You are on page 1of 20

Attachment 1

Curriculum Vitae of Engineers

Shigehiro Tahara

Curriculum Vitae

Pharmaceutical Project Manager and GMP Senior


engineer
Qualifications
A first-class plumbing supervisor, logistics
supervisor, and type II information technology
engineer
Positions
COO of CMP Singapore and Director of CMP Vietnam.
Born in 1957, Shigehiro Tahara joined JGC Corporation in 1982, where he
served until February 2008 before joining CM Plus in March of the same year.
He became Director of CM Plus in July 2008. At JGC, Tahara gained wideranging knowledge and experience in production facility management,
working on various projects including design and test-runs of overseas oil
refineries and LNG plants, design of chemical engineering processes,
construction of domestic logistics facilities, and management of
pharmaceutical production facilities.
He went on to specialize in pharmaceutical plant projects (mainly those
involving aseptic drug manufacturing). Having acquireDHGroficiency in
process design, conceptual design, basic design, supervision of detailed
design and construction, pilot runs, validation (IQ/CQ), PJ management, GMP
diagnosis and consultancy, he became a leading expert in pharmaceutical
engineering at JGC.
In 1995, Tahara became a member of the technical education commission of
the Japan Chapter of the Parenteral Drug Association (PDA). He has
established anDHGatented a design process for facilities that handle
chemical hazards. His engineering expertise and knowledge of good
manufacturing practice (GMP) for aseptic drug manufacturing facilities and
chemical hazard handling facilities is widely respected.
Tahara is licensed as a first-class plumbing supervisor, logistics supervisor,
and type II information technology engineer.
Careers
1982

Joined JGC Corporation. Worked at design section for oil


refinery/LNG plant relateDHGrojects (Mainly off-site).

19891994

Engaged in plant design and logistics planning and


commissioning for the general industry, such as foods,
drugs and electronics, etc.

19952000

Engaged in basic design, detail design supervision,


design coordination, commissioning and validation for
sterile preparation facility (mainly for the formulation
and WFP equipment including CIP and SIP).

20002005

Engaged in planning, execution, management,


schedule control and cost control for sterile
1

Curriculum Vitae

formulation plant projects.


20052008

Worked as engineer for GMP diagnosis in


pharmaceutical industry and as lecturer for GMP
training, also worked in charge of validation planning,
implementation, management as well as a schedule
controller and cost controller.

March, 2008

Joined in CM Plus Corporation, became a director in


June the same year.

20082011

Worked as PMr, EMr of various projects such as SOD,


sterile, high active products manufacture. Also, Engage
in engineering and validation for medical device
production facilities.

2011present

As a sub-chief of GMPPlatform Services,


programming the GMP Education and Various
consultation services associated with GMP. He is in
particular specialized in GMP and QSR.

Apr. 2014

Relinquished the post as Director of CM Plus


Corporation and simultaneously was appointed as COO
of the CM PlusSingapore, as well as the Director of
PlusVietnam.

Curriculum Vitae

Name : Osamu TAKAHASHI


GMP Senior Consultant, CM Plus Corporation
Area of Expertise :

Pharmaceutical Quality System,


especially for chemical APIs

Qualification : PhD (engineering),


APIC Certified Auditor (valid until Apr 2017),
Hazardous Materials Engineer (Japan)
Language :

Japanese (mother tongue), English (practical)

Education and Employment


1987 Finished PhD course for Chemical Technology at Tokyo Institute of Technology.
Joined Nippon Mining Co., Ltd. (current JX Nippon Oil & Energy Corporation), and
assigned Bioscience Research Laboratories.
2002 Transferred to Sumitomo Pharmaceuticals Co., Ltd. (current Dainippon Sumitomo Pharma
Co., Ltd.), and assigned Corporate Quality Assurance.
2006 Joined Mochida Pharmaceutical Co., Ltd., and assigned Corporate Quality Assurance.
2012 Joined Novartis Pharma K.K. (Novartis Pharmaceuticals Japan), and assigned Corporate
Quality Assurance.
2013 Joined CM Plus Corporation.
Job Experiences Summary
2013 - 2014: GMP consultation, preparation of GMP training materials, etc.
2005 - 2013: The following activities at three pharmaceutical companies:
Audits
domestic on-site (API 15, DP 7, container 2), overseas on-site (15 countries,
API 20, DP 4), preparation of GMP Questionnaire in Japanese / English
(Mochida and Japan Society of Quality Assurance), articles on audit overseas (7
installments, Pharm Tech Japan, 2012) ;
Regulatory: PMDA GMP Inspection (1 on-site escort and 10 document-based inspections for
overseas contract manufacturers), local authority inspection to Marketing
Authorization Holder (4 escort), Accreditation of Foreign Manufacturers (8
proxy application), process description for CTD Module I (15 products);
Quality Agreement: 6 overseas and 3 domestic contract manufacturers.
1992 2005: The following activities on investigational medicinal products:
Batch record review:
3 APIs as production unit, 4 DPs as quality unit;
Process development:
3 chemical APIs for Phase I/II.

Name: Susumu Machida (Japanese)


Assignment: GMP consultant
Qualification: Project Management professional

Careers
3

Curriculum Vitae

1993 to 1994

As engineering manager, for protein purification plant for Hoechst Japan


Limited at Chiyoda Corporation.

1994 to 1997

As validation manager, responsible for validation of Investigational New


Drug, and Biopharmaceutical Plant at Chiyoda Corporation.
As engineering manager, Biopharmaceutical Plant for Kyowa Hakko at
Chiyoda Corporation.

1999 to 2000

As engineering manager, Biopharmaceutical Plant for Kirin brewery at


Chiyoda Corporation
As project manager for parenteral plant at Chiyoda Corporation.

2002

Engaged in 1st ISPE Japan conference. The Acknowledgement was


received from ISPE Headquarter.

2003 to 2006

Project manager for Solid Dosage Plant in china at Chiyoda Corporation

2006 to 2006

As project director, for Eye Drop Plant (including AS/RS and RABS) at
Chiyoda Corporation.

2010 to 2013

Jointed to CM Plus Corporation, Project manager, owners consultant for


domestic projects for Taiho, Eisai, Takeda etc, and china project for
sohsei (Hainan island), Main Luck pharm. (Shenzhen).

2013 to present

As project directorfor Chemical Hazardous solid dosage plant


As project directorfor Aseptic Lyophilizing form plant in China As
project directorfor Chemical Hazardous API plant.
As project directorfor Biotechnology API plant.

Publication
Bioplant Processing Design (2005)
Age of Air Cleanroom Approach (2002)
Relation between Age of Air and particle (2002)
Multi-product facility for Biohazard plant (2001)
Sanitary Design for food processing (2000)

Le Quang Thien
E-Mail: thien@cm-plus.asia
Vice General Director of CM Plus Vietnam Co., Ltd

Summary of Qualifications
Member of Vietnam Pharmaceutical Companies Association (VNPCA);
GMP consultant for CM Plus Corporation;
ISPE Indonesia's Affiliate Member from 2014;
WHO-GMP, PIC/S-GMP Trained and Certificated by CM Plus Corp.;
4

Curriculum Vitae

Member of European Dialysis Association (EDA) from 2004;


14-year experience in Medical devices industry as President of Cao Vinh Trading
Co., Ltd.;
Master of Business Administration, IHEA's program by Leonardo Group,
University of Economics of HCMC, 1991;
Bachelor of Arts in Foreign languages Faculty (Main majors of French and
Commercial English), Ho Chi Minh Ctiy's University in 1987.
Strong sense in situation's evaluation and path finding.
Education
Ho Chi Minh Citys University 1983 - 1987
Graduated in August 1987
Major in French Language, French Dept, Foreign Language Faculty
Commercial English, Foreign Trade Course of HCMC University
Experience
Senior Director of CM Plus Vietnam Co., Ltd. (CMPV) May 2013 Now
Promoted for sale to pharmaceutical enterprises in Vietnam, including domestic
and invested companies from overseas.
Worked in internal organization of CMPV including human resourcing,
accounting reports reviewing, bankings consulting and in charge of public
relation activities.
President of Cao Vinh Trading Co., Ltd. (CVT) February 2000 Now
Full charge of sales and promotion work: importing merchandises, distributing to
clients, network building.
General Affairs cum Human Resource Manager of Karasawa Kasei (Vietnam)
Co., Ltd. (KKV) Jun 1996 Jan 2000
In charge of general affairs, human resources;
In charge of PR activities to authorities and clients.
Internal management.
Events
Participated in CPhIs South-East Asia Exhibition 2014, Jakarta, Indonesia, May
2014,
Participated in ISPE Indonesias Affiliate Conference in Jakarta, Indonesia, May
2014,
Participated in annual VNPCAs Grand Meetings from 2013;
Participated in annual MEDI-PHARMA EXPOs hosted by MOH of Vietnam from
2000 until present;
Exhibitors in MEDI-PHARMA EXPOs from 2001 to 2007;
Skills
Languages: Vietnamese, English, French, Simple Japanese,
Computer: MS Microsoft Office on both MS and Mac OS,
Interests: Golfing, Swimming, Photography, Outdoor Activities, Reading.
Writing

Curriculum Vitae

Name: Chu Jian Shan

Assignment: Process Engineer

NationalityMalaysia

Language:
Mandarin(Native),English(Fluent),
Japanese(Fluent), Bahasa Melayu(practical)

Education and Career


2009Study abroad in Japan
2010Graduated from Asia Student Culture Language School
2014Graduated from Nihon University (Applied Chemistry)
2014Joined CM PLUS Corporation

Past Project
Year 2014-2015
1) Bio API plant - Manufacturing Technology Association of Biologics
Engage as Process Engineer with following task:
Process Equipment URS preparation
Review of Process Equipment and FAT management
IQ/OQ Document Review, and on-site Validation management
2) Basic Design of Aseptic Lyophilizing form plant
Engage as Process Engineer with following task
Selection of Process Equipment
Construct Production Schedule and Utility Summary
3) Renovation of Aseptic Lyophilizing form plant
Engage as Validation Engineer with following task
IQ/OQ Document Review
Year 2015
4) Proposal Making -Conceptual Design of Solid Dosage Plant in Indonesia
5) Proposal Making -Conceptual Design of Solid Dosage Plant in Vietnam
6

Curriculum Vitae

Name: Kenji Ogiso (Japanese)


Assignment: HVAC/Utility/ Plumbing Engineer
Qualification:

1st

Building Mechanical and Electrical Engineer

Class Registered Architect

Energy Conservation Controller (heats, elec.)

1st Class Registered Refrigerating Equipment and High

Pressured Gases Professional

1st Class Registered Mechanical Engineer

1st Class Registered Refrigeration Engineer

Certificated HVAC & Plumbing Professional

Fire Prevention Engineer (Class A, Category 1)

Experienced mechanical engineer, key-person designer, group leader, and senior site supervisor.
He has been playing a leading role in designing HVAC systems for many life science industrial
projects. Among other projects, here are the major jobs he involved in
Major Project:

A New Pharmaceutical Plant for OSD manufacturing(Meiji Seika pharma)

A new research centers HVAC system (safety ensured facility) (Eisai Pharma)

A Pharmaceutical plant HVAC system (Tanabe Mitsubishi Pharma)

A brewery plant utility center construction and HVAC work(Kirin)

A new pharmaceutical plants HVAC system (Tanabe Mitsubishi Pharma)

A new solid form, aseptic and high active product plant

A pharmacological research centers HVAC system (Mitsubishi Chemical)

A new R/D center (basic design)

Name: Kazutaka Soga

Curriculum Vitae

Assignment: Electrical Engineer


Qualification:
Certified electrician
Certified high-voltage Electrician
1979

Career
Jointed to Design Institute

1983

Research center construction of machine manufacturer.


Electrical equipment detailed design.

1987

Establish Design Institute dedicated to electrical engineering

1988

Experiment building construction for electronic equipment manufacturer.


Electrical equipment detailed design.

1990

Factory construction for electronic equipment manufacturer.


Electrical equipment detailed design.

1991

Food central research lab construction.


Electrical equipment detailed design.

1993

Chemical processing plant construction.


Electrical equipment detailed design.

1995

Food factory construction


Electrical equipment basic and detailed design.

1997

Construction of food manufacturer bio research center.


Electrical equipment detailed design.

2004

University animal facility construction.


Electrical equipment detailed design.

2005

Factory building and development building construction of machine


manufacturer.
Electrical equipment detailed design.

2008

Train station re-development and commercial complex construction.


Electrical equipment detailed design, site management service.

2010 to present

Joined CM plus corporation


API manufacturing facility quotation estimation.
Clinical trial facility validation documents check.
Pharmaceutical production facility, medical equipment production facility
electrical designing and validation work

2013 to 2014

Electrical plan and detailed design, shop drawing review for parenteral,
sterile drug manufacturing facility in PT Meiji Indonesia.

NGUYEN THANH TUNG


8

Curriculum Vitae

E-Mail: nguyen.tung@cm-plus.asia
Project engineer of CM Plus Vietnam Co., Ltd

Summary of Qualifications
Bachelor of Mechanical Engineering (2002)
Bachelor of Business Administration (2007)
Master of Professional Project management in construction (2012)
MBA-mini (2014)

Key Experience
- Project Management in Construction & industrial projects (>12 years)
- Project management in Pharmaceutical field (>2years)
- Engineering & Technical Management in construction projects (>10 years)
- Supervision & Construction Management (>12 years)
- Validation Management (> 5 years)
- Experience in Manufacturing industries (>10 years)
- Experience in Construction consultancy works, Plant design and construction &
-

equipment installation (>7 years)


Experience in Cleanroom and Standards compliance (GMP/ISO/HACCP &

QMS (>2 years)


Experience in Business Development & Promotion (>5 years)
Experience in Procurement management (>5 years)

Typical projects
- Medical Device Manufacturing Plant
- Pharmaceutical Plant
- Cosmetic Manufacturing Plant
- FMCG Manufacturing Plant
- Food Manufacturing Plant
- Refinery Factory
- Power Cycle Plant

Curriculum Vitae

TRAN NGOC QUYNH


Email: quynh@cm-plus.asia
Project Engineer of CM Plus Vietnam Co., Ltd.

A. SUMMARY OF QUALIFICATION
Project management, design review, technical/ site supervision, construction
management, and quantity survey (material take off, cost estimation) for the
projects.
Three years experience in construction project management in food and
pharmaceutical industries.
Five years experience in construction project management in Oils & Gas
industries.
Three years experience in M&E construction management for high-rise building,
property development projects.
Bachelor degree in Electrical Engineering 2005, HCMC University of Technical
Education
Certificates of Project management, Site Supervision, Quantity Survey.
Professional license in Electrical Installation Supervision.
B. WORKING HISTORY
Period

Position

Company

2014-now

Project Engineer

CM Plus Vietnam Co., Ltd.

2010 2014

Project Engineer

PV Engineering Corporation

2007 2010

Site supervisor

Becamex IDC Corporation

Project Engineer

SetiaBecamex

Project supervisor

CaiLan Oils & Fats Industry

2005-2007
Co., Ltd.

C. EXPERIENCE AND PARTICIPATED PROJECTS


10

Curriculum Vitae

1. NIKKISO VIETNAM MFG FACTORY RENOVATION PROJECT HCMC,


VIETNAM
Client:

Nikkiso Vietnam MFG Co., Ltd

Package:

Project management consultancy

Duration:

04/2015 to now

Position:
Ltd.

Project Engineer/ Site Supervisor CM Plus Vietnam Co.,

Responsibility:

Design review, site supervision, quantity survey, tender


proposal evaluation for the project (Clean room, M&E
systems, building works).

2. TERUMO VIETNAM CLEAN ROOM RENOVATION PROJECT HANOI,


VIETNAM
Client:

Terumo Vietnam Co., Ltd

Package:

Project management consultancy

Duration:

2014 to 2015

Position:

Project Engineer/ Site Supervisor CM Plus Vietnam Co.,


Ltd.

Responsibility:

Tender proposal evaluation, design review, site supervision,


Clean room validation (IQ, OQ).

3. UPGRADE AND AUTOMATION FOR LPG STORAGE SYSTEM & FIRE


FIGHTING SYSTEM FOR BRANCH OF TOTAL GAS PLANT DAKLAK
PROVICE, VIETNAM
Client:

Total Vietnam Co., Ltd

Package:

Engineering, procurement and construction

Duration:

10/2013 to 2014

Position:

E&I Construction Manager PV Engineering Corporation

Responsibility:

Survey, design review, cost estimation,


management at site for E&I works.

construction

4. SONG HAU 1 THERMAL POWER PLANT PROJECT HAU GIANG,


VIETNAM
Client:

Petro Vietnam National Group

Package:

Project management consultancy

Duration:

07/2011 to 2014

Position:

Project Coordinator PV Engineering Corporation

Responsibility:

To assist Project manager in project management.

5. BINH PHUOC BIO-ETHANOL PLANT PROJECT BINH PHUOC PROVINCE,


VIETNAM
Client:

Orient Bio-Fuel Company JSC.

Package:

Engineering, Procurement and Construction


11

Curriculum Vitae

Duration:

06/2010 to 09/2012

Position:

Electrical Project Engineer PV Engineering Corporation

Responsibility:

Survey, design review, cost estimation,


management at site for Electrical works.

construction

6. E100 INFRASTRUCTURE AND STORAGE PROJECT NHA BE, HCMC.,


VIETNAM
Client:

PV Oil

Package:

Engineering, procurement and construction

Duration:

02/2012 to 08/2012

Position:

E&I Construction Manager PV Engineering Corporation

Responsibility:

Survey, design review, cost estimation,


management at site for E&I works.

construction

7. EASTERN INTERNATIONAL UNIVERSITY PROJECT BINH DUONG,


VIETNAM
HORIZONTAL APARTMENT PROJECT BINH DUONG, VIETNAM
Client:

Becamex IDC Corporation

Package:
Duration:

2009 to 2010

Position:

M&E Project Engineer Becamex IDC

Responsibility:

To manage, control designers, construction contractors, site


management to get the project successful completion.

8. ECOLAKES RESIDENCIAL TOWNSHIP PROJECT BINH DUONG,


VIETNAM
Client:

SetiaBecamex JSC

Package:
Duration:

2007 to 2009

Position:

M&E Project Engineer SetiaBecamex JSC

Responsibility:

To manage, control designers, construction contractors, site


management to get the project successful completion.
9. CAI LAN EDIBLE OIL REFINERY AND PACKING COMPLEX PROJECT
NHA BE, VIETNAM
Client:

Cai Lan Oils & Fats Industries Co., Ltd.

Package:
Duration:

2005 to 2007

Position:

M&E Project Supervisor Cai Lan Oils & Fats Industries Co.,
Ltd.

Responsibility:

To manage, control designers, construction contractors, site


management to get the project successful completion.
12

Curriculum Vitae

LUU HUU SONG HIEN


376 Tran Hung Dao Street,
Ward 2, District 5, Ho Chi Minh City, Vietnam
Mobile phone: 0909-423-890

QUALIFICATIONS
Japanese - Japanese Proficiency Test 2-kyu
English
- TOEIC 850 points
EDUCATION
October 2007 March 2009
Yokohama, Japan

Yokohama YMCA College

Japanese language department


September 2003 September 2007
Ritsumeikan Asia Pacific University
Beppu, Japan
College of Asia Pacific Management
WORK EXPERIENCE
Kewpie Vietnam Assistant for Japanese Sales Manager
March
2012 July 2014
-Responsible for translating between the Japanese sales manager and
Vietnamese sales staff.
-Involved in the recruiting of promotion employees and provided on-the- job
training.
-Prepared monthly promotion plan for company products.
-Translated reports and company documents for Japanese manager.
-Maintained customer relationships through face-to-face or telephone
communication.
-Supervised the delivery of our product and monitored sales figures.
CM Plus Vietnam Translator/ Interpreter
January 2015
Present
-Translate pharmaceutical documents from Japanese to English
-Translate memoranda meeting from Vietnamese to English

13

Curriculum Vitae

TRUONG TRONG HIEU

Project Engineer of CM Plus Vietnam Co., Ltd.


Email: hieu@cm-plus.asia
Positions: HVAC Project Engineer of CMP Vietnam.

EDUCATION
2004 2009
Nha Trang University, Nha Trang City
HVAC Engineer
2012 2015
Back Khoa University, HCM City
Master of Thermal Technology
QUALIFICATIONS
English
- TOEIC 525 points
Membership of Professional Societies: VIETNAM THERMAL ASSOCIATION
(VTA)
WORK EXPERIENCE
From 2011 to 2015: PVENGINEERING JOINT STOCK COMPANY
CON DAO WIND POWER PLANT PROJECT
Client: TAI NGUYEN XANH COMPANY
Design phase: Detailed Design. (2014)
Scope of work:
-

Annual energy produced calculation

Optimal design hybrid system.

Financial analysis for project.

Making shop drawings.

Oil storage tank calculation report.

Oil storage tank calculation sheet.

Comment & Review HVAC Document


Position: Engineer
Responsibilities:

Calculate & design for all of documents.


SU TU TRANG FFD PROJECT (FEED)
Client: Cuu Long JOC
Design phase: Detailed Feed. (2014)
14

Curriculum Vitae

Scope of work:
-

Prepare design philosophy

Cooling load calculation report.

Cooling calculation sheet.

Making shop drawings.

Ventilating calculation report.

Ventilating calculation sheet.

Comment & Review HVAC Document


Position: Engineer
Responsibilities:

Calculate & design all of documents


BLAST BUILDINGS PROJECT DUNG QUAT REFINERY
Client: Binh Son (BRS) Dung Quat Refinery Petro VietNam
Corporation
Design phase: Detailed Design. (2013)
Scope of work:

Prepare design philosophy

Cooling load calculation report.

Cooling calculation sheet.

Making shop drawings.

Ventilating calculation report.

Ventilating calculation sheet.

Comment & Review HVAC Document


Position: Key Engineer
Responsibilities:

Manage HVAC Documents


DIAMOND PROJECT - MOM of INTERNAL KICK OFF MEETING
Client: Cuu Long JOC. EPCI Main Contractor: Vietso Petro Joint Venture
Design phase: FEED and Detailed Design. (2012)
Scope of work:

Comment & Review HVAC Document


Position: SUPPORT
Responsibilities:

Review HVAC Document


15

Curriculum Vitae

ACCOMMODATION BARGE LIVING QUARTERS


Client: VIETSOPETRO
Design phase: Detailed & Basis Design. (2012)
Scope of work:
-

Detailed Engineering for HVAC and Refrigeration system within


Living Quarters

Detailed Power Supply Engineering for HVAC and Refrigeration


system within Living Quarters
Position: ENGINEER
Responsibilities:

Cooling load calculation report.

Cooling calculation sheet.

PFD, P&ID Drawings.

Ventilating calculation report.

Ventilating calculation sheet.

PFD, P&ID Drawings.


CA MAU GAS PROCESSING PLANT 2 FEED DESIGN.
Client: PMT OF PVGAS.
Design phase: FEED Design. (2011)
Scope of work:

Detailed Engineering for HVAC system


Position: ENGINEER
Responsibilities:

Cooling load calculation report.

Cooling calculation sheet.

PFD, P&ID Drawings.

Ventilating calculation report.

Ventilating calculation sheet.

PFD, P&ID Drawings.


From 2009 to 2011: REE ELECTRIC APPLIANCES JOINT STOCK
COMPANY.
VAN XUAN PHARMACY PROJECT
Client: VAN XUAN COMPANY CLEAN ROOM
Design phase: Detailed Design. (2011)
Scope of work:

Prepare design philosophy (Following WHO-GMP Standard)


16

Curriculum Vitae

Cooling load calculation report.

Cooling calculation sheet.

Making shop drawings.

Ventilating calculation report.

Ventilating calculation sheet.

Comment & Review HVAC Document


Position: Key Engineer
Responsibilities:

Manage HVAC Documents


BAO LONG PHARMACY PROJECT
Client: BAO LONG PHARMACY COMPANY CLEAN ROOM
Design phase: Detailed Design. (2011)
Scope of work:

Prepare design philosophy (Following WHO-GMP Standard)

Cooling load calculation report.

Cooling calculation sheet.

Making shop drawings.

Ventilating calculation report.

Ventilating calculation sheet.

Comment & Review HVAC Document


Position: Key Engineer
Responsibilities:

Manage HVAC Documents


NATIONAL
PROJECT

HOSPITAL

OF

OBSTETRIC

AND

Client: National Hospital 43 Trang Thi Ha Noi City


Design phase: Detailed Design. (2011)
Scope of work:
-

Making shop drawings.

Comment & Review HVAC Documents


Position: Supervisor
Responsibilities:

Manage HVAC Documents & Supervisor out site.


SACOMBANK BUILDINGS CAN THO BRANCH.
Client: Sacombank
17

GYNAECOLOGY

Curriculum Vitae

Design phase: Shop Drawing Design. (2010)


Scope of work:
-

Command Works
Position: PROJECT MANAGER.
Responsibilities:

Manage all technical files related to project HVAC System

Control of HVAC related items


HMTC BUILDINGS HAI BA TRUNG HO CHI MINH CITY.
Client: HMTC GROUP
Design phase: Shop Drawing Design. (2010)
Scope of work:

Command Works
Position: PROJECT MANAGER.
Responsibilities:

Manage all technical files related to project HVAC System

Control of HVAC related items


INTERNATIONAL CONFERENCE CENTRE PHU YEN
Client: Sao Viet Resort
Design phase: Shop Drawing Design. (2009)
Scope of work:

Supervisor
Position: SUPERVISOR.
Responsibilities:

Supervise all technical files related to project HVAC System

Control of HVAC related items


DUC LONG TOWER GIA LAI
Client: Duc Long Group
Design phase: Shop Drawing Design. (2009)
Scope of work:

Supervisor
Position: SUPERVISOR.
Responsibilities:

Supervise all technical files related to project HVAC System

Control of HVAC related items


AYUNPA & AN KHE BOOKSTORE GIA LAI.
18

Curriculum Vitae

Client: Tre Xanh Plaza Group


Design phase: Shop Drawing Design. (2009)
Scope of work:
-

Supervisor
Position: SUPERVISOR.
Responsibilities:

Supervise all technical files related to project HVAC System


Control of HVAC related items
CM Plus Vietnam Project Engineer
October 2015 Present

19

You might also like