Professional Documents
Culture Documents
Installation Guide
ENGLISH
DEUTSCH
ITALIANO
ESPAOL
Page 3
AXIS 247S
Installation Guide
This installation guide provides instructions for installing the AXIS 247S Video Server on
your network. For all other aspects of using the product, please see the Users Manual,
available on the CD included in this package, or from www.axis.com/techsup
Installation steps
Check the package contents against the list below.
Hardware overview. See page 4.
Install the hardware. See page 4.
Set an IP address. See page 5.
Set the password. See page 8.
ENGLISH
ENGLISH
1.
2.
3.
4.
5.
Important!
This product must be used in
compliance with local laws
and regulations.
Package contents
Item
Models/variants/notes
Mounting kit
CD
Printed Materials
Optional Accessory
Connector Cable
Cable with 6 pin Mini-DIN connector for audio in, video in and power out
PoE Midspan
Important!
There are two alternative connections available for power out, video in and audio in,
providing flexible installation. Do not connect more than one video/audio source as the
AXIS 247S is a one-channel video server and can only accommodate one video/audio
stream.
The AXIS 247S can deliver a maximum of 5W (420mA) to a camera (from power out or
Mini-DIN connector) and 50mA from the I/O terminal connector.
Page 4
Hardware overview
Power out
Video in
Audio in
Video In
Network
(PoE)
PoE
Class 2/
Class 3
Control
button
75 Ohm switch
Indicators for:
Network
I/O terminal
Status
connector
Power
Line/Mic
in
Power out
Page 5
Important!
The 6 pin Mini-DIN connector is an alternative connection for power out, video in and
audio in. Do not connect more that one video source to the AXIS 247S.
If PoE is not supported by the network switch, use a PoE midspan/power injector to
connect power to the AXIS 247S.
Assign an IP address
To make it accessible on the network, the AXIS 247S must be assigned an IP address.
Depending on the number of video servers you wish to install, the recommended method for
assigning IP addresses in Windows is either AXIS IP Utility or AXIS Camera Management.
Use the method that best suits your purpose.
Both of these free applications are available on the Axis Network Video Product CD supplied
with this product, or they can be downloaded from www.axis.com/techsup
Method
Recommended for
Operating system
AXIS IP Utility
See page 6
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Notes:
A network DHCP server is optional.
The AXIS 247S has the default IP address 192.168.0.90
If assigning the IP address fails, check that there is no firewall blocking the operation.
For other methods of assigning or discovering the IP address of the AXIS 247S, e.g. in
other operating systems, see page 9.
ENGLISH
ENGLISH
1. Connect the video server to the network using a shielded network cable. Power is also
supplied via the network cable (PoE).
2. Connect the video output of your camera to the AXIS 247S, using a standard 75 Ohm
coaxial video cable with BNC connectors.
3. Optionally connect external input/output devices, e.g. alarm devices. See page 10 for
information on the terminal connector pins.
4. Optionally connect a microphone or line in mono signal to the Line/Mic in connector.
5. Check that the indicator LEDs indicate the correct conditions. See the table on page 11
for further details.
Page 6
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 247S.
Automatic discovery
1.
2.
3.
4.
Check that the AXIS 247S is connected to the network and that power has been applied.
Start AXIS IP Utility.
When the video server appears in the window, double-click it to open its home page.
See page 8 for instructions on how to assign the password.
Page 7
ENGLISH
ENGLISH
Automatic discovery
1. Check that the video server is connected to the network and that power is applied.
2. Start AXIS Camera Management. When the AXIS 247S appears in the window, doubleclick it to open the video servers home page.
3. See page 8 for instructions on how to set the password.
Page 8
Help - Displays
online help on all
aspects of using
the video server.
Page 9
UPnP
Windows
(ME or XP)
Bonjour
MAC OSX
(10.4 or later)
All
A free service from Axis that allows you to quickly and simply
install your video server. Requires an Internet connection with no
HTTP proxy. See www.axiscam.net for more information.
ARP/Ping
All
All
To view the admin pages for the network DHCP server, see the
servers own documentation.
Windows example
UNIX/Linux/Mac syntax
UNIX/Linux/Mac example
arp -s <IP Address> <Serial Number> temp arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
ping -s 408 <IP Address>
4. Check that the network cable is connected to the video server and then start/restart the
AXIS 247S, by disconnecting and reconnecting power.
5. Close the command prompt when you see Reply from 192.168.0.125: ... or similar.
6. In your browser, type in http://<IP address> in the Location/Address field and press Enter
on your keyboard.
Notes:
To open a command prompt in Windows: from the Start menu, select Run... and type
cmd. Click OK.
To use the ARP command on a Mac OS X, use the Terminal utility in Application >
Utilities.
ENGLISH
ENGLISH
Use in operating
system
Page 10
Unit connectors
Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using
shielded cables is recommended.
PoE Switch - Power over Ethernet (IEEE 802.3af), selectable power classification:
Class 2 - no camera connected or a connected analog camera with power consumption up
to 1.4W.
Class 3 - connected analog camera with power consumption up to 5.0W
I/O terminal connector - Used in applications for e.g. motion detection,
event triggering, time lapse recording and alarm notifications:
Pins
Pin
GND
Specifications
Power
12V DC
Max load = 50mA
Digital
Input
Transistor
Output
BNC connector - Connect a 75 ohm coaxial video cable (max. length 800 feet (250 meters).
Mini-DIN - 6 pin Mini-DIN connector for power out, video in and audio in:
Function
Pin
Power out
Audio in
Video in
GND
2,4,6
Mini-DIN Connector
6
4
2
5
3
1
Page 11
Line/Mic in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
Power out - Used to power a camera or other auxiliary equipment 12V DC,
max. load 5W (420mA)
GND +
Important!
Do not connect more than one video/audio source as the AXIS 247S is a one-channel
video server and can only accommodate one video/audio stream.
The AXIS 247S can deliver a maximum of 5W (420mA) to a camera (power out) and
50mA from the I/O terminal connector.
ENGLISH
ENGLISH
LED indicators
LED
Color
Network
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber
Unlit
No network connection.
Green
Status
Power
Indication
Amber
Steady during startup, during reset to factory default or when restoring settings.
Red
Green
Normal operation.
Amber
Connection diagram
AXIS 247S
1
12V
max. 50mA
e.g. pushbutton
2o
z
3o
4
Page 12
Further information
The users manual is available from the Axis Web site at www.axis.com or from the Axis
Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your
AXIS 247S. To see the currently installed firmware version, see the Basic
Configuration web page in the products Setup tools.
Page 13
AXIS 247S
Guide d'installation
Ce Guide d'installation vous explique comment installer le Serveur vido AXIS 247S sur
votre rseau. Pour d'autres informations sur l'utilisation de ce produit, consultez le Manuel
de l'utilisateur, disponible sur le CD fourni ou sur www.axis.com/techsup.
tapes de l'installation
Contenu de l'emballage
Article
Modles/variantes/remarques
Kit de montage
CD
Documentation imprime
Accessoires en option
Cble de connecteur
Cble avec connecteur Mini-DIN 6 broches pour entre audio, entre vido et
sortie alimentation
Midspan PoE
Important !
Deux autres connexions sont galement disponibles pour sortie alimentation, entre vido et entre audio,
rendant ainsi l'installation flexible. Ne connectez pas plusieurs sources
vido/audio car l'AXIS 247S est un serveur vido monocanal qui ne peut traiter qu'un seul flux vido/audio.
L'AXIS 247S peut fournir un maximum de 5 W (420 mA) une camra ( partir de la sortie alimentation ou
du connecteur Mini-DIN) et 50 mA partir du connecteur pour terminal E/S.
FRANCAIS
FRANAIS
1.
2.
3.
4.
Page 14
Prsentation du matriel
Sortie alimentation
Entre vido
Entre audio
Entre vido
Rseau
(PoE)
Interrupteur 75 ohms
Ligne/Mic
entre Sortie alimentation
L'tiquette du produit comporte :
ID du produit et numro de srie (S/N).
Le numro de srie peut tre
requis pendant l'installation.
Bouton de
PoE
Classe 2/ commande
Classe 3
Connecteur
E/S 9 broches
Indicateurs pour :
Rseau
tat
Alimentation
Installation du matriel
Le serveur vido Axis est quip d'un kit de
montage pour support mural ou sur baie (rack).
Les supports de montage peuvent tre
positionns pour monter le serveur vido sur
une surface verticale ou dans une baie. Suivez
les instructions ci-dessous pour fixer les
supports de montage au serveur vido :
Emplacement pour la
plaque mtallique et
le support
Structure grise
Page 15
FRANAIS
1. Connectez le serveur vido votre rseau l'aide d'un cble de rseau blind. L'alimentation est galement fournie via le cble rseau (PoE).
2. Connectez la sortie vido de votre camra l'AXIS 247S l'aide d'un cble vido coaxial
standard de 75 ohms avec connecteurs BNC.
3. Si vous le souhaitez, connectez des dispositifs d'entre/sortie externes, par exemple des
dispositifs d'alarme. Reportez-vous la page 21 pour plus d'informations sur les broches
du connecteur pour terminaux.
4. Si vous le souhaitez, connectez un microphone ou un signal mono entrant au connecteur
d'entre Ligne/Mic.
5. Vrifiez que les tmoins DEL indiquent les conditions correctes. Pour plus
d'informations, consultez le tableau la page 22.
Important !
Recommande pour
Systme d'exploitation
AXIS IP Utility
Voir page 16
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Remarques
FRANCAIS
Le connecteur Mini-DIN 6 broches offre un autre mode de connexion pour sortie alimentation, entre vido
et entre audio. Ne connectez qu'une seule source vido l'AXIS 247S.
Si l'alimentation PoE n'est pas prise en charge par le commutateur rseau, utilisez un midspan PoE/injecteur
de puissance pour brancher l'AXIS 247S.
Page 16
Notez que l'ordinateur excutant l'application AXIS IP Utility doit se trouver sur le mme
segment de rseau (sous-rseau physique) que l'appareil AXIS 247S.
Dtection automatique
1. Vrifiez que l'appareil AXIS 247S est connect au rseau et que l'alimentation est
active.
2. Dmarrez AXIS IP Utility.
3. Lorsque l'icne de lAXIS 247S apparat dans la fentre, double-cliquez dessus pour
ouvrir la page d'accueil correspondante.
4. Consultez la page 18 pour savoir comment affecter le mot de passe.
Page 17
FRANAIS
1. Vrifiez que le serveur vido est connecte au rseau et que l'alimentation est active.
2. Dmarrez AXIS Camera Management. Double-cliquez sur l'icne AXIS 247S lorsqu'elle
apparat dans la fentre de faon ouvrir la page d'accueil.
3. Consultez la page 18 pour savoir comment dfinir le mot de passe.
FRANCAIS
Page 18
Aide : affiche
une aide en ligne
sur l'utilisation
du serveur vido.
Page 19
Bonjour
MAC OSX
(10.4 ou version
ultrieure)
Tous
ARP/Ping
Tous
FRANCAIS
Windows
(ME ou XP)
FRANAIS
UPnP
Page 20
4. Vrifiez que le cble rseau est connect au serveur vido, puis dmarrez/redmarrez
cette dernier en dbranchant, puis en rebranchant l'alimentation.
5. Fermez l'invite de commande quand vous voyez Reply from 192.168.0.125: ...
(Rponse de 192.168.0.125 : ...) ou un message similaire.
6. Dans votre navigateur, tapez http://<adresse IP> dans le champ Emplacement/Adresse,
puis appuyez sur Entre sur le clavier.
Remarques
Pour ouvrir une invite de commande sous Windows : dans le menu Dmarrer, slectionnez Excuter et tapez
cmd. Cliquez sur OK.
Pour utiliser la commande ARP sur Mac OS X, utilisez l'utilitaire Terminal dans Application > Utilitaires.
Page 21
Connecteurs de l'unit
Connecteur de rseau - Connecteur Ethernet RJ-45. Prend en charge la technologie PoE
(Power over Ethernet). Il est recommand d'utiliser des cbles blinds.
Switch PoE - alimentation par Ethernet - norme IEEE 802.3af, classification configurable
concernant la consommation lectrique:
Classe 2: Aucune camra connecte ou une camra analogue connecte avec une consommation lectrique
jusqu' 1.4W
Classe 3: Une camra analogue connecte avec une consommation lectrique jusqu' 5.0W
Broches
Fonction
Broche
Spcifications
GND
Connecteur
12 Vcc
Charge maximale = 50 mA
Entre
numrique
Connectez-la au GND pour l'activer ou laissezla flotter (ou dconnecte) pour la dsactiver.
Sortie
transistor
Charge maximale = 50 mA
Tension maximale = 24 V CC
(vers le transistor)
Connecteur BNC - Connectez un cble vido coaxial de 75 ohms (d'une longueur maximale
de 250 mtres).
Mini-DIN - Connecteur Mini-DIN 6 broches pour sortie alimentation, entre vido et entre
audio :
Fonction
Broche
Sortie alimentation
Entre audio
Entre vido
GND
2,4,6
Connecteur Mini-DIN
6
4
2
5
3
1
FRANCAIS
1 sortie transistor : permet de connecter des dispositifs externes tels que les relais et les
1 2 3 4
DEL. Les dispositifs connects peuvent tre activs l'aide de l'API VAPIX AXIS, des boutons
de sortie sur la page Vido en direct ou l'aide d'un type d'vnement. La sortie est considre comme
tant active (dans Configuration d'vnement > tat du port) si le dispositif d'alarme est activ.
1 entre numrique : entre d'alarme utilise pour connecter des dispositifs pouvant passer d'un circuit
ouvert un circuit ferm, par exemple : les dtecteurs infrarouge passifs, les contacts de porte/fentre, les
dtecteurs de bris de verre, etc. Lorsqu'un signal est reu, l'tat change et l'entre devient active (elle
apparat sous Configuration d'vnement > tat du port).
FRANAIS
Connecteur pour terminaux E/S - Utilis dans les applications, par exemple
pour la dtection de mouvement, le dclenchement d'vnements,
l'enregistrement intervalles, les notifications d'alarme, etc.
Page 22
Entre Ligne/Mic - Entre 3,5 mm pour microphone mono ou entre de ligne pour signal
mono (le canal de gauche est utilis pour un signal stro).
Sortie alimentation - Sert alimenter une camra ou tout autre matriel
auxiliaire 12 V CC, intensit max. de 5 W (420 mA)
GND +
Important !
Ne connectez pas plusieurs sources vido/audio car l'AXIS 247S est un serveur vido monocanal qui ne peut
traiter qu'un seul flux vido/audio.
L'AXIS 247S peut fournir un maximum de 5 W (420 mA) une camra (sortie alimentation) et 50 mA partir
du connecteur pour terminaux E/S.
Tmoins DEL
Tmoin DEL
Couleur Indication
Rseau
Vert
Orange
tat
Alimentation
teint
Vert
Orange
Rouge
Vert
Fonctionnement normal.
Orange
Diagramme de connexion
AXIS 247S
1
12V
max. 50mA
2o
z
3o
4
Page 23
Plus d'informations
Le Manuel de l'utilisateur est disponible sur le site Web d'Axis, ou sur le CD du produit vido
rseau Axis fourni avec l'appareil.
Conseil :
Visitez le site www.axis.com/techsup pour vrifier si des microcodes mis jour sont
disponibles pour votre appareil AXIS 247S. Pour connatre la version du microcodes
actuellement installe, reportez-vous la page Web Basic Configuration
(Configuration de base) dans les outils de configuration du produit.
FRANCAIS
FRANAIS
Pour revenir aux paramtres par dfaut dfinis en usine et rinitialiser l'adresse IP, procdez
comme suit :
Seite 25
AXIS 247S
Installationsanleitung
In dieser Anleitung wird die Installation des AXIS 247S Videoservers in einem Netzwerk
beschrieben. Alle weiteren Hinweise zur Verwendung des Produkts finden Sie im
Benutzerhandbuch, das auf der mitgelieferten CD enthalten ist und auf unserer Webseite
unter www.axis.com/techsup zur Verfgung steht.
Installationsschritte
1. Prfen Sie, ob alle in der nachfolgenden Liste aufgefhrten Komponenten vorhanden
sind.
2. Hardwarebersicht (siehe Seite 26).
3. Hardware installieren (siehe Seite 26).
4. IP-Adresse festlegen (siehe Seite 27).
Wichtiger Hinweis!
5. Kennwort festlegen (siehe Seite 30).
Verwenden Sie dieses Produkt
nur gem den geltenden
rechtlichen Bestimmungen.
Komponente
Modelle/Varianten/Anmerkungen
Montagesatz
CD
Gedruckte
Dokumente
Sonderzubehr
Anschlusskabel
PoE Midspan
Wichtig!
Fr den Stromausgang und den Video- und Audioeingang stehen zwei alternative Anschlsse zur Verfgung,
die eine flexible Installation ermglichen. Schlieen Sie nicht mehr als eine Video- bzw. Audioquelle an, da
der AXIS 247S ein einkanaliger Videoserver ist und nur fr einen Video- bzw. Audiostream ausgelegt ist.
Der AXIS 247S bertrgt maximal 5 W (420 mA) zur Kamera (ber Stromausgang oder Mini-DIN-Anschluss)
und 50 mA ber den E/A-Anschluss.
DEUTSCH
Lieferumfang
Seite 26
Hardwarebersicht
Stromausgang
Videoeingang
Audioeingang
Videoeingang
Netzwerk
(PoE)
Stuertaste
PoE
Klasse 2/
E/A-AnschlussKlasse 3
leiste
Anzeige fr:
Netzwerk
Status
Betrieb
Line in/Mic
Stromausgang
Produktaufkleber enthlt:
Produkt- und Seriennummer (S/N).
Die Seriennummer wird u. U.
bei der Installation bentigt.
Hardware installieren
Im Lieferumfang des Axis-Videoservers ist ein
Montagesatz fr die Wandanbringung oder den
Rackeinbau enthalten. Die Halterungen knnen
so montiert werden, dass der Videoserver auf
einer senkrechten Flche angebracht oder in ein
Rack (4 HE) eingebaut werden kann. Gehen Sie
folgendermaen vor, um die Halterungen an
dem Videoserver anzubringen:
Seite 27
Kabel anschlieen
1. Verbinden Sie den Videoserver ber ein abgeschirmtes Netzwerkkabel mit dem Netzwerk.
Die Stromversorgung erfolgt ber das Netzwerkkabel (PoE).
2. Schlieen Sie den Videoausgang Ihrer Kamera mit einem Standard-Koaxial-Videokabel
(75 Ohm) mit BNC-Anschlssen an den AXIS 247S an.
3. Sie knnen zustzlich externe Ein- und Ausgabegerte wie Alarmanlagen anschlieen.
Informationen zur Anschlussbelegung finden Sie auf Seite 33.
4. Sie knnen zustzlich ein Mikrofon oder Line-In-Monosignal an den Line-In/Mic
Anschluss anschlieen.
5. berprfen Sie, ob die LED-Anzeigen den Betriebszustand korrekt anzeigen. Weitere
Informationen finden Sie in der Tabelle auf Seite 34.
Wichtig!
Der 6-polige Mini-DIN-Anschluss ist ein alternativer Anschluss fr den Stromausgang und den Video- und
Audioeingang. Schlieen Sie immer nur eine Videoquelle an den AXIS 247S an.
Wenn PoE von Ihrem Netzwerk Switch nicht untersttzt wird mssen Sie einen Midspan/Power Injector
verwenden um den AXIS 247S mit Strom zu versorgen.
IP-Adresse zuweisen
Von der Anzahl der zu installieren Videoserver hngt ab, ob die IP-Adressen unter Windows
mit Hilfe von AXIS IP Utility oder AXIS Camera Management zugewiesen werden sollten.
Verwenden Sie die Methode, die fr Ihren Zweck am besten geeignet ist.
Beide Anwendungen stehen kostenlos auf der mitgelieferten CD fr AxisNetzwerkvideoprodukte zur Verfgung oder knnen unter www.axis.com/techsup
heruntergeladen werden.
Methode
Empfohlen fr
Betriebssystem
AXIS IP Utility
Siehe Seite 28
Einzelne Videoserver
Kleine Installationen
Windows
Mehrere Videoserver
Groe Installationen
Installation in einem anderen Subnetz
Windows 2000
Windows XP Pro
Windows 2003 Server
Hinweise:
DEUTSCH
Um die Kommunikation mit dem Netzwerk zu ermglichen, muss dem AXIS 247S eine IPAdresse zugewiesen werden.
Seite 28
Beachten Sie, dass sich der AXIS 247S und der Computer, auf dem AXIS IP Utility
ausgefhrt wird, im gleichen Netzwerksegment (d. h. physischen Subnetz) befinden mssen.
Automatische Erkennung
1. Stellen Sie sicher, dass der AXIS 247S an das Netzwerk und die Stromversorgung angeschlossen ist.
2. Starten Sie AXIS IP Utility.
3. Doppelklicken Sie auf das Symbol de Videoservers, um die entsprechende Startseite zu
ffnen.
4. Anweisungen zum Festlegen des Kennworts finden Sie auf Seite 30.
Seite 29
DEUTSCH
1. Stellen Sie sicher, dass der Videoserver an das Netzwerk und die Stromversorgung angeschlossen ist.
2. Starten Sie AXIS Camera Management. Doppelklicken Sie auf das Symbol des AXIS
247S, um die Startseite des Videoservers zu ffnen.
3. Anweisungen zum Festlegen des Kennworts finden Sie auf Seite 30.
Seite 30
Kennwort festlegen
Beim erstmaligen Zugriff auf den AXIS 247S
wird das Dialogfeld Configure Root Password
(Root-Kennwort konfigurieren) angezeigt.
1. Geben Sie ein Kennwort ein, und wiederholen Sie die Eingabe, um die korrekte
Schreibweise zu besttigen. Klicken Sie auf
OK.
2. Geben Sie im Dialogfeld den Benutzernamen root" ein.
Hinweis: Der vorgegebene Administrator-Benutzername root kann nicht gelscht
werden.
3. Geben Sie das zuvor festgelegte Kennwort ein, und klicken Sie auf OK. Wenn Sie das
Kennwort vergessen haben, muss der AXIS 247S auf die Werkseinstellungen
zurckgesetzt werden (siehe Seite 35).
4. Klicken Sie auf Yes (Ja), um AMC (AXIS Media Control) zu installieren. Nach Abschluss
der Installation knnen Sie Video-Streams in Microsoft Internet Explorer anzeigen. Zur
Installation mssen Sie ber Administratorrechte fr den Computer verfgen.
Die Seite Direktbertragung des AXIS 247S wird angezeigt. Sie enthlt Links zu SetupTools, mit denen Sie die Konfiguration durchfhren knnen.
Setup: Alle Tools zur benutzerspezifischen
Konfiguration des Videoservers.
Hilfe: Aufrufen
der Online-Hilfe
fr den
Videoserver.
Seite 31
UPnP
Windows
(ME oder XP)
Wenn die Funktion auf dem Computer aktiviert ist, wird der
Videoserver automatisch erkannt und zur Netzwerkumgebung
hinzugefgt.
Bonjour
MAC OS X
(ab Vers. 10.4)
Alle
Ein kostenloser Service von Axis, mit dem Sie Ihren Videoserver
schnell und einfach installieren knnen. Voraussetzung ist eine
Internetverbindung ohne HTTP-Proxyserver. Weitere
Informationen hierzu finden Sie unter www.axiscam.net.
ARP/Ping
Alle
Admin-Seiten des
DHCP-Servers
anzeigen
Alle
Hinweise zum Anzeigen der Administrationsseiten des DHCPServers im Netzwerk finden Sie in der Serverdokumentation.
DEUTSCH
Verwendung im
Betriebssystem
Seite 32
Beispiel fr Windows
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
Beispiel fr UNIX/Linux/Mac
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
4. Stellen Sie sicher, dass das Netzwerkkabel mit dem Videoserver verbunden ist, und
starten Sie den Videoserver bzw. starten Sie diesen neu, indem Sie die Stromversorgung
unterbrechen und wiederherstellen.
5. Schlieen Sie die Eingabeaufforderung, sobald Reply from 192.168.0.125: ... oder eine
hnliche Antwort angezeigt wird.
6. Starten Sie einen Browser, geben Sie im Adressfeld http://<IP-Adresse> ein, und
drcken Sie die Eingabetaste.
Hinweise:
So ffnen Sie die Eingabeaufforderung unter Windows: Whlen Sie Ausfhren... im Startmen, und geben
Sie cmd ein. Klicken Sie auf OK.
Verwenden Sie zum Eingeben des Befehls ARP unter Mac OS X das Dienstprogramm Terminal, das Sie
unter Anwendung > Dienstprogramme finden.
Seite 33
Videoserveranschlsse
Netzwerkanschluss - RJ-45-Ethernetanschluss. Untersttzt PoE (Power over Ethernet). Die
Verwendung von abgeschirmten Kabeln wird empfohlen.
PoE Switch - Power over Ethernet (IEEE 802.3af) whlbare PoE Klasse:
Klasse 2 keine angeschlossene Kamera oder analoge Kamera mit einem Stromverbrauch von bis zu
1.4W
Klasse 3 angeschlossene analoge Kamera mit Stromverbrauch von bis zu 5.0W
Kontaktstifte
Funktion
Kontakt
Technische Daten
Masse
Stromaus
gang
12 V Gleichstrom
max. Stromstrke = 50 mA
Digitaler
Eingang
Transistor
ausgang
Kontakt
Stromausgang
Audioeingang
Videoeingang
Masse
2,4,6
Mini-DIN-Anschluss
6
4
2
5
3
1
DEUTSCH
1 Transistorausgang: Zum Anschluss externer Gerte wie Relais und LED. Die
1 2 3 4
angeschlossenen Gerte knnen mit Hilfe der AXIS VAPIX API, der
Ausgangsschaltflchen auf der Seite Direktbertragung oder durch einen
Ereignistyp aktiviert werden. Der Ausgang wird unter Event Configuration (Ereigniskonfiguration)
> Port Status (Port-Status) als aktiviert angezeigt, wenn das Alarm meldende Gert eingeschaltet
ist.
1 digitaler Eingang: Alarmeingang zum Anschluss von Gerten, die zwischen geffnetem und
geschlossenem Schaltkreis wechseln knnen, z. B.: PIR-Kameras, Tr-/Fensterkontakte,
Glasbruchmelder usw. Bei Empfang eines Signals ndert sich der Status, und der Eingang wird
aktiviert (angezeigt unter Event Configuration (Ereigniskonfiguration) > Port Status (Port-Status)).
Seite 34
Wichtig!
Schlieen Sie nicht mehr als eine Video- bzw. Audioquelle an, da der AXIS 247S ein einkanaliger Videoserver
ist und nur fr einen Video- bzw. Audiostream ausgelegt ist.
Der AXIS 247S bertrgt maximal 5 W (420 mA) zur Kamera (Stromausgang) und 50 mA ber die E/AAnschlussleiste.
Anschlussschaltbild
AXIS 247S
1
12 V
max. 50 mA
z. B. Taster
2o
z
3o
4
LED-Anzeigen
LED
Farbe
Bedeutung
Netzwerk
Grn
Gelb
Leuchtet nicht
Keine Netzwerkverbindung.
Status
Betrieb
Grn
Gelb
Rot
Blinkt langsam, wenn bei der Aktualisierung ein Fehler aufgetreten ist.
Grn
Normalbetrieb.
Gelb
Seite 35
Weitere Informationen
Das Benutzerhandbuch ist auf der Axis-Website unter www.axis.com erhltlich und befindet
sich auch auf der mitgelieferten CD fr Axis-Netzwerkvideoprodukte.
Tipp!
Unter www.axis.com/techsup finden Sie Firmware-Aktualisierungen fr Ihren AXIS
247S. Gehen Sie unter Setup-Tools auf die Seite Standardkonfiguration, um die
aktuelle Firmware-Version anzuzeigen.
DEUTSCH
Pagina 37
AXIS 247S
Guida all'installazione
Nel presente documento vengono fornite le istruzioni per installare il dispositivo Video
Server AXIS 247S in rete. Per tutti gli altri aspetti sullutilizzo del prodotto, vedere il
Manuale per lutente disponibile sul CD incluso nella confezione oppure allindirizzo
www.axis.com/techsup
Procedura di installazione
1.
2.
3.
4.
5.
Modello/varianti/note
Kit di montaggio
CD
Accessori opzionali
Cavo di collegamento
Cavo con connettore mini-DIN a 6 pin per ingresso audio e video e uscita di
alimentazione
Midspan PoE
Importante
Sono disponibili due tipi di collegamento alternativi per l'uscita di alimentazione, l'ingresso video e audio, che
garantiscono flessibilit di installazione. Non collegare pi di una sorgente video/audio poich il dispositivo
AXIS 247S un video server a un canale e pu supportare un flusso video/audio.
Il dispositivo AXIS 247S pu fornire un massimo di 5 W (420mA) a una videocamera (dall'uscita di
alimentazione o dal connettore mini-DIN) e 50mA dalla morsettiera di alimentazione I/O.
ITALIANO
Morsettieri di
alimentazione
Pagina 38
Panoramica dellhardware
Uscita di alimentazione
Ingresso video
Ingresso audio
Ingresso video
Rete
(PoE)
Interruttore da 75 Ohm
Line/Mic
Uscita di
in
alimentazione
L'etichetta del prodotto include:
ID del prodotto e numero di serie (S/N).
Il numero di serie potrebbe essere
richiesto durante l'installazione.
Pulsante
PoE
Classe 2/ Control
Morsettiera di
Classe 3
alimentazione
I/O
Indicatori per:
Rete
Stato
Alimentazione
Installazione dell'hardware
Il dispositivo Server video Axis comprende un
kit per montaggio a parete o su rack. Le staffe
possono essere posizionate per montare il
server video su una superficie verticale o in un
armadio rack. Per collegare le staffe al server
video, seguire le istruzioni riportate di seguito.
Alloggiamento per
piastra e staffa
in metallo
Telaio grigio
Piastra
in metallo
Staffa
Pagina 39
Importante
Il connettore mini-DIN a 6 pin un collegamento alternativo per l'uscita di
alimentazione, l'ingresso video e audio. Non collegare pi di una sorgente video al
dispositivo AXIS 247S.
Se l'alimentazione PoE non supportata dall'interruttore di rete, collegare
l'alimentazione al dispositivo AXIS 247S mediante il midspan PoE/power injector.
Assegnazione di un indirizzo IP
Entrambe le applicazioni sono disponibili gratuitamente sul CD del prodotto oppure possono
essere scaricate dal sito Web allindirizzo www.axis.com/techsup.
Metodo
Consigliato per
Sistema operativo
AXIS IP Utility
Vedere pagina 40
Windows
Pi video server
Grandi installazioni
Installazione in una subnet differente
Windows 2000
Windows XP Pro
Windows 2003 Server
Note
Lutilizzo di un server DHCP di rete facoltativo.
Lindirizzo IP predefinito per il dispositivo AXIS 247S 192.168.0.90
Se l'indirizzo IP non viene assegnato correttamente, verificare che non siano presenti firewall a
bloccare loperazione.
Per altri metodi di assegnazione o di rilevazione dellindirizzo IP per il dispositivo AXIS 247S, ad
esempio in altri sistemi operativi, vedere pagina 43.
ITALIANO
Pagina 40
Si tenga presente che il dispositivo AXIS 247S deve essere installato sullo stesso segmento di
rete (subnet fisica) del computer sul quale in esecuzione AXIS IP Utility.
Rilevamento automatico
1. Verificare che il dispositivo AXIS 247S sia collegato in rete e alimentato correttamente.
2. Avviare AXIS IP Utility.
3. Quando il video server verr visualizzata, fare doppio clic su di essa per aprire la home
page.
4. Vedere pagina 42 per istruzioni su come assegnare la password.
Pagina 41
1. Selezionare i dispositivi che si desidera configurare (anche differenti modelli) e fare clic
sul pulsante Assign IP.
2. Selezionare Obtain IP addresses automatically (DHCP), fare clic sul pulsante Update;
verr eseguita una ricerca nell'intervallo specifico, quindi verr suggerito un indirizzo IP
per ciascun dispositivo.
-oppure Immettere l'intervallo di indirizzi IP, la subnet mask e il router predefinito per i
dispositivi e fare clic sul pulsante Update.
ITALIANO
Pagina 42
Help: visualizza
la Guida in linea
relativa alla
modalit di
utilizzo del video
server.
Pagina 43
Note
UPnP
Windows
(ME o XP)
Bonjour
MAC OSX
(10.4 o versione
successiva)
Servizio AXIS
Dynamic DNS
Tutti
ARP/Ping
Tutti
Tutti
Visualizzazione
delle pagine di
amministrazione del
server DHCP
ITALIANO
Pagina 44
Sintassi di UNIX/Linux/Mac
arp -s <Indirizzo IP> <Numero di serie> temp
ping -s 408 <Indirizzo IP>
Esempio di UNIX/Linux/Mac
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
4. Verificare che il cavo di rete sia connesso al video server e quindi avviare/riavviare il
video server, scollegando e ricollegando lalimentazione.
5. Chiudere il prompt dei comandi una volta visualizzato il messaggio "Risposta da
192.168.0.125: ... oppure un messaggio simile.
6. Nel browser immettere http://<indirizzo IP> nel campo del percorso/indirizzo e premere
Invio.
Note
Per aprire un prompt dei comandi in Windows: dal menu Start, selezionare Esegui... e digitare cmd. Fare clic
su OK.
Per utilizzare il comando ARP su un sistema operativo Mac OS X, servirsi dell'utilit Terminal, in Applicazioni
> Utilit.
Pagina 45
Connettori
Connettore di rete - connettore Ethernet RJ-45. Supporta PoE (Power over Ethernet). Si
consiglia luso di cavi schermati.
Switch PoE - Power over Ethernet (IEEE 802.3af), classificazione di alimentazione
selezionabile:
Classe 2 - nessuna connessione a telecamere oppure telecamera analogica collegata che
consumi fino a 1.4W.
Classe 3 - telecamera analogica collegata che consumi fino a 5.0W
Morsettiera di alimentazione I/O - utilizzata per varie applicazioni come, ad
Pin
esempio, la rilevazione del movimento, lattivazione di eventi, la
registrazione continua, la notifica di allarmi:
1 uscita transistor: consente di connettere dispositivi esterni, quali rel e
1 2 3 4
LED. I dispositivi collegati possono essere attivati mediante AXIS VAPIX
API, i pulsanti di controllo delle uscite nella pagina Live View o da un
tipo di evento. Luscita verr visualizzata come attiva (visualizzata in Event
Configuration >Port Status) se il dispositivo di allarme attivato.
1 ingresso digitale: specifico per allarmi, consente di connettere dispositivi che possono
aprire o chiudere un circuito, ad esempio: sensori di movimento (PIR), contatti porta/
finestra, rilevatori di rottura vetri e cos via. Quando viene ricevuto il segnale lo stato
cambia e lingresso diventa attivo (visualizzato in Event Configuration > Port Status).
Funzione
Pin
Specifiche
Alimentazione
12V CC
Carico massimo = 50 mA
Ingresso
digitale
Uscita
transistor
Carico massimo = 50 mA
Tensione massima = 24V
CC
(al transistor)
Connettore BNC - collegare un cavo video coassiale da 75 ohm (lunghezza massima 250m).
Mini-DIN - connettore mini-DIN a 6 pin per uscita di alimentazione, ingresso video e audio.
Funzione
Pin
Uscita di alimentazione
Ingresso audio
Ingresso video
GND
2,4,6
Connettore mini-DIN
6
4
2
5
3
1
ITALIANO
GND
Pagina 46
Line/Mic in - 3,5 mm di ingresso per un microfono mono o per un segnale mono line-in
(canale di sinistra utilizzato per un segnale stereo).
Uscita di alimentazione - utilizzata per alimentare une videocamera o un
altro dispositivo ausiliario 12 V CC, carico massimo 5 W (420mA)
GND +
Importante
Non collegare pi di una sorgente video/audio poich il dispositivo AXIS 247S un
server video a un canale e pu supportare un flusso video/audio.
Il dispositivo AXIS 247S pu fornire un massimo di 5 W (420mA) a una videocamera
(dall'uscita di alimentazione) e 50mA dalla morsettiera di alimentazione I/O.
2o
z
3o
4
Indicatori LED
LED
Rete
Stato
Colore
Indicazione
Verde
Luce fissa: connessione di rete a 100 Mbit/s. Luce lampeggiante: attivit di rete.
Giallo
Spia spenta
Verde
Giallo
Rosso
Alimentazione Verde
Giallo
Normale utilizzo.
Luce lampeggiante verde/gialla: aggiornamento firmware.
Pagina 47
Ulteriori informazioni
Il Manuale per lutente disponibile sul sito Web di Axis allindirizzo www.axis.com oppure
sul CD fornito con il prodotto.
ITALIANO
Suggerimento
Visitare il sito Web Axis all'indirizzo www.axis.com/techsup per verificare se sono
stati pubblicati aggiornamenti del firmware per il dispositivo AXIS 247S. Per
conoscere la versione installata del firmware, vedere la pagina di configurazione
base negli strumenti di configurazione.
Pgina 49
AXIS 247S
Gua de instalacin
Esta gua de instalacin incluye las instrucciones necesarias para instalar el Servidor de
vdeo AXIS 247S en su red. Para obtener informacin sobre cualquier cuestin relacionada
con el uso del producto, consulte el Manual del usuario, disponible en el CD que se incluye
en este paquete o en la pgina www.axis.com/techsup.
Pasos de instalacin
1.
2.
3.
4.
5.
Modelos/variantes/notas
CD
Material impreso
Accesorio opcional
Cable de conexin
Cable con conector Mini-DIN de 6 pines para entrada de vdeo, entrada de audio y
salida de alimentacin
Importante:
Hay dos conexiones alternativas disponibles para salida de alimentacin, entrada de vdeo y entrada de audio,
lo que aade flexibilidad a la instalacin. No conecte ms de una seal de vdeo/audio, ya que el AXIS 247S es
un servidor de vdeo de un canal y solo es capaz de gestionar un flujo de vdeo/audio.
El AXIS 247S puede proporcionar una potencia mxima de 5 W (420 mA) a una cmara (por la salida de
alimentacin o por el conector Mini-DIN) y 50 mA en el conector del terminal de E/S.
ESPAOL
Kit de montaje
Pgina 50
Entrada de vdeo
Red
(PoE)
Conmutador de 75 ohmios
Entrada de
lnea/micrfono
Salida de alimentacin
En la etiqueta se indica:
ID y nmero de serie (N/S) del producto.
Es posible que necesite el nmero de serie
durante la instalacin.
PoE
Clase 2/
Clase 3
Botn de
Indicadores de:
control
red
Conector del
estado
terminal de E/S
limentacin
Marco gris
Placa metlica
Soporte de montaje
Pgina 51
Importante:
El conector Mini-DIN de 6 pines es otra posibilidad de conexin para salida de alimentacin,
entrada de vdeo y entrada de audio. No conecte ms de una seal de vdeo al AXIS 247S.
Si el conmutador de red no es compatible con PoE, utilice la Toma intermedia PoE/power
injector para proporcionar alimentacin al AXIS 247S.
Sistema operativo
AXIS IP Utility
Consulte la pgina 52
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Notas:
ESPAOL
Mtodo
Pgina 52
AXIS IP Utility:
para servidor individuales o instalaciones pequeas
AXIS IP Utility encuentra y muestra automticamente los dispositivos Axis que existen en la
red. Adems, puede utilizarse para fijar manualmente una direccin IP esttica.
Recuerde que el equipo que ejecute AXIS IP Utility debe instalarse en el mismo segmento de
red (subred fsica) que el AXIS 247S.
Deteccin automtica
1. Compruebe que el AXIS 247S est conectado a la red y que recibe alimentacin.
2. Inicie AXIS IP Utility.
3. Cuando el servidor de vdeo aparezca en la ventana, haga doble clic en ella para abrir su
pgina de inicio.
4. Consulte la pgina 54 para obtener instrucciones sobre cmo asignar la contrasea.
Pgina 53
ESPAOL
1. Seleccione los dispositivos que desee configurar (se pueden seleccionar varios modelos) y
haga clic en el botn Assign IP (Asignar IP).
2. Seleccione Obtain IP addresses automatically (Obtener direcciones IP automticamente)
(DHCP), haga clic en el botn Update (Actualizar) y el programa iniciar la bsqueda en
el intervalo especificado y sugerir una direccin IP para cada dispositivo;
o bien
introduzca el intervalo de direcciones IP, la mscara de subred y el encaminador
predeterminado que pueden utilizar los dispositivos, y haga clic en el botn Update.
Pgina 54
Configuracin de la contrasea
Al acceder al AXIS 247S por primera vez,
aparecer el cuadro de dilogo Configure Root
Password (Configurar contrasea de root).
1. A continuacin, escriba una contrasea y
vuelva a escribirla para confirmarla. Haga
clic en Aceptar.
2. Escriba el nombre de usuario root en el
cuadro de dilogo.
Nota: El nombre de usuario predeterminado para el administrador root no se puede
borrar.
3. Escriba la contrasea que introdujo anteriormente y haga clic en Aceptar. Si ha
extraviado u olvidado la contrasea, deber restablecer el AXIS 247S a los valores
iniciales. Consulte la pgina 58.
4. En caso necesario, haga clic en S para instalar el AMC (AXIS Media Control) y as
permitir la visualizacin del flujo de vdeo continuo en Internet Explorer. Para ello, debe
tener derechos de administrador en su ordenador.
La pgina Live View (En vivo) del AXIS 247S aparece con enlaces a las herramientas de
configuracin que le permiten personalizar el servidor.
Setup (Configuracin): proporciona todas las herramientas
para configurar el servidor de vdeo segn sus necesidades.
Help (Ayuda):
presenta ayuda
en lnea sobre
todos los
aspectos del uso
del servidor de
vdeo.
Pgina 55
Notas
UPnP
Windows
(ME o XP)
Bonjour
MAC OSX
(10.4 o posterior)
AXIS Dynamic
DNS Service
Todos
ARP/Ping
Todos
Todos
Las pginas de
administracin
del servidor DHCP
Comando de UNIX/Linux/Mac
Ejemplo de UNIX/Linux/Mac
4. Compruebe que el cable de red est conectado al servidor de vdeo y desconecte y vuelva a
conectar la alimentacin para iniciarla o reiniciarla.
5. Cierre la lnea de comando cuando vea Reply from 192.168.0.125: ... o similar.
6. En el explorador, escriba http://<direccin IP> en el campo Ubicacin/Direccin y pulse Intro
en el teclado.
Notas:
Para abrir una lnea de comandos en Windows: desde el men Inicio, seleccione Ejecutar y escriba cmd.
Haga clic en Aceptar.
Para utilizar el comando ARP en un sistema operativo Mac OS X, utilice la herramienta Terminal, que se
encuentra en Aplicaciones > Utilidades.
ESPAOL
Comando de Windows:
Pgina 56
Conectores
Conector de red - Conector Ethernet RJ-45. Compatible con Power over Ethernet. Se
recomienda emplear cables blindados.
Switch PoE - Power over Ethernet (IEEE.8023af) seleccin de clasificacin de poder:
Clase 2 - no cmara conectada o una cmara analgica conectada con consumo mximo de
poder de hasta 1.4W.
Clase 3 Cmara analgica conectada con un consumo mximo de hasta 5.0W
Conector del terminal de E/S - Se utiliza en aplicaciones de, por ejemplo,
deteccin de movimiento, activacin de eventos, grabacin de intervalos de
tiempo y notificaciones de alarma:
Pines
1 salida por transistor: para conectar dispositivos externos como rels y LED.
1 2 3 4
Los dispositivos conectados se pueden activar mediante la API VAPIX de AXIS,
los botones de salida de la pgina Live View o mediante un tipo de evento. La salida se
mostrar activa (indicado en Event Configuration [Configuracin de eventos] > Port Status
[Estado del puerto]) si el dispositivo de alarma est activado.
1 entrada digital: una entrada de alarma para conectar dispositivos que puedan alternar
circuitos cerrados y abiertos, como detectores PIR, contactos de puertas y ventanas, detectores
de rotura de cristales, etc. Cuando se recibe una seal, el estado cambia y la entrada se vuelve
activa (indicado en Event Configuration [Configuracin de eventos] > Port Status [Estado
del puerto]).
Funcin
Pin
Especificaciones
GND
Alimentacin
Entrada
digital
Salida de
transistor
Carga mx. = 50 mA
Voltaje mx. = 24 V CC
(al transistor)
Conector BNC - Conecte un cable de vdeo coaxial de 75 ohmios (longitud mxima: 250m).
Mini-DIN - Conector Mini-DIN de 6 pines para salida de alimentacin, entrada de vdeo y
entrada de audio:
Funcin
Pin
Salida de alimentacin
Entrada de audio
Entrada de vdeo
GND
2, 4, 6
Tierra en pines 2, 4 y 6.
Conector Mini-DIN
6
4
2
5
3
1
Pgina 57
GND +
Importante:
No conecte ms de una fuente de vdeo/audio, ya que el AXIS 247S es un servidor de vdeo de
un canal y solo es capaz de gestionar un flujo continuo de vdeo/audio.
El AXIS 247S puede proporcionar una potencia mxima de 5 W (420 mA) a una cmara (por la
salida de alimentacin) y 50 mA en el conector del terminal de E/S.
Diagrama de conexiones
AXIS 247S
1
12 V
mx. 50 mA
p. ej., pulsador
2o
z
3o
4
LED
Color
Indicacin
Red
Verde
Fijo para indicar conexin a una red de 100 Mbit/s. Parpadeo para indicar
actividad de red.
mbar
Fijo para indicar conexin a una red de 10 Mbit/s. Parpadeo para indicar
actividad de red.
Apagado
Estado
Alimentacin
Verde
mbar
Rojo
Verde
Funcionamiento normal.
mbar
ESPAOL
Indicadores LED
Pgina 58
Ms informacin
Puede acceder al Manual del usuario en la pgina Web de Axis www.axis.com, o bien en el
CD sobre el producto de vdeo de red de Axis incluido con este producto.
Sugerencia:
Entre en www.axis.com/techsup para comprobar si hay firmware actualizado
disponible para el AXIS 247S. Para ver la versin de firmware que se encuentra
instalada en ese momento, consulte la pgina Web Basic Configuration
(Configuracin bsica) en las herramientas de configuracin del producto.
October 2007