Professional Documents
Culture Documents
CRT3557
DEH-P3800MP/XU/UC
DEH-P3800MP
/XU/UC
This service manual should be used together with the following manual(s):
Model No.
CX-3164
Order No.
CRT3583
Mech.Module
S10.5COMP1
Remarks
CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
PIONEER CORPORATION
SAFETY INFORMATION
CAUTION
A
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
- CD Section Precaution
1. You should conform to the regulations governing
the product (safety, radio and noise, and other
regulations), and should keep the safety during
servicing by following the safety instructions
described in this manual.
2. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
3. To protect the pickup unit from electrostatic discharge
during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY".
4. After replacing the pickup unit, be sure to check the
grating.
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING ................................................................................................................................................... 6
2.2 EXTERIOR................................................................................................................................................. 8
2.3 CD MECHANISM MODULE..................................................................................................................... 10
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 12
3.1 BLOCK DIAGRAM ................................................................................................................................... 12
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 14
3.3 KEYBOARD UNIT.................................................................................................................................... 20
3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 22
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 32
4.1 TUNER AMP UNIT................................................................................................................................... 32
4.2 KEYBOARD UNIT.................................................................................................................................... 36
4.3 CD CORE UNIT(S10.5COMP1)............................................................................................................... 38
5. ELECTRICAL PARTS LIST ............................................................................................................................ 40
6. ADJUSTMENT ............................................................................................................................................... 44
6.1 CD ADJUSTMENT................................................................................................................................... 44
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 46
6.3 ERROR MODE ........................................................................................................................................ 48
6.4 SYSTEM MICROCOMPUTER TEST PROGRAM ................................................................................... 49
7. GENERAL INFORMATION ............................................................................................................................. 50
7.1 DIAGNOSIS ............................................................................................................................................. 50
7.1.1 DISASSEMBLY ..................................................................................................................................... 50
7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 53
7.2 PARTS...................................................................................................................................................... 54
7.2.1 IC .......................................................................................................................................................... 54
7.2.2 DISPLAY ............................................................................................................................................... 64
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 65
8. OPERATIONS ................................................................................................................................................ 66
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
1. SPECIFICATIONS
A
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
"
2.1 PACKING
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Description
Mark No.
Part No.
1
2
3
5
Polyethylene Bag
Cord Assy
Accessory Assy
Screw Assy
CEG1173
XDE7008
CEA4610
CEA6002
6
7
8
9
10
Fixing Screw(M2 x 4)
Screw
Polyethylene Bag
Screw
Screw
CBA1994
CBA1650
CEG-127
CRZ50P090FTC
TRZ50P080FTC
11
12
13
14
Polyethylene Bag
Handle
CEG-158
CNC5395
Part No.
15
Bush
CNV3930
16
17
18
19
20
CXC5719
CEX1065
YHG5049
YHL5049
YHP5008
Protector
Owner's Manual
Installation Manual
Caution Card
Caution Card
YHP5009
YRD5050
YRD5051
CRP1294
CRP1310
21
22-1
22-2
22-3
22-4
*
Description
CRY1246
Language
English, French, Spanish
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
2.2 EXTERIOR
61
56
59
53
60
63
65
62
14
64
31
55
32
64
42
49
B
C 58
32
54
32
43
37
57 64
32
36
12
39
46
67
47
50 48
44
38
41
45
35
34
71
72
33
51
15
40
2
2
28
16
69
2
2
16
70
9
8
18
26
70
30
17
29
B
23
22
24
68
19
21
20
17
66
27
25
10
11
1
73
13
E
74
A
B
52
C
F
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Description
Mark No.
Part No.
1
2
3
4
5
Screw
Screw
Screw
Screw
Cord Assy
ASZ26P050FTC
BSZ26P060FTC
BSZ30P060FTC
BSZ30P200FTC
XDE7008
6
7
8
9
10
Holder
Earth Plate
Cushion
CD Mechanism Module(S10.5)
CNC8659
CNC8915
CNM8890
CXK5750
11
12
13
14
15
Cable
Case
Insulator
Panel
Tuner Amp Unit
YDE5013
YNB5008
YNM5012
YNS5104
YWM5103
16
17
18
19
20
Screw
Screw
Screw
Fuse(10 A)
Pin Jack(CN353)
ASZ26P060FTC
BPZ26P080FTC
BSZ26P160FTC
CEK1208
CKB1051
21
22
23
24
25
Plug(CN901)
Connector(CN101)
Connector(CN701)
Connector(CN803)
Antenna Jack(CN401)
CKM1376
CKS3408
CKS3834
CKS4944
CKX1056
26
27
28
29
30
Holder
Holder
Jack(CN621)
Holder
Heat Sink
CND1328
CND1054
YKS5002
YNC5018
YNR5004
31
32
33
34
35
Detachable Assy
Screw
Spring
Knob(SOURCE,VOLUME)
Button(1-6,SW)
YXA5112
BPZ20P100FTB
CBH2210
YAA5005
YAC5059
36
37
38
39
40
Button(UP,DOWN,LEFT,RIGHT) YAC5060
Button(CLOCK,AUDIO,FUNCTION) YAC5061
Button(EJECT,DISPLAY)
YAC5062
Button(EQ,BAND)
YAC5063
Button(DETACH)
YAC5071
41
42
43
44
45
Spring
Cover
Connector(CN1801)
LCD(LCD1801)
Holder
YBH5003
YNS5103
CKS4943
YAW5054
YNC5012
46
47
48
49
Cushion
Lighting Conductor
Lighting Conductor
Rubber
YNM5029
YNV5024
YNV5025
YNV5026
>
*
*
Description
Part No.
50
Connector
YNV5033
51
52
53
54
55
Grille Unit
Chassis Unit
Panel Unit
Button(DETACH)
Spring
YXA5132
YXA5128
YXA5154
CAC4836
CBH1835
56
57
58
59
60
Spring
Spring
Bracket
Holder
Cover
CBH2208
CBH2367
CNC6791
CNC8042
CNM6276
61
62
63
64
65
Arm
Arm
Arm
Screw
Panel
CNV4692
CNV4728
CNV5576
IMS20P030FTB
YNS5046
66
67
68
69
70
CWE1952
TSOP4840SB1
PAL007B
NJM2388F84
2SD2396
71
72
73
74
Screw
Holder
Remote Control Assy
Cover
BMZ40P140FTC
CNV7619
CXC5719
CNS7068
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
10
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
Description
Mark No.
Part No.
1
2
3
4
5
CD Core Unit(S10.5COMP1)
Connector(CN101)
Connector(CN901)
Screw
Screw
CWX3176
CKS4808
CKS5284
BMZ20P025FTC
BSZ20P040FTC
6
7
8
9
10
Screw(M2 x 3)
Screw(M2 x 4)
Washer
Spring
CBA1511
CBA1835
CBF1038
CBH2609
11
12
13
14
15
Spring
Spring
Spring
Spring
Spring
CBH2612
CBH2614
CBH2616
CBH2617
CBH2620
16
17
18
19
20
Spring
Spring
Spring
Spring
Spring
CBH2855
CBH2937
CBH2735
CBH2854
CBH2642
21
22
23
24
25
Spring
Spring
Spring
Spring
Spring
CBH2856
CBH2857
CBH2860
CBH2861
CBL1686
26
27
28
29
30
Arm
Frame
Bracket
Arm
Lever
CND1909
CND2582
CND2583
CND2584
CND2585
31
32
33
34
35
Arm
Bracket
Arm
Lever
Holder
CND2586
CND2587
CND2588
CND2589
CNV7201
36
37
38
39
40
Gear
Gear
Gear
Gear
Gear
CNV7207
CNV7208
CNV7209
CNV7210
CNV7211
41
42
43
44
45
Gear
Rack
Arm
Roller
Gear
CNV7212
CNV7214
CNV7216
CNV8189
CNV7219
46
47
48
49
Guide
Gear
Guide
Arm
CNV7361
CNV7595
CNV8448
CNV7805
Description
Part No.
50
Rack
CNV8342
51
52
53
54
55
Roller
Holder
Arm
Guide
Arm
CNV8343
CNV8344
CNV8345
CNV8347
CNV8348
56
57
58
59
60
Arm
Arm
Clamper
Arm
Guide
CNV8349
CNV8350
CNV8365
CNV8386
CNV8396
61
62
63
64
65
Arm
Collar
Motor Unit(M2)
Arm Unit
Chassis Unit
CNV8413
CNV8447
CXC4026
CXC4027
CXC4028
66
67
68
69
70
Gear Unit
Frame Unit
Motor Unit(M1)
Screw Unit
Screw
CXC4029
CXC4031
CXC6742
CXC6359
JFZ20P020FTC
71
72
73
74
Screw
Washer
Pickup Unit(P10.5)(Service)
Screw
JGZ17P022FTC
YE20FTC
CXX1942
IMS26P030FTC
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
11
5V
OSC
ANTENNA
NC
NC
NC
18 19 20 21
DO
14
NC
CE1
11
NC
TUNPCK
TUNPDI
IC 3 EEPROM
5.0V
DI
SL
10 9 8
CK
ROM_VDD
CE2
NC
13
IC 5
3.3V
7 6
TUNPDO
VDD5
LPF
CN401
AM ANT
FMRF
ATT
Rch
IC 1
3.3V
FM ANT
ATT
FMRF
Lch
MIXER, IF AMP
23
DET, FM MPX
RF adj
T51
DGND
AUDIOGND
NC
12
15
22
16
VCC
OSCGND
RFGND
CF52
VDD_3.3
ANT adj
3.3V
IC 4
3.3V 2.5V 2.5V
24
IC 2
2.5V
TUNL
17
5
VDD_3.3V
VCC8
1
CN101
11 BUSL
7 BUSL+
Q101
B14
B.UP
IP_BUS
Q102
40
ASENBO
B+
IC 101
HA12241FP
30
29
27
52
ASENBO
TX
RX
RX2
IPPW
CN621
PICKUP UNIT
(P10.5)(SERVICE)
C
D
CD CORE UNIT(S10.5COMP1)
LDMD
15
142
15
Q101
VREF 8
REFO
F,E
FOM
FOCUS ACT.
MONITOR
TRACKING ACT.
DIODE
143
133
AC,BD
HOLOGRAM
UNIT
3
FOP
2
TOP
1
TOM
4
LD+
14
LOAD/ CARRIAGE
MOTOR
34
KEY2
94
CN901
LD
IC201
UPD63763CGJ
PD
LOUT
REFOUT
RF-AMP,CD DECODER,
XTAL
MP3 , WMA, DECODER,
DIGITAL SERVO / DATA PROCESSOR
LOUT
31
2
1 TOP
TOM
TD,FD
SD,MD
IC
P
CN701
16
16
11
11
/RESET
10
CDMUTE
8
10
8
LOUT
X201
16.93MHz
XRST,XASTB,ADO,XCK,
XSO,XSI,WAIT,XINT
VDD
14
CD
12
FOM
DRIVER
11
FOP
14
TOP
13
TOM
Q701
IC301
BA5835FP
LOCK
16
SOP CLCONT 21
15
SOM
22
18
LOEJ
LCOP
17
9
CONT
LCOM
41
40
47
30
42
S904
12EJ
S905
8EJ
VDD
SWVDD
VDD5
63
31
CLCONT
/CD3VON
43
14
RESET
39
CDMUTE
21
/RESET
LOEJ
IC701
CONT PE5505A
CD CONTROLLER
X1 12
12EJ
8EJ
DSCSNS
BRST,BRXEN,BSRQ,BDATA,BSCK
BRST,BRXEN,BSRQ
BDATA,BSCK
X2 13
VD
VD
X701
4.00MHz
VD
Q702
B.UP
3
Q701
4
5
2
HOME
S901
HOME
VDCONT
CD3VON
46
49
VDCONT
9 VDCONT
S903
DSCSNS
V3R3D
IC203
NJM2886DL3-33
1
3
VD
+3.3V REGULATOR
12
KEYAD
LOCK/RFOK
56
32
KEYD
34
/XTAL 35
FOM
FOP
E
SPINDLE
MOTOR
KEY1
SYSTEM
V3R3D
CN101
LASER
DIODE
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
CDRST
A
CN351
RESET
SWL
IC 961
BD4843G
VDD5
Q351
CN353
12
RESET
RCFL
TUNPDO
68
TUNPDI
86
TUNPCK
67 TPCK
66
TUNPCE1
65 TUNPCE2
CE1
CE2
Q353
TPDI
TPDO
VDD5V REG.
Q911
VDD5
Q912
SYSTEM CONTROLLER
IC 601(1/2)
PEG155B
DALMON
47
BACKUP SENSE
BSENS
ASENS
19
CN901
B.UP
BSENS
20
FUSE
BACK UP
ACC
GND
10
10
FL-
12
12
FL+
11
11
RLRL+
B. REM
10A
Q931
ACC
ASENS
ACC SENSE
B.UP
AMP
ELECTRONIC VOLUME/
SOURCE SELECTOR
TUNL
FRONT_L
IN2_L
PRE/SW_L
5
4
REAR_L
IN4_L
20
VCC
14
FLIN
FL
IC 301
PAL007B
12
12
VCC
FL+
RL
RLIN
RL+
FL
23
21
FL+
RL
RL+
IC 151
IN4+_L PML015A
22
MUTE
B.REM
STBY
4
BREM
25
IN1_L
MUTE
VCC8
Q453
B.UP
TUN 3V REG.
3
VDD_3.3V
IC 401
NJM2885DL1-33
SYS 8V REG.
1
IC 921
NJM2388F84
Q451
30
29
27
52
34
94
MUTE
ASENBO
B.UP
53
SYSPW
40
TX
RX
SYSPW
48
SYSPW
RX2
IPPW
KEYD
KEYAD
SYSTEM CONTROLLER
IC 601(2/2)
PEG155B
XOUT
13
X601
XIN
15
B
CN803
CN1801
KEY MATRIX
Q851
SWVDD
VDD5
Q852
SWVDD
DSENS
21
SWVDD
S1801
FUNC
7
18
DSENS
CDRST
10
10
DSENS
ILMB+
ILM
Q842
B.UP
ILMPW
IL1801
LAMP
S1827
SSENS
ROT1
ROT0
92
SSENS
ROT1
ROT0
4
6
7
DPDT
KYDT
36
DPDT
KYDT
S1804
1
S1805
4
S1806
2
S1813
S1814
UP
S1807
AUDIO
S1809
6
S1810
5
S1811
S1812
DOWN
S1815
S1816
EQ
S1817
S1818
RIGHT
S1819
S1820
LEFT
S1821
DISP
S1822
S1824
EJECT
S1825
SW
S1828
CLOCK
S1829
3
4
6
7
SOURCE
ROT1
ROT0
SWVDD
REM.CON.
3
1
IC1802
TSOP4840SB1
57
VOLUME
PUSH:SOUCE
35
S1802
S1803
BAND
D1803,
D1805-D1816
Q841
B.UP
KEYBOARD UNIT
REM
50
DPDT
49
KYDT
46
47
SI
SO
V3
VDD
KEY DATA
LCD DRIVER/
KEY CONTROLLER
IC 1801
PD6538A
X0
X1
54
55
X1801
5MHz
F
LCD1801
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
13
A-a
A
A-a
A-b
Large size
SCH diagram
FM:-24dBs
AM:-24dBs
A-b
Guide page
Detailed page
A-a
A-b
471/16
A-a
CD:0.35dBs
XIN
VSS
CD-RESET
VCC
XOUT
15.000MHz
CN901
NC
NC
SYSTEM CONTROLLER
IP-Bus:2.21dBs
B
CN1801
A
14
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
TUNPDI
TUNPCK
CE1
CE2
VSS
VCC
TU
A-b
A
>
FM,AM:-2.9dBs
CD:10.45dBs
IP-Bus:10.31dBs
332/16
XOUT
VSS
15.000MHz
3A
AVCC
VREF
CEK1208 10A
AVSS
600H
>
NTROLLER
471/16
TUNPDI
TUNPCK
TUNPDO
D
FM,AM:23.1dBs
CD:36.45dBs
IP-Bus:36.31dBs
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
The > mark found on some component parts indicates
the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
A
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
15
SYSTEM CONTROLLER
A-b
AVSS
TUNPDO
AVCC
VREF
XOUT
15.000MHz
CD:0.35dBs
XIN
471/16
A-a A-b
FM:-24dBs
AM:-24dBs
A-a
16
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
NC
NC
CD-RESET
CN901
VSS
VCC
TUNPDO
A-b
TUNPDI
TUNPCK
CE1
CE2
VSS
VCC
NC
SYSTEM CONTROLLER
A-a A-b
B
IP-Bus:2.21dBs
CN1801
A-a
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
17
A-b
1
2
Downloaded from www.Manualslib.com manuals search engine
18
1
600H
3A
>
DEH-P3800MP/XU/UC
>
CEK1208 10A
TUNPDO
AVSS
AVCC
VREF
FM,AM:-2.9dBs
CD:10.45dBs
IP-Bus:10.31dBs
A-a A-b
B
332/16
1
4
TUNPDO
5
Downloaded from www.Manualslib.com manuals search engine
7
*Capacitors
Code
Practical value
103
0.01uF
101/10
100uF/10V
Ex. *Resistors
Code
Practical value
123
12k ohms
103
10k ohms
A-a A-b
471/16
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.
FM,AM:23.1dBs
CD:36.45dBs
IP-Bus:36.31dBs
>
5
8
A-b
DEH-P3800MP/XU/UC
19
FU
5.00MHz
B
20
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
KEYBOARD UNIT
FUNCTION
A
CN803
CEL1651
40mA,14V
DISPLAY
C
SML-310PT
B
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
21
C-a
B
PICKUP UNIT(P10.5)(SERVICE)
$
F
F
T
T
T
F
@
T
F
F
T
SWITCHES:
CD CORE UNIT(S10.5COMP1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
The underlined indicates the switch position.
CD DRIVER
M1 CXC6742
SPINDLE MOTOR
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
M2 CXC4026
LOADING/CARRIAGE MOTOR
NC
NC
NC
NC
4
NC
NC
F
F
T
T
S
S
C
C
2
1
C
22
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
NC
NC
NC
NC
NC
C-b
B
SIGNAL LINE
F
T
C
S
CD CORE UNIT(S10.5COMP1)
+ 3.3 V REGULATOR
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
CD3VON(MCKRQ)
NC
SRAMLEVEL2
NC
ADENA
NC
NC
NC
NC
NC
NC
NC
SRAMLEVEL1
NC
SRAMLEVEL0
CD CONTROLLER
(S904)
(S905)
NC
NC
NC
^
%
CN701
C
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
23
1
2
Downloaded from www.Manualslib.com manuals search engine
3
T
C-a
DEH-P3800MP/XU/UC
T
F
F
T
F
F
T
T
C
C
S
S
24
T
F
C-b
SWITCHES:
CD CORE UNIT(S10.5COMP1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
PICKUP UNIT(P10.5)(SERVICE)
C-a
A-a C-b
1
4
5
Downloaded from www.Manualslib.com manuals search engine
M2 CXC4026
LOADING/CARRIAGE MOTOR
M1 CXC6742
SPINDLE MOTOR
F
F
T
C-a
A-a C-b
CD DRIVER
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
SWITCHES:
CD CORE UNIT(S10.5COMP1)
S901:HOME SWITCH..........ON-OFF
S903:DSCSNS SWITCH......ON-OFF
S904:12EJ SWITCH.............ON-OFF
S905:8EJ SWITCH...............ON-OFF
S
S
C
C
5
7
2
3
C-b
C-a
DEH-P3800MP/XU/UC
25
NC
NC
NC
NC
C-b
1
2
Downloaded from www.Manualslib.com manuals search engine
26
S
C CD CORE UNIT(S10.5COMP1)
SIGNAL LINE
+ 3.3 V REGULATOR
C-a C-b
1
2
3
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
CD CONTROLLER
NC
(S905)
(S904)
SRAMLEVEL0
SRAMLEVEL1
ADENA
SRAMLEVEL2
CD3VON(MCKRQ)
C-a C-b
CN701
5
7
8
NC
C-b
DEH-P3800MP/XU/UC
27
NC
NC
NC
NC
NC
- Waveforms
A
1 DSCSNS 5 V/div
2 8SNS
5 V/div
3 12SNS
5 V/div
Ref.:
GND
Ref.:
GND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1 V/div
1 s/div
500 mV/div
500 mV/div
6 SIN
7 CIN
8 TIN
6 SIN
7 CIN
8 TIN
1 V/div
1 s/div
500 mV/div
500 mV/div
500 ms/div
1 V/div
1 s/div
500 mV/div
500 mV/div
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
@ FE
9 FIN
! TE
8 TIN
Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65 V)
12 cm CD Loading operation
9 FIN
0 RFOK
6 SIN
12 cm CD Loading operation
6 SIN
7 CIN
8 TIN
# MDX
6 SIN
2 V/div
50 ms/div # MDX
200 mV/div
6 SIN
2 V/div
5 s/div
500 mV/div
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
28
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
9 FIN
@ FE
$ RFAGC
! TE
8 TIN
500 s/div
1 V/div
500 mV/div
500 mV/div
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
$ RFAGC
! TE
8 TIN
1 V/div
500 s/div $ RFAGC
500 mV/div
! TE
500 mV/div
8 TIN
$ RFAGC
! TE
8 TIN
1 V/div
1 ms/div
500 mV/div
500 mV/div
1 V/div
2 ms/div
500 mV/div
500 mV/div
Ref.:
REFO
Ref.:
REFO
Ref.:
REFO
Mode:
TEST
Mode:
TEST
Mode:
TEST
$ RFAGC
! TE
7 CIN
6 SIN
1 V/div
1 V/div
500 ms/div
12 cm CD Eject operation
D
Ref.:
REFO
Ref.:
AGND
Ref.:
GND
Mode:
Normal
Mode:
Normal
Mode:
Normal
1 DSCSNS 5 V/div
5 CLCONT 5 V/div
4 LOEJ
5 V/div
1 V/div
500 ms/div
500 mV/div
500 mV/div
E
12 cm CD Eject operation
8 cm CD Eject operation
Ref.:
GND
Ref.:
GND
Ref.:
REFO
Mode:
Normal
Mode:
Normal
Mode:
Normal
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
29
6 SIN
7 CIN
8 TIN
1 V/div
1 V/div
1 V/div
1 V/div
Ref.:
REFO
Ref.:
REFO
Mode:
Normal
Mode:
Normal
500 s/div
30
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
NOTE:
Parts whose parts numbers are omitted are subject to being not supplied.
The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
The > mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Meaning of the figures and others in the parentheses in the parts list.
Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding
PC board.
IC 301 (A, 91, 111) IC NJM2068V
Circuit Symbol and No.
Part No.
A
Unit Number : YWM5103
D
Unit Name
MISCELLANEOUS
IC 101
IC 151
IC 301
IC 401
IC 601
(B,63,61) IC
(B,136,85) IC
(A,96,137) IC
(B,153,28) IC
(B,88,57) IC
HA12241FP
PML015A
PAL007B
NJM2885DL1-33
PEG155B
IC 921
IC 961
Q 101
Q 102
Q 351
(A,10,124) IC
(B,67,35) IC
(B,42,99) Transistor
(B,34,116) Transistor
(B,163,134) Transistor
NJM2388F84
BD4843G
2SA1576
DTC114EU
UMH3N
Q
Q
Q
Q
Q
353
451
453
701
702
(B,141,129) Transistor
(B,124,116) Transistor
(B,124,122) Transistor
(B,30,54) Transistor
(A,9,71) Transistor
UMH3N
DTC124EU
UMD2N
UMD2N
2SD2396
Q
Q
Q
Q
Q
841
842
851
852
911
(B,129,33) Transistor
(B,125,35) Transistor
(B,41,17) Transistor
(B,51,12) Transistor
(A,9,106) Transistor
2SA1036K
DTC114EU
2SA1036K
DTC114EU
2SD2396
(B,21,74) Transistor
(B,64,92) Transistor
UMD2N
UMX1N
Q 912
Q 931
40
1
2
Downloaded from www.Manualslib.com manuals search engine
Part No.
D 701
D 801
D 802
(A,25,57) Diode
(B,35,20) Diode
(B,39,23) Diode
HZS7L(C3)
DAN202U
DAP202U
D
D
D
D
D
803
804
805
806
810
(B,116,30) Diode
(B,115,26) Diode
(B,115,43) Diode
(B,110,44) Diode
(A,30,23) Diode
DAN202U
DAP202U
DAN202U
DAP202U
1SS133
D
D
D
D
D
813
901
902
903
904
(A,27,28) Diode
(A,77,115) Diode
(A,80,111) Diode
(A,70,100) Diode
(A,66,100) Diode
1SS133
S5688G
S5688G
S5688G
S5688G
D
D
D
D
L
911
912
931
932
101
(A,24,84)
(A,24,78)
(A,60,95)
(A,56,91)
(A,54,73)
S5688G
HZS6L(B2)
HZS7L(C3)
HZS7L(A1)
LAU2R2K
L
L
L
L
L
161
401
402
403
602
(A,116,85) Inductor
(A,159,91) Inductor
(B,159,96) Inductor
(A,158,54) Inductor
(A,99,37) Inductor
LAU2R2K
LAU1R0K
LCTAW220J2520
LAU1R0K
LAU2R2K
L 701
L 852
L 901
X 601
>FU353
(A,64,70) Ferri-Inductor
(A,50,16) Inductor
(A,39,107) Choke Coil 600H
(A,76,38) Crystal Resonator 15.000MHz
(B,134,137) Fuse 3A
LAU100K
LAU2R2K
CTH1280
CSS1653
CEK1286
>
Z 401
AR401
Fuse 10A
CEK1208
(A,166,99) FM/AM Tuner Unit CWE1952
(A,175,107) Surge Protector DSP-201M-S00B
Diode
Diode
Diode
Diode
Inductor
RESISTORS
R
R
R
R
R
101
102
103
104
105
(B,35,126)
(B,36,104)
(B,27,132)
(B,38,139)
(B,29,138)
RS1/16S181J
RS1/16S222J
RS1/16S181J
RS1/16S101J
RS1/16S101J
R 106
R 107
R 108
(B,33,125)
(B,29,130)
(B,30,129)
RS1/16S223J
RS1/16S223J
RS1/16S102J
DEH-P3800MP/XU/UC
3
Part No.
Part No.
R 109
R 110
(B,31,125)
(B,38,100)
RS1/16S102J
RS1/16S332J
R 704
R 705
(B,54,42)
(B,57,51)
RS1/16S682J
RS1/16S682J
R
R
R
R
R
111
112
113
114
116
(B,36,111)
(A,69,70)
(B,71,57)
(B,69,57)
(B,32,140)
RS1/16S562J
RD1/4PU102J
RS1/16S472J
RS1/16S472J
RS1/16S470J
R
R
R
R
R
706
707
708
709
710
(B,57,48)
(B,45,52)
(B,57,47)
(B,48,47)
(B,57,50)
RS1/16S682J
RS1/16S104J
RS1/16S221J
RS1/16S221J
RS1/16S221J
R
R
R
R
R
117
118
151
152
153
(B,31,140)
(B,59,66)
(B,94,74)
(B,94,76)
(B,94,77)
RS1/16S150J
RS1/16S0R0J
RS1/16S102J
RS1/16S102J
RS1/16S102J
R
R
R
R
R
711
712
713
715
803
(B,52,42)
(B,57,53)
(B,61,34)
(B,45,56)
(B,117,45)
RS1/16S221J
RS1/16S221J
RS1/16S102J
RS1/16S0R0J
RS1/16S473J
R
R
R
R
R
180
301
303
304
306
(B,119,98)
(B,130,111)
(B,129,111)
(B,145,111)
(B,147,111)
RS1/16S0R0J
RS1/16S471J
RS1/16S471J
RS1/16S471J
RS1/16S471J
R
R
R
R
R
804
805
806
807
808
(B,116,24)
(B,106,25)
(A,91,16)
(B,86,15)
(B,34,24)
RS1/16S222J
RS1/16S222J
RD1/4PU222J
RS1/16S222J
RS1/16S104J
R
R
R
R
R
309
351
352
355
356
(A,88,79)
(B,152,97)
(B,159,133)
(B,141,126)
(B,137,103)
RD1/4PU153J
RS1/16S821J
RS1/16S0R0J
RS1/16S821J
RS1/16S821J
R
R
R
R
R
809
810
811
812
813
(B,142,39)
(B,34,22)
(B,93,31)
(B,109,41)
(B,111,28)
RS1/16S222J
RS1/16S103J
RS1/16S473J
RS1/16S473J
RS1/16S104J
R
R
R
R
R
358
359
360
363
364
(B,135,133)
(B,146,133)
(B,166,139)
(B,138,133)
(B,140,133)
RS1/16S821J
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J
R
R
R
R
R
814
815
816
817
821
(B,96,31)
(B,108,27)
(B,123,26)
(B,115,47)
(B,93,40)
RS1/16S102J
RS1/16S102J
RS1/16S1R0J
RS1/16S473J
RS1/16S222J
R
R
R
R
R
381
382
386
401
403
(B,137,129)
(B,145,129)
(B,166,136)
(B,160,60)
(B,160,78)
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
822
823
824
825
826
(B,46,70)
(B,46,71)
(B,115,50)
(B,29,21)
(B,121,25)
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S0R0J
R
R
R
R
R
404
405
406
407
414
(B,160,81)
(B,160,83)
(B,160,85)
(B,160,87)
(A,138,38)
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S0R0J
RD1/4PU1R8J
R
R
R
R
R
841
842
851
852
853
(B,130,29)
(B,128,28)
(B,34,17)
(B,43,14)
(B,119,17)
RS1/16S103J
RS1/16S222J
RS1/16S153J
RS1/16S153J
RS1/16S222J
R
R
R
R
R
421
451
452
453
454
(B,157,77)
(B,125,113)
(B,125,125)
(B,124,119)
(A,120,119)
RS1/16S0R0J
RS1/16S103J
RS1/16S221J
RS1/16S153J
RD1/4PU102J
R
R
R
R
R
911
912
922
931
932
(B,21,71)
(A,24,81)
(B,14,117)
(B,63,56)
(B,57,57)
RS1/16S223J
RD1/4PU152J
RS1/16S473J
RS1/16S104J
RS1/16S104J
R
R
R
R
R
602
603
604
605
606
(B,72,41)
(B,94,80)
(B,100,63)
(B,158,60)
(B,107,43)
RS1/16S103J
RS1/16S103J
RS1/16S681J
RS1/16S681J
RS1/16S103J
R
R
R
R
R
933
934
935
936
937
(B,64,94)
(B,64,96)
(B,60,91)
(B,64,97)
(B,65,122)
RS1/16S104J
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S473J
R
R
R
R
R
607
608
610
612
613
(B,147,55)
(B,104,46)
(B,104,54)
(B,101,74)
(B,100,76)
RS1/16S681J
RS1/16S473J
RS1/16S473J
RS1/16S103J
RS1/16S103J
R 938
R 961
R 962
(B,63,127)
(B,73,35)
(B,64,38)
RS1/4SA102J
RS1/16S102J
RS1/16S822J
R
R
R
R
R
615
616
620
621
622
(B,70,64)
(B,61,36)
(B,96,66)
(B,18,145)
(B,16,142)
RS1/16S0R0J
RS1/16S473J
RS1/16S0R0J
RS1/16S102J
RS1/16S102J
C
C
C
C
C
101
104
151
152
153
(B,29,142)
(B,52,69)
(B,146,82)
(B,146,80)
(B,163,71)
CKSRYB104K16
CKSRYB103K50
CKSRYB105K10
CKSRYB105K10
CKSRYB224K16
(A,20,54)
(A,20,61)
(B,57,54)
RD1/4PU271J
RD1/4PU121J
RS1/16S682J
C 155
C 157
(B,160,69)
(B,126,80)
CKSRYB224K16
CKSRYB105K10
R 701
R 702
R 703
CAPACITORS
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
41
Part No.
(B,126,82)
(B,126,89)
(A,122,89)
CKSRYB105K10
CKSRYB153K50
CEJQ100M16
C
C
C
C
C
161
162
163
165
305
(B,139,97)
(A,116,95)
(B,125,87)
(A,136,97)
(A,128,119)
CKSRYB153K50
CEJQ470M10
CKSRYB104K25
CEJQ100M16
CFTNA224J50
C
C
C
C
C
306
307
308
309
310
(A,143,119)
(A,133,119)
(A,138,119)
(B,127,146)
(B,132,137)
CFTNA224J50
CFTNA224J50
CFTNA224J50
CKSQYB225K10
CKSQYB225K10
C
C
C
C
C
311
313
351
352
355
(A,107,128)
(A,54,125) 3300F/16V
(A,129,96)
(A,142,96)
(A,127,104)
CEJQ100M16
CCH1494
CEJQ2R2M50
CEJQ2R2M50
CEJQ2R2M50
C
C
C
C
C
356
357
358
401
402
(A,148,104)
(B,147,133)
(B,164,139)
(A,152,53)
(B,155,51)
CEJQ2R2M50
CKSRYB222K50
CKSRYB222K50
CEJQ470M6R3
CKSRYB103K50
C
C
C
C
C
403
405
406
407
408
(B,151,34)
(A,154,87)
(B,170,91)
(B,166,66)
(A,142,32)
CKSRYB103K50
CEJQ101M10
CKSRYB104K25
CKSRYB103K50
CEJQ220M16
R
R
R
R
R
1801
1802
1803
1804
1805
(B,39,84)
(B,40,93)
(B,17,69)
(B,22,162)
(B,18,75)
RS1/16S222J
RS1/16S222J
RS1/4SA561J
RS1/4SA471J
RS1/4SA471J
C
C
C
C
C
410
411
451
601
602
(B,141,28)
(B,170,90)
(A,124,127)
(B,76,43)
(B,81,43)
CKSRYB474K10
CCSRCH470J50
CEJQ330M10
CCSRCH180J50
CCSRCH200J50
R
R
R
R
R
1806
1807
1808
1831
1832
(B,27,162)
(B,39,145)
(B,19,65)
(B,16,58)
(B,26,50)
RS1/4SA681J
RS1/4SA681J
RS1/4SA681J
RS1/16S472J
RS1/16S472J
C
C
C
C
C
604
605
606
607
609
(B,97,42)
(A,100,42)
(B,74,32)
(A,76,30)
(B,147,52)
CKSRYB104K16
CEJQ100M16
CKSRYB104K16
CEJQ100M16
CCSRCH470J50
R 1833
R 1835
(B,27,78)
(B,23,78)
RS1/16S2R2J
RS1/16S121J
C
C
C
C
C
701
703
704
705
851
(B,31,51)
(A,34,35) 470F/16V
(B,145,77)
(B,134,70)
(B,48,14)
CKSRYB473K25
CCH1331
CKSRYB105K10
CKSRYB105K10
CKSRYB104K16
C
C
C
C
C
901
911
912
913
921
(B,57,121)
(A,32,59)
(B,25,75)
(A,25,68) 470F/16V
(B,19,108)
CKSRYB104K50
CEJQ470M10
CKSRYB103K50
CCH1331
CKSRYB103K50
C
C
C
C
C
922
923
924
961
962
(A,20,104)
(A,18,120)
(B,19,116)
(B,70,34)
(A,67,39)
CEJQ221M10
CEJQ101M16
CKSRYB103K50
CKSRYB473K25
CEJQ100M16
B
Unit Number :
F
Part No.
C 158
C 159
C 160
A
Unit Name
: Keyboard Unit
MISCELLANEOUS
42
1
2
Downloaded from www.Manualslib.com manuals search engine
IC 1801
IC 1802
D 1801
D 1802
D 1803
(B,30,121) IC
(A,25,71) IC
(B,38,96) Diode
(B,38,100) Diode
(A,26,77) LED
PD6538A
TSOP4840SB1
DAN202U
DAP202U
NESW505C-5273
D
D
D
D
D
1805
1806
1807
1808
1809
(A,12,143) LED
(A,6,150) LED
(A,6,160) LED
(A,40,86) LED
(A,40,96) LED
SML-310PT
SML-310PT
SML-310PT
SML-310PT
SML-310PT
D
D
D
D
D
1810
1811
1812
1813
1814
(A,40,106)
(A,40,128)
(A,40,117)
(A,40,138)
(A,40,149)
LED
LED
LED
LED
LED
SML-310PT
SML-310PT
SML-310PT
SML-310PT
SML-310PT
D
D
X
S
IL
1815
1816
1801
1827
1801
(A,14,68) LED
(A,40,68) LED
(B,39,134) Ceramic Resonator 5.00MHz
(A,27,50) Encoder(SOURCE,VOLUME)
(B,22,31) Lamp 40mA,14V
SML-310PT
SML-310PT
CSS1547
YSD5005
CEL1651
(A,16,81) LCD
YAW5054
LCD1801
RESISTORS
CAPACITORS
C
C
C
C
1801
1802
1803
1804
(B,22,78)
(B,31,158)
(B,30,154)
(B,31,156)
CKSRYB474K10
CKSRYF104Z25
CKSRYF104Z25
CKSRYF104Z25
C
Unit Number : CWX3176
Unit Name : CD Core
Unit(S10.5COMP1)
MISCELLANEOUS
IC 201
IC 203
IC 301
IC 701
Q 101
(B,39,70)
(A,12,16)
(A,28,18)
(A,32,48)
(B,60,89)
IC
IC
IC
IC
Transistor
Q
X
X
S
S
(B,24,41)
(B,28,57)
(A,24,37)
(A,57,57)
(B,23,78)
Transistor
701
201
701
901
903
UPD63763CGJ
NJM2886DL3-33
BA5835FP
PE5505A
2SA1577
UN2111
CSS1603
Ceramic Resonator 4.000MHz CSS1652
Switch(HOME) CSN1067
Switch(DSCSNS) CSN1067
Ceramic Resonator 16.934MHz
DEH-P3800MP/XU/UC
3
(B,42,87) Switch(12EJ)
(B,28,88) Switch(8EJ)
Part No.
CSN1068
CSN1068
RESISTORS
R
R
R
R
R
101
102
103
104
201
(B,61,92)
(B,63,92)
(B,63,89)
(A,52,73)
(B,44,57)
RS1/10SR2R4J
RS1/10SR2R4J
RS1/10SR2R7J
RS1/16SS102J
RS1/16SS102J
R
R
R
R
R
202
203
214
216
221
(A,38,62)
(A,37,62)
(A,46,79)
(A,46,81)
(A,44,81)
RS1/16SS473J
RS1/16SS473J
RS1/16SS472J
RS1/16SS472J
RS1/16SS103J
R
R
R
R
R
222
225
226
227
228
(A,45,81)
(B,52,78)
(B,52,77)
(A,44,75)
(A,46,72)
RS1/16SS103J
RS1/16SS103J
RS1/16SS393J
RS1/16SS562J
RS1/16SS122J
R
R
R
R
R
229
232
241
243
245
(A,44,72)
(A,46,75)
(B,26,63)
(B,26,62)
(B,26,69)
RS1/16SS472J
RS1/16SS122J
RS1/16SS333J
RS1/16SS333J
RS1/16SS333J
R
R
R
R
R
248
307
308
309
310
(B,55,74)
(A,19,20)
(A,17,20)
(A,18,18)
(A,17,16)
RS1/16SS105J
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
RS1/16SS183J
R
R
R
R
R
601
602
606
701
707
(B,30,47)
(B,28,50)
(B,20,54)
(B,26,44)
(B,32,45)
RS1/16S101J
RS1/16S101J
RS1/16S0R0J
RS1/16SS221J
RS1/16SS473J
R
R
R
R
R
709
710
712
713
716
(A,36,35)
(B,41,46)
(A,45,57)
(B,40,57)
(B,29,37)
RS1/16SS222J
RS1/16SS102J
RS1/16SS222J
RS1/16SS222J
RS1/16SS472J
R
R
R
R
R
724
726
727
729
730
(B,31,36)
(B,23,47)
(B,31,42)
(B,20,48)
(B,20,46)
RS1/16S473J
RS1/16SS103J
RS1/16SS473J
RS1/16SS223J
RS1/16SS473J
R
R
R
R
R
740
746
750
902
905
(A,38,59)
(A,13,38)
(A,40,66)
(A,20,36)
(A,21,36)
RS1/16SS222J
RS1/16SS104J
RS1/16SS473J
RS1/16SS221J
RS1/16SS221J
R
R
R
R
906
907
908
911
(B,20,36)
(B,16,62)
(B,16,64)
(B,20,32)
RS1/16SS221J
RS1/16SS0R0J
RS1/16SS0R0J
RS1/16SS0R0J
Part No.
C
C
C
C
C
205
208
209
210
216
(A,34,63)
(B,34,54)
(B,31,57)
(A,31,66)
(B,53,77)
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSRYB105K10
CKSSYB332K50
C
C
C
C
C
217
218
219
220
221
(B,52,79)
(B,52,76)
(B,52,74)
(A,46,77)
(B,51,74)
CKSSYB104K10
CKSSYB473K10
CKSSYB104K10
CKSSYB182K50
CKSSYB104K10
C
C
C
C
C
222
223
224
225
226
(A,46,73)
(A,44,74)
(B,52,68)
(A,47,67)
(A,49,67)
CCSSCH560J50
CCSSCH4R0C50
CKSSYB104K10
CKSSYB103K16
CCSSCH680J50
C
C
C
C
C
227
228
232
237
239
(A,48,65)
(A,46,62)
(A,12,31)
(A,31,67)
(A,46,74)
CCSSCH470J50
CKSSYB103K16
CKSRYB105K10
CKSSYB104K10
CCSSCH220J50
C
C
C
C
C
246
250
251
303
304
(A,42,80)
(A,42,81)
(A,41,83)
(A,18,20)
(A,17,17)
CKSSYB104K10
CKSRYB102K50
CKSRYB102K50
CKSSYB472K25
CKSSYB103K16
C
C
C
C
C
307
308
601
602
701
(A,34,15)
(A,17,30)
(B,25,50)
(B,26,51)
(B,25,47)
CKSSYB104K10
CKSRYB105K10
CCSRCH102J50
CCSRCH102J50
CKSSYB104K10
C
C
C
C
C
703
706
707
714
722
(B,28,42)
(B,34,43)
(A,36,57)
(A,24,41)
(B,29,45)
CKSSYB103K16
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSQYB475K6R3
C 903
C 907
(B,14,54)
(B,14,62)
CKSSYB471K50
CKSSYB103K16
CAPACITORS
C
C
C
C
C
103
108
201
202
204
(B,57,83)
(A,47,66)
(B,46,56)
(B,47,58)
(B,35,48)
CEVW101M16
CKSSYB104K10
CKSSYB102K50
CKSSYB104K10
CEVW220M6R3
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
43
6. ADJUSTMENT
6.1 CD ADJUSTMENT
A
1) Cautions on adjustments
In this product the single voltage (3.3V) is used for the
regulator. The reference voltage is the REFO1 (1.65V)
instead of the GND.
If you should mistakenly short the REFO1 with the GND
during adjustment, accurate voltage will not be obtained,
and the servos misoperation will apply excessive shock
to the pickup. To avoid such problems:
a. Do not mix up the REFO1 with the GND when
connecting the (-) probe of measuring instruments.
Especially on an oscilloscope, avoid connecting the (-)
probe for CH1 to the GND.
b. In many cases, measuring instruments have the same
potential as that for the (-) probe. Be sure to set the
measuring instruments to the floating state.
c. If you have mistakenly connected the REFO1 to the GND,
turn off the regulator or the power immediately.
2) Test mode
This mode is used to adjust the CD mechanism module.
To enter the test mode.
While pressing the 4 and 6 keys at the same time, reset.
To exit from the test mode.
Turn off the ACC and back up.
Notes:
a. During ejection, do not press any other keys than the
EJECT key until the loaded disc is ejected.
b. If you have pressed the () key or () key during focus
search, turn off the power immediately to protect the
actuator from damage caused by the lens stuck.
c. For the TR jump modes except 100TR, the track jump
operation will continue even if the key is released.
d. For the CRG move and 100TR jump modes, the tracking
loop will be closed at the same time when the key is
released.
e. When the power is turned off and on, the jump mode
is reset to the single TR (91), the RF amp gain is set to 0dB,
and the auto-adjustment values are reset to the default
settings.
44
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
- Flow Chart
[Key]
Contents
Display
[CD] or [SOURCE]
Source On
TRK
MIN
SEC
[BAND]
[3]
Power On
(T.Offset is adjusted)
TRK MIN SEC
00
[BAND]
MIN
SEC
[BAND]
MIN
SEC
[BAND]
Power Off
TRK
MIN
91
91
[1]
T.Close & AGC
Applicable servomechanism
Power Off
SEC
99
99
99
TRK
MIN
SEC
[2]
[4]
RF AMP *1
Gain switching
TRK MIN SEC
SPINDLE *9
Speed switching
TRK MIN SEC
GG
[6]
Focus Close
S curve check
TRK MIN SEC
91
TRK
00
[3]
Power Off
TRK
00
Power On
(T.Offset is not adjusted)
TRK MIN SEC
GG
GG
SP
[1]
MIN
SEC
0X
0X
0X
00 00 00
or 99 99 99
[6]
[3]
T.Close
Applicable servomechanism
TRK MIN SEC
[<]
CRG -
*8
00 00 00
or 99 99 99
*8
00 00 00
or 99 99 99
8X 8X 8X
or 9X 9X 9X
8X 8X 8X
or 9X 9X 9X
[>]
[<]
[3]
[6]
CRG/TR jump
value switching
TRK MIN SEC
TRK
??
??
*5
CRG/TR Jump -
*4
*4
SEC
TRK
??
OL
OL
OL
T.Balance adjustment /
T.BAL coefficient display
TRK MIN SEC
??
??
??
[2]
CRG/TR Jump +
MIN
??
[2]
CRG -
[1]
??
??
??
[<]
[5]
Self-adjusting
switching *3
MIN SEC
TRK
CRG +
F,T,RF AGC*7
F.Bias display switching
TRK MIN SEC
??
[2]
CRG +
[>]
RF AGC /
RF AGC coefficient display
TRK MIN SEC
??
SP
[>]
Tracking Servo
Close
*2
SP
MIN
Tracking Open
SEC
8X 8X 8X
or 9X 9X 9X
*6
[BAND]
[2]
Power Off
TRK
*1)
MIN
Tracking Open
TYP
TRK
MIN
8X 8X 8X
or 9X 9X 9X
SEC
SEC
+ 6 dB
06MIN06SEC06
TRK
+ 12 dB
12MIN12SEC12
TRK
[Key]
[BAND]
[>]
[<]
[1]
[2]
[3]
*4) 1TR/4TR/10TR/32TR/100TR
*5) Single 4TR 10TR 32TR 100TR CRG Move
9x(8x):91(81) 92(82)
93(83)
94(84)
95(85)
96(86)
[4]
[5]
[6]
Operation
Test Mode
Power On/Off
CRG + / TR Jump +
(Direction of the external surface)
CRG - / TR Jump (Direction of the internal surface)
T. CLS & AGC & Applicable servomechanism /
AGC,AGC display setting
RF Gain switching / Offset adjustment display /
T.Balance adjustment / T. Open
F. Close,S Curve / Rough Servo and RF AGC /
F,T,RF AGC
SPDL 1X/2X switching
As for the double speed(2x), audio output cannot be
supported.
Error Rate measurement
ON : ERR 30Counts Start
BER display data[%]
F. Mode switching / Tracking Close / CRGTR
Jump Switching
TYP (1X)
TRK
MIN
SEC
2X
22MIN22SEC22
TRK
1X
11MIN11SEC11
TRK
*10)
OFF(TYP)
TRK
MIN
SEC
FORCUS
70MIN70SEC70
TRK
TRACKING
71MIN71SEC71
TRK
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
45
Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.
Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
Method :
Measuring Equipment
Measuring Points
Disc
Mode
CD CORE UNIT(S10.5COMP1)
C
L.P.F.
REFO1
Xch
100k
Oscilloscope
390pF
VREF
Ych
100k
390pF
VREF
L.P.F.
Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the and buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75 . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75 try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75 then the
mechanism should be judged to be at fault.
Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
46
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Grating waveform
30
45
60
75
90
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
47
8-digit display
ERRORxx
6-digit display
ERRxx
4-digit display
Exx
11
Electricity
Focus Servo NG
12
Electricity
Spindle Lock NG
Subcode NG
17
Electricity
Setup NG
30
Electricity
44
Electricity
ALL Skip
50
A0
System
Power Supply NG
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.
48
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
- PCL output
In the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby mode
cancelled), shift the TESTIN IC601(Pin 88) terminal to H.
The clock signal is output from the PCL terminal IC601(Pin 39).
The frequency of the clock signal is 468 750 Hz that is one 32th of the fundamental frequency.
The clock signal should be 468 750 Hz(- 10 Hz, + 15 Hz).
If the clock signal is out of the range, the X'tal (X601) should be replaced with new one.
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
49
5
Downloaded from www.Manualslib.com manuals search engine
FRONT OUTPUT
B.UP
GND
ACC
NC
NC
B.REM
NC
NC
2
1
RLFLRL+
FL+
RRFRRR+
FR+
6 4
5 3
9
10
11
12
13
14
15
16
1. BUS+
2. GND
3. GND
4. NC
5. BUS6. GND
7. BUS L+
8. ASENB
9. BUS R+
10. BUS R11. BUS L-
1 2 3 4
8 9 10 11
5 6
1
2
3
4
5
6
7
8
15 13 11 9 7
16 14 12 10 8
W/R
IP-BUS INPUT
1 0 A
SUBWOOFER OUTPUT
OR REAR OUTPUT
ANTENNA JACK
SW
5
7
DEH-P3800MP/XU/UC
53
7.2 PARTS
7.2.1 IC
- Pin Functions (PEG155B)
Pin No.
1
2
3,4
5
6
7
8
9
10,11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37,38
39
40
41-46
47
48
49-51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Pin Name
ILMPW
ejtin
ROT1,0
NC
FLPIM
SWVDD
BYTE
CNVSS
NC
reset
XOUT
VSS
XIN
VCC
nmi
dsens
bsens
asens
cd-reset
NC
brst
brxen
bsrq
PEE
RX2
NC
RX
TX
BSO
BSI
BSCK
KEYD
DPDT
KYDT
NC
PCL
ASENBO
NC
DALMON
SYSPW
NC
IPPW
MUTE
VST
VCK
VDT
NC
ROMDATA
ROMCK
ROMCS
NC
VCC
NC
VSS
ce@
I/O
O
I
I
Format
C
O
O
I
I
C
C
I
O
I
I
I
I
I
I
I
O
O
I/O
I
O
I
I
O
O
I
O
I
O
I
C
C
C
C
N
C
C
C
O
O
C
C
O
O
C
C
O
O
O
O
O
C
C
C
C
C
I/O
O
O
C
C
C
I
I
O
54
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Pin No.
66
67
68
69-85
86
87
88
89-91
92
93
94
95
96
97
98
99
100
Pin Name
CE1
TUNPCK
TUNPDI
NC
TUNPDO
NC
TESTIN
NC
SSENS
CSENS
KEYAD
MODEL
AVSS
SL
VREF
AVCC
NC
I/O
O
O
I
Format
C
C
I
I
I
I
I
I
I
81
100
* PEG155B
80
Format
C
N
meaning
C MOS
Nch open drain
50
31
51
N.C.
30
N.C.
BD4843G
Vref
VOUT
VDD
GND
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
55
1
2
Downloaded from www.Manualslib.com manuals search engine
56
IN3_R
IN2_R
IN1_R
MID
M.S.
BASS
Auto
Zero
M.S.S.
LOUDNESS
Gain
Adjuster
Anti-Alias
Filter
Volume
Primary
HPF
CLK
STB
DATA
Filter
Radiation
Anti-
AntiRadiation
Filter
Digital
Block
Volume
Secondary
Volume
Secondary
Volume
Secondary
Volume
Secondary
Volume
Secondary
Vref
Vcc
GND
FIE
FIE
&
Reference
Supply
Rear_R
FIE_R
Front_R
Rear_L
FIE_L
Front_L
Pre/SW_R
Pre/SW_L
Vp
Pref
PGND
Input Selector
TRE
Isolator
IN4-_R
IN4+_R
E
Isolator
IN4+_L
IN4-_L
LM_out
Level Meter
Phase inv.
LPF
IN1_L
IN2_L
IN3_L
1
3
- Block Diagram
PML015A
- Pin Layout
C
IN1_L 1
28 IN1_R
IN2_L 2
27 IN2_R
IN3_L 3
26 IN3_R
IN4+_L 4
25 IN4+_R
IN4-_L 5
24 IN4-_R
Front_L 6
23 Front_R
Rear_L 7
22 Rear_R
Vcc 8
21 STB
Vref 9
20 CLK
GND 10
19 DATA
FIE_L 11
18 FIE_R
Pre/SW_L 12
17 Pre/SW_R
Vp 13
16 LMout
Pref 14
15 PGND
DEH-P3800MP/XU/UC
stb
8
HA12241FP
VCC
7
-BUS
5
+BUS
6
BIAS
A
DRIVER
OUTPUT
(current)
RECEIVER
OUTPUT
2
R out
1
S1
COM
3
S2
4
GND
PAL007B
sw_vcc
Protector;
Over voltage
TAB
Reference
amp_vcc
OUT2-
3
5
VCC
OUT1-
7
12 13
IN4
14
IN3
15
AC-GND
16
OUT3+
17
P-GND3
18
OUT3-
19
VCC
OUT4+
20 21
MUTE
22
OUT4-
23
P-GND4
24 25
SWITCH
amp_vcc
S-GND
Protector;
Short circuit
Offset
Detection
Offset
Detection
-+
11
IN2
+-
10
IN1
-+
SVR
Offset
Detection
+-
OUT1+
-+
P-GND1
Protector;
Thermal
+-
OUT2+
Offset
Detection
-+
STBY
+-
P-GND2
Stand-by
Circuit
sw_vcc
stby
Protector;
Over current limit
Mute circuit
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
57
NJM2885DL1-33
NJM2388F84
A
VIN
VOUT
Thermal
Protection
+
-
ON/OFF
control
-+
Bandgap
Reference
Bandgap
Reference
GND
3
Over Voltage
Protection
B
CONT
IN
GND
OUT
Thermal
Protection
Over Current
Protection
Pin Name
SEG38-0
COM3-0
V1-3
VCC
NC
TXD
RXD
MOD0,1
RESET
X0,1
VSS
REM
NC
KDT4-1
KST6-1
SEG69-39
I/O
O
O
O
O
Format
O
I
C
C
I
O
O
C
N
75
25
51
meaning
C MOS
Nch open drain
50
26
Format
C
N
76
100
* PD6538A
58
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Pin Name
D.VDD
D1.GND
reset
AB12-8
AD7-0
cs
ASTB
read
write
wait
INTQ
IFMODE0,1
D1.VDD
DA.VDD
ROUT
DA.GND
REGC
DA.GND
LOUT
DA.VDD
X.VDD
XTAL
xtal
X.GND
VDDREG15
PWMSW0
TEST3-1
PWMSW1
TESTEN
D1.GND
DIN
DOUT
SCKIN
SCKO
LRCKIN
LRCK
xtalen
D1.VDD
RFCK/HOLD
WFCK/MIRR
PLCK/RFOK
LOCK/RFOK
C1D1/C8M/(RA13)
C1D2/C16M/(RA12)
C2D1/RMUTE
C2D2/LMUTE
C2D3/SHOCK
D1.GND
C33M
(rcs)
RA11
(CKE)
ras
cas)(LDQM)
cas!(UDQM)
I/O
I
I
I/O
I
I
I
I
O
O
I
I
O
I
I
I
I
I
O
I
O
I
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
59
Pin No.
70
71
72
73-88
89-99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120,121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
Pin Name
we
oe(cas)
D.GND
RDB0-15
RA0-10
D.VDD
FD+
FDTD+
TDSD+
SDMD+
MDREFOUTSV
AD.VDD
EFM
ASY
ATEST
RFI
AD.GND
AGCO
C3T
AGCI
RFO
EQ2,1
RF2RFA.GND
A
C
B
D
F
E
VREFIN
A.VDD
REFOUT
REFC
FEFEO
ADIN
TETEO
TE2
TEC
LD
PD
D.GND
I/O
O
O
I/O
O
O
O
O
O
O
O
O
O
O
O
I
O
I
O
O
I
O
I
I
I
I
I
I
I
I
I
I
O
I
I
O
I
I
O
O
I
O
I
109
144
* UPD63763CGJ
108
36
73
60
72
37
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
Pin Name
AVREF
AVSS
testin
CLAMP
EVDD
FMODE
FLRQ
IC/FLMD0
VDD
REGC
VSS
X1
X2
reset
XT1
XT2
PULLDOWN
ejsw
xint
NC
brst
BSI
BSO
bsck
FTxD
FRxD
BRXEN
bsrq
dspok
DSCSNS
8EJ(S905)
12EJ(S904)
EVSS
EVDD
SRAMLEVEL0,1
EMPH
emph
CDMUTE
LOEJ
CLCONT
HOME
adena
LRCKOK
SRAMLEVEL2
CD3VON(MCKRQ)
CONT
xrst
VDCONT
xsi
xso
xck
xwait
XASTB
AD0
INT
I/O
Format
I
I
I
I
C
I
I
I
O
I/O
O
I
I/O
I/O
C
/C
C
/C
/C
I
I
I
C
C
C
O
O
O
I
O
O
O
O
O
O
O
I
O
O
I
O
O
C
C
C
C
C
C
C
C
C
C
C
C
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
61
Pin No.
57
58
59
60,61
62
63
64-68
69
70
71-75
76
77-90
91-93
94
95
96,97
98
99
100
Pin Name
ROMDATA
ROMCK
ROMCS
NC
CLKOUT
LOCK
NC
BVSS
BVDD
NC
FLMD1
NC
A/D
csens
TYPE_A/D
NC
TEMP
VDSENS
DSCSNS
I/O
I/O
O
O
Format
I/O
/C
* PE5505A
Format
C
76
100
75
25
51
meaning
C MOS
50
26
NJM2886DL3-33
Thermal
Protection
-+
Bandgap
Reference
CONTROL
VIN
GND
VO
NC
62
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
NC
NC
NC
18 19 20 21
NC
14
DO
NC
DI
CK
SL
5V
OSC
11
IC 3 EEPROM
5.0V
AM ANT
10 9 8
CE1
ROM_VDD
CE2
NC
13
IC 5
3.3V
7 6
LPF
FMRF
ATT
Rch
IC 1
3.3V
FM ANT
ATT
FMRF
RF adj
AUDIOGND
NC
12
15
22
16
I/O Explain
I AM antenna input
2
3
4
5
6
7
8
9
10
11
12
13
RFGND
FMANT
VCC
SL
CE2
NC
CE1
CK
DI
NC
OSCGND
ROM_VDD
RF ground
FM antenna input
power supply
O signal level
I chip enable-2
non connection
I chip enable-1
I clock
I data in
non connection
osc ground
power supply
14
15
16
17
18
19
20
21
22
23
24
DO
O
DGND
NC
VDD_3.3
NC
NC
NC
NC
AUDIOGND
L ch
O
R ch
O
data out
digital ground
non connection
power supply
non connection
non connection
non connection
non connection
audio ground
L channel output
R channel output
CF52
VCC
DGND
OSCGND
RFGND
T51
No. Symbol
1 AMANT
23
DET, FM MPX
VDD_3.3
ANT adj
Lch
MIXER, IF AMP
3.3V
IC 4
3.3V 2.5V 2.5V
24
IC 2
2.5V
17
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
63
DEH-P3800MP/XU/UC
COMMON
S64
S63
S62
S61
S60
S59
S58
S57
S56
S55
S54
S53
S52
S51
S50
S49
S48
S47
S46
S45
S44
S43
S42
S41
S40
S39
S38
S37
S36
S35
S34
S33
S32
S31
S30
S29
S28
S27
S26
S25
S24
S23
S22
S21
S20
S19
S18
S17
S16
S15
S14
S13
S12
S11
S10
S9
S8
S7
S6
S5
S4
S3
S2
S1
S0
C3
C2
C1
C0
SEGMENT
C3
C2
C1
C0
1
2
Downloaded from www.Manualslib.com manuals search engine
64
F
E
D
C
B
A
- LCD(YAW5054)
7.2.2 DISPLAY
1
Power ON
VCC = 5V
Pin 16, 62
bsens
Pin 19
300 ms
SWVDDH
Pin 7
300 ms
In case of the above signal, the communication
with Grille microcomputer may fail.
If the time interval is not 300 msec, the oscillator
may be defective.
Source keys
operative
Source ON
E
SYSPWH
Pin 48
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
65
8. OPERATIONS
A
66
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
67
Fixing screw
(CBA1994)
Fixing screw
(CBA1994)
B
68
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3
DEH-P3800MP/XU/UC
5
Downloaded from www.Manualslib.com manuals search engine
69
- Jigs List
Name
Test Disc
L.P.F.
Jig No.
TCD-782
Remarks
Checking
g the g
grating
g
Checking
g the g
grating
g ((Two pieces))
- Grease List
Name
Grease
Grease
Jig No.
GEM1024
GEM1045
Remarks
CD Mechanism Module
CD Mechanism Module
Cleaning
g tools
Cleaning liquid : GEM1004
Cleaning
g paper
p p : GED-008
70
1
2
Downloaded from www.Manualslib.com manuals search engine
DEH-P3800MP/XU/UC
3