Professional Documents
Culture Documents
PREQUALIFIED
QUALIFIED BY TESTING
or PROCEDURE QUALIFICATION RECORDS (PQR) YES
.
.
Identification #
Revision
Date
Company Name:
Authorized by
Type - Manual
Mechaniza
POSITION
Type:
Date
Semiautomactic
Automatic
Position of Groove:
Single
Backing:
By
Double Weld
Yes
Vertical Progression:
Fillet:
Up
Down
No
Backing Material:
Root Openig
ELECTRICAL CHARACTERISTICS
Root Face Dimension
Groove Angle:
Radius (J - U)
Back Gouging:
Yes
No
Short-Circuiting
Globular
Method
Current:
AC
BASE METALS
Power Source:
Material Spec:
Other
Type or Grade
DCEP
CC
DCEN
Spray
Pulsed
CV
Thickness:
Groove
Diameter (Pipe)
Fillet
Size:
Type:
FILLER METALS
TECHNIQUE
AWS Specification
AWS Classification
Longitudinal
SHIELDING
Lateral
Flux
Gas
Angle
Composition
Flow Rate
Peening
Interpass Cleaning:
PREHEAT
Temp.
Max.
Time
WELDING PROCEDURE
Pass or
Weld
Layer(s)
Filler Metals
Process
Class
Diam.
Current
Type &
Polarity
Amps or Wire
Feed Speed
Volts
Travel
Speed
Joint Details
Test Results
TENSILE TEST
Specimen
No.
Width
Thickness
UltimateTensile
Load, lb
Area
Ultimate Unit
Stress, psi
Character of Failure
and Location
Type of Bend
Results
Remarks
VISUAL INSPECTION
Radiographic-ultrasonic examination
Appearance
Undercut
RT report No.:
Piping porosity
UT report No.:
Result
Result
FILLET WELD TEST RESULTS
Convexity
Test date
Witnessed by
Macroetch
1
Welder's name
Clock No.
Stamp No.
Tests conducted by
Test number
Per
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in conformance with the
requirements of Clause 4 of AWS D1.1/D1.1M, (______________) Structural Welding Code-Steel.
(year)
Signed
Manufacturer or Contractor
By
Title
Date
Identification No.
Rev.
Date
Record Actual Values
Used in Qualification
Qualification Range
Variables
Process/Type [Table 4.12, Item (1)]
Electrode (single or multiple) [Table 4.12, Item (7)]
Current/Polarity
Position [Table 4.12, Item (4)]
Weld Progression [Table 4.12, Item (5)]
Backing (YES or NO) [Table 4.12, Item (6)]
Material/Spec.
to
Base Metal
Thickness: (Plate)
Groove
Fillet
Thickness: (Pipe/tube)
Groove
Fillet
Diameter (Pipe)
Groove
Fillet
Filler Metal (Table 4.12)
Spec. No.
Class
F-No [Table 4.12, Item (2)]
Gas/Flux Type (Table 4.12)
Other
VISUAL INSPECTION (4.9.1)
Acceptable
YES or NO ______
Guided Bend Test Results (4.31.5)
Type
Result
Appearance
Fracture Test Root Penetration
Type
Result
(Describe the location, nature, and size of any crack or tearing of the specimen.)
Inspected by
Organization
Test Number
Date
RADIOGRAPHIC TEST RESULTS (4.31.3.2)
Number
Film Identification
Results
Inspected by
Organization
Remarks
Number
Film Identification
Results
Remarks
Test Number
Date
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested
in conformance with the requirements of Clause 4 of AWS D1.1/D1.1M, (______________) Structural Welding Code-Steel.
(year)
Manufacturer or Contractor
Authorized By
Date