Professional Documents
Culture Documents
IT
SE
IN
PA
TT
ER
N
S
LI
C
This would have to be the quickest and easiest romper you will ever make. A great little
everyday outfit for babies and toddlers from 3 months to 4 years old. Soft and comfortable for
your little one to wear all day. You can make it with or without the crotch fasteners.
FE
This style is definitely one to make if you are a beginner --- the pattern is so simple and the
sewing is easy --- nothing tricky. Follow the sewing tutorial closely to learn step by step how to
make the romper. It is best to print out only the pattern and use the tutorial on your computer
so you can zoom the photos.
Use soft pure cotton fabrics for best results --- cotton homespun, poplin or lawn are all suitable.
You can make a fabric shoulder tie or use ribbon --- one long tie, tied into a bow at the front or 2
ties tied up on the shoulders.
The romper is full and easy fitting, plenty of room for a diaper. Always check the size chart for
your correct size --- chest and height measurements are the best guide. If possible check and
adjust elastic size.
ER
N
S
The Fabric lengths are based on a cloth width of 112cm or 45 inches. The lengths below are
enough to cut the shoulder tie as well. If you want to cut the ties in a contrast fabric you will
need about 25cm / 10 x width of fabric.
You will also need 6mm / 1/4 wide elastic for the legs and a small amount of 12mm / 1/2 wide
readymade bias binding for the armhole edges. Large sew-on press snap fasteners x 3.
Make sure that the print you are using is not a one-way- up print --- you will need extra fabric in
this case. The little horse print I used is a one way print.
If you want to use a ribbon for the tie you will need a maximum of 1.60mt or 1.3/4yds of soft
25mm / 1 wide ribbon.
1 = 12mths
70cm /
3/4yd
27cm /
10.1/4
2 = 2yrs
75cm/
7/8yd
28cm /
10.3/4
PA
0 = 6mths
65cm /
3/4yd
25cm /
9.1/2
3 = 3yrs
80cm /
7/8yd
30cm/
11.5
4 = 4yrs
85cm /
1yd
31cm/
12
Elastic x2
00 = 3mths
60cm /
2/3yd
24cm /
9
IN
Size
Fabric
TT
It is easier if you have a serger or overlock machine to finish the seams but if not use the zigzag
stitch on your plain sewing machine.
SE
All the instructions for cutting out the pattern are on each pattern piece and the seam
allowances are included. You should not need to adjust the pattern as it is fairly generous in fit
and can be adjusted a little with the shoulder ties.
Check that you have all the pattern pieces and trims: Note: the fronts and backs are the same.
Elastic x 6mm cut to size x 2
Bias binding x 12mm / 1/2
Large press snap fasteners x 3
Matching thread
FE
LI
C
IT
ER
N
S
TT
PA
FE
LI
C
IT
SE
IN
IT
SE
IN
PA
TT
ER
N
S
FE
LI
C
IT
SE
PA
G
IN
TT
ER
N
S
FE
LI
C
TT
ER
N
S
SE
IN
PA
FE
LI
C
IT
TT
ER
N
S
IT
SE
IN
PA
FE
LI
C
LI
C
IT
SE
IN
PA
TT
ER
N
S
FE
Finished!
ER
N
S
It is usually best to mark out or pin patterns to the wrong or inside face of fabric whether using
a double or single layer. Remember to reverse patterns marked Cut 1 RSU [right-side-up
patterns] when marking out on the wrong side of fabric.
Grain Lines are always placed along the length of the fabric parallel to the selvedge. To cut on
bias grain align pattern grain line to selvedge of fabric thus placing the pattern piece on a bias
angle.
To cut on fold place centre fold edge of pattern along fold of fabric OR on a single layer of
fabric mark out pattern by mirroring the pattern piece at the centre fold line.
PA
TT
To cut a pair place pattern on double layer of fabric and cut 1 OR on a single fabric layer cut
pattern once face-up and once reverse-side-up.
Cutting out
IN
Always cut accurately along edge of pattern to avoid altering the finished size of the garment.
Clip notches for darts, seam matching and balance points, seam and hem allowances and all
other notations e.g. zippers, gathering, easing etc. Avoid clipping notches too close to seam
stitching lines.
SE
To mark dart points and pocket position points --- punch out drill hole mark on pattern with a
pattern hole punch or use a pin to pierce through pattern and fabric to mark the points on the
fabric with chalk or pencil.
LI
C
IT
Nap --- fabrics with nap such as velvets and corduroys must always have all pattern pieces cut
facing in the same vertical direction, it may be necessary to allow more fabric length for nap
fabrics. You can choose which way to cut the nap by holding the fabric up and looking in a mirror
---- the top of the nap looks shinny and the under nap is matt and deeper in colour. Place
patterns so that the nap is facing upwards for a richer, deeper colour on the finished garment.
Seam Allowance
FE
ER
N
S
TEST SQUARE
10 centimeters
3.15/16 inches
PA
TT
Printing Instructions
LI
C
IT
SE
IN
The Layout Plan page is a map of the pattern and shows how the pages of the pattern fit together. Scroll
through the pattern file and check that all pages have downloaded read the instruction pages and make
a note of the page numbers of the pattern pages.
To open and use a PDF pattern you will need to have Adobe Reader or Adobe Acrobat installed on your
computer. You can get a free download of Adobe Reader --- get.adobe.com/reader/ --- if you are
reading this then you already have it.
It is best to print out only the pages for the pattern and use the sewing tutorial by viewing it on your
computer screen.
To print you need an ordinary desk top printer. The pattern prints on A4 [210x297mm] or
8.1/4x11.5/8 plain paper. If you are in the USA you can use Letter size paper but the page border will
be narrower on the length or you can use Legal size paper.
The PDF is set up to print each of the pattern pages with a 12mm or 1/2"border. Do not change the
scale or orientation of the pages.
To check that your printer settings are correct: In the print box select "Properties" click Text, Plain Paper
and Size A4 --- click OK. Make sure Borderless is NOT selected.
In Print Range fill in the page numbers of the pattern pages only and tick the Preview box.
FE
For "Page Scaling" tick NONE [this is very important]. Tick the box "Auto Rotate and Centre" if you have
this option. DO NOT use Scale, Crop or Fit to Page options. Always choose No Scaling or Actual Size.
Page orientation --- its best to select the Auto portrait/landscape --- the pattern files may contain
pages of both orientations so this should ensure that all print out correctly. If you dont find this setting
and you want to print all the pages in the file, it is advisable to print the pages of the tutorial separately
from the pattern pages. The printer will automatically set the orientation by the first page in the print
range.
Before printing all the pages print out the Test Square page [this page]. The test square when printed in
the correct scale should measure exactly 10cm or a fraction less than 4 inches on all sides. If this is not
correct go back and check your printer settings.
When you have printed the pattern see the instructions for assembling and cutting out the pattern on
the Layout Plan page.
000
00
Age
Approx.
Height
Chest
Waist
Hip
Arm
Length
Back
Length
Waist
height
Crotch
height
3-6
mths
62
44
44
43
27
6-9
mths
68
47
47
46
30
9-12
mths
12-18
mths
18-24
mths
2-3
yrs
76
50
50
49
33
84
53
52
53
37
92
56
54
56
42
16
17
19
31
36
41
20
24
10
4yrs
5yrs
6yrs
7yrs
8yrs
10yrs
100
58
56
59
46
108
60
58
62
49
115
62
60
64
53
120
64
62
66
56
125
66
64
68
59
130
68
66
70
61
140
72
67
74
66
IN
SE
21
23
25
26
27
28
29
30
32
46
52
58
64
69
73
77
80
88
32
36
40
45
49
52
55
57
63
IT
28
Sizes
Centimeters
PA
TT
ER
N
S
LI
C
Inches
000
00
10
Age
Approx
3-6
mths
6-9
mths
9-12
mths
12-18
mths
18-24
mths
2-3
yrs
4yrs
5yrs
6yrs
7yrs
8yrs
10yrs
24.1/2
26.3/4
30
33
36
39
42
45
47
49
51
55
17.1/4
18.1/2
19.3/4
21
22
22.3/4
23.1/2
24.1/4
25
26
26.3/4
28.1/2
18.1/2
19.3/4
20.3/4
21.1/2
22.1/4
22.3/4
23.1/2
24.1/4
25
26
27.1/2
17
18
19.1/4
21
22
22.3/4
23.1/2
24.1/4
25
26
26.3/4
28.1/2
10.1/2
11.3/4
13
14.1/2
16.1/2
18
19.1/4
20.3/4
22
23.1/4
24
26
6.1/4
6.3/4
7.1/2
8.1/4
9.3/4
10.1/4
10.5/8
11
11.3/8
11.3/4
12.5/8
12.1/4
14.1/4
16
18
20.1/2
22.3/4
25.1/4
27
28.3/4
30.1/4
31.1/2
34.1/2
9.1/2
11
12.1/2
14
15.3/4
17.3/4
19.1/4
20.1/2
21.1/2
22.1/2
24.3/4
FE
Sizes
Height
Chest
Waist
Hip
Arm
Length
Back
Length
Waist
height
Crotch
height
ER
N
S
TT
IN
PA
Colour Code
SE
Use the Layout Plan as a guide to lay out all the pages in correct order --- the pages are numbered
according to the printing sequence.
LI
C
IT
Each page meets at the border line so it is best to trim the borders off one or two sides of the overlapping
pages. You can see which borders to trim by looking at where they will join, it is best to trim all on the
same side, place the trimmed edge over the uncut border of the adjoining page. When joining the pages
always match the pattern lines rather than the edges or borders of the pages.
FE
It is best to glue the pattern pages together --- use paper paste or craft glue. Alternately use clear tape --use shorter strips of tape rather than long lengths. Make sure to place tape at the edges of the pattern
pieces and reinforce with extra tape on the back.
To cut out the pattern use the colour code listed on the pattern to determine each separate size. You can
cut out the size you require by following the coloured outline or you can keep the pattern nest in tact by
using a tracing wheel to trace a single size onto a sheet of paper. If patterns are not in colour follow the
size numbers along the lines.
The patterns already have the seam and hem allowances included --- these are indicated on the pattern by
short notch lines and/or noted in the pattern labeling.
The cuttingout instructions are noted on each pattern piece.
Grain lines are marked on all pattern pieces.
See the Cutting Out --- General Instructions for more information on cutting out fabric.
S
N
SE
IN
PA
TT
ER
Colour Code
00 = yellow
0 = red
1 = black
2 = green
3 = aqua
4 = blue
FE
LI
IT
IT
LI
FE
IN
SE
ER
TT
PA
2
N
IT
LI
FE
IN
SE
ER
TT
PA
3
N
IT
LI
FE
IN
SE
ER
TT
PA
4
N
IT
LI
FE
IN
SE
ER
TT
PA
5
N
IT
LI
FE
IN
SE
ER
TT
PA
6
N