Professional Documents
Culture Documents
P2.2
Criteria Achieved
P2.3
P2.4
P2.5
M3
D2
(This front sheet must be completed by the STUDENT where appropriate and included with the work submitted for assessment)
Students Name:
Assessors Name:
Issued date :
Qualification
Completion Date
Submitted on:
Group:
Unit No.:
Unit Title:
Engineering Design
Outcome No. :
Outcome Title:
Assignment No.:
Assessment Title:
In this assessment you will have opportunities to provide evidence against the following criteria. Indicate the page numbers
where the evidence can be found
Grading
To achieve the criteria the evidence must show that the student is able to:
P2.1
P2.2
P2.3
P2.4
P2.5
M3
D2
Tick
if met
Page
numbers
Declaration
I certify that this assignment is my own work, written in my own words. Any other persons work included in my
assignment is referenced / acknowledged.
Students Name:
Students Signature:
1 | 10
Date:
Date
5/2
Assessment Tasks
Assume that you have to manufacture one of following products (Table below) by using the
workshop machines. A range of manufacturing process such as, Casting, forging ,fabrications
and metal forming are assumed to be used to produce the following components:No
1
2
3
4
5
6
Product
tyre rim
Braking shoe
pulley
Connecting rod
Disk brake
Suspension arm
Select one of the above components and create the design process at minimum cost and make
the following tasks
Task (1)
Produce an analysis of possible design solutions
(P2.1)
Task (2)
(P2.2)
Produce conceptual designs for the chosen product (two or more) and put the
evaluation matrix using as your norm, and rank all the remaining design solutions.
Task (3)
Select the optimum design solution and why.
(P2.3)
Task (4)
(D2)
Manage and organize to produce the (TPP) Technological Procedure planning of
your optimum design and Take in consideration the following points: Steps of operation.
Shape of the work piece at each operation.
Name of the machine tool for each operation.
Determine the working conditioning for each operation.
Task (6)
(P2.4)
Carry a visit to the workshop in the training sector to be sure of compliance check for
the chosen design process of your optimum design
Task (7)
(P2.5)
Using standard format to prepare a final design report for your chosen product
2 | 10
5/2
Task (8)
(M3)
Present and communicate how to using standard format to prepare a final design
report for your chosen product.
Take in consideration the following points: Select the appropriate technical words.
You will present to the subject in front of familiar and unfamiliar.
3 | 10
5/2
4 | 10
5/2
5 | 10
5/2
6 | 10
5/2
7 | 10
5/2
8 | 10
5/2
9 | 10
5/1
Assessment feedback
(This feedback sheet must be completed by the ASSESSOR where appropriate)
Students Name:
Group:
Assessment Title:
Unit No.:
Unit Title:
Engineering Design
Outcome No.:
Outcome Title:
Criteria Achieved
Assignment No.:
Grading
P2.1
P2.2
P2.3
Assessment Criteria
Achieved
Evidence
Yes/No
P2.2
Yes/No
P2.3
Yes/No
P2.4
Yes/No
Practical and
photo graphics
P2.5
Yes/No
Writing task
Yes/No
Power point
Yes/No
TPP model
D2
P2.5
D2
Comments/feedback
Writing task
Assessors Name:
Signature:
Date:
Students Comments:
Students Name:
Signature:
Date
10 | 10
M3
P2.1
M3
P2.4
IVs Signature
Date