Professional Documents
Culture Documents
The Quick Start Tutorial is a simple introductory tutorial which will get the us
er familiar with some of the basic modeling and data interpretation features of
Slide.
The model represents a homogeneous, single material slope, with no groundwater p
ore pressure (dry). A grid search for circular slip surfaces will be performed i
n order to locate the circular slip surface with the minimum safety factor.
Tutorial 02 - Materials and Loading
This tutorial will demonstrate how to model a multi-material slope with a weak l
ayer. A water table is used to model pore pressure, and a uniform distributed lo
ad is applied at the crest of the slope. A grid search for circular slip surface
s will be performed in order to locate the circular slip surface with the minimu
m safety factor.
Tutorial 03 - Non-Circular Surfaces
This tutorial will use the same model as Tutorial 02 Materials & Loading, to dem
onstrate how an analysis can be performed using non-circular (piece-wise linear)
slip surfaces. The model features a weak layer, pore pressure defined by a wate
r table and a uniform distributed load. A Block Search will be used to search fo
r the critical non-circular slip surface.
Tutorial 04 - Composite Surfaces
This tutorial will use the same model as Tutorial 02 Materials & Loading (with s
ome modifications), to demonstrate how to perform a circular surface search whic
h allows composite circular / non-circular surfaces to be analyzed. For this mod
el, it will be assumed that the material below the weak layer is impenetrable (e
.g. bedrock or soil with much higher strength).
Tutorial 05 - Water Pressure Grid
This tutorial will demonstrate how to use a water pressure grid to model pore wa
ter pressure in Slide. Water pressure grid data can be obtained from piezometer
measurements, flow nets, or the results of a groundwater seepage analysis.
Tutorial 06 - Support Tutorial
Various types of slope reinforcement can be modeled in Slide, including geo-text
iles, soil nails, tiebacks and rock bolts. This tutorial will demonstrate the mo
deling of grouted tieback support in Slide and interpretation of the analysis re
sults. The slope will first be analyzed without support, and then support will b
e added and the analysis re-run.
Tutorial 07 - Finite Element Groundwater Seepage
Slide has the capability to carry out a finite element groundwater seepage analy
sis, for steady state or transient flow conditions.
This tutorial demonstrates the basic features of performing a steady state groun
dwater seepage analysis with Slide, and how this functionality is fully integrat
ed with the slope stability analysis.
The seepage analysis capability in Slide can also be used as a standalone ground
water program, independently of the slope stability analysis functionality of Sl
ide.
Tutorial 08 - Probabilistic Analysis
This tutorial will familiarize the user with the basic probabilistic analysis ca
pabilities of Slide. Cohesion, friction angle and unit weight will be defined as
random variables, and the probabilistic analysis will be carried out for the (d
eterministic) Global Minimum slip surface.
Tutorial 09 - Sensitivity Analysis
A sensitivity analysis allows you to determine the sensitivity of the safety fac
tor to changes in the values of individual input parameters. This tutorial uses