Professional Documents
Culture Documents
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
REVISION
REV.
DOC. NO.
PESDPRTS662001
TAG NO.
662-VESE-005
SHEET
1 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
UNITS
GENERAL DATA
Test Separator
2 Tag No.
662-VESE-005
3 Configuration
1 x 100%
4 Type
5 Service
6 P&ID No.
PEDWPRTS662013
1 Name
(Note 1)
7
Case 140Mmscfd, 37kbopd, 3kbwpd
8 OPERATING DATA
9 Case Description
10 Operating Pressure
barg
35.0
11 Operating Temperature
52.4
12 Design Margin
13
14 DESIGN CONDITIONS
15 Design Pressure
(min./ max.)
16 Design Temperature
barg
FV/ 60
-15/ 110
17
18 GAS PROPERTIES
(Note 15)
-
HC Gas
kg/ h
174824
@ standard conditions
MMscfd
140.0
@ operating P & T
Am/ h
4730
kg/ kgmole
25.1
19 Fluid
20 Mass Flow Rate
21 Volumetric Flow Rate
(Note 3)
22
23 Molecular Weight
24 Density
@ operating conditions
kg/ m
37.0
25 Dynamic Viscosity
@ operating conditions
cP
0.014
26 Compressibility Factor
@ operating conditions
0.902
27 CO2 Content
mol%
19.8
28 H2S Content
mol%
29
30 HC LIQUID PROPERTIES
(Note 15)
HC Liquid
31 Fluid
kg/ h
193892
@ operating P & T
Am/ h
245.1
34 Density
@ operating conditions
kg/ m
791.0
35 Dynamic Viscosity
@ operating conditions
cP
1.594
36 Surface Tension
@ operating conditions
dyne/ cm
17.80
< -15
48
40 Asphaltene Content
mol %
0.5
41 Foaming Tendency
Yes (Note 7)
42 Emulsion Characteristic
Yes (Note 6)
20
37 Waxing Tendency
(Note 15)
Produced Water (Note 8)
46 Fluid
kg/ h
20119
@ operating P & T
Am/ h
19.9
49 Density
@ operating conditions
kg/ m
1012.4
50 Dynamic Viscosity
@ operating conditions
cP
0.570
51 Surface Tension
@ operating conditions
dyne/ cm
68.20
ppm
171,000 - 285,000
(Note 11)
(Note 4) USG/ MMscf
bar
< 0.1
< 0.35 (*)
[HOLD 2]
micron
< 10 [HOLD 2]
vol%
< 10
mg/l
1000
min
min
59 Allowable Water-in-Oil
63
64
(Note 13)
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS662001
TAG NO.
662-VESE-001A/B
SHEET
2 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
HP Separators
66 Tag No.
662-VESE-001A/B
67 Configuration
2 x 100% (Note 9)
68 Type
69 Service
70 P&ID No.
PEDWPRTS662002
65 Name
(Note 1)
71
Case 1 350MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
Case 3 600MMscfd,100kbopd,5kbwpd
Min. Flow
barg
35.0
35.0
35.0
75 Operating Temperature
52.4
52.4
52.4
76 Design Margin
72 OPERATING DATA
73 Case Description
74 Operating Pressure
77
78 DESIGN CONDITIONS
79 Design Pressure
(min./ max.)
80 Design Temperature
barg
FV/ 60
-15/ 110
81
83 Fluid
(Note 3)
86
Case 2 350MMscfd,100kbopd,5kbwpd
Case 3 600MMscfd,100kbopd,5kbwpd
HC Gas
kg/ h
484099
466609
@ standard conditions
MMscfd
384.6
373.0
316.6
@ operating P & T
Am/ h
12955
12623
10673
25.3
Case 1 350MMscfd,50kbopd,50kbwpd
(Note 12)
82 GAS PROPERTIES
398674
kg/ kgmole
25.3
25.1
88 Density
@ operating conditions
kg/ m
37.4
37.0
37.4
89 Dynamic Viscosity
@ operating conditions
cP
0.014
0.014
0.014
90 Compressibility Factor
@ operating conditions
87 Molecular Weight
0.900
0.902
0.901
91 CO2 Content
mol%
19.6
19.8
19.9
92 H2S Content
mol%
Case 1 350MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
Case 3 600MMscfd,100kbopd,5kbwpd
93
94 HC LIQUID PROPERTIES
(Note 12)
HC Liquid
95 Fluid
kg/ h
299256
595463
299183
@ operating P & T
Am/ h
380.0
752.8
379.3
98 Density
@ operating conditions
kg/ m
787.6
791.0
788.7
99 Dynamic Viscosity
@ operating conditions
cP
1.515
1.594
1.536
@ operating conditions
dyne/ cm
17.48
17.80
17.56
< -15
48
mol %
0.5
Yes (Note 7)
Yes (Note 6)
20
Case 1 350MMscfd,50kbopd,50kbwpd
(Note 12)
Case 2 350MMscfd,100kbopd,5kbwpd
Case 3 600MMscfd,100kbopd,5kbwpd
110 Fluid
kg/ h
412510
117532
58831
@ operating P & T
Am/ h
407.5
116.1
58.1
113 Density
@ operating conditions
kg/ m
1012.4
@ operating conditions
cP
0.570
@ operating conditions
dyne/ cm
68.20
ppm
171,000 - 285,000
(Note 11)
(Note 4) USG/ MMscf
bar
< 0.1
< 0.35 (*)
[HOLD 2]
micron
< 10 [HOLD 2]
vol%
< 10
mg/l
1000
min
min
127
128
(Note 13)
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
DOC. NO.
PESDPRTS662001
TAG NO.
662-VESE-002
SHEET
3 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
REVISION
REV.
4:09PM
UNITS
GENERAL DATA
IP Separator
662-VESE-002
131 Configuration
1 X 100%
132 Type
133 Service
PEDWPRTS662005
129 Name
(Note 1)
135
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
Min. Flow
barg
9.0
9.0
49.8
49.6
0.0
141
142 DESIGN CONDITIONS
143 Design Pressure
(min./ max.)
barg
FV/ 15
-15/ 110
145
Case 1 600MMscfd,100kbopd,5kbwpd
147 Fluid
kg/ h
21263
@ standard conditions
MMscfd
13.8
7.1
@ operating P & T
Am/ h
1761
907
31.0
(Note 3)
150
Case 2 350MMscfd,50kbopd,50kbwpd
HC Gas
10995
kg/ kgmole
31.0
152 Density
@ operating conditions
kg/ m
12.1
12.1
@ operating conditions
cP
0.013
0.013
@ operating conditions
0.956
0.956
mol%
26.1
25.6
mol%
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
157
158 HC LIQUID PROPERTIES
HC Liquid
159 Fluid
kg/ h
580647
290558
@ operating P & T
Am/ h
728.2
364.9
162 Density
@ operating conditions
kg/ m
797.4
796.3
@ operating conditions
cP
2.051
2.013
@ operating conditions
dyne/ cm
20.81
20.69
< -15
48
mol %
0.5
Yes (Note 7)
Yes (Note 6)
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
174 Fluid
kg/ h
83376
@ operating P & T
Am/ h
82.4
177 Density
@ operating conditions
kg/ m
@ operating conditions
cP
0.595
@ operating conditions
dyne/ cm
68.50
ppm
171,000 - 285,000
41725
41.2
1012.4
181
182 PERFORMANCE REQUIREMENTS
183 Liquid Entrainment in Gas
(Note 11)
(Note 4) USG/ MMscf
bar
< 0.1
< 0.35 (*)
[HOLD 2]
micron
< 10 [HOLD 2]
vol%
<5
mg/l
1000
min
min
191
192
(Note 13)
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
DOC. NO.
PESDPRTS662001
TAG NO.
662-VESE-003
SHEET
4 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
REVISION
REV.
4:09PM
UNITS
GENERAL DATA
LP Separator
662-VESE-003
195 Configuration
1 X 100%
196 Type
197 Service
193 Name
(Note 1)
199
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
Min. Flow
barg
1.15
1.15
88.5
88.6
205
206 DESIGN CONDITIONS
207 Design Pressure
(min./ max.)
barg
FV/ 15
-15/ 110
209
Case 1 600MMscfd,100kbopd,5kbwpd
211 Fluid
kg/ h
51953
@ standard conditions
MMscfd
23.2
12.4
@ operating P & T
Am/ h
15691
8435
45.4
(Note 3)
214
Case 2 350MMscfd,50kbopd,50kbwpd
HC Gas
28129
kg/ kgmole
45.0
216 Density
@ operating conditions
kg/ m
3.3
3.3
@ operating conditions
cP
0.010
0.010
@ operating conditions
0.979
0.979
mol%
8.1
7.7
mol%
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
221
222 HC LIQUID PROPERTIES
HC Liquid
223 Fluid
kg/ h
556367
278247
@ operating P & T
Am/ h
718.0
359.3
226 Density
@ operating conditions
kg/ m
774.9
774.4
@ operating conditions
cP
1.376
1.363
@ operating conditions
dyne/ cm
20.60
20.54
< -15
48
mol %
0.5
Yes (Note 7)
Yes (Note 6)
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
238 Fluid
kg/ h
99006
@ operating P & T
Am/ h
99.9
241 Density
@ operating conditions
kg/ m
991.5
@ operating conditions
cP
0.351
@ operating conditions
dyne/ cm
61.70
ppm
171,000 - 285,000
83655
84.4
245
246 PERFORMANCE REQUIREMENTS
247 Liquid Entrainment in Gas
(Note 11)
(Note 4) USG/ MMscf
bar
< 0.1
< 0.35 (*) (Note 17)
[HOLD 2]
micron
< 10 [HOLD 2]
vol%
mg/l
1000
min
min
255
256
(Note 13)
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
DOC. NO.
PESDPRTS662001
TAG NO.
662-VECA-004
SHEET
5 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
REVISION
REV.
4:09PM
UNITS
GENERAL DATA
Electrostatic Treater
662-VECA-004
259 Configuration
1 X 100%
260 Type
261 Service
257 Name
(Note 1)
263
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
Max. Liquid
Min. Liquid
barg
4.1
4.1
88.7
88.8
269
270 DESIGN CONDITIONS
271 Design Pressure
(min./ max.)
barg
FV/ 15
-15/ 110
273
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
kg/ h
@ standard conditions
MMscfd
@ operating P & T
Am/ h
kg/ kgmole
@ operating conditions
kg/ m
@ operating conditions
cP
@ operating conditions
mol%
mol%
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
285
286 HC LIQUID PROPERTIES
HC Liquid
287 Fluid
kg/ h
552065
275845
@ operating P & T
Am/ h
709.5
354.8
290 Density
@ operating conditions
kg/ m
778.1
777.6
@ operating conditions
cP
1.452
1.439
@ operating conditions
dyne/ cm
20.96
20.90
< -15
48
mol %
0.5
Yes (Note 7)
Yes (Note 6)
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
302 Fluid
kg/ h
61748
@ operating P & T
Am/ h
62.3
305 Density
@ operating conditions
kg/ m
991.5
@ operating conditions
cP
0.351
@ operating conditions
dyne/ cm
61.70
ppm
171,000 - 285,000
54815
55.3
309
310 PERFORMANCE REQUIREMENTS
(Note 11)
USG/ MMscf
bar
Minimum (*)
micron
vol%
< 0.4
mg/l
1000
min
(*)
min
(*)
319
320
(Note 13)
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
REVISION
REV.
4:09PM
DOC. NO.
PESDPRTS662001
TAG NO.
(Note 1)
SHEET
6 OF 6
QUANTITY
(Note 1)
LSC
30/7/2014
C1
UNITS
SPECIAL REQUIREMENTS
321 Inlet Device
(yes/ no)
Yes
(where applicable)
(*)
(yes/ no)
Yes
No
(yes/ no)
Yes (Note 4)
(yes/ no)
Yes (*)
(submerged/ overflow)
Submerged (Note 4)
(*)
(tangent-to-tangent)
(*)
(vessel)
(Note 14)
(internals)
334 Length
(Note 14)
6.5 (Note 5)
years
20
339
340
NOTES:
341 1.
VENDOR to select and supply internals to these separators and Electrostatic Treater:
342
343
- HP Separators (662-VESE-001A/B)
344
- IP Separator (662-VESE-002)
345
- LP Separator (662-VESE-003)
346
347 2.
VENDOR to confirm the internal design and outlet performance for all separators and Electrostatic Treater.
348 3.
349 4.
350 5.
VENDOR to ensure that all design satisfy the required design specifications under the given roll motion conditions.
351 6.
352 7.
353 8.
For produced water properties, dissolved salts have not been taken into account. The produced water properties are based on operating temperature,
354
obtained from Saline Water Conversion Engineering Data Book Second Edition.
355 9.
HP Separator will be 2 x 100% under nominal gas case and 2 x 50% for maximum gas case.
356 10. Wax tendency exists, thus Wiremesh shall not be selected as demister, VENDOR to consider wax potential when specifying materials.
357 11. VENDOR to advise the minimum turndown that can be expected while achieving same performance specifications.
358 12. Quoted flowrate and properties are for one vessel.
359 13. VENDOR to advise optimum BS&W that can be achieved by their proposed design.
360 14. Material of construction of vessels are as follow:
361
CS + SS316 Clad
362
b) HP Separators (662-VESE-001A/B)
CS + SS316 Clad
363
c) IP Separator (662-VESE-002)
364
d) LP Separator (662-VESE-003)
365
366 15. Sizing basis is in accordance to design flowrate specified in the client BOD for Production/ Test/ Flowline Circulation Return Swivel.
367 16. Each HP Separator is sized for handling capacity to achieve 350MMscfd gas injection rate and 100,000bpd dead oil at stock tank.
368 17. Pressure drop shall be as minimum as possible than allowable.
369 18. Wash water has salinity of 800 mg/l.
370
371
372
373
374
375
376
377
HOLDS:
378 1.
VENDOR to confirm the separator and Electrostatic Treater internals to achieve the required outlet dry gas specification.
379 2.
380
381
382
383
384
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS771001
TAG NO.
771-VESB-601A/B
SHEET
1 OF 7
QUANTITY
2 x 50%
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
2 Tag No.
771-VESB-601A/B
3 Configuration
2 x 50%
4 Type
5 Service
Liquid Removal
6 P&ID No.
PEDWPRTS771002
1 Name
(Note 1)
7
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
9 Case Description
Max. Flow
Min. Flow
10 Operating Pressure
barg
0.3
0.3
11 Operating Temperature
45.8
45.8
12 Design Margin
8 OPERATING DATA
13
14 DESIGN CONDITIONS
15 Design Pressure
(min./ max.)
16 Design Temperature
barg
FV/ 15
-15/ 85
17
18 GAS PROPERTIES
Case 1 600MMscfd,100kbopd,5kbwpd
(Note 9)
19 Fluid
(Note 3)
22
@ standard conditions
@ operating P & T
Case 2 350MMscfd,50kbopd,50kbwpd
HC Gas
kg/ h
20088
MMscfd
7.9
10827
4.2
Am/ h
7827
4182
51.2
kg/ kgmole
50.8
24 Density
@ operating conditions
kg/ m
2.6
2.6
25 Dynamic Viscosity
@ operating conditions
cP
0.009
0.009
26 Compressibility Factor
@ operating conditions
23 Molecular Weight
0.979
0.979
27 CO2 Content
mol%
11.8
11.2
28 H2S Content
mol%
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
29
30 HC LIQUID PROPERTIES
(Note 9)
HC Liquid
31 Fluid
kg/ h
3240
@ operating P & T
Am/ h
4.60
2.57
34 Density
@ operating conditions
kg/ m
705.0
703.8
35 Dynamic Viscosity
@ operating conditions
cP
0.374
0.371
36 Surface Tension
@ operating conditions
dyne/ cm
19.81
1806
19.72
Yes
< -15
48
40 Asphaltene Content
mol %
0.5
41 Foaming Tendency
No
42 Emulsion Characteristic
No
37 Waxing Tendency
43
44 WATER PROPERTIES
Case 1 600MMscfd,100kbopd,5kbwpd
(Note 9)
Case 2 350MMscfd,50kbopd,50kbwpd
Water
45 Fluid
kg/ h
2648
@ operating P & T
Am/ h
2.67
1.44
48 Density
@ operating conditions
kg/ m
991.5
991.5
49 Dynamic Viscosity
@ operating conditions
cP
0.585
0.585
50 Surface Tension
@ operating conditions
dyne/ cm
68.46
ppm
1431
68.47
-
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS771001
TAG NO.
771-VESB-603A/B
SHEET
2 OF 7
QUANTITY
2 x 50%
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
62 Tag No.
771-VESB-603A/B
63 Configuration
2 x 50%
64 Type
65 Service
Liquid Removal
66 P&ID No.
PEDWPRTS771006
61 Name
(Note 1)
67
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
Max. Flow
Min. Flow
barg
6.6
6.6
71 Operating Temperature
49.1
49.1
72 Design Margin
68 OPERATING DATA
69 Case Description
70 Operating Pressure
73
74 DESIGN CONDITIONS
75 Design Pressure
(min./ max.)
76 Design Temperature
barg
FV/ 20
-15/ 90
77
78 GAS PROPERTIES
Case 1 600MMscfd,100kbopd,5kbwpd
(Note 9)
79 Fluid
(Note 3)
82
@ standard conditions
@ operating P & T
Case 2 350MMscfd,50kbopd,50kbwpd
HC Gas
kg/ h
24886
MMscfd
12.9
13032
6.7
Am/ h
2131
1107
38.9
kg/ kgmole
38.6
84 Density
@ operating conditions
kg/ m
11.7
11.8
85 Dynamic Viscosity
@ operating conditions
cP
0.011
0.011
86 Compressibility Factor
@ operating conditions
83 Molecular Weight
0.940
0.939
87 CO2 Content
mol%
20.9
20.4
88 H2S Content
mol%
Case 1 600MMscfd,100kbopd,5kbwpd
Case 2 350MMscfd,50kbopd,50kbwpd
89
90 HC LIQUID PROPERTIES
(Note 9)
HC Liquid
91 Fluid
kg/ h
5402
@ operating P & T
Am/ h
8.42
4.80
94 Density
@ operating conditions
kg/ m
641.4
638.4
95 Dynamic Viscosity
@ operating conditions
cP
0.231
0.227
96 Surface Tension
@ operating conditions
dyne/ cm
14.27
3061
14.09
Yes
< -15
48
mol %
0.5
No
No
97 Waxing Tendency
103
104 WATER PROPERTIES
Case 1 600MMscfd,100kbopd,5kbwpd
(Note 9)
Case 2 350MMscfd,50kbopd,50kbwpd
Water
105 Fluid
kg/ h
432
231
@ operating P & T
Am/ h
0.44
0.23
108 Density
@ operating conditions
kg/ m
989.3
989.3
@ operating conditions
cP
0.552
0.552
@ operating conditions
dyne/ cm
67.86
ppm
67.86
-
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS771001
TAG NO.
771-VESB-101A/B/C
SHEET
3 OF 7
QUANTITY
3 x 50%
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
122 Type
123 Service
Liquid Removal
PEDWPRTS771011
121 Name
(Note 1)
125
Case 1 600MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
Max. Flow
Min. Flow
771-VESB-101A/B/C
771-VESB-101A/B/C
3 x 33.3%
3 x 50%
barg
33.2
33.2
49.8
129 Configuration
130 Operating Pressure
49.8
0
133
134 DESIGN CONDITIONS
135 Design Pressure
(min./ max.)
barg
FV/ 60
-15/ 75
137
138 GAS PROPERTIES
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 9)
139 Fluid
(Note 3)
142
@ standard conditions
@ operating P & T
Case 2 350MMscfd,100kbopd,5kbwpd
HC Gas
kg/ h
281103
256299
MMscfd
219.5
198.8
Am/ h
7718
6981
kg/ kgmole
25.7
25.9
144 Density
@ operating conditions
kg/ m
36.4
36.7
@ operating conditions
cP
0.014
0.014
@ operating conditions
0.898
0.897
mol%
19.7
19.9
mol%
Case 1 600MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
149
150 HC LIQUID PROPERTIES
(Note 6)
151 Fluid
kg/ h
@ operating P & T
Am/ h
154 Density
@ operating conditions
kg/ m
@ operating conditions
cP
@ operating conditions
dyne/ cm
mol %
163
164 WATER PROPERTIES
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 9)
Case 2 350MMscfd,100kbopd,5kbwpd
Water
165 Fluid
kg/ h
121
191
@ operating P & T
Am/ h
0.12
0.19
168 Density
@ operating conditions
kg/ m
990.1
990.1
@ operating conditions
cP
0.583
0.583
@ operating conditions
dyne/ cm
67.65
ppm
67.65
-
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS771001
TAG NO.
771-VESB-102A/B/C
SHEET
4 OF 7
QUANTITY
3 x 50%
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
182 Type
183 Service
Liquid Removal
PEDWPRTS771015
181 Name
(Note 1)
185
Case 1 600MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
Recycle Mode
Min. Flow
771-VESB-102A/B/C
771-VESB-102A/B/C
3 x 33.3%
3 x 50%
barg
87.0
87.0
13.0
barg
FV/ 241
-46/ 65
189 Configuration
190 Operating Pressure
34.6
193
194 DESIGN CONDITIONS
195 Design Pressure
(min./ max.)
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 9)
-
199 Fluid
Case 2 350MMscfd,100kbopd,5kbwpd
HC Gas
kg/ h
311566
225879
MMscfd
245.8
175.0
Am/ h
2068
1799
kg/ kgmole
25.5
25.9
@ operating conditions
kg/ m
150.6
125.6
@ operating conditions
cP
0.017
0.017
@ operating conditions
0.625
0.710
mol%
19.8
20.0
mol%
Case 2 350MMscfd,100kbopd,5kbwpd
(Note 3)
202
@ standard conditions
@ operating P & T
209
210 HC LIQUID PROPERTIES
(Note 9)
HC Liquid
211 Fluid
kg/ h
3043
@ operating P & T
Am/ h
5.95
214 Density
@ operating conditions
kg/ m
511.1
@ operating conditions
cP
0.102
@ operating conditions
dyne/ cm
6.42
Yes
< -15
48
mol %
0.5
No
No
223
224 WATER PROPERTIES
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 6)
Case 2 350MMscfd,100kbopd,5kbwpd
225 Fluid
kg/ h
@ operating P & T
Am/ h
228 Density
@ operating conditions
kg/ m
@ operating conditions
cP
@ operating conditions
dyne/ cm
ppm
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
PESDPRTS771001
TAG NO.
771-VESB-103A/B/C
SHEET
5 OF 7
QUANTITY
3 x 50%
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
GENERAL DATA
242 Type
243 Service
Liquid Removal
PEDWPRTS771018
241 Name
(Note 1)
245
Case 1 600MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
Max. Flow
Min. Flow
771-VESB-103A/B/C
771-VESB-103A/B/C
3 x 33.3%
3 x 50%
barg
188.4
188.4
34.9
barg
FV/ 362
-46/ 65
249 Configuration
250 Operating Pressure
34.9
253
254 DESIGN CONDITIONS
255 Design Pressure
(min./ max.)
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 9)
259 Fluid
(Note 3)
262
@ standard conditions
@ operating P & T
Case 2 350MMscfd,100kbopd,5kbwpd
HC Gas
kg/ h
256426
225879
MMscfd
200.0
175.0
Am/ h
890
776
kg/ kgmole
25.7
25.9
264 Density
@ operating conditions
kg/ m
288.0
291.2
@ operating conditions
cP
0.029
0.030
@ operating conditions
0.661
0.658
mol%
19.8
20.0
mol%
Case 1 600MMscfd,50kbopd,50kbwpd
Case 2 350MMscfd,100kbopd,5kbwpd
269
270 HC LIQUID PROPERTIES
(Note 6)
271 Fluid
kg/ h
@ operating P & T
Am/ h
274 Density
@ operating conditions
kg/ m
@ operating conditions
cP
@ operating conditions
dyne/ cm
C.
mol %
283
284 WATER PROPERTIES
Case 1 600MMscfd,50kbopd,50kbwpd
(Note 6)
Case 2 350MMscfd,100kbopd,5kbwpd
285 Fluid
kg/ h
@ operating P & T
Am/ h
288 Density
@ operating conditions
kg/ m
@ operating conditions
cP
@ operating conditions
dyne/ cm
ppm
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
REVISION
REV.
DOC. NO.
PESDPRTS771001
TAG NO.
777-VESB-001
SHEET
6 OF 7
QUANTITY
1 x 100%
LSC
30/7/2014
C1
UNITS
GENERAL DATA
301 Name
(Note 1)
777-VESB-001
1 x 100%
304 Type
305 Service
Liquid Removal
PEDWPRTS777001
303 Configuration
(Note 11)
307
308 OPERATING DATA
-
barg
45.1
9.0
313
314 DESIGN CONDITIONS
315 Design Pressure
(min./ max.)
barg
FV/ 50
-15/ 70
HC Gas
kg/ h
68863
317
318 GAS PROPERTIES
319 Fluid
320 Mass Flow Rate
321 Volumetric Flow Rate
(Note 3)
322
@ standard conditions
@ operating P & T
MMscfd
55.0
Am/ h
1102
kg/ kgmole
25.2
324 Density
@ operating conditions
kg/ m
62.5
@ operating conditions
cP
0.013
@ operating conditions
0.792
mol%
20.2
mol%
329
330 HC LIQUID PROPERTIES
HC Liquid
331 Fluid
kg/ h
3759
@ operating P & T
Am/ h
6.23
334 Density
@ operating conditions
kg/ m
603.3
@ operating conditions
cP
0.166
@ operating conditions
dyne/ cm
10.28
Yes
< -15
48
mol %
0.5
No
No
343
344 WATER PROPERTIES
Water
345 Fluid
kg/ h
203
@ operating P & T
Am/ h
0.20
348 Density
@ operating conditions
kg/ m
1022.8
@ operating conditions
cP
1.247
@ operating conditions
dyne/ cm
74.50
ppm
4:09PM
PREPARED
SYW
LOCATION
CHECKED
CAW
PROJECT NO.
ES46148
APPROVED
CLIENT
DATE
(Note 4)
PERFORMANCE REQUIREMENTS
PESDPRTS771001
TAG NO.
(Note 1)
SHEET
7 OF 7
QUANTITY
(Note 1)
LSC
30/7/2014
C1
REVISION
REV.
DOC. NO.
UNITS
USG/ MMscf
bar
98
micron
10
min
366
367 SPECIAL REQUIREMENTS
368 Inlet Device
Yes (Note 8)
(yes/ no)
Yes
(where applicable)
(*)
(yes/ no)
Yes
(*)
(tangent-to-tangent)
(*)
(vessel)
(internals)
316 / 316L SS
6.5 (Note 5)
years
20
377 Height
NOTES:
384 1.
385
386
387
388
389
390
391 2.
VENDOR to confirm the scrubber internals to achieve the required outlet dry gas specification.
392 3.
393 4.
VENDOR to advise the minimum turndown that can be expected while achieving same performance specifications.
394 5.
VENDOR to ensure that all design satisfy the required design specifications under the given roll motion conditions.
395 6.
396 7.
Vessel is to be sized to have sufficient hold-up of fuel gas for 45 seconds (from PALL at 38.5 barg to 43.5 barg) to enable a smooth changeover of the power
397
generator turbines and steam boiler from fuel gas to liquid fuel.
398 8.
Wiremesh demisters shall not be selected for compressor scrubbers due to the potential damage to the compressor if the wiremesh breaks up. For the use
399
of vane pack demister, SBM practice is to limit it to 70 barg; beyond which, cyclonic type demister will be used. VENDOR to advise on the maximum pressure
400
that vane pack type demister can be used without compromising the performance expected.
401 9.
402 10. Hydrocarbon liquid stream is referenced from possible maximum liquid flow case during recycling mode.
403 11. The design code for HP2 & HP3 Comp. Suction Scrubber to be ASME Section VIII Div. 2
404
405
406
407
408
409
410
411
412
413
HOLDS:
414
415
416
417
418
419
420