Professional Documents
Culture Documents
,,
Maximum thickness
Materials,
reinforcements
and linings
There is no constraint.
Greater thickness
leads to
P.U.
Reinforcements
an increased stiffness,
so
Scrap
It must be allowed by
the
initial
Minimum thickness
0,8 mm
Optimum thickness
Salpa/Leather Paper
Enforcement
Non-woven fabric
Salpa is applied
mainly in the mouth of
the Handbag but it can
be also used at the
bottom. The required
thickness is: 0,4mm,
0,6mm, 0,8mm or
1mm.
Handle
reinforcements
Foam is used in order to
improve suavity and
achieve the desired
body construction. The
supplier should use
foam with: 0,8mm,
1,5mm, 2mm, 2,5mm or
3mm depending on the
design.
EVA
Two types of
reinforcements can be
used: rope when the aim
is to achieve suavity and
rubber in order to
enhance stiffness.
Thickness
specifications for handle
reinforcements are:
8mm,
Linings
PARFOIS is working on a
standard linning for all
suppliers.
Metal accessories
Maximum thickness
P.U.
Minimum thickness
Optimum thickness
Parfois
0,6mm,
0,8mm, 1mm
1,2mm.
Parfois
6mm
PU
PARFOIS 100g,
150g , 200g/.
EVA
2mm,
2,5mm 3mm
EVA
8MM 10MM 12MM
70g/
30% 70%
Salpa
0,4mm,
0,6mm, 0,8mm
1mm.
PARFOIS