See Also
Bentley AutoPIPE
External Links
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Comments or Corrections?
Bentley's Technical Support Group requests that you please submit any comments you have on
this Wiki article to
the "Comments" area below. THANK YOU!
DNV
AutoPIPE
Model Options
Piping Codes
Related