Professional Documents
Culture Documents
DUBO
retaining rings
10
DUBO
retaining rings for
socket head screws
11
KORREX
insulating bushes
type lI / M
14
KORREX
insulating bushes
type II / WW
14
KORREX
insulating bushes
type I / WW
14
MARYLAND METRICS
P.O.Box 261 Owings Mills, Md 21117 USA
ph: (410)358-3130 (800)638-1830
fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com
email: sales@mdmetric.com
DUBO
WORLDWIDE
ORIGINAL
DUBO
toothed collar rings
15 / 16
KORREX
snapcaps
17
KORREX
protective caps for
socket head screws
18
KORREX
flat washers
21
KORREX
hexagon nut caps
22
KORREX
rosettes
23
KORREX
round nut caps
24
ver gg08a
10
Patented throughout
the world.
DUBO retaining rings
can be used in
conjunction with:
DUBO toothed collar rings
KORREX insulating bushes
KORREX protective caps
Insulation and protection of the surface of the material because DUBO retaining rings:
are chemically resistant to Alkalis, to solutions of neutral inorganic salts, to oils, fats,
petrol, benzine, alcohol, acetone, diluted acids, and sea water;
prevent electrolytic corrosion between two different metal surfaces;
prevent fatigue in the bolt material.
Physical properties:
Tensile strength up to the elastic limit
Ultimate tensile strength
Modulus of elasticity
Breakdown voltage
Rockwell hardness
Specific gravity
7 N/mm2
26 N/mm2
66 N/mm2
18 kV/mm
115 R
1,14
10
before tightening
Part.No.
Dimensions in mm
1002000000000
1003000000000
1003500000000
1004000000000
1005000000000
1006000000000
1006001000000
1007000000000
1008000000000
1009000000000
1010000000000
1011000000000
1012000000000
1013000000000
1014000000000
1015000000000
1016000000000
1017000000000
1018000000000
1019000000000
1020000000000
1022000000000
1024000000000
1025000000000
1027000000000
1030000000000
1033000000000
1036000000000
1039000000000
1042000000000
1045000000000
1048000000000
1052000000000
Temperature range
Material nylon 6
after tightening
Metric
threads
M2
M3
M 3,5
M4
M5
M6
Inch
threads
1/4"
M7
M8
3/8"
M 10
7/16"
M 12
1/2"
M 14
9/16"
M 16
5/8"
M 18
3/4"
M 20
M 22
M 24
1"
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
before tightening
5,30
8,00
9,00
9,50
10,60
12,70
12,70
14,50
16,20
19,60
19,60
21,90
23,60
25,40
25,40
28,60
29,40
31,20
35,10
36,90
35,70
41,60
41,60
47,30
47,30
53,10
57,70
63,50
69,30
74,00
80,80
86,50
92,40
2,10
3,20
3,80
4,15
5,15
6,20
6,50
7,10
8,10
9,70
10,20
11,30
12,20
12,80
14,20
14,40
16,20
16,00
18,20
19,20
20,30
22,50
24,30
25,60
27,30
30,20
33,20
36,20
39,20
42,20
45,20
48,20
52,30
1,50
2,20
2,40
2,60
3,00
3,50
3,50
3,80
4,00
4,50
4,50
4,70
5,00
5,00
5,50
5,50
6,00
6,00
6,50
7,00
7,00
7,50
8,00
8,00
8,50
8,50
9,00
10,00
11,00
13,00
16,00
17,00
17,00
0,50
0,80
0,90
1,00
1,20
1,40
1,40
1,50
1,60
1,80
1,80
1,90
2,00
2,00
2,10
2,10
2,20
2,20
2,30
2,40
2,40
2,50
2,60
2,60
2,70
2,80
3,00
3,20
3,40
3,80
4,20
4,50
4,60
after tightening
without
with
toothed collar ring
V1
V2
3,50
5,00
5,50
6,00
7,00
8,50
9,25
8,50
9,25
9,00
9,75
10,50
11,50
12,50
13,50
12,50
13,50
13,50
15,00
14,50
16,00
16,00
17,50
16,50
18,00
18,00
19,50
19,00
20,75
19,00
20,75
21,50
23,25
23,00
24,75
23,00
24,75
24,50
26,50
26,00
28,00
28,00
30,00
28,50
30,50
30,50
32,50
34,00
36,00
38,00
40,00
41,00
45,00
51,00
55,00
57,00
packing
unit/pcs
500
500
500
500
500
500
500
500
500
100
500
100
500
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
11
The specifications of DUBO retaining rings used in conjunction with DUBO toothed collar
rings also apply in principle for DUBO retaining rings for socket head screws. It is the
same ring, but with special dimensions to suit socket head screws.
Instructions for fitting DUBO retaining rings
To ensure reliable locking and sealing of the screw it is important to observe the following
points on assembly:
1. The screw should be tightened until the outer reinforcing rim of the ring is distorted and
has engaged around the head of the screw. The screw generally then has the right initial stress. Because the material of the ring slides over the surface of the surrounding
component, it feels as if the screw still needs further tightening, but this is not so. The
required initial stress is obtained immediately on distortion of the ring and the screw is
then completely locked.
Further tightening of the screw is harmful.
2. The smoothest finish possible on the bearing surface of the component improves the
locking and sealing.
3. The correct diameter of ring should be used for each thread diameter.
4. Where the DUBO retaining ring is used with a DUBO toothed collar ring the screw can
be tightened up to any permitted torque value.
before tightening
Part.No.
Dimensions in mm
1104000000000
1105000000000
1106000000000
1108000000000
1110000000000
1112000000000
1113000000000
1114000000000
1116000000000
1118000000000
1120000000000
1122000000000
1124000000000
Temperature range
Material nylon 6
Metric
threads
M4
M5
M6
M8
M 10
M 12
after tightening
Inch
threads
1/2"
M 14
M 16
M 18
M 20
M 22
M 24
11
7,70
9,80
10,50
14,00
17,00
19,00
20,00
23,00
25,00
28,00
31,50
34,50
37,50
4,10
5,15
6,50
8,10
10,20
12,20
12,80
14,20
16,20
18,20
20,20
22,20
24,30
2,00
3,00
2,50
3,30
3,80
4,40
4,40
5,20
5,60
6,10
6,50
6,80
7,00
0,80
1,20
1,00
1,50
1,50
2,00
2,00
2,00
2,00
2,30
2,50
2,80
3,00
packing
unit/pcs
500
500
500
500
500
100
100
100
100
100
100
100
100
14
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
brass
aluminium
iron
eloxal
iron
zinc
-------------------------------------------------------------------
iron
steel
copper
iron
lead
tin
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
14
TYPE ll / M
Dimensions in mm
Part.No.
1404000000000
1405000000000
1406000000000
1408000000000
1410000000000
1412000000000
1416000000000
1420000000000
Metric
M4
M5
M6
M8
M 10
M 12
M 16
M 20
L
5-20
5-20
5-25
5-25
5-25
5-25
5-25
5-25
d1
4,30
5,30
6,50
8,20
10,20
12,30
16,30
20,30
d2
5,80
6,80
8,00
10,40
12,50
15,00
19,30
23,30
D
9,50
12,00
13,00
18,00
21,00
24,00
30,00
36,00
s
1,00
1,00
1,00
1,00
1,00
1,00
2,00
2,00
packing unit/pcs
500
500
500
500
500
500
500
100
14
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
brass
aluminium
iron
eloxal
iron
zinc
-------------------------------------------------------------------
iron
steel
copper
iron
lead
tin
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
14
TYPE ll / WW
Part.No.
Dimensions in mm
1402550000000
1402560000000
1402570000000
1402580000000
1402590000000
1402600000000
1402610000000
1402620000000
1402630000000
1402640000000
1402650000000
1402660000000
1402670000000
1402680000000
1402690000000
1402700000000
1402710000000
for thread
size
1/4"
5/16"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
7/8"
1"
d1
d2
7
11
13,5
16
20,5
8,5
10
11
13,5
19
22
11
16
11
23
16
30
7,00
8,00
10,00
10,00
10,00
13,00
13,00
13,00
13,00
13,00
13,00
16,00
16,00
20,00
20,00
23,00
25,60
10,00
10,00
12,00
13,00
12,00
14,00
15,00
16,00
16,00
15,00
16,00
19,00
19,00
22,00
22,00
25,00
28,60
14,00
22,50
25,50
21,50
25,00
22,00
21,00
28,00
28,00
28,50
28,00
34,00
34,00
40,50
40,50
45,50
40,00
1,50
1,00
1,00
1,50
1,00
1,00
1,00
1,50
1,50
1,00
1,50
1,00
1,50
1,00
1,00
1,00
2,00
packing
unit/pcs
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
100
100
14
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
brass
aluminium
iron
eloxal
iron
zinc
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
-------------------------------------------------------------------
iron
steel
copper
iron
lead
tin
14
TYPE l / WW
Part.No.
Dimensions in mm
1401060000000
1401080000000
1401090000000
1401100000000
1401110000000
1401120000000
1401130000000
1401140000000
1401160000000
1401170000000
for thread
size
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
d1
d2
13
16
10
12
14
15
17,5
23
12
14,5
10,00
10,00
13,00
13,00
13,00
12,50
14,00
13,00
16,00
16,50
12,00
13,00
15,00
16,00
16,00
14,50
16,00
16,00
18,50
19,50
22,00
21,00
23,00
28,00
26,00
24,00
28,00
26,00
31,00
33,00
3,50
3,50
5,00
5,00
6,00
5,00
6,00
5,00
8,00
8,00
packing
unit/pcs
500
500
500
500
500
500
100
100
100
100
15 / 16
The DUBO toothed collar ring is an unique addition to the DUBO retaining ring, and is
intended for use in combination with high quality steel nuts (8.8). It will now be possible to
admit any desired bolt tension without damaging the DUBO retaining ring on account of
high bolt and nut loads, whereas this invention also permits to use whatever nut as a locking nut, which can be re-used. By putting the DUBO retaining ring into this toothed collar
ring, optimum deformation of the DUBO ring is obtained after tightening the nut. The deformation of the DUBO ring causes the locking and tightening effect according to the DUBO
principle.
At the spots where the tooths have been provided, the DUBO retaining ring is perforated
under high pressure and after complete deformation, constitutes an unity between toothed
collar ring and nut. When this situation is obtained, the nut to be locked has come into
contact with the steel tooths.
From this moment on, every desired bolt pressure can be admitted; in fact a partly rigid
connection between steel on steel and nylon is obtained. Due to the fact that the DUBO
ring is compressed under high pressure between the tooths of the collar ring, a constant
elastic action is obtained.
Advantages:
1. the DUBO retaining ring can from now on take up any desired bolt pressure, such as
for bolts 8.8 and 10.9 and lock these bolts against loosening;
2. it is possible to make a locking nut out of any nut;
3. it can be re-used many times;
4. the locking material lies under the nut: thus damping, tightening, locking at constant
bolt pressure;
5. high friction coefficient due to the combination of steel dents and DUBO retaining ring;
6. nylon DUBO retaining ring can be used now with higher temperatures ( 180C);
7. metallic contact (electrical purposes) is obtained in cases where it is required;
8. excellent lockwasher for tap-bolts.
15 / 16
before tightening
Dimensions in mm
Part.No.
Material
1504000000000
1604000000000
1506000000000
1606000000000
1508000000000
1608000000000
1510000000000
1610000000000
1512000000000
1612000000000
1514000000000
1614000000000
1516000000000
1616000000000
1517000000000
1518000000000
1618000000000
1519000000000
1522000000000
1622000000000
1527000000000
1627000000000
1530000000000
1630000000000
1533000000000
1633000000000
1536000000000
1636000000000
steel
stainless
steel
stainless
steel
stainless
steel
stainless
steel
stainless
steel
stainless
steel
stainless
steel
steel
stainless
steel
steel
stainless
steel
stainless
steel
stainless
steel
stainless
steel
stainless
after tightening
Hexagon head
screws
Metric
threads
M4/5
M4/5
M6
M6
M8
M8
M 10
M 10
M 12
M 12
M 14
M 14
M 16
M 16
5/8"
M18/20
M18/20
3/4"
M 22/24
M 22/24
M 27
M 27
M 30
M 30
M 33
M 33
M 36
M 36
Inch
threads
3/16"
3/16"
1/4"
1/4"
3/8"
3/8"
1/2"
1/2"
5/8"
5/8"
7/8"
7/8"
Socket head
screws
Metric
threads
M6
M6
Inch
threads
1/4"
1/4"
M 10
M 10
M 12
M 12
M 14
M 14
M 16
M 16
M 18
M 18
M 20
M 22
M 22
M 24
3/8"
3/8"
1/2"
1/2"
5/8"
5/8"
7/8"
7/8"
packing
unit/pcs
11,20
11,20
13,20
13,20
17,20
17,20
21,30
21,30
24,50
24,50
27,00
27,00
31,25
31,25
33,00
37,50
37,50
39,50
44,00
44,00
50,50
50,50
56,00
56,00
61,00
61,00
67,00
67,00
6,80
6,80
9,00
9,00
12,00
12,00
13,50
13,50
15,50
15,50
17,50
17,50
21,00
21,00
23,00
26,00
26,00
27,00
30,50
30,50
35,00
35,00
40,00
40,00
45,00
45,00
50,00
50,00
2,50
2,50
3,40
3,40
3,80
3,80
4,20
4,20
4,50
4,50
4,80
4,80
5,00
5,00
5,00
5,50
5,50
5,50
6,00
6,00
7,00
7,00
7,50
7,50
8,00
8,00
8,30
8,30
0,65
0,65
0,75
0,75
1,00
1,00
1,50
1,50
1,50
1,50
1,50
1,50
1,75
1,75
1,75
1,75
1,75
1,75
2,00
2,00
2,00
2,00
2,50
2,50
2,50
2,50
2,75
2,75
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
KORREX snapcaps
ORIGINAL
17
KORREX snapcaps
ORIGINAL
17
V.Z.K
Part.No.
Dimensions in mm
C.L.K.
Metric Type
d1
d2
d3
h1
1704010000000
1704020000004
1704030000001
M4
M4
M4
Cap
V.Z.K. 4,10 8,00 10,50 3,80
C.L.K. 4,10 8,00 10,50
1705010000000
1705020000004
1705030000001
M5
M5
M5
Cap
V.Z.K. 5,10 10,00 12,70 4,50
C.L.K. 5,10 10,00 12,70
1706010000000
1706020000004
1706030000001
M6
M6
M6
Cap
V.Z.K. 6,10 12,00 15,00 6,00
C.L.K. 6,10 12,00 15,00
1708010000000
1708020000004
1708010000003
M8
M8
M8
Cap
V.Z.K. 8,20 16,00 18,30 6,20
C.L.K. 8,20 16,00 18,30
Cap
h2
D1
D2
H1
H2
packing unit
pcs.
500
500
500
11,00 12,50
5,40 4,40
13,00 15,00
6,50 5,50
500
500
500
15,30 17,50
8,30 7,00
500
500
500
18,50 20,80
8,60 7,40
500
500
500
90,00
3,00
90,00
3,50
90,00
4,50
90,00
5,20
18
Because of the many advantages offered by socket head screws in comparison with normal hexagon-head screws, the use of socket head screws is increasing all the time. A disadvantage of them is however the accumulation of dirt in the socket, making them sometimes difficult to unscrew.
This problem is solved in a simple manner by usipg KORREX protective caps.
In addition to their use as protective caps for socket head screws, KORREX protective
caps can also be used for other purposes, for example to seal the ends of tubes or to seal
drilled holes.
In fact the possible uses of KORREX caps are unlimited.
Advantages:
no corrosion of the screw head;
the screw is easier to undo;
the protective caps are easy to fit and can be re-used many times;
the improve the appearance of all assemblies;
reduced maintenance costs;
unlimited possible applications.
Part.No.
Dimensions in mm
1805000000000
1806000000000
1808000000000
1810000000000
1812000000000
1814000000000
1816000000000
1818000000000
1820000000000
1822000000000
metric
treads
M 5
M 6
M 8
M 10
M 12
M 14
M 16
M 18
M 20
M 22
head
width
4
5
6
8
10
12
14
14
17
17
18
2,80
3,20
3,80
4,30
5,50
6,30
7,50
7,50
7,40
7,40
1,50
1,80
2,40
2,80
3,40
3,50
3,80
3,80
4,40
4,40
9,10
10,10
13,10
16,00
18,20
22,10
23,80
23,80
30,10
30,10
4,30
5,40
6,30
8,20
10,50
12,50
14,50
14,50
17,60
17,60
packing
unit/pcs
500
500
500
500
100
100
100
100
100
100
21
The KORREX flat washer detent is chemically resistant to alkalis, saline, inorganic
solutions neutral, weak oils, fats, gasoline, benzine, alcohol, acetone, acids and water of
sea.
21
D
d
H
Dimensions in mm
Prod. nr.
packing unit/pcs
2103050000000
2103090020000
2105090000000
2105140000000
2102200000000
2112240000000
2112300000000
2114450000000
2114240000000
2117260000000
2117300000000
3.2
3.7
5
5
10
12.5
12.5
14
14.5
17
17
5.5
9
9.5
14
20
24
30
45
24
26
30
1.2
2.0
2.0
1.5
4.0
1.0
1.0
4
4
5
3
500
500
500
500
500
100
100
100
100
100
100
22
The recently developed KORREX hexagon nut caps, which offer the advantages referred
to below, will without doubt find wide use in all branches of industry
These KORREX nut caps convert any hexagon nut into a dome nut without modifying the
existing assembly or connection.
The nut cap merely has to be pressed over the flats of the nut after the connection has
been assembled.
By simple application to
any hexagon nut the effect
of a dome nut is obtained.
KORREX hexagon nut
caps can be used in
conjunction with
KORREX insulating
bushes and
DUBO retaining rings
Advantages:
Dome nuts are no longer necessary;
The thread is sealed;
Both bolt and nut are protected;
Protection against corrosion;
Saving in weight;
Protection against accidents;
Simple assembly;
Attractive appearance;
The nut caps can be used over and over again.
Important:
The KORREX nut caps, used in conjunction with KORREX insulating bushes and DUBO
retaining rings, guarantee reliable insulation of bolted connections, at the same time
securing the nut and bolt against loosening.
22
Part.No.
Dimensions in mm
2204070000000
2204058000000
2206100000000
2207110000000
2208130000000
2210170000000
2212190000000
2214220000000
2216240000000
2220300000000
2222320000000
2224360000000
2227410000000
2230460000000
2233500000000
2236550000000
S1
S2
8,10
10,80
13,30
14,20
15,30
20,50
22,00
24,50
28,00
34,00
37,00
41,00
47,00
52,00
57,50
62,20
4,80
6,90
6,90
7,40
8,00
10,30
11,50
13,00
15,10
18,00
19,00
20,00
22,00
24,00
36,00
38,00
6,50
9,20
12,00
12,40
13,60
18,50
20,00
22,50
25,70
31,00
34,00
38,00
44,00
49,00
52,50
62,40
3,80
5,30
6,00
6,50
7,40
9,50
10,60
12,00
14,00
16,50
17,50
18,50
20,50
22,50
30,50
36,00
7,60
9,50
11,00
12,00
14,30
18,00
20,20
23,50
26,00
32,00
34,00
38,00
43,00
48,00
53,00
57,00
6,80
7,80
9,80
10,80
12,80
16,70
18,70
21,70
23,70
29,80
31,80
35,80
40,80
45,80
49,00
55,50
8,60
9,80
11,60
12,50
15,00
18,80
20,80
24,30
26,50
33,00
35,00
39,50
44,50
49,50
54,00
58,70
packing
unit/pcs
500
500
500
500
500
100
100
100
100
100
100
100
100
100
100
100
KORREX rosettes
ORIGINAL
23
KORREX rosettes can be used on all bolts and screws with countersunk head.
KORREX rosettes provide insulation and excellent surface-protection.
By applying these rosettes damage to the surface is avoided, damage which not only gives
a bad appearance but which may also have unfavourable effects.
KORREX rosettes
ORIGINAL
23
Dimensions in mm
Part.No.
2303000000000
2304000000000
2305000000000
2306000000000
2308000000000
Metric
M3
M4
M5
M6
M8
d1
3,30
4,10
5,20
6,30
8,20
d2
6,60
6,60
9,50
11,60
15,00
D
8,10
7,60
11,30
13,40
18,00
H
2,20
2,00
2,40
2,60
4,00
90
90
90
90
90
packing unit/pcs
500
500
500
500
500
24
The recently developed KORREX nut caps, which offer the advantages referred to below,
will without doubt find wide use in all branches of industry. These KORREX nut caps convert any hexagon nut into a dome nut without modifying the existing assembly or connection.
The nut cap merely has to be pressed over the flats of the nut after the connection has
been assembled.
By simple application to
any hexagon nut the effect
of a dome nut is obtained.
KORREX nuts caps
can be used in
conjunction with
KORREX insulating
bushes and
DUBO retaining rings
Advantages:
Dome nuts are no longer necessary;
The thread is sealed;
Both bolt and nut are protected;
Protection against corrosion;
Saving in weight;
Protection against accidents;
Simple assembly;
Attractive appearance;
The nut caps can be used over and over again.
Important:
The KORREX nut caps, used in conjunction with KORREX insulating bushes and DUBO
retaining rings, guarantee reliable insulation of bolted connections, at the same time
securing the nut and bolt against loosening.
24
Part.No.
Dimensions in mm
2406100000000
2408130000000
2410170000000
2412190000000
2416240000000
S1
S2
13,30
15,30
20,50
22,00
28,00
6,90
8,00
10,30
11,50
15,10
12,00
13,60
18,50
20,00
25,70
6,00
7,40
9,50
10,60
14,00
11,00
14,30
18,00
20,20
26,00
9,80
12,80
16,70
18,70
23,70
13,00
16,60
22,00
24,00
30,00
packing
unit/pcs
500
500
100
100
100
DUBO
retaining rings
10
DUBO
retaining rings for
socket head screws
11
KORREX
insulating bushes
type lI / M
14
KORREX
insulating bushes
type II / WW
14
KORREX
insulating bushes
type I / WW
14
MARYLAND METRICS
P.O.Box 261 Owings Mills, Md 21117 USA
ph: (410)358-3130 (800)638-1830
fx: (410)358-3142 (800)872-9329
web: http://mdmetric.com
email: sales@mdmetric.com
Click here for a RFQ (request for
quotation) form
DUBO
WORLDWIDE
ORIGINAL
DUBO
toothed collar rings
15 / 16
ver gg08a
KORREX
snapcaps
17
KORREX
protective caps for
socket head screws
18
KORREX
flat washers
21
KORREX
hexagon nut caps
22
KORREX
rosettes
23
KORREX
round nut caps
24